diff --git a/demos/.gitignore b/demos/.gitignore
new file mode 100644
index 0000000..998fca3
--- /dev/null
+++ b/demos/.gitignore
@@ -0,0 +1,2 @@
+ili9341.py
+uFT6336U.py
\ No newline at end of file
diff --git a/demos/README.md b/demos/README.md
new file mode 100644
index 0000000..c16408d
--- /dev/null
+++ b/demos/README.md
@@ -0,0 +1,78 @@
+# Raspberry Pi Pico + LCD
+
+MicroPython setup, wiring, drivers, and test scripts
+
+## 1. Install MicroPython on Raspberry Pi Pico
+
+1. Download the MicroPython UF2 for Pico:  
+   [https://micropython.org/download/rp2-pico](https://micropython.org/download/rp2-pico)
+2. Hold **BOOTSEL** while plugging in the Pico.
+3. Drag the `.uf2` file onto the Pico drive.
+4. Pico reboots into MicroPython.
+
+---
+
+## 2. Using Raspberry Pi Pico in Visual Studio Code (MicroPython)
+
+### Steps
+
+1. Connect Pico via USB
+2. Open Visual Studio Code
+3. Press **Ctrl + Shift + P**
+4. Select **Pico: Configure Project**
+5. Choose the correct COM port
+6. Open REPL
+7. Upload your `.py` files to the Pico
+8. Run scripts directly from Visual Studio Code or REPL
+
+---
+
+## 3. Wiring (Pico → LCD + Touch)
+
+### Pin Mapping Table
+
+| **Pico Pin** | **Pico Physical Pin** | **LCD Pin** | **Signal**                |
+| ------------ | --------------------- | ----------- | ------------------------- |
+| GP5          | 5                     | 5           | LCD_RS                    |
+| GP6          | 6                     | 12          | SDA (Touch)               |
+| GP7          | 7                     | 10          | SCL (Touch)               |
+| GP12         | 12                    | 4           | LCD_RST                   |
+| GP14         | 14                    | 7           | SCK (SPI)                 |
+| GP15         | 15                    | 6           | MOSI (SPI)                |
+| GP16         | 16                    | 9           | MISO (SPI)                |
+| GND          | 18                    | 2           | GND                       |
+| GP20         | 20                    | 3           | LCD_CS                    |
+| GP31         | 31                    | 13          | CTS_INT (Touch Interrupt) |
+| 3.3V         | 36                    | 11          | +3.3V                     |
+| 5V           | 39                    | 1           | +5V                       |
+
+---
+
+## 4. Drivers
+
+### ILI9341 Display Driver
+
+Save as: **`ili9341.py`**
+
+**Source link:**  
+ [https://github.com/rdagger/micropython-ili9341](https://github.com/rdagger/micropython-ili9341)
+
+---
+
+### FT6336U Touch Driver
+
+Save as: **`uFT6336U.py`**
+
+**Source link:**  
+ [https://github.com/fantasticdonkey/uFT6336U](https://github.com/fantasticdonkey/uFT6336U)
+
+---
+
+## 5. Test Code
+
+1. Run **`demo_setup.bat`** from the `demos` folder to download the driver files.
+2. Connect the Pico to Visual Studio Code and upload **`ili9341.py`** and **`uFT6336U.py`** to the Pico.
+3. To test the LCD, open **`shapes_demo.py`**, upload it to the Pico, and run the current file. The display should show colored lines, rectangles, polygons, circles, and ellipses.
+4. To test the touchscreen, open **`touch_demo.py`**, upload it to the Pico, and run the current file. Touch coordinates should appear in the Visual Studio Code REPL.
+
+---
diff --git a/demos/demo_setup.bat b/demos/demo_setup.bat
new file mode 100644
index 0000000..ef569a6
--- /dev/null
+++ b/demos/demo_setup.bat
@@ -0,0 +1,3 @@
+# This batch file downloads the ili9341.py and uFT6336U.py files from their respective GitHub repositories and saves them in the current directory.
+curl -L -o ili9341.py https://raw.githubusercontent.com/rdagger/micropython-ili9341/refs/heads/master/ili9341.py
+curl -L -o uFT6336U.py https://raw.githubusercontent.com/fantasticdonkey/uFT6336U/refs/heads/master/uFT6336U.py
diff --git a/demos/shapes_demo.py b/demos/shapes_demo.py
new file mode 100644
index 0000000..fbb5e0b
--- /dev/null
+++ b/demos/shapes_demo.py
@@ -0,0 +1,85 @@
+"""ILI9341 demo (shapes)."""
+
+from time import sleep
+
+import uFT6336U
+from ili9341 import Display, color565
+from machine import I2C, SPI, Pin  # type: ignore
+
+
+def test():
+    """Test code."""
+    # Baud rate of 40000000 seems about the max
+    spi = SPI(1, baudrate=40000000, sck=Pin(10), mosi=Pin(11), miso=Pin(12))
+    display = Display(spi, dc=Pin(3), cs=Pin(15), rst=Pin(9))
+
+    i2c_bus = I2C(sda=Pin(4), scl=Pin(5), freq=400000)
+    touch = uFT6336U.FT6336U(i2c_bus)
+
+    touch.get_positions()
+
+    display.clear(color565(64, 0, 255))
+    sleep(1)
+
+    display.clear()
+
+    display.draw_hline(10, 319, 229, color565(255, 0, 255))
+    sleep(1)
+
+    display.draw_vline(10, 0, 319, color565(0, 255, 255))
+    sleep(1)
+
+    display.fill_hrect(23, 50, 30, 75, color565(255, 255, 255))
+    sleep(1)
+
+    display.draw_hline(0, 0, 222, color565(255, 0, 0))
+    sleep(1)
+
+    display.draw_line(127, 0, 64, 127, color565(255, 255, 0))
+    sleep(2)
+
+    display.clear()
+
+    coords = [[0, 63], [78, 80], [122, 92], [50, 50], [78, 15], [0, 63]]
+    display.draw_lines(coords, color565(0, 255, 255))
+    sleep(1)
+
+    display.clear()
+    display.fill_polygon(7, 120, 120, 100, color565(0, 255, 0))
+    sleep(1)
+
+    display.fill_rectangle(0, 0, 15, 227, color565(255, 0, 0))
+    sleep(1)
+
+    display.clear()
+
+    display.fill_rectangle(0, 0, 163, 163, color565(128, 128, 255))
+    sleep(1)
+
+    display.draw_rectangle(0, 64, 163, 163, color565(255, 0, 255))
+    sleep(1)
+
+    display.fill_rectangle(64, 0, 163, 163, color565(128, 0, 255))
+    sleep(1)
+
+    display.draw_polygon(3, 120, 286, 30, color565(0, 64, 255), rotate=15)
+    sleep(3)
+
+    display.clear()
+
+    display.fill_circle(132, 132, 70, color565(0, 255, 0))
+    sleep(1)
+
+    display.draw_circle(132, 96, 70, color565(0, 0, 255))
+    sleep(1)
+
+    display.fill_ellipse(96, 96, 30, 16, color565(255, 0, 0))
+    sleep(1)
+
+    display.draw_ellipse(96, 256, 16, 30, color565(255, 255, 0))
+
+    sleep(5)
+    display.cleanup()
+
+
+test()
diff --git a/demos/touch_demo.py b/demos/touch_demo.py
new file mode 100644
index 0000000..f78ad4a
--- /dev/null
+++ b/demos/touch_demo.py
@@ -0,0 +1,23 @@
+"""uFT6336U demo (touch)."""
+
+import time
+
+import uFT6336U
+from machine import I2C, Pin
+
+i2c = I2C(0, scl=Pin(5), sda=Pin(4))
+
+t = uFT6336U.FT6336U(i2c)
+
+print("Touch test (polling)")
+print("Touch the screen to see coordinates printed in REPL")
+
+while True:
+    np = t.get_points()
+    if np > 0:
+        print(t.get_p1_x(), t.get_p1_y(), end=" ")
+    if np > 1:
+        print(t.get_p2_x(), t.get_p2_y(), end=" ")
+    if np > 0:
+        print()
+    time.sleep(0.1)
diff --git a/format.bat b/format.bat
index b47aff9..cdfd5e9 100644
--- a/format.bat
+++ b/format.bat
@@ -1,4 +1,4 @@
-@echo off 
+@echo off
 
 if not exist ".venv" (
     echo Creating virtual environment...