ASR failed when restore iPad 1 to iOS 3.2.2 with blobs #1156

AHH-LONG-DEE · 2026-08-08T13:57:47Z

AHH-LONG-DEE
Aug 8, 2026

iPad 1 failed to restore to iOS 3.2.2. Please help me!

Well i am trying to install a fresh iOS 3.2.2 install here on my iPad 1. However it will always fail. I am still be able to restore this morning and suddeltly it won't let me restore to it anymore. Restore to iOS 5.1.1 works just fine, there is no hardware damage in my iPad. Here is the log. Please help me, thank you!

*** Legacy iOS Kit ***

- Script by LukeZGD -

* Version: v26.08.15 (d3580ca)

* Platform: linux (Ubuntu 24.04.1 LTS - x86_64)

* Device: iPad 1 (iPad1,1 - k48ap) in DFU mode

[WARNING] Your device is an iPad1,1. These devices are affected by an activation issue.

* Existing activation records detected. Activation Records stitching enabled.

* iOS Version: Unknown

* To get iOS version, go to: Misc Utilities -> Get iOS Version

* ECID: 37xxxxxxxxxxx

* Only select unmodified IPSW for the selection. Do not select custom IPSWs

* Selected Target IPSW: /home/emchaoalong/Downloads/iPad1,1_3.2.2_7B500_Restore(1).ipsw

* Target Version: 3.2.2-7B500

* Selected Target IPSW is validated

* Selected Target SHSH: /home/emchaoalong/Schreibtisch/Legacy-iOS-Kit_v26.05.23/saved/shsh/37xxxxxxxxxxxiPad1,1-7B500.shsh

* Selected SHSH file is validated

* This restore will have baseband update disabled

> Main Menu > Restore/Downgrade > Other (Use SHSH Blobs)

[Input] Select an option:

Select Target IPSW

Select Target SHSH

-> (*) Start Restore

Go Back

[Input] Jailbreak Option

* When this option is enabled, your device will be jailbroken on restore.

* I recommend to enable this option to have the jailbreak and Cydia pre-installed.

* This option is enabled by default (Y). Select this option if unsure.

[Input] Enable this option? (Y/n):

Yes

-> No

[Log] Jailbreak option disabled by user.

[Input] Memory Option for creating custom IPSW

* When this option is enabled, system RAM will be used for the IPSW creation process.

* I recommend to enable this option to speed up creating the custom IPSW.

* However, if your PC/Mac has less than 8 GB of RAM, disable this option.

* This option is enabled by default (Y). Select this option if unsure.

[Input] Enable this option? (Y/n):

-> Yes

No

[Log] Memory option enabled.

[Log] Dumping files for activation: /private/var/containers/Data/System/*/Library/activation_records

[Log] Found existing dumped activation: ../saved/iPad1,1/activation-37xxxxxxxxxxx.tar

[Log] CPU: AMD Ryzen 5 4600H with Radeon Graphics

* Include this in your log/screenshot for pwning assistance if needed.

[Log] Placing device to pwnDFU mode using primepwn

* If pwning fails and gets stuck, you can press Ctrl+C to cancel, then re-enter DFU and retry.

*** primepwn by LukeZGD ***

Acquiring device handle.

*** based on SHAtter exploit (segment overflow) by posixninja and pod2g ***

Resetting USB counters.

Getting 0x40 bytes of data from device.

Performing USB port reset.

Releasing device handle.

Acquiring device handle.

Requesting image validation.

Performing USB port reset.

Releasing device handle.

Acquiring device handle.

Getting 0x2c000 bytes of data from device.

Releasing device handle.

Acquiring device handle.

Resetting USB counters.

Getting 0x140 bytes of data from device.

Performing USB port reset.

Releasing device handle.

Acquiring device handle.

Requesting image validation.

Performing USB port reset.

Releasing device handle.

Acquiring device handle.

Sending 0x1cc bytes of data to device.

Getting 0x2c000 bytes of data from device.

Releasing device handle.

Acquiring device handle.

Releasing device handle.

Device is now in pwned DFU mode.

[Log] Checking for device

[Log] Found device in pwned DFU mode.

* Pwned: SHAtter

[Log] Found existing Custom IPSW. Skipping IPSW creation.

[Log] Starting multipatch

[Log] Checking URL in ../saved/firmware/iPad1,1/7B500/url

[Log] Extracting BuildManifest...

Archive: temp.ipsw

inflating: ./BuildManifest.plist

[Log] ramdisk_name: 018-8375-001.dmg

[Log] rootfs_name: 018-8370-001.dmg

[Log] Extracting ramdisk from IPSW

Archive: temp.ipsw

extracting: ./018-8375-001.dmg

[Log] Checking multipatch

[Log] Already multipatched

[Log] Device iPad1,1 has no baseband/disabled baseband update

[Log] Extracting IPSW: ../iPad1,1_3.2.2_7B500_CustomA-3723569450415.ipsw

Archive: ../iPad1,1_3.2.2_7B500_CustomA-3723569450415.ipsw

extracting: ../iPad1,1_3.2.2_7B500_CustomA-3723569450415/018-8370-001.dmg

inflating: ../iPad1,1_3.2.2_7B500_CustomA-3723569450415/018-8374-001.dmg

extracting: ../iPad1,1_3.2.2_7B500_CustomA-3723569450415/018-8375-001.dmg

inflating: ../iPad1,1_3.2.2_7B500_CustomA-3723569450415/BuildManifest.plist

creating: ../iPad1,1_3.2.2_7B500_CustomA-3723569450415/Downgrade/

extracting: ../iPad1,1_3.2.2_7B500_CustomA-3723569450415/Downgrade/RestoreDeviceTree

extracting: ../iPad1,1_3.2.2_7B500_CustomA-3723569450415/Downgrade/RestoreKernelCache

creating: ../iPad1,1_3.2.2_7B500_CustomA-3723569450415/Firmware/

creating: ../iPad1,1_3.2.2_7B500_CustomA-3723569450415/Firmware/all_flash/

creating: ../iPad1,1_3.2.2_7B500_CustomA-3723569450415/Firmware/all_flash/all_flash.k48ap.production/

inflating: ../iPad1,1_3.2.2_7B500_CustomA-3723569450415/Firmware/all_flash/all_flash.k48ap.production/DeviceTree.k48ap.img3

inflating: ../iPad1,1_3.2.2_7B500_CustomA-3723569450415/Firmware/all_flash/all_flash.k48ap.production/LLB.k48ap.RELEASE.img3

inflating: ../iPad1,1_3.2.2_7B500_CustomA-3723569450415/Firmware/all_flash/all_flash.k48ap.production/applelogo.s5l8930x.img3

inflating: ../iPad1,1_3.2.2_7B500_CustomA-3723569450415/Firmware/all_flash/all_flash.k48ap.production/batterycharging0.s5l8930x.img3

inflating: ../iPad1,1_3.2.2_7B500_CustomA-3723569450415/Firmware/all_flash/all_flash.k48ap.production/batterycharging1.s5l8930x.img3

inflating: ../iPad1,1_3.2.2_7B500_CustomA-3723569450415/Firmware/all_flash/all_flash.k48ap.production/batteryfull.s5l8930x.img3

inflating: ../iPad1,1_3.2.2_7B500_CustomA-3723569450415/Firmware/all_flash/all_flash.k48ap.production/batterylow0.s5l8930x.img3

inflating: ../iPad1,1_3.2.2_7B500_CustomA-3723569450415/Firmware/all_flash/all_flash.k48ap.production/batterylow1.s5l8930x.img3

inflating: ../iPad1,1_3.2.2_7B500_CustomA-3723569450415/Firmware/all_flash/all_flash.k48ap.production/glyphcharging.s5l8930x.img3

inflating: ../iPad1,1_3.2.2_7B500_CustomA-3723569450415/Firmware/all_flash/all_flash.k48ap.production/glyphplugin.s5l8930x.img3

inflating: ../iPad1,1_3.2.2_7B500_CustomA-3723569450415/Firmware/all_flash/all_flash.k48ap.production/iBoot.k48ap.RELEASE.img3

inflating: ../iPad1,1_3.2.2_7B500_CustomA-3723569450415/Firmware/all_flash/all_flash.k48ap.production/manifest

inflating: ../iPad1,1_3.2.2_7B500_CustomA-3723569450415/Firmware/all_flash/all_flash.k48ap.production/needservice.s5l8930x.img3

inflating: ../iPad1,1_3.2.2_7B500_CustomA-3723569450415/Firmware/all_flash/all_flash.k48ap.production/recoverymode-768x1024.s5l8930x.img3

creating: ../iPad1,1_3.2.2_7B500_CustomA-3723569450415/Firmware/dfu/

extracting: ../iPad1,1_3.2.2_7B500_CustomA-3723569450415/Firmware/dfu/iBEC.k48ap.RELEASE.dfu

extracting: ../iPad1,1_3.2.2_7B500_CustomA-3723569450415/Firmware/dfu/iBSS.k48ap.RELEASE.dfu

inflating: ../iPad1,1_3.2.2_7B500_CustomA-3723569450415/Restore.plist

inflating: ../iPad1,1_3.2.2_7B500_CustomA-3723569450415/kernelcache.release.k48

[Log] Checking URL in ../saved/firmware/iPad1,1/9B206/url

[Log] Checking firmware keys in ../saved/firmware/iPad1,1/9B206

[Log] Decrypting iBSS...

/home/runner/work/daibutsuCFW/daibutsuCFW/src/xpwn/ipsw-patch/img3.c:createAbstractFileFromImg3:643: dc219cae3a0760e26d1868755e6375f71c764c465503064879e05a8e0c703223cf15325b2e95ad24e2400f25c7869ab5

[Log] Patching iBSS...

main: Starting...

main: iBoot-1219 inputted.

patch_rsa_check: Entering...

find_bl_verify_shsh_5_6_7: Entering...

find_bl_verify_shsh_5_6_7: Found MOVW instruction at 0x5baa

find_bl_verify_shsh_5_6_7: Found BL verify_shsh at 0x613c

find_bl_verify_shsh_5_6_7: Leaving...

patch_rsa_check: Patching BL verify_shsh at 0x613c...

patch_rsa_check: Leaving...

main: Writing out patched file to pwnediBSS...

main: Quitting...

/home/runner/work/daibutsuCFW/daibutsuCFW/src/xpwn/ipsw-patch/img3.c:createAbstractFileFromImg3:643: dc219cae3a0760e26d1868755e6375f71c764c465503064879e05a8e0c703223cf15325b2e95ad24e2400f25c7869ab5

[Log] Pwned iBSS saved at: saved/iPad1,1/pwnediBSS

[Log] Pwned iBSS img3 saved at: saved/iPad1,1/pwnediBSS.dfu

[Log] Sending iBSS...

[==================================================] 100.0%

[Log] Sending iBEC...

[==================================================] 100.0%

[Log] Finding device in Recovery mode...

[Log] Found device in Recovery mode.

[Log] Running idevicerestore with command: ../bin/linux/x86_64/idevicerestore -ew "../iPad1,1_3.2.2_7B500_CustomA-3723569450415.ipsw"

Found device in Recovery mode

INFO: device serial number is V5039JSTZ38

Found ECID 3723569450415

Identified device as k48ap, iPad1,1

Extracting BuildManifest from IPSW

Product Version: 3.2.2

Product Build: 7B500 Major: 7

Device supports Image4: false

Variant: Customer Erase Install (IPSW)

This restore will erase your device data.

checking for local shsh

Using cached SHSH

Using cached filesystem from '../iPad1,1_3.2.2_7B500_CustomA-3723569450415/018-8370-001.dmg'

Extracting iBEC.k48ap.RELEASE.dfu...

Personalizing IMG3 component iBEC...

reconstructed size: 108769

Sending iBEC (108769 bytes)...

Recovery Mode Environment:

iBoot build-version=iBoot-817.29

iBoot build-style=RELEASE

radio-error=0x10

radio-error-string=Not present

ramdisk-size=Not present

Extracting 018-8375-001.dmg...

Personalizing IMG3 component RestoreRamDisk...

reconstructed size: 30002217

Sending RestoreRamDisk (30002217 bytes)...

Extracting RestoreDeviceTree...

Personalizing IMG3 component RestoreDeviceTree...

reconstructed size: 59605

Sending RestoreDeviceTree (59605 bytes)...

Extracting RestoreKernelCache...

Personalizing IMG3 component RestoreKernelCache...

reconstructed size: 4913577

Sending RestoreKernelCache (4913577 bytes)...

About to restore device...

Waiting for device...

Device 06d1bcaf5fba0b31a67e77d198056202409777ef is now connected in restore mode...

Connecting now...

Connected to com.apple.mobile.restored, version 12

Device 06d1bcaf5fba0b31a67e77d198056202409777ef has successfully entered restore mode

Hardware Information:

BoardID: 2

ChipID: 35120

UniqueChipID: 3723569450415

ProductionMode: true

Waiting for NAND (28)

Creating partition map (11)

Creating filesystem (12)

About to send filesystem...

Connected to ASR

Validating the filesystem

Filesystem validated

Sending filesystem now...

[==================================================] 100.0%

Done sending filesystem

Got status message

Status: Fail

Log is available:

found suitable IOMobileFramebuffer: AppleCLCD

ling

[000000.000470]: AppleSamsungDPTXController::disableInterrupts: _outstandingIO=0 _pendingDisable=0

AppleNANDFTL started with IOFlashStorageDevice provider

AppleNANDFTL located at physical nand block offset 1

metadata-whitening was found and it's set to 1

default-ftl-version was found and it's set to 1

[FTL:MSG] Apple NAND Driver (AND) RW

[FTL:MSG] FIL_Init [OK]

[FTL:MSG] BUF_Init [OK]

[FTL:MSG] FPart Init [OK]

AppleMultitouchZ2SPI: successfully started

AppleMultitouchZ2SPI: using DMA for bootloading

AppleMultitouchZ2SPI: Logging is ENABLED

AppleD1815PMUPowerSource: AppleUSBCableDetect 1

AppleD1815PMUPowerSource: AppleUSBCableType USBHost

AppleEmbeddedUSBArbitrator::_usbCableTypeNotificationGated : cableType: USBHost

AppleEmbeddedUSBArbitrator::_handleUSBCableTypeChange : Connected to a USB Host

AppleEmbeddedUSBNub::withProvider : allocated new nub 0xc3359280

AppleEmbeddedUSBNub::initWithProvider : finished nub init

AppleEmbeddedUSBArbitrator::_publishNubs : nub published

AppleSynopsysOTGDevice::init : Logging Buffer Length = 4K

AppleEmbeddedUSBArbitrator::enableDeviceClock : enable: 1, index: 0

AppleS5L8930XUSBPhy::powerUp : with_hsic: 0

AppleS5L8930XUSBPhy::powerDown :

AppleEmbeddedUSBArbitrator::enableDeviceClock : enable: 0, index: 0

AppleSynopsysOTGDevice::findMaxEndpoints: in EPs: 4, out EPs: 4, max_endpoint: 6, num_endpoints: 10

AppleSynopsysOTGDevice::handleUSBCableConnect cable connected, but don't have device configuration yet

AppleSynopsysOTGDevice::start : start finished

AppleMultitouchZ2SPI: detected HBPP. driver will be kept alive

AppleM2ScalerCSCDriver: Added framebuffer device: AppleRGBOUT id: e0764000

display-scale = 1

display-rotation = 270

unable to find baseband service

unable to get device IMEI

read new style signature 0x43313131 (line:405)

[FTL:MSG] VSVFL Register [OK]

[WMR:MSG] Metadata whitening is set in NAND signature

[FTL:MSG] VFL Init [OK]

IOSDIOController::enumerateSlot(): Searching for SDIO device in slot: 0

IOSDIOController::enumerateSlot(): Found SDIO I/O device. Function count(1), memory(0)

[FTL:MSG] VFL_Open [OK]

[FTL:MSG] YAFTL Register [OK]

imei is NULL

close(caller = 0x4213): remote port = 49152

unrecognized request 'GetValue'

IOSDIOIoCardDevice::parseFn0CIS(): Device manufacturer ID 0x2d0, Product ID 0x4329

IOSDIOIoCardDevice::parseFn0CIS(): Manufacturer: ""

IOSDIOIoCardDevice::parseFn0CIS(): Product: ""

IOSDIOIoCardDevice::parseFn0CIS(): ProductInfo0: "s=B1"

IOSDIOIoCardDevice::parseFn0CIS(): ProductInfo1: "P=K48 m=u80"

AppleBCMWLAN::init(): AppleBCMWLAN-2.60 Aug 4 2010 19:13:10

AppleBCMWLAN::init(): Starting with debug level: 4, debug flags: 00000000

AppleBCMWLAN::init(): AppleBCMWLAN-2.60 Aug 4 2010 19:13:10

AppleBCMWLAN::init(): Starting with debug level: 4, debug flags: 00000000

AppleBCMWLAN::handleBluetoothRegistrationGated(): Wrote bluetooth Mac Addr c8:bc:c8:2c:8f:99

AppleSynopsysOTGDevice - Configuration: PTP

AppleSynopsysOTGDevice Interface: PTP

AppleSynopsysOTGDevice - Configuration: iPod USB Interface

AppleSynopsysOTGDevice Interface: USBAudioControl

AppleSynopsysOTGDevice Interface: USBAudioStreaming

AppleSynopsysOTGDevice Interface: IapOverUsbHid

AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device

AppleSynopsysOTGDevice Interface: PTP

AppleSynopsysOTGDevice Interface: AppleUSBMux

AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device + Apple USB Ethernet

AppleSynopsysOTGDevice Interface: PTP

AppleSynopsysOTGDevice Interface: AppleUSBMux

AppleSynopsysOTGDevice Interface: AppleUSBEthernet

AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioControl

AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioStreaming

IOAccessoryPortUSB::start

AppleSynopsysOTGDevice::gated_registerFunction Register function IapOverUsbHid

virtual bool AppleUSBDeviceMux::start(IOService*) build: Aug 4 2010 19:12:59

init_waste

AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBMux

AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBEthernet

AppleUSBEthernetDevice::start: Device MAC address = 0a:0b:ad:0b:ab:e0

AppleUSBEthernetDevice::start: Host MAC address = c8:bc:c8:2c:8f:98

AppleSynopsysOTGDevice::gated_registerFunction Register function PTP

AppleSynopsysOTGDevice::gated_registerFunction all functions registered- we are ready to start usb stack

AppleEmbeddedUSBArbitrator::enableDeviceClock : enable: 1, index: 0

AppleS5L8930XUSBPhy::powerUp : with_hsic: 0

yaFTL::YAFTL_Open(l:2707): CXT is not valid . Performing full NAND r/O restore ...

AppleS5L8930XUSBPhy::enableDeviceMode : enable: 1

AppleSynopsysOTGDevice::handleUSBReset

virtual IOReturn AppleUSBDeviceMux::setProperties(OSObject*) setting debug level to 7

AppleSynopsysOTGDevice::handleUSBReset

AppleUSBDeviceMux::handleConnectResult new session 0xc4676800 established 62078<-lo0->49152 62078<-usb->1

charger0: limiting USB input current to 100 mA

AppleUSBDeviceMux::handleConnectResult new session 0xc4676980 established 62078<-lo0->49153 62078<-usb->2

void AppleUSBDeviceMux::handleMuxTCPInput(__mbuf*) received reset, closing 0xc4676800

AppleSynopsysOTGDevice::stallBadSetupRequest request: 41 04 0000 0002 0000

AppleUSBEthernetDevice::message: kIOUSBDeviceInterfaceMessageTypeSetAlternateSetting, new alt-setting 1

client protocol version 12

Restore options:

SystemPartitionSize            => <CFNumber 0x9054f0 \[0xd2d98\]>{value = +1031, type = kCFNumberSInt64Type}

UpdateBaseband                 => <CFBoolean 0xd3734 \[0xd2d98\]>{value = false}

CreateFilesystemPartitions     => <CFBoolean 0xd372c \[0xd2d98\]>{value = true}

MinimumSystemPartition         => <CFNumber 0x9053d0 \[0xd2d98\]>{value = +1031, type = kCFNumberSInt64Type}

entering partition_nand_device

device is not a boot-from-NAND device

entering wait_for_storage_device

nand status = recover

AppleUSBDeviceMux::handleConnectResult new session 0xc4676e80 established 62078<-lo0->49154 62078<-usb->3

nand status = recover

[FTL:MSG] FTL_Open [OK]

unrecognized request 'GetValue'

AppleUSBDeviceMux::handleConnectResult new session 0xc4676780 established 62078<-lo0->49155 62078<-usb->4

entering check_for_restore_log

could not find partition, unable to check for restore log

entering create_filesystem_partitions

creating encrypted data partition

wipe entire partition: 1 (old = 0 new = 1031)

creating 1048576 byte wipe buffer

erasing 1081081856 bytes from /dev/disk0s1

unrecognized request 'ValidatePair'

1081081856 bytes written in 52 seconds (20302 KiB/s)

block size for /dev/disk0s1: 4096

/sbin/newfs_hfs -s -v System /dev/disk0s1

executing /sbin/newfs_hfs

AppleBCMWLAN::handleIOKitBusyWatchdogTimeout(): Error, no successful firmware download after 60000 ms!! Giving up...

Initialized /dev/rdisk0s1 as a 1 GB HFS Plus volume

creating 1048576 byte wipe buffer

block size for /dev/disk0s2s1: 4096

/sbin/newfs_hfs -s -v Data -J /dev/disk0s2s1

executing /sbin/newfs_hfs

Initialized /dev/rdisk0s2s1 as a 14 GB HFS Plus volume with a 8192k journal

entering restore_images

executing /usr/sbin/asr

ASR STATUS: start 112 multicast-client

ASR: Waiting for connection attempt from server

void AppleUSBDeviceMux::handleConnectResult(BulkUSBMuxSession*, errno_t) new session to port 12345 failed: 61

recv(9, 4) failed: connection closed

unable to read message size: -1

could not receive message

close(caller = 0x4213): remote port = 49155

void AppleUSBDeviceMux::handleMuxTCPInput(__mbuf*) received reset, closing 0xc4676780

ASR STATUS: setup

ASR: Validating target...

ASR: done

ASR STATUS: metadata

ASR: Validating source...

AppleUSBDeviceMux::handleConnectResult new session 0xc4676800 established 12345<-lo0->49157 12345<-usb->6

ASR: done

ASR: Warning: the target volume may not be bootable

ASR: Erasing target device /dev/disk0s1...

ASR: done

ASR: Retrieving scan information...done

ASR: Validating sizes...

ASR: done

ASR STATUS: restore

unrecognized request 'GetValue'

AppleUSBDeviceMux::handleConnectResult new session 0xc4676780 established 62078<-lo0->49158 62078<-usb->7

ASR RESTORE PROGRESS: 2%

ASR RESTORE PROGRESS: 4%

ASR RESTORE PROGRESS: 6%

ASR RESTORE PROGRESS: 8%

ASR RESTORE PROGRESS: 10%

ASR RESTORE PROGRESS: 12%

ASR RESTORE PROGRESS: 14%

ASR RESTORE PROGRESS: 16%

ASR RESTORE PROGRESS: 18%

ASR RESTORE PROGRESS: 20%

ASR RESTORE PROGRESS: 22%

ASR RESTORE PROGRESS: 24%

ASR RESTORE PROGRESS: 26%

ASR RESTORE PROGRESS: 28%

ASR RESTORE PROGRESS: 30%

ASR RESTORE PROGRESS: 32%

ASR RESTORE PROGRESS: 34%

ASR RESTORE PROGRESS: 36%

ASR RESTORE PROGRESS: 38%

ASR RESTORE PROGRESS: 40%

ASR RESTORE PROGRESS: 42%

ASR RESTORE PROGRESS: 44%

ASR RESTORE PROGRESS: 46%

ASR RESTORE PROGRESS: 48%

ASR RESTORE PROGRESS: 50%

ASR RESTORE PROGRESS: 52%

ASR RESTORE PROGRESS: 54%

ASR RESTORE PROGRESS: 56%

ASR RESTORE PROGRESS: 58%

unrecognized request 'ValidatePair'

ASR RESTORE PROGRESS: 60%

ASR RESTORE PROGRESS: 62%

ASR RESTORE PROGRESS: 64%

ASR RESTORE PROGRESS: 66%

ASR RESTORE PROGRESS: 68%

ASR RESTORE PROGRESS: 70%

ASR RESTORE PROGRESS: 72%

ASR RESTORE PROGRESS: 74%

ASR RESTORE PROGRESS: 76%

ASR RESTORE PROGRESS: 78%

ASR RESTORE PROGRESS: 80%

ASR RESTORE PROGRESS: 82%

ASR RESTORE PROGRESS: 84%

ASR RESTORE PROGRESS: 86%

ASR RESTORE PROGRESS: 88%

ASR RESTORE PROGRESS: 90%

ASR RESTORE PROGRESS: 92%

ASR RESTORE PROGRESS: 94%

ASR RESTORE PROGRESS: 96%

ASR RESTORE PROGRESS: 98%

ASR: Device write failed at byte offset 0x419F5C00 with error 22

ASR STATUS: fail

ASR: Could not restore - Invalid argument

ASR STATUS: fail

ERROR: Unable to successfully restore device

ERROR: Unable to restore device

iPad 1 failed to restore to iOS 3.2.2. Please help me!

Well i am trying to install a fresh iOS 3.2.2 install here on my iPad 1. However it will always fail. I am still be able to restore this morning and suddeltly it won't let me restore to it anymore. Restore to iOS 5.1.1 works just fine, there is no hardware damage in my iPad. Here is the log: