rint_script_decibels.asv

%% cell constants
T_amb=293.15;                   %Ambient Temperature in Kelvin
Capacity=31000;                 %cell initial capacity in mAh
cell_length=0.227;               %cell length in meters
cell_width=0.226;                   %cell width in meters
cell_thickness=0.0078;              %cell thickness in meters
area_cell=cell_length*cell_width;       %cell surface area in meter^2
cell_volume=area_cell*cell_thickness;   %cell volume in m^3
m_cell=0.72;                            %mass of cell in kg
Cp_cell=810.5328;               %cell specific heat capacity J/(KgK)
h_cell=5;                       %convective heat transfer coefficient in W/m^2/K


%% Lookup table data 
SOC_LUT=[0; 0.1; 0.25; 0.5; 0.75; 0.9; 1.0];    %state of charge lookup table data 
OCV_LUT=[3.49; 3.55; 3.62; 3.71; 3.91; 4.17; 4.19];    %ocv lookup table data
R_int_LUT=[0.0085; 0.0085; 0.0087; 0.0082; 0.0083; 0.0085]; %internal resistance lookup table data

%% setting the model runtime (set_param is used for setting the model run time)
set_param('Rint_model_decibel', 'StopTime', '3600')

%% Model simulation 
sim 'Rint_Model'

%% Results
figure(1)
plot(ans.soc(:,1), ans.soc(:,2))
xlabel ('time(s)')
ylabel('state of charge(%))')
grid on


figure(2)
plot(ans.ocv(:,1), ans.ocv(:,2))
xlabel ('time(s)')
ylabel('open circuit voltage(V))')
grid on


figure(3)
plot(ans.temp(:,1), ans.temp(:,2))
xlabel ('time(s)')
ylabel('Temperature(K))')
grid on


figure(4)
plot(ans.ploss(:,1), ans.ploss(:,2))
xlabel ('time(s)')
ylabel('power loss(watts))')
grid on



figure(5)
plot(ans.rint(:,1), ans.rint(:,2))
xlabel ('time(s)')
ylabel('internal resistance(ohms))')
grid on


figure(6)
plot(ans.vt(:,1), ans.vt(:,2))
xlabel ('time(s)')
ylabel('terminsl voltage(V))')
grid on