diff --git a/.checkpackageignore b/.checkpackageignore index 11c8a237635..5fff512d93c 100644 --- a/.checkpackageignore +++ b/.checkpackageignore @@ -1,16 +1,10 @@ board/amarula/vyasa/post-build.sh Shellcheck -board/andes/ae350/patches/uboot/0001-mmc-ftsdc010_mci-Support-DTS-of-ftsdc010-driver-for-.patch lib_patch.Upstream -board/andes/ae350/patches/uboot/0002-spl-Align-device-tree-blob-address-at-8-byte-boundar.patch lib_patch.Upstream -board/andes/ae350/post-build.sh Shellcheck board/arcturus/aarch64-ucls1012a/post-build.sh Shellcheck board/arcturus/aarch64-ucls1012a/post-image.sh Shellcheck board/aspeed/common/post-image.sh Shellcheck board/asus/tinker/post-build.sh Shellcheck board/atmel/flasher.sh Shellcheck board/beagleboard/beaglebone-qt5/patches/linux/0001-keep-jtag-clock-alive-for-debugger.patch lib_patch.Upstream -board/beagleboard/beaglebone/post-build.sh Shellcheck -board/beagleboard/beagleboneai/patches/uboot/0001-am57xx_evm-fixes.patch lib_patch.Upstream -board/beagleboard/beagleboneai/post-build.sh Shellcheck board/boundarydevices/common/post-build.sh Shellcheck board/boundarydevices/common/post-image.sh Shellcheck board/broadcom/northstar/post-image.sh Shellcheck @@ -38,9 +32,6 @@ board/octavo/osd32mp1-brk/patches/uboot/0001-Add-OSD32MP1-BRK-device-tree-suppor board/octavo/osd32mp1-brk/patches/uboot/0002-Add-OSD32MP1-BRK-build-config.patch lib_patch.NumberedSubject lib_patch.Upstream board/octavo/osd32mp1-red/patches/uboot/0001-Add-OSD32MP1-RED-Device-Tree-support.patch lib_patch.NumberedSubject lib_patch.Upstream board/octavo/osd32mp1-red/patches/uboot/0002-configs-stm32mp15_trusted_defconfig-disable-environm.patch lib_patch.NumberedSubject lib_patch.Upstream -board/olimex/a13_olinuxino/post-build.sh Shellcheck -board/olimex/a20_olinuxino/post-build.sh Shellcheck -board/olimex/a33_olinuxino/post-build.sh Shellcheck board/olpc/post-build.sh Shellcheck board/orangepi/common/post-build.sh Shellcheck board/orangepi/orangepi-zero/patches/linux/0001-ARM-dts-orange-pi-zero-interrupt-triggering-xr819.patch lib_patch.Upstream @@ -48,12 +39,8 @@ board/orangepi/orangepi-zero/patches/linux/0002-ARM-dts-orange-pi-zero-enable-sp board/orangepi/orangepi-zero/patches/linux/0003-ARM-dts-orange-pi-zero-enable-spidev.patch lib_patch.Upstream board/orangepi/orangepi-zero/patches/linux/0004-ARM-dts-orange-pi-zero-enable-uart.patch lib_patch.Upstream board/qemu/aarch64-sbsa/assemble-flash-images Shellcheck -board/qemu/x86/post-build.sh Shellcheck -board/qemu/x86_64/post-build.sh Shellcheck board/raspberrypi/post-build.sh Shellcheck board/raspberrypi/post-image.sh Shellcheck -board/roseapplepi/patches/uboot/0001-compiler-.h-sync-include-linux-compiler-.h-with-Linu.patch lib_patch.Upstream -board/roseapplepi/post-build.sh Shellcheck board/seeed/stm32mp157c-odyssey/patches/linux/0001-ARM-dts-stm32-fix-stm32mp157c-odyssey-card-detect.patch lib_patch.Upstream board/sheevaplug/patches/uboot/0001-Remove-redundant-YYLOC-global-declaration.patch lib_patch.Upstream board/solidrun/clearfog/post-build.sh Shellcheck @@ -65,7 +52,6 @@ board/stmicroelectronics/stm32f429-disco/flash.sh Shellcheck board/stmicroelectronics/stm32f469-disco/flash_sd.sh Shellcheck board/stmicroelectronics/stm32f469-disco/flash_xip.sh Shellcheck board/synopsys/axs10x/post-build.sh Shellcheck -board/technologic/ts4900/post-image.sh Shellcheck board/udoo/common/post-build.sh Shellcheck boot/afboot-stm32/0003-Makefile-disable-stack-protector.patch lib_patch.Upstream boot/optee-os/3.13.0/0001-core-zlib-fix-build-warning-when-_LFS64_LARGEFILE-is.patch lib_patch.Upstream @@ -83,15 +69,8 @@ boot/syslinux/0013-Fix-build-with-gnu-efi-version-3.0.9.patch lib_patch.Upstream boot/syslinux/0014-Fix-build-with-binutils-note-gnu-property-section.patch lib_patch.Upstream boot/syslinux/0016-Workaround-multiple-definition-of-symbol-errors.patch lib_patch.Upstream boot/syslinux/0017-Replace-builtin-strlen-that-appears-to-get-optimized.patch lib_patch.Upstream -configs/am574x_idk_defconfig lib_defconfig.ForceCheckHash -configs/andes_ae350_45_defconfig lib_defconfig.ForceCheckHash configs/arcturus_ucls1012a_defconfig lib_defconfig.ForceCheckHash -configs/arcturus_ucp1020_defconfig lib_defconfig.ForceCheckHash -configs/aspeed_ast2500evb_defconfig lib_defconfig.ForceCheckHash -configs/aspeed_ast2600evb_defconfig lib_defconfig.ForceCheckHash configs/asus_tinker-s_rk3288_defconfig lib_defconfig.ForceCheckHash -configs/asus_tinker_rk3288_defconfig lib_defconfig.ForceCheckHash -configs/at91sam9260eknf_defconfig lib_defconfig.ForceCheckHash configs/atmel_sama5d27_som1_ek_mmc_dev_defconfig lib_defconfig.ForceCheckHash configs/atmel_sama5d2_xplained_mmc_defconfig lib_defconfig.ForceCheckHash configs/atmel_sama5d2_xplained_mmc_dev_defconfig lib_defconfig.ForceCheckHash @@ -99,28 +78,19 @@ configs/atmel_sama5d3_xplained_defconfig lib_defconfig.ForceCheckHash configs/atmel_sama5d3_xplained_dev_defconfig lib_defconfig.ForceCheckHash configs/atmel_sama5d3_xplained_mmc_defconfig lib_defconfig.ForceCheckHash configs/atmel_sama5d3_xplained_mmc_dev_defconfig lib_defconfig.ForceCheckHash -configs/atmel_sama5d3xek_defconfig lib_defconfig.ForceCheckHash configs/atmel_sama5d4_xplained_defconfig lib_defconfig.ForceCheckHash configs/atmel_sama5d4_xplained_dev_defconfig lib_defconfig.ForceCheckHash configs/atmel_sama5d4_xplained_mmc_defconfig lib_defconfig.ForceCheckHash configs/atmel_sama5d4_xplained_mmc_dev_defconfig lib_defconfig.ForceCheckHash configs/avenger96_defconfig lib_defconfig.ForceCheckHash configs/avnet_rzboard_v2l_defconfig lib_defconfig.ForceCheckHash -configs/bananapi_m2_berry_defconfig lib_defconfig.ForceCheckHash -configs/bananapi_m2_ultra_defconfig lib_defconfig.ForceCheckHash configs/bananapi_m2_zero_defconfig lib_defconfig.ForceCheckHash configs/broadcom_northstar_defconfig lib_defconfig.ForceCheckHash configs/canaan_kd233_defconfig lib_defconfig.ForceCheckHash configs/ci20_defconfig lib_defconfig.ForceCheckHash -configs/engicam_imx6qdl_icore_defconfig lib_defconfig.ForceCheckHash -configs/engicam_imx6qdl_icore_qt5_defconfig lib_defconfig.ForceCheckHash -configs/engicam_imx6qdl_icore_rqs_defconfig lib_defconfig.ForceCheckHash -configs/engicam_imx6ul_geam_defconfig lib_defconfig.ForceCheckHash -configs/engicam_imx6ul_isiot_defconfig lib_defconfig.ForceCheckHash configs/freescale_p1025twr_defconfig lib_defconfig.ForceCheckHash configs/freescale_t1040d4rdb_defconfig lib_defconfig.ForceCheckHash configs/freescale_t2080_qds_rdb_defconfig lib_defconfig.ForceCheckHash -configs/friendlyarm_nanopi_r2s_defconfig lib_defconfig.ForceCheckHash configs/globalscale_espressobin_defconfig lib_defconfig.ForceCheckHash configs/imx23evk_defconfig lib_defconfig.ForceCheckHash configs/imx6-sabreauto_defconfig lib_defconfig.ForceCheckHash @@ -129,15 +99,10 @@ configs/imx6-sabresd_qt5_defconfig lib_defconfig.ForceCheckHash configs/imx6slevk_defconfig lib_defconfig.ForceCheckHash configs/imx6sx-sdb_defconfig lib_defconfig.ForceCheckHash configs/imx6ulevk_defconfig lib_defconfig.ForceCheckHash -configs/imx6ullevk_defconfig lib_defconfig.ForceCheckHash configs/imx6ulpico_defconfig lib_defconfig.ForceCheckHash configs/imx7dpico_defconfig lib_defconfig.ForceCheckHash configs/imx8mqevk_defconfig lib_defconfig.ForceCheckHash -configs/imxrt1050-evk_defconfig lib_defconfig.ForceCheckHash -configs/khadas_vim3_defconfig lib_defconfig.ForceCheckHash configs/kontron_bl_imx8mm_defconfig lib_defconfig.ForceCheckHash -configs/kontron_smarc_sal28_defconfig lib_defconfig.ForceCheckHash -configs/mangopi_mq1rdw2_defconfig lib_defconfig.ForceCheckHash configs/mender_x86_64_efi_defconfig lib_defconfig.ForceCheckHash configs/microchip_sam9x60ek_mmc_defconfig lib_defconfig.ForceCheckHash configs/microchip_sam9x60ek_mmc_dev_defconfig lib_defconfig.ForceCheckHash @@ -159,26 +124,13 @@ configs/nitrogen8mm_defconfig lib_defconfig.ForceCheckHash configs/nitrogen8mn_defconfig lib_defconfig.ForceCheckHash configs/nitrogen8mp_defconfig lib_defconfig.ForceCheckHash configs/odroidc2_defconfig lib_defconfig.ForceCheckHash -configs/olimex_a10_olinuxino_lime_defconfig lib_defconfig.ForceCheckHash -configs/olimex_a13_olinuxino_defconfig lib_defconfig.ForceCheckHash -configs/olimex_a20_olinuxino_micro_defconfig lib_defconfig.ForceCheckHash -configs/olimex_a33_olinuxino_defconfig lib_defconfig.ForceCheckHash -configs/olimex_a64_olinuxino_defconfig lib_defconfig.ForceCheckHash configs/olpc_xo175_defconfig lib_defconfig.ForceCheckHash configs/olpc_xo1_defconfig lib_defconfig.ForceCheckHash configs/orangepi_pc2_defconfig lib_defconfig.ForceCheckHash configs/orangepi_zero_plus_defconfig lib_defconfig.ForceCheckHash -configs/pc_x86_64_bios_defconfig lib_defconfig.ForceCheckHash -configs/pc_x86_64_efi_defconfig lib_defconfig.ForceCheckHash -configs/pine64_defconfig lib_defconfig.ForceCheckHash -configs/pine64_pinecube_defconfig lib_defconfig.ForceCheckHash -configs/pine64_star64_defconfig lib_defconfig.ForceCheckHash -configs/roseapplepi_defconfig lib_defconfig.ForceCheckHash -configs/s6lx9_microboard_defconfig lib_defconfig.ForceCheckHash configs/sipeed_lichee_rv_defconfig lib_defconfig.ForceCheckHash configs/sipeed_lichee_rv_dock_defconfig lib_defconfig.ForceCheckHash configs/sipeed_licheepi_nano_defconfig lib_defconfig.ForceCheckHash -configs/sipeed_licheepi_zero_defconfig lib_defconfig.ForceCheckHash configs/sipeed_maix_bit_defconfig lib_defconfig.ForceCheckHash configs/sipeed_maix_bit_sdcard_defconfig lib_defconfig.ForceCheckHash configs/sipeed_maix_dock_defconfig lib_defconfig.ForceCheckHash @@ -196,13 +148,10 @@ configs/solidrun_clearfog_gt_8k_defconfig lib_defconfig.ForceCheckHash configs/solidrun_macchiatobin_defconfig lib_defconfig.ForceCheckHash configs/stm32mp157c_odyssey_defconfig lib_defconfig.ForceCheckHash configs/terasic_de10nano_cyclone5_defconfig lib_defconfig.ForceCheckHash -configs/ts4900_defconfig lib_defconfig.ForceCheckHash -configs/ts5500_defconfig lib_defconfig.ForceCheckHash configs/uevm5432_defconfig lib_defconfig.ForceCheckHash configs/visionfive_defconfig lib_defconfig.ForceCheckHash configs/wandboard_defconfig lib_defconfig.ForceCheckHash configs/warp7_defconfig lib_defconfig.ForceCheckHash -linux/5.10.162-cip24-rt10/0001-arch-microblaze-mm-init.c-fix-build.patch lib_patch.Upstream package/18xx-ti-utils/0001-plt.h-fix-build-with-gcc-10.patch lib_patch.Upstream package/4th/0001-avoid-regen-during-install.patch lib_patch.Upstream package/acl/0001-Build-with-old-GCC-versions.patch lib_patch.Upstream @@ -211,11 +160,6 @@ package/alchemy/0001-toolchains-remove-hash-style-management.patch lib_patch.Ups package/alsamixergui/0001-misc-fixes.patch lib_patch.Sob lib_patch.Upstream package/alsamixergui/0002-configure-fix-detection-of-fltk-libs.patch lib_patch.Upstream package/am335x-pru-package/0001-install-does-not-build.patch lib_patch.Upstream -package/am33x-cm3/0001-fix-makefile.patch lib_patch.Upstream -package/am33x-cm3/0002-Makefile-unconditionally-disable-SSP.patch lib_patch.Upstream -package/am33x-cm3/0003-Makefile-unconditionally-disable-PIE.patch lib_patch.Upstream -package/am33x-cm3/0004-Makefile-add-fno-builtin.patch lib_patch.Upstream -package/am33x-cm3/S93-am335x-pm-firmware-load lib_sysv.Variables package/android-tools/0001-Fix-makefiles-for-out-of-tree-build.patch lib_patch.Upstream package/android-tools/0002-Fix-adbd-for-non-Ubuntu-systems.patch lib_patch.Upstream package/android-tools/0004-Fix-build-issue-with-musl.patch lib_patch.Upstream @@ -227,9 +171,6 @@ package/android-tools/0009-Fix-makefiles-for-out-of-tree-ext4_utils-build.patch package/android-tools/0010-adb-added-patch-for-openssl-1.1.0-compatibility.patch lib_patch.Upstream package/aoetools/0001-Change-shell-script-interpreter-from-bin-bash-to-bin.patch lib_patch.Upstream package/apache/0001-cross-compile.patch lib_patch.Upstream -package/apache/S50apache Shellcheck lib_sysv.Indent lib_sysv.Variables -package/apitrace/0001-thirdparty-libbacktrace-backtrace-h-include-config.h.patch lib_patch.Upstream -package/apitrace/0002-gltrace-Avoid-__libc_dlsym-and-__libc_dlopen_mode-on-GLIBC-2-34.patch lib_patch.Upstream package/apr-util/0001-remove-checkapr.patch lib_patch.Upstream package/apr/0001-sys-param-h.patch lib_patch.Upstream package/apr/0002-Revert-Backport-r1872164.-Fix-the-name-of-libtool-wh.patch lib_patch.Upstream @@ -243,25 +184,16 @@ package/asterisk/0004-install-samples-need-the-data-files.patch lib_patch.Upstre package/at/0001-Makefile.in-fix-make-install-for-non-root-don-t-stri.patch lib_patch.Upstream package/at/S99at lib_sysv.Indent lib_sysv.Variables package/attr/0001-build-with-older-GCCs.patch lib_patch.Upstream -package/aufs-util/0001-remove-user-settings.patch lib_patch.Upstream -package/aufs-util/0002-no-check-ver.patch lib_patch.Upstream -package/aufs-util/0003-no-strip-lib.patch lib_patch.Upstream package/aumix/0001-fix-incorrect-makefile-am.patch lib_patch.Upstream -package/autoconf/0001-dont-add-dirty-to-version.patch lib_patch.Upstream package/automake/0001-noman.patch lib_patch.Upstream -package/avahi/0001-Fix-NULL-pointer-crashes-from-175.patch lib_patch.Upstream package/avahi/S05avahi-setup.sh lib_sysv.Indent lib_sysv.Variables package/avahi/S50avahi-daemon lib_sysv.Indent lib_sysv.Variables package/babeld/S50babeld Shellcheck lib_sysv.Indent lib_sysv.Variables -package/babeltrace2/0001-configure-simplify-warning-flags-detection.patch lib_patch.Upstream package/bash/0001-input.h-add-missing-include-on-stdio.h.patch lib_patch.Upstream package/bash/0002-parse.y-fix-compilation-for-non-multibyte-builds.patch lib_patch.Upstream package/bc/0001-bc-use-MAKEINFO-variable-for-docs.patch lib_patch.Upstream package/bc/0002-notice-read-and-write-errors-on-input-and-output.patch lib_patch.Upstream -package/bc/0003-dc-fix-exit-code-of-q-command.patch lib_patch.Upstream -package/bc/0004-no-gen-libmath.patch lib_patch.Upstream package/bcache-tools/0001-Don-t-inline-crc64-for-gcc-5-compatability.patch lib_patch.Upstream -package/bctoolbox/0001-Fix-Libs.private-flags-for-mbedtls.patch lib_patch.Upstream package/bcusdk/0002-eibd-fix-endless-recursion-when-using-USB-backends.patch lib_patch.Upstream package/bearssl/0001-Fix-missing-objdir-dependency.patch lib_patch.Upstream package/benejson/0001-c-std.patch lib_patch.Upstream @@ -301,15 +233,11 @@ package/cdrkit/0003-Add-extern-to-char-outfile-declaration-to-fix-build-.patch l package/cfm/S65cfm lib_sysv.Indent lib_sysv.Variables package/cgroupfs-mount/S30cgroupfs Shellcheck lib_sysv.Indent lib_sysv.Variables package/chipmunk/0001-Fix-build-failure-on-musl.patch lib_patch.Upstream -package/chocolate-doom/0001-Remove-redundant-demoextend-definition.patch lib_patch.Upstream package/chrony/S49chronyd lib_sysv.Variables -package/cmake/0001-rename-cmake-rootfile.patch lib_patch.Upstream -package/cmocka/0001-Don-t-redefine-uintptr_t.patch lib_patch.Upstream package/collectd/0001-src-netlink.c-remove-REG_NOERROR.patch lib_patch.Upstream package/connman/S45connman lib_sysv.Variables package/copas/0001-Do-not-load-coxpcall-for-LuaJIT.patch lib_patch.Upstream package/coremark-pro/coremark-pro.sh.in Shellcheck -package/cppdb/0001-mysql-library-suffix.patch lib_patch.Upstream package/cpulimit/0001-Fix-crash-and-compiler-warnings.patch lib_patch.Upstream package/cpulimit/0002-Remove-sys-sysctl.h-and-add-missing-libgen.h-include.patch lib_patch.Upstream package/cpulimit/0003-Fix-an-infrequent-crash.patch lib_patch.Upstream @@ -326,7 +254,6 @@ package/curlftpfs/0001-fix-CURLOPT_INFILESIZE.patch lib_patch.Sob lib_patch.Upst package/curlftpfs/0002-free_ftpfs_file-memleak-fix.patch lib_patch.Sob lib_patch.Upstream package/curlftpfs/0003-nocache-memleak-fix.patch lib_patch.Sob lib_patch.Upstream package/curlftpfs/0004-fix-musl-build-off-t.patch lib_patch.Upstream -package/cutelyst/0001-server-CMakeLists.txt-don-t-override-CMAKE_EXE_LINKE.patch lib_patch.Upstream package/cwiid/0001-wmdemo-fix-linking-by-adding-the-missing-lbluetooth-.patch lib_patch.Upstream package/cwiid/0002-configure-make-wmgui-build-optional.patch lib_patch.Upstream package/dahdi-tools/0001-no-build-docs.patch lib_patch.Upstream @@ -334,14 +261,11 @@ package/dahdi-tools/0002-no-perl-manpages.patch lib_patch.Upstream package/dante/0001-fix-sparc-compile.patch lib_patch.Upstream package/dante/0002-osdep-m4-Remove-getaddrinfo-too-low-checks.patch lib_patch.Upstream package/dante/S50dante Shellcheck lib_sysv.Indent lib_sysv.Variables -package/daq/0001-Fix-build-against-the-musl-C-library.patch lib_patch.Upstream -package/daq/0002-parallel-grammar.patch lib_patch.Upstream package/darkhttpd/S50darkhttpd Shellcheck lib_sysv.Indent lib_sysv.Variables package/davfs2/0001-src-Makefile.am-do-not-hardcode-fstack-protector-str.patch lib_patch.Upstream package/dbus-cpp/0001-gcc4.7.patch lib_patch.Upstream package/dbus-cpp/0002-cross-compile-tools.patch lib_patch.Upstream package/dbus-cpp/0003-src-pipe.c-fix-build-error-with-gcc-7.x.patch lib_patch.Upstream -package/dbus/S30dbus Shellcheck lib_sysv.Indent lib_sysv.TrailingSpace lib_sysv.Variables package/dc3dd/0001-no_man.patch lib_patch.Upstream package/dc3dd/0002-fix-autoreconf.patch lib_patch.Upstream package/dc3dd/0003-fix-for-glibc-2.28.patch lib_patch.Upstream @@ -350,20 +274,12 @@ package/dcron/S90dcron lib_sysv.Variables package/dhcp/S80dhcp-relay Shellcheck lib_sysv.Variables package/dhcp/S80dhcp-server Shellcheck lib_sysv.Variables package/dhcp/dhclient-script Shellcheck lib_shellscript.TrailingSpace -package/dhcpcd/S41dhcpcd lib_sysv.Indent lib_sysv.Variables -package/dillo/0001-usr-local-include.patch lib_patch.Upstream -package/dillo/0002-Fix-openssl-detection.patch lib_patch.Upstream -package/dillo/0004-fix-build-with-gcc-10.patch lib_patch.Upstream package/dmalloc/0001-configure-fix-build-on-mips.patch lib_patch.Upstream package/dmalloc/0003-configure-allow-overriding-some-tests.patch lib_patch.Upstream package/dmalloc/0004-Makefile-use-the-configure-detected-or-user-supplied.patch lib_patch.Upstream package/dmalloc/0005-configure-use-LD-instead-of-hard-coding-ld.patch lib_patch.Upstream -package/dmraid/0001-fix-compilation-under-musl.patch lib_patch.Upstream -package/dmraid/S20dmraid lib_sysv.Variables package/docopt-cpp/0001-only-build-one-target-use-BUILD_SHARED_LIBS-where-appropriate.patch lib_patch.Upstream package/domoticz/S99domoticz Shellcheck -package/dovecot/0001-auth-Fix-handling-passdbs-with-identical-driver-args.patch lib_patch.Upstream -package/dracut/0001-dracut.sh-don-t-unset-LD_PRELOAD.patch lib_patch.Upstream package/dracut/merged-usr-module-setup.sh Shellcheck package/dropbear/S50dropbear Shellcheck lib_sysv.Indent lib_sysv.Variables package/dt/0001-adjust-os-symlink.patch lib_patch.Upstream @@ -371,19 +287,12 @@ package/dt/0002-dt-default-source-define.patch lib_patch.Upstream package/dtc/0001-Fix-include-guards-for-older-kernel-u-boot-sources.patch lib_patch.Upstream package/dvblast/0001-missing-lm.patch lib_patch.Upstream package/dvblast/0002-fix-int-types.patch lib_patch.Upstream -package/dvbsnoop/0001-musl-types-h.patch lib_patch.Upstream -package/dvdrw-tools/0001-limits.h.patch lib_patch.Upstream -package/dvdrw-tools/0002-Include-sysmacros.h-to-compile-with-newer-gcc.patch lib_patch.Upstream package/earlyoom/0001-main.c-fix-build-with-kernel-4.3.patch lib_patch.Upstream package/earlyoom/S02earlyoom Shellcheck lib_sysv.Indent package/ebtables/0001-replace-ebtables-save-perl-script-with-bash.patch lib_patch.Upstream package/ecryptfs-utils/0001-musl.patch lib_patch.Upstream package/ecryptfs-utils/0002-openssl110.patch lib_patch.Upstream package/ecryptfs-utils/0003-fix-parallel-build-issue.patch lib_patch.Upstream -package/efl/0001-ecore_evas-engines-drm-meson.build-use-gl_deps-as-en.patch lib_patch.Upstream -package/efl/0002-ecore_evas-engines-drm-meson.build-fix-gl_drm-includ.patch lib_patch.Upstream -package/efl/0003-ecore_fb-fix-build-with-tslib.patch lib_patch.Upstream -package/eigen/0001-Adds-new-CMake-Options-for-controlling-build-compone.patch lib_patch.Upstream package/elftosb/0001-fixes-includes.patch lib_patch.Upstream package/elftosb/0002-force-cxx-compiler.patch lib_patch.Upstream package/elfutils/0001-Add-a-enable-disable-progs-configure-option.patch lib_patch.Upstream @@ -399,8 +308,6 @@ package/exim/0001-Build-buildconfig-for-the-host.patch lib_patch.Upstream package/exim/0002-Don-t-make-backup-copies-of-installed-files.patch lib_patch.Upstream package/exim/0003-Skip-version-check-and-symlink-installation.patch lib_patch.Upstream package/exim/S86exim lib_sysv.Indent lib_sysv.Variables -package/expect/0001-enable-cross-compilation.patch lib_patch.Upstream -package/expect/0002-allow-tcl-build-directory.patch lib_patch.Upstream package/fail2ban/S60fail2ban Shellcheck lib_sysv.Variables package/fakedate/fakedate Shellcheck package/falcosecurity-libs/0001-cmake-Permit-setting-GRPC_CPP_PLUGIN.patch lib_patch.Upstream @@ -416,7 +323,6 @@ package/ffmpeg/0001-swscale-x86-yuv2rgb-Fix-build-without-SSSE3.patch lib_patch. package/ffmpeg/0002-avcodec-vaapi_h264-skip-decode-if-pic-has-no-slices.patch lib_patch.Upstream package/ffmpeg/0003-libavutil-Fix-mips-build.patch lib_patch.Upstream package/ffmpeg/0004-configure-add-extralibs-to-extralibs_xxx.patch lib_patch.Upstream -package/ficl/0001-fix-Makefile.patch lib_patch.Upstream package/flatbuffers/0001-include-flatbuffers-base.h-fix-build-on-musl.patch lib_patch.Upstream package/flex/0001-build-AC_USE_SYSTEM_EXTENSIONS-in-configure.ac.patch lib_patch.Upstream package/flex/0002-build-make-it-possible-to-disable-the-build-of-the-f.patch lib_patch.Upstream @@ -431,30 +337,18 @@ package/freescale-imx/imx-uuc/S80imx-uuc Shellcheck lib_sysv.Indent lib_sysv.Var package/freescale-imx/imx-vpu-hantro/0001-Fix-ion.h-header-inclusion-to-be-standard.patch lib_patch.Upstream package/freescale-imx/imx-vpu-hantro/0002-Fix-build-with-uclibc-toolchain.patch lib_patch.Upstream package/freescale-imx/imx-vpu-hantro/0003-Fix-Linux-kernel-version-header.patch lib_patch.Upstream -package/freeswitch/0001-libs-srtp-crypto-hash-hmac_ossl.c-fix-build-with-lib.patch lib_patch.Upstream package/frr/S50frr Shellcheck package/fstrcmp/0001-disable-rpath.patch lib_patch.Upstream package/ftop/0001-overflow.patch lib_patch.Upstream -package/fwts/0001-build-do-not-use-Werror.patch lib_patch.Upstream package/fxdiv/0001-CMake-don-t-enable-CXX-unless-building-tests-benchma.patch lib_patch.Upstream package/fxload/0001-fix-static-build.patch lib_patch.Upstream -package/gcc/13.4.0/0001-disable-split-stack-for-non-thread-builds.patch lib_patch.Upstream -package/gcc/14.3.0/0001-disable-split-stack-for-non-thread-builds.patch lib_patch.Upstream -package/gcc/15.2.0/0001-disable-split-stack-for-non-thread-builds.patch lib_patch.Upstream +package/gcc/14.4.0/0001-disable-split-stack-for-non-thread-builds.patch lib_patch.Upstream +package/gcc/15.3.0/0001-disable-split-stack-for-non-thread-builds.patch lib_patch.Upstream +package/gcc/16.2.0/0001-disable-split-stack-for-non-thread-builds.patch lib_patch.Upstream package/gcc/8.4.0/0001-xtensa-fix-PR-target-91880.patch lib_patch.Upstream package/gcc/8.4.0/0002-Revert-re-PR-target-92095-internal-error-with-O1-mcp.patch lib_patch.Upstream package/gcc/8.4.0/0003-libsanitizer-Remove-cyclades-from-libsanitizer.patch lib_patch.Upstream package/gcc/8.4.0/0004-disable-split-stack-for-non-thread-builds.patch lib_patch.Upstream -package/gcr/0001-meson-Fix-unknown-kw-argument-in-gnome.generate_gir.patch lib_patch.Upstream -package/gdb/14.2/0001-ppc-ptrace-Define-pt_regs-uapi_pt_regs-on-GLIBC-syst.patch lib_patch.Upstream -package/gdb/14.2/0002-sh-ptrace-Define-pt_-dsp-regs-uapi_pt_-dsp-regs-on-G.patch lib_patch.Upstream -package/gdb/14.2/0003-use-asm-sgidefs.h.patch lib_patch.Upstream -package/gdb/14.2/0004-gdbserver-fix-build-for-m68k.patch lib_patch.Upstream -package/gdb/14.2/0005-nat-fork-inferior-include-linux-ptrace.h.patch lib_patch.Upstream -package/gdb/14.2/0006-Fix-getrandom-compile-for-uclibc-v1.0.35.patch lib_patch.Upstream -package/gdb/14.2/0007-fix-musl-build-on-riscv.patch lib_patch.Upstream -package/gdb/14.2/0008-gdbserver-Makefile.in-fix-NLS-build.patch lib_patch.Upstream -package/gdb/14.2/0009-gdb-Fix-native-build-on-xtensa.patch lib_patch.Upstream package/gdb/15.2/0001-ppc-ptrace-Define-pt_regs-uapi_pt_regs-on-GLIBC-syst.patch lib_patch.Upstream package/gdb/15.2/0002-sh-ptrace-Define-pt_-dsp-regs-uapi_pt_-dsp-regs-on-G.patch lib_patch.Upstream package/gdb/15.2/0003-use-asm-sgidefs.h.patch lib_patch.Upstream @@ -473,13 +367,20 @@ package/gdb/16.3/0006-Fix-getrandom-compile-for-uclibc-v1.0.35.patch lib_patch.U package/gdb/16.3/0007-fix-musl-build-on-riscv.patch lib_patch.Upstream package/gdb/16.3/0008-gdbserver-Makefile.in-fix-NLS-build.patch lib_patch.Upstream package/gdb/16.3/0009-gdb-Fix-native-build-on-xtensa.patch lib_patch.Upstream +package/gdb/17.1/0001-ppc-ptrace-Define-pt_regs-uapi_pt_regs-on-GLIBC-syst.patch lib_patch.Upstream +package/gdb/17.1/0002-sh-ptrace-Define-pt_-dsp-regs-uapi_pt_-dsp-regs-on-G.patch lib_patch.Upstream +package/gdb/17.1/0003-use-asm-sgidefs.h.patch lib_patch.Upstream +package/gdb/17.1/0004-gdbserver-fix-build-for-m68k.patch lib_patch.Upstream +package/gdb/17.1/0005-nat-fork-inferior-include-linux-ptrace.h.patch lib_patch.Upstream +package/gdb/17.1/0006-Fix-getrandom-compile-for-uclibc-v1.0.35.patch lib_patch.Upstream +package/gdb/17.1/0007-fix-musl-build-on-riscv.patch lib_patch.Upstream +package/gdb/17.1/0008-gdbserver-Makefile.in-fix-NLS-build.patch lib_patch.Upstream +package/gdb/17.1/0009-gdb-Fix-native-build-on-xtensa.patch lib_patch.Upstream package/genpart/0001-fix-return-code.patch lib_patch.Upstream -package/gensio/0001-Fix-missing-EVP_PKEY_ED25519-build-error-on-libressl.patch lib_patch.Upstream package/gerbera/S99gerbera lib_sysv.Indent package/git-crypt/0001-fix-build-with-libressl-3.5.0.patch lib_patch.Upstream package/glorytun/0001-Add-support-for-Apple-silicon.patch lib_patch.Upstream package/glorytun/0002-aegis256.c-fix-aarch64-build-with-uclibc.patch lib_patch.Upstream -package/gnu-efi/0001-Make.defaults-don-t-override-ARCH-when-cross-compili.patch lib_patch.Upstream package/gnupg/0001-build-Always-use-EXTERN_UNLESS_MAIN_MODULE-pattern.patch lib_patch.Upstream package/gnuplot/0001-configure-add-without-demo-option.patch lib_patch.Upstream package/go/go-src/0001-build.go-explicit-option-for-crosscompilation.patch lib_patch.Upstream @@ -487,31 +388,19 @@ package/gob2/0001-dont-include-from-prefix.patch lib_patch.Upstream package/gobject-introspection/0001-Add-rpath-links-to-ccompiler.patch lib_patch.Upstream package/gpsd/S50gpsd Shellcheck lib_sysv.Indent lib_sysv.Variables package/gptfdisk/0001-gptcurses-partially-revert-Tweaks-for-building-on-th.patch lib_patch.Upstream -package/graphite2/0001-don-t-install-a-libtool-file-with-static-library.patch lib_patch.Upstream -package/grpc/0003-disable-unconditionally-downloading-api-repos.patch lib_patch.Upstream package/gstreamer1/gstd/0001-Don-t-require-gstd-check-user-xenv.sh-for-systemd-se.patch lib_patch.Upstream package/guile/0001-calculate-csqrt_manually.patch lib_patch.Upstream -package/guile/0002-Makefile.am-fix-build-without-makeinfo.patch lib_patch.Upstream -package/gumbo-parser/0001-configure.ac-fix-build-without-C.patch lib_patch.Upstream package/gutenprint/0001-use-pregen-xmli18n-header.patch lib_patch.Upstream package/gutenprint/0002-cups-support-replaces-static-with-static-libtool-lib.patch lib_patch.Upstream package/harfbuzz/0001-meson.build-check-for-pthread.h.patch lib_patch.Upstream package/haserl/0001-add-haserl_lualib.inc.patch lib_patch.Upstream package/haveged/S21haveged Shellcheck lib_sysv.Variables -package/heirloom-mailx/0001-fix-libressl-support.patch lib_patch.Upstream package/hplip/0001-build-use-pkg-config-to-discover-libusb.patch lib_patch.Upstream package/hplip/0002-configure.in-fix-AM_INIT_AUTOMAKE-call.patch lib_patch.Upstream -package/htpdate/S43htpdate Shellcheck package/i2pd/S99i2pd Shellcheck lib_sysv.Indent lib_sysv.Variables package/i7z/0001-fix-build-with-gcc-10.patch lib_patch.Upstream -package/ibm-sw-tpm2/0001-Use-LONG_BIT-to-define-RADIX_BITS.patch lib_patch.Upstream -package/ibrcommon/0001-ibrcommon-data-File.cpp-support-POSIX-basename-call.patch lib_patch.Upstream -package/ibrcommon/0002-ibrcommon-added-openssl-1.1-compatibility-264.patch lib_patch.Upstream -package/ibrcommon/0003-ibrcommon-ssl-gcm-fix-static-build-with-openssl.patch lib_patch.Upstream package/icu/0001-dont-build-static-dynamic-twice.patch lib_patch.Upstream -package/icu/0002-workaround-toolchain-bugs.patch lib_patch.Upstream -package/icu/0003-link-icudata-as-data-only.patch lib_patch.Upstream -package/icu/0004-fix-static-linking-with-icu-uc.patch lib_patch.Upstream +package/icu/0002-link-icudata-as-data-only.patch lib_patch.Upstream package/ifmetric/0001-Fix-issue-NETLINK-Packet-too-small-or-truncated-92-1.patch lib_patch.Upstream package/ifplugd/0001-cross.patch lib_patch.Sob lib_patch.Upstream package/ifplugd/0002-fix-headers.patch lib_patch.Sob lib_patch.Upstream @@ -528,8 +417,6 @@ package/ifupdown/0001-dont-use-dpkg-architecture.patch lib_patch.Upstream package/igd2-for-linux/S99upnpd Shellcheck lib_sysv.Indent lib_sysv.Variables package/imx-mkimage/0001-Add-unused-fake-version.patch lib_patch.Upstream package/inadyn/S70inadyn NotExecutable lib_sysv.Indent -package/initscripts/init.d/rcK Shellcheck lib_shellscript.ConsecutiveEmptyLines lib_shellscript.EmptyLastLine -package/initscripts/init.d/rcS Shellcheck lib_shellscript.ConsecutiveEmptyLines lib_shellscript.EmptyLastLine package/input-event-daemon/S99input-event-daemon lib_sysv.ConsecutiveEmptyLines lib_sysv.Indent lib_sysv.Variables package/intel-gmmlib/0001-Drop-hardening-related-flags.patch lib_patch.Upstream package/intel-mediasdk/0001-Don-t-force-fstack-protector.patch lib_patch.Upstream @@ -549,24 +436,18 @@ package/irqbalance/S13irqbalance Shellcheck lib_sysv.Indent lib_sysv.Variables package/irrlicht/0001-override-CPPFLAGS-CXXFLAGS-and-CFLAGS-in-Makefile.patch lib_patch.Upstream package/irrlicht/0002-makefile-override-LDFLAGS-and-remove-obsolete-X11R6-.patch lib_patch.Upstream package/iucode-tool/S00iucode-tool lib_sysv.Variables -package/iwd/S40iwd Shellcheck -package/janus-gateway/0001-disable-ssp.patch lib_patch.Upstream package/kexec-lite/0001-clean-restart.patch lib_patch.Upstream package/keyutils/0001-fix-install-rule.patch lib_patch.Upstream package/keyutils/0002-cifs.patch lib_patch.Sob lib_patch.Upstream -package/kmod/0001-fix-O_CLOEXEC.patch lib_patch.Upstream package/kodi/S50kodi Shellcheck lib_sysv.Variables package/lbase64/0001-retro-compatible-with-Lua-5.1.patch lib_patch.Upstream package/lcdproc/0001-LCDd.conf.patch lib_patch.Upstream package/lcdproc/0002-Add-missing-ioctl-header.patch lib_patch.Upstream package/lcdproc/0003-Fixcompilation-with-GCC-10-x.patch lib_patch.Upstream package/leafnode2/0001-cross_makefile.patch lib_patch.Upstream -package/let-me-create/0001-fix-build-with-musl-C-library.patch lib_patch.Upstream package/leveldb/0001-Fix-compilation-with-g-4.8.2.patch lib_patch.Upstream package/leveldb/0002-CMake-install-libmemenv.a.patch lib_patch.Upstream package/leveldb/0003-CMakeLists.txt-check-for-atomic-library.patch lib_patch.Upstream -package/lftp/0001-Fix-build-with-LibreSSL-following-commit-537f37898.patch lib_patch.Upstream -package/lftp/0002-src-lftp_ssl.c-fix-build-with-libressl-2.7.0.patch lib_patch.Upstream package/libabseil-cpp/0001-force-position-independent-code.patch lib_patch.Upstream package/libargon2/0001-libargon2-dont-fail-on-existing-symlink.patch lib_patch.Upstream package/libart/0001-art-config-cross.patch lib_patch.Sob lib_patch.Upstream @@ -575,11 +456,7 @@ package/libavl/0001-fix-makefile.patch lib_patch.Upstream package/libb64/0001-Integer-overflows.patch lib_patch.Upstream package/libb64/0002-Initialize-C++-objects.patch lib_patch.Upstream package/libcdaudio/0001-libcdaudio-enable-autoreconf.patch lib_patch.Upstream -package/libcgi/0001-CMakeLists.txt-honour-BUILD_TESTING.patch lib_patch.Upstream package/libcgicc/0001-disable-documentation-option.patch lib_patch.Sob lib_patch.Upstream -package/libconfuse/0001-Fix-163-unterminated-username-used-with-getpwnam.patch lib_patch.Upstream -package/libcorrect/0002-CMakeLists.txt-conditionally-use-fsanitize-address.patch lib_patch.Upstream -package/libcuefile/0001-fix-static-link.patch lib_patch.Upstream package/libdaemon/0001-testd-use-unistd-h-instead-of-sys-unistd-h.patch lib_patch.Upstream package/libdnet/0001-python-makefile.patch lib_patch.Upstream package/libdrm/0001-tests-meson.build-disable-nouveau-tests-for-static-b.patch lib_patch.Upstream @@ -589,10 +466,6 @@ package/libedit/0001-check-bsd-functions-in-libbsd.patch lib_patch.Upstream package/libevent/0001-Don-t-define-BIO_get_init-for-LibreSSL-3-5.patch lib_patch.Upstream package/libffi/0001-Fix-use-of-compact-eh-frames-on-MIPS.patch lib_patch.Upstream package/libfm/0001-modules-fix-cross-compilation.patch lib_patch.Upstream -package/libfreeimage/0001-no-root-install.patch lib_patch.Upstream -package/libfreeimage/0002-fix-cpuid-x86.patch lib_patch.Upstream -package/libfreeimage/0003-fix-big-endian-os.patch lib_patch.Upstream -package/libfreeimage/0004-fixed-C-11-warnings.patch lib_patch.Upstream package/libftdi/0001-pkgconfig_libusb.patch lib_patch.Sob lib_patch.Upstream package/libftdi/0002-libftdi.pc-requires-libusb-fix-static-build.patch lib_patch.Sob lib_patch.Upstream package/libfuse/0001-fix-aarch64-build.patch lib_patch.Upstream @@ -600,12 +473,7 @@ package/libfuse/0002-util-ulockmgr_server-c-conditionally-define-closefrom-fix-g package/libgcrypt/0001-configure.ac-add-an-option-to-disable-tests.patch lib_patch.Upstream package/libgpiod/0001-build-add-a-configure-switch-for-building-examples.patch lib_patch.Upstream package/libgsm/0001-Misc-fixes-from-Archlinux.patch lib_patch.Upstream -package/libgtk2/0001-reduce-dependencies.patch lib_patch.Upstream package/libgtk3/0001-Remove-Gdk-dependency-from-gtk-encode-symbolic-svg.patch lib_patch.Upstream -package/libhdhomerun/0001-dont-strip.patch lib_patch.Upstream -package/libiio/S99iiod Shellcheck lib_sysv.Variables -package/libiqrf/0001-cmake-handle-static-library-and-find-required-thread.patch lib_patch.Upstream -package/libiqrf/0002-use-only-c-language.patch lib_patch.Upstream package/libjson/0001-fix-broken-makefile.patch lib_patch.Upstream package/libks/0001-CMakeLists.txt-honour-BUILD_TESTING.patch lib_patch.Upstream package/liblinear/0001-build-static-lib.patch lib_patch.Upstream @@ -627,25 +495,19 @@ package/libmpeg2/0003-fix-arm-detection.patch lib_patch.Upstream package/libmpeg2/0004-fix-sparc.patch lib_patch.Upstream package/libnetfilter_conntrack/0001-conntrack-fix-build-with-kernel-5-15-and-musl.patch lib_patch.Upstream package/libnfc/0001-autotools-make-example-build-optional.patch lib_patch.Upstream -package/libnids/0001-libpcap-use-pkg-config.patch lib_patch.Upstream package/libnss/0001-Bug-1801182-Allow-overriding-OS_ARCH-OS_TEST-and-OS_.patch lib_patch.Upstream package/libodb-mysql/0001-fix-syntax-issue-while-checking-ldflags.patch lib_patch.Upstream package/libodb-mysql/0002-mariadb-FTBFS-fix.patch lib_patch.Upstream -package/libopenssl/0001-Reproducible-build-do-not-leak-compiler-path.patch lib_patch.Upstream -package/libopenssl/0002-Configure-use-ELFv2-ABI-on-some-ppc64-big-endian-sys.patch lib_patch.Upstream package/liboping/0001-fix-utf8-support.patch lib_patch.Upstream package/liboping/0002-Open-raw-sockets-when-adding-hosts-not-when-doing-th.patch lib_patch.Upstream package/liboping/0003-Fix-compile-break-with-GCC-7-buffer-overflow-with-snprintf.patch lib_patch.Upstream package/liboping/0004-Fix-compile-error-on-GCC-7.patch lib_patch.Upstream package/liboping/0005-src-oping.c-always-use-s-style-format-for-printf-sty.patch lib_patch.Upstream -package/libp11/0001-src-p11_attr.c-fix-build-with-gcc-4.8.patch lib_patch.Upstream package/libpthsem/0001-fix-build-on-linux-3.x-host.patch lib_patch.Upstream package/libressl/0001-always-expose-SSL_OP_NO_TLSv1_3.patch lib_patch.Upstream -package/libroxml/0001-src-roxml_mem.h-add-missing-extern.patch lib_patch.Upstream package/librsvg/0001-gdk-pixbuf-loader-Makefile.am-set-GDK_PIXBUF_MODULED.patch lib_patch.Upstream package/librtlsdr/0001-Makefile.am-respect-DESTDIR-with-install-udev-rules.patch lib_patch.Upstream package/libselinux/0001-Do-not-use-PYCEXT-and-rely-on-the-installed-file-nam.patch lib_patch.Upstream -package/libsepol/0001-support-static-only.patch lib_patch.Upstream package/libserial/0001-SerialPort.cpp-fix-build-when-size_t-is-an-unsigned-.patch lib_patch.Upstream package/libserial/0002-SerialPort.cpp-don-t-use-high-baudrates-when-not-ava.patch lib_patch.Upstream package/libshdata/0001-backend-Add-missing-include-files.patch lib_patch.Upstream @@ -657,22 +519,13 @@ package/libsigrok/0001-Support-glibmm-2.68.patch lib_patch.Upstream package/libsigrokdecode/0001-configure-ac-Add-support-for-Python-3-9.patch lib_patch.Upstream package/libsigrokdecode/0002-configure-Add-python-3-10-support.patch lib_patch.Upstream package/libsigrokdecode/0003-configure-ac-Use-python3-embed-pc-as-a-fallback.patch lib_patch.Upstream -package/libsoxr/0001-Add-Libs.private-for-static-linking.patch lib_patch.Upstream package/libspatialindex/0001-allow-building-static-libs.patch lib_patch.Upstream package/libspatialindex/0002-CMakeLists.txt-fix-CMAKE_BUILD_TYPE.patch lib_patch.Upstream package/libsquish/0001-Makefile-add-f-option-for-ln-to-remove-existing-dest.patch lib_patch.Upstream -package/libsvg/0001-fix-expat-static-declaration.patch lib_patch.Upstream -package/libsvg/0002-Fix-undefined-symbol-png_set_gray_1_2_4_to_8.patch lib_patch.Upstream -package/libsvgtiny/0001-disable-debug-printfs.patch lib_patch.Upstream -package/libsvgtiny/0002-Remove-Werror.patch lib_patch.Upstream -package/libsvgtiny/0003-Hopefully-silence-warnings-about-inlines-and-non-inlines-calling-one.patch lib_patch.Upstream -package/libsvgtiny/0004-Build-Include-gperf-generated-code-directly.patch lib_patch.Upstream package/libtalloc/0001-buildtools-wafsamba-add-disable-stack-protector-opti.patch lib_patch.Upstream package/libtelnet/0001-fix-compilation-without-zlib.patch lib_patch.Upstream -package/libtheora/0001-link-libtheoradec.patch lib_patch.Upstream package/libtomcrypt/0001-fix-CVE-2019-17362.patch lib_patch.Upstream package/libtommath/0001-Build-test-bn_mp_set_double-c-on-more-platforms.patch lib_patch.Upstream -package/libtorrent/0001-libtorrent.pc.in-add-Libs.Private.patch lib_patch.Upstream package/libubootenv/0001-src-CMakeLists.txt-do-not-force-the-build-of-a-share.patch lib_patch.Upstream package/libuio/0001-configure.ac-set-automake-strictness-to-foreign.patch lib_patch.Upstream package/liburcu/0001-Only-blacklist-ARM-gcc-4.8.0-and-4.8.1.patch lib_patch.Upstream @@ -680,9 +533,6 @@ package/libvpx/0001-vpx_mem-vpx_mem.h-Fix-compilation-with-uClibc.patch lib_patc package/libyuv/0001-i386-sse2.patch lib_patch.Upstream package/lighttpd/0001-Modify-the-default-lighttpd-configuration-file-to-ha.patch lib_patch.Upstream package/lighttpd/S50lighttpd Shellcheck lib_sysv.EmptyLastLine lib_sysv.Indent lib_sysv.Variables -package/linknx/0001-configure-ac-tweak-CPPUNIT-conditional.patch lib_patch.Upstream -package/linknx/0002-src-Makefile.am-fix-linking-with-log4cpp.patch lib_patch.Upstream -package/linphone/0001-src-core-paths-paths.cpp-fix-powerpc-build.patch lib_patch.Upstream package/linux-zigbee/0001-test-serial-Remove-test-serial.patch lib_patch.Upstream package/linux-zigbee/0002-addrdb-coord-config-parse.y-add-missing-time.h-inclu.patch lib_patch.Upstream package/linuxptp/S65ptp4l Shellcheck lib_sysv.Indent @@ -691,24 +541,17 @@ package/lirc-tools/0001-plugins-devinput.c-fix-build-with-musl-1.2.0.patch lib_p package/lirc-tools/0002-configure-add-disable-doc-option.patch lib_patch.Upstream package/lirc-tools/S25lircd lib_sysv.Indent lib_sysv.Variables package/live555/0001-Add-a-pkg-config-file-for-the-shared-libraries.patch lib_patch.Upstream -package/lldpd/S60lldpd Shellcheck lib_sysv.Indent lib_sysv.Variables -package/lm-sensors/0001-static-build.patch lib_patch.Upstream -package/lm-sensors/0002-no-host-ldconfig.patch lib_patch.Upstream +package/lm-sensors/0001-no-host-ldconfig.patch lib_patch.Upstream package/lmbench/0001-scripts-build-use-bin-bash-as-shell.patch lib_patch.Upstream package/lmbench/0002-src-Makefile-add-lmbench-to-list-of-executables.patch lib_patch.Upstream package/lmbench/0003-TOO_LONG-100-usec-to-prevent-memsize-from-timingout-.patch lib_patch.Upstream -package/lmbench/0004-Fix-garbage-pointer-for-lat_rpc-S-localhost.patch lib_patch.Upstream -package/localedef/0002-relax-dependency-on-GCC-to-4.8-and-binutils-to-2.24.patch lib_patch.Upstream -package/lockdev/0001-Makefile-install-static-library-and-headers-separate.patch lib_patch.Upstream package/lockfile-progs/0001-sus3v-legacy.patch lib_patch.Sob lib_patch.Upstream package/lshw/0001-solve-Compile-error-when-g-version-is-less-than-5.patch lib_patch.Upstream package/ltrace/0001-arm-plt.patch lib_patch.Upstream package/ltrace/0002-sparc-add-missing-library.h-include.patch lib_patch.Upstream -package/ltrace/0003-configure.ac-fix-autoreconf-with-autoconf-2.70.patch lib_patch.Upstream package/lttng-babeltrace/0001-tests-lib-Makefile.am-remove-unneeded-static-flag.patch lib_patch.Upstream package/lttng-babeltrace/0002-configure.ac-fix-popt-static-build.patch lib_patch.Upstream package/lttng-libust/0001-configure.ac-add-disable-tests.patch lib_patch.Upstream -package/lttng-tools/0001-configure.ac-add-disable-tests.patch lib_patch.Upstream package/lua-gd/0001-Protect-declaration-of-LgdImageCreateFromPng-with-GD.patch lib_patch.Upstream package/lua-lunix/0001-remove-link-with-librt.patch lib_patch.Upstream package/lua-sdl2/0001-Do-not-reference-host-directory-for-headers.patch lib_patch.Upstream @@ -739,8 +582,6 @@ package/matchbox-panel/0003-mb-applet-battery.patch lib_patch.Upstream package/matchbox-startup-monitor/0001-true-false.patch lib_patch.Upstream package/matchbox/0001-defaulttheme.patch lib_patch.Upstream package/matchbox/0002-src-Fix-build-with-gcc-10.patch lib_patch.Upstream -package/mediastreamer/0001-src-videofilters-nowebcam.c-fix-build-without-ffmpeg.patch lib_patch.Upstream -package/mediastreamer/0002-Use-AV_INPUT_BUFFER_PADDING_SIZE-to-determine-paddin.patch lib_patch.Upstream package/memstat/0001-PATH_MAX.patch lib_patch.Upstream package/mender-connect/S43mender-connect Shellcheck package/menu-cache/0001-Support-gcc10-compilation.patch lib_patch.Upstream @@ -748,17 +589,11 @@ package/mesa3d-demos/0001-demos-makes-opengl-an-optional-component.patch lib_pat package/meson-tools/0001-amlbootenc-gxl-remove-non-std-C-convention-in-for.patch lib_patch.Upstream package/meson/0001-Prefer-ext-static-libs-when-default-library-static.patch lib_patch.Upstream package/meson/0002-mesonbuild-dependencies-base.py-add-pkg_config_stati.patch lib_patch.Upstream -package/metacity/0001-add-libm-reference.patch lib_patch.Upstream -package/metacity/0002-gconf.patch lib_patch.Upstream -package/metacity/0003-mag-add-libm-reference.patch lib_patch.Upstream package/mfgtools/0001-lnx_def.h-fix-conflicting-declaration-of-__time64_t.patch lib_patch.Upstream package/mii-diag/0001-strchr.patch lib_patch.Sob lib_patch.Upstream -package/mini-snmpd/0001-linux.c-fix-musl-build.patch lib_patch.Upstream package/minidlna/S60minidlnad Shellcheck lib_sysv.Indent lib_sysv.Variables package/minissdpd/S50minissdpd Shellcheck lib_sysv.Indent lib_sysv.Variables package/modem-manager/S44modem-manager Shellcheck lib_sysv.Variables -package/mongrel2/0001-Do-not-run-tests.patch lib_patch.Upstream -package/mongrel2/0002-Fix-Makefiles-for-cross-compilation.patch lib_patch.Upstream package/monit/0001-Do-not-force-building-a-statically-linked-binary.patch lib_patch.Upstream package/mono-gtksharp3/0001-Fixes-MONO_PROFILE_ENTER_LEAVE-undeclared.patch lib_patch.Upstream package/mono-gtksharp3/0002-Mono-compilation-error-branch.patch lib_patch.Upstream @@ -767,15 +602,8 @@ package/mono/0002-Ongoing-work-on-the-cmake-build.patch lib_patch.Upstream package/motion/S99motion Shellcheck lib_sysv.Indent lib_sysv.Variables package/mpir/0001-mpn-arm-udiv.asm-workaround-binutils-bug-14887.patch lib_patch.Upstream package/mraa/0001-include-Declare-gVERSION-global-as-extern.patch lib_patch.Upstream -package/mrouted/S41mrouted NotExecutable package/mrp/S65mrp lib_sysv.Indent lib_sysv.Variables -package/mstpd/0001-bridge-stp.in-support-different-versions-of-pidof-13.patch lib_patch.Upstream package/multipath-tools/S60multipathd Shellcheck -package/musepack/0001-shared.patch lib_patch.Upstream -package/musepack/0002-cmake-use-the-standard-CMake-flag-to-drive-the-share.patch lib_patch.Upstream -package/musepack/0003-include-fpu-control-with-glibc-only.patch lib_patch.Upstream -package/musepack/0004-missing-sys-select.patch lib_patch.Upstream -package/musepack/0005-fix-build-with-gcc-10.patch lib_patch.Upstream package/musl/0001-avoid-kernel-if_ether.h.patch lib_patch.Upstream package/musl/0002-package-musl-Make-scheduler-functions-Linux-compatib.patch lib_patch.Upstream package/nano/0001-lib-getrandom.c-fix-build-with-uclibc-1.0.35.patch lib_patch.Upstream @@ -822,11 +650,9 @@ package/norm/0003-Fix-mixed-tabs-spaces-in-protolib-wscript.patch lib_patch.Upst package/nss-pam-ldapd/S45nslcd Shellcheck lib_sysv.EmptyLastLine lib_sysv.Indent lib_sysv.Variables package/ntp/S49ntp.in lib_sysv.Variables package/ntpsec/0001-wscript-remove-checks-for-bsd-string.h-fixes-host-co.patch lib_patch.Upstream -package/nuttcp/0001-susv3-legacy.patch lib_patch.Upstream package/nvidia-driver/0001-use-LDFLAGS.patch lib_patch.Upstream package/octave/0001-Fix-BLAS-library-integer-size-detection.patch lib_patch.Upstream package/ofono/S46ofono lib_sysv.Variables -package/ola/0001-ola-fix-compilation-with-musl-1-2-3.patch lib_patch.Upstream package/olsr/0001-olsrd-migrate-to-using-bison-3.7.1.patch lib_patch.Upstream package/olsr/0002-lib-pud-Makefile-fix-parallel-build.patch lib_patch.Upstream package/olsr/0003-pud-adapt-to-API-changes-in-gpsd-3-20.patch lib_patch.Upstream @@ -835,8 +661,9 @@ package/olsr/0006-build-patch-for-gpsd-3-25.patch lib_patch.Upstream package/olsr/S50olsr Shellcheck lib_sysv.Indent lib_sysv.Variables package/open-plc-utils/0001-Remove-OWNER-and-GROUPS-parameters-to-install.patch lib_patch.Upstream package/open2300/0001-fix-makefile.patch lib_patch.Upstream -package/openjdk/17.0.9+9/0001-Add-ARCv2-ISA-processors-support-to-Zero.patch lib_patch.Upstream -package/openjdk/21.0.1+12/0001-Add-ARCv2-ISA-processors-support-to-Zero.patch lib_patch.Upstream +package/openjdk/17.0.18+8/0001-Add-ARCv2-ISA-processors-support-to-Zero.patch lib_patch.Upstream +package/openjdk/21.0.10+7/0001-Add-ARCv2-ISA-processors-support-to-Zero.patch lib_patch.Upstream +package/openjdk/25.0.2+10/0001-Add-ARCv2-ISA-processors-support-to-Zero.patch lib_patch.Upstream package/openldap/0001-fix-bignum.patch lib_patch.Upstream package/openldap/0002-disable-docs.patch lib_patch.Upstream package/openntpd/S49ntp Shellcheck lib_sysv.Variables @@ -844,27 +671,22 @@ package/openocd/0001-configure-enable-build-on-uclinux.patch lib_patch.Upstream package/openpgm/0001-Rename-openpgm-5.2.pc.in.patch lib_patch.Upstream package/openpgm/0002-openpgm-pgm-checksum.c-fix-build-with-32-bits-MMX.patch lib_patch.Upstream package/openpgm/0003-fix-build-on-macOS-ARM.patch lib_patch.Upstream -package/openpowerlink/0001-install-the-stack-libraries-to-lib-subdirectory.patch lib_patch.Upstream -package/openpowerlink/0002-cmake-install-oplk-headers-files.patch lib_patch.Upstream -package/openpowerlink/0003-Add-top-level-CMakeLists.txt.patch lib_patch.Upstream package/openrc/0001-init.d-sysctl.in-add-support-for-busybox-sysctl.patch lib_patch.Upstream package/openrc/0002-sh-init.sh.Linux.in-change-run-lock-from-root-uucp-t.patch lib_patch.Upstream package/openrc/0003-init.d-agetty-replace-sbin-agetty-by-sbin-getty.patch lib_patch.Upstream package/openrc/0004-init.d-agetty-start-agetty-after-all-sevices.patch lib_patch.Upstream package/openrc/0005-runlevels-do-not-add-agetty.tty-1-6-if-MKSYSVINIT-ye.patch lib_patch.Upstream package/openrc/0006-Also-create-run-lock-subsys-directory.patch lib_patch.Upstream -package/openswan/0001-lib-libopenswan-constants.c-workaround-missing-ns_t_.patch lib_patch.Upstream package/opentyrian/0001-Move-definitions-that-don-t-need-to-be-exposed-from-opl-h-to-opl-c.patch lib_patch.Upstream -package/openvmtools/0001-no_cflags_werror.patch lib_patch.Upstream -package/openvmtools/0002-dont-force-cppflags.patch lib_patch.Upstream -package/openvmtools/0003-Rename-poll-h-into-vm_poll-h-to-fix-build-failure-on-musl.patch lib_patch.Upstream +package/openvmtools/0001-configure.ac-disable-Werror.patch lib_patch.Upstream +package/openvmtools/0002-m4-do-not-force-I-usr-include-in-CPPFLAGS.patch lib_patch.Upstream package/openvmtools/0004-Remove-assumptions-about-glibc-being-only-libc-imple.patch lib_patch.Upstream package/openvmtools/0005-Use-configure-test-for-struct-timespec.patch lib_patch.Upstream package/openvmtools/0006-Fix-definition-of-ALLPERMS-and-ACCESSPERMS.patch lib_patch.Upstream package/openvmtools/0007-Use-configure-to-test-for-feature-instead-of-platfor.patch lib_patch.Upstream package/openvmtools/0008-Use-configure-test-for-sys-stat.h-include.patch lib_patch.Upstream -package/openvmtools/0011-open-vm-tools-vmhgfs-fuse-fsutils.h-fix-build-on-mus.patch lib_patch.Upstream -package/openvmtools/0012-Make-HgfsConvertFromNtTimeNsec-aware-of-64-bit-time_.patch lib_patch.Upstream +package/openvmtools/0009-open-vm-tools-vmhgfs-fuse-fsutils.h-fix-build-on-mus.patch lib_patch.Upstream +package/openvmtools/0010-Make-HgfsConvertFromNtTimeNsec-aware-of-64-bit-time_.patch lib_patch.Upstream package/openvmtools/shutdown Shellcheck package/openvpn/S60openvpn Shellcheck lib_sysv.Indent lib_sysv.Variables package/oprofile/0001-musl.patch lib_patch.Upstream @@ -872,18 +694,12 @@ package/opusfile/0001-Propagate-allocation-failure-from-ogg_sync_buffer.patch li package/owfs/S55owserver Shellcheck lib_sysv.Variables package/owfs/S60owfs Shellcheck lib_sysv.Variables package/owl-linux/0001-fix-for-linux-3.3.x.patch lib_patch.Upstream -package/patch/0001-Fix-segfault-with-mangled-rename-patch.patch lib_patch.Upstream package/patch/0002-Allow-input-files-to-be-missing-for-ed-style-patches.patch lib_patch.Upstream -package/patch/0003-Fix-arbitrary-command-execution-in-ed-style-patches-.patch lib_patch.Upstream -package/patch/0004-Invoke-ed-directly-instead-of-using-the-shell.patch lib_patch.Upstream -package/patch/0005-Don-t-follow-symlinks-unless--follow-symlinks-is-given.patch lib_patch.Upstream package/patchelf/0001-Add-option-to-make-the-rpath-relative-under-a-specif.patch lib_patch.Upstream package/paxtest/0001-genpaxtest-move-log-location.patch lib_patch.Upstream package/paxtest/0002-paxtest-page-alignment-ARM-and-NIOS2-arch.patch lib_patch.Upstream package/pcm-tools/0001-pmu-query.py-fix-python3-errors-add-linux-platform-s.patch lib_patch.Upstream package/pcmanfm/0001-po-de-po-fix-build-with-gettext-tiny.patch lib_patch.Upstream -package/pcre/0001-Kill-compatibility-bits.patch lib_patch.Upstream -package/pcre/0002-Disable-C-unit-tests.patch lib_patch.Upstream package/pdmenu/0001-autoconf-makeinfo.in-link-with-INTLLIBS-if-needed.patch lib_patch.Upstream package/pdmenu/0002-Makefile-autoconf-makeinfo.in-support-build-install-.patch lib_patch.Upstream package/perl-net-ssleay/0001-fix-build-system.patch lib_patch.Upstream @@ -892,20 +708,13 @@ package/perl-xml-libxml/0001-Makefile-PL.patch lib_patch.Upstream package/php-geoip/0001-add-build-support-for-php8.patch lib_patch.Upstream package/php-lua/0001-ZEND_ACC_ALLOW_STATIC-ZEND_ACC_STATIC-for-static-met.patch lib_patch.Upstream package/php-lua/0002-php8-explicitly-declare-arginfo.patch lib_patch.Upstream -package/php-zmq/0001-updates-for-php7.4-and-php8.0.patch lib_patch.Upstream -package/php-zmq/0002-fix-for-php-7.3.patch lib_patch.Upstream -package/php-zmq/0003-fix-for-php-8.0.0beta2.patch lib_patch.Upstream package/php/0001-acinclude.m4-don-t-unset-variables.patch lib_patch.Upstream package/php/0002-iconv-tweak-iconv-detection.patch lib_patch.Upstream package/php/0003-configure-disable-the-phar-tool.patch lib_patch.Upstream package/php/0004-Call-apxs-with-correct-prefix.patch lib_patch.Upstream -package/php/0005-allow-opcache-cross-compiling.patch lib_patch.Upstream package/pifmrds/0001-Makefile-cross-compile-friendly.patch lib_patch.Upstream package/pifmrds/0002-Makefile-use-LDFLAGS.patch lib_patch.Upstream package/pifmrds/0003-Makefile-fix-static-link.patch lib_patch.Upstream -package/pigpio/S50pigpio Shellcheck lib_sysv.Variables -package/pistache/0001-src-common-transport.cc-fallback-value-for-RUSAGE_TH.patch lib_patch.Upstream -package/pistache/0002-src-server-listener.cc-fix-libressl-build.patch lib_patch.Upstream package/pkgconf/0001-Only-prefix-with-the-sysroot-a-subset-of-variables.patch lib_patch.Upstream package/pkgconf/pkg-config.in Shellcheck package/poke/0001-configure.ac-HELP2MAN-replace-by-true-when-cross-com.patch lib_patch.Upstream @@ -923,10 +732,6 @@ package/prosody/0002-add-pidfile.patch lib_patch.Upstream package/prosody/S50prosody Shellcheck lib_sysv.Indent lib_sysv.Variables package/proxychains-ng/0001-add-configure-check-for-non-POSIX-compliant-getnameinfo-signature.patch lib_patch.Upstream package/ptpd/S65ptpd Shellcheck lib_sysv.Indent lib_sysv.Variables -package/ptpd2/0001-musl.patch lib_patch.Upstream -package/ptpd2/0002-ntp_isc_md5-rename-EVP_MD_CTX-into-PTPD_EVP_MD_CTX.patch lib_patch.Upstream -package/ptpd2/0003-Solve-issue-25-Removing-type-U64-from-net-snmp-relat.patch lib_patch.Upstream -package/ptpd2/S65ptpd2 Shellcheck lib_sysv.Indent lib_sysv.Variables package/pulseaudio/0001-shm.c-use-_Static_assert-instead-of-static_assert-fo.patch lib_patch.Upstream package/pulseaudio/S50pulseaudio lib_sysv.ConsecutiveEmptyLines lib_sysv.EmptyLastLine lib_sysv.Indent lib_sysv.Variables package/pulseview/0001-Replace-obsolete-deprecated-Qt-methods.patch lib_patch.Upstream @@ -935,7 +740,6 @@ package/python-pybind/0001-pybind11-commands.py-support-STAGING_DIR.patch lib_pa package/python-pylibftdi/0001-do-not-use-find-library.patch lib_patch.Upstream package/python-pyqt5/0001-configure-skip-qtdetail.patch lib_patch.Upstream package/python-pyqt5/0002-fix-QtCoremod.sip-syntax-error.patch lib_patch.Upstream -package/python-pyudev/0001-Workaround-finding-libudev-on-systems-without-ldconf.patch lib_patch.Upstream package/python-pyzmq/0001-detect.py-fix-the-ZMQ-version-check-to-the-ZMQ-versi.patch lib_patch.Upstream package/python-scipy/0001-build-sh4-FE.patch lib_patch.Upstream package/python-setuptools/0001-add-executable.patch lib_patch.Upstream @@ -945,11 +749,7 @@ package/qextserialport/0001-Create-a-main-include-file-QExtSerialPort.patch lib_ package/qextserialport/0002-Tell-qmake-to-add-a-pkgconfig-file-to-ease-usage-wit.patch lib_patch.Upstream package/qt5/qt5base/0001-qtbase-Fix-build-error-when-using-EGL.patch lib_patch.Upstream package/qt5/qt5base/0002-double-conversion-enable-for-microblaze.patch lib_patch.Upstream -package/qt5/qt5base/0003-double-conversion-enable-for-nios2.patch lib_patch.Upstream -package/qt5/qt5base/0004-double-conversion-enable-for-xtensa.patch lib_patch.Upstream package/qt5/qt5base/0005-eglfs-avoid-breaking-compilation-for-obscure-EGLNativeDisplayType-types.patch lib_patch.Upstream -package/qt5/qt5base/0006-Fix-build-on-riscv32.patch lib_patch.Upstream -package/qt5/qt5base/0007-src-corelib-configure.json-fix-atomicfptr-detection.patch lib_patch.Upstream package/qt5/qt5base/0008-eglconvenience-add-missing-QList-include.patch lib_patch.Upstream package/qt5/qt5declarative/0001-qsgtexture-fix-debug-build-with-uclibc.patch lib_patch.Upstream package/qt5/qt5declarative/0002-qv4regexp_p-needs-c-limits-include-instead-of-plain-.patch lib_patch.Upstream @@ -957,10 +757,8 @@ package/qt5/qt5enginio/0001-Do-not-use-deprecated-QLinkedList.patch lib_patch.Up package/qt5/qt5location/0001-3rdparty-mapbox-gl-native-fix-musl-compile-pthread_g.patch lib_patch.Upstream package/qt5/qt5script/0001-Detect-32-bits-armv8-a-architecture.patch lib_patch.Upstream package/qt5/qt5tools/0001-Disable-designer-tool-fixes-configure-error.patch lib_patch.Upstream -package/qt5/qt5webengine-chromium/0001-Add-python3-build-support.patch lib_patch.Upstream -package/qt5/qt5webengine-chromium/0002-Don-t-rebase-sysroot-path.patch lib_patch.Upstream +package/qt5/qt5webengine-chromium/0001-Don-t-rebase-sysroot-path.patch lib_patch.Upstream package/qt5/qt5webengine/0001-gn.pro-don-t-link-statically-with-libstc.patch lib_patch.Upstream -package/qt5/qt5webengine/0002-Add-python3-build-support.patch lib_patch.Upstream package/qt5/qt5webkit/0001-WinCairo-PlayStation-ICU-68.1-no-longer-exposes-FALS.patch lib_patch.Upstream package/qt5/qt5webkit/0002-Fix-compilation-with-Python-3.9-avoid-passing-encodi.patch lib_patch.Upstream package/qt5/qt5webkit/0003-Let-Bison-generate-the-header-directly-to-fix-build-.patch lib_patch.Upstream @@ -968,7 +766,6 @@ package/qt5/qt5webkit/0004-Remove-invalid-g_object-declarations-to-fix-build-wi. package/qt5/qt5webkit/0005-Add-support-for-ARC-processors.patch lib_patch.Upstream package/qt5/qt5webkit/0006-Warnings-due-to-AppSinkCallbacks-struct-growth-https.patch lib_patch.Upstream package/qt5cinex/0001-Fix-execution-problem-with-Qt5.3.patch lib_patch.Upstream -package/racehound/0001-Fix-module-install-path-lib-instead-of-usr-lib-prefi.patch lib_patch.Upstream package/rapidxml/0001-ensure-internal-print-operations-are-declared-before.patch lib_patch.Upstream package/read-edid/0001-Fix-install-file-list.patch lib_patch.Upstream package/read-edid/0002-Fix-compiler-check.patch lib_patch.Upstream @@ -981,25 +778,12 @@ package/restorecond/S02restorecond Shellcheck package/ripgrep/0001-puts-jemalloc-allocator-behind-a-cargo-feature-flag.patch lib_patch.Upstream package/riscv-isa-sim/0001-riscv-disable-precompiled-headers.patch lib_patch.Upstream package/rng-tools/S21rngd Shellcheck lib_sysv.Variables -package/rocksdb/0001-build_tools-build_detect_platform-fix-C-tests.patch lib_patch.Upstream package/rpcbind/0001-Remove-yellow-pages-support.patch lib_patch.Upstream package/rpcbind/S30rpcbind lib_sysv.EmptyLastLine lib_sysv.Indent lib_sysv.Variables -package/rpi-userland/0001-Add-.pc-files-for-the-OpenGLESv2-EGL-and-bcm_host-li.patch lib_patch.Upstream -package/rpi-userland/0002-interface-remove-faulty-assert-to-make-weston-happy-.patch lib_patch.Upstream -package/rpi-userland/0003-Disable-Werror-everywhere.patch lib_patch.Upstream -package/rpi-userland/0004-host-applications-disable-missing-applications.patch lib_patch.Upstream -package/rpi-userland/0005-dtmerge-add-missing-include-for-va_list.patch lib_patch.Upstream -package/rpi-userland/0006-interface-vcos-pthreads-CMakeLists.txt-fix-build-wit.patch lib_patch.Upstream -package/rpi-userland/0007-GLES2-gl2ext.h-add-GLint64-GLuint64-and-GLsync-typed.patch lib_patch.Upstream package/rt-tests/0001-Fix-a-build-issue-with-uClibc-ng.patch lib_patch.Upstream -package/rtorrent/0001-Added--disable-execinfo-option-to-configure.patch lib_patch.Upstream -package/rubix/0001-dont-use-legacy-functions.patch lib_patch.Upstream -package/rubix/0002-misc-fixes.patch lib_patch.Sob lib_patch.Upstream package/rygel/S99rygel Shellcheck lib_sysv.Indent lib_sysv.Variables package/s6-linux-init/0001-configure-add-D_GNU_SOURCE.patch lib_patch.Upstream -package/safeclib/0001-fix-armv7-asm-inline-error-GH-115.patch lib_patch.Upstream package/samba4/0001-build-find-pre-built-heimdal-build-tools-in-case-of-.patch lib_patch.Upstream -package/samba4/0002-ldap_message_test.c-include-stdint.h-before-cmoka.h.patch lib_patch.Upstream package/samba4/S91smb Shellcheck lib_sysv.Indent lib_sysv.Variables package/sane-backends/0001-sane_backend-add-missing-config.h.patch lib_patch.Upstream package/screen/0001-Do-not-create-backup-of-old-installed-binary.patch lib_patch.Upstream @@ -1019,36 +803,15 @@ package/sentry-native/0001-sentry.h-include-ucontext.h.patch lib_patch.Upstream package/ser2net/S50ser2net Shellcheck lib_sysv.Indent lib_sysv.Variables package/setools/0001-Do-not-export-use-setools.InfoFlowAnalysis-and-setoo.patch lib_patch.Upstream package/setserial/0001-build-system-fix.patch lib_patch.Upstream -package/shadowsocks-libev/0001-configure.ac-use-pkg-config-to-find-netfilter_conntr.patch lib_patch.Upstream -package/shadowsocks-libev/0002-fix-maybe-uninitialized-errors.patch lib_patch.Upstream -package/shadowsocks-libev/0003-lib-Makefile.am-remove-static-from-LDFLAGS.patch lib_patch.Upstream package/shairport-sync/S99shairport-sync Shellcheck lib_sysv.Indent lib_sysv.Variables package/shared-mime-info/0001-Remove-incorrect-dependency-from-install-data-hook.patch lib_patch.Upstream package/shellinabox/0001-Makefile-disable-always-building-statically.patch lib_patch.Upstream -package/shellinabox/0002-CVE-2018-16789-fix-for-broken-multipart-form-data.patch lib_patch.Upstream package/skeleton-init-systemd/fakeroot_tmpfiles.sh Shellcheck package/slang/0001-slsh-libs.patch lib_patch.Upstream package/smcroute/S41smcroute NotExecutable lib_sysv.Indent lib_sysv.Variables package/smstools3/0001-fix-Makefile.patch lib_patch.Upstream package/smstools3/0002-fix-build-with-gcc-10.x.patch lib_patch.Upstream package/smstools3/S50smsd Shellcheck lib_sysv.Variables -package/snort/0001-configure.in-Avoid-path-poisoning-with-libpcap.patch lib_patch.Upstream -package/snort/0002-configure.in-Allow-to-override-the-INADDR_NONE-check.patch lib_patch.Upstream -package/snort/0003-configure.in-convert-AC_RUN_IFELSE-to-AC_CHECK_MEMBE.patch lib_patch.Upstream -package/snort/0004-configure.in-convert-AC_RUN_IFELSE-to-AC_COMPILE_IFE.patch lib_patch.Upstream -package/snort/0005-fix-sparc.patch lib_patch.Upstream -package/snort/0006-Fix-compile-error-when-building-against-uclibc-or-mu.patch lib_patch.Upstream -package/snort/0007-Fix-error-when-building-on-a-Fedora-host-machine.patch lib_patch.Upstream -package/snort/0008-Fix-NO-OPTIMIZE.patch lib_patch.Upstream -package/softether/0001-Create-autotools-plumbing-for-SoftEther.patch lib_patch.Upstream -package/softether/0002-Create-libsoftether.so-and-dynamically-link.patch lib_patch.Upstream -package/softether/0003-use-fhs-install-directories.patch lib_patch.Upstream -package/softether/0004-create-non-forking-softetherd-for-upstart-and-systemd.patch lib_patch.Upstream -package/softether/0005-change-GetExeDir-to-GetStateDir-in-Cedar-and-Mayaqua.patch lib_patch.Upstream -package/softether/0006-cross-compile.patch lib_patch.Upstream -package/softether/0007-iconv.patch lib_patch.Upstream -package/softether/0008-librt.patch lib_patch.Upstream -package/softether/0009-uclibc-ai-addrconfig.patch lib_patch.Upstream package/solarus/0001-cmake-remove-Werror.patch lib_patch.Upstream package/solarus/0002-Add-a-basic-FindOpenGLES2.cmake.patch lib_patch.Sob lib_patch.Upstream package/sox/0001-Make-SoX-support-uclibc-based-toolchains.patch lib_patch.Upstream @@ -1073,13 +836,9 @@ package/supervisor/S99supervisord lib_sysv.Variables package/suricata/0001-configure.ac-allow-the-user-to-override-RUST_TARGET.patch lib_patch.Upstream package/suricata/S99suricata Shellcheck package/swupdate/swupdate.sh Shellcheck -package/sylpheed/0001-harden-link-checker-before-accepting-click.patch lib_patch.Upstream package/sysvinit/0001-Makefile-disable-stack-protector-strong.patch lib_patch.Upstream package/tar/0001-lib-getrandom.c-fix-build-with-uclibc-1.0.35.patch lib_patch.Upstream package/targetcli-fb/S50target Shellcheck lib_sysv.Variables -package/taskd/0001-Fix-missing-cmakedefine-HAVE_GET_CURRENT_DIR_NAME.patch lib_patch.Upstream -package/taskd/0002-Use-correct-variables-for-GnuTLS-detection.patch lib_patch.Upstream -package/taskd/0003-CMakeLists-use-pkg-config-uuid-detection.patch lib_patch.Upstream package/tcf-agent/S55tcf-agent Shellcheck lib_sysv.Variables package/tftpd/S80tftpd-hpa Shellcheck lib_sysv.Indent lib_sysv.Variables package/ti-gfx/0001-newclkapi.patch lib_patch.Upstream @@ -1091,17 +850,9 @@ package/ti-sgx-um/0001-Makefile-do-not-install-init-script.patch lib_patch.Upstr package/ti-sgx-um/S80ti-sgx lib_sysv.Variables package/ti-utils/0001-plt.h-fix-build-with-gcc-10.patch lib_patch.Upstream package/tinyalsa/0001-include-time.h-before-asound.h.patch lib_patch.Upstream -package/tinycbor/0001-Makefile-add-DISABLE_WERROR.patch lib_patch.Upstream -package/tinycompress/0001-wave-add-time.h-missing-header-inclusion.patch lib_patch.Upstream package/tinydtls/0001-sha2-sha2.c-fix-build-on-big-endian.patch lib_patch.Upstream -package/tinyxml/0001-In-stamp-always-advance-the-pointer-if-p-0xef.patch lib_patch.Upstream -package/tpm2-tss/0001-Temporary-fix-for-build-without-C.patch lib_patch.Upstream package/transmission/S92transmission Shellcheck lib_sysv.ConsecutiveEmptyLines lib_sysv.Indent lib_sysv.Variables package/triggerhappy/S10triggerhappy Shellcheck lib_sysv.Indent lib_sysv.Variables -package/trinity/0001-Fix-build-with-GCC-10.patch lib_patch.Upstream -package/trinity/0002-net-proto-ip-raw.c-fix-build-with-kernel-5.13.patch lib_patch.Upstream -package/trinity/0003-Use-fcntl-h-for-dev_t-mode_t.patch lib_patch.Upstream -package/trinity/0004-drop-decnet.patch lib_patch.Upstream package/trousers/0001-Check-if-the-compiler-understands-pie-and-relro-options.patch lib_patch.Upstream package/trousers/0002-Check-that-getpwent_r-is-available-before-using-it.patch lib_patch.Upstream package/trousers/0003-Fix-build-with-LibreSSL-2-7.patch lib_patch.Upstream @@ -1109,8 +860,7 @@ package/tstools/0001-build-get-along-with-buildroot.patch lib_patch.Upstream package/tvheadend/0001-no-check_config.patch lib_patch.Upstream package/tvheadend/S99tvheadend Shellcheck lib_sysv.Indent lib_sysv.Variables package/uboot-tools/0001-drop-configh-from-tools.patch lib_patch.Upstream -package/uboot-tools/0002-tools-only-in-no-dot-config-targets.patch lib_patch.Upstream -package/uboot-tools/0003-tools-Makefile-fix-C-LD-FLAGS-with-CROSS_BUILD_TOOLS.patch lib_patch.Upstream +package/uboot-tools/0002-tools-Makefile-fix-C-LD-FLAGS-with-CROSS_BUILD_TOOLS.patch lib_patch.Upstream package/ubus/0001-Install-server-and-client-examples.patch lib_patch.Upstream package/uemacs/01-clear-ixon-termios-flag.patch lib_patch.Upstream package/uhd/0001-host-CMakeLists-add-boost-unit_test_framework-requir.patch lib_patch.Upstream @@ -1119,9 +869,7 @@ package/uhttpd/0002-Fix-TCP_FASTOPEN-related-compile-error.patch lib_patch.Upstr package/unbound/S70unbound Shellcheck package/unifdef/0001-Makefile-fix-error-on-install.patch lib_patch.Upstream package/unscd/S46unscd Shellcheck lib_sysv.Indent lib_sysv.Variables -package/unzip/0001-Add-a-CMakeFile.txt-to-ease-cross-compilation.patch lib_patch.Upstream package/upmpdcli/S99upmpdcli Shellcheck lib_sysv.Indent lib_sysv.Variables -package/uqmi/0001-uqmi-avoid-gcc-12.x-false-error-reporting-storing-th.patch lib_patch.Upstream package/urg/0001-select-h.patch lib_patch.Upstream package/urg/0002-urg-gcc6-fix-narrowing-conversion.patch lib_patch.Upstream package/usb_modeswitch/0001-fix-systemd-detection.patch lib_patch.Upstream @@ -1136,18 +884,12 @@ package/vala/0001-dont-add-dirty-to-valac-version.patch lib_patch.Upstream package/vala/vala-wrapper Shellcheck package/valgrind/0001-workaround-SIGSEGV-on-PPC.patch lib_patch.Upstream package/valgrind/0002-Define-PTRACE_GETSIGINFO-on-PowerPC-when-not-availab.patch lib_patch.Upstream -package/vboot-utils/0001-Add-missing-definition-of-MTD_CHAR_MAJOR.patch lib_patch.Upstream package/vdr/0001-getloadavg.patch lib_patch.Upstream package/vlc/0001-Disable-building-of-statically-linked-vlc-binary.patch lib_patch.Upstream package/vlc/0002-automake-add-subdir-objects-option.patch lib_patch.Upstream package/vlc/0003-build-use-pkg-config-to-get-tremor-libs.patch lib_patch.Upstream -package/vlc/0004-Fix-build-error-using-uClibc-by-adding-sys-types.h.patch lib_patch.Upstream package/vlc/0005-Don-t-assume-strerror_l-is-available.patch lib_patch.Upstream package/vlc/0006-posix-remove-ancient-run-time-fallback-to-real-time-.patch lib_patch.Upstream -package/vlc/0007-Add-support-for-freerdp2.patch lib_patch.Upstream -package/vlc/0008-configure.ac-also-use-AC_PATH_PROG-to-check-for-wayl.patch lib_patch.Upstream -package/vlc/0009-modules-video_filter-opencv_example.cpp-fix-build-wi.patch lib_patch.Upstream -package/vlc/0010-opengl-missing-library-check.patch lib_patch.Upstream package/vpnc/0001-Makefile-allow-to-override-the-PREFIX-variable.patch lib_patch.Upstream package/vpnc/0002-Makefile-allow-to-override-the-version.patch lib_patch.Upstream package/vpnc/0003-Makefile-allow-passing-custom-CFLAGS-CPPFLAGS.patch lib_patch.Upstream @@ -1166,18 +908,10 @@ package/vte/0002-build-Fix-check-for-fstack-protector-compiler-support.patch lib package/vtun/0001-fix-installation.patch lib_patch.Upstream package/vtun/0002-fix-ssl-headers-checks.patch lib_patch.Upstream package/vtun/0003-openssl11.patch lib_patch.Upstream -package/waffle/0001-cmake-forward-cflags-from-.pc-files-to-waffle-cflags.patch lib_patch.Upstream -package/waffle/0002-wayland-fix-build-against-version-1-20.patch lib_patch.Upstream -package/waffle/0003-drop-C-dependency.patch lib_patch.Upstream package/wampcc/0001-Add-RISC-V-endian-detection.patch lib_patch.Upstream package/wampcc/0002-include-wampcc-platform.h-fix-build-with-musl-1.2.0.patch lib_patch.Upstream package/wampcc/0003-Broken-build-on-Windows.patch lib_patch.Upstream package/wget/0001-lib-getrandom.c-fix-build-with-uclibc-1.0.35.patch lib_patch.Upstream -package/wilc-driver/0001-cfg80211.c-fix-missing-prandom_u32-with-Linux-6.1.0.patch lib_patch.Upstream -package/wilc-driver/0002-spi.c-fix-build-failure-on-remove-callback.patch lib_patch.Upstream -package/wilc-driver/0003-cfg80211.c-fix-build-failure-with-Linux-5.19-and-6.1.patch lib_patch.Upstream -package/wilc-driver/0004-Fix-struct-station_parameters-Linux-6.1-build-failur.patch lib_patch.Upstream -package/wilc-driver/0005-Fix-cast-warnings.patch lib_patch.Upstream package/wipe/0001-musl.patch lib_patch.Upstream package/wireless_tools/0001-remove-bzero.patch lib_patch.Upstream package/woff2/0001-CMake-Handle-multiple-libraries-being-returned-for-B.patch lib_patch.Upstream @@ -1188,7 +922,6 @@ package/x11r7/xcursor-transparent-theme/0001-fix-symlink.patch lib_patch.Upstrea package/x11r7/xdriver_xf86-input-evdev/0001-build-get-rid-of-sdkdir.patch lib_patch.Upstream package/x11r7/xdriver_xf86-input-joystick/0001-build-get-rid-of-sdkdir.patch lib_patch.Upstream package/x11r7/xdriver_xf86-input-libinput/0001-build-get-rid-of-sdkdir.patch lib_patch.Upstream -package/x11r7/xdriver_xf86-input-mouse/0001-build-get-rid-of-sdkdir.patch lib_patch.Upstream package/x11r7/xdriver_xf86-input-synaptics/0001-build-get-rid-of-sdkdir.patch lib_patch.Upstream package/x11r7/xdriver_xf86-video-fbturbo/0001-sunxi_x_g2d-drop-unused-dri2-include.patch lib_patch.Upstream package/x11r7/xdriver_xf86-video-fbturbo/0002-Use-own-thunk-functions-instead-of-fbdevHW-Weak.patch lib_patch.Upstream @@ -1202,21 +935,11 @@ package/x11r7/xdriver_xf86-video-imx/0004-Make-video-API-forward-and-backward-co package/x11r7/xdriver_xf86-video-imx/0005-xf86-video-imxfb-fix-m4-hardcodded-paths.patch lib_patch.Upstream package/x11r7/xdriver_xf86-video-imx/0006-xserver-1.14-compat.patch lib_patch.Upstream package/x11r7/xdriver_xf86-video-mach64/0001-cross-compile.patch lib_patch.Upstream -package/x11r7/xdriver_xf86-video-nouveau/0001-nouveau-fixup-driver-for-new-X-server-ABI.patch lib_patch.Upstream package/x11r7/xdriver_xf86-video-tdfx/0001-cross.patch lib_patch.Upstream package/x11r7/xserver_xorg-server/0001-include-misc.h-fix-uClibc-build.patch lib_patch.Upstream package/x11r7/xserver_xorg-server/S40xorg Shellcheck lib_sysv.Variables -package/xen/0001-9pfs-include-linux-limits.h-for-XATTR_SIZE_MAX.patch lib_patch.Upstream -package/xen/0002-Fix-build-with-64-bits-time_t.patch lib_patch.Upstream -package/xen/0003-libs-light-fix-tv_sec-printf-format.patch lib_patch.Upstream -package/xen/0004-libs-light-fix-tv_sec-fprintf-format.patch lib_patch.Upstream -package/xinetd/0001-ar.patch lib_patch.Upstream -package/xinetd/0002-destdir.patch lib_patch.Upstream -package/xinetd/0003-rpc-fix.patch lib_patch.Upstream -package/xinetd/0004-configure-rlim_t.patch lib_patch.Upstream -package/xinetd/0005-CVE-2013-4342-xinetd-ignores-user-and-group-directiv.patch lib_patch.Upstream +package/x11r7/xwayland/0001-include-misc.h-fix-uClibc-build.patch lib_patch.Upstream package/xl2tp/xl2tpd lib_shellscript.TrailingSpace -package/xml-security-c/0001-fix-build-with-libressl-3.5.0.patch lib_patch.Upstream package/yajl/0001-Let-the-shared-and-the-static-library-have-the-same-.patch lib_patch.Upstream package/yajl/0002-cmake-disable-shared-library-build-when-BUILD_SHARED.patch lib_patch.Upstream package/yajl/0003-Link-with-shared-libyajl-in-a-shared-build.patch lib_patch.Upstream @@ -1254,9 +977,9 @@ support/libtool/buildroot-libtool-v1.5.patch lib_patch.ApplyOrder lib_patch.Sob support/libtool/buildroot-libtool-v2.2.patch lib_patch.ApplyOrder lib_patch.Sob lib_patch.Upstream support/libtool/buildroot-libtool-v2.4.4.patch lib_patch.ApplyOrder lib_patch.Upstream support/libtool/buildroot-libtool-v2.4.patch lib_patch.ApplyOrder lib_patch.Sob lib_patch.Upstream +support/libtool/buildroot-libtool-v2.6.patch lib_patch.ApplyOrder lib_patch.Upstream support/misc/relocate-sdk.sh Shellcheck support/scripts/apply-patches.sh Shellcheck -support/scripts/br2-external Shellcheck support/scripts/check-bin-arch Shellcheck support/scripts/check-host-rpath Shellcheck support/scripts/expunge-gconv-modules Shellcheck diff --git a/.gitignore b/.gitignore index ec5768d053f..fb20b03daf7 100644 --- a/.gitignore +++ b/.gitignore @@ -13,3 +13,4 @@ *.rej *~ *.pyc +/br.log diff --git a/CHANGES b/CHANGES index f622f8d3878..a3bbf87872a 100644 --- a/CHANGES +++ b/CHANGES @@ -1,3 +1,1677 @@ +2026.08.1, released October 22, 2026 + + Changes with potentially large impact: + + - PHP had two very serious vulnerabilities: CVE-2026-109618, + CVE-2026-109619. If you use PHP, upgrading is *strongly* recommended. + + - Some trusted certificates from the eMudhra CA have known private keys. + This means that it is extremely easy to masquerade as whatever host + and public key infrastructure cannot be trusted at all. See + https://emudhra.we-have-a-problem.com/ for more information. + + The ca-certificates and python-certifi packages have been updated to + remove the root certificate that signs the vulnerable intermediate + certificates. If you use ca-certificates to validate TLS connections, + upgrading is *strongly* recommended. + + Note that some packages bundle their own set of root certificates, + including libnss, nodejs, and dozens of Go and Rust packages. These + have *not* been updated in this release. + + - BR2_DOWNLOAD_FORCE_CHECK_HASHES=y is supposed to make the build fail + if any download cannot be successfully verified against a known + hash. It did not do that if there is no hash file at all. + + Important / security related fixes: + + apache: CVE-2026-42356, CVE-2026-42528, CVE-2026-46729, CVE-2026-47360, + CVE-2026-48005, CVE-2026-56153, CVE-2026-56154, CVE-2026-56449, + CVE-2026-57941, CVE-2026-58415, CVE-2026-59685, CVE-2026-59797, + CVE-2026-63045, CVE-2026-63292, CVE-2026-63686, CVE-2026-63718, + CVE-2026-73636, CVE-2026-73637, CVE-2026-79768, CVE-2026-93546 + bind: CVE-2026-19033, CVE-2026-19662, CVE-2026-19666, CVE-2026-19667, + CVE-2026-19668, CVE-2026-19941, CVE-2026-75029, CVE-2026-76163, + CVE-2026-77119, CVE-2026-77692, CVE-2026-78301, CVE-2026-80274, + CVE-2026-81563, CVE-2026-81736 + bubblewrap: CVE-2026-87766 + ca-certificates: (no CVE assigned) + cannelloni: CVE-2026-37539 + distribution-registry: CVE-2026-33540, CVE-2026-35172, CVE-2026-41888 + expat: CVE-2026-102633, CVE-2026-77214, CVE-2026-93990 + gawk: CVE-2023-4156 + gcc-initial: CVE-2019-15847 + ghostscript: (no CVE assigned) + glibc: CVE-2026-18374, CVE-2026-8674, CVE-2026-89092, CVE-2026-97399 + go: CVE-2026-56857, CVE-2026-56866, CVE-2026-78659, CVE-2026-78660, + CVE-2026-78663, CVE-2026-78667, CVE-2026-78669, CVE-2026-94439, + CVE-2026-94440, CVE-2026-94444, CVE-2026-94447, CVE-2026-94448, + CVE-2026-97030, CVE-2026-97031, CVE-2026-97032 + gpsd: CVE-2026-58459 + htop: CVE-2008-5076 + kbd: CVE-2011-0460 + libde265: GHSA-mm7m-v26f-wf8x, GHSA-xp3h-6f5r-8cxp + libfuse3: (no CVE assigned) + libheif: CVE-2026-84450, CVE-2026-84451, GHSA-4h82-g446-83fm, + GHSA-4jqm-2x34-6f6r, GHSA-4rv4-953r-p24q, GHSA-73p7-m7gg-w2jv, + GHSA-8857-r8x5-7499, GHSA-8fmq-r4pf-7m57, GHSA-9c75-9g8r-4728, + GHSA-9rj8-5mp5-26c9, GHSA-fqpw-fj22-78w4, GHSA-gh5q-69gg-c964, + GHSA-hh47-fhqr-cj2r, GHSA-jc8f-p23p-5hjg, GHSA-mw6f-29j3-76f4, + GHSA-prgh-72vc-3xmc, GHSA-q492-cfcm-895h, GHSA-qwpf-5wf7-r996, + GHSA-r7gr-2xm2-23wf, GHSA-rhgw-q5g8-xjh2, GHSA-v8qw-hwjv-44hw, + GHSA-vg7w-rp49-4fc2, GHSA-w7mc-p8jc-p853, GHSA-x8r2-mggj-j6wr, + GHSA-xrp2-63fq-jm8q + libopenssl: CVE-2026-35189, CVE-2026-35191, CVE-2026-42772, + CVE-2026-54872, CVE-2026-54873, CVE-2026-54875, CVE-2026-72897, + CVE-2026-75804, CVE-2026-75805, CVE-2026-75806, CVE-2026-77696, + CVE-2026-84782, CVE-2026-84784 + libpcap: CVE-2026-0799, CVE-2026-18238, CVE-2026-18313, CVE-2026-31911, + CVE-2026-31912, CVE-2026-6244, CVE-2026-6554 + libpng: CVE-2026-46675 + libseccomp: GHSA-2hqh-5c36-grrm, GHSA-46fr-jh49-xvhx, + GHSA-4q85-33p6-j5g6 + libxml2: CVE-2026-11979 + lldpd: CVE-2026-46433 + m4: CVE-2008-1687 + mbedtls: CVE-2026-25832, CVE-2026-35336, CVE-2026-49300, + CVE-2026-50579, CVE-2026-50580, CVE-2026-50581, CVE-2026-50583, + CVE-2026-50584, CVE-2026-50585, CVE-2026-50586, CVE-2026-50587, + CVE-2026-50588, CVE-2026-50640, CVE-2026-50713, CVE-2026-54435, + CVE-2026-54441, CVE-2026-73064, CVE-2026-73096 + nano: CVE-2026-6843 + ntpsec: CVE-2026-18321 + openssh: (no CVE assigned) + openvpn: CVE-2026-84732, CVE-2026-84790, CVE-2026-88964 + patchelf: CVE-2022-44940 + pcre2: GHSA-2p8c-ff85-vh9x, GHSA-3r4p-g7gg-ppmf, GHSA-9qww-pwc4-77qq, + GHSA-fmgr-6ggq-9859, GHSA-q7rw-r7qq-2hx6, GHSA-q8g2-wprr-34m9, + GHSA-r9hj-j2rw-4q3m + php: CVE-2025-1218, CVE-2025-14181, CVE-2026-109618, CVE-2026-109619, + CVE-2026-17545, CVE-2026-6103, CVE-2026-91765, CVE-2026-91766, + CVE-2026-91767, CVE-2026-91768, CVE-2026-91769, CVE-2026-92842, + CVE-2026-93682, GHSA-6wmf-4rv5-p3rp, GHSA-w8hw-w9fx-j79w + python-twisted: CVE-2026-42304 + python3: CVE-2026-15310, CVE-2026-15806, CVE-2026-17084, + CVE-2026-19445, CVE-2026-19553, CVE-2026-19672, CVE-2026-82049 + qt6: CVE-2026-13326, CVE-2026-16762, CVE-2026-19248, CVE-2026-8168 + qt6declarative: CVE-2025-14576 + qt6svg: CVE-2021-45930 + redis: (no CVE assigned) + sdl3_image: CVE-2026-35444 + seatd: CVE-2021-41387 + skopeo: CVE-2025-11395 + suricata: CVE-2026-45747, CVE-2026-45751, CVE-2026-45752, + CVE-2026-45759, CVE-2026-45761, CVE-2026-45762, CVE-2026-45763, + CVE-2026-45764, CVE-2026-45765, CVE-2026-45766, CVE-2026-45767, + CVE-2026-45768, CVE-2026-45769, CVE-2026-45770, CVE-2026-46352, + CVE-2026-46387, CVE-2026-57222, CVE-2026-57224, CVE-2026-57227, + CVE-2026-57228, CVE-2026-57229, CVE-2026-63446, CVE-2026-63447, + CVE-2026-63448, CVE-2026-63449, CVE-2026-63450, CVE-2026-63451, + CVE-2026-63452 + tcpreplay: GHSA-27v4-xhfx-g2rx, GHSA-2wmf-4p77-784q, + GHSA-4hqm-8v2c-9pwj, GHSA-5cjx-62pj-pmgq, GHSA-5q26-7fxx-v8fh, + GHSA-777w-9599-w8g4, GHSA-fwcr-mqg6-hqmx, GHSA-jj65-mrgg-f5fx, + GHSA-m655-53p4-6qm8, GHSA-m6w7-8497-g9c9, GHSA-p3f2-88rg-9mch, + GHSA-p7xp-4gj2-x56c, GHSA-pfqg-243f-8q25, GHSA-pjh6-6hrw-vcwr, + GHSA-pmmx-m8p5-969j, GHSA-v8c4-9w98-9v6v, GHSA-ww62-mxv7-pg55 + thrift: CVE-2026-41608, CVE-2026-61373, CVE-2026-61374, CVE-2026-63772, + CVE-2026-66054, CVE-2026-66055, CVE-2026-66081, CVE-2026-66331, + CVE-2026-66837, CVE-2026-66858, CVE-2026-66859, CVE-2026-82458, + CVE-2026-82459, CVE-2026-83632, CVE-2026-83663, CVE-2026-83745, + CVE-2026-85086, CVE-2026-85087, CVE-2026-85088, CVE-2026-85476, + CVE-2026-85483, CVE-2026-85493, CVE-2026-85494, CVE-2026-86535, + CVE-2026-86536, CVE-2026-86537, CVE-2026-87117, CVE-2026-90440, + CVE-2026-91135, CVE-2026-91137, CVE-2026-92834, CVE-2026-93925, + CVE-2026-93926, CVE-2026-94633, CVE-2026-94634, CVE-2026-94635, + CVE-2026-94636, CVE-2026-94637, CVE-2026-94638, CVE-2026-94639, + CVE-2026-94642, CVE-2026-94644, CVE-2026-94645, CVE-2026-94646, + CVE-2026-94648, CVE-2026-94650, CVE-2026-94651, CVE-2026-94652, + CVE-2026-94653, CVE-2026-94654, CVE-2026-94655, CVE-2026-94656, + CVE-2026-94657, CVE-2026-94658, CVE-2026-96277, CVE-2026-96286, + CVE-2026-96287, CVE-2026-96288, CVE-2026-96289, CVE-2026-96292, + CVE-2026-96294, CVE-2026-96990 + tor: TROVE-2026-012, TROVE-2026-030, TROVE-2026-032, TROVE-2026-033, + TROVE-2026-034, TROVE-2026-035, TROVE-2026-036, TROVE-2026-038, + TROVE-2026-041, TROVE-2026-042, TROVE-2026-043, TROVE-2026-050, + TROVE-2026-051, TROVE-2026-052, TROVE-2026-053, TROVE-2026-056, + TROVE-2026-058, TROVE-2026-062, TROVE-2026-064, TROVE-2026-067 + tpm2-tools: GHSA-gwfg-w3jr-xh66, GHSA-qp88-8f4j-wv7q, + GHSA-v7w4-4gc9-qcgv + turbolua: (no CVE assigned) + unbound: CVE-2026-77860, CVE-2026-77955, CVE-2026-78227, + CVE-2026-80225, CVE-2026-81634, CVE-2026-81642, CVE-2026-82717, + CVE-2026-82720, CVE-2026-85501 + vlc: (no CVE assigned) + wireshark: CVE-2026-95387, CVE-2026-95388, CVE-2026-95389, + CVE-2026-95392, CVE-2026-95393, CVE-2026-95394, CVE-2026-95395, + CVE-2026-96415, CVE-2026-96416, CVE-2026-96417, CVE-2026-96418, + CVE-2026-96419, CVE-2026-96421, CVE-2026-96422, CVE-2026-96423, + wnpa-sec-2026-100, wnpa-sec-2026-101, wnpa-sec-2026-102, + wnpa-sec-2026-103, wnpa-sec-2026-104, wnpa-sec-2026-105, + wnpa-sec-2026-106, wnpa-sec-2026-107, wnpa-sec-2026-108, + wnpa-sec-2026-109, wnpa-sec-2026-110, wnpa-sec-2026-93, + wnpa-sec-2026-96, wnpa-sec-2026-97, wnpa-sec-2026-98, + wnpa-sec-2026-99 + wolfssl: CVE-2026-15442, CVE-2026-89102, CVE-2026-89133, + CVE-2026-89134, CVE-2026-89135, CVE-2026-89136, CVE-2026-93302, + CVE-2026-93304, CVE-2026-94417, CVE-2026-94418, CVE-2026-94419 + xdg-dbus-proxy: GHSA-r7hp-698j-2h6c + xkeyboard-config: CVE-2012-0064 + xlib_libXfont2: CVE-2026-44950, CVE-2026-59679 + xz: GHSA-5qpq-xqfv-j9pg + zabbix: CVE-2026-23920, CVE-2026-23921 + znc: CVE-2020-11022, CVE-2020-11023, CVE-2026-82373, CVE-2026-82374 + + Toolchain: + + - gcc: add microblaze frame unwinding fix to v15 and v16 + - glibc: bump to 2.44-57 + - linux-headers:: bump to 5.10.271, 5.15.222, 6.1.189, 6.6.158, + 6.12.112, 6.18.55 + + Infrastructure updates/fixes: + + - utils/docker-run: mount and pass BR2_EXTERNAL dirs + - arch: x86: add support for XOP instruction set + - utils/checkpackagelib: check IGNORE_CVES identifiers match patch + trailers + - runtime tests: test_generate_cyclonedx: additional tests for scp and + for vulnerabilities of packages with multiple possible versions + - utils/getdeveloperlib.py: fix regexp used to find package infra + - utils/checkpackagelib: support other identifiers than CVE + - utils/generate-cyclonedx: support schema version choice 1.6, 1.6.1, + 1.6.2, 1.7, 1.7.1 + - New runtime tests: tests_flat_stacksize, test_erlang, test_squid, + test_bubblewrap, test_harfbuzz, test_sqlitecpp + - package/pkg-autotools.mk: also handle libtool 2.6.x + - checkpackagelib: improve CVE handling + - enforce BR2_DOWNLOAD_FORCE_CHECK_HASHES=y for missing hash files + - utils/genrandconfig: reject qemu user mode on hosts with large pages + - pkg-stats: sort latest version by state + - support/docker/Dockerfile: make $HOME folder read-only + - utils/docker-run: add NO_NETWORK variable + - utils/check-symbols: check for undefined host symbols + - utils/generate-cyclonedx: mark host packages as excluded + + Updated / fixed packages: apache, asterisk, atop, bcc, bind, binutils, + boost, bubblewrap, ca-certificates, cannelloni, chrony, clamav, + cpp-httplib, dejavu, dhcpcd, distribution-registry, dtui, e2fsprogs, + edk2, erlang, exim, expat, falcosecurity-libs, fcft, flutter-engine, + gawk, gcc, gcc-initial, gerbera, ghostscript, glibc, + glslsandbox-player, gnu-efi, gnuradio, go, gpsd, gumbo-parser, + haproxy, haveged, hidapi, htop, hwdata, i2pd, ibm-sw-tpm2, ibrcommon, + icu, igh-ethercat, imlib2, inadyn, intel-mediasdk, intel-vpl-gpu-rt, + iproute2, ivi-homescreen, jemalloc, kbd, kodi, libabseil-cpp, + libarchive, libcamera-apps, libde265, libest, libfuse3, libgphoto2, + libgtk3, libheif, libmpeg2, libopenssl, libpcap, libpng, libseccomp, + libssh, libxml2, linux, linux-headers, linux-headers:, linux-tools, + lldpd, lua-lunix, luvi, lvm2, m4, mali-t76x, mbedtls, mpg123, + mrouted, nano, ndctl, netdata, network-manager, nnn, ntpsec, openjdk, + openjdk-bin, openscap, openssh, openvpn, passt, patchelf, pcre2, php, + pocketpy, pulseview, python-certifi, python-charset-normalizer, + python-googleapis-common-protos, python-grpcio, + python-grpcio-reflection, python-memray, python-twisted, python3, + qemu, qt5cinex, qt5knx, qt5webengine-chromium, qt6, qt6declarative, + qt6svg, redis, rpi-rgb-led-matrix, rtl8812au-aircrack-ng, rustc, + screen, sdl3_image, seatd, setserial, shadowsocks-libev, skopeo, + snort3, sofia-sip, sound-theme-borealis, sqlitecpp, strongswan, + stunnel, suricata, swig, sysprof, tcpreplay, tensorflow-lite, thrift, + toolchain-external-bootlin, tor, tpm2-tools, turbolua, tzdata, + udisks, unbound, util-linux, util-linux-libs, vboot-utils, vlc, + webkitgtk, wireless-regdb, wireshark, wmenu, wolfssl, wpewebkit, + xdg-dbus-proxy, xen, xkeyboard-config, xlib_libXfont2, xz, zabbix, + znc + +2026.08, released September 4th, 2026 + + Various fixes. + + Updated/fixed packages: dpdk, dracut, drogon, erlang, exiv2, + expat, freeswitch, gcc, glibc, libcurl, libldns, libnfs, + libopenssl, mpd, ncmpc, newt, opencv, openscap, openssh, perl, + proftpd, qemu, vim + +2026.08-rc3, released August 29th, 2026 + + Fixes all over the tree. + + Updated/fixed packages: avro-c, bind, bpftrace, collectd, + dahdi-linux, expat, fetchmail, flex, fluidsynth, gdb, glibc, + haproxy, jpeg-turbo, libbpf, libheif, libopenssl, + libxml-parser-perl, localedef, mesa3d, nodejs, olsr, perl, + php, python-avro, python-gobject, qt6, qt6declarative, redis, + rsyslog, taglib, uclibc, unbound, weston + +2026.08-rc2, released August 23th, 2026 + + Fixes all over the tree. + + Infrastructure: + - Correct _FLAT_STACKSIZE handling for nommu + + Defconfigs: QEMU x86-64 EFI: Fix build issue after grub2 bump. + + Updated/fixed packages: clamav, distribution-registry, dracut, + drogon, enscript, fluidsynth, gdb, igh-ethercat, kodi, + libgpiod2, libssh2, linux-tools, mesa3d, mtools, netsnmp, + putty, python-scp, uclibc, udisks, uhttpd, webkitgtk, wget, + wireshark, xilinx-embeddedsw + +2026.08-rc1, released August 18th, 2026 + + Fixes all over the tree and new features. + + Architectures: + - Support for M68K nommu + - Support for IBM Power 10/11 variants + + Toolchain: + - Support for Linux 7.1.x headers + - Binutils 2.46.1, GCC 16.2.0, now defaults to GCC 15 + - Glibc 2.44, uClibc-ng 1.0.59 + - Support for ARC-specific GCC version and external toolchain + dropped + + Infrastructure: + - Support for building packages written in the hare + programming language + - Libudev virtual package, similar to jpeg or openssl. + - generate-cyclonedx: fixup scp-style git sites + + New defconfigs: QEMU PPC64LE Powernv10 / Powernv11 + + Removed defconfigs: Acmesystems aria/arietta g25, Avnet S6LX9 + Microboard, Technologic TS-4900 / TS-5500 + + New packages: agec, cpp-argparse, drogon, dtui, hare, harec, + hare-dbus, hare-ev, hare-xml, libcppconnman, liblc3, libudev, + libudev-zero, perl-cgi, perl-cgi-session, perl-log-message, + perl-log-message-simple, perl-switch, python-libyang, + python-sysv-ipc, qbe, qemu-xen, qt6grpc, qt6positioning, + scdoc, sdl3, sdl3_gfx, sdl3_image, sdl3_ttf, sigsum-c, + virglrenderer, wget2 + + Removed packages: argparse, ts4900-fpga + +2026.05.3, released September 10, 2026 + + Important / security related fixes: + + avro-c: (no CVE assigned) + dnsmasq: CVE-2026-12725, CVE-2026-12969 + erlang: CVE-2026-21620, CVE-2026-23941, CVE-2026-23942, CVE-2026-23943, + CVE-2026-28810, CVE-2026-32147, CVE-2026-42789, CVE-2026-42790 + exiv2: CVE-2026-49275, CVE-2026-68546, CVE-2026-68547, + GHSA-3695-mjv8-3r52, GHSA-9v3x-mhg4-wwv2, GHSA-fgw8-p7pr-37cp, + GHSA-hxph-pv7w-8649, GHSA-jcgh-p9v3-pw6j, GHSA-vg6c-9f6h-4x5q + expat: CVE-2026-66046, CVE-2026-76641, CVE-2026-76956, CVE-2026-76957 + glibc: CVE-2026-18374, CVE-2026-19499, CVE-2026-77117, CVE-2026-80489 + go: CVE-2026-33818, CVE-2026-39821, CVE-2026-46600, CVE-2026-56853, + CVE-2026-56858, CVE-2026-56859, CVE-2026-56860, CVE-2026-56862, + CVE-2026-56864, CVE-2026-56865 + haproxy: (no CVE assigned) + hostapd: CVE-2026-58374 + libcurl: CVE-2026-13608, CVE-2026-18924, CVE-2026-19931, + CVE-2026-80229, CVE-2026-80230, CVE-2026-80231, CVE-2026-80255, + CVE-2026-82208, CVE-2026-82209 + libde265: GHSA-mm7m-v26f-wf8x, GHSA-xp3h-6f5r-8cxp + libgit2: CVE-2026-5917 + libheif: CVE-2026-84450, CVE-2026-84451, GHSA-24wx-9w62-c96w, + GHSA-2jg2-4ch7-h545, GHSA-4h82-g446-83fm, GHSA-4jqm-2x34-6f6r, + GHSA-73p7-m7gg-w2jv, GHSA-8857-r8x5-7499, GHSA-8fmq-r4pf-7m57, + GHSA-9rj8-5mp5-26c9, GHSA-g89c-p67h-r497, GHSA-gh5q-69gg-c964, + GHSA-hh47-fhqr-cj2r, GHSA-j264-xvrp-5v7q, GHSA-jc8f-p23p-5hjg, + GHSA-mw6f-29j3-76f4, GHSA-p58j-h3vm-3fp5, GHSA-w7mc-p8jc-p853, + GHSA-x8r2-mggj-j6wr, GHSA-x8xm-cm2c-cfc8, GHSA-xw34-mjcp-jqh8 + libldns: CVE-2026-10846 + libopenssl: CVE-2026-14456, CVE-2026-14457, CVE-2026-18798, + CVE-2026-54874, CVE-2026-54876, CVE-2026-63072, CVE-2026-63073, + CVE-2026-63074, CVE-2026-63075, CVE-2026-63076, CVE-2026-75803 + libssh2: CVE-2025-15661, CVE-2026-66032, CVE-2026-66033, + CVE-2026-66034, CVE-2026-66035 + localedef: CVE-2026-18374, CVE-2026-19499, CVE-2026-77117, + CVE-2026-80489 + mongoose: CVE-2026-63626, CVE-2026-73251, CVE-2026-73252, + CVE-2026-73260, CVE-2026-73261 + nodejs: CVE-2026-56846, CVE-2026-56847, CVE-2026-56848, CVE-2026-56850, + CVE-2026-58039, CVE-2026-58040, CVE-2026-58042, CVE-2026-58043, + CVE-2026-58044, CVE-2026-58045 + openvpn: CVE-2026-84732 + proftpd: CVE-2026-44331 + putty: (no CVE assigned) + python-avro: (no CVE assigned) + redis: CVE-2026-62356 + rsyslog: CVE-2026-19654 + udisks: CVE-2026-7867, GHSA-j42g-v9jw-6ph3 + unbound: CVE-2026-14586, CVE-2026-32665, CVE-2026-40622, + CVE-2026-40691, CVE-2026-41637, CVE-2026-42955, CVE-2026-44621, + CVE-2026-44687, CVE-2026-44690, CVE-2026-46582, CVE-2026-50045, + CVE-2026-50046, CVE-2026-50243, CVE-2026-50248, CVE-2026-50251, + CVE-2026-50252, CVE-2026-52863, CVE-2026-54478, CVE-2026-55708, + CVE-2026-55717, CVE-2026-55973, CVE-2026-55990, CVE-2026-55991, + CVE-2026-56416, CVE-2026-56444 + wget: CVE-2026-58469, CVE-2026-58470, CVE-2026-58471 + wireshark: CVE-2026-15163, CVE-2026-15164, CVE-2026-15166, + CVE-2026-15167, CVE-2026-15168, CVE-2026-15169, CVE-2026-15170, + CVE-2026-15171, CVE-2026-15172, CVE-2026-15174, CVE-2026-76879, + CVE-2026-76880, CVE-2026-76881, CVE-2026-76882, CVE-2026-76883, + CVE-2026-76884, CVE-2026-76885, CVE-2026-76886, CVE-2026-76887, + CVE-2026-76888, CVE-2026-76889, CVE-2026-76890, CVE-2026-76891, + CVE-2026-76917, CVE-2026-76918, CVE-2026-76919, CVE-2026-76920, + CVE-2026-76921, CVE-2026-76922, CVE-2026-76923, CVE-2026-76924, + CVE-2026-76926, CVE-2026-76927, CVE-2026-76928, CVE-2026-76929 + + Toolchain: + + - linux-headers: bump to 5.10.269, 5.15.220, 6.1.187, 6.6.156, + 6.12.109, 6.18.50 + - powerpc: correctly track libquadmath + + Infrastructure updates/fixes: + + - Fix setting of stack size for FLAT binaries + - Various fixes to the runtime tests + - manual: document the LTS release cadence correctly + - manual: document move of patchwork to patchwork.buildroot.org + + Updated defconfigs: qemu_xtensa_lx60* + + Updated / fixed packages: avro-c, bind, bpftrace, clamav, collectd, + dahdi-linux, dejavu, distribution-registry, dnsmasq, dpdk, dracut, + enscript, erlang, exiv2, expat, gdb, glibc, go, haproxy, hostapd, + igh-ethercat, jpeg-turbo, libbpf, libcurl, libde265, libgit2, + libheif, libldns, libnfs, libopenssl, libssh2, libxkbcommon, + libxml-parser-perl, libxml2, linux, linux-headers, linux-tools, + localedef, mesa3d, mongoose, netsnmp, newt, nodejs, olsr, opencv4, + openssh, openvpn, passt, perl, powerpc, proftpd, putty, python-avro, + python-charset-normalizer, python-gobject, qt5knx, qt6, qt6base, + qt6declarative, redis, rsyslog, taglib, toolchain-external-bootlin, + uclibc, udisks, uhttpd, unbound, vim, webkitgtk, wget, wine, + wireless-regdb, wireshark, xilinx-embeddedsw + +2026.05.2, released August 23, 2026 + + Important / security related fixes: + + apr-util: CVE-2025-49506, CVE-2026-32327, CVE-2026-34191, + CVE-2026-34501, CVE-2026-34502 + bind: CVE-2026-10723, CVE-2026-10822, CVE-2026-11331, CVE-2026-11605, + CVE-2026-11622, CVE-2026-11721, CVE-2026-12617, CVE-2026-13204, + CVE-2026-13321 + botan: CVE-2026-32877, CVE-2026-32883, CVE-2026-32884, CVE-2026-34580, + CVE-2026-34582 + busybox: CVE-2024-58251 + clamav: CVE-2025-8088, CVE-2026-20337, CVE-2026-20338, CVE-2026-20339, + CVE-2026-20345, CVE-2026-20346, CVE-2026-20347, CVE-2026-20348 + containerd: CVE-2026-35469, CVE-2026-46680, CVE-2026-47262, + CVE-2026-53488 + dracut: CVE-2026-6893 + dropbear: (no CVE assigned) + exim: GCVE-25-2026-07-45-1, CVE-2026-66140, CVE-2026-66141 + expat: CVE-2026-72522 + glibc: CVE-2026-6368 + go: CVE-2026-39822 + intel-microcode: CVE-2025-31936, CVE-2025-31938, CVE-2025-35973, + CVE-2026-20707, CVE-2026-20713, CVE-2026-20716, CVE-2026-20760, + CVE-2026-20917 + libarchive: (no CVE assigned) + libass: CVE-2026-61626, CVE-2026-61627 + libgit2: CVE-2026-53583, CVE-2026-53584, CVE-2026-53585, + CVE-2026-53586, CVE-2026-53587 + libglib2: CVE-2025-13601, CVE-2025-14087, CVE-2025-14512, + CVE-2026-1484, CVE-2026-1485, CVE-2026-1489, CVE-2026-15588, + CVE-2026-58010, CVE-2026-58011, CVE-2026-58012, CVE-2026-58013, + CVE-2026-58014, CVE-2026-58015 + libheif: CVE-2026-62289, CVE-2026-62291, CVE-2026-62292, + CVE-2026-62377, GHSA-46rp-pcq2-rpmr, GHSA-73p7-m7gg-w2jv, + GHSA-9ww4-9v47-m7pj, GHSA-jc8f-p23p-5hjg, GHSA-xpw3-9rhw-482x + libmodsecurity: CVE-2026-52747, CVE-2026-52761 + libssh: CVE-2026-15370, CVE-2026-59843, CVE-2026-59844, CVE-2026-59845, + CVE-2026-59846, CVE-2026-59847, CVE-2026-59848, CVE-2026-59849, + CVE-2026-59850 + localedef: CVE-2026-6368 + memcached: (no CVE assigned) + ntfs-3g: CVE-2026-42616, CVE-2026-42617, CVE-2026-42618, + CVE-2026-46569, CVE-2026-46570, CVE-2026-46571, CVE-2026-46572, + CVE-2026-56135, CVE-2026-56136 + openssh: (no CVE assigned) + openvpn: CVE-2026-63649, CVE-2026-63650 + perl: CVE-2026-13221, CVE-2026-57432, CVE-2026-8376 + php: CVE-2026-17543, CVE-2026-17544, CVE-2026-7260, CVE-2026-9672 + postgresql: CVE-2026-14662, CVE-2026-14663, CVE-2026-14664, + CVE-2026-14666, CVE-2026-14668, CVE-2026-14669, CVE-2026-14670, + CVE-2026-14671, CVE-2026-14672, CVE-2026-14673, CVE-2026-14676, + CVE-2026-14677, CVE-2026-14678, CVE-2026-14679, CVE-2026-14680, + CVE-2026-14681, CVE-2026-15741, CVE-2026-15742, CVE-2026-16238, + CVE-2026-16239, CVE-2026-16241, CVE-2026-18024, CVE-2026-18408, + CVE-2026-19385, CVE-2026-6464, CVE-2026-6469, CVE-2026-6470, + CVE-2026-6471 + python3: CVE-2026-0864, CVE-2026-11972, CVE-2026-12003, CVE-2026-15308, + CVE-2026-4360 + rsync: CVE-2026-53783, CVE-2026-53784, CVE-2026-53785, CVE-2026-53786, + CVE-2026-53788, CVE-2026-53789, CVE-2026-53790, CVE-2026-53791, + CVE-2026-53792, CVE-2026-53793, CVE-2026-53794, CVE-2026-53795, + CVE-2026-53796, CVE-2026-53797, CVE-2026-53798, CVE-2026-53799, + CVE-2026-53800, CVE-2026-53801, CVE-2026-53802, CVE-2026-53803, + CVE-2026-70452, CVE-2026-70453, CVE-2026-70454, CVE-2026-70455, + CVE-2026-70456, CVE-2026-70457, CVE-2026-70458, CVE-2026-70459, + CVE-2026-70460, CVE-2026-70461, CVE-2026-70462, CVE-2026-70463, + CVE-2026-70464 + samba4: CVE-2026-58216, CVE-2026-58218, CVE-2026-58221, CVE-2026-58222, + CVE-2026-58224, CVE-2026-6949 + screen: (no CVE assigned) + ser2net: GHSA-cgh5-39mg-vhfr + socat: CVE-2026-56123 + stunnel: CVE-2026-70367, CVE-2026-70368 + syslog-ng: CVE-2026-39879 + vim: CVE-2026-28417, CVE-2026-28418, CVE-2026-28419, CVE-2026-28420, + CVE-2026-28421, CVE-2026-28422, CVE-2026-32249, CVE-2026-33412, + CVE-2026-34714, CVE-2026-34982, CVE-2026-35177, CVE-2026-39881, + CVE-2026-41411, CVE-2026-42307, CVE-2026-44656, CVE-2026-45130, + CVE-2026-46483, CVE-2026-47162, CVE-2026-47167, CVE-2026-52858, + CVE-2026-52859, CVE-2026-52860, CVE-2026-55693, CVE-2026-55892, + CVE-2026-55895, CVE-2026-57451, CVE-2026-57452, CVE-2026-57453, + CVE-2026-57455, CVE-2026-57456, CVE-2026-59856, CVE-2026-59857, + CVE-2026-59858 + wpa_supplicant: (no CVE assigned) + xlib_libXfont2: CVE-2026-56001, CVE-2026-56002, CVE-2026-56003 + xserver_xorg-server: CVE-2026-55999, CVE-2026-56000 + xwayland: CVE-2026-55999, CVE-2026-56000 + + Toolchain: + + - gcc: fix mips/glibc build issue + - glibc: bump to 2.43-49-g8017bcfc4d + - linux-headers: bump to 5.10.265, 5.15.216, 6.1.183, 6.6.152, + 6.12.104, 6.18.45, 7.0.14 + - toolchain-buildroot: drop Synopsys ARC specific versions + - toolchain-external: drop Synopsys ARC toolchain + + Infrastructure updates/fixes: + + - Add license information for skeleton packages + - Make docker image reproducible again + - New runtime tests for guile, libgpiod2, mdnsd, php, python-pydal + + Updated defconfigs: freescale_imx91frdm, freescale_imx93frdm + + Removed defconfigs: acmesystems_aria_g25_{128mb, 256mb}, + acmesystems_arietta_g25_{128mb, 256mb}, s6lx9_microboard, ts4900, + ts5500 + + Removed packages: argparse, ts4900-fpga + + Updated / fixed packages: amazon-ecr-credential-helper, apache, + apr-util, arm-trusted-firmware, armadillo, at-spi2-core, atop, bind, + binutils, bitcoin, botan, busybox, cantarell, cifs-utils, clamav, + containerd, cramfs, dbus-broker, docker-credential-acr-env, + docker-credential-gcr, dracut, dropbear, environment-setup, exim, + expat, gcc, glibc, go, guile, gvfs, ifupdown-scripts, igt-gpu-tools, + initscripts, intel-microcode, libarchive, libass, libcamera, libgee, + libgit2, libglib2, libgpg-error, libgtk4, libgudev, libheif, + libmicrohttpd, libmodsecurity, libnpupnp, libpeas, librsvg, + libsecret, libsoup, libsoup3, libssh, libvpl, linux, linux-headers, + localedef, mbedtls, memcached, mini-snmpd, mosquitto, nettle, + network-manager, ntfs-3g, ogre, open62541, openblas, openssh, + openvpn, optee-os, p11-kit, pahole, perl, php, postgresql, + python-paho-mqtt, python-pydal, python-web2py, python3, quickjs, + redis, rsync, rygel, samba4, screen, ser2net, socat, stunnel, + syslog-ng, toolchain-external, uboot-tools, uclibc, ugetty, + urandom-scripts, usbutils, vim, wpa_supplicant, xlib_libXfont2, + xserver_xorg-server, xwayland, xz + +2026.05.1, released July 15, 2026 + + Important / security related fixes: + + apache: CVE-2026-29167, CVE-2026-29170, CVE-2026-34355, CVE-2026-34356, + CVE-2026-42535, CVE-2026-42536, CVE-2026-43951, CVE-2026-44119, + CVE-2026-44185, CVE-2026-44186, CVE-2026-44631, CVE-2026-48913, + CVE-2026-49975 + asterisk: GHSA-3g56-cgrh-95p5, GHSA-3rhj-hhw7-m6fw, + GHSA-4pgv-j3mr-3rcp, GHSA-589g-qgf8-m6mx, GHSA-746q-794h-cc7f, + GHSA-8jhw-m2hg-vp3h, GHSA-8jw3-ccr9-xrmf, GHSA-g8q2-p36q-94f6, + GHSA-h5hv-jmgj-92q2, GHSA-j2mm-57pq-jh94, GHSA-mxgm-8c6f-5p8f, + GHSA-ph27-3m5q-mj5m, GHSA-q9fr-m7g8-6ph5, GHSA-qf8j-jp7h-c5hx, + GHSA-r6c2-hwc2-j4mp, GHSA-vfhr-r9x9-c687, GHSA-vrfp-mg3q-3959, + GHSA-wcvv-g26m-wx5c, GHSA-x348-j6c9-77f3, GHSA-xgj6-2gc5-5x9c + avahi: CVE-2026-34933 + bind: (no CVE assigned), CVE-2026-3593 + clamav: CVE-2026-20213, CVE-2026-20214, CVE-2026-20215, CVE-2026-20216, + CVE-2026-20217, CVE-2026-20243, CVE-2026-20244, CVE-2026-41676 + cpp-httplib: CVE-2026-45352, CVE-2026-45372, CVE-2026-46527 + cups-filters: CVE-2025-64503 + expat: CVE-2026-50219, CVE-2026-56131, CVE-2026-56132, CVE-2026-56403, + CVE-2026-56404, CVE-2026-56405, CVE-2026-56406, CVE-2026-56407, + CVE-2026-56408, CVE-2026-56409, CVE-2026-56410, CVE-2026-56411, + CVE-2026-56412 + fetchmail: (no CVE assigned) + ghostscript: (no CVE assigned) + gnupg2: CVE-2026-34182 + imagemagick: CVE-2026-48724, CVE-2026-48733, CVE-2026-48734, + CVE-2026-48994, CVE-2026-49218, CVE-2026-49219, CVE-2026-53460, + CVE-2026-53461, CVE-2026-53462, CVE-2026-53463, CVE-2026-53464, + CVE-2026-53465 + jq: CVE-2026-32316, CVE-2026-33947, CVE-2026-33948, CVE-2026-39979, + CVE-2026-40164, CVE-2026-40612, CVE-2026-41256, CVE-2026-41257, + CVE-2026-43894, CVE-2026-43896, CVE-2026-44777, CVE-2026-49839, + CVE-2026-54679, GHSA-gf4g-95wj-4q4r, GHSA-hj52-j2c9-r8r4 + libarchive: (no CVE assigned) + libcurl: CVE-2026-10536, CVE-2026-11352, CVE-2026-11564, + CVE-2026-11586, CVE-2026-11856, CVE-2026-12064, CVE-2026-8286, + CVE-2026-8458, CVE-2026-8924, CVE-2026-8925, CVE-2026-8926, + CVE-2026-8927, CVE-2026-8932, CVE-2026-9079, CVE-2026-9080, + CVE-2026-9545, CVE-2026-9546, CVE-2026-9547 + libevent: (no CVE assigned) + libgsasl: CVE-2026-48829 + libopenssl: CVE-2026-34180, CVE-2026-34181, CVE-2026-34182, + CVE-2026-34183, CVE-2026-42764, CVE-2026-42766, CVE-2026-42767, + CVE-2026-42768, CVE-2026-42769, CVE-2026-42770, CVE-2026-45445, + CVE-2026-45446, CVE-2026-45447, CVE-2026-7383, CVE-2026-9076 + libssh2: CVE-2026-55199, CVE-2026-55200 + mariadb: CVE-2026-48163, CVE-2026-48165, CVE-2026-49261 + mongoose: (no CVE assigned yet) + nginx: CVE-2026-42055, CVE-2026-48142 + openjpeg: CVE-2026-6192 + openvpn: CVE-2026-11771, CVE-2026-12932, CVE-2026-12996, + CVE-2026-13117, CVE-2026-13122, CVE-2026-13379, CVE-2026-13698 + php: CVE-2026-14355 + python-django: CVE-2026-35192, CVE-2026-35193, CVE-2026-48587, + CVE-2026-5766, CVE-2026-6873, CVE-2026-6907, CVE-2026-7666, + CVE-2026-8404 + python3: CVE-2026-11940, CVE-2026-9669 + redis: CVE-2026-23479, CVE-2026-23631, CVE-2026-25243 + ruby: CVE-2026-46727 + rust: CVE-2025-15661, CVE-2026-55199, CVE-2026-55200 + squid: CVE-2026-47729, CVE-2026-50012 + sudo: CVE-2026-35535 + tiff: CVE-2026-36849 + tmux: CVE-2026-11623 + tor: TROVE-2026-025, TROVE-2026-026. + util-linux: CVE-2026-27456, CVE-2026-53612, CVE-2026-53613, + CVE-2026-53614 + webkitgtk: CVE-2026-28847, CVE-2026-28883, CVE-2026-28901, + CVE-2026-28902, CVE-2026-28903, CVE-2026-28904, CVE-2026-28905, + CVE-2026-28907, CVE-2026-28942, CVE-2026-28946, CVE-2026-28947, + CVE-2026-28953, CVE-2026-28955, CVE-2026-28958, CVE-2026-43658, + CVE-2026-43660 + wolfssl: CVE-2026-10097, CVE-2026-10098, CVE-2026-10512, + CVE-2026-10592, CVE-2026-11310, CVE-2026-11703, CVE-2026-11999, + CVE-2026-12340, CVE-2026-55958, CVE-2026-55960, CVE-2026-55961, + CVE-2026-55962, CVE-2026-55964, CVE-2026-55967, CVE-2026-6091, + CVE-2026-6092, CVE-2026-6094, CVE-2026-6291, CVE-2026-6325, + CVE-2026-6329, CVE-2026-6330, CVE-2026-6331, CVE-2026-6412, + CVE-2026-6450, CVE-2026-6678, CVE-2026-6681, CVE-2026-6731, + CVE-2026-7511, CVE-2026-7531, CVE-2026-7532, CVE-2026-8720 + + Toolchain: + + - gcc: bump 15.x series to 15.3.0 + - gcc:: bump 14.x series to 14.4.0 + + Infrastructure updates/fixes: + + - support/testing: various internal refactorings + - support/testing Improve TestPythonPy3NetworkmanagerGoi + - support/testing: improve iptables package test + - generate-cyclonedx: fixup scp-style git sites + - support/testing: Fix test_gnupg2 + + Updated / fixed packages: apache, asterisk, avahi, bind, bind, clamav, + cpp-httplib, cups-filters, expat, fetchmail, gcc, gcc:, ghostscript, + gnupg2, hwdata, imagemagick, iptables, jq, jq, kodi-screensaver-rsxs, + libarchive, libcurl, libepoxy, libevent, libglib2, + libglib2-bootstrap, libgsasl, libopenssl, libssh2, libssh2, linux, + mariadb, mdnsd, mongoose, mosquitto, mpd, nginx, ntp, openjpeg, + openrc, openvpn, passt, php, python-django, python3, python3, redis, + rsync, ruby, rust, shadow, shim, squid, strongswan, sudo, tiff, tmux, + tor, util-linux, util-linux, util-linux, webkitgtk, wolfssl + +2026.05, released June 8th, 2026 + + Various fixes. + + Defconfigs: Correct legal-info for at91sam9x5ek* + (at91bootstrap3) and Arcturus ucp1020 (Linux) + + Updated/fixed packages: jailhouse, libde265, libinput, libusb, + php, python3, runc + +2026.05-rc4, released June 4th, 2026 + + Fixes all over the tree. + + Infrastructure: + + - dependencies: detect and reject buggy uutils 'install' + program as used in Ubuntu 26.04 + + - pkg-generic: Cleanup /usr/share/info/dir in the target + + - generate-cyclonedx / cve-check: Various fixes for better + CycloneDX / BSI TR-03183-2 compliance + + - linux: No longer forcibly disable CONFIG_WERROR + + - 'make show-info-all' added, which works like 'make + show-info' but for all packages. The package hash files are + now also included in the show-info{,-all} output. + + Architectures: + + - Drop support for the (rare) PA-RISC 1.0 variant + + Updated/fixed packages: aardvark-dns, arm-trusted-firmware, + asterisk, babeld, bpftrace, busybox, ca-certificates, cairo, + capnproto, collectd, cppdb, crucible, cups-filters, + docker-cli, docker-engine, drm-info, efl, esp-hosted, exim, + faad2, freeipmi, freeswitch, gcc-bare-metal, gdb, gerbera, + glibc, graphene, gst1-plugins-bad, gst1-plugins-good, + gstreamer1, harfbuzz, heirloom-mailx, hiredis, hplip, icu, + jemalloc, jq, kodi, lcms2, libbpf, libdill, libdrm, libenca, + libgit2, libheif, libks, libmad, libmicrohttpd, + libmodsecurity, libpthsem, libssh2, liburing, llvm-project, + lrzip, lrzsz, lua-sdl2, mesa3d, mpd, mrp, ndctl, netatalk, + netavark, odhcp6c, openblas, opencv4, opendoas, openscap, php, + podman, poppler, powerpc-utils, privoxy, python-ecdsa, + python-gymnasium, python3, qt53d, qt5webengine-chromium, + qt6base, readline, redis, rpcbind, rtl8188eu, + rtl8812au-aircrack-ng, rtl8822cs, runc, rust, rust-bin, + samba4, sane-airscan, sane-backends, sdl2_image, sqlite, + sshfs, stellarium, suricata, sway, sysrepo, tor, unzip, + ustream-ssl, util-linux, vlc, vorbis-tools, weston, + wireless-regdb, xdriver_xf86-video-nv, xen, xerces, + xserver_xorg-server, xwayland, zsh + + Removed packages: daq, kodi-pvr-hdhomerun, libhdhomerun, + libphidget, phidgetwebservice, pigpio, ptpd2, xml-security-c, + zeek + +2026.05-rc3, released May 29th, 2026 + + Fixes all over the tree. + + Updated/fixed packages: kexec, libde265, libheif, + llvm-project, mariadb, mesa3d, mpd, nginx, putty, + python-urllib3, radvd, samba4, unbound + +2026.05-rc2, released May 21th, 2026 + + Fixes all over the tree. + + Updated/fixed packages: bind, cog, exim, fwts, gnupg2, + haveged, htop, imagemagick, intel-microcode, libabseil-cpp, + libargon2, libblockdev, libde265, libgphoto2, libheif, libks, + libmodsecurity, libnfs, libnss, liburiparser, libvncserver, + memcached, mongoose, mpd, openvmtools, postgresql, + python-cbor2, python-google-api-core, + python-sdbus-modemmanager, rsync, samba4, sed, + shadowsocks-libev, supertux, tzdata, weston, wireshark, + wpewebkit, zic, zlib-ng + +2026.05-rc1, released May 12th, 2026 + + Fixes all over the tree and new features. + + Architecture: + - ARM Neoverse-V1/V2/V3/V3AE cores added + - Default x86 CPU variant is now i686 (from i586) + + Toolchain: + - Support for Linux 7.0.x headers + - ARM external toolchains bumped to 15.2.rel1 + + Filesystem: + - Support for XFS rootfs generation. + + Misc: + - generate-cyclonedx now adds source attribute to known + CVEs for better compatibility with Dependency-Track. + + New defconfigs: AMD Versal VPK120, TI j721e starter kit (TDA4VM-SK) + + New packages: cxxopts, drm-info, ftxui, go-bootstrap-stage5, + iniparser, libnss-ato, libzippp, ndctl, opendoas, + python-cloudpickle, python-deprecation, + python-farama-notifications, python-gymnasium, + python-humanfriendly, python-isodate, python-transitions, + sbctl, ugetty, zix + + Removed packages: cegui, openswan, pcre, rubix, snort, + spinxbase + +2026.02.3, released June 16, 2026 + + Important / security related fixes: + + asterisk: GHSA-8fj4-fv9f-hjpc, GHSA-g88q-c2hm-q7p7, + GHSA-j29p-pvh2-pvqp, GHSA-x5pq-qrp4-fmrj + bind: CVE-2026-3039, CVE-2026-3592, CVE-2026-5946, CVE-2026-5950 + capnproto: CVE-2026-322, CVE-2026-32239, CVE-2026-32240 + cups-filters: CVE-2025-64524 + dnsmasq: CVE-2026-2291, CVE-2026-4890, CVE-2026-4891, CVE-2026-4892, + CVE-2026-4893, CVE-2026-5172 + docker-engine: CVE-2025-54388 + dropbear: CVE-2019-6111, CVE-2026-35385 + exim: (no CVE assigned), CVE-2026-48840 + expat: CVE-2026-45186 + freeipmi: CVE-2026-50031 + glibc: CVE-2026-4046, CVE-2026-4437, CVE-2026-4438, CVE-2026-5450, + CVE-2026-5928 + gnupg2: (no CVE assigned) + haveged: CVE-2026-41054 + imagemagick: CVE-2026-42326, CVE-2026-45031, CVE-2026-45358, + CVE-2026-45359, CVE-2026-45624, CVE-2026-45664, CVE-2026-46520, + CVE-2026-46521, CVE-2026-46522, CVE-2026-46523, CVE-2026-46557, + CVE-2026-46559 + intel-microcode: CVE-2025-35979 + libde265: CVE-2026-45382, CVE-2026-45383, GHSA-ccfw-29x7-rrx3, + GHSA-j2qq-x2xq-g9wr + libgpg-error: T8239 + libheif: CVE-2026-32738, CVE-2026-32739, CVE-2026-32740, + CVE-2026-32741, CVE-2026-32814, CVE-2026-32882, CVE-2026-3949, + CVE-2026-41069, CVE-2026-41071, CVE-2026-47178, CVE-2026-47247, + CVE-2026-47251, CVE-2026-47254, CVE-2026-47709, CVE-2026-47714, + GHSA-5hqq-636x-r3cr, GHSA-6x5f-qchq-cxqv, GHSA-jvmp-j3cw-84mh, + GHSA-r7qj-cg5r-r6vf + libmad: CVE-2017-837, CVE-2017-8372, CVE-2017-8373, CVE-2017-8374 + libmodsecurity: CVE-2026-30923, CVE-2026-42268 + libssh2: CVE-2026-7598 + liburiparser: CVE-2026-44927, CVE-2026-44928 + libusb: CVE-2026-23679, CVE-2026-47104 + libvncserver: CVE-2026-3285, CVE-2026-32853, CVE-2026-32854 + mariadb: CVE-2026-34303, CVE-2026-3494, CVE-2026-44168, CVE-2026-44169, + CVE-2026-44170, CVE-2026-44171, CVE-2026-44172, CVE-2026-44173 + memcached: (no CVE assigned) + nginx: CVE-2026-40460, CVE-2026-40701, CVE-2026-42926, CVE-2026-42934, + CVE-2026-42945, CVE-2026-42946, CVE-2026-9256 + php: CVE-2026-44927, CVE-2026-44928 + postgresql: CVE-2026-6472, CVE-2026-6473, CVE-2026-6474, CVE-2026-6475, + CVE-2026-6476, CVE-2026-6477, CVE-2026-6478, CVE-2026-6479, + CVE-2026-6575, CVE-2026-6637, CVE-2026-6638 + privoxy: OVE-20260515-0001, OVE-20260515-0002 + putty: (no CVE assigned) + python-urllib3: CVE-2026-44431, CVE-2026-44432 + python3: CVE-2026-3276, CVE-2026-7774, CVE-2026-8328, gh-146211, + gh-146333, gh-148169, gh-148178, gh-148395, gh-149017, gh-149254, + gh-90309 + radvd: CVE-2026-48715 + rsync: CVE-2026-29518, CVE-2026-43617, CVE-2026-43618, CVE-2026-43619, + CVE-2026-43620, CVE-2026-45232 + runc: CVE-2025-31133, CVE-2025-52565, CVE-2025-52881 + samba4: CVE-2026-1933, CVE-2026-2340, CVE-2026-3012, CVE-2026-3238, + CVE-2026-4408, CVE-2026-4480 + sdl2_image: CVE-2026-35444 + sed: CVE-2026-5958 + sshfs: CVE-2026-47187, CVE-2026-48711 + tor: TROVE-2026-013, TROVE-2026-014, TROVE-2026-015, TROVE-2026-016, + TROVE-2026-017, TROVE-2026-018, TROVE-2026-019, TROVE-2026-020, + TROVE-2026-021, TROVE-2026-022 + unbound: CVE-2026-32792, CVE-2026-33278, CVE-2026-40622, + CVE-2026-41292, CVE-2026-42534, CVE-2026-42923, CVE-2026-42944, + CVE-2026-42959, CVE-2026-42960, CVE-2026-44390, CVE-2026-44608 + unzip: CVE-2021-4217 + xserver_xorg-server: (no CVE assigned) + xwayland: (no CVE assigned) + + Toolchain: + + - linux-headers: bump to 5.10.257, 5.15.208, 6.1.174, 6.6.141, 6.12.91, + 6.18.33 + + Infrastructure updates/fixes: + + - cve-check: fix vulnerabilities with different analysis + - generate-cyclonedx: add hashes from .hash files to externalReferences + - generate-cyclonedx: hint at missing Buildroot host package on a + specific error + - bump-stable-kernel-versions: update for split hash file + - kconfig: fix compiler warnings + - cve-check: add indication how to run + - Remove /usr/share/info/dir from target + - generate-cyclonedx: remove indirect dependencies from root component + - replicate IGNORE_CVES to host packages + - cve-check: remove 'bom-ref' for vulnerabilities + - generate-cyclonedx: generate externalReferences with + source-distribution + - cve-check: fix vulnerability timestamp to RFC 3339 + - generate-cyclonedx: generate vcs externalReferences for source repos + - gitlab-ci: use larger shared runners where necessary + - add 'make show-info-all' + - dependencies.sh: reject buggy uutils "install" on Ubuntu 26.04 + + Updated defconfigs: arcturus_ucp1020, at91sam9x5ek* + + Updated / fixed packages: kexec, zsh, cups-filters, python-cbor2, + haveged, lrzsz, ustream-ssl, expat, xwayland, libvncserver, liburing, + sysrepo, qt53d, collectd, mariadb, gstreamer1, jemalloc, libks, + lua-sdl2, util-linux, vlc, xfsprogs, kodi, bind, libde265, + docker-cli, libabseil-cpp, wpewebkit, libpthsem, heirloom-mailx, icu, + libheif, podman, unbound, dropbear, vorbis-tools, crucible, unzip, + libssh2, python3, imagemagick, libbpf, gdb, capnproto, esp-hosted, + freeipmi, asterisk, wireless-regdb, intel-microcode, weston, + util-linux-libs, linux-headers, qt6base, zlib-ng, libgphoto2, hplip, + bpftrace, postgresql, babeld, sed, libdrm, lrzip, odhcp6c, linux, + efl, libusb, jq, sane-airscan, libmad, faad2, dnsmasq, privoxy, + libgit2, mrp, putty, sshfs, gcc-bare-metal, graphene, mongoose, + rsync, redis, hiredis, cairo, zic, dos2unix, libargon2, + docker-engine, sane-backends, arm-trusted-firmware, libnss, openscap, + opencv4, liburiparser, libdill, radvd, poppler, tzdata, + gst1-plugins-bad, python-ecdsa, php, stellarium, python-aiodns, + nginx, gnupg2, tor, xerces, gst1-plugins-good, libmodsecurity, + sdl2_image, readline, libgpg-error, samba4, runc, + xserver_xorg-server, glibc, memcached, libmicrohttpd, supertux, exim, + python-urllib3, qt5webengine-chromium + +2026.02.2, released May 20, 2026 + + Changes with potentially large impact: + + - ficl was downgraded to version 3.065 because ficl4 is no longer + maintained. + + Important / security related fixes: + + apache: CVE-2026-23918, CVE-2026-24072, CVE-2026-28780, CVE-2026-29168, + CVE-2026-29169, CVE-2026-33006, CVE-2026-33007, CVE-2026-33523, + CVE-2026-33857, CVE-2026-34032, CVE-2026-34059 + bubblewrap: CVE-2026-41163 + cups: CVE-2026-27447, CVE-2026-34978, CVE-2026-34979, CVE-2026-34980, + CVE-2026-34990, CVE-2026-39314, CVE-2026-39316, CVE-2026-41079 + dash: CVE-2026-31323 + dropbear: CVE-2019-6111, CVE-2026-35385 + exim: CVE-2026-40684, CVE-2026-40685, CVE-2026-40686, CVE-2026-40687 + expat: CVE-2026-7210, CVE-2026-41080 + ffmpeg: CVE-2026-30997 + ghostscript: (no CVE assigned) + gnutls: CVE-2026-33845, CVE-2026-33846, CVE-2026-3832, CVE-2026-3833, + CVE-2026-42009, CVE-2026-42010, CVE-2026-42011, CVE-2026-42012, + CVE-2026-42013, CVE-2026-42014, CVE-2026-42015, CVE-2026-5260, + CVE-2026-5419 + go: CVE-2026-33811, CVE-2026-33814, CVE-2026-39817, CVE-2026-39819, + CVE-2026-39820, CVE-2026-39823, CVE-2026-39825, CVE-2026-39826, + CVE-2026-39836, CVE-2026-42499, CVE-2026-42501 + go-bootstrap-stage5: CVE-2026-33811, CVE-2026-33814, CVE-2026-39817, + CVE-2026-39819, CVE-2026-39820, CVE-2026-39823, CVE-2026-39825, + CVE-2026-39826, CVE-2026-39836, CVE-2026-42499, CVE-2026-42501 + imagemagick: CVE-2026-28493, CVE-2026-28494, CVE-2026-28686, + CVE-2026-28687, CVE-2026-28688, CVE-2026-28689, CVE-2026-28690, + CVE-2026-28691, CVE-2026-28692, CVE-2026-28693, CVE-2026-30883, + CVE-2026-30929, CVE-2026-30931, CVE-2026-30935, CVE-2026-30936, + CVE-2026-30937, CVE-2026-31853, CVE-2026-32259, CVE-2026-32636, + CVE-2026-33535, CVE-2026-33536, CVE-2026-33899, CVE-2026-33900, + CVE-2026-33901, CVE-2026-33902, CVE-2026-33905, CVE-2026-33908, + CVE-2026-34238, CVE-2026-40169, CVE-2026-40183, CVE-2026-40310, + CVE-2026-40311, CVE-2026-40312 + lcms2: CVE-2026-41254 + libarchive: (no CVE assigned) + libcurl: CVE-2026-7168, CVE-2026-7009, CVE-2026-6429, CVE-2026-6276, + CVE-2026-6253, CVE-2026-5773, CVE-2026-5545, CVE-2026-4873 + libexif: CVE-2026-40386, CVE-2026-40385, CVE-2026-32775 + libjxl: CVE-2025-12474, CVE-2026-1837 + libmicrohttpd: (no CVE assigned) + libpcap: CVE-2025-11961 + libpjsip: CVE-2025-65102, CVE-2026-25994, CVE-2026-26203, + CVE-2026-26967, CVE-2026-29068, CVE-2026-28799, CVE-2026-32942, + CVE-2026-32945, CVE-2026-33069, CVE-2026-34235, CVE-2026-40614, + CVE-2026-40892, CVE-2026-41416, CVE-2026-41415, CVE-2026-42225 + libsodium: (no CVE assigned) + libspdm: GHSA-m4wc-xmvg-369f, GHSA-j54w-759w-xj3m + liburiparser: CVE-2026-42371 + libxml2: CVE-2026-6732 + linux-pam: CVE-2025-6020 + log4cxx: CVE-2025-54812, CVE-2025-54813, CVE-2026-40023 + mbedtls: CVE-2025-66442, CVE-2026-25833, CVE-2026-25834, + CVE-2026-25835, CVE-2026-34871, CVE-2026-34872, CVE-2026-34873, + CVE-2026-34874, CVE-2026-34875, CVE-2026-34876, CVE-2026-34877 + musl: CVE-2026-6042, CVE-2026-40200 + nginx: CVE-2026-27654, CVE-2026-27784, CVE-2026-32647, CVE-2026-27651, + CVE-2026-28753, CVE-2026-28755 + opensc: CVE-2025-13763, CVE-2025-49010, CVE-2025-66215, CVE-2025-66038, + CVE-2025-66037 + openvpn: CVE-2026-40215, CVE-2026-35058 + p11-kit: CVE-2026-2100 + p7zip: CVE-2021-3520 + php: CVE-2026-7263, CVE-2026-6735, CVE-2026-29078, CVE-2026-29079, + CVE-2026-7259, CVE-2026-6104, CVE-2025-14179, CVE-2026-6722, + CVE-2026-7261, CVE-2026-7262, CVE-2026-7568, CVE-2026-7258, + CVE-2026-42371 + proftpd: CVE-2026-42167 + python-cbor2: CVE-2026-26209 + python-django: CVE-2026-5766, CVE-2026-35192, CVE-2026-6907, + CVE-2026-3902, CVE-2026-4277, CVE-2026-4292, CVE-2026-33033, + CVE-2026-33034 + python-lmdb: CVE-2019-16224, CVE-2019-16225, CVE-2019-16226, + CVE-2019-16227, CVE-2019-16228 + python-magic-wormhole: CVE-2026-32116 + python-pyasn1: CVE-2026-30922 + python-pyopenssl: CVE-2026-40475, CVE-2026-27459, CVE-2026-27448 + python-requests: CVE-2026-25645 + rsync: (no CVE assigned) + ruby: CVE-2026-41316 + squid: CVE-2026-32748, CVE-2026-33515, CVE-2026-33526 + strongswan: CVE-2026-25075 + systemd: CVE-2026-29111, CVE-2026-40226 + thrift: CVE-2025-48431, CVE-2026-41602, CVE-2026-41603, CVE-2026-41604, + CVE-2026-41605, CVE-2026-41606, CVE-2026-41607, CVE-2026-41636, + CVE-2026-43868, CVE-2026-43869, CVE-2026-43870 + tor: CVE-2026-44597, CVE-2026-44599, CVE-2026-44600, CVE-2026-44601, + CVE-2026-44602, CVE-2026-44603 + util-linux: CVE-2026-27456 + webkitgtk: CVE-2026-20643, CVE-2026-20664, CVE-2026-20665, + CVE-2026-20691, CVE-2026-28857, CVE-2026-28859, CVE-2026-28861, + CVE-2026-28871, CVE-2025-43457, CVE-2025-46299, CVE-2026-20608, + CVE-2026-20635, CVE-2026-20636, CVE-2026-20644, CVE-2026-20652, + CVE-2026-20676 + wireshark: CVE-2026-5409, CVE-2026-5408, CVE-2026-5406, CVE-2026-5407, + CVE-2026-5299, CVE-2026-5401, CVE-2026-5404, CVE-2026-5403, + CVE-2026-5405, CVE-2026-5654, CVE-2026-5657, CVE-2026-5656, + CVE-2026-5653, CVE-2026-6538, CVE-2026-6537, CVE-2026-6535, + CVE-2026-6534, CVE-2026-6533, CVE-2026-6532, CVE-2026-6531, + CVE-2026-6530, CVE-2026-6529, CVE-2026-6527, CVE-2026-6524, + CVE-2026-6523, CVE-2026-6521, CVE-2026-6520, CVE-2026-6519, + CVE-2026-6522, CVE-2026-6870, CVE-2026-6869, CVE-2026-6868 + wolfssl: CVE-2026-5264, CVE-2026-5263, CVE-2026-5295, CVE-2026-5466, + CVE-2026-5477, CVE-2026-5447, CVE-2026-5500, CVE-2026-5501, + CVE-2026-5503, CVE-2026-5187, CVE-2026-5188, CVE-2026-5448, + CVE-2026-5772, CVE-2026-5778, CVE-2026-3548, CVE-2026-3549, + CVE-2026-3547, CVE-2026-0819, CVE-2026-1005, CVE-2026-2645, + CVE-2026-3230, CVE-2025-12888, CVE-2025-11936, CVE-2025-11935, + CVE-2025-11934, CVE-2025-11933, CVE-2025-11931, CVE-2025-11932, + CVE-2025-12889, CVE-2025-13912, CVE-2025-7395, CVE-2025-7394, + CVE-2025-7396 + wolftpm: CVE-2025-7844 + xdg-dbus-proxy: (no CVE assigned) + xlib_libXpm: CVE-2026-4367 + xserver_xorg-server: CVE-2026-33999, CVE-2026-34000, CVE-2026-34001, + CVE-2026-34002, CVE-2026-34003 + xwayland: CVE-2026-33999, CVE-2026-34000, CVE-2026-34001, + CVE-2026-34002, CVE-2026-34003 + + Toolchain: + + - gcc: fix GCC 13, 14 and 15 build with host GCC 16 + - linux-headers: bump to 5.10.256, 5.15.207, 6.1.173, 6.6.140, 6.12.90, + 6.18.32, 6.19.14 + + Infrastructure updates/fixes: + + - Various improvements to pkg-stats. + + Updated / fixed packages: apache, bat, btrfs-progs, bubblewrap, + c-icap, ca-certificates, cups, dash, dropbear, eudev, exim, expat, + ffmpeg, ficl, frr, gcc, ghostscript, gnutls, go, go-bootstrap-stage5, + haproxy, imagemagick, kmod, lcms2, libarchive, libcurl, libexif, + libjxl, libmicrohttpd, libpcap, libpjsip, libpng, libsodium, libspdm, + liburiparser, libxml2, linux, linux-headers, linux-pam, log4cxx, + make, mbedtls, mkpasswd, musl, mutt, neon, netsnmp, network-manager, + nginx, opensc, openssh, openvpn, p11-kit, p7zip, php, proftpd, + python-cbor2, python-certifi, python-django, python-lmdb, + python-magic-wormhole, python-pyasn1, python-pyopenssl, + python-requests, python3, rsync, ruby, squid, strongswan, sudo, + systemd, thrift, tor, util-linux, watchdogd, webkitgtk, + wireless-regdb, wireshark, wolfssl, wolftpm, xdg-dbus-proxy, + xlib_libXpm, xserver_xorg-server, xwayland + +2026.02.1, released April 21, 2026 + + Changes with potentially large impact: + + - openssl was updated to 3.5.0 which has a few incompatible changes. + See https://github.com/openssl/openssl/releases/tag/openssl-3.5.0 + + Important / security related fixes: + + asterisk: CVE-2026-23739, CVE-2026-23741, CVE-2026-23738, + CVE-2026-23740 + bind: CVE-2026-1519 + clamav: CVE-2026-20031 + cpp-httplib: CVE-2026-21428, CVE-2026-22776, CVE-2026-28434, + CVE-2026-28435, CVE-2026-29076, CVE-2026-31870, CVE-2026-32627, + CVE-2026-33745, CVE-2026-34441 + exiv2: CVE-2026-25884, CVE-2026-27596, CVE-2026-27631 + expat: CVE-2026-32776, CVE-2026-32777, CVE-2026-32778 + freetype: [No CVE tracking], CVE-2026-23865 + giflib: CVE-2021-40633, CVE-2025-31344 + go: CVE-2026-32289, CVE-2026-33810, CVE-2026-27144, CVE-2026-27143, + CVE-2026-32288, CVE-2026-32283, CVE-2026-27140, CVE-2026-32280, + CVE-2026-32281 + libarchive: [No CVE tracking] + libcap: CVE-2026-4878 + libcurl: CVE-2026-3805, CVE-2026-3784, CVE-2026-3783, CVE-2026-1965 + libde265: CVE-2026-33164, CVE-2026-33165 + libglib2: CVE-2025-13601, CVE-2026-1484, CVE-2026-1485, CVE-2026-1489 + libgpiod2: [No CVE tracking] + libinput: CVE-2026-35093, CVE-2026-35094 + libmicrohttpd: CVE-2025-59777, CVE-2025-62689 + libopenssl: CVE-2026-31790, CVE-2026-28386, CVE-2026-28387, + CVE-2026-28388, CVE-2026-28389, CVE-2026-28390, CVE-2026-31789 + libpng: CVE-2026-33416, CVE-2026-33636, CVE-2026-34757 + libsoup3: CVE-2025-14523 + libtpms: CVE-2026-21444 + libxml2: CVE-2026-1757, CVE-2026-0990, CVE-2026-0992, CVE-2025-10911, + CVE-2026-0989 + musl: CVE-2025-26519 + nfs-utils: CVE-2025-12801 + nghttp2: CVE-2026-27135 + perl: CVE-2026-4176 + python-django: CVE-2026-25673, CVE-2026-25674 + python-flask: CVE-2026-27205 + python-gpiod: [No CVE tracking] + python-pyasn1: CVE-2026-23490 + python-pyjwt: CVE-2026-32597 + python-wheel: CVE-2026-24049 + python3: CVE-2026-4224, CVE-2026-3644, CVE-2026-2297 + quickjs: CVE-2025-62490, CVE-2025-62491, CVE-2025-62492, + CVE-2025-62493, CVE-2025-62494, CVE-2025-62495, CVE-2025-62496 + rauc: CVE-2026-34155 + redis: [No CVE tracking] + tor: TROVE-2026-003, TROVE-2026-004 + wireshark: CVE-2026-3201, CVE-2026-3203 + xz: CVE-2026-34743 + + Toolchain: + + - linux-headers: bump to 6.19.12, 6.18.22, 6.12.81, 6.6.134, 6.1.168, + 5.15.202, 5.10.252 + - uclibc: bump to 1.0.57 + + Infrastructure updates/fixes: + + - cve-check: fix CVE URL format + - generate-cyclonedx: add source attribute with NVD reference for CVEs + - Add SECURITY.md + - Fix error handling in br2-external + - New runtime test for memcached + - Remove 32-bit EFI from runtime tests + - New runtime test for connman + - Added support for "secondary" target that are less often tested in + autobuilders + - Update kernel and toolchain for some tests + + Updated defconfigs: aarch64_efi, nitrogen*, stm32mp135f_dk, + versal2_vek385 + + Updated / fixed packages: asterisk, bind, bind, bootgen, clamav, cpp- + httplib, cpp-httplib, docker, edk2, exiv2, expat, faketime, freeradius- + server, freetype, freetype, giflib, giflib, go, igh-ethercat, jasper, + kodi, leafnode2, libarchive, libcap, libcurl, libde265, libftdi1, + libglib2, libgpiod2, libgpiod2, libheif, libinput, libmicrohttpd, + libopenssl, libpng, libpng, libsoup3, libtpms, libtpms, libvips, + libxml2, linux, linux-headers, ltp-testsuite, luvi, mesa3d, mpd, musl, + nfs-utils, nfs-utils, nghttp2, perl, php, postgresql, python-django, + python-flask, python-gpiod, python-pyasn1, python-pyjwt, python-tornado, + python-wheel, python3, python3, quickjs, rauc, redis, sqlite, sway, tor, + uboot, uclibc, wireshark, wpebackend-fdo, xen, xz, xz, zfs + +2026.02, released March 4th, 2026 + + Various fixes. + + Updated/fixed packages: freerdp, graphicsmagick, ruby, nsquid, + vim + +2026.02-rc3, released March 2nd, 2026 + + Fixes all over the tree. + + support/testing/run-tests: Work around a node2 patch in Debian + testing/unstable: + https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1129350 + + Updated/fixed packages: bind, botan, containerd, cups, gpsd, + flashbench, igmpproxy, imagemagick, libssh, libunistring, + libvirt, mesa3d, mupdf, openscap, patch, poco, + python-multipart, rtl_433, safeclib, samba4, tinyproxy, + udisks, webkitgtk, wireshark, wlroots, wpewebkit + +2026.02-rc2, released February 24th, 2026 + + Fixes all over the tree. + + Updated/fixed packages: bind, c-ares, libzlib, mpir, netsnmp, + python-anyio, python-fastapi, python-jsonschema, + python-pybind, python-starlette, qemu, ruby, snort, systemd, + wmctrl, wpewebkit + +2026.02-rc1, released February 17th, 2026 + + Fixes all over the tree and new features. + + Arch: + - Add HPPA architecture support + - Drop ARC big-endian support + + Toolchain: + - Kernel headers: use 6.19.x by default, removed 6.17.x, added + 6.19.x support. + + - Binutils: use 2.44 by default, removed 2.42.x, added 2.45.x series. + + Misc: + - Various tweaks to utils/generate-cyclonedx for better SBOM + compatibility and more detailed annotations for CVEs fixed + by patches in Buildroot. + + New defconfigs: AMD Versal2 VEK385, HP-9000, QEMU HPPA B160L, + STM32h747i-disco + + Removed defconfigs: Raspberrypi3 qt5we + + New packages: adsp-ldr, aichat, k3conf, kibi, libplacebo, + libxmlsec1, libyang-cpp, nqptp, openscap, + python-annotated-doc, python-base58, python-coherent-licensed, + python-diskcache, python-gpiod, + python-ipython-pygments-lexers, python-librt, + python-markdown-it-py, python-mdit-py-plugins, python-mdurl, + python-memray, python-platformdirs, python-rich, + python-sdbus-systemd, python-textual, python-varlink, + qoriq-restool, rasdaemon, sigsum-go, sysrepo-cpp, yq, zellij + + Removed packages: alure, bootstrap, chartjs, connman-gtk, + cppdb, criu, cvs, datatables-buttons, datatables-fixedcolumns, + datatables-responsive, datatables, dbus-triggerd, dmraid, + dvdrw-tools, explorercanvas, flot, forge, gconf, hawktracer, + jquery-datetimepicker, jquery-keyboard, jquery-mobile, + jquery-sidebar, jquery-sparkline, jquery-ui-themes, jquery-ui, + jquery-validation, jquery, jsmin, json-javascript, jszip, + let-me-create, libcgi, libcuefile, libfreeimage, libiqrf, + libmhash, libnids, libsvg-cairo, libsvg, libuwsc, lockdev, + musepack, opencv3, openlayers, openpowerlink, opentracing-cpp, + php-zmq, python-aioredis, qjson, racehound, rpi-userland, + sconeserver, softether, taskd, vis-network, vuejs-router, + vuejs, xdriver_xf86-input-mouse + + Issues resolved: + - GNU GRUB (BIOS) with f2fs filesystem failed + https://gitlab.com/buildroot.org/buildroot/-/issues/61 + + - The shadow package does not correctly configure the ENCRYPT_METHOD.. + https://gitlab.com/buildroot.org/buildroot/-/issues/134 + + - EGL not found when building libWPE from buildroot base folder + https://gitlab.com/buildroot.org/buildroot/-/issues/144 + + - Awkward error message: "Fix you path" + https://gitlab.com/buildroot.org/buildroot/-/issues/151 + + - Detected presence of version control tool artifacts + https://gitlab.com/buildroot.org/buildroot/-/issues/154 + + - run-tests tool broken with Python 3.14 + https://gitlab.com/buildroot.org/buildroot/-/issues/156 + + - Moving away from bminor Github mirrors + https://gitlab.com/buildroot.org/buildroot/-/issues/160 + + - How can I make the 'en_US' locale by default? + https://gitlab.com/buildroot.org/buildroot/-/issues/161 + +2025.11.3, released March 17, 2026 + + Important / security related fixes: + + botan: CVE-2024-50382, CVE-2024-50383 + c-ares: CVE-2025-62408 + clamav: CVE-2026-20031 + containerd: CVE-2024-25621, CVE-2024-40635, CVE-2025-47291, + CVE-2025-64329 + cups: CVE-2025-58436, CVE-2025-61915 + exiv2: CVE-2026-25884, CVE-2026-27596, CVE-2026-27631 + fluidsynth: CVE-2025-56225 + freerdp: CVE-2024-32661, CVE-2026-23530, CVE-2026-23531, + CVE-2026-23532, CVE-2026-23533, CVE-2026-23534, CVE-2026-23948, + CVE-2026-24675, CVE-2026-24676, CVE-2026-24679, CVE-2026-24681, + CVE-2026-24682, CVE-2026-24683 + freetype: CVE-2026-23865 + graphicsmagick, CVE-2025-27796 + igmpproxy: CVE-2025-50681 + imagemagick: CVE-2026-22770, CVE-2026-23874, CVE-2026-23876, + CVE-2026-24481, CVE-2026-25638, CVE-2026-25794, CVE-2026-25795, + CVE-2026-25796, CVE-2026-25798, CVE-2026-25799, CVE-2026-25897, + CVE-2026-25989, CVE-2026-26066, CVE-2026-26283, CVE-2026-26284, + CVE-2026-26983 + jasper: CVE-2025-8836, CVE-2025-8837 + libsoup3: CVE-2025-14523 + libssh: CVE-2025-14821, CVE-2026-0964, CVE-2026-0965, CVE-2026-0966, + CVE-2026-0967, CVE-2026-0968 + libtpms: CVE-2026-21444 + mupdf: CVE-2026-25556 + netsnmp: CVE-2025-68615 + patch: CVE-2018-6952, CVE-2019-20633 + postgresql: CVE-2026-2003, CVE-2026-2004, CVE-2026-2005, CVE-2026-2006 + python-multipart: CVE-2026-24486 + rtl_433: CVE-2025-34450 + squid: CVE-2025-62168 + tinyproxy: CVE-2025-63938 + vim: CVE-2026-25749, CVE-2026-26269 + wpewebkit: CVE-2025-31273, CVE-2025-31278, CVE-2025-43211, + CVE-2025-43212, CVE-2025-43216, CVE-2025-43227, CVE-2025-43228, + CVE-2025-43240, CVE-2025-43265, CVE-2025-43272, CVE-2025-43342, + CVE-2025-43343, CVE-2025-43356, CVE-2025-43368, CVE-2025-6558 + + Infrastructure updates/fixes: + + linux: make license option visible for _CUSTOM_VERSION as well + support/testing/run-tests: fix Debian testing/unstable + + Updated / fixed packages: botan, c-ares, clamav, containerd, cups, + docker, dtc, exiv2, faketime, flashbench, freerdp, freetype, + graphicsmagick, igmpproxy, imagemagick, jasper, libsoup3, libssh, + libtpms, libvips, libvirt, libzlib, mpir, mupdf, netsnmp, patch, poco, + postgresql, python3, python-multipart, qemu, rtl_433, samba4, snort, + squid, tinyproxy, util-linux, vim, webkitgtk, wireshark, wmctrl, + wpewebkit + + Removed packages: qemu (cris target), python3 (ossaudiodev) + +2025.11.2, released February 20, 2026 + + avahi: CVE-2021-3468, CVE-2023-38469, CVE-2023-38470, CVE-2023-38471, + CVE-2023-38472, CVE-2023-38473, CVE-2024-52615, CVE-2024-52616, + CVE-2025-68276, CVE-2025-68468, CVE-2025-68471, CVE-2026-24401 + bind: CVE-2025-13878 + busybox: CVE-2025-46394, CVE-2025-60876 + expat: CVE-2026-24515, CVE-2026-25210 + glibc: CVE-2025-15281, CVE-2026-0861, CVE-2026-0915 + gnutls: CVE-2025-14831, CVE-2026-1584 + go: CVE-2025-61732, CVE-2025-68121, CVE-2025-61728, CVE-2025-61726, + CVE-2025-68121, CVE-2025-61731, CVE-2025-61730 + gpsd: CVE-2025-67268, CVE-2025-67268 + haproxy: CVE-2025-11230 + intel-microcode: CVE-2024-24853, CVE-2025-31648 + libopenssl: CVE-2025-11187, CVE-2025-15467, CVE-2025-15468, + CVE-2025-66199, CVE-2025-68160, CVE-2025-69418, CVE-2025-69419, + CVE-2025-69420, CVE-2025-69421, CVE-2026-22795, CVE-2026-22796 + libpng: CVE-2026-22695, CVE-2026-22801, CVE-2026-25646 + libtasn1: CVE-2025-13151 + libvpx + linux-pam: CVE-2024-10963 + nginx: CVE-2025-53859 + nodejs: CVE-2025-27210, CVE-2025-55130, CVE-2025-55131, CVE-2025-55132, + CVE-2025-59465, CVE-2025-59466, CVE-2026-21637 + python3: gh-144125, gh-143935, gh-143925, gh-143919, gh-143916 + python-django: CVE-2025-13473, CVE-2025-14550, CVE-2026-1207, + CVE-2026-1285, CVE-2026-1287, CVE-2026-1312 + python-urllib3: CVE-2026-21441 + strongswan: CVE-2025-62291 + tor: TROVE-2025-016 + vim: CVE-2025-66476 + webkitgtk + + Infrastructure updates/fixes: + + arm-trusted-firmware, at91bootstrap3, barebox, linux, opensbi, optee-os, + uboot: Add support for custom license files + config-fragments/autobuild: drop a number of duplicated toolchains + generate-cyclonedx: fix dependencies + Makefile: add check-package-external target + pkg-stats: add -N/--needs-update option + pkg-stats: fix RuntimeError with python 3.14 asyncio + relocate-sdk.sh: pre-calculate files in need of relocation + system/Config.in: do not reference md5 for sha256 option + testing/run-tests: specify multiprocessing method + testing: fix SdbusModemmanager/SdbusNetworkmanager duplicate test name + testing: python-requests: new runtime test + testing: test_python.py: disable interpreter colors + testing: test_python_sdbus_modemmanager: remove unneeded systemd vconsole + testing/tests/package/test_firewalld: use ext2 instead of cpio + + Updated / fixed packages: aardvark-dns, asterisk, at91bootstrap3, avahi, + berkeleydb, bind, bitcoin, blake3, brltty, brotli, busybox cryptsetup, + dash, dc3dd, docker-engine, easy-rsa, efl, ell, expat, frr, glibc, + gnutls, go, gpsd, grub2, haproxy, igmpproxy, intel-microcode, + kvm-unit-tests, libcec, libbsd, libcdio-paranoia, libcurl, libgphoto2, + libgpiod2, libite, libopenssl, libpng, libtasn1, libucl, libvpx, + libwebsockets, linux, linux-headers, linux-pam, localedef, lockdev, + m4, manual, mcelog, mesa3d, mp4v2, mpg123, mpir, mupdf, netdata, + netsniff-ng, nginx, nodejs, parprouted, php, php-lua, pkg-utils, podman, + python3, python-django, python-jinja2, python-urllib3, qemu, rp-pppoe, + rust-bindgen, safeclib, samba4, sane-airscan, screen, shadow, shapelib, + spandsp, squeezelite, strongswan, swig, syslog-ng, systemd, tor, uboot, + uclibc, uftp, util-linux, vim, vsftpd, webkitgtk, wireless-regdb, + xmlstarlet, zeek + + Removed packages: criu, cvs, dbus-triggerd, dvdrw-tools, libsvg, libsvg-cairo, lockdev, gconf, + +2025.11.1, released January 20, 2026 + + Important / security related fixes: + + apache: CVE-2025-55753, CVE-2025-58098, CVE-2025-59775, CVE-2025-65082, + CVE-2025-66200 + cryptsetup + dropbear: CVE-2025-14282, CVE-2019-6111 + exim: CVE-2025-67896 + gnupg2 + imagemagick: CVE-2025-66628 + libarchive + libcoap: CVE-2025-59391, CVE-2025-65493, CVE-2025-65494 + CVE-2025-65495, CVE-2025-65496, CVE-2025-65497, CVE-2025-65498, + CVE-2025-65499, CVE-2025-65500, CVE-2025-65501 + libcurl: CVE-2025-13034, CVE-2025-14017, CVE-2025-14524, + CVE-2025-14819, CVE-2025-15079, CVE-2025-15224 + libfcgi: CVE-2025-23016. + libfreeimage: CVE-2019-12211, CVE-2019-12213, CVE-2020-24292, + CVE-2020-24293, CVE-2020-24295, CVE-2021-33367, CVE-2021-40263, + CVE-2021-40266, CVE-2023-47995, CVE-2023-47997 + libpng: CVE-2025-66293 + liburiparser: CVE-2025-67899 + libxslt: CVE-2025-7424, CVE-2025-9714, CVE-2025-11731 + linenoise: CVE-2025-9810 + perl: CVE-2025-40909 + php: CVE-2025-14177, CVE-2025-14178, CVE-2025-14180 + python-django: CVE-2025-13372, CVE-2025-64460 + python-filelock: CVE-2025-68146 + python-fonttools: CVE-2025-66034 + python-urllib3: CVE-2025-66471, CVE-2025-66418 + unbound: CVE-2025-11411 + vlc + xserver_xorg-server: CVE-2025-62229, CVE-2025-62230, + CVE-2025-62231 + xwayland: CVE-2025-62229, CVE-2025-62230, CVE-2025-62231 + + Infrastructure updates/fixes: + + - pkg-stats use HEAD request & unique HTTP user-agent + - cve-check: don't fail with unknown CVE + - generate-cyclonedx: support 'resolved_with_pedigree' + - testing: add host bin dir to PATH + - testing: add tests for FIT hash support in package/uboot-tools + - testing: add libiio python bindings runtime test + - testing: ddrescue: use dmsetup from lvm2 + - testing: ddrescue: use f-string for test config + - testing: add tio runtime test + - add 'CVE:' trailer in various patches + - add md5 hash and update tarball url to various python packages + - testing: ltp-testsuite: replace runltp by kirk + - testing: new kvmtool runtime test + - gitignore: ignore utils/brmake log output named `br.log` + - testing: add opus-tools runtime test + - testing: add flac runtime test + - testing: test_xen: add block + + Updated / fixed packages: apache, arm-trusted-firmware, atf, audit, + bitcoin, boost, busybox, cage, cmake, collectl, cppcms, cpulimit, + cryptsetup, dbus, dmraid, dropbear, efl, embiggen-disk, evilwm, exim, + ficl, fio, fluent-bit, fontconfig, glibc, gnupg2, grpc, gvfs, icu, + imagemagick, irqbalance, iwd, kvmtool, ledmon, libarchive, libcoap, + libconfig, libcpprestsdk, libcurl, libdill, libdnet, libfcgi, libfreeimage, + libgit2, libgtk3, libgtk4, libiio, libmbus, libpng, libselinux, libtirpc, + libupnp, liburiparser, libvncserver, libxslt, linenoise, linux-tools, + lttng-modules, lugaru, matchbox-fakekey, matchbox-keyboard, matchbox-lib, + matchbox-panel, mender-update-modules, mesa3d, mosh, nfs-utils, open-lldp, + opencv4, opencv4-contrib, openjdk, perl, perl-dbd-mysql, perl-mozilla-ca, + php, pigz, pixman, python-brotli, python-can, python-certifi, python-django, + python-filelock, python-fonttools, python-pyqt5, python-urllib3, python3, + qt5enginio, qt5webkit, qt6base, racehound, rdesktop, rpcbind, rpi-firmware, + rtl8192eu, rtl8723bu, rtl8723ds, rtl8821au, rtl8821cu, rtl8822cs, samba4, + skopeo, softether, softhsm2, spice, ssdp-responder, sway, tio, trinity, + tzdata, uboot, uboot-tools, uclibc, unbound, utfcpp, v4l2loopback, vim, vlc, + xdriver_xf86-video-intel, xen, xinetd, xlib_libxshmfence, + xserver_xorg-server, xvkbd, xwayland, zic, zxing-cpp + + Removed packages: opencv3 'protobuf', opencv3 'ffmpeg', + libdnet 'python', rpi-firmware 'vcdbg' + +2025.11, released December 11th, 2025 + + Fixes all over the tree. + + linux: Default to 6.18 for runtime kernel and kernel headers, + drop the now EOL 5.4.x series. + + Updated/fixed packages: apache, audit, cryptodev-linux, + dmraid, ficl, glibc, go, intel-mediadriver, intel-vpl-gpu-rt, + kbd, libcap, libdbi, libgit2, libpng, libtirpc, libxslt, + lugaru, mosh, pigz, podman, python-fonttools, python-urllib3, + python3, racehound, rdesktop, rtl8188eu, softhsm, sqlite, + strace, unbound, unzip, xapp_xkbutils, + xdriver_xf86-video-intel, xl2tp, xserver_xorg-server, xwayland + +2025.11-rc2, released November 30th, 2025 + + Fixes all over the tree. + + Infrastructure: support/scripts/check-merged (introduced in + 2025.11-rc1) no longer relies on getopt from util-linux + + Defconfigs: pine64 star: Update U-Boot and Linux kernel to fix + builds with GCC 14.x + + Updated/fixed packages: 18xx-ti-utils, depot-tools, e2fsprogs, + enscript, fio, gnutls, intel-mediadriver, intel-vpl-gpu-rt, + ledmon, libpng, libteam, lmbench, mongoose, netsnmp, + nss-pam-ldapd, open-plc-utils, oprofile, pdmenu, php-apcu, + php-pecl-dbus, php-xdebug, php-yaml, python-flask-restx, + python-pysocks, python-starlette, sane-backends, sbc, sdl, + stress-ng, swipl, syslinux, time, tmux, tor, uboot-tools, + woff2, xfsprogs, yaml-cpp + + Removed packages: libargtable2, starfive-spltool + +2025.11-rc1, released November 20th, 2025 + + Fixes all over the tree and new features. + + Infrastructure: + + - Support merged /usr/sbin/ (E.G. sbin a symlink to bin rather + than separate directories), which is required by systemd + 256+ + + - support/scripts/cve-check can now be used to enrich a SBOM + in CycloneDX format (as generated by + utils/generate-cyclonedx) with vulnerability analysis from + the NVD database. + + Dropped a number of old and unmaintained packages and external + toolchains. + + New defconfigs: Compulab IOT-GATE-iMX8 EBBR, QEMU x86-64 EFI + + Removed defconfigs: at91sam9260eknf, atmel_sama5d3xek, + roseapplepi + + New packages: broot, bvi, go-bootstrap-stage4, libpam-pkcs11, + llama-cpp, nnn, python-crccheck, python-fs, python-patch-ng, + python-pyfatfs, python-scp, python-whitenoise, snapboot, wmenu + + Removed packages: aufs, aufs-util, axfsutils, bctoolbox, + belle-sip, belr, dmenu-wayland, dvbsnoop, + ev3dev-linux-drivers, expect, fbtft, gtk2-engines, gtkperf, + leafpad, lesstif, libbson, libglade, libgtk2, libjwt, libsexy, + linphone, logsurfer, mediastreamer, metacity, mongrel2, ola, + ortp, procrank_linux, ramspeed, sylpheed + +2025.08.3, released December 11, 2025 + + Important / security related fixes: + + - asterisk: CVE-2025-1131, CVE-2025-57767, CVE-2025-49832, + CVE-2025-47780, CVE-2025-47779 + - gnutls: CVE-2025-9820 + - libpng: CVE-2025-64505, CVE-2025-64506, CVE-2025-64720, CVE-2025-65018 + - luksmeta: CVE-2025-11568 + - mariadb: CVE-2025-30693, CVE-2025-30722, CVE-2023-52969, + CVE-2023-52970, CVE-2023-52971 + - openvpn: CVE-2025-13086 + - postgresql: CVE-2025-12817, CVE-2025-12818 + - python-django: CVE-2025-64458, CVE-2025-64459 + - python-startlette: GHSA-7f5h-v6xp-fcq8 + + Infrastructure updates/fixes: + + - New script support/scripts/cve-check to enricht CycloneDX SBoM with + CVE information from NVD database. + + Updated / fixed packages: 18xx-ti-utils, asterisk, enscript, gnutls, + libpng, libroxml, libteam, linux-headers, luksmeta, mariadb, nbd, neard, + nss-pam-ldapd, open-plc-utils, openjdk, openjdk-bin, openvpn, oprofile, + pdmenu, perl-net-ssleay, postgresql, python-django, python-starlette, + redis, sane-bacends, sbc, sdbusplus, sdl, swipl, tailscale, thermald, + tmux, tor + + Removed packages: bctoolbox, belle-sip, belr, linphone, mediastreamer, + mongrel2, ortp + +2025.08.2, released November 20, 2025 + + Important / security related fixes: + + - bind: CVE-2025-8677, CVE-2025-40778, CVE-2025-40780 + - dante: CVE-2024-54662 + - erlang: CVE-2024-53846, CVE-2025-4748, CVE-2025-26618, CVE-2025-30211, + CVE-2025-32433, CVE-2025-46712, CVE-2025-48038, + CVE-2025-48039, CVE-2025-48040, CVE-2025-48041 + - hostapd: CVE-2025-24912 + - imagemagick: CVE-2025-62171 + - iptraf-ng: CVE-2024-52949 + - libarchive: CVE-2025-25724 + - libglib2: CVE-2024-54662 + - libvips: CVE-2025-29769, CVE-2025-59933 + - libvpx: CVE-2025-5283 + - libxslt: CVE-2025-24855, CVE-2024-55549 + - mbedtls: CVE-2025-54764, CVE-2025-59438 + - modsecurity2: CVE-2025-52891, CVE-2025-54571 + - netdata: CVE-2023-22496, CVE-2023-22497 + - podman: CVE-2025-9566 + - poppler: CVE-2024-6239, CVE-2024-56378, CVE-2025-32364, + CVE-2025-32365, CVE-2025-43903, CVE-2025-50420, + CVE-2025-52886 + - python3: gh-139312, gh-139700, gh-139400, gh-135661, gh-135661, + gh-102555, gh-135462, gh-118350, gh-86155 + - python-webpy: CVE-2025-3818 + - redis: CVE-2025-46817, CVE-2025-46818, CVE-2025-46819, CVE-2025-49844 + - samba: CVE-2025-3818, CVE-2025-10230 + - shairport-sync: Upstream security fixes without CVE + - squid: CVE-2025-59362 + - suricata: CVE-2024-37151, CVE-2024-38535 + - tpm2-tss: CVE-2024-29040 + - xerces: CVE-2024-23807 + - zabbix: CVE-2025-27231, CVE-2025-27236, CVE-2025-27238, CVE-2025-49641 + - zip: CVE-2018-13410 + + Infrastructure updates/fixes: + + - Improved matching of CPE ID with NVD database, resulting in more accurate + identification of CVEs. + - brmake: avoid garbled output with top-level parallel build + + Updated / fixed packages: 4th, audit, bind, cmake, crun, dante, + ebtables, erlang, freeradius-server, freerdp, gpsd, gstd, hostapd, + imagemagick, iptraf-ng, ledmon, libarchive, libcurl, libdbi-drivers, + libdisplay-info, libglib2, libgphoto2, libgtk3, libheif, libiconv, + libsemanage, libshout, libsolv, libtpms, libvips, libvpx, libwpe, + libxslt, linux, linux-headers, live555, mbedtls, micropython, + mjpg-streamer, modsecurity2, netdata, podman, poppler, python3, + python-flask-cors, python-webpy, quota, qt6multimedia, redis, refpolicy, + samba4, shairport-sync, selinux-python, sexpect, siproxd, sqlite, squid, + suricata, tor, tpm2-tss, waffle, webkitgtk, wireless-regdb, wpewebkit, + xerces, zabbix, zip + + Removed package: ramspeed + + Boards updated / fixed: andes_ae350_45, beaglebone, beagleboneai, + cubieboard1, cubieboard2, imx6ulz_bsh_smm_m2, imx8mn_bsh_smm_s2, + imx8mn_bsh_smm_s2_pro, olimex_a20_olinuxino_lime*, stm32f429_disco_xip, + stm32f746_disco_sd, stm32f769_disco_sd, stm32mp1*_dk*, ti_am62x_sk + + Test Improvements: + + - Capture output of failing commands on host. + +2025.08.1, released October 11, 2025 + + Important / security related fixes: + + - atop: CVE-2025-31160 + - civetweb: CVE-2025-55763 + - cjson: CVE-2025-57052 + - connman: CVE-2025-32366, CVE-2025-32743 + - cups: CVE-2025-58060, CVE-2025-58364 + - expat: CVE-2025-59375 + - fastd: CVE-2025-24356 + - fetchmail: CVE number pending + - ghostscript: CVE-2025-59798, CVE-2025-59799, CVE-2025-59800, + CVE-2025-59801 + - intel-microcode: CVE-2025-20053, CVE-2025-20109, CVE-2025-22839, + CVE-2025-22840, CVE-2025-22889, CVE-2025-26403 + - jasper: CVE-2023-51257, CVE-2025-8835 + - libcurl: CVE-2025-10148, CVE-2025-9086 + - libopenssl: CVE-2025-9230, CVE-2025-9231, CVE-2025-9232 + - libssh: CVE-2025-8114, CVE-2025-8277 + - lua: CVE-2014-5461 + - opencv4: CVE-2025-53644 + - pcre2: CVE-2025-58050 + - poco: CVE-2025-6375 + - postgresql: CVE-2025-8713, CVE-2025-8714, CVE-2025-8715 + - python-django: CVE-2025-57833, CVE-2025-59681, CVE-2025-59682 + - python-pip: CVE-2025-8869 + - raptor: CVE-2024-57822, CVE-2024-57823 + - syslog-ng: CVE-2024-47619 + - tiff: CVE-2024-13978, CVE-2025-8961, CVE-2025-9165 + + + Updated / fixed packages: asterisk, boinc, boot-wrapper-aarch64, c-icap, + chocolate-doom, cjson, cpp-httplib, cutekeyboard, docker-engine, fatcat, + fluent-bit, gnupg2, gnuplot, htpdate, iputils, kodi, libfreeimage, + libopenssl, libselinux, libsemanage, libxkbcommon, libxmlrpc, + linux-firmware, linuxptp, llvm, luaossl, luvi, mariadb, mdio-tools, + modsecurity2, openjpeg, pango, php-lua, policycoreutils, + python-aiohttp-session, python-certifi, python-cryptography, + python-flask-cors, python-pytz, python-trove-classifiers, + python-typing-extensions, rtl8723bu, rtl8723ds, rtl8821cu, rtl8822cs, + rtl_433, ruby, samba4, sysprof, ti-k3-boot-firmware, tiff, tor, uboot, + uclibc, upx, vulkan-headers, webkitgtk, wilc-driver, wlroots, x11r7, + xilinx-embeddedsw, xilinx-prebuilt, xlib_xtrans, xr819-xradio, zziplib + + Boards updated / fixed: beagleboneai, loongarch64-efi, qemu (all), + versal, zedboard + + Boards removed: at91sam9260eknf, atmel_sama5d3xek, roseapplepi + + Test Improvements: + + - test_docker_compose: update kernel & VM CPU + - TestZfsUclibc: use internal backend for uClibc-ng toolchain + - GitTestBase: remove git daemon due to Gitlab-CI security settings + +2025.08, released September 7th, 2025 + + Fixes all over the tree. + + Infrastructure: + + - 'make show-info' now also displays the package directory. + + - utils/bump-stable-kernel-versions helper script to bump + Linux (headers) kernel versions. + + Fixed defconfigs: QEMU ARM / Aarch64 EBBR / SBSA, Sipeed + licheepi zero, TI am62x sk + + Removed defconfigs (build failures): Bananapro, Beelink gs1, + Chromebook snow, Engicam i.MX6 boards, Galileo, Microchip + at91sam9g20df / at91sam9g45m10ek / at91sam9rlek, Odroid XU-4, + Orangepi lite2 / one+, Pcengine apu2, Pine64 rock64 / sopine, + Raxda rockpin8, Riotboard, Socrates cyclone5, Technologic + TS-7680, Toradex Apalis i.MX6 + + Updated/fixed packages: apitrace, avrdude, b43-firmware, bat, + brcm-patchram-plus, busybox, ecryptfs-utils, exiv2, ffmpeg, + firewalld, gdb, go, imagemagick, input-event-daemon, iozone, + ipmitool, jose, libcap-ng, libfreeglut, libftdi1, libgsm, + libkrb5, libsoxr, lighttpd, lirc-tools, lua-utf8, mariadb, + mbpfan, micropython, mosquitto, netavark, openal, postgis, + python-flask-cors, python-h2, python-yarl, python3, rtl8188eu, + rtl8821au, sqlite, squid, sslh, tcpreplay, timescaledb, + tstools, uclibc, udisks, unbound, vde2, + webrtc-audio-processing, wipe, wireshark, xlib_libXt + + Removed packages: libsvgtiny, netstat-nat, + netsurf-buildsystem, thttpd + 2025.08-rc3, released August 28th, 2025 Fixes all over the tree, mainly GCC 15.x build fixes @@ -64,6 +1738,162 @@ Removed packages: libebur128, libolm, libwebsock, python-dunamai, python-poetry-dynamic-versioning +2025.05.3, released October 11, 2025 + + This is the final release on the 2025.05.x branch. + + Important / security related fixes: + + - atop: CVE-2025-31160 + - civetweb: CVE-2025-55763 + - cjson: CVE-2025-57052 + - connman: CVE-2025-32366, CVE-2025-32743 + - cups: CVE-2025-58060, CVE-2025-58364 + - exiv2: CVE-2023-44398, CVE-2024-24826, CVE-2024-25112, CVE-2024-39695, + CVE-2025-26623, CVE-2025-54080, CVE-2025-55304 + - expat: CVE-2025-59375 + - fastd: CVE-2025-24356 + - fetchmail: CVE number pending + - ghostscript: CVE-2025-59798, CVE-2025-59799, CVE-2025-59800, + CVE-2025-59801 + - imagemagick: CVE-2023-5341, CVE-2025-55004, CVE-2025-55005, + CVE-2025-55160 + - intel-microcode: CVE-2025-20053, CVE-2025-20109, CVE-2025-22839, + CVE-2025-22840, CVE-2025-22889, CVE-2025-26403 + - jasper: CVE-2023-51257, CVE-2025-8835 + - libcurl: CVE-2025-10148, CVE-2025-9086 + - libopenssl: CVE-2025-9230, CVE-2025-9231, CVE-2025-9232 + - libssh: CVE-2025-8114, CVE-2025-8277 + - lua: CVE-2014-5461 + - opencv4: CVE-2025-53644 + - pcre2: CVE-2025-58050 + - poco: CVE-2025-6375 + - postgresql: CVE-2025-8713, CVE-2025-8714, CVE-2025-8715 + - python-django: CVE-2025-57833, CVE-2025-59681, CVE-2025-59682 + - python-flask-cors: CVE-2024-6839, CVE-2024-6844, CVE-2024-6866 + - python-pip: CVE-2025-8869 + - raptor: CVE-2024-57822, CVE-2024-57823 + - sqlite: CVE-2025-6965 + - syslog-ng: CVE-2024-47619 + - tiff: CVE-2024-13978, CVE-2025-8961, CVE-2025-9165 + - udisks: CVE-2025-8067 + - wireshark: CVE-2025-5601 + + Updated / fixed packages: asterisk, avrdude, boinc, boot-wrapper-aarch64, + cjson, cpp-httplib, cutekeyboard, docker-engine, ecryptfs-utils, fatcat, + fetchmail, firewalld, gnupg2, gnuplot, htpdate, iputils, jose, kodi, + libfreeimage, libopenssl, libselinux, libsemanage, libxkbcommon, + libxmlrpc, linux-firmware, linuxptp, llvm, lua-utf8, luaossl, luvi, + mariadb, mbpfan, micropython, modsecurity2, mosquitto, opencv4, openjpeg, + pango, php-lua, policycoreutils, python-aiohttp-session, python-certifi, + python-cryptography, python-flask-cors, python-pytz, python3, rtl_433, + ruby, samba4, sysprof, ti-k3-boot-firmware, tiff, tor, uclibc, upx, + webkitgtk, wlroots, x11r7, xilinx-embeddedsw, xilinx-prebuilt, zziplib + + Removed package: netstat-nat + + Boards updated / fixed: versal, ti_am62x_sk, qemu/{x86, x86_64}, + zedboard, beagleboneai + + Boards removed: roseapplepi, at91sam9260eknf, atmel_sama5d3xek + + Test Improvements: + + - TestSWIPL: increase timeout value + - TestOpenJdk: remove stime() function call + - test_hardening: update toolchain to aarch64 for checksec tests + - test_docker_compose: update kernel & VM CPU + - TestZfsUclibc: use internal backend for uClibc-ng toolchain + - GitTestBase: remove git daemon due to Gitlab-CI security settings + +2025.05.2, released September 09, 2025 + + Important / security related fixes: + + - libssh: CVE-2025-4878, CVE-2025-5318, CVE-2025-5351, CVE-2025-5372, + CVE-2025-5449, CVE-2025-5987 + - glibc: CVE-2025-5702, CVE-2025-5745, CVE-2025-8058 + - gnutls: CVE-2025-32989, CVE-2025-32988, CVE-2025-32990, CVE-2025-6395 + - python3: CVE-2025-8194 + - libhtp: CVE-2025-53537 + - tiff: CVE-2025-8176, CVE-2025-8177 + - libglib2: CVE-2025-6052 + - ofono: CVE-2023-2794, CVE-2024-7537, CVE-2024-7539, CVE-2024-7540, + CVE-2024-7541, CVE-2024-7542 + - elfutils: CVE-2025-1352, CVE-2025-1365, CVE-2025-1371, CVE-2025-1372, + CVE-2025-1376, CVE-2025-1377 + - grub2: CVE-2024-45777, CVE-2024-45778, CVE-2024-45779, + CVE-2024-45780, CVE-2024-45782, CVE-2024-56737, CVE-2024-56738, + CVE-2025-0678, CVE-2025-0684, CVE-2025-0685, CVE-2025-0686, + CVE-2025-0689, CVE-2025-1125 + - openjpeg: CVE-2025-54874 + - go: CVE-2025-4674, CVE-2025-47907 + - gst1-plugins-base: CVE-2025-47806, CVE-2025-47807 + - gst1-plugins-good: CVE-2025-47219, CVE-2025-47183 + - vorbis-tools: CVE-2023-43361 + - vim: CVE-2024-41957, CVE-2024-41965, CVE-2024-45306, CVE-2024-47814, + CVE-2025-1215, CVE-2025-22134, CVE-2025-24014, CVE-2025-26603, + CVE-2025-29768, CVE-2025-53905, CVE-2025-53906 + - ffmpeg: CVE-2023-6602 + - lighttpd: CVE-2025-8671 + - python-h2: CPE-2025-57804 + - cpp-httplib: CVE-2025-46728 + + Removed packages: liboauth, thttpd + + Removed defconfigs: at91sam9g20dfc, at91sam9g45m10ek, + at91sam9rlek, bananapro, beelink_gs1, chromebook_snow, galileo, + odroidxu4, orangepi_lite2, orangepi_one_plus, pcengines_apu2, + pine64_sopine, riotboard, rock64, rock_pi_n8, socrates_cyclone5, + toradex_apalis_imx6, ts7680, engicam_imx6*, kontron_pitx_imx8m, + imx6ulz_bsh_smm_m2, + + Test Improvements: + + - test_gstreamer1: raise tesseract-ocr timeout to 15s + - test_wine: fix test after bootlin toolchains update + - test_numactl: fix test after bootlin toolchains update + - test_dpdk: fix test after bootlin toolchains update + - test_msr_tools: fix test after bootlin toolchains update + - test_dmidecode: fix test after bootlin toolchains update + - test_iso9660: use a more recent toolchain + - test_grub: use glibc toolchain + - test_wget: replace thttpd by Busybox's httpd server + - test_libcurl: replace thttpd by Busybox's httpd server + - test_systemd_selinux: fix test after bootlin toolchains update + + Updated / fixed packages: python-propcache, pipewire, apache, xinetd, + libssh, glibc, libhtp, libapparmor, libopenssl, rpi-firmware, + brcmfmac_sdio-firmware-rpi, grout, php-pecl-dbus, tini, snooze, ngrep, + libzenoh-pico, janet, cjson, flatcc, nanocom, rtl8189es, gcc, ofono, + python-numpy, elfutils, libtracefs, tinyssh, start-stop-daemon, bcusdk, + prboom, setserial, grub2, openjpeg, go, gstreamer1, gst1-plugins-base, + gst1-plugins-good, gst1-plugins-bad, gst1-plugins-ugly, gst1-devtools, + gst1-libav, gst1-python, gst1-rtsp-server, gst1-vaapi, + gstreamer1-editing-services, vorbis-tools, jq, lbijwt, vim, ffmpeg, + libv4l, python-yarl, lirc-tools, b43-firmware, tcpreplay, libsvgtiny, + libsoxr, lighttpd, uclibc, vde2, libcap-ng, python-h2, squid, ipmitool, + ell, proftpd, liblog4c-localtime, wpewebkit, weston, cpp-httplib, + ipset, python3, python-aexpect, libftdi1 + + Infrastructure updates/fixes: + - Various tweaks to utils/generate-cyclonedx for better SBOM + compatibility and project name/version customization + - go: make pre-built compiler provide target support too + - test-pkg: add new option -T/--toolchain-name + - pkg-utils.mk: include package directory in show-info output + - bump-stable-kernel-versions: new tool + + Boards updated / fixed: + + - qemu_sh4*: switch back to disk emulation + - acmesystems_acqua_a5_*: update linux + - sipeed_licheepi_zero: update linux & uboot + - zynqmp: increase vfat partition to 64M + - qemu_{arm,aarch64}_{ebbr,sbsa}*: linux needs host python3 + - canaan_kd233, sipeed*: use BR2_LINUX_KENREL_IMAGE_TARGET_NAME + - ci20: U-Boot needs host-openssl + 2025.05.1, released August 11th, 2025 Important / security related fixes: @@ -265,6 +2095,1333 @@ - netsnmp: unexpected header length in /proc/net/snmp... https://gitlab.com/buildroot.org/buildroot/-/issues/110 +2025.02.19, released October 22, 2026 + + Changes with potentially large impact: + + - PHP had two very serious vulnerabilities: CVE-2026-109618, + CVE-2026-109619. If you use PHP, upgrading is *strongly* recommended. + + - Some trusted certificates from the eMudhra CA have known private keys. + This means that it is extremely easy to masquerade as whatever host + and public key infrastructure cannot be trusted at all. See + https://emudhra.we-have-a-problem.com/ for more information. + + The ca-certificates and python-certifi packages have been updated to + remove the root certificate that signs the vulnerable intermediate + certificates. If you use ca-certificates to validate TLS connections, + upgrading is *strongly* recommended. + + Note that some packages bundle their own set of root certificates, + including libnss, nodejs, and dozens of Go and Rust packages. These + have *not* been updated in this release. + + - BR2_DOWNLOAD_FORCE_CHECK_HASHES=y is supposed to make the build fail + if any download cannot be successfully verified against a known + hash. It did not do that if there is no hash file at all. + + - Wireshark was bumped from 4.2 to 4.4, which may have + incompatibilities. + + Important / security related fixes: + + apache: CVE-2026-42356, CVE-2026-42528, CVE-2026-46729, CVE-2026-47360, + CVE-2026-48005, CVE-2026-56153, CVE-2026-56154, CVE-2026-56449, + CVE-2026-57941, CVE-2026-58415, CVE-2026-59685, CVE-2026-59797, + CVE-2026-63045, CVE-2026-63292, CVE-2026-63686, CVE-2026-63718, + CVE-2026-73636, CVE-2026-73637, CVE-2026-79768, CVE-2026-93546 + bind: CVE-2026-19033, CVE-2026-19662, CVE-2026-19666, CVE-2026-19667, + CVE-2026-19668, CVE-2026-19941, CVE-2026-75029, CVE-2026-76163, + CVE-2026-77119, CVE-2026-77692, CVE-2026-78301, CVE-2026-80274, + CVE-2026-81563, CVE-2026-81736 + bubblewrap: CVE-2026-87766 + ca-certificates: (no CVE assigned) + cannelloni: CVE-2026-37539 + expat: CVE-2026-102633, CVE-2026-77214, CVE-2026-93990 + gawk: CVE-2023-4156 + gcc-initial: CVE-2019-15847 + ghostscript: (no CVE assigned) + glibc: CVE-2026-8674, CVE-2026-89092, CVE-2026-97399 + go: CVE-2026-56857, CVE-2026-56866, CVE-2026-78659, CVE-2026-78660, + CVE-2026-78663, CVE-2026-78667, CVE-2026-78669, CVE-2026-94439, + CVE-2026-94440, CVE-2026-94444, CVE-2026-94447, CVE-2026-94448, + CVE-2026-97030, CVE-2026-97031, CVE-2026-97032 + gpsd: CVE-2026-58459 + htop: CVE-2008-5076 + kbd: CVE-2011-0460 + libheif: GHSA-4rv4-953r-p24q, GHSA-9c75-9g8r-4728, GHSA-fqpw-fj22-78w4, + GHSA-prgh-72vc-3xmc, GHSA-q492-cfcm-895h, GHSA-qwpf-5wf7-r996, + GHSA-r7gr-2xm2-23wf, GHSA-rhgw-q5g8-xjh2, GHSA-v8qw-hwjv-44hw, + GHSA-vg7w-rp49-4fc2, GHSA-xrp2-63fq-jm8q + libopenssl: CVE-2026-35189, CVE-2026-35191, CVE-2026-42772, + CVE-2026-54872, CVE-2026-54873, CVE-2026-54875, CVE-2026-72897, + CVE-2026-75804, CVE-2026-75805, CVE-2026-75806, CVE-2026-77696, + CVE-2026-84782, CVE-2026-84784 + libpcap: CVE-2026-0799, CVE-2026-18238, CVE-2026-18313, CVE-2026-31911, + CVE-2026-31912, CVE-2026-6244, CVE-2026-6554 + libpng: CVE-2026-46675 + libseccomp: GHSA-2hqh-5c36-grrm, GHSA-46fr-jh49-xvhx, + GHSA-4q85-33p6-j5g6 + lldpd: CVE-2026-46433 + m4: CVE-2008-1687 + mbedtls: CVE-2026-25832, CVE-2026-35336, CVE-2026-49300, + CVE-2026-50579, CVE-2026-50580, CVE-2026-50581, CVE-2026-50583, + CVE-2026-50584, CVE-2026-50585, CVE-2026-50586, CVE-2026-50587, + CVE-2026-50588, CVE-2026-50640, CVE-2026-50713, CVE-2026-54435, + CVE-2026-54441, CVE-2026-73064, CVE-2026-73096 + nano: CVE-2026-6843 + ntpsec: CVE-2026-18321 + openvpn: CVE-2026-84471, CVE-2026-84732 + patchelf: CVE-2022-44940 + pcre2: GHSA-2p8c-ff85-vh9x, GHSA-3r4p-g7gg-ppmf, GHSA-9qww-pwc4-77qq, + GHSA-fmgr-6ggq-9859, GHSA-q7rw-r7qq-2hx6, GHSA-q8g2-wprr-34m9, + GHSA-r9hj-j2rw-4q3m + php: CVE-2026-109618, CVE-2026-109619, GHSA-6wmf-4rv5-p3rp, + GHSA-w8hw-w9fx-j79w + python-twisted: CVE-2026-42304 + python3: CVE-2026-15310, CVE-2026-15806, CVE-2026-17084, + CVE-2026-19445, CVE-2026-19553, CVE-2026-19672, CVE-2026-82049, + CVE-2026-87910 + qt6declarative: CVE-2025-14576 + qt6svg: CVE-2021-45930 + seatd: CVE-2021-41387 + tcpreplay: GHSA-27v4-xhfx-g2rx, GHSA-2wmf-4p77-784q, + GHSA-4hqm-8v2c-9pwj, GHSA-5cjx-62pj-pmgq, GHSA-5q26-7fxx-v8fh, + GHSA-777w-9599-w8g4, GHSA-fwcr-mqg6-hqmx, GHSA-jj65-mrgg-f5fx, + GHSA-m655-53p4-6qm8, GHSA-m6w7-8497-g9c9, GHSA-p3f2-88rg-9mch, + GHSA-p7xp-4gj2-x56c, GHSA-pfqg-243f-8q25, GHSA-pjh6-6hrw-vcwr, + GHSA-pmmx-m8p5-969j, GHSA-v8c4-9w98-9v6v, GHSA-ww62-mxv7-pg55 + thrift: CVE-2026-41608, CVE-2026-61373, CVE-2026-61374, CVE-2026-63772, + CVE-2026-66054, CVE-2026-66055, CVE-2026-66081, CVE-2026-66331, + CVE-2026-66837, CVE-2026-66858, CVE-2026-66859, CVE-2026-82458, + CVE-2026-82459, CVE-2026-83632, CVE-2026-83663, CVE-2026-83745, + CVE-2026-85086, CVE-2026-85087, CVE-2026-85088, CVE-2026-85476, + CVE-2026-85483, CVE-2026-85493, CVE-2026-85494, CVE-2026-86535, + CVE-2026-86536, CVE-2026-86537, CVE-2026-87117, CVE-2026-90440, + CVE-2026-91135, CVE-2026-91137, CVE-2026-92834, CVE-2026-93925, + CVE-2026-93926, CVE-2026-94633, CVE-2026-94634, CVE-2026-94635, + CVE-2026-94636, CVE-2026-94637, CVE-2026-94638, CVE-2026-94639, + CVE-2026-94642, CVE-2026-94644, CVE-2026-94645, CVE-2026-94646, + CVE-2026-94648, CVE-2026-94650, CVE-2026-94651, CVE-2026-94652, + CVE-2026-94653, CVE-2026-94654, CVE-2026-94655, CVE-2026-94656, + CVE-2026-94657, CVE-2026-94658, CVE-2026-96277, CVE-2026-96286, + CVE-2026-96287, CVE-2026-96288, CVE-2026-96289, CVE-2026-96292, + CVE-2026-96294, CVE-2026-96990 + tor: TROVE-2026-012, TROVE-2026-030, TROVE-2026-032, TROVE-2026-033, + TROVE-2026-034, TROVE-2026-035, TROVE-2026-036, TROVE-2026-038, + TROVE-2026-041, TROVE-2026-042, TROVE-2026-043, TROVE-2026-050, + TROVE-2026-051, TROVE-2026-052, TROVE-2026-053, TROVE-2026-056, + TROVE-2026-058, TROVE-2026-062, TROVE-2026-064, TROVE-2026-067 + tpm2-tools: GHSA-gwfg-w3jr-xh66, GHSA-qp88-8f4j-wv7q, + GHSA-v7w4-4gc9-qcgv + turbolua: (no CVE assigned) + unbound: CVE-2026-77860, CVE-2026-77955, CVE-2026-78227, + CVE-2026-80225, CVE-2026-81634, CVE-2026-81642, CVE-2026-82717, + CVE-2026-82720, CVE-2026-85501 + vlc: (no CVE assigned) + wireshark: CVE-2025-11626, CVE-2025-13499, CVE-2025-13946, + CVE-2026-0959, CVE-2026-0960, CVE-2026-0961, CVE-2026-0962, + CVE-2026-15163, CVE-2026-15164, CVE-2026-15166, CVE-2026-15167, + CVE-2026-15168, CVE-2026-15169, CVE-2026-15170, CVE-2026-15171, + CVE-2026-15172, CVE-2026-15174, CVE-2026-3201, CVE-2026-3203, + CVE-2026-5299, CVE-2026-5401, CVE-2026-5403, CVE-2026-5404, + CVE-2026-5405, CVE-2026-5406, CVE-2026-5407, CVE-2026-5408, + CVE-2026-5409, CVE-2026-5653, CVE-2026-5654, CVE-2026-5656, + CVE-2026-5657, CVE-2026-6519, CVE-2026-6520, CVE-2026-6521, + CVE-2026-6522, CVE-2026-6523, CVE-2026-6524, CVE-2026-6527, + CVE-2026-6529, CVE-2026-6530, CVE-2026-6531, CVE-2026-6532, + CVE-2026-6533, CVE-2026-6534, CVE-2026-6535, CVE-2026-6537, + CVE-2026-6538, CVE-2026-6868, CVE-2026-6869, CVE-2026-6870, + CVE-2026-76879, CVE-2026-76880, CVE-2026-76881, CVE-2026-76882, + CVE-2026-76883, CVE-2026-76884, CVE-2026-76885, CVE-2026-76886, + CVE-2026-76887, CVE-2026-76888, CVE-2026-76889, CVE-2026-76890, + CVE-2026-76891, CVE-2026-76917, CVE-2026-76918, CVE-2026-76919, + CVE-2026-76920, CVE-2026-76921, CVE-2026-76922, CVE-2026-76923, + CVE-2026-76924, CVE-2026-76926, CVE-2026-76927, CVE-2026-76928, + CVE-2026-76929, CVE-2026-95387, CVE-2026-95388, CVE-2026-95389, + CVE-2026-95392, CVE-2026-95393, CVE-2026-95394, CVE-2026-95395, + CVE-2026-96415, CVE-2026-96416, CVE-2026-96417, CVE-2026-96418, + CVE-2026-96419, CVE-2026-96421, CVE-2026-96422, CVE-2026-96423, + wnpa-sec-2026-100, wnpa-sec-2026-101, wnpa-sec-2026-102, + wnpa-sec-2026-103, wnpa-sec-2026-104, wnpa-sec-2026-105, + wnpa-sec-2026-106, wnpa-sec-2026-107, wnpa-sec-2026-108, + wnpa-sec-2026-109, wnpa-sec-2026-110, wnpa-sec-2026-93, + wnpa-sec-2026-96, wnpa-sec-2026-97, wnpa-sec-2026-98, + wnpa-sec-2026-99 + wolfssl: CVE-2026-15442, CVE-2026-89102, CVE-2026-89133, + CVE-2026-89134, CVE-2026-89135, CVE-2026-89136, CVE-2026-93302, + CVE-2026-93304, CVE-2026-94417, CVE-2026-94418, CVE-2026-94419 + xdg-dbus-proxy: GHSA-r7hp-698j-2h6c + xkeyboard-config: CVE-2012-0064 + xlib_libXfont2: CVE-2026-44950, CVE-2026-59679 + xz: GHSA-5qpq-xqfv-j9pg + zabbix: CVE-2026-23920, CVE-2026-23921 + znc: CVE-2026-82373 + + Toolchain: + + - glibc: bump to version 2.41-163 + - linux-headers: bump to 5.10.271, 5.15.222, 6.1.189, 6.6.158, 6.12.112 + + Infrastructure updates/fixes: + + - utils/generate-cyclonedx: mark host packages as excluded + - utils/generate-cyclonedx: support schema version choice 1.6, 1.6.1, + 1.6.2, 1.7, 1.7.1 + - arch: x86: add support for XOP instruction set + - package/pkg-autotools.mk: also handle libtool 2.6.x + - utils/docker-run: mount and pass BR2_EXTERNAL dirs + - enforce BR2_DOWNLOAD_FORCE_CHECK_HASHES=y for missing hash files + - utils/docker-run: add NO_NETWORK variable + - checkpackagelib: improve CVE handling + - support/docker/Dockerfile: make $HOME folder read-only + - utils/getdeveloperlib.py: fix regexp used to find package infra + - utils/checkpackagelib: support other identifiers than CVE + - utils/checkpackagelib: check IGNORE_CVES identifiers match patch + trailers + - New runtime tests: tests_flat_stacksize, test_erlang, test_squid, + test_bubblewrap, test_harfbuzz, test_sqlitecpp + - runtime tests: fix TestPythonPy3NetworkmanagerGoi, TestLtpTestsuite + - runtime tests: test_generate_cyclonedx: additional tests for scp and + for vulnerabilities of packages with multiple possible versions + - utils/check-symbols: check for undefined host symbols + - pkg-stats: sort latest version by state + - utils/genrandconfig: reject qemu user mode on hosts with large pages + + Removed packages: ola + + Updated / fixed packages: apache, asterisk, bcc, bind, binutils, boost, + bubblewrap, ca-certificates, cannelloni, chrony, clamav, cpp-httplib, + dhcpcd, e2fsprogs, edk2, erlang, exim, expat, falcosecurity-libs, + fcft, flutter-engine, gawk, gcc-initial, gerbera, ghostscript, glibc, + glslsandbox-player, gnu-efi, gnuradio, go, gpsd, grub2, gumbo-parser, + haproxy, haveged, hidapi, htop, hwdata, i2pd, ibrcommon, inadyn, + intel-mediasdk, intel-vpl-gpu-rt, iproute2, ivi-homescreen, kbd, + kodi, libabseil-cpp, libarchive, libest, libgphoto2, libgtk3, + libheif, libmpeg2, libopenssl, libpcap, libpng, libseccomp, libssh, + linux, linux-headers, linux-tools, lldpd, luvi, lvm2, m4, mali-t76x, + mbedtls, mpg123, mrouted, nano, netdata, netsnmp, network-manager, + nfs-utils, ntpsec, openjdk, openjdk-bin, openvpn, patchelf, pcre2, + php, pulseview, python-certifi, python-googleapis-common-protos, + python-grpcio, python-grpcio-reflection, python-numpy, python-scipy, + python-twisted, python3, qemu, qt5cinex, qt6declarative, qt6svg, + rpi-rgb-led-matrix, rtl8812au-aircrack-ng, screen, seatd, setserial, + shadowsocks-libev, skopeo, sound-theme-borealis, sqlitecpp, + strongswan, stunnel, swig, sysprof, tcpreplay, tensorflow-lite, + thrift, tor, tpm2-tools, turbolua, tzdata, udisks, unbound, + util-linux, util-linux-libs, vboot-utils, vlc, webkitgtk, wireshark, + wolfssl, wpewebkit, xdg-dbus-proxy, xen, xkeyboard-config, + xlib_libXfont2, xz, zabbix, zfs, znc + +2025.02.18, released September 10, 2026 + + Important / security related fixes: + + avro-c: (no CVE assigned) + clamav: CVE-2026-20031, CVE-2026-20213, CVE-2026-20214, CVE-2026-20215, + CVE-2026-20216, CVE-2026-20217, CVE-2026-20243, CVE-2026-20244, + CVE-2026-20339, CVE-2026-20345, CVE-2026-20346, CVE-2026-20347, + CVE-2026-20348 + dnsmasq: CVE-2026-12725, CVE-2026-12969 + erlang: CVE-2026-21620, CVE-2026-23941, CVE-2026-23942, CVE-2026-23943, + CVE-2026-28810, CVE-2026-32147, CVE-2026-42789, CVE-2026-42790 + exiv2: CVE-2026-49275, CVE-2026-68546, CVE-2026-68547, + GHSA-3695-mjv8-3r52, GHSA-9v3x-mhg4-wwv2, GHSA-fgw8-p7pr-37cp, + GHSA-hxph-pv7w-8649, GHSA-jcgh-p9v3-pw6j, GHSA-vg6c-9f6h-4x5q + expat: CVE-2026-66046, CVE-2026-76641, CVE-2026-76956, CVE-2026-76957 + glibc: CVE-2026-18374, CVE-2026-19499, CVE-2026-5435, CVE-2026-6238, + CVE-2026-6368, CVE-2026-6791, CVE-2026-77117, CVE-2026-80489 + go: CVE-2026-33818, CVE-2026-39821, CVE-2026-46600, CVE-2026-56853, + CVE-2026-56858, CVE-2026-56859, CVE-2026-56860, CVE-2026-56862, + CVE-2026-56864, CVE-2026-56865 + haproxy: (no CVE assigned) + hostapd: CVE-2026-58374 + libcurl: CVE-2026-13608, CVE-2026-18924, CVE-2026-19931, + CVE-2026-80229, CVE-2026-80230, CVE-2026-80231, CVE-2026-80255, + CVE-2026-82208, CVE-2026-82209 + libde265: GHSA-mm7m-v26f-wf8x, GHSA-xp3h-6f5r-8cxp + libgit2: CVE-2026-5917 + libheif: CVE-2026-84450, CVE-2026-84451, GHSA-24wx-9w62-c96w, + GHSA-2jg2-4ch7-h545, GHSA-4h82-g446-83fm, GHSA-4jqm-2x34-6f6r, + GHSA-73p7-m7gg-w2jv, GHSA-8857-r8x5-7499, GHSA-8fmq-r4pf-7m57, + GHSA-9rj8-5mp5-26c9, GHSA-g89c-p67h-r497, GHSA-gh5q-69gg-c964, + GHSA-hh47-fhqr-cj2r, GHSA-j264-xvrp-5v7q, GHSA-jc8f-p23p-5hjg, + GHSA-mw6f-29j3-76f4, GHSA-p58j-h3vm-3fp5, GHSA-w7mc-p8jc-p853, + GHSA-x8r2-mggj-j6wr, GHSA-x8xm-cm2c-cfc8, GHSA-xw34-mjcp-jqh8 + libldns: CVE-2026-10846 + libopenssl: CVE-2026-14456, CVE-2026-14457, CVE-2026-18798, + CVE-2026-54874, CVE-2026-63072, CVE-2026-63073, CVE-2026-63074, + CVE-2026-63075, CVE-2026-63076, CVE-2026-75803 + libssh2: CVE-2025-15661, CVE-2026-66032, CVE-2026-66033, + CVE-2026-66034, CVE-2026-66035 + libxml2: CVE-2026-11979 + localedef: CVE-2026-18374, CVE-2026-19499, CVE-2026-5435, + CVE-2026-6238, CVE-2026-6368, CVE-2026-6791, CVE-2026-77117, + CVE-2026-80489 + mongoose: CVE-2026-63626, CVE-2026-73251, CVE-2026-73252, + CVE-2026-73260, CVE-2026-73261 + nodejs: CVE-2026-56846, CVE-2026-56847, CVE-2026-56848, CVE-2026-56850, + CVE-2026-58039, CVE-2026-58040, CVE-2026-58042, CVE-2026-58043, + CVE-2026-58044, CVE-2026-58045 + openvpn: CVE-2026-84732 + proftpd: CVE-2026-44331 + python-avro: (no CVE assigned) + redis: (no CVE assigned) + rsyslog: CVE-2026-19654 + udisks: CVE-2026-7867 + unbound: CVE-2026-14586, CVE-2026-32665, CVE-2026-40622, + CVE-2026-40691, CVE-2026-41637, CVE-2026-42955, CVE-2026-44621, + CVE-2026-44687, CVE-2026-44690, CVE-2026-46582, CVE-2026-50045, + CVE-2026-50046, CVE-2026-50243, CVE-2026-50248, CVE-2026-50251, + CVE-2026-50252, CVE-2026-52863, CVE-2026-54478, CVE-2026-55708, + CVE-2026-55717, CVE-2026-55973, CVE-2026-55990, CVE-2026-55991, + CVE-2026-56416, CVE-2026-56444 + wget: CVE-2026-58469, CVE-2026-58470, CVE-2026-58471 + + Toolchain: + + - linux-headers: bump to 5.10.269, 5.15.220, 6.1.187, 6.6.156, 6.12.109 + - powerpc: correctly track libquadmath + + Infrastructure updates/fixes: + + - Various fixes to the runtime tests + - manual: document move of patchwork to patchwork.buildroot.org + - manual: document the LTS release cadence correctly + - Fix setting of stack size for FLAT binaries + + Updated defconfigs: qemu_xtensa_lx60* + + Updated / fixed packages: avro-c, bind, clamav, collectd, dejavu, + dnsmasq, dpdk, dracut, erlang, exiv2, expat, gcc-bare-metal, gdb, + glibc, go, haproxy, hostapd, libcurl, libde265, libgit2, libheif, + libldns, libopenssl, libssh2, libxkbcommon, libxml-parser-perl, + libxml2, linux, linux-headers, linux-tools, localedef, mongoose, + mosquitto, newt, nodejs, opencv4, openssh, openvpn, perl, powerpc, + proftpd, python-avro, python-charset-normalizer, qt5knx, + qt6declarative, redis, rsyslog, taglib, uclibc, udisks, unbound, vim, + webkitgtk, wget, wine, wireless-regdb + +2025.02.17, released August 23, 2026 + + Important / security related fixes: + + apr-util: CVE-2025-49506, CVE-2026-32327, CVE-2026-34191, + CVE-2026-34501, CVE-2026-34502 + bind: CVE-2026-10723, CVE-2026-10822, CVE-2026-11331, CVE-2026-11605, + CVE-2026-11622, CVE-2026-11721, CVE-2026-12617, CVE-2026-13204, + CVE-2026-13321 + botan: CVE-2026-32877, CVE-2026-32883, CVE-2026-32884, CVE-2026-34580, + CVE-2026-34582 + busybox: CVE-2023-39810, CVE-2024-58251, CVE-2026-26157, + CVE-2026-26158, CVE-2026-29004 + containerd: CVE-2026-35469, CVE-2026-46680, CVE-2026-47262, + CVE-2026-53488 + dracut: CVE-2026-6893 + dropbear: (no CVE assigned) + exim: GCVE-25-2026-07-45-1, CVE-2026-66140, CVE-2026-66141 + expat: CVE-2026-72522 + go: CVE-2026-39822 + intel-microcode: CVE-2025-31936, CVE-2025-31938, CVE-2025-35973, + CVE-2026-20707, CVE-2026-20713, CVE-2026-20716, CVE-2026-20760, + CVE-2026-20917 + libarchive: (no CVE assigned) + libass: CVE-2026-61626, CVE-2026-61627 + libgcrypt: CVE-2026-41989 + libgit2: CVE-2026-53583, CVE-2026-53584, CVE-2026-53585, + CVE-2026-53586, CVE-2026-53587 + libheif: CVE-2026-62289, CVE-2026-62291, CVE-2026-62292, + CVE-2026-62377, GHSA-46rp-pcq2-rpmr, GHSA-73p7-m7gg-w2jv, + GHSA-9ww4-9v47-m7pj, GHSA-jc8f-p23p-5hjg, GHSA-xpw3-9rhw-482x + libmodsecurity: CVE-2026-52747, CVE-2026-52761 + libssh: CVE-2026-15370, CVE-2026-59843, CVE-2026-59844, CVE-2026-59845, + CVE-2026-59846, CVE-2026-59847, CVE-2026-59848, CVE-2026-59849, + CVE-2026-59850 + memcached: (no CVE assigned) + ntfs-3g: CVE-2026-42616, CVE-2026-42617, CVE-2026-42618, + CVE-2026-46569, CVE-2026-46570, CVE-2026-46571, CVE-2026-46572, + CVE-2026-56135, CVE-2026-56136 + openssh: CVE-2026-59995, CVE-2026-59996, CVE-2026-59997, + CVE-2026-59998, CVE-2026-59999, CVE-2026-60000, CVE-2026-60001, + CVE-2026-60002 + openvpn: CVE-2026-63649 + perl: CVE-2026-13221, CVE-2026-57432, CVE-2026-8376 + php: CVE-2026-17543, CVE-2026-7260, CVE-2026-9672 + postgresql: CVE-2026-14662, CVE-2026-14663, CVE-2026-14664, + CVE-2026-14666, CVE-2026-14668, CVE-2026-14669, CVE-2026-14670, + CVE-2026-14671, CVE-2026-14672, CVE-2026-14673, CVE-2026-14676, + CVE-2026-14677, CVE-2026-14678, CVE-2026-14679, CVE-2026-14680, + CVE-2026-14681, CVE-2026-15741, CVE-2026-15742, CVE-2026-16238, + CVE-2026-16239, CVE-2026-16241, CVE-2026-18024, CVE-2026-18408, + CVE-2026-19385, CVE-2026-6464, CVE-2026-6469, CVE-2026-6470, + CVE-2026-6471 + python3: CVE-2025-13462, CVE-2026-15308, CVE-2026-2297, CVE-2026-3644, + CVE-2026-4224, CVE-2026-4519, CVE-2026-7210 + redis: (no CVE assigned) + rsync: CVE-2026-53783, CVE-2026-53784, CVE-2026-53785, CVE-2026-53786, + CVE-2026-53788, CVE-2026-53789, CVE-2026-53790, CVE-2026-53791, + CVE-2026-53792, CVE-2026-53793, CVE-2026-53794, CVE-2026-53795, + CVE-2026-53796, CVE-2026-53797, CVE-2026-53798, CVE-2026-53799, + CVE-2026-53800, CVE-2026-53801, CVE-2026-53802, CVE-2026-53803, + CVE-2026-70452, CVE-2026-70453, CVE-2026-70454, CVE-2026-70455, + CVE-2026-70456, CVE-2026-70457, CVE-2026-70458, CVE-2026-70459, + CVE-2026-70460, CVE-2026-70461, CVE-2026-70462, CVE-2026-70463, + CVE-2026-70464 + samba4: CVE-2026-58216, CVE-2026-58218, CVE-2026-58221, CVE-2026-58222, + CVE-2026-58224, CVE-2026-6949 + screen: (no CVE assigned) + ser2net: GHSA-cgh5-39mg-vhfr + socat: CVE-2026-56123 + sqlite: CVE-2026-1182, CVE-2026-11822, CVE-2026-11824 + stunnel: CVE-2026-70367, CVE-2026-70368 + syslog-ng: CVE-2026-39879 + util-linux: CVE-2026-13595 + vim: CVE-2026-28417, CVE-2026-28418, CVE-2026-28419, CVE-2026-28420, + CVE-2026-28421, CVE-2026-28422, CVE-2026-32249, CVE-2026-33412, + CVE-2026-34714, CVE-2026-34982, CVE-2026-35177, CVE-2026-39881, + CVE-2026-41411, CVE-2026-42307, CVE-2026-44656, CVE-2026-45130, + CVE-2026-46483, CVE-2026-47162, CVE-2026-47167, CVE-2026-52858, + CVE-2026-52859, CVE-2026-52860, CVE-2026-55693, CVE-2026-55892, + CVE-2026-55895, CVE-2026-57451, CVE-2026-57452, CVE-2026-57453, + CVE-2026-57455, CVE-2026-57456, CVE-2026-59856, CVE-2026-59857, + CVE-2026-59858 + wpa_supplicant: (no CVE assigned) + xlib_libXfont2: CVE-2026-56001, CVE-2026-56002, CVE-2026-56003 + xserver_xorg-server: CVE-2026-55999, CVE-2026-56000 + xwayland: CVE-2026-55999, CVE-2026-56000 + + Toolchain: + + - toolchain-buildroot: drop Synopsys ARC specific GCC, binutils and gdb + - toolchain-external: drop Synopsys ARC toolchain + - linux-headers:: bump to 5.10.265, 5.15.216, 6.1.183, 6.6.152, + 6.12.104 + + Infrastructure updates/fixes: + + - Add license information for skeleton packages + - Make docker image reproducible again + - New runtime tests for guile, libgpiod2, mdnsd, php, python-pydal + + Updated defconfigs: acmesystems_acqua_a5_* + + Removed defconfigs: acmesystems_aria_g25_{128mb, 256mb}, + acmesystems_arietta_g25_{128mb, 256mb}, s6lx9_microboard, ts4900, + ts5500 + + Removed packages: argparse, ts4900-fpga + + Updated / fixed packages: apache, apr-util, arm-trusted-firmware, + at-spi2-core, bind, binutils, botan, busybox, cantarell, cifs-utils, + containerd, cramfs, dbus-broker, dracut, drop, dropbear, + environment-setup, exim, expat, glibc, go, guile, gvfs, + ifupdown-scripts, initscripts, intel-microcode, libarchive, libass, + libcamera, libgcrypt, libgee, libgit2, libglib2, libgpg-error, + libgtk4, libgudev, libheif, libmicrohttpd, libmodsecurity, libpeas, + librsvg, libsecret, libsoup, libsoup3, libssh, linux, linux-headers:, + localedef, mbedtls, memcached, mini-snmpd, nettle, ntfs-3g, ogre, + open62541, openblas, openssh, openvpn, optee-os, p11-kit, pahole, + perl, php, postgresql, python-paho-mqtt, python-pydal, python-web2py, + python3, qt6, quickjs, redis, rsync, rygel, samba4, screen, ser2net, + socat, sqlite, stunnel, syslog-ng, uclibc, urandom-scripts, usbutils, + util-linux, vim, wpa_supplicant, xlib_libXfont2, xserver_xorg-server, + xwayland, xz + +2025.02.16, released July 15, 2026 + + Important / security related fixes: + + apache: CVE-2026-29167, CVE-2026-29170, CVE-2026-34355, CVE-2026-34356, + CVE-2026-42535, CVE-2026-42536, CVE-2026-43951, CVE-2026-44119, + CVE-2026-44185, CVE-2026-44186, CVE-2026-44631, CVE-2026-48913, + CVE-2026-49975 + asterisk: GHSA-3g56-cgrh-95p5, GHSA-3rhj-hhw7-m6fw, + GHSA-4pgv-j3mr-3rcp, GHSA-589g-qgf8-m6mx, GHSA-746q-794h-cc7f, + GHSA-8jhw-m2hg-vp3h, GHSA-8jw3-ccr9-xrmf, GHSA-g8q2-p36q-94f6, + GHSA-h5hv-jmgj-92q2, GHSA-j2mm-57pq-jh94, GHSA-mxgm-8c6f-5p8f, + GHSA-ph27-3m5q-mj5m, GHSA-q9fr-m7g8-6ph5, GHSA-qf8j-jp7h-c5hx, + GHSA-r6c2-hwc2-j4mp, GHSA-vfhr-r9x9-c687, GHSA-vrfp-mg3q-3959, + GHSA-wcvv-g26m-wx5c, GHSA-x348-j6c9-77f3, GHSA-xgj6-2gc5-5x9c + avahi: CVE-2026-34933 + bind: (no CVE assigned), CVE-2026-3593 + cpp-httplib: CVE-2026-45352, CVE-2026-45372, CVE-2026-46527 + cups-filters: CVE-2025-64503 + expat: CVE-2026-50219, CVE-2026-56131, CVE-2026-56132, CVE-2026-56403, + CVE-2026-56404, CVE-2026-56405, CVE-2026-56406, CVE-2026-56407, + CVE-2026-56408, CVE-2026-56409, CVE-2026-56410, CVE-2026-56411, + CVE-2026-56412 + ghostscript: (no CVE assigned) + glibc: CVE-2026-5450, CVE-2026-5928 + icu: CVE-2025-5222 + imagemagick: CVE-2026-48724, CVE-2026-48733, CVE-2026-48734, + CVE-2026-48994, CVE-2026-49218, CVE-2026-49219, CVE-2026-53460, + CVE-2026-53461, CVE-2026-53462, CVE-2026-53463, CVE-2026-53464, + CVE-2026-53465 + jq: CVE-2026-32316, CVE-2026-33947, CVE-2026-33948, CVE-2026-39979, + CVE-2026-40164, CVE-2026-40612, CVE-2026-41256, CVE-2026-41257, + CVE-2026-43894, CVE-2026-43896, CVE-2026-44777, CVE-2026-49839, + CVE-2026-54679 + libarchive: (no CVE assigned) + libcurl: CVE-2026-10536, CVE-2026-11352, CVE-2026-11564, + CVE-2026-11586, CVE-2026-11856, CVE-2026-12064, CVE-2026-8286, + CVE-2026-8458, CVE-2026-8924, CVE-2026-8925, CVE-2026-8926, + CVE-2026-8927, CVE-2026-8932, CVE-2026-9079, CVE-2026-9080, + CVE-2026-9545, CVE-2026-9546, CVE-2026-9547 + libevent: (no CVE assigned) + libglib2: CVE-2025-14087 + libgsasl: CVE-2026-48829 + libinput: CVE-2026-50292 + libopenssl: CVE-2026-34180, CVE-2026-34181, CVE-2026-34182, + CVE-2026-34183, CVE-2026-42764, CVE-2026-42766, CVE-2026-42767, + CVE-2026-42768, CVE-2026-42769, CVE-2026-42770, CVE-2026-45445, + CVE-2026-45446, CVE-2026-45447, CVE-2026-7383, CVE-2026-9076 + libssh2: CVE-2026-55199, CVE-2026-55200 + mariadb: CVE-2026-48163, CVE-2026-48165, CVE-2026-49261 + mesa3d: CVE-2026-40393 + mongoose: (no CVE assigned yet) + nginx: CVE-2026-42055, CVE-2026-48142 + openjpeg: CVE-2026-6192 + openvpn: CVE-2026-11771, CVE-2026-12932, CVE-2026-12996, + CVE-2026-13117, CVE-2026-13122, CVE-2026-13698 + php: CVE-2026-12184, CVE-2026-14355 + python-django: CVE-2026-35192, CVE-2026-35193, CVE-2026-48587, + CVE-2026-5766, CVE-2026-6873, CVE-2026-6907, CVE-2026-7666, + CVE-2026-8404 + python3: CVE-2026-11940, CVE-2026-9669 + redis: CVE-2026-23479, CVE-2026-23631, CVE-2026-25243 + squid: CVE-2026-33515, CVE-2026-33526, CVE-2026-47729, CVE-2026-50012 + sudo: CVE-2026-35535 + swupdate: CVE-2026-28525 + tiff: CVE-2026-36849 + tor: TROVE-2026-025, TROVE-2026-026. + util-linux: CVE-2025-14104, CVE-2026-27456, CVE-2026-53612, + CVE-2026-53613, CVE-2026-53614 + webkitgtk: CVE-2026-28847, CVE-2026-28883, CVE-2026-28901, + CVE-2026-28902, CVE-2026-28903, CVE-2026-28904, CVE-2026-28905, + CVE-2026-28907, CVE-2026-28942, CVE-2026-28946, CVE-2026-28947, + CVE-2026-28953, CVE-2026-28955, CVE-2026-28958, CVE-2026-43658, + CVE-2026-43660 + wolfssl: CVE-2026-10097, CVE-2026-10098, CVE-2026-10512, + CVE-2026-10592, CVE-2026-11310, CVE-2026-11703, CVE-2026-11999, + CVE-2026-12340, CVE-2026-55958, CVE-2026-55960, CVE-2026-55961, + CVE-2026-55962, CVE-2026-55964, CVE-2026-55967, CVE-2026-6091, + CVE-2026-6092, CVE-2026-6094, CVE-2026-6291, CVE-2026-6325, + CVE-2026-6329, CVE-2026-6330, CVE-2026-6331, CVE-2026-6412, + CVE-2026-6450, CVE-2026-6678, CVE-2026-6681, CVE-2026-6731, + CVE-2026-7511, CVE-2026-7531, CVE-2026-7532, CVE-2026-8720 + + Toolchain: + + - gcc: bump 14.x series to 14.4.0 + - glibc, localedef: security bump to version 2.41-143-gfc7a48bc9 + + Infrastructure updates/fixes: + + - support/testing Improve TestPythonPy3NetworkmanagerGoi + - generate-cyclonedx: fixup scp-style git sites + - support/testing: Fix test_gnupg2 + - support/testing: various internal refactorings + + Updated / fixed packages: apache, asterisk, avahi, bind, bind, + cpp-httplib, cpp-httplib, cups-filters, expat, gcc:, ghostscript, + glibc, hwdata, icu, imagemagick, jq, kodi-screensaver-rsxs, + libarchive, libcurl, libepoxy, libevent, libglib2, libglib2, + libglib2-bootstrap, libgsasl, libgsasl, libinput, libopenssl, + libssh2, libssh2, linux, mariadb, mdnsd, mesa3d, mongoose, mpd, + nginx, ntp, openjpeg, openrc, openvpn, php, python-django, python3, + python3, qt5, redis, rsync, ruby, shadow, shim, squid, squid, squid, + squid, strongswan, sudo, swupdate, tiff, tor, util-linux, util-linux, + util-linux, util-linux, util-linux, util-linux, webkitgtk, wolfssl + +2025.02.15, released June 16, 2026 + + Important / security related fixes: + + asterisk: GHSA-8fj4-fv9f-hjpc, GHSA-g88q-c2hm-q7p7, + GHSA-j29p-pvh2-pvqp, GHSA-x5pq-qrp4-fmrj + bind: CVE-2026-3039, CVE-2026-3592, CVE-2026-5946, CVE-2026-5950 + capnproto: CVE-2026-322, CVE-2026-32239, CVE-2026-32240 + cups-filters: CVE-2025-64524 + dnsmasq: CVE-2026-2291, CVE-2026-4890, CVE-2026-4891, CVE-2026-4892, + CVE-2026-4893, CVE-2026-5172 + dropbear: CVE-2019-6111, CVE-2026-35385 + exim: (no CVE assigned), CVE-2026-48840 + expat: CVE-2026-45186 + freeipmi: CVE-2026-50031 + glibc: CVE-2026-4046, CVE-2026-4437, CVE-2026-4438, CVE-2026-5450, + CVE-2026-5928 + go: (no CVE assigned), CVE-2025-61726, CVE-2025-61728, CVE-2025-61730, + CVE-2025-61731, CVE-2025-61732, CVE-2025-68121, CVE-2025-68121, + CVE-2026-25679, CVE-2026-27137, CVE-2026-27138, CVE-2026-27139, + CVE-2026-27140, CVE-2026-27142, CVE-2026-27143, CVE-2026-27144, + CVE-2026-32280, CVE-2026-32281, CVE-2026-32283, CVE-2026-32288, + CVE-2026-32289, CVE-2026-33810, CVE-2026-33811, CVE-2026-33814, + CVE-2026-39817, CVE-2026-39819, CVE-2026-39820, CVE-2026-39823, + CVE-2026-39825, CVE-2026-39826, CVE-2026-39836, CVE-2026-42499, + CVE-2026-42501 + go-bootstrap-stage5: CVE-2026-33811, CVE-2026-33814, CVE-2026-39817, + CVE-2026-39819, CVE-2026-39820, CVE-2026-39823, CVE-2026-39825, + CVE-2026-39826, CVE-2026-39836, CVE-2026-42499, CVE-2026-42501 + haveged: CVE-2026-41054 + imagemagick: CVE-2026-42326, CVE-2026-45031, CVE-2026-45358, + CVE-2026-45359, CVE-2026-45624, CVE-2026-45664, CVE-2026-46520, + CVE-2026-46521, CVE-2026-46522, CVE-2026-46523, CVE-2026-46557, + CVE-2026-46559 + intel-microcode: CVE-2025-35979 + libde265: CVE-2026-45382, CVE-2026-45383, GHSA-ccfw-29x7-rrx3, + GHSA-j2qq-x2xq-g9wr + libgpg-error: T8239 + libheif: CVE-2026-32738, CVE-2026-32739, CVE-2026-32740, + CVE-2026-32741, CVE-2026-32814, CVE-2026-32882, CVE-2026-3949, + CVE-2026-41069, CVE-2026-41071, CVE-2026-47178, CVE-2026-47247, + CVE-2026-47251, CVE-2026-47254, CVE-2026-47709, CVE-2026-47714, + GHSA-5hqq-636x-r3cr, GHSA-6x5f-qchq-cxqv, GHSA-jvmp-j3cw-84mh, + GHSA-r7qj-cg5r-r6vf + libmad: CVE-2017-837, CVE-2017-8372, CVE-2017-8373, CVE-2017-8374 + libmodsecurity: CVE-2026-30923, CVE-2026-42268 + libssh2: CVE-2026-7598 + liburiparser: CVE-2026-44927, CVE-2026-44928 + libusb: CVE-2026-23679, CVE-2026-47104 + libvncserver: CVE-2026-3285, CVE-2026-32853, CVE-2026-32854 + linux-pam: CVE-2025-6020 + mariadb: CVE-2026-34303, CVE-2026-3494, CVE-2026-44168, CVE-2026-44169, + CVE-2026-44170, CVE-2026-44171, CVE-2026-44172, CVE-2026-44173 + memcached: (no CVE assigned) + nginx: CVE-2026-40460, CVE-2026-40701, CVE-2026-42926, CVE-2026-42934, + CVE-2026-42945, CVE-2026-42946, CVE-2026-9256 + openssh: CVE-2025-61984, CVE-2025-61985, CVE-2026-35385, + CVE-2026-35386, CVE-2026-35387, CVE-2026-35388, CVE-2026-35414 + php: CVE-2025-14179, CVE-2026-6722, CVE-2026-6735, CVE-2026-7258, + CVE-2026-7259, CVE-2026-7261, CVE-2026-7262, CVE-2026-7568 + postgresql: CVE-2026-6472, CVE-2026-6473, CVE-2026-6474, CVE-2026-6475, + CVE-2026-6476, CVE-2026-6477, CVE-2026-6478, CVE-2026-6479, + CVE-2026-6575, CVE-2026-6637, CVE-2026-6638 + putty: CVE-2026-48850, CVE-2026-48851, CVE-2026-48852 + python-urllib3: CVE-2026-44431, CVE-2026-44432 + python3: CVE-2026-3276, CVE-2026-7774, CVE-2026-8328 + radvd: CVE-2026-48715 + rsync: CVE-2026-29518, CVE-2026-43617, CVE-2026-43618, CVE-2026-43619, + CVE-2026-43620, CVE-2026-45232 + runc: CVE-2025-31133, CVE-2025-52565, CVE-2025-52881 + samba4: CVE-2026-1933, CVE-2026-2340, CVE-2026-3012, CVE-2026-3238, + CVE-2026-4408, CVE-2026-4480 + sdl2_image: CVE-2026-35444 + sed: CVE-2026-5958 + sshfs: CVE-2026-47187, CVE-2026-48711 + tor: TROVE-2026-013, TROVE-2026-014, TROVE-2026-015, TROVE-2026-016, + TROVE-2026-017, TROVE-2026-018, TROVE-2026-019, TROVE-2026-020, + TROVE-2026-021, TROVE-2026-022 + unbound: CVE-2026-32792, CVE-2026-33278, CVE-2026-40622, + CVE-2026-41292, CVE-2026-42534, CVE-2026-42923, CVE-2026-42944, + CVE-2026-42959, CVE-2026-42960, CVE-2026-44390, CVE-2026-44608 + unzip: CVE-2021-4217 + xserver_xorg-server: (no CVE assigned) + xwayland: (no CVE assigned) + + Toolchain: + + - linux-headers:: bump to 5.10.257, 5.15.208, 6.1.174, 6.6.141, 6.12.91 + + Infrastructure updates/fixes: + + - generate-cyclonedx: generate externalReferences with + source-distribution + - Remove /usr/share/info/dir from target + - bump-stable-kernel-versions: update for split hash file + - cve-check: fix vulnerability timestamp to RFC 3339 + - cve-check: remove 'bom-ref' for vulnerabilities + - generate-cyclonedx: add hashes from .hash files to externalReferences + - dependencies.sh: reject buggy uutils "install" on Ubuntu 26.04 + - add 'make show-info-all' + - cve-check: fix vulnerabilities with different analysis + - kconfig: fix compiler warnings + - generate-cyclonedx: remove indirect dependencies from root component + - cve-check: add indication how to run + - generate-cyclonedx: generate vcs externalReferences for source repos + - gitlab-ci: use larger shared runners where necessary + - replicate IGNORE_CVES to host packages + - generate-cyclonedx: hint at missing Buildroot host package on a + specific error + + Updated defconfigs: at91sam9x5ek* + + Updated / fixed packages: libmicrohttpd, qt53d, crucible, libgit2, php, + esp-hosted, tzdata, libabseil-cpp, collectd, redis, swupdate, + libdill, zsh, samba4, haveged, arm-trusted-firmware, weston, + wireless-regdb, libssh2, go-bootstrap-stage5, jq, kodi, unbound, + lrzip, libgpg-error, hplip, expat, heimdal, glibc, go, imagemagick, + kexec, libnss, putty, libmad, vorbis-tools, libvncserver, rsync, + mongoose, intel-microcode, freeipmi, openssh, dos2unix, liburiparser, + zic, cups-filters, libks, odhcp6c, libmodsecurity, memcached, + graphene, vlc, capnproto, faad2, gcc-bare-metal, mariadb, qt6base, + python-ecdsa, runc, heirloom-mailx, icu, systemd, unzip, dnsmasq, + gst1-plugins-bad, cairo, dropbear, libusb, asterisk, hiredis, + linux-pam, sed, gstreamer1, xfsprogs, python-urllib3, radvd, + qt5webengine-chromium, sshfs, gdb, python3, sane-backends, + linux-headers:, zlib-ng, libheif, supertux, postgresql, + gst1-plugins-good, libde265, libdrm, exim, linux, lrzsz, babeld, + bind, nginx, stellarium, sdl2_image, tor, libpthsem, wpewebkit, + libargon2, xwayland, python-cbor2, xserver_xorg-server, poppler, + jemalloc + +2025.02.14, released May 20, 2026 + + Changes with potentially large impact: + + - ficl was downgraded to version 3.065 because ficl4 is no longer + maintained. + + Important / security related fixes: + + apache: CVE-2026-23918, CVE-2026-24072, CVE-2026-28780, CVE-2026-29168, + CVE-2026-29169, CVE-2026-33006, CVE-2026-33007, CVE-2026-33523, + CVE-2026-33857, CVE-2026-34032, CVE-2026-34059 + bubblewrap: CVE-2026-41163 + cups: CVE-2026-27447, CVE-2026-34978, CVE-2026-34979, CVE-2026-34980, + CVE-2026-34990, CVE-2026-39314, CVE-2026-39316, CVE-2026-41079 + dash: CVE-2026-31323 + dropbear: CVE-2019-6111, CVE-2026-35385 + exim: CVE-2026-40684, CVE-2026-40685, CVE-2026-40686, CVE-2026-40687 + expat: CVE-2026-7210, CVE-2026-41080 + ffmpeg: CVE-2026-30997 + freetype: CVE-2026-23865 + ghostscript: (no CVE assigned) + giflib: CVE-2021-40633, CVE-2025-31344, CVE-2026-23868 + gnutls: CVE-2026-33845, CVE-2026-33846, CVE-2026-3832, CVE-2026-3833, + CVE-2026-42009, CVE-2026-42010, CVE-2026-42011, CVE-2026-42012, + CVE-2026-42013, CVE-2026-42014, CVE-2026-42015, CVE-2026-5260, + CVE-2026-5419 + imagemagick: CVE-2026-28493, CVE-2026-28494, CVE-2026-28686, + CVE-2026-28687, CVE-2026-28688, CVE-2026-28689, CVE-2026-28690, + CVE-2026-28691, CVE-2026-28692, CVE-2026-28693, CVE-2026-30883, + CVE-2026-30929, CVE-2026-30931, CVE-2026-30935, CVE-2026-30936, + CVE-2026-30937, CVE-2026-31853, CVE-2026-32259, CVE-2026-32636, + CVE-2026-33535, CVE-2026-33536, CVE-2026-33899, CVE-2026-33900, + CVE-2026-33901, CVE-2026-33902, CVE-2026-33905, CVE-2026-33908, + CVE-2026-34238, CVE-2026-40169, CVE-2026-40183, CVE-2026-40310, + CVE-2026-40311, CVE-2026-40312 + lcms2: CVE-2026-41254, CVE-2026-42798 + libcap: CVE-2026-4878 + libcurl: CVE-2026-7168, CVE-2026-7009, CVE-2026-6429, CVE-2026-6276, + CVE-2026-6253, CVE-2026-5773, CVE-2026-5545, CVE-2026-4873 + libexif: CVE-2026-40386, CVE-2026-40385, CVE-2026-32775 + libjxl: CVE-2025-12474, CVE-2026-1837 + libmicrohttpd: (no CVE assigned) + libpcap: CVE-2025-11961 + libpjsip: CVE-2026-25994, CVE-2026-26203, CVE-2026-26967, + CVE-2026-29068, CVE-2026-28799, CVE-2026-32942, CVE-2026-32945, + CVE-2026-33069, CVE-2026-34235, CVE-2026-40614, CVE-2026-40892, + CVE-2026-41416, CVE-2026-41415, CVE-2026-42225, CVE-2025-65102 + libspdm: GHSA-m4wc-xmvg-369f, GHSA-j54w-759w-xj3m + liburiparser: CVE-2026-42371 + libxml2: CVE-2026-6732 + log4cxx: CVE-2025-54812, CVE-2025-54813, CVE-2026-40023 + mbedtls: CVE-2025-66442, CVE-2026-25833, CVE-2026-25834, + CVE-2026-25835, CVE-2026-34871, CVE-2026-34872, CVE-2026-34873, + CVE-2026-34874, CVE-2026-34875, CVE-2026-34876, CVE-2026-34877 + musl: CVE-2026-6042, CVE-2026-40200 + nginx: CVE-2026-27654, CVE-2026-27784, CVE-2026-32647, CVE-2026-27651, + CVE-2026-28753, CVE-2026-28755, CVE-2025-53859, CVE-2025-23419, + CVE-2024-7347, CVE-2024-32760, CVE-2024-31079, CVE-2024-35200, + CVE-2024-34161 + opensc: CVE-2025-13763, CVE-2025-49010, CVE-2025-66215, CVE-2025-66038, + CVE-2025-66037 + openvpn: CVE-2026-40215, CVE-2026-35058 + p11-kit: CVE-2026-2100 + p7zip: CVE-2021-3520 + proftpd: CVE-2026-42167 + python-cbor2: CVE-2026-26209, CVE-2025-64076, CVE-2025-68131 + python-django: CVE-2026-3902, CVE-2026-4277, CVE-2026-4292, + CVE-2026-33033, CVE-2026-33034 + python-pyasn1: CVE-2026-30922 + python-pyopenssl: CVE-2026-27448, CVE-2026-27459 + python-requests: CVE-2026-25645 + python3: CVE-2024-6923, CVE-2025-13836, CVE-2025-59375 + rsync: (no CVE assigned) + ruby: CVE-2026-41316 + sqlite: CVE-2025-70873 + strongswan: CVE-2026-25075 + systemd: CVE-2026-40226 + thrift: CVE-2025-48431, CVE-2026-41602, CVE-2026-41603, CVE-2026-41604, + CVE-2026-41605, CVE-2026-41606, CVE-2026-41607, CVE-2026-41636, + CVE-2026-43868, CVE-2026-43869, CVE-2026-43870 + tor: CVE-2026-44597, CVE-2026-44599, CVE-2026-44600, CVE-2026-44601, + CVE-2026-44602, CVE-2026-44603 + util-linux: CVE-2026-27456 + webkitgtk: CVE-2026-20643, CVE-2026-20664, CVE-2026-20665, + CVE-2026-20691, CVE-2026-28857, CVE-2026-28859, CVE-2026-28861, + CVE-2026-28871, CVE-2025-43457, CVE-2025-46299, CVE-2026-20608, + CVE-2026-20635, CVE-2026-20636, CVE-2026-20644, CVE-2026-20652, + CVE-2026-20676 + wolfssl: CVE-2026-5264, CVE-2026-5263, CVE-2026-5295, CVE-2026-5466, + CVE-2026-5477, CVE-2026-5447, CVE-2026-5500, CVE-2026-5501, + CVE-2026-5503, CVE-2026-5187, CVE-2026-5188, CVE-2026-5448, + CVE-2026-5772, CVE-2026-5778, CVE-2026-3548, CVE-2026-3549, + CVE-2026-3547, CVE-2026-0819, CVE-2026-1005, CVE-2026-2645, + CVE-2026-3230, CVE-2025-12888, CVE-2025-11936, CVE-2025-11935, + CVE-2025-11934, CVE-2025-11933, CVE-2025-11931, CVE-2025-11932, + CVE-2025-12889, CVE-2025-13912, CVE-2025-7395, CVE-2025-7394, + CVE-2025-7396 + wolftpm: CVE-2025-7844 + xlib_libXpm: CVE-2026-4367 + xserver_xorg-server: CVE-2026-33999, CVE-2026-34000, CVE-2026-34001, + CVE-2026-34002, CVE-2026-34003 + xwayland: CVE-2026-33999, CVE-2026-34000, CVE-2026-34001, + CVE-2026-34002, CVE-2026-34003 + xz: CVE-2025-31115, CVE-2026-34743 + + Toolchain: + + - gcc: fix GCC 12, 13 and 14 build with host gcc 16, bump 12.x series + to 12.5.0 + - linux-headers: bump to 6.12.90, 6.6.140, 6.1.173, 5.15.207, 5.10.256 + + Infrastructure updates/fixes: + + - Various improvements to pkg-stats. + + New packages: libxmlsec1 + + Updated / fixed packages: apache, btrfs-progs, bubblewrap, c-icap, + ca-certificates, cmake, cups, dash, dropbear, exim, expat, ffmpeg, + ficl, freetype, frr, gcc, ghostscript, giflib, gnutls, haproxy, + imagemagick, initscripts, kmod, lcms2, libarchive, libcap, libcurl, + libexif, libinput, libjxl, libmicrohttpd, libpcap, libpjsip, libpng, + libsodium, libspdm, liburiparser, libxml2, linux, linux-headers, + log4cxx, mbedtls, mkpasswd, musl, mutt, neon, netsnmp, + network-manager, nginx, opensc, openssh, openvpn, p11-kit, p7zip, + proftpd, python-cbor2, python-certifi, python-django, + python-magic-wormhole, python-pyasn1, python-pyopenssl, + python-requests, python3, rsync, ruby, sqlite, strongswan, sudo, + systemd, thrift, tor, util-linux, watchdogd, webkitgtk, + wireless-regdb, wolfssl, wolftpm, xdg-dbus-proxy, xlib_libXpm, + xserver_xorg-server, xwayland, xz + +2025.02.13, released April 21, 2026 + + Changes with potentially large impact: + + - openssl was updated to 3.5.0 which has a few incompatible changes. + See https://github.com/openssl/openssl/releases/tag/openssl-3.5.0 + + Important / security related fixes: + + asterisk: CVE-2026-23739, CVE-2026-23741, CVE-2026-23738, + CVE-2026-23740 + bind: https://gitlab.isc.org/isc-projects/bind9/-/issues/5751, + CVE-2026-1519, https://gitlab.isc.org/isc- + projects/bind9/-/issues/5817, https://gitlab.isc.org/isc- + projects/bind9/-/issues/5800, https://gitlab.isc.org/isc- + projects/bind9/-/issues/5826 + cpp-httplib: CVE-2026-33745, CVE-2026-34441, CVE-2026-21428, + CVE-2026-22776, CVE-2026-28434, CVE-2026-28435, CVE-2026-29076, + CVE-2026-31870, CVE-2026-32627 + expat: CVE-2026-32776, CVE-2026-32777, CVE-2026-32778 + gpsd: CVE-2025-67268, CVE-2025-67269 + libarchive: [no CVE tracking] + libcurl: CVE-2026-3805, CVE-2026-3784, CVE-2026-3783, CVE-2026-1965 + libde265: CVE-2026-33164, CVE-2026-33165 + libheif: CVE-2025-68431 + libmicrohttpd: CVE-2025-59777, CVE-2025-62689 + libopenssl: CVE-2025-9230, CVE-2025-9231, CVE-2025-9232, CVE-2025-4575, + CVE-2025-11187, CVE-2025-15467, CVE-2025-15468, CVE-2025-15469, + CVE-2025-66199, CVE-2025-68160, CVE-2025-69418, CVE-2025-69419, + CVE-2025-69420, CVE-2025-69421, CVE-2026-22795, CVE-2026-22796, + CVE-2026-31790, CVE-2026-2673, CVE-2026-28387, CVE-2026-28388, + CVE-2026-28389, CVE-2026-28390, CVE-2026-31789 + libpng: CVE-2026-33416, CVE-2026-33636, CVE-2026-34757, + GHSA-6fr7-g8h7-v645 + libxml2: CVE-2026-1757, CVE-2026-0990, CVE-2026-0992, CVE-2025-10911, + CVE-2026-0989 + mongoose: CVE-2025-65502 + musl: CVE-2025-26519 + nfs-utils: CVE-2025-12801 + nghttp2: CVE-2026-27135 + perl: CVE-2026-4176 + python-django: CVE-2026-25673, CVE-2026-25674 + python-flask: CVE-2026-27205 + python-pyasn1: CVE-2026-23490 + python-pyjwt: CVE-2026-32597, GHSA-752w-5fwx-jx9f + python-tornado: CVE-2025-67724, CVE-2025-67725, CVE-2025-67726 + python-wheel: CVE-2026-24049 + quickjs: CVE-2025-62490, CVE-2025-62491, CVE-2025-62492, + CVE-2025-62493, CVE-2025-62494, CVE-2025-62495, CVE-2025-62496 + rauc: CVE-2026-34155 + redis: [No CVE tracking] + ruby: CVE-2025-27221, CVE-2025-58767, CVE-2025-61594, CVE-2026-27820 + tor: TROVE-2026-003, TROVE-2026-004 + wireshark: CVE-2025-11626 + + Toolchain: + + - uclibc: bump to 1.0.57 + - musl: bump to 1.2.6 + - linux-headers: bump to 6.12.81, 6.6.134, 6.1.168, 5.15.202, 5.10.252 + + Infrastructure updates/fixes: + + - Add SECURITY.md + - Automatically add 2025.02.x prefix for b4 users + - generate-cyclonedx: add source attribute with NVD reference for CVEs + - Fix cve-check's CVE URLs + - New runtime test for connman. + - Added support for "secondary" target that are less often tested in + autobuilders + - New runtime test for memcached + - Fix error handling in br2-external + + Updated defconfigs: aarch64_efi, nitrogen* + + Updated / fixed packages: asterisk, bind, cpp-httplib, expat, faketime, + freeradius-server, giflib, gpsd, ibm-sw-tpm2, leafnode2, libarchive, + libcurl, libde265, libftdi1, libheif, libmicrohttpd, libopenssl, libpng, + libspdm, libxml2, linux, linux-headers, ltp-testsuite, luvi, mongoose, + mpd, musl, nfs-utils, nghttp2, perl, python-djange, python-flask, + python-pyasn1, python-pyjwt, python-tornado, quickjs, rauc, redis, ruby, + sway, tor, uboot, uclibc, wireshark, zfs + +2025.02.12, released March 17, 2026 + + Important / security related fixes: + + botan: CVE-2024-50382, CVE-2024-50383 + c-ares: CVE-2025-62408 + containerd: CVE-2024-25621, CVE-2024-40635, CVE-2025-47291, + CVE-2025-64329 + cups: CVE-2025-58436, CVE-2025-61915 + exiv2: CVE-2026-25884, CVE-2026-27596, CVE-2026-27631 + fluidsynth: CVE-2025-56225 + freerdp: CVE-2024-32661, CVE-2026-23530, CVE-2026-23531, + CVE-2026-23532, CVE-2026-23533, CVE-2026-23534, CVE-2026-23948, + CVE-2026-24675, CVE-2026-24676, CVE-2026-24679, CVE-2026-24681, + CVE-2026-24682, CVE-2026-24683 + graphicsmagick, CVE-2025-27796 + igmpproxy: CVE-2025-50681 + imagemagick: CVE-2026-22770, CVE-2026-23874, CVE-2026-23876, + CVE-2026-24481, CVE-2026-25638, CVE-2026-25794, CVE-2026-25795, + CVE-2026-25796, CVE-2026-25798, CVE-2026-25799, CVE-2026-25897, + CVE-2026-25989, CVE-2026-26066, CVE-2026-26283, CVE-2026-26284, + CVE-2026-26983 + jasper: CVE-2025-8836, CVE-2025-8837 + libsoup3: CVE-2025-14523 + libssh: CVE-2025-14821, CVE-2026-0964, CVE-2026-0965, CVE-2026-0966, + CVE-2026-0967, CVE-2026-0968 + libtpms: CVE-2026-21444 + mupdf: CVE-2026-25556 + netsnmp: CVE-2025-68615 + patch: CVE-2018-6952, CVE-2019-20633 + postgresql: CVE-2026-2003, CVE-2026-2004, CVE-2026-2005, CVE-2026-2006 + rtl_433: CVE-2025-34450 + squid: CVE-2025-62168 + tinyproxy: CVE-2025-63938 + vim: CVE-2026-25749, CVE-2026-26269 + wpewebkit: CVE-2025-31273, CVE-2025-31278, CVE-2025-43211, + CVE-2025-43212, CVE-2025-43216, CVE-2025-43227, CVE-2025-43228, + CVE-2025-43240, CVE-2025-43265, CVE-2025-43272, CVE-2025-43342, + CVE-2025-43343, CVE-2025-43356, CVE-2025-43368, CVE-2025-6558 + + Infrastructure updates/fixes: + + linux: make license option visible for _CUSTOM_VERSION as well + support/testing/run-tests: fix Debian testing/unstable + + Updated / fixed packages: botan, c-ares, containerd, cups, dtc, exiv2, + faketime, flashbench, fluidsynth, freerdp, graphicsmagick, igmpproxy, + imagemagick, jasper, libsoup3, libssh, libtpms, libvips, libvirt, + libzlib, mupdf, netsnmp, patch, poco, postgresql, python-multipart, + qemu, rtl_433, squid, tinyproxy, util-linux, vim, webkitgtk, wmctrl, + wpewebkit + + Removed packages: qemu (cris target) + +2025.02.11, released February 20, 2026 + + avahi: CVE-2021-3468, CVE-2023-38469, CVE-2023-38470, CVE-2023-38471, + CVE-2023-38472, CVE-2023-38473, CVE-2024-52615, CVE-2024-52616, + CVE-2025-68276, CVE-2025-68468, CVE-2025-68471, CVE-2026-24401 + bind: CVE-2025-13878 + busybox: CVE-2025-46394, CVE-2025-60876 + expat: CVE-2026-24515, CVE-2026-25210 + glibc: CVE-2025-15281, CVE-2026-0861, CVE-2026-0915 + gnutls: CVE-2025-14831, CVE-2026-1584 + haproxy: CVE-2025-11230 + intel-microcode: CVE-2024-24853, CVE-2025-31648 + libopenssl: CVE-2025-11187, CVE-2025-15467, CVE-2025-15468, + CVE-2025-66199, CVE-2025-68160, CVE-2025-69418, CVE-2025-69419, + CVE-2025-69420, CVE-2025-69421, CVE-2026-22795, CVE-2026-22796 + libpng: CVE-2026-22695, CVE-2026-22801, CVE-2026-25646 + libtasn1: CVE-2025-13151 + libvpx + linux-pam: CVE-2024-10963 + nginx: CVE-2025-53859 + nodejs: CVE-2025-27210, CVE-2025-55130, CVE-2025-55131, CVE-2025-55132, + CVE-2025-59465, CVE-2025-59466, CVE-2026-21637 + python-django: CVE-2025-13473, CVE-2025-14550, CVE-2026-1207, CVE-2026-1285, + CVE-2026-1287, CVE-2026-1312 + python-urllib3: CVE-2026-21441 + strongswan: CVE-2025-62291 + tor: TROVE-2025-016 + vim: CVE-2025-66476 + webkitgtk + + Infrastructure updates/fixes: + + arm-trusted-firmware, at91bootstrap3, barebox, linux, opensbi, optee-os, + uboot: Add support for custom license files + config-fragments/autobuild: drop a number of duplicated toolchains + generate-cyclonedx: fix dependencies + Makefile: add check-package-external target + pkg-stats: add -N/--needs-update option + pkg-stats: fix RuntimeError with python 3.14 asyncio + relocate-sdk.sh: pre-calculate files in need of relocation + system/Config.in: do not reference md5 for sha256 option + testing/run-tests: specify multiprocessing method + testing: python-requests: new runtime test + testing: test_python.py: disable interpreter colors + testing/tests/package/test_firewalld: use ext2 instead of cpio + + Updated / fixed packages: asterisk, at91bootstrap3, avahi, berkeleydb, + bind, bitcoin, brltty, busybox, cryptsetup, dash, dc3dd, docker-engine, + easy-rsa, ell, expat, frr, glibc, gnutls, haproxy, + igmpproxy, intel-microcode, libcec, libcurl, libgphoto2, libgpiod2, + libite, libopenssl, libpng, libselinux, + libtasn1, libucl, libvpx, libwebsockets, linux, linux-headers, + linux-pam, localedef, lockdev, m4, manual, mcelog, mesa3d, mp4v2, + mpg123, mpir, mupdf, netdata, nginx, nodejs, php, php-lua, pkg-utils, + python3, python-django, python-jinja2, python-urllib3, rp-pppoe, + rust-bindgen, safeclib, screen, shadow, spandsp, strongswan, swig, + syslog-ng, tor, uclibc, uftp, util-linux, vim, webkitgtk, + wireless-regdb, xmlstarlet, zeek + + New package: libpam-pkcs11 + + Removed packages: criu, cvs, dbus-triggerd, dvdrw-tools, libsvg, libsvg-cairo, lockdev, gconf, + +2025.02.10, released January 20, 2026 + + Important / security related fixes: + + apache: CVE-2025-55753, CVE-2025-58098, CVE-2025-59775, CVE-2025-65082, + CVE-2025-66200 + cryptsetup + dropbear: CVE-2025-14282, CVE-2019-6111 + exim: CVE-2025-67896 + gnupg2 + imagemagick: CVE-2025-66628 + libarchive + libcoap: CVE-2025-59391, CVE-2025-65493, CVE-2025-65494 + CVE-2025-65495, CVE-2025-65496, CVE-2025-65497, CVE-2025-65498, + CVE-2025-65499, CVE-2025-65500, CVE-2025-65501 + libcurl: CVE-2025-13034, CVE-2025-14017, CVE-2025-14524, + CVE-2025-14819, CVE-2025-15079, CVE-2025-15224 + libfcgi: CVE-2025-23016. + libfreeimage: CVE-2019-12211, CVE-2019-12213, CVE-2020-24292, + CVE-2020-24293, CVE-2020-24295, CVE-2021-33367, CVE-2021-40263, + CVE-2021-40266, CVE-2023-47995, CVE-2023-47997 + libpng: CVE-2025-66293 + liburiparser: CVE-2025-67899 + libxslt: CVE-2025-7424, CVE-2025-9714, CVE-2025-11731 + linenoise: CVE-2025-9810 + perl: CVE-2025-40909 + php: CVE-2025-14177, CVE-2025-14178, CVE-2025-14180 + python-django: CVE-2025-13372, CVE-2025-64460 + python-filelock: CVE-2025-68146 + python-fonttools: CVE-2025-66034 + python-urllib3: CVE-2025-66471, CVE-2025-66418 + unbound: CVE-2025-11411 + vlc + xserver_xorg-server: CVE-2025-62229, CVE-2025-62230, + CVE-2025-62231 + xwayland: CVE-2025-62229, CVE-2025-62230, CVE-2025-62231 + + Infrastructure updates/fixes: + + - pkg-stats use HEAD request & unique HTTP user-agent + - cve-check: don't fail with unknown CVE + - generate-cyclonedx: support 'resolved_with_pedigree' + - testing: add host bin dir to PATH + - testing: add libiio python bindings runtime test + - testing: ddrescue: use dmsetup from lvm2 + - testing: ddrescue: use f-string for test config + - testing: add tio runtime test + - add 'CVE:' trailer in various patches + - add md5 hash and update tarball url to various python packages + - testing: ltp-testsuite: replace runltp by kirk + - testing: new kvmtool runtime test + - gitignore: ignore utils/brmake log output named `br.log` + - testing: add opus-tools runtime test + - testing: add flac runtime test + + Updated / fixed packages: apache, arm-trusted-firmware, atf, audit, + bitcoin, boost, busybox, cage, cmake, collectl, cppcms, cpulimit, + cryptsetup, dbus, dmraid, dropbear, embiggen-disk, evilwm, exim, ficl, + fontconfig, glibc, gnupg2, grpc, gvfs, imagemagick, kvmtool, ledmon, + libarchive, libcoap, libcpprestsdk, libcurl, libdill, libfcgi, + libfreeimage, libgit2, libgtk3, libgtk4, libiio, libmbus, libpng, + libselinux, libtirpc, libupnp, liburiparser, libxml2, libxslt, linenoise, + linux-tools, lttng-modules, lugaru, matchbox-fakekey, matchbox-keyboard, + matchbox-lib, matchbox-panel, mosh, nfs-utils, open-lldp, opencv4, + opencv4-contrib, openjdk, perl, perl-dbd-mysql, perl-mozilla-ca, php, pigz, + pixman, python-brotli, python-certifi, python-django, python-filelock, + python-fonttools, python-pyqt5, python-urllib3, qt5enginio, qt5webkit, + qt6base, racehound, rdesktop, rpcbind, rpi-firmware, softether, softhsm2, + spice, ssdp-responder, sway, sysprof, tio, trinity, tzdata, uboot, uclibc, + unbound, vim, vlc, xdriver_xf86-video-intel, xen, xinetd, + xlib_libxshmfence, xserver_xorg-server, xvkbd, xwayland, zic, zxing-cpp + + Removed packages: opencv3 'protobuf', opencv3 'ffmpeg' + +2025.02.9, released December 11, 2025 + + Important / security related fixes: + + - asterisk: CVE-2025-1131, CVE-2025-57767, CVE-2025-49832, + CVE-2025-47780, CVE-2025-47779 + - gnutls: CVE-2025-9820 + - libpng: CVE-2025-64505, CVE-2025-64506, CVE-2025-64720, CVE-2025-65018 + - luksmeta: CVE-2025-11568 + - mariadb: CVE-2025-30693, CVE-2025-30722, CVE-2023-52969, + CVE-2023-52970, CVE-2023-52971 + - openvpn: CVE-2025-13086 + - postgresql: CVE-2025-12817, CVE-2025-12818 + - python-django: CVE-2025-64458, CVE-2025-64459 + - python-startlette: GHSA-7f5h-v6xp-fcq8 + + Infrastructure updates/fixes: + + - New script support/scripts/cve-check to enricht CycloneDX SBoM with + CVE information from NVD database. + + Updated / fixed packages: 18xx-ti-utils, asterisk, gnutls, libpng, + libroxml, libteam, linux-headers, luksmeta, mariadb, nbd, neard, + openjdk, openjdk-bin, openvpn, oprofile, perl-net-ssleay, postgresql, + python-django, python-starlette, redis, sdbusplus, sdl, swipl, + tailscale, thermald, tmux, tor + + Removed packages: bctoolbox, belle-sip, belr, linphone, mediastreamer, + mongrel2, ortp + +2025.02.8, released November 20, 2025 + + Important / security related fixes: + + - bind: CVE-2025-8677, CVE-2025-40778, CVE-2025-40780 + - dante: CVE-2024-54662 + - erlang: CVE-2024-53846, CVE-2025-4748, CVE-2025-26618, CVE-2025-30211, + CVE-2025-32433, CVE-2025-46712, CVE-2025-48038, + CVE-2025-48039, CVE-2025-48040, CVE-2025-48041 + - hostapd: CVE-2025-24912 + - imagemagick: CVE-2025-62171 + - iptraf-ng: CVE-2024-52949 + - libarchive: CVE-2025-25724 + - libglib2: CVE-2024-54662 + - libvips: CVE-2025-29769, CVE-2025-59933 + - libvpx: CVE-2025-5283 + - libxslt: CVE-2025-24855, CVE-2024-55549 + - mbedtls: CVE-2025-54764, CVE-2025-59438 + - modsecurity2: CVE-2025-52891, CVE-2025-54571 + - netdata: CVE-2023-22496, CVE-2023-22497 + - poppler: CVE-2024-6239, CVE-2024-56378, CVE-2025-32364, + CVE-2025-32365, CVE-2025-43903, CVE-2025-50420, + CVE-2025-52886 + - python3: gh-139312, gh-139700, gh-139400, gh-135661, gh-135661, + gh-102555, gh-135462, gh-118350, gh-86155 + - python-webpy: CVE-2025-3818 + - redis: CVE-2025-46817, CVE-2025-46818, CVE-2025-46819, CVE-2025-49844 + - samba: CVE-2025-3818, CVE-2025-10230 + - shairport-sync: Upstream security fixes without CVE + - squid: CVE-2025-59362 + - suricata: CVE-2024-37151, CVE-2024-38535 + - tpm2-tss: CVE-2024-29040 + - xerces: CVE-2024-23807 + - zabbix: CVE-2025-27231, CVE-2025-27236, CVE-2025-27238, CVE-2025-49641 + - zip: CVE-2018-13410 + + Infrastructure updates/fixes: + + - Improved matching of CPE ID with NVD database, resulting in more + accurate identification of CVEs. + - brmake: avoid garbled output with top-level parallel build + + Updated / fixed packages: 4th, audit, bind, cmake, crun, dante, + ebtables, erlang, freeradius-server, gpsd, gstd, hostapd, imagemagick, + iptraf-ng, iozone, ledmon, libarchive, libcurl, libdbi-drivers, + libdisplay-info, libglib2, libgphoto2, libgtk3, libheif, libsemanage, + libshout, libsolv, libtpms, libvips, libvpx, libwpe, libxslt, linux, + linux-headers, live555, mbedtls, micropython, mjpg-streamer, + modsecurity2, netdata, netsnmp, poppler, python3, python-flask-cors, + python-webpy, quota, qt6multimedia, redis, refpolicy, samba4, + selinux-python, sexpect, shairport-sync, siproxd, sqlite, squid, + suricata, tor, tpm2-tss, waffle, webkitgtk, wireless-regdb, wpewebkit, + xerces, zabbix, zip + + Removed package: ramspeed + + Boards updated / fixed: beagleboneai, cubieboard1, cubieboard2, + stm32f429_disco_xip, stm32f746_disco_sd, stm32f769_disco_sd, + + Test Improvements: + + - Capture output of failing commands on host. + +2025.02.7, released October 11, 2025 + + Important / security related fixes: + + - asterisk: CVE-2024-42491 + - atop: CVE-2025-31160 + - civetweb: CVE-2025-55763 + - cjson: CVE-2025-57052 + - connman: CVE-2025-32366, CVE-2025-32743 + - cups: CVE-2025-58060, CVE-2025-58364 + - exiv2: CVE-2023-44398, CVE-2024-24826, CVE-2024-25112, CVE-2024-39695, + CVE-2025-26623, CVE-2025-54080, CVE-2025-55304 + - expat: CVE-2025-59375 + - fastd: CVE-2025-24356 + - fetchmail: CVE-2025-61962 + - ghostscript: CVE-2025-59798, CVE-2025-59799, CVE-2025-59800, CVE-2025-59801 + - imagemagick: CVE-2023-5341, CVE-2025-55004, CVE-2025-55005, CVE-2025-55160 + - intel-microcode: CVE-2025-20053, CVE-2025-20109, CVE-2025-22839, + CVE-2025-22840, CVE-2025-22889, CVE-2025-26403 + - jasper: CVE-2023-51257, CVE-2025-8835 + - libcurl: CVE-2025-10148, CVE-2025-9086 + - libopenssl: CVE-2025-9230, CVE-2025-9231, CVE-2025-9232 + - libssh: CVE-2025-8114, CVE-2025-8277 + - lua: CVE-2014-5461 + - opencv4: CVE-2025-53644 + - pcre2: CVE-2025-58050 + - poco: CVE-2025-6375 + - postgresql: CVE-2025-8713, CVE-2025-8714, CVE-2025-8715 + - python-django: CVE-2025-57833, CVE-2025-59681, CVE-2025-59682 + - python-flask-cors: CVE-2024-6839, CVE-2024-6844, CVE-2024-6866 + - python-pip: CVE-2025-8869 + - raptor: CVE-2024-57822, CVE-2024-57823 + - sqlite: CVE-2025-6965 + - syslog-ng: CVE-2024-47619 + - tiff: CVE-2024-13978, CVE-2025-8961, CVE-2025-9165 + - udisks: CVE-2025-8067 + - webkitgtk: CVE-2025-24189, CVE-2025-31273, CVE-2025-31278, CVE-2025-43211, + CVE-2025-43212, CVE-2025-43216, CVE-2025-43227, CVE-2025-43228, + CVE-2025-43240, CVE-2025-43265, CVE-2025-6558 + - wireshark: CVE-2025-5601 + + Updated / fixed packages: asterisk, atop, boinc, civetweb, cjson, + connman, cpp-httplib, cups, cutekeyboard, ecryptfs-utils, exiv2, expat, + fastd, fetchmail, ghostscript, gnupg2, gnuplot, htpdate, imagemagick, + intel-microcode, iputils, jasper, jose, kodi, libcurl, libopenssl, + libssh, libxkbcommon, libxmlrpc, linux-firmware, linux-headers, + linuxptp, llvm-project, lua, luaossl, luvi, mariadb, micropython, + modsecurity2, opencv4, opencv4-contrib, openjpeg, pango, pcre2, poco, + postgresql, python-certifi, python-cryptography, python-django, + python-flask-cors, python-pip, python-pyopenssl, python-pytz, raptor, + rtl_433, ruby, samba4, sqlite, syslog-ng, sysprof, tiff, tor, uclibc, + udisks, upx, webkitgtk, wireshark, wlroots, x11r7, zziplib + + Removed package: netstat-nat + + Boards updated / fixed: beagleboneai, qemu/{x86, x86_64}, ti_am62x_sk + versal, zedboard + + Boards removed: roseapplepi, atmel_sama5d3xek, at91sam9260eknf + + Test Improvements: + + - TestSWIPL: increase timeout value + - TestOpenJdk: remove stime() function call + - test_hardening: update toolchain to aarch64 for checksec tests + - test_docker_compose: update kernel & VM CPU + - TestZfsUclibc: use internal backend for uClibc-ng toolchain + - GitTestBase: remove git daemon due to Gitlab-CI security settings + +2025.02.6, released September 09, 2025 + + Important / security related fixes: + + - libssh: CVE-2025-4878, CVE-2025-5318, CVE-2025-5351, CVE-2025-5372, + CVE-2025-5449, CVE-2025-5987 + - glibc: CVE-2025-5702, CVE-2025-5745, CVE-2025-8058 + - gnutls: CVE-2025-32989, CVE-2025-32988, CVE-2025-32990, CVE-2025-6395 + - python3: CVE-2025-8194 + - libhtp: CVE-2025-53537 + - tiff: CVE-2025-8176, CVE-2025-8177 + - libglib2: CVE-2025-6052 + - ofono: CVE-2023-2794, CVE-2024-7537, CVE-2024-7539, CVE-2024-7540, + CVE-2024-7541, CVE-2024-7542 + - elfutils: CVE-2025-1352, CVE-2025-1365, CVE-2025-1371, CVE-2025-1372, + CVE-2025-1376, CVE-2025-1377 + - grub2: CVE-2024-45777, CVE-2024-45778, CVE-2024-45779, + CVE-2024-45780, CVE-2024-45782, CVE-2024-56737, CVE-2024-56738, + CVE-2025-0678, CVE-2025-0684, CVE-2025-0685, CVE-2025-0686, + CVE-2025-0689, CVE-2025-1125 + - openjpeg: CVE-2025-54874 + - go: CVE-2025-4674, CVE-2025-47907 + - gst1-plugins-base: CVE-2025-47806, CVE-2025-47807 + - gst1-plugins-good: CVE-2025-47219, CVE-2025-47183 + - vorbis-tools: CVE-2023-43361 + - quickjs: CVE-2025-46688 + - libde265: CVE-2024-38949, CVE-2024-38950 + - vim: CVE-2024-41957, CVE-2024-41965, CVE-2024-45306, CVE-2024-47814, + CVE-2025-1215, CVE-2025-22134, CVE-2025-24014, CVE-2025-26603, + CVE-2025-29768, CVE-2025-53905, CVE-2025-53906 + - ffmpeg: CVE-2023-6602 + - lighttpd: CVE-2025-8671 + - python-h2: CPE-2025-57804 + - cpp-httplib: CVE-2025-46728 + - iperf3: CVE-2025-54349, CVE-2025-54350 + + Removed package: liboauth, thttpd + + Removed defconfig: at91sam9g20dfc, at91sam9g45m10ek, + at91sam9rlek, bananapro, beelink_gs1, chromebook_snow, galileo, + odroidxu4, orangepi_lite2, orangepi_one_plus, pcengines_apu2, + pine64_sopine, riotboard, rock64, rock_pi_n8, socrates_cyclone5, + toradex_apalis_imx6, ts7680, engicam_imx6*, kontron_pitx_imx8m, imx6ulz_bsh_smm_m2, + + Test Improvements: + + - test_gstreamer1: raise tesseract-ocr timeout to 15s + - test_wine: fix test after bootlin toolchains update + - test_numactl: fix test after bootlin toolchains update + - test_dpdk: fix test after bootlin toolchains update + - test_msr_tools: fix test after bootlin toolchains update + - test_dmidecode: fix test after bootlin toolchains update + - test_iso9660: use a more recent toolchain + - test_gruby: use glibc toolchain + - test_wget: replace thttpd by Busybox's httpd server + - test_libcurl: replace thttpd by Busybox's httpd server + - test_systemd_selinux: fix test after bootlin toolchains update + + Updated / fixed packages: python-propcache, pipewire, apache, xinetd, + libssh, glibc, libhtp, libapparmor, php-pecl-dbus, tini, snooze, ngrep, + libzenoh-pico, janet, nanocom, rtl8189es, gcc, ofono, python-numpy, + elfutils, libtracefs, tinyssh, start-stop-daemon, bcusdk, prboom, + setserial, grub2, openjpeg, go, gstreamer1, gst1-plugins-base, + gst1-plugins-good, gst1-plugins-bad, gst1-plugins-ugly, gst1-devtools, + gst1-libav, gst1-python, gst1-rtsp-server, gst1-vaapi, + gstreamer1-editing-services, vorbis-tools, quickjs, libde265, vim, + ffmpeg, libv4l, python-yarl, lirc-tools, b43-firmware, tcpreplay, + libsvgtiny, libsoxr, lighttpd, uclibc, vde2, libcap-ng, python-h2, + squid, ipmitool, ell, proftpd, liblog4c-localtime, wpewebkit, weston, + cpp-httplib, ipset, iperf3 + + Infrastructure updates/fixes: + - Various tweaks to utils/generate-cyclonedx for better SBOM + compatibility and project name/version customization + - go: make pre-built compiler provide target support too + - test-pkg: add new option -T/--toolchain-name + - pkg-utils.mk: include package directory in show-info output + - bump-stable-kernel-versions: new tool + + Boards updated / fixed: + + - qemu_sh4*: switch back to disk emulation + - acmesystems_acqua_a5_*: update linux + - sipeed_licheepi_zero: update linux & uboot + - zynqmp: increase vfat partition to 64M + - qemu_{arm,aarch64}_{ebbr,sbsa}*: linux needs host python3 + - canaan_kd233, sipeed*: use BR2_LINUX_KENREL_IMAGE_TARGET_NAME + - ci20: U-Boot needs host-openssl + 2025.02.5, released August 11, 2025 Important / security related fixes: diff --git a/Config.in b/Config.in index d730f2034b2..208aa476dad 100644 --- a/Config.in +++ b/Config.in @@ -97,11 +97,6 @@ config BR2_HOST_GCC_AT_LEAST_15 # When adding new entries above, be sure to update # the HOSTCC_MAX_VERSION variable in the Makefile. -# Hidden boolean selected by packages in need of Java in order to build -# (example: kodi) -config BR2_NEEDS_HOST_JAVA - bool - # Hidden boolean selected by pre-built packages for x86, when they # need to run on x86-64 machines (example: pre-built external # toolchains, binary tools, etc.). @@ -335,6 +330,22 @@ config BR2_LUAROCKS_MIRROR See http://luarocks.org +config BR2_GOPROXY + string "Go module proxy" + default "https://proxy.golang.org,direct" + depends on BR2_PACKAGE_HOST_GO_TARGET_ARCH_SUPPORTS + help + The Go module proxy URL used to download Go modules. By + default, it uses the official Go module mirror, falling back + to direct downloads if the module is not found in the mirror. + + The value can be one of: + - Comma-separated list of proxy URLs + - "off" to disable all downloads + - "direct" to download directly from source repositories + + See https://go.dev/ref/mod#module-proxy + config BR2_CPAN_MIRROR string "CPAN mirror (Perl packages)" default "https://cpan.metacpan.org" diff --git a/Config.in.legacy b/Config.in.legacy index 0bedc24dce1..13ec9375a9f 100644 --- a/Config.in.legacy +++ b/Config.in.legacy @@ -144,8 +144,1224 @@ endif ############################################################################### +comment "Legacy options removed in 2026.11" + +config BR2_TARGET_EDK2_PLATFORM_ARM_SGI575 + bool "EDK2 platform ARM SGI-575 has been removed" + select BR2_LEGACY + help + The EDK2 platform configuration for ARM SGI-575 has been + removed. + +config BR2_PACKAGE_IFENSLAVE + bool "ifenslave" + select BR2_LEGACY + help + ifenslave has been removed. Its feature is otherwise + available from iproute2 or as a Busybox applet + +config BR2_PACKAGE_SZIP + bool "szip has been removed" + select BR2_LEGACY + select BR2_PACKAGE_LIBAEC + help + The szip package has been removed, as it is no longer + maintained upstream. libaec, which provides a drop-in + replacement libsz library, has been selected instead. + +config BR2_PACKAGE_PYTHON3_2TO3 + bool "python module 2to3 has been removed" + select BR2_LEGACY + help + The python module 2to3 has been removed upstream + +config BR2_PACKAGE_LIBCPPRESTSDK + bool "libcpprestsdk has been removed" + select BR2_LEGACY + help + libcpprestsdk is unmaintained and has been removed + +config BR2_PACKAGE_HEIRLOOM_MAILX + bool "heirloom-mailx has been removed" + select BR2_LEGACY + help + The heirloom-mailx package has been removed because it is + incompatible with OpenSSL >= 4.x + +config BR2_PACKAGE_NXP_BT_WIFI_FIRMWARE_8801 + bool "nxp-bt-wifi-firmware 8801 support removed" + select BR2_LEGACY + help + The 8801 firmware is no longer available in the selected NXP + firmware release. + +config BR2_PACKAGE_NXP_BT_WIFI_FIRMWARE_8997 + bool "nxp-bt-wifi-firmware 8997 support removed" + select BR2_LEGACY + help + The 8997 firmware is no longer available in the selected NXP + firmware release. + +config BR2_PACKAGE_NXP_BT_WIFI_FIRMWARE_8997_SD + bool "nxp-bt-wifi-firmware 8997 SD support removed" + select BR2_LEGACY + help + The 8997 firmware is no longer available in the selected NXP + firmware release. + +config BR2_PACKAGE_NXP_BT_WIFI_FIRMWARE_8997_PCIE + bool "nxp-bt-wifi-firmware 8997 PCIe support removed" + select BR2_LEGACY + help + The 8997 firmware is no longer available in the selected NXP + firmware release. + +config BR2_PACKAGE_NXP_BT_WIFI_FIRMWARE_IW610 + bool "nxp-bt-wifi-firmware IW610 option renamed" + select BR2_PACKAGE_NXP_BT_WIFI_FIRMWARE_IW610_SD + select BR2_LEGACY + help + The IW610 firmware option was renamed to distinguish SD and + USB interfaces. + +config BR2_BINUTILS_VERSION_2_44_X + bool "binutils 2.44 has been removed" + select BR2_LEGACY + help + binutils 2.44 has been removed, select a newer version + instead. + +config BR2_KERNEL_HEADERS_7_1 + bool "kernel headers version 7.1.x are no longer supported" + select BR2_LEGACY + help + Version 7.1.x of the Linux kernel headers are no longer + maintained upstream and are now removed. + +config BR2_PACKAGE_WESTON_SCREENSHARE + bool "weston screenshare option removed" + select BR2_LEGACY + help + Weston screenshare option was removed in v16.0.0. + +config BR2_PACKAGE_WESTON_SHELL_FULLSCREEN + bool "weston fullscreen shell removed" + select BR2_LEGACY + help + Weston fullscreen shell option was removed in v16.0.0. + +config BR2_PACKAGE_LIBPLATFORM + bool "libplatform removed" + select BR2_LEGACY + help + libplatform was no longer maintained upstream, so it has + been dropped. + +comment "Legacy options removed in 2026.08" + +config BR2_PACKAGE_FLUIDSYNTH_SDL2 + bool "fluidsynth sdl2 audio support removed" + select BR2_LEGACY + help + FluidSynth SDL2 audio support was removed in v2.5.0. + +config BR2_PACKAGE_HOSTAPD_DRIVER_HOSTAP + bool "hostapd hostap driver removed" + select BR2_LEGACY + help + The hostap driver was removed from hostapd. + +config BR2_GDB_VERSION_ARC + bool "ARC-specific gdb version removed" + select BR2_LEGACY + help + Support for the ARC-specific gdb version was removed, as it + was no longer maintained in Buildroot. + +config BR2_BINUTILS_VERSION_ARC + bool "ARC-specific binutils version removed" + select BR2_LEGACY + help + Support for the ARC-specific binutils version was removed, + as it was no longer maintained in Buildroot. + +config BR2_GCC_VERSION_ARC + bool "ARC-specific gcc version removed" + select BR2_LEGACY + help + Support for the ARC-specific gcc version was removed, as it + was no longer maintained in Buildroot. + +config BR2_TOOLCHAIN_EXTERNAL_SYNOPSYS_ARC + bool "Synopsys ARC toolchain removed" + select BR2_LEGACY + help + The Synopsys ARC external toolchain has been removed, as it + was no longer maintained in Buildroot. + +config BR2_PACKAGE_TS4900_FPGA + bool "ts4900-fpga removed" + select BR2_LEGACY + help + The ts4900 defconfig was removed, so ts4900-fpga package + has been dropped. + +config BR2_GDB_VERSION_14 + bool "gdb 14.x has been removed" + select BR2_LEGACY + help + GDB 14.x support has been removed, a newer version should be + used instead. + +config BR2_PACKAGE_ARGPARSE + bool "argparse has been removed" + select BR2_LEGACY + select BR2_PACKAGE_LUA_ARGPARSE + help + Package argparse duplicates the package lua-argparse. + +config BR2_KERNEL_HEADERS_7_0 + bool "kernel headers version 7.0.x are no longer supported" + select BR2_LEGACY + help + Version 7.0.x of the Linux kernel headers are no longer + maintained upstream and are now removed. + +config BR2_PACKAGE_BLUEZ5_UTILS_PLUGINS_SAP + bool "bluez sap plugin removed" + select BR2_LEGACY + help + Build plugin for SAP profile. + +config BR2_PACKAGE_BLUEZ5_UTILS_PLUGINS_HEALTH + bool "bluez health plugin removed" + select BR2_LEGACY + help + Build plugin for health profiles. + +config BR2_GCC_VERSION_13_X + bool "gcc 13.x support removed" + select BR2_LEGACY + help + Support for building a toolchain based on GCC 13.x has been + removed, chose a newer GCC version instead. + +config BR2_PACKAGE_QEMU_TARGET_MICROBLAZEEL + bool "qemu target microblazeel removed" + select BR2_PACKAGE_QEMU_TARGET_MICROBLAZE + select BR2_LEGACY + help + Version 11.0.0 of qemu folded microblazeel support into + the microblaze target. + +comment "Legacy options removed in 2026.05" + +config BR2_PACKAGE_PTPD2 + bool "ptpd2 removed" + select BR2_LEGACY + help + ptpd2 was no longer maintained upstream, so it has been + dropped. + +config BR2_PACKAGE_LIBHDHOMERUN + bool "libhdhomerun" + select BR2_LEGACY + help + libhdhomerun was removed from Buildroot as it was + insufficiently maintained. It can be re-added if someone + volunteers to maintain it. + +config BR2_PACKAGE_KODI_PVR_HDHOMERUN + bool "kodi-pvr-hdhomerun" + select BR2_LEGACY + help + kodi-pvr-hdhomerun was removed from Buildroot as it was + insufficiently maintained. It can be re-added if someone + volunteers to maintain it. + +config BR2_PACKAGE_ZEEK + bool "zeek removed" +# select BR2_LEGACY + help + The zeek package was not maintained, with numerous build + issues and severely lagging behind upstream. so it has been + dropped. + +config BR2_PACKAGE_PIGPIO + bool "pigpio removed" + select BR2_LEGACY + help + pigpio was no longer maintained upstream, so it has been + dropped. + +config BR2_PACKAGE_XML_SECURITY_C + bool "xml-security-c removed" + select BR2_LEGACY + help + xml-security-c was no longer maintained upstream, so it has + been dropped. + +config BR2_PACKAGE_LIBPHIDGET + bool "libphidget" + select BR2_LEGACY + help + libphidget was removed from Buildroot as it was + insufficiently maintained. It can be re-added if someone + volunteers to maintain it. + +config BR2_PACKAGE_PHIDGETWEBSERVICE + bool "phidgetwebservice" + select BR2_LEGACY + help + phidgetwebservice was removed from Buildroot as it was + insufficiently maintained. It can be re-added if someone + volunteers to maintain it. + +config BR2_PACKAGE_DAQ + bool "daq removed" +# select BR2_LEGACY + help + The only dependee, snort, has been removed. Look at daq3 + for an alternative. + +config BR2_PACKAGE_FWTS_EFI_RUNTIME_MODULE + bool "fwts efi_runtime kernel module removed" + select BR2_LEGACY + help + The fwts efi_runtime module has been removed in V26.01.00. + The Kernel efi_test (Kernel CONFIG_EFI_TEST) should be used + instead. + +config BR2_KERNEL_HEADERS_6_19 + bool "kernel headers version 6.19.x are no longer supported" + select BR2_LEGACY + help + Version 6.19.x of the Linux kernel headers are no longer + maintained upstream and are now removed. + +config BR2_PACKAGE_PCRE + bool "pcre removed" +# select BR2_LEGACY + help + pcre was no longer maintained upstream, so it has been + dropped. Look at pcre2 for an alternative. + +config BR2_PACKAGE_SNORT + bool "snort removed" +# select BR2_LEGACY + help + snort was no longer maintained upstream, so it has been + dropped. Look at snort3 for an alternative. + +config BR2_PACKAGE_CEGUI + bool "cegui" + select BR2_LEGACY + help + cegui was removed from Buildroot as it was insufficiently + maintained. It can be re-added if someone volunteers to + maintain it. + +config BR2_PACKAGE_SPHINXBASE + bool "sphinxbase removed" + select BR2_LEGACY + help + sphinxbase was no longer maintained upstream, so it has + been dropped. + +config BR2_PACKAGE_OPENSWAN + bool "openswan removed" + select BR2_LEGACY + help + Openswan was no longer maintained upstream, so it has + been dropped. + +config BR2_PACKAGE_RUBIX + bool "rubix removed" + select BR2_LEGACY + help + Rubix was no longer maintained upstream, so it has + been dropped. + +config BR2_PACKAGE_LLAMA_CPP_SERVER + bool "llama-cpp option removed" + select BR2_PACKAGE_LLAMA_CPP_TOOLS + select BR2_LEGACY + help + Several tools (server, cli) now require building both + tools and server, so enable both with the same config + BR2_PACKAGE_LLAMA_CPP_TOOLS + +config BR2_PACKAGE_PYTHON3_OSSAUDIODEV + bool "python3 ossaudiodev module removed" + select BR2_LEGACY + help + The ossaudiodev module was removed in Python 3.13. + +config BR2_TARGET_EDK2_PLATFORM_OVMF_I386 + bool "EDK2 OVMF IA32 removed" + select BR2_LEGACY + help + EDK2 OVMF IA32 support was removed in upstream version + 202511, so it has been dropped. + +config BR2_BINUTILS_VERSION_2_43_X + bool "binutils 2.43 has been removed" + select BR2_LEGACY + help + binutils 2.43 has been removed, select a newer version + instead. + +config BR2_parisc10 + bool "PA-RISC architecture version 1.0 support removed" + select BR2_LEGACY + help + Following the build issues with glibc 2.43, Buildroot has + removed support for this architecture version. + +comment "Legacy options removed in 2026.02" + +config BR2_PACKAGE_QEMU_TARGET_CRIS + bool "qemu cris support has been removed" + select BR2_LEGACY + help + CRIS support has been removed since Qemu 9.2.0. + +config BR2_PACKAGE_DVDRW_TOOLS + bool "dvdrw-tools removed" + select BR2_LEGACY + help + dvdrw-tools was no longer maintained upstream, so it has + been dropped. + +config BR2_PACKAGE_PHP_ZMQ + bool "php-zmq removed" + select BR2_LEGACY + help + php-zmq was no longer maintained upstream, broken with php + 8.5, so it has been dropped. + +config BR2_PACKAGE_LOCKDEV + bool "lockdev removed" + select BR2_LEGACY + help + lockdev was no longer maintained upstream, so it has been + dropped. + +config BR2_PACKAGE_DBUS_TRIGGERD + bool "dbus-triggerd removed" + select BR2_LEGACY + help + dbus-triggerd was no longer maintained upstream, so it has + been dropped. + +config BR2_PACKAGE_CVS + bool "cvs has been removed" + select BR2_LEGACY + help + The cvs project was no longer maintained upstream, broken + with GCC 14.x, so it was removed. + +config BR2_PACKAGE_CRIU + bool "criu has been removed" + select BR2_LEGACY + help + criu was removed from Buildroot as it was insufficiently + maintained. It can be re-added if someone volunteers to + maintain it. + +config BR2_PACKAGE_GCONF + bool "gconf package removed" + select BR2_LEGACY + help + gconf was no longer maintained upstream, so it has been + dropped. + +config BR2_PACKAGE_LIBSVG + bool "libsvg package removed" + select BR2_LEGACY + help + The libsvg package has been removed. Its latest upstream + release was from 2005, it was incompatible with recent + libxml2 versions, and it wasn't used by any other Buildroot + package except libsvg-cairo, also removed. + +config BR2_PACKAGE_LIBSVG_CAIRO + bool "libsvg-cairo package removed" + select BR2_LEGACY + help + The libsvg-cairo package has been removed. Its latest + upstream release was from 2005, and it wasn't used by any + other Buildroot package. + +config BR2_PACKAGE_XDRIVER_XF86_INPUT_MOUSE + bool "xf86-input-mouse removed" + select BR2_LEGACY + help + Linux support was removed upstream in version + 2.0.0. Upstream recommends to switch to xf86-input-evdev or + xf86-input-libinput. + +config BR2_PACKAGE_HOST_JSMIN + bool "host-jsmin has been removed" + select BR2_LEGACY + help + JSMin is no longer maintained and better alternative + exists since then. + +config BR2_PACKAGE_JSMIN + bool "jsmin has been removed" + select BR2_LEGACY + help + JSMin is no longer maintained and better alternative + exists since then. + +config BR2_PACKAGE_VUEJS_ROUTER + bool "vuejs-router has been removed" + select BR2_LEGACY + help + JS libraries are no longer part of Buildroot packages. + +config BR2_PACKAGE_VUEJS + bool "vuejs has been removed" + select BR2_LEGACY + help + JS libraries are no longer part of Buildroot packages. + +config BR2_PACKAGE_VIS_NETWORK + bool "vis-network has been removed" + select BR2_LEGACY + help + JS libraries are no longer part of Buildroot packages. + +config BR2_PACKAGE_OPENLAYERS + bool "openlayers has been removed" + select BR2_LEGACY + help + JS libraries are no longer part of Buildroot packages. + +config BR2_PACKAGE_JSZIP + bool "jszip has been removed" + select BR2_LEGACY + help + JS libraries are no longer part of Buildroot packages. + +config BR2_PACKAGE_JSON_JAVASCRIPT + bool "json-javascript has been removed" + select BR2_LEGACY + help + JS libraries are no longer part of Buildroot packages. + +config BR2_PACKAGE_JQUERY_VALIDATION + bool "jquery-validation has been removed" + select BR2_LEGACY + help + JS libraries are no longer part of Buildroot packages. + +config BR2_PACKAGE_JQUERY_UI_THEMES + bool "jquery-ui-themes has been removed" + select BR2_LEGACY + help + JS libraries are no longer part of Buildroot packages. + +config BR2_PACKAGE_JQUERY_UI + bool "jquery-ui has been removed" + select BR2_LEGACY + help + JS libraries are no longer part of Buildroot packages. + +config BR2_PACKAGE_JQUERY_SPARK + bool "jquery-spark has been removed" + select BR2_LEGACY + help + JS libraries are no longer part of Buildroot packages. + +config BR2_PACKAGE_JQUERY_SIDEBAR + bool "jquery-sidebar has been removed" + select BR2_LEGACY + help + JS libraries are no longer part of Buildroot packages. + +config BR2_PACKAGE_JQUERY_MOBILE + bool "jquery-mobile has been removed" + select BR2_LEGACY + help + JS libraries are no longer part of Buildroot packages. + +config BR2_PACKAGE_JQUERY_KEYBOARD + bool "jquery-keyboard has been removed" + select BR2_LEGACY + help + JS libraries are no longer part of Buildroot packages. + +config BR2_PACKAGE_JQUERY_DATETIMEPICKER + bool "jquery-datetimepicker has been removed" + select BR2_LEGACY + help + JS libraries are no longer part of Buildroot packages. + +config BR2_PACKAGE_JQUERY + bool "jquery has been removed" + select BR2_LEGACY + help + JS libraries are no longer part of Buildroot packages. + +config BR2_PACKAGE_FORGE + bool "forge has been removed" + select BR2_LEGACY + help + JS libraries are no longer part of Buildroot packages. + +config BR2_PACKAGE_FLOT + bool "flot has been removed" + select BR2_LEGACY + help + JS libraries are no longer part of Buildroot packages. + +config BR2_PACKAGE_EXPLORERCANVAS + bool "explorercanvas has been removed" + select BR2_LEGACY + help + JS libraries are no longer part of Buildroot packages. + +config BR2_PACKAGE_DATATABLES_RESPONSIVE + bool "datatables-responsive has been removed" + select BR2_LEGACY + help + JS libraries are no longer part of Buildroot packages. + +config BR2_PACKAGE_DATATABLES_FIXEDCOLUMNS + bool "datatables-fixedcolumns has been removed" + select BR2_LEGACY + help + JS libraries are no longer part of Buildroot packages. + +config BR2_PACKAGE_DATATABLES_BUTTONS + bool "datatables-buttons has been removed" + select BR2_LEGACY + help + JS libraries are no longer part of Buildroot packages. + +config BR2_PACKAGE_DATATABLES + bool "datatables has been removed" + select BR2_LEGACY + help + JS libraries are no longer part of Buildroot packages. + +config BR2_PACKAGE_CHARTJS + bool "chartjs has been removed" + select BR2_LEGACY + help + JS libraries are no longer part of Buildroot packages. + +config BR2_PACKAGE_BOOTSTRAP + bool "bootstrap has been removed" + select BR2_LEGACY + help + JS libraries are no longer part of Buildroot packages. + +config BR2_PACKAGE_SOFTETHER + bool "softether has been removed" + select BR2_LEGACY + help + The version packaged in Buildroot version was outdated + compared to upstream and no longer maintained by anyone + listed in the DEVELOPERS file. + +config BR2_PACKAGE_RPI_USERLAND + bool "rpi-userland has been removed" + select BR2_LEGACY + help + According to https://github.com/raspberrypi/userland, "This + repo is ancient and deprecated. [...] If you are using code + from here you should rethink your solution.". + +config BR2_PACKAGE_GST1_PLUGINS_BASE_LIB_OPENGL_DISPMANX + bool "gst1-plugins-base dispmanx option removed" + select BR2_LEGACY + help + Due to the removal of the rpi-userland package, the dispmanx + OpenGL plug-in from GStreamer plugin base has been removed. + +config BR2_PACKAGE_RPI_FIRMWARE_INSTALL_VCDBG + bool "rpi-firmware vcdbg option removed" + select BR2_LEGACY + help + rpi-firmware upstream has dropped the vcdbg tool + +config BR2_PACKAGE_LIBDNET_PYTHON + bool "libdnet python module removed" + select BR2_LEGACY + help + The libdnet Python module is no longer compatible with + Python >= 3.13, so it had to be removed. + +config BR2_PACKAGE_LIBFREEIMAGE + bool "libfreeimage" + select BR2_LEGACY + help + libfreeimage is unmaintained and has been removed + +config BR2_PACKAGE_OPENCV3 + bool "opencv3" + select BR2_LEGACY + help + opencv3 is unmaintained and has been removed + +config BR2_PACKAGE_VLC_OPENCV3_BACKEND + bool "opencv3 support in vlc has been removed" + select BR2_LEGACY + help + OpenCV3 support in VLC has been reported, as OpenCV has been + removed. + +config BR2_PACKAGE_CPPDB + bool "cppdb has been removed" + select BR2_LEGACY + help + cppdb was no longer maintained upstream, and therefore was + removed. + +config BR2_PACKAGE_PYTHON_AIOREDIS + bool "python-aioredis has been removed" + select BR2_LEGACY + select BR2_PACKAGE_PYTHON_REDIS + help + python-aioredis was abandoned upstream and replaced by + python-redis + +config BR2_PACKAGE_LIBCUEFILE + bool "libcuefile has been removed" + select BR2_LEGACY + help + libcuefile is unmaintained and has been removed + +config BR2_PACKAGE_MPD_MUSEPACK + bool "musepack support in mpd has been removed" + select BR2_LEGACY + help + musepack package is unmaintained and has been removed + +config BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_MUSEPACK + bool "musepack support in gst1-plugins-bad has been removed" + select BR2_LEGACY + help + musepack package is unmaintained and has been removed + +config BR2_PACKAGE_MUSEPACK + bool "musepack has been removed" + select BR2_LEGACY + help + musepack is unmaintained and has been removed + +config BR2_PACKAGE_RACEHOUND + bool "racehound has been removed" + select BR2_LEGACY + help + racehound is unmaintained and has been removed + +config BR2_PACKAGE_TASKD + bool "taskd has been removed" + select BR2_LEGACY + help + taskd was deprecated upstream and has been removed + +config BR2_PACKAGE_SCONESERVER + bool "sconeserver has been removed" + select BR2_LEGACY + help + sconeserver is unmaintained and has been removed + +config BR2_PACKAGE_QJSON + bool "qjson has been removed" + select BR2_LEGACY + help + qjson was deprecated upstream and has been removed + +config BR2_PACKAGE_OPENTRACING_CPP + bool "opentracing-cpp has been removed" + select BR2_LEGACY + help + opentracing-cpp was deprecated upstream and has been removed + +config BR2_PACKAGE_OPENPOWERLINK + bool "openpowerlink has been removed" + select BR2_LEGACY + help + openpowerlink is unmaintained and has been removed + +config BR2_PACKAGE_ALURE + bool "alure has been removed" + select BR2_LEGACY + help + alure is unmaintained and has been removed + +config BR2_PACKAGE_LIBUWSC + bool "libuwsc has been removed" + select BR2_LEGACY + help + libuwsc is unmaintained and has been removed + +config BR2_PACKAGE_LIBIQRF + bool "libiqrf has been removed" + select BR2_LEGACY + help + libiqrf is unmaintained and has been removed + +config BR2_PACKAGE_LIBCGI + bool "libcgi has been removed" + select BR2_LEGACY + help + libcgi is unmaintained and has been removed + +config BR2_PACKAGE_LET_ME_CREATE + bool "let-me-create has been removed" + select BR2_LEGACY + help + let-me-create is unmaintained and has been removed + +config BR2_PACKAGE_HAWKTRACER + bool "hawktracer has been removed" + select BR2_LEGACY + help + hawktracer is unmaintained and has been removed + +config BR2_PACKAGE_CONNMAN_GTK + bool "connman-gtk has been removed" + select BR2_LEGACY + help + connman-gtk is unmaintained and has been removed + +config BR2_PACKAGE_LIBMHASH + bool "libmhash has been removed" + select BR2_LEGACY + help + libmhash is unmaintained and has been removed + +config BR2_PACKAGE_DMRAID + bool "dmraid has been removed" + select BR2_LEGACY + help + dmraid is unmaintained and has been removed + +config BR2_PACKAGE_LIBNIDS + bool "libnids has been removed" + select BR2_LEGACY + help + libnids is unmaintained and has been removed + +config BR2_TARGET_S500_BOOTLOADER + bool "s500-bootloader" + select BR2_LEGACY + help + s500-bootloader package has been removed + +config BR2_PACKAGE_OPENCV3_WITH_FFMPEG + bool "opencv3 ffmpeg support removed" + select BR2_LEGACY + help + Support for OpenCV 3 ffmpeg support has been removed as it + was no longer compatible with recent versions of ffmpeg. + +config BR2_PACKAGE_OPENCV3_WITH_PROTOBUF + bool "opencv3 protobuf support removed" + select BR2_LEGACY + help + Support for OpenCV 3 protobuf support has been removed as it + was no longer compatible with recent versions of protobuf. + +config BR2_PACKAGE_RESIPROCATE_APPS + bool "resiprocate apps support option removed" + select BR2_LEGACY + help + The build system does not contain an apps-specific option + anymore. + +config BR2_PACKAGE_WATCHDOGD_TEST_SUITE + bool "The watchdogd test mode option has been removed." + select BR2_LEGACY + help + watchdogd v4.1 removes the test mode and test suite. + +config BR2_KERNEL_HEADERS_6_17 + bool "kernel headers version 6.17.x are no longer supported" + select BR2_LEGACY + help + Version 6.17.x of the Linux kernel headers are no longer + maintained upstream and are now removed. + +config BR2_PACKAGE_MESA3D_VDPAU + bool "mesa3d Gallium VDPAU state tracker support removed" + select BR2_LEGACY + help + Mesa3d removed the Gallium VDPAU state tracker. + +config BR2_BINUTILS_VERSION_2_42_X + bool "binutils 2.42 has been removed" + select BR2_LEGACY + help + binutils 2.42 has been removed, select a newer version + instead. + +config BR2_arceb + bool "ARC big endian support removed" + select BR2_LEGACY + help + Synopsys' DesignWare ARC Processor Cores are a family of + 32-bit CPUs that can be used from deeply embedded to high + performance host applications. The big endian support was + not used nor maintained, so it was removed. + +comment "Legacy options removed in 2025.11" + +config BR2_KERNEL_HEADERS_5_4 + bool "kernel headers version 5.4.x are no longer supported" + select BR2_LEGACY + help + Version 5.4.x of the Linux kernel headers are no longer + maintained upstream and are now removed. + +config BR2_PACKAGE_LIBARGTABLE2 + bool "libargtable2 has been removed" + select BR2_LEGACY + help + libargtable2 is unmaintained and has been removed + +config BR2_PACKAGE_OLA + bool "ola has been removed" + select BR2_LEGACY + help + ola is incompatible with current versions of protobuf + +config BR2_PACKAGE_BATMAN_ADV_NC + bool "batman-adv removed network coding" + select BR2_LEGACY + help + batman-adv removed B.A.T.M.A.N. network coding + +config BR2_PACKAGE_DVBSNOOP + bool "dvbsnoop has been removed" + select BR2_LEGACY + help + dvbsnoop is unmaintained and has been removed + +config BR2_PACKAGE_PROCRANK_LINUX + bool "procrank_linux has been removed" + select BR2_LEGACY + help + procrank_linux is unmaintained and has been removed + +config BR2_PACKAGE_MONGREL2 + bool "mongrel2 has been removed" + select BR2_LEGACY + help + mongrel2 is incompatible with MbedTLS 3.6 and has been removed + +config BR2_PACKAGE_EXPECT + bool "expect has been removed" + select BR2_LEGACY + help + expect is unmaintained and has been removed + +config BR2_PACKAGE_BCTOOLBOX + bool "bctoolbox has been removed" + select BR2_LEGACY + help + This package has been removed as part of the linphone + removal. In addition, newer version of linphone directly + bundle bctoolbox making a separate package unnecessary. + +config BR2_PACKAGE_ORTP + bool "ortp has been removed" + select BR2_LEGACY + help + This package has been removed as part of the linphone + removal. In addition, newer version of linphone directly + bundle ortp making a separate package unnecessary. + +config BR2_PACKAGE_MEDIASTREAMER + bool "mediastreamer has been removed" + select BR2_LEGACY + help + This package has been removed as part of the linphone + removal. In addition, newer version of linphone directly + bundle mediastreamer making a separate package unnecessary. + +config BR2_PACKAGE_BELR + bool "belr has been removed" + select BR2_LEGACY + help + This package has been removed as part of the linphone + removal. In addition, newer version of linphone directly + bundle belr making a separate package unnecessary. + +config BR2_PACKAGE_BELLE_SIP + bool "belle-sip has been removed" + select BR2_LEGACY + help + This package has been removed as part of the linphone + removal. In addition, newer version of linphone directly + bundle belle-sip making a separate package unnecessary. + +config BR2_PACKAGE_LINPHONE + bool "linphone has been removed" + select BR2_LEGACY + help + This package was no longer maintained in Buildroot and was + no longer building. It can be re-added if someone volunteers + to fix the issues, update the package and maintain it. + +config BR2_PACKAGE_LIBJWT + bool "libjwt has been removed" + select BR2_LEGACY + help + The only dependee of libjwt, asterisk, is incompatible with + version 3 so the version bundled with asterisk is used and + this package has been removed. + +config BR2_PACKAGE_RAMSPEED + bool "ramspeed has been removed" + select BR2_LEGACY + help + The ramspeed package was removed as it is not maintained + anymore and the upstream repo is gone. + +config BR2_PACKAGE_LESSTIF + bool "lesstif has been removed" + select BR2_LEGACY + help + lesstif is unmaintained and has been removed + +config BR2_KERNEL_HEADERS_6_16 + bool "kernel headers version 6.16.x are no longer supported" + select BR2_LEGACY + help + Version 6.16.x of the Linux kernel headers are no longer + maintained upstream and are now removed. + +config BR2_PACKAGE_MURATA_CYW_FW_CYW4339_1CK + bool "This firmware has been removed" + select BR2_LEGACY + help + This firmware has been removed from Murata package + +config BR2_PACKAGE_MURATA_CYW_FW_CYW4339_ZP + bool "BR2_PACKAGE_MURATA_CYW_FW_CYW4339_ZP has been renamed" + select BR2_LEGACY + select BR2_PACKAGE_MURATA_CYW_FW_CYW4339 + help + The option has been renamed to + BR2_PACKAGE_MURATA_CYW_FW_CYW4339 + +config BR2_PACKAGE_LIBBSON + bool "libbson has been removed" + select BR2_LEGACY + help + libbson is officially deprecated upstream and has been removed + +config BR2_TARGET_ROOTFS_AXFS + bool "AXFS root filesystem has been removed" + select BR2_LEGACY + help + AXFS root filesystem support has been removed. + +config BR2_PACKAGE_LOGSURFER + bool "logsurfer has been removed" + select BR2_LEGACY + help + Logsurfer last updates was on 2011 and fails to build with + GCC14. + +config BR2_LINUX_KERNEL_EXT_FBTFT + bool "FB TFT drivers are deprecated" + select BR2_LEGACY + help + FB TFT drivers were only needed for linux kernels until v3.19, + since v4.0 the drivers are included in the staging area. + +config BR2_PACKAGE_DMENU_WAYLAND + bool "dmenu-wayland has been removed" + select BR2_LEGACY + help + The package has been abandoned for several years. + The only package that previously relied on dmenu-wayland + was sway, and that now relies on wmenu. Please select + wmenu instead. + +config BR2_PACKAGE_SYLPHEED + bool "sylpheed has been removed" + select BR2_LEGACY + help + Due to the removal of libgtk2, the sylpheed package has been + removed. + +config BR2_PACKAGE_PINENTRY_GTK2 + bool "gtk2 backend of pinentry has been removed" + select BR2_LEGACY + help + Due to the removal of libgtk2, the gtk2 backend of pinentry + has been removed. + +config BR2_PACKAGE_OPENCV4_WITH_GTK + bool "opencv4 gtk support has been removed" + select BR2_LEGACY + help + Due to the removal of libgtk2, the gtk support of opencv4 + has been removed. gtk3 support is still available. + +config BR2_PACKAGE_OPENCV3_WITH_GTK + bool "opencv3 gtk support has been removed" + select BR2_LEGACY + help + Due to the removal of libgtk2, the gtk support of opencv3 + has been removed. gtk3 support is still available. + +config BR2_PACKAGE_NETSURF_GTK + bool "gtk frontend of netsurf has been removed" + select BR2_LEGACY + help + Due to the removal of libgtk2, the gtk frontend of netsurf + has been removed. The gtk3 frontend can be used instead for + example. + +config BR2_PACKAGE_METACITY + bool "metacity has been removed" + select BR2_LEGACY + help + The metacity package has been removed, as libgtk2 has been + removed as well. + +config BR2_PACKAGE_LIBSEXY + bool "libsexy has been removed" + select BR2_LEGACY + help + The libsexy package has been removed, as libgtk2 has been + removed as well. + +config BR2_PACKAGE_LIBGLADE + bool "libglade has been removed" + select BR2_LEGACY + help + The libglade package has been removed, as libgtk2 has been + removed as well. + +config BR2_PACKAGE_LEAFPAD + bool "leafpad has been removed" + select BR2_LEGACY + help + The leafpad package has been removed, as libgtk2 has been + removed as well. + +config BR2_PACKAGE_GTKPERF + bool "gtkperf has been removed" + select BR2_LEGACY + help + The gtkperf package has been removed, as libgtk2 has been + removed as well. + +config BR2_PACKAGE_GTK2_ENGINES + bool "gtk2-engines has been removed" + select BR2_LEGACY + help + The gtk2-engines package has been removed, as libgtk2 has + been removed as well. + +config BR2_PACKAGE_GKRELLM_CLIENT + bool "gkrellm client has been removed" + select BR2_LEGACY + help + The gkrellm client option has been removed, as it required + libgtk2, which was removed from Buildroot. + +config BR2_PACKAGE_CWIID_WMGUI + bool "cwiid wmgui has been removed" + select BR2_LEGACY + help + The wmgui part of cwiid required libgtk2, which has been + removed from Buildroot. + +config BR2_LINUX_KERNEL_EXT_AUFS + bool "Aufs Filesystem Module patch has been removed" + select BR2_LEGACY + help + aufs kernel module patch is unmaintained and has been + removed. + +config BR2_PACKAGE_AUFS_UTIL + bool "aufs-util has been removed" + select BR2_LEGACY + help + aufs-util package is unmaintained and has been removed. + +config BR2_TOOLCHAIN_EXTERNAL_LINARO_ARMEB + bool "Linaro armeb 2018.05 external toolchain is deprecated" + select BR2_LEGACY + help + Linaro armeb 2018.05 is no longer maintained and has been + removed from Buildroot. + +config BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM + bool "Linaro ARM 2018.05 external toolchain is deprecated" + select BR2_LEGACY + help + Linaro ARM 2018.05 is no longer maintained and has been + removed from Buildroot. + +config BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64_BE + bool "Linaro AArch64 BE 2018.05 external toolchain is deprecated" + select BR2_LEGACY + help + Linaro AArch64 2018.05 BE is no longer maintained and has been + removed from Buildroot. + +config BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64 + bool "Linaro AArch64 2018.05 external toolchain is deprecated" + select BR2_LEGACY + help + Linaro AArch64 2018.05 is no longer maintained and has been + removed from Buildroot. + +config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS + bool "Sourcery CodeBench MIPS external toolchain is deprecated" + select BR2_LEGACY + help + Sourcery CodeBench MIPS 2016.05 is no longer maintained + and has been removed from Buildroot. + +config BR2_LINUX_KERNEL_EXT_EV3DEV_LINUX_DRIVERS + bool "ev3dev Linux drivers have been removed" + select BR2_LEGACY + help + Linux drivers for LEGO MINDSTORMS EV3 from the ev3dev project + are targeting an outdated kernel which is no longer supported. + comment "Legacy options removed in 2025.08" +config BR2_PACKAGE_NETSTAT_NAT + bool "netstat-nat has been removed" + select BR2_LEGACY + help + The upstream URL is gone and netstat-nat has been removed + from Buildroot. + +config BR2_PACKAGE_LIGHTTPD_LIBEV + bool "lighttpd removed libev support" + select BR2_LEGACY + help + Lighttpd 1.4.80 removed optional libev support. + +config BR2_PACKAGE_LIBSVGTINY + bool "libsvgtiny has been removed" + select BR2_LEGACY + help + Libsvgtiny has been removed from Buildroot. + +config BR2_PACKAGE_THTTPD + bool "thttpd has been removed" + select BR2_LEGACY + help + thttpd is no longer maintained actively by upstream and has + been removed from Buildroot. + config BR2_KERNEL_HEADERS_6_15 bool "kernel headers version 6.15.x are no longer supported" select BR2_LEGACY @@ -2622,12 +3838,12 @@ config BR2_PACKAGE_KODI_LIBTHEORA Kodi does not need libtheora config BR2_PACKAGE_CEGUI06 - bool "BR2_PACKAGE_CEGUI06 was renamed" - select BR2_PACKAGE_CEGUI + bool "BR2_PACKAGE_CEGUI06 was removed" select BR2_LEGACY help - The BR2_PACKAGE_CEGUI06 config symbol was renamed to - BR2_PACKAGE_CEGUI. + cegui06 was removed from Buildroot as it was insufficiently + maintained. It can be re-added if someone volunteers to + maintain it. config BR2_GCC_VERSION_5_X bool "gcc 5.x support removed" @@ -5199,8 +6415,6 @@ config BR2_GCC_VERSION_4_8_ARC help The option that selects the gcc version for the ARC architecture has been renamed to BR2_GCC_VERSION_ARC. -# Note: BR2_GCC_VERSION_4_8_ARC is still referenced from -# package/gcc/Config.in.host config BR2_KERNEL_HEADERS_4_0 bool "kernel headers version 4.0.x are no longer supported" @@ -5543,8 +6757,6 @@ config BR2_PACKAGE_OPENPOWERLINK_KERNEL_MODULE help openpowerlink kernel modules are built if the kernel stack library is selected. -# Note: BR2_PACKAGE_OPENPOWERLINK_KERNEL_MODULE is still referenced from -# package/openpowerlink/Config.in config BR2_PACKAGE_OPENPOWERLINK_LIBPCAP bool "openpowerlink package has been updated" @@ -5553,8 +6765,6 @@ config BR2_PACKAGE_OPENPOWERLINK_LIBPCAP The user space support has been split in two part: - a monolithic user space library - a user space daemon driver -# Note: BR2_PACKAGE_OPENPOWERLINK_LIBPCAP is still referenced from -# package/openpowerlink/Config.in config BR2_LINUX_KERNEL_SAME_AS_HEADERS bool "using the linux headers version for the kernel has been removed" diff --git a/DEVELOPERS b/DEVELOPERS index b33dbf8c5e3..4339b37f110 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -28,9 +28,6 @@ N: Adam Duskett F: package/depot-tools/ -F: package/dmenu-wayland/ -F: package/fcft/ -F: package/foot/ F: package/flutter-engine/ F: package/flutter-packages/ F: package/flutter-packages/flutter-adaptive-scaffold-example/ @@ -42,9 +39,7 @@ F: package/flutter-packages/flutter-rfw-local-example/ F: package/flutter-pi/ F: package/flutter-sdk-bin/ F: package/ivi-homescreen/ -F: package/libutempter/ F: package/mender-update-modules/ -F: package/tllist/ F: support/testing/tests/package/test_flutter.py N: Adam Heinrich @@ -91,6 +86,13 @@ F: package/modem-manager/ N: Aleksandr Makarov F: package/cpp-httplib/ +N: Alexander Shirokov +F: package/aichat/ +F: package/broot/ +F: package/kibi/ +F: package/nnn/ +F: package/zellij/ + N: Alessandro Partesotti F: package/oatpp/ @@ -150,6 +152,15 @@ F: configs/cubieboard2_defconfig N: Alexey Lukyanchuk F: package/zabbix/ +N: Alexis Lothoré +F: package/libxmlsec1/ +F: package/openscap/ +F: package/python-scp/ +F: support/testing/tests/package/test_libldns.py +F: support/testing/tests/package/test_openscap/ +F: support/testing/tests/package/test_openscap.py +F: support/testing/tests/package/test_python_scp.py + N: Alistair Francis F: board/sifive/ F: boot/opensbi/ @@ -157,6 +168,11 @@ F: configs/hifive_unleashed_defconfig F: package/libspdm/ F: package/xen/ +N: Alsey Coleman Miller +F: package/liblc3/ +F: package/plutovg/ +F: package/sdl3_net/ + N: Alvaro G. M F: package/dcron/ F: package/libxmlrpc/ @@ -175,6 +191,10 @@ F: package/libkrb5/ F: package/p7zip/ F: package/wine/ +N: Andrea Ricchi +F: package/cutekeyboard/ +F: package/libcppconnman/ + N: Andreas Klinger F: package/ply/ @@ -231,6 +251,7 @@ F: package/python-pillow/ F: package/python-pydal/ F: package/python-spidev/ F: package/python-web2py/ +F: package/qpdf/ F: package/qt5/qt5coap/ F: package/qt5/qt5knx/ F: package/qt5/qt5mqtt/ @@ -336,12 +357,13 @@ F: package/tcpdump/ F: package/ti-uim/ F: package/uhubctl/ +N: Bastien Curutchet +F: package/rasdaemon/ +F: support/testing/tests/package/test_rasdaemon.py + N: Baxiche Su F: package/qt6/qt6multimedia/ -N: Ben Boeckel -F: package/taskd/ - N: Benjamin Kamath F: package/lapack/ @@ -356,6 +378,7 @@ F: package/bcg729/ F: package/bento4/ F: package/bitcoin/ F: package/clamav/ +F: package/cxxopts/ F: package/dav1d/ F: package/dht/ F: package/dnsmasq/ @@ -387,6 +410,7 @@ F: package/intel-mediasdk/ F: package/intel-microcode/ F: package/intel-vpl-gpu-rt/ F: package/jsoncpp/ +F: package/jwt-cpp/ F: package/kodi* F: package/lame/ F: package/lcms2/ @@ -402,7 +426,6 @@ F: package/libcec/ F: package/libcodec2/ F: package/libcrossguid/ F: package/libde265/ -F: package/libdecor/ F: package/libdeflate/ F: package/libdisplay-info/ F: package/libdrm/ @@ -410,15 +433,13 @@ F: package/libdvbcsa/ F: package/libdvdcss/ F: package/libdvdnav/ F: package/libdvdread/ -F: package/libfreeglut/ F: package/libfribidi/ F: package/libg7221/ F: package/libglew/ F: package/libglu/ -F: package/libhdhomerun/ F: package/libheif/ +F: package/libid3tag/ F: package/libilbc/ -F: package/libldns/ F: package/libmicrohttpd/ F: package/libminiupnpc/ F: package/libmspack/ @@ -427,12 +448,13 @@ F: package/libnpth/ F: package/libogg/ F: package/libopenh264/ F: package/libpciaccess/ -F: package/libplatform/ +F: package/libplacebo/ F: package/libpng/ F: package/libsidplay2/ F: package/libsilk/ F: package/libsndfile/ F: package/libsoundtouch/ +F: package/libudev-zero/ F: package/libudfread/ F: package/libunibreak/ F: package/liburiparser/ @@ -445,6 +467,7 @@ F: package/libvorbis/ F: package/libvpl/ F: package/libvpx/ F: package/libyuv/ +F: package/libzippp/ F: package/linux-firmware/ F: package/mc/ F: package/mesa3d/ @@ -483,6 +506,7 @@ F: package/perl-uri/ F: package/perl-www-robotrules/ F: package/php/ F: package/pngquant/ +F: package/postgresql/ F: package/pppd/ F: package/privoxy/ F: package/pure-ftpd/ @@ -499,6 +523,7 @@ F: package/python-pyicu/ F: package/python-pylru/ F: package/python-requests-oauthlib/ F: package/python-slob/ +F: package/qt6/qt6positioning/ F: package/rrdtool/ F: package/rsync/ F: package/rtmpdump/ @@ -516,12 +541,14 @@ F: package/unixodbc/ F: package/utfcpp/ F: package/vlc/ F: package/wget/ +F: package/wget2/ F: package/wireless-regdb/ F: package/wireless_tools/ F: package/x264/ F: package/x265/ F: package/xmrig/ F: package/ytree/ +F: package/zix/ F: package/znc/ F: support/testing/tests/package/test_perl_html_parser.py @@ -539,6 +566,7 @@ F: package/libgpiod2/ N: Bogdan Radulescu F: package/iftop/ F: package/ncdu/ +F: package/nettest/ N: Brandon Maier F: board/freescale/ls1046a-frwy/ @@ -578,10 +606,7 @@ F: package/jailhouse/ F: package/sunxi-boards/ N: Carsten Schoenert -F: package/dvbsnoop/ F: package/libdvbsi/ -F: package/libsvg/ -F: package/libsvg-cairo/ N: Cédric Chépied F: package/znc/ @@ -600,6 +625,10 @@ F: package/alsa-plugins/ N: Changming Huang F: package/qoriq-cadence-dp-firmware/ +N: Chen Pei +F: package/iniparser/ +F: package/ndctl/ + N: Chris Packham F: package/coremark/ F: package/coremark-pro/ @@ -686,18 +715,8 @@ F: package/perl-sys-mmap/ F: package/perl-time-parsedate/ F: package/perl-x10/ -N: Clayton Shotwell -F: package/audit/ -F: package/checkpolicy/ -F: package/cpio/ -F: package/libcgroup/ -F: package/libee/ -F: package/libestr/ -F: package/liblogging/ -F: package/libselinux/ -F: package/libsemanage/ -F: package/libsepol/ -F: package/policycoreutils/ +N: Christopher Obbard +F: package/dtui/ N: Colin Foster F: package/python-tftpy/ @@ -791,17 +810,27 @@ N: Dario Binacchi F: board/bsh/ F: board/stmicroelectronics/stm32f746-disco/ F: board/stmicroelectronics/stm32f769-disco/ +F: board/stmicroelectronics/stm32h747-disco/ F: boot/ti-k3-boot-firmware/ F: configs/imx6ulz_bsh_smm_m2_defconfig F: configs/imx8mn_bsh_smm_s2_defconfig F: configs/imx8mn_bsh_smm_s2_pro_defconfig F: configs/stm32f746_disco_sd_defconfig F: configs/stm32f769_disco_sd_defconfig +F: configs/stm32h747_disco_sd_defconfig F: package/aespipe/ F: package/armadillo/ +F: package/atf/ F: package/babeld/ +F: package/bc/ +F: package/cmocka/ +F: package/connman/ +F: package/drogon/ +F: package/empty/ F: package/iana-assignments/ F: package/inih/ +F: package/less/ +F: package/libgphoto2/ F: package/pocketpy/ F: package/sscep/ F: package/tinyinit/ @@ -828,9 +857,7 @@ F: package/libtalloc/ N: David Lechner F: board/lego/ev3/ F: configs/lego_ev3_defconfig -F: linux/linux-ext-ev3dev-linux-drivers.mk F: package/brickd/ -F: package/ev3dev-linux-drivers/ N: David Pierret F: package/bat/ @@ -870,6 +897,7 @@ N: Dimitar Tomov F: package/wolftpm/ N: Dimitrios Siganos +F: package/bvi/ F: package/wireless-regdb/ N: Dmitry Chestnykh @@ -877,9 +905,6 @@ F: board/qemu/sparc-ss10/ F: configs/qemu_sparc_ss10_defconfig F: package/uclibc-ng-test/ -N: Dominik Faessler -F: package/logsurfer/ - N: Dominik Michael Rauh F: package/gdal/ @@ -947,9 +972,6 @@ F: package/imx-mkimage/ N: Erik Stromdahl F: package/mxsldr/ -N: Ernesto L. Williams Jr -F: package/szip/ - N: Esben Haabendal F: package/python-kiwisolver/ @@ -959,7 +981,7 @@ F: package/optee-client/ F: package/optee-examples/ F: package/optee-test/ -N: Eugen Hristev +N: Eugen Hristev F: board/atmel/readme.txt F: board/microchip/sama7g5ek/ F: configs/microchip_sama7g5ek* @@ -1001,22 +1023,18 @@ F: package/atest/ F: package/crucible/ F: package/kmscube/ -N: Fabio Porcedda -F: package/netsurf-buildsystem/ - N: Fabio Urquiza F: package/bitcoin/ N: Fabrice Fontaine F: package/domoticz/ +F: package/jwt-cpp/ F: package/libmediaart/ F: package/libmaxminddb/ F: package/openzwave/ N: Fabrice Fontaine F: package/bearssl/ -F: package/belle-sip/ -F: package/belr/ F: package/boinc/ F: package/cairo/ F: package/daq3/ @@ -1047,7 +1065,6 @@ F: package/libcue/ F: package/libebml/ F: package/libgee/ F: package/libglib2/ -F: package/libgtk2/ F: package/libgtk3/ F: package/libhtp/ F: package/libidn/ @@ -1099,7 +1116,6 @@ F: package/tinycbor/ F: package/tinydtls/ F: package/whois/ F: package/x11r7/xlib_libXpresent/ -F: package/zeek/ N: Fabrice Goucem F: board/freescale/imx6ullevk/ @@ -1108,15 +1124,32 @@ F: configs/freescale_imx6ullevk_defconfig N: Falco Hyfing F: package/python-pymodbus/ +N: Fengwei Tan +F: package/btop/ +F: support/testing/tests/core/test_flat_stacksize.py + N: Fiona Klute F: package/*/S* F: package/panel-mipi-dbi-firmware/ F: package/python-aiomqtt/ +F: package/python-markdown-it-py/ +F: package/python-mdurl/ +F: package/python-platformdirs/ F: package/python-pyasynchat/ F: package/python-pyasyncore/ +F: package/python-rich/ +F: package/python-textual/ F: support/testing/tests/package/sample_python_networkmanager_goi.py +F: support/testing/tests/package/sample_python_pyroute2.py F: support/testing/tests/package/test_nftables.py F: support/testing/tests/package/test_python_networkmanager_goi.py +F: support/testing/tests/package/test_python_pyroute2.py + +N: Flaviu Nistor +F: package/python-cramjam/ +F: package/python-snappy/ +F: support/testing/tests/package/test_python_snappy.py +F: support/testing/tests/package/sample_python_snappy.py N: Flávio Tapajós F: configs/asus_tinker-s_rk3288_defconfig @@ -1130,6 +1163,8 @@ F: package/cpulimit/ N: Florian Larysch F: package/casync-nano/ +F: package/sigsum-c/ +F: package/sigsum-go/ N: Floris Bos F: package/ipmitool/ @@ -1144,40 +1179,38 @@ F: package/tbb/ N: Francisco Gonzalez F: package/ser2net/ +N: Franciszek Stachura +F: support/testing/tests/package/test_memcached.py +F: support/testing/tests/package/test_nano.py + N: Francois Dugast F: board/sipeed/licheepi_nano/ F: board/visionfive2/ F: configs/sipeed_licheepi_nano_defconfig F: configs/visionfive2_defconfig -N: Francois Perrad -F: board/freescale/ls1028ardb/ +N: Francois Perrad F: board/olimex/a20_olinuxino F: board/olimex/imx233_olinuxino/ F: board/olimex/stmp1_olinuxino/ -F: configs/ls1028ardb_defconfig F: configs/olimex_a20_olinuxino_* F: configs/olimex_imx233_olinuxino_defconfig F: configs/olimex_stmp157_olinuxino_lime_defconfig F: package/4th/ F: package/cgilua/ -F: package/chipmunk/ -F: package/cog/ F: package/collectl/ F: package/copas/ F: package/coxpcall/ F: package/dado/ F: package/ficl/ -F: package/graphene/ +F: package/hare* F: package/janet/ -F: package/libgtk4/ +F: package/qbe/ F: package/libtomcrypt/ F: package/libtommath/ -F: package/libwpe/ F: package/linenoise/ F: package/ljlinenoise/ F: package/lua-inotify/ -F: package/lmdb/ F: package/lpeg/ F: package/lpty/ F: package/lrandom/ @@ -1186,16 +1219,14 @@ F: package/lua* F: package/lynis/ F: package/lzlib/ F: package/moarvm/ -F: package/mstpd/ -F: package/netsurf/ +F: package/opendoas/ F: package/perl* +F: package/pkg-hare.mk F: package/pkg-perl.mk F: package/pkg-luarocks.mk F: package/quickjs/ F: package/rings/ -F: package/tekui/ -F: package/wpebackend-fdo/ -F: package/wpewebkit/ +F: package/scdoc/ F: package/wsapi/ F: package/wsapi-fcgi/ F: package/wsapi-xavante/ @@ -1215,7 +1246,7 @@ F: package/sane-backends/ F: package/upx/ F: package/zxing-cpp/ -N: Frank Vanbever +N: Frank Vanbever F: package/libmodsecurity/ F: package/nginx-modsecurity/ @@ -1255,7 +1286,7 @@ F: package/cctz/ F: package/clpeak/ F: package/faad2/ F: package/fdk-aac/ -F: package/hawktracer/ +F: package/ftxui/ F: package/httping/ F: package/iozone/ F: package/leptonica/ @@ -1287,8 +1318,10 @@ F: configs/mangopi_mq1rdw2_defconfig F: configs/olimex_a* F: configs/rockpro64_defconfig F: package/at/ +F: package/bind/ F: package/binutils/ F: package/cryptsetup/ +F: package/dash/ F: package/erlang-jiffy/ F: package/esp-hosted/ F: package/gcc/ @@ -1299,6 +1332,7 @@ F: package/liblo/ F: package/libnspr/ F: package/libnss/ F: package/libnvme/ +F: package/libtirpc/ F: package/libtraceevent/ F: package/libtracefs F: package/linux-tools/linux-tool-rtla.mk.in @@ -1307,10 +1341,12 @@ F: package/minicom/ F: package/mongoose/ F: package/mmc-utils/ F: package/nfs-utils/ +F: package/putty/ F: package/python-libconf/ F: package/python-uvloop/ F: package/qt5/ F: package/rockchip-mali/ +F: package/rpcbind/ F: package/rtl8188eu/ F: package/rtl8189es/ F: package/rtl8192eu/ @@ -1324,9 +1360,14 @@ F: package/sunxi-mali-utgard-driver/ F: package/sunxi-tools/ F: package/swugenerator/ F: package/swupdate/ +F: package/tmux/ F: package/trace-cmd/ F: package/udisks/ +F: package/util-linux/ +F: package/vim/ F: package/wilc-driver/ +F: package/wireshark/ +F: package/zlib-ng/ F: toolchain/ N: Graeme Smecher @@ -1345,7 +1386,6 @@ F: fs/f2fs/ F: package/bluez5_utils-headers/ F: package/f2fs-tools/ F: package/graphicsmagick/ -F: package/pigpio/ F: package/python-aioblescan/ F: package/python-bluezero/ F: package/python-crontab/ @@ -1364,7 +1404,6 @@ N: Guillaume Chaye F: package/sane-airscan/ N: Guillaume William Brs -F: package/libnids/ F: package/libxcrypt/ F: package/liquid-dsp/ F: package/mbw/ @@ -1456,6 +1495,11 @@ F: package/gcc-bare-metal/ F: package/newlib-bare-metal/ F: toolchain/toolchain-bare-metal-buildroot/ +N: Igor Opaniuk +F: package/qrtr/ +F: package/rmtfs/ +F: package/tqftpserv/ + N: Ilias Apalodimas F: package/keepalived/ @@ -1492,11 +1536,6 @@ F: board/orangepi/orangepi-zero-plus2/ F: board/pine64/ F: configs/amarula_vyasa_rk3288_defconfig F: configs/asus_tinker_rk3288_defconfig -F: configs/engicam_imx6qdl_icore_defconfig -F: configs/engicam_imx6qdl_icore_qt5_defconfig -F: configs/engicam_imx6qdl_icore_rqs_defconfig -F: configs/engicam_imx6ul_geam_defconfig -F: configs/engicam_imx6ul_isiot_defconfig F: configs/olimex_a33_olinuxino_defconfig F: configs/olimex_a64_olinuxino_defconfig F: configs/orangepi_zero_plus2_defconfig @@ -1532,7 +1571,9 @@ F: package/superiotool/ F: package/tailscale/ F: package/uefisettings/ F: package/zchunk/ +F: support/testing/tests/package/sample_python_httpx2.py F: support/testing/tests/package/sample_python_rtoml.py +F: support/testing/tests/package/test_python_httpx2.py F: support/testing/tests/package/test_python_rtoml.py N: James Knight @@ -1557,9 +1598,6 @@ N: Jan Havran F: board/pine64/pinecube/ F: configs/pine64_pinecube_defconfig -N: Jan Heylen -F: package/opentracing-cpp/ - N: Jan Kraval F: board/orangepi/orangepi-lite F: configs/orangepi_lite_defconfig @@ -1626,7 +1664,6 @@ F: package/qt6/ N: Jianhui Zhao F: package/libuhttpd/ -F: package/libuwsc/ F: package/rtty/ N: Jiaxun Yang @@ -1639,6 +1676,7 @@ F: configs/qemu_loongarch64_virt_efi_defconfig N: Joachim Wiberg F: configs/globalscale_espressobin_defconfig F: board/globalscale/espressobin/ +F: package/firewalld/ F: package/inadyn/ F: package/libconfuse/ F: package/libite/ @@ -1658,6 +1696,7 @@ F: package/ssdp-responder/ F: package/sysklogd/ F: package/uredir/ F: package/watchdogd/ +F: support/testing/tests/package/test_mdnsd.py N: Jochen Baltes F: package/altera-stapl @@ -1705,18 +1744,11 @@ F: package/erlang-p1-yconf/ F: package/erlang-p1-zlib/ F: package/erlang-stun/ F: package/erlang-xmpp/ -F: package/forge/ F: package/nginx-dav-ext/ -F: package/vis-network/ -F: package/vuejs/ N: John Stile F: package/dhcpcd/ -N: John Faith -F: package/python-inflection/ -F: package/sdbusplus/ - N: Jon Ringle F: package/mbpoll/ @@ -1727,10 +1759,7 @@ N: Jonathan Ben Avraham F: arch/Config.in.xtensa F: package/autofs/ F: package/dawgdic/ -F: package/libphidget/ -F: package/phidgetwebservice/ F: package/rapidxml/ -F: package/sphinxbase/ N: Joris Offouga F: package/python-colorlog/ @@ -1751,11 +1780,12 @@ F: support/testing/tests/package/test_zfs.py N: Joseph Kogut F: package/at-spi2-core/ F: package/earlyoom/ -F: package/gconf/ F: package/libnss/ +F: package/llama-cpp/ F: package/llvm-project/clang/ F: package/llvm-project/lld/ F: package/llvm-project/llvm/ +F: package/mesa3d/ F: package/python-cython/ F: package/python-pycups/ F: package/python-raven/ @@ -1766,6 +1796,8 @@ F: package/python-xlib/ F: package/sentry-cli/ F: package/sentry-native/ F: package/unclutter-xfixes/ +F: package/virglrenderer/ +F: support/testing/tests/package/test_virglrenderer.py N: Joshua Henderson F: package/qt5/qt5wayland/ @@ -1791,9 +1823,6 @@ F: package/libmodbus/ F: package/ltris/ F: package/opentyrian/ -N: Julien Corjon -F: package/qt5/ - N: Julien Grossholtz F: board/raspberrypi/ F: configs/raspberrypizero2w_defconfig @@ -1820,7 +1849,6 @@ F: package/libopenmpt/ F: package/mokutil/ F: package/oath-toolkit/ F: package/octave/ -F: package/ola/ F: package/openblas/ F: package/opencsd/ F: package/openmpi/ @@ -1848,8 +1876,12 @@ F: support/testing/tests/boot/test_optee_os.py F: support/testing/tests/boot/test_optee_os/ F: support/testing/tests/fs/test_btrfs.py F: support/testing/tests/fs/test_btrfs/ +F: support/testing/tests/fs/test_cramfs.py +F: support/testing/tests/fs/test_cramfs/ F: support/testing/tests/fs/test_erofs.py F: support/testing/tests/fs/test_erofs/ +F: support/testing/tests/fs/test_xfs.py +F: support/testing/tests/fs/test_xfs/ F: support/testing/tests/package/sample_python_distro.py F: support/testing/tests/package/sample_python_gnupg.py F: support/testing/tests/package/sample_python_hwdata.py @@ -1857,12 +1889,15 @@ F: support/testing/tests/package/sample_python_midiutil.py F: support/testing/tests/package/sample_python_ml_dtypes.py F: support/testing/tests/package/sample_python_mpmath.py F: support/testing/tests/package/sample_python_pyalsa.py +F: support/testing/tests/package/sample_python_pydal.py F: support/testing/tests/package/sample_python_spake2.py F: support/testing/tests/package/sample_python_sympy.py F: support/testing/tests/package/test_4th.py F: support/testing/tests/package/test_acl.py F: support/testing/tests/package/test_acpica.py F: support/testing/tests/package/test_acpica/ +F: support/testing/tests/package/test_aichat.py +F: support/testing/tests/package/test_aichat/ F: support/testing/tests/package/test_apache.py F: support/testing/tests/package/test_attr.py F: support/testing/tests/package/test_audio_codec_base.py @@ -1874,13 +1909,13 @@ F: support/testing/tests/package/test_bitcoin.py F: support/testing/tests/package/test_brotli.py F: support/testing/tests/package/test_btrfs_progs.py F: support/testing/tests/package/test_btrfs_progs/ +F: support/testing/tests/package/test_bubblewrap.py F: support/testing/tests/package/test_bzip2.py F: support/testing/tests/package/test_compressor_base.py +F: support/testing/tests/package/test_connman.py F: support/testing/tests/package/test_coremark.py F: support/testing/tests/package/test_cryptsetup.py F: support/testing/tests/package/test_cryptsetup/ -F: support/testing/tests/package/test_ddrescue.py -F: support/testing/tests/package/test_ddrescue/ F: support/testing/tests/package/test_dieharder.py F: support/testing/tests/package/test_dmidecode.py F: support/testing/tests/package/test_dos2unix.py @@ -1888,16 +1923,19 @@ F: support/testing/tests/package/test_dosfstools.py F: support/testing/tests/package/test_dosfstools/ F: support/testing/tests/package/test_dpdk.py F: support/testing/tests/package/test_ed.py +F: support/testing/tests/package/test_erlang.py F: support/testing/tests/package/test_ethtool.py F: support/testing/tests/package/test_ethtool/ F: support/testing/tests/package/test_exfatprogs.py F: support/testing/tests/package/test_exfatprogs/ F: support/testing/tests/package/test_file.py F: support/testing/tests/package/test_file/ +F: support/testing/tests/package/test_flac.py F: support/testing/tests/package/test_fluidsynth.py F: support/testing/tests/package/test_fluidsynth/ F: support/testing/tests/package/test_fping.py F: support/testing/tests/package/test_fwts.py +F: support/testing/tests/package/test_fwts/ F: support/testing/tests/package/test_gawk.py F: support/testing/tests/package/test_ghostscript.py F: support/testing/tests/package/test_ghostscript/ @@ -1912,6 +1950,8 @@ F: support/testing/tests/package/test_gnuradio/ F: support/testing/tests/package/test_gpsd.py F: support/testing/tests/package/test_gpsd/ F: support/testing/tests/package/test_gstreamer1.py +F: support/testing/tests/package/test_guile.py +F: support/testing/tests/package/test_guile/ F: support/testing/tests/package/test_gzip.py F: support/testing/tests/package/test_highway.py F: support/testing/tests/package/test_hwloc.py @@ -1931,16 +1971,21 @@ F: support/testing/tests/package/test_kmod.py F: support/testing/tests/package/test_kmod/ F: support/testing/tests/package/test_kmscube.py F: support/testing/tests/package/test_kmscube/ +F: support/testing/tests/package/test_kvmtool.py +F: support/testing/tests/package/test_kvmtool/ F: support/testing/tests/package/test_lame.py F: support/testing/tests/package/test_less.py F: support/testing/tests/package/test_libcamera.py F: support/testing/tests/package/test_libcamera/ F: support/testing/tests/package/test_libcurl.py F: support/testing/tests/package/test_libgpgme.py +F: support/testing/tests/package/test_libgpiod2.py +F: support/testing/tests/package/test_libgpiod2/ F: support/testing/tests/package/test_libjxl.py F: support/testing/tests/package/test_lighttpd.py F: support/testing/tests/package/test_links.py F: support/testing/tests/package/test_links/ +F: support/testing/tests/package/test_llama_cpp.py F: support/testing/tests/package/test_lrzip.py F: support/testing/tests/package/test_lrzsz.py F: support/testing/tests/package/test_ltp_testsuite.py @@ -1969,21 +2014,24 @@ F: support/testing/tests/package/test_nftables.py F: support/testing/tests/package/test_nftables/ F: support/testing/tests/package/test_ngrep.py F: support/testing/tests/package/test_nmap.py +F: support/testing/tests/package/test_ndctl.py +F: support/testing/tests/package/test_ndctl/ F: support/testing/tests/package/test_ntp.py F: support/testing/tests/package/test_ntp/ F: support/testing/tests/package/test_numactl.py F: support/testing/tests/package/test_numactl/ F: support/testing/tests/package/test_oath_toolkit.py F: support/testing/tests/package/test_octave.py -F: support/testing/tests/package/test_ola.py -F: support/testing/tests/package/test_ola/ F: support/testing/tests/package/test_openblas.py F: support/testing/tests/package/test_openocd.py +F: support/testing/tests/package/test_opus_tools.py F: support/testing/tests/package/test_parted.py F: support/testing/tests/package/test_patch.py F: support/testing/tests/package/test_patch/ F: support/testing/tests/package/test_pciutils.py F: support/testing/tests/package/test_perftest.py +F: support/testing/tests/package/test_php.py +F: support/testing/tests/package/test_php/ F: support/testing/tests/package/test_pigz.py F: support/testing/tests/package/test_postgresql.py F: support/testing/tests/package/test_pppd.py @@ -1999,10 +2047,13 @@ F: support/testing/tests/package/test_python_midiutil.py F: support/testing/tests/package/test_python_ml_dtypes.py F: support/testing/tests/package/test_python_mpmath.py F: support/testing/tests/package/test_python_pyalsa.py +F: support/testing/tests/package/test_python_pydal.py F: support/testing/tests/package/test_python_pyqt5.py F: support/testing/tests/package/test_python_pyqt5/ F: support/testing/tests/package/test_python_spake2.py F: support/testing/tests/package/test_python_sympy.py +F: support/testing/tests/package/test_quickjs.py +F: support/testing/tests/package/test_quickjs/ F: support/testing/tests/package/test_rdma_core.py F: support/testing/tests/package/test_rdma_core/ F: support/testing/tests/package/test_rrdtool.py @@ -2012,6 +2063,7 @@ F: support/testing/tests/package/test_sed.py F: support/testing/tests/package/test_socat.py F: support/testing/tests/package/test_sox.py F: support/testing/tests/package/test_sqlite.py +F: support/testing/tests/package/test_squid.py F: support/testing/tests/package/test_strace.py F: support/testing/tests/package/test_stress_ng.py F: support/testing/tests/package/test_swipl.py @@ -2020,7 +2072,7 @@ F: support/testing/tests/package/test_tcl.py F: support/testing/tests/package/test_tcl/ F: support/testing/tests/package/test_tcpdump.py F: support/testing/tests/package/test_tesseract_ocr.py -F: support/testing/tests/package/test_thttpd.py +F: support/testing/tests/package/test_tio.py F: support/testing/tests/package/test_trace_cmd.py F: support/testing/tests/package/test_trace_cmd/ F: support/testing/tests/package/test_tree.py @@ -2036,6 +2088,8 @@ F: support/testing/tests/package/test_weston/ F: support/testing/tests/package/test_wget.py F: support/testing/tests/package/test_which.py F: support/testing/tests/package/test_wine.py +F: support/testing/tests/package/test_wpa_supplicant.py +F: support/testing/tests/package/test_wpa_supplicant/ F: support/testing/tests/package/test_xfsprogs.py F: support/testing/tests/package/test_xfsprogs/ F: support/testing/tests/package/test_xvisor.py @@ -2089,15 +2143,12 @@ F: package/rockchip-rkbin/ N: Klaus Heinrich Kiwi F: package/wqy-zenhei/ -N: Koen Martens -F: package/capnproto/ -F: package/linuxconsoletools/ - N: Kory Maincent F: board/octavo/osd32mp1-brk/ F: board/octavo/osd32mp1-red/ F: configs/octavo_osd32mp1_brk_defconfig F: configs/octavo_osd32mp1_red_defconfig +F: package/drm-info/ N: Kris Bahnsen F: package/wilc-firmware/ @@ -2136,9 +2187,6 @@ F: package/python-gunicorn/ F: support/testing/tests/package/sample_python_flask.py F: support/testing/tests/package/test_python_flask.py -N: Lionel Orry -F: package/mongrel2/ - N: Lothar Felten F: board/bananapi/bananapi-m2-ultra/ F: board/beagleboard/beaglebone/ @@ -2169,6 +2217,7 @@ F: configs/zynq_zc706_defconfig F: configs/zynqmp_zcu106_defconfig F: package/agentpp/ F: package/exim/ +F: package/heaptrack/ F: package/libpjsip/ F: package/linux-tools/linux-tool-usbtools.mk.in F: package/qpid-proton/ @@ -2177,6 +2226,7 @@ F: package/snmppp/ F: package/stm32flash/ F: package/unzip/ F: support/legal-info/ +F: support/testing/tests/package/test_heaptrack.py N: Lucas De Marchi F: package/fswebcam/ @@ -2207,7 +2257,29 @@ N: Mahyar Koshkouei F: package/ffmpeg/ F: package/mpv/ F: package/rpi-firmware/ -F: package/rpi-userland/ + +N: Manuel Diener +F: package/pico-sdk/ +F: package/picotool/ +F: package/python-annotated-doc/ +F: package/python-apscheduler/ +F: package/python-crc/ +F: package/python-diskcache/ +F: package/python-django/ +F: package/python-gpiod/ +F: package/python-immutabledict/ +F: package/python-jc/ +F: package/python-log-rate-limit/ +F: package/python-pydantic/ +F: package/python-pydantic-core/ +F: package/python-pydantic-settings/ +F: package/python-typing-inspection/ +F: package/python-tzlocal/ +F: package/python-sdbus-modemmanager/ +F: package/python-sdbus-systemd/ +F: package/python-varlink/ +F: package/python-waitress/ +F: package/python-whitenoise/ N: Marcin Bis F: package/bluez5_utils/ @@ -2221,10 +2293,10 @@ F: board/orangepi/orangepi-zero3/ F: configs/grinn_* F: configs/orangepi_zero_plus_defconfig F: configs/orangepi_zero3_defconfig -F: package/argparse/ F: package/dt-utils/ F: package/easydbus/ F: package/gitlab-runner/ +F: package/lua-argparse/ F: package/lua-flu/ F: package/lua-stdlib/ F: package/luaossl/ @@ -2248,13 +2320,14 @@ F: support/testing/tests/package/sample_python_dbus_fast.py F: support/testing/tests/package/sample_python_dbus_next.py F: support/testing/tests/package/sample_python_pytest.py F: support/testing/tests/package/sample_python_pytest_asyncio.py +F: support/testing/tests/package/test_easydbus.py +F: support/testing/tests/package/test_easydbus/ F: support/testing/tests/package/test_netdata.py F: support/testing/tests/package/test_python_dbus_next.py F: support/testing/tests/package/test_python_pytest.py F: support/testing/tests/package/test_python_pytest_asyncio.py N: Marcus Folkesson -F: package/criu/ F: package/libcamera/ F: package/libcamera-apps/ F: package/libostree/ @@ -2269,40 +2342,20 @@ F: utils/diffconfig N: Marcus Hoffmann F: package/nethogs/ -F: package/pico-sdk/ -F: package/picotool/ -F: package/python-apscheduler/ -F: package/python-crc/ F: package/python-django/ -F: package/python-immutabledict/ +F: package/python-gpiod/ F: package/python-jc/ -F: package/python-log-rate-limit/ -F: package/python-pydantic/ -F: package/python-pydantic-core/ -F: package/python-pydantic-settings/ -F: package/python-ruamel-yaml-clib/ -F: package/python-typing-inspection/ -F: package/python-tzlocal/ -F: package/python-sdbus-modemmanager/ +F: package/python-varlink/ F: package/python-waitress/ -F: support/testing/tests/package/test_python_apscheduler.py -F: support/testing/tests/package/test_python_crc.py +F: package/python-whitenoise/ F: support/testing/tests/package/test_python_django.py -F: support/testing/tests/package/test_python_fastapi.py -F: support/testing/tests/package/test_python_pydantic.py -F: support/testing/tests/package/test_python_pydantic_settings.py -F: support/testing/tests/package/test_python_ruamel_yaml.py -F: support/testing/tests/package/test_python_sdbus_modemmanager.py -F: support/testing/tests/package/test_python_tzlocal.py +F: support/testing/tests/package/test_python_requests.py +F: support/testing/tests/package/test_python_varlink.py +F: support/testing/tests/package/test_python_varlink/ F: support/testing/tests/package/test_python_waitress.py -F: support/testing/tests/package/sample_python_apscheduler.py -F: support/testing/tests/package/sample_python_crc.py +F: support/testing/tests/package/test_python_whitenoise.py F: support/testing/tests/package/sample_python_django.py -F: support/testing/tests/package/sample_python_fastapi.py -F: support/testing/tests/package/sample_python_pydantic.py -F: support/testing/tests/package/sample_python_pydantic_settings.py -F: support/testing/tests/package/sample_python_ruamel_yaml.py -F: support/testing/tests/package/sample_python_sdbus_modemmanager.py +F: support/testing/tests/package/sample_python_requests.py N: Marek Belisko F: package/libatasmart/ @@ -2352,7 +2405,6 @@ F: package/python-webargs/ N: Martin Kepplinger F: package/tslib/ F: package/x11r7/xdriver_xf86-input-tslib/ -F: package/x11vnc/ N: Martin Povišer F: package/python-construct/ @@ -2369,26 +2421,6 @@ F: package/gtkiostream/ N: Matt Silva F: package/rlwrap/ -N: Mauro Condarelli -F: package/mc/ -F: package/python-autobahn/ -F: package/python-cbor/ -F: package/python-characteristic/ -F: package/python-click/ -F: package/python-lmdb/ -F: package/python-mistune/ -F: package/python-netaddr/ -F: package/python-pygments/ -F: package/python-pynacl/ -F: package/python-pytrie/ -F: package/python-service-identity/ -F: package/python-setproctitle/ -F: package/python-shutilwhich/ -F: package/python-treq/ -F: package/python-txaio/ -F: package/python-ujson/ -F: package/python-wsaccel/ - N: Maksim Kiselev F: package/ledmon/ @@ -2424,20 +2456,26 @@ F: configs/arcturus_ucls1012a_defconfig N: Michael Fischer F: package/gnuplot/ F: package/sdl2/ +F: package/sdl3/ +F: package/sdl3_gfx/ +F: package/sdl3_image/ +F: package/sdl3_ttf/ N: Michael Nosthoff F: package/boost/ F: package/catch2/ F: package/fmt/ -F: package/grpc/ F: package/gtest/ F: package/json-for-modern-cpp/ F: package/libabseil-cpp/ +F: package/libgpiod2/ F: package/networkd-dispatcher/ F: package/protobuf/ -F: package/re2/ +F: package/sdbus-cpp/ F: package/spdlog/ F: package/sqlitecpp/ +F: support/testing/tests/package/br2-external/sqlitecpp/ +F: support/testing/tests/package/test_sqlitecpp.py N: Michael Trimarchi F: board/bsh/ @@ -2477,6 +2515,9 @@ F: package/libfribidi/ N: Mircea Gliga F: package/mbuffer/ +N: Mohammed Sadik Shaik +F: package/k3conf/ + N: Murat Demirten F: package/jpeg-turbo/ F: package/libgeotiff/ @@ -2490,6 +2531,7 @@ F: package/libgudev/ N: Neal Frager F: board/versal/ +F: board/versal2/ F: board/xilinx/ F: board/zynq/ F: board/zynqmp/ @@ -2497,7 +2539,9 @@ F: boot/xilinx-embeddedsw/ F: boot/xilinx-prebuilt/ F: configs/versal_vck190_defconfig F: configs/versal_vek280_defconfig +F: configs/versal_vpk120_defconfig F: configs/versal_vpk180_defconfig +F: configs/versal2_vek385_defconfig F: configs/zynq_zc702_defconfig F: configs/zynq_zc706_defconfig F: configs/zynqmp_kria_kd240_defconfig @@ -2510,6 +2554,8 @@ F: package/binutils-bare-metal/ F: package/bootgen/ F: package/gcc-bare-metal/ F: package/newlib-bare-metal/ +F: package/qemu-xen/ +F: package/xen/ F: package/xilinx-fpgautil/ F: toolchain/toolchain-bare-metal-buildroot/ @@ -2634,6 +2680,9 @@ F: package/libiio/ F: package/lightning/ F: package/umtprd/ +N: Paul Elder +F: package/raw2rgbpnm/ + N: Pedro Aguilar F: package/bdwgc/ F: package/guile/ @@ -2648,11 +2697,11 @@ F: board/librecomputer/lafrite/ F: board/nexbox/a95x/ F: board/openblocks/a6/ F: board/orangepi/ -F: board/roseapplepi/ F: board/visionfive/ F: boot/shim/ F: configs/avenger96_defconfig F: configs/beagleboneai_defconfig +F: configs/imx93frdm_defconfig F: configs/lafrite_defconfig F: configs/minnowboard_max_defconfig F: configs/nexbox_a95x_defconfig @@ -2660,9 +2709,9 @@ F: configs/nezha_defconfig F: configs/openblocks_a6_defconfig F: configs/orangepi_pc_defconfig F: configs/orangepi_r1_defconfig -F: configs/roseapplepi_defconfig F: configs/sheevaplug_defconfig F: configs/visionfive_defconfig +F: package/agec/ F: package/bats-core/ F: package/dfu-programmer/ F: package/docker-compose/ @@ -2694,9 +2743,12 @@ F: package/rnnoise/ F: package/sedutil/ F: package/tpm2-totp/ F: package/triggerhappy/ +F: package/ugetty/ F: package/wireguard-linux-compat/ F: package/wireguard-tools/ +F: support/testing/tests/package/test_agec.py F: support/testing/tests/package/test_docker_compose.py +F: support/testing/tests/package/test_haproxy.py F: support/testing/tests/package/test_python_hid.py N: Peter Seiderer @@ -2732,6 +2784,9 @@ F: package/psplash/ F: package/sispmctl/ F: package/zsh/ +N: Philip Molloy +F: package/adsp-ldr/ + N: Philipp Richter F: package/libtorrent-rasterbar/ @@ -2780,16 +2835,9 @@ F: package/libdvbpsi/ F: package/mraa/ F: package/synergy/ -N: Prabhu Sannachi -F: package/redis-plus-plus/ - N: Qais Yousef F: package/bpftrace/ -N: Rafal Susz -F: board/avnet/s6lx9_microboard/ -F: configs/s6lx9_microboard_defconfig - N: Rafał Miłecki F: board/broadcom/northstar/ F: configs/broadcom_northstar_defconfig @@ -2802,7 +2850,6 @@ F: package/glog/ F: package/gssdp/ F: package/gupnp/ F: package/gupnp-av/ -F: package/let-me-create/ F: package/nanomsg/ N: Ralf Dragon @@ -2830,6 +2877,7 @@ F: support/testing/tests/package/sample_python_s3transfer.py F: support/testing/tests/package/sample_python_sdbus.py F: support/testing/tests/package/sample_python_sdbus_networkmanager.py F: support/testing/tests/package/sample_python_urllib3.py +F: support/testing/tests/package/test_harfbuzz.py F: support/testing/tests/package/test_nginx_modsecurity/ F: support/testing/tests/package/test_nginx_modsecurity.py F: support/testing/tests/package/test_python_jmespath.py @@ -2851,9 +2899,6 @@ N: Refik Tuzakli F: package/freescale-imx/ F: package/paho-mqtt-cpp/ -N: Rémi Rérolle -F: package/libfreeimage/ - N: Renaud Aubin F: package/libhttpparser/ @@ -2904,7 +2949,6 @@ F: configs/qemu_* F: configs/am574x_idk_defconfig F: configs/beagleboneai64_defconfig F: configs/beagley_ai_defconfig -F: package/alure/ F: package/aubio/ F: package/bcc/ F: package/binutils/ @@ -2936,7 +2980,6 @@ F: package/mesa3d/ F: package/minetest/ F: package/minetest-game/ F: package/ogre/ -F: package/openpowerlink/ F: package/physfs/ F: package/piglit/ F: package/python-libevdev/ @@ -2986,6 +3029,11 @@ F: package/lrzip/ N: Sam Voss F: package/ripgrep/ +N: Sebastian Michel +F: package/python-servestatic/ +F: support/testing/tests/package/sample_python_servestatic.py +F: support/testing/tests/package/test_python_servestatic.py + N: Sébastien Szymanski F: board/armadeus/ F: configs/armadeus* @@ -2999,7 +3047,6 @@ F: package/wlr-randr/ N: Semyon Kolganov F: package/fmt/ -F: package/libbson/ F: package/lua-resty-http/ F: package/mpir/ @@ -3038,11 +3085,9 @@ F: package/aoetools/ F: package/asn1c/ F: package/azure-iot-sdk-c/ F: package/curlpp/ -F: package/daq/ F: package/libgdiplus/ F: package/pimd/ F: package/sloci-image/ -F: package/snort/ F: package/stella/ F: package/tio/ F: package/traceroute/ @@ -3050,6 +3095,19 @@ F: package/tunctl/ F: package/ubus/ F: package/wolfssl/ +N: Shubham Chakraborty +F: package/bash-completion/ +F: package/ccache/ +F: package/dos2unix/ +F: package/font-awesome/ +F: package/htop/ +F: package/hyperfine/ +F: package/libenca/ +F: package/pv/ +F: package/screenfetch/ +F: package/unrar/ +F: package/xterm/ + N: Simon Dawson F: boot/at91bootstrap3/ F: package/cppzmq/ @@ -3057,9 +3115,6 @@ F: package/czmq/ F: package/filemq/ F: package/googlefontdirectory/ F: package/jansson/ -F: package/jquery-ui/ -F: package/jquery-ui-themes/ -F: package/json-javascript/ F: package/lcdapi/ F: package/libfreefare/ F: package/libjson/ @@ -3075,7 +3130,6 @@ F: package/neard/ F: package/neardal/ F: package/owl-linux/ F: package/rapidjson/ -F: package/sconeserver/ F: package/sound-theme-borealis/ F: package/sound-theme-freedesktop/ F: package/vlc/ @@ -3141,7 +3195,6 @@ F: package/libcli/ N: Steve Kenton F: package/dvdauthor/ -F: package/dvdrw-tools/ F: package/memtest86/ F: package/mjpegtools/ F: package/udftools/ @@ -3184,17 +3237,14 @@ F: package/x265/ N: Thomas Bonnefille F: board/pine64/star64 F: configs/pine64_star64_defconfig -F: package/starfive-spltool/ N: Thomas Claveirole F: package/fcgiwrap/ -F: package/openlayers/ -F: package/vuejs/ -F: package/vuejs-router/ N: Thomas Devoogdt F: package/fluent-bit/ F: package/libsoup3/ +F: package/yq/ N: Thomas Huth F: package/ascii-invaders/ @@ -3202,7 +3252,27 @@ F: package/kvm-unit-tests/ F: package/xorcurses/ N: Thomas Perale -F: package/go/ +F: package/asterisk/ +F: package/bind/ +F: package/clamav/ +F: package/containerd/ +F: package/dpdk/ +F: package/gnupg2/ +F: package/haproxy/ +F: package/libopenssl/ +F: package/lxc/ +F: package/mariadb/ +F: package/mbedtls/ +F: package/nodejs/ +F: package/openjdk/ +F: package/php/ +F: package/python-django/ +F: package/suricata/ +F: package/subversion/ +F: package/tor/ +F: package/zabbix/ +F: support/scripts/cve-check +F: support/scripts/cve.py F: utils/generate-cyclonedx N: Thomas Petazzoni @@ -3229,7 +3299,6 @@ F: package/gcc/ F: package/genext2fs/ F: package/getent/ F: package/gnu-efi/ -F: package/heirloom-mailx/ F: package/igh-ethercat/ F: package/intltool/ F: package/jh71xx-tools/ @@ -3254,8 +3323,11 @@ F: package/pkg-autotools.mk F: package/pkg-generic.mk F: package/python3/ F: package/python-augeas/ +F: package/python-crccheck/ F: package/python-flask-expects-json/ +F: package/python-fs/ F: package/python-git/ +F: package/python-pyfatfs/ F: package/python-qrcode/ F: package/python-serial/ F: package/python-unittest-xml-reporting/ @@ -3267,6 +3339,7 @@ F: package/rt-tests/ F: package/rtc-tools/ F: package/sam-ba/ F: package/scons/ +F: package/snagboot/ F: package/squashfs/ F: package/tinifier/ F: package/wayland/ @@ -3280,13 +3353,24 @@ F: support/testing/tests/package/sample_python_augeas.py F: support/testing/tests/package/sample_python_flask.py F: support/testing/tests/package/sample_python_flask_expects_json.py F: support/testing/tests/package/sample_python_git.py +F: support/testing/tests/package/sample_python_pyudev.py F: support/testing/tests/package/sample_python_unittest_xml_reporting.py +F: support/testing/tests/package/test_bpftrace.py +F: support/testing/tests/package/test_bpftrace/linux-bpftrace.fragment F: support/testing/tests/package/test_nodejs.py F: support/testing/tests/package/test_python_augeas.py +F: support/testing/tests/package/test_python_crccheck.py F: support/testing/tests/package/test_python_flask.py F: support/testing/tests/package/test_python_flask_expects_json.py +F: support/testing/tests/package/test_python_fs.py F: support/testing/tests/package/test_python_git.py +F: support/testing/tests/package/test_python_pyfatfs.py +F: support/testing/tests/package/test_python_pyudev.py +F: support/testing/tests/package/test_python_pyusb.py +F: support/testing/tests/package/test_python_serial.py +F: support/testing/tests/package/test_snagboot.py F: support/testing/tests/package/test_python_unittest_xml_reporting.py +F: support/testing/tests/package/test_python_xmodem.py F: support/testing/tests/toolchain/test_external_arm.py F: toolchain/ @@ -3308,6 +3392,9 @@ F: package/kmemd/ N: Torben Voltmer F: package/espflash/ +N: Trammell Hudson +F: package/nqptp/ + N: Tudor Holton F: package/openjdk/ @@ -3333,29 +3420,42 @@ F: package/llvm-project/llvm/ N: Vanya Sergeev F: package/lua-periphery/ -N: Viacheslav Bocharov +N: Viacheslav Bocharov +F: package/amlogic-boot-fip/ F: package/rtl8822cs/ N: Victor Huesca F: support/testing/tests/core/test_root_password.py +N: Vincent Cruz +F: package/python-transitions/ + N: Vincent Jardin F: board/nvidia/bf3/ F: configs/nvidia_bf3_defconfig F: package/bfscripts/ F: package/dpdk/ F: package/libecoli/ +F: package/libnss-ato/ +F: package/libyang-cpp/ +F: package/python-libyang/ +F: package/python-sysv-ipc/ +F: package/sysrepo-cpp/ N: Vincent Prince F: package/nss-myhostname/ F: package/utp_com/ N: Vincent Stehlé +F: board/aarch64-efi/ F: board/arm/fvp-ebbr/ +F: board/compulab/iot-gate-imx8-ebbr/ F: board/pine64/rockpro64-ebbr/ F: board/qemu/aarch64-ebbr/ F: board/qemu/arm-ebbr/ +F: configs/aarch64_efi_defconfig F: configs/arm_fvp_ebbr_defconfig +F: configs/iot-gate-imx8_ebbr_defconfig F: configs/qemu_aarch64_ebbr_defconfig F: configs/qemu_arm_ebbr_defconfig F: configs/rockpro64_ebbr_defconfig @@ -3363,10 +3463,17 @@ F: package/edk2-non-osi/ F: support/testing/tests/boot/test_edk2.py N: Vincent Stehlé +F: arch/Config.in.hppa +F: arch/arch.mk.hppa F: board/arm/foundation-v8/ F: board/bananapi/bananapi-m2-zero/ +F: board/hp/9000/ +F: board/qemu/hppa-b160l/ +F: boot/palo/ F: configs/arm_foundationv8_defconfig F: configs/bananapi_m2_zero_defconfig +F: configs/hp_9000_defconfig +F: configs/qemu_hppa_b160l_defconfig F: configs/uevm5432_defconfig F: package/i7z/ F: package/msr-tools/ @@ -3381,15 +3488,12 @@ F: support/testing/tests/package/test_zerofree.py N: Vinicius Tinti F: package/python-thrift/ -N: Vivien Didelot -F: board/technologic/ts5500/ -F: configs/ts5500_defconfig - N: Vladimir Oltean F: package/qoriq-ddr-phy-binary/ F: package/qoriq-firmware-inphi/ F: package/qoriq-mc-binary/ F: package/qoriq-mc-utils/ +F: package/qoriq-restool/ N: Volkov Viacheslav F: package/v4l2grab/ @@ -3404,14 +3508,20 @@ F: board/stmicroelectronics/stm32f746-disco/ F: configs/qemu_riscv32_nommu_virt_defconfig F: configs/stm32f746_disco_sd_defconfig F: package/asterisk/ +F: package/chawan/ F: package/evilwm/ F: package/fbv/ -F: package/libjwt/ +F: package/libpam-pkcs11/ F: package/mksh/ +F: package/nim/ +F: package/perl-cgi/ +F: package/perl-cgi-session/ +F: package/perl-log-message/ +F: package/perl-log-message-simple/ +F: package/perl-switch/ F: package/ruby/ F: package/uclibc/ F: package/uclibc-ng-test/ -F: package/zabbix/ F: support/testing/tests/package/test_ruby.py N: Will Newton @@ -3450,6 +3560,17 @@ F: boot/ti-k3-r5-loader/ F: configs/ti_am62x_sk_defconfig F: configs/ti_am64x_sk_defconfig +N: Xukai Wang +F: package/python-cloudpickle/ +F: package/python-farama-notifications/ +F: package/python-gymnasium/ +F: support/testing/tests/package/sample_python_cloudpickle.py +F: support/testing/tests/package/sample_python_farama_notifications.py +F: support/testing/tests/package/sample_python_gymnasium.py +F: support/testing/tests/package/test_python_cloudpickle.py +F: support/testing/tests/package/test_python_farama_notifications.py +F: support/testing/tests/package/test_python_gymnasium.py + N: Yair Ben Avraham F: package/casync/ F: package/gloox/ @@ -3457,7 +3578,13 @@ F: package/tpm2-pkcs11/ N: Yann E. MORIN F: .editorconfig +F: package/amazon-ecr-credential-helper/ +F: package/distribution-registry/ +F: package/docker-credential-acr-env/ +F: package/docker-credential-gcr/ F: package/gpsd/ +F: package/mosquitto/ +F: package/python-humanfriendly/ F: package/skopeo/ N: Yegor Yefremov @@ -3467,7 +3594,6 @@ F: package/acl/ F: package/attr/ F: package/avrdude/ F: package/boost/ -F: package/bootstrap/ F: package/cannelloni/ F: package/can-utils/ F: package/circus/ @@ -3475,12 +3601,12 @@ F: package/dhcpcd/ F: package/feh/ F: package/hostapd/ F: package/imlib2/ -F: package/jquery-datetimepicker/ -F: package/jquery-sidebar/ F: package/kmod/ +F: package/libaec/ F: package/libftdi1/ F: package/libical/ F: package/libmbim/ +F: package/libmicrohttpd/ F: package/libndp/ F: package/libnftnl/ F: package/libqmi/ @@ -3489,6 +3615,7 @@ F: package/libsoc/ F: package/libsocketcan/ F: package/libubox/ F: package/libuci/ +F: package/libwebsockets/ F: package/libxmlb/ F: package/libxmlrpc/ F: package/linux-firmware/ @@ -3527,16 +3654,21 @@ F: utils/scanpypi N: Yunhao Tian F: package/libopenaptx/ -N: Zoltan Gyarmati +N: Zoltan Gyarmati F: package/crudini/ F: package/grantlee/ F: package/libusb/ F: package/libusb-compat/ F: package/proj/ F: package/python-iniparse/ -F: package/qjson/ F: package/qt6/qt6core5compat/ F: package/quazip/ F: package/shapelib/ F: package/simple-mail/ F: package/tinc/ +F: support/testing/tests/package/test_libusb_compat.py +F: support/testing/tests/package/test_libusb_compat/ +F: support/testing/tests/package/test_quazip.py + +N: Shubham Chakraborty +F: package/zstd/ diff --git a/Makefile b/Makefile index d4ad4629c0b..9b62da3e406 100644 --- a/Makefile +++ b/Makefile @@ -92,9 +92,9 @@ all: .PHONY: all # Set and export the version string -export BR2_VERSION := 2025.08-rc3 +export BR2_VERSION := 2026.11-git # Actual time the release is cut (for reproducible builds) -BR2_VERSION_EPOCH = 1756360000 +BR2_VERSION_EPOCH = 1788535000 # Save running make version since it's clobbered by the make package RUNNING_MAKE_VERSION := $(MAKE_VERSION) @@ -125,7 +125,8 @@ endif noconfig_targets := menuconfig nconfig gconfig xconfig config oldconfig randconfig \ defconfig %_defconfig allyesconfig allnoconfig alldefconfig syncconfig release \ randpackageconfig allyespackageconfig allnopackageconfig \ - print-version olddefconfig distclean manual manual-% check-package + print-version olddefconfig distclean manual manual-% check-package \ + check-package-external show-info-all # Some global targets do not trigger a build, but are used to collect # metadata, or do various checks. When such targets are triggered, @@ -141,7 +142,7 @@ nobuild_targets := source %-source \ clean distclean help show-targets graph-depends \ %-graph-depends %-show-depends %-show-version \ graph-build graph-size list-defconfigs \ - savedefconfig update-defconfig printvars show-vars + savedefconfig update-defconfig printvars show-vars show-info-all ifeq ($(MAKECMDGOALS),) BR_BUILDING = y else ifneq ($(filter-out $(nobuild_targets),$(MAKECMDGOALS)),) @@ -235,6 +236,13 @@ BR2_CONFIG = $(CONFIG_DIR)/.config ifeq ($(filter $(noconfig_targets),$(MAKECMDGOALS)),) -include $(BR2_CONFIG) endif +# show-info-all needs to access the PACKAGES_ALL variable. This variable +# contains a reference to every package present in Buildroot. +# Since the 'show-info-all' command might be used without actually having a +# dotconfig this condition is forced to be set true. +ifeq ($(MAKECMDGOALS),show-info-all) +BR2_HAVE_DOT_CONFIG = y +endif ifeq ($(BR2_PER_PACKAGE_DIRECTORIES),) # Disable top-level parallel build if per-package directories is not @@ -601,6 +609,16 @@ prepare-sdk: world @$(call MESSAGE,"Preparing the SDK") $(INSTALL) -m 755 $(TOPDIR)/support/misc/relocate-sdk.sh $(HOST_DIR)/relocate-sdk.sh mkdir -p $(HOST_DIR)/share/buildroot + (\ + export LC_ALL=C; \ + grep -lr '$(HOST_DIR)' '$(HOST_DIR)' | while read -r FILE; do \ + if file -b --mime-type "$$FILE" | grep -q '^text/' && \ + [ "$$FILE" != '$(HOST_DIR)/share/buildroot/sdk-location' ] && \ + [ "$$FILE" != '$(HOST_DIR)/share/buildroot/sdk-relocs' ]; then \ + echo "$$FILE"; \ + fi; \ + done \ + ) | sed -e 's|^$(HOST_DIR)|.|g' > $(HOST_DIR)/share/buildroot/sdk-relocs echo $(HOST_DIR) > $(HOST_DIR)/share/buildroot/sdk-location BR2_SDK_PREFIX ?= $(GNU_TARGET_NAME)_sdk-buildroot @@ -781,19 +799,12 @@ endif # For a merged /usr, ensure that /lib, /bin and /sbin and their /usr # counterparts are appropriately setup as symlinks ones to the others. -ifeq ($(BR2_ROOTFS_MERGED_USR),y) - - $(foreach d, $(call qstrip,$(BR2_ROOTFS_OVERLAY)), \ - @$(call MESSAGE,"Sanity check in overlay $(d)")$(sep) \ - $(Q)not_merged_dirs="$$(support/scripts/check-merged-usr.sh $(d))"; \ - test -n "$$not_merged_dirs" && { \ - echo "ERROR: The overlay in $(d) is not" \ - "using a merged /usr for the following directories:" \ - $$not_merged_dirs; \ - exit 1; \ - } || true$(sep)) - -endif # merged /usr + @$(call MESSAGE,"Sanity check in overlays $(call qstrip,$(BR2_ROOTFS_OVERLAY))") + support/scripts/check-merged \ + -t overlay \ + $(if $(BR2_ROOTFS_MERGED_USR),-u) \ + $(if $(BR2_ROOTFS_MERGED_BIN),-b) \ + $(call qstrip,$(BR2_ROOTFS_OVERLAY)) $(foreach d, $(call qstrip,$(BR2_ROOTFS_OVERLAY)), \ @$(call MESSAGE,"Copying overlay $(d)")$(sep) \ @@ -923,15 +934,22 @@ check-dependencies: $(TOPDIR)/support/scripts/graph-depends -C .PHONY: show-info -show-info: +show-info: show-info-inner +show-info: SHOW_INFO_PACKAGES = \ + $(foreach i,$(PACKAGES) $(TARGETS_ROOTFS), \ + $(i) $($(call UPPERCASE,$(i))_FINAL_RECURSIVE_DEPENDENCIES) \ + ) + +.PHONY: show-info-all +show-info-all: show-info-inner +show-info-all: SHOW_INFO_PACKAGES = $(PACKAGES_ALL) + +.PHONY: show-info-inner +show-info-inner: @: $(info $(call clean-json, \ { $(foreach p, \ - $(sort $(foreach i,$(PACKAGES) $(TARGETS_ROOTFS), \ - $(i) \ - $($(call UPPERCASE,$(i))_FINAL_RECURSIVE_DEPENDENCIES) \ - ) \ - ), \ + $(sort $(SHOW_INFO_PACKAGES)), \ $(call json-info,$(call UPPERCASE,$(p)))$(comma) \ ) } \ ) \ @@ -1202,6 +1220,8 @@ help: @echo ' external-deps - list external packages used' @echo ' legal-info - generate info about license compliance' @echo ' show-info - generate info about packages, as a JSON blurb' + @echo ' show-info-all - generate info about all packages in Buildroot,' + @echo ' regardless of configuration or target architecture' @echo ' pkg-stats - generate info about packages as JSON and HTML' @echo ' printvars - dump internal variables selected with VARS=...' @echo ' show-vars - dump all internal variables as a JSON blurb; use VARS=...' @@ -1262,10 +1282,29 @@ release: print-version: @echo $(BR2_VERSION_FULL) +# $(1): br2-external path +# $(2): br2-external description +define check-package-external + @$(call MESSAGE,"Checking packages in $(2)") + $(Q)if [ -r "$(1)/.checkpackageignore" ]; then \ + ignore="--ignore-list=$(1)/.checkpackageignore" ; \ + else \ + ignore=""; \ + fi ; \ + $(TOPDIR)/utils/check-package \ + --br2-external $${ignore} \ + `git -C $(1) ls-tree -r --format='$(1)/%(path)' HEAD` +endef + check-package: $(Q)./utils/check-package `git ls-tree -r --name-only HEAD` \ --ignore-list=$(TOPDIR)/.checkpackageignore +check-package-external: + $(foreach name,$(BR2_EXTERNAL_NAMES),\ + $(call check-package-external,$(BR2_EXTERNAL_$(name)_PATH),\ + $(BR2_EXTERNAL_$(name)_DESC))$(sep)) + .PHONY: .checkpackageignore .checkpackageignore: $(Q)./utils/check-package --failed-only `git ls-tree -r --name-only HEAD` \ diff --git a/README b/README index 008e996f5f3..143b476be6a 100644 --- a/README +++ b/README @@ -3,7 +3,7 @@ Linux systems through cross-compilation. The documentation can be found in docs/manual. You can generate a text document with 'make manual-text' and read output/docs/manual/manual.text. -Online documentation can be found at http://buildroot.org/docs.html +Online documentation can be found at https://buildroot.org/docs.html To build and use the buildroot stuff, do the following: diff --git a/SECURITY.md b/SECURITY.md new file mode 100644 index 00000000000..85740a15a50 --- /dev/null +++ b/SECURITY.md @@ -0,0 +1,38 @@ +# Security Policy + + [![OpenSSF Best Practices](https://www.bestpractices.dev/projects/12245/badge)](https://www.bestpractices.dev/projects/12245) + +## Security advisories + +Advisories for Buildroot security vulnerabilities are reported on the +developer's mailing list. A public archive can be consulted on +https://lists.buildroot.org/mailman/listinfo/buildroot + +Buildroot itself has a CPE to track its published vulnerabilities: +https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=buildroot + +The Buildroot project provides some ways for its users to track known +vulnerabilites in the packages included in the generated images, see: +- https://nightly.buildroot.org/manual.html#_details_about_packages + +In addition, detailed informations for all packages integrated with Buildroot +are updated daily on the following public web pages: +- https://security.buildroot.org/ +- https://autobuild.buildroot.org/stats/ + +## Reporting a Vulnerability + +To report a security vulnerability found in the Buildroot build system itself, +please send an email to [security@buildroot.org](mailto:security@buildroot.org). + +This is a private mailing list contacting the Buildroot maintainers only. + +## Vulnerabilities in packages + +Buildroot is a build system that cross-compiles packages from third-party +sources. The Buildroot developers are not responsible for security +vulnerabilities in these packages. Such vulnerabilities should be reported +directly to the upstream project that maintains the affected package. + +When vulnerabilities are fixed upstream, send a patch to update the affected +packages in Buildroot. diff --git a/arch/Config.in b/arch/Config.in index 34422c0d50c..7bfa174b5f7 100644 --- a/arch/Config.in +++ b/arch/Config.in @@ -29,14 +29,6 @@ config BR2_arcle 32-bit CPUs that can be used from deeply embedded to high performance host applications. Little endian. -config BR2_arceb - bool "ARC (big endian)" - select BR2_USE_MMU - help - Synopsys' DesignWare ARC Processor Cores are a family of - 32-bit CPUs that can be used from deeply embedded to high - performance host applications. Big endian. - config BR2_arm bool "ARM (little endian)" # MMU support is set by the subarchitecture file, arch/Config.in.arm @@ -73,6 +65,14 @@ config BR2_aarch64_be http://www.arm.com/products/processors/instruction-set-architectures/armv8-architecture.php http://en.wikipedia.org/wiki/ARM +config BR2_hppa + bool "HPPA" + select BR2_USE_MMU + help + Precision Architecture (a.k.a. PA-RISC) is a 32-bit + (big endian) architecture developed by Hewlett Packard. + https://en.wikipedia.org/wiki/PA-RISC + config BR2_i386 bool "i386" select BR2_USE_MMU @@ -325,6 +325,10 @@ config BR2_ARCH_NEEDS_GCC_AT_LEAST_16 bool select BR2_ARCH_NEEDS_GCC_AT_LEAST_15 +config BR2_ARCH_NEEDS_GCC_AT_LEAST_17 + bool + select BR2_ARCH_NEEDS_GCC_AT_LEAST_16 + # The following string values are defined by the individual # Config.in.$ARCH files config BR2_ARCH @@ -385,7 +389,7 @@ config BR2_BINFMT_SUPPORTS_SHARED config BR2_READELF_ARCH_NAME string -if BR2_arcle || BR2_arceb +if BR2_arcle source "arch/Config.in.arc" endif @@ -393,6 +397,10 @@ if BR2_arm || BR2_armeb || BR2_aarch64 || BR2_aarch64_be source "arch/Config.in.arm" endif +if BR2_hppa +source "arch/Config.in.hppa" +endif + if BR2_loongarch64 source "arch/Config.in.loongarch" endif diff --git a/arch/Config.in.arc b/arch/Config.in.arc index f367c491311..f250ae5eeb4 100644 --- a/arch/Config.in.arc +++ b/arch/Config.in.arc @@ -31,7 +31,7 @@ config BR2_archs38_full bool "ARC HS38 with Quad MAC & FPU" help Fully featured ARC HS with additional support for - - Dual- and quad multiply and MC oprations + - Dual- and quad multiply and MC operations - Double-precision FPU It corresponds to "hs38_slc_full" ARC HS template in @@ -59,19 +59,17 @@ config BR2_ARC_ATOMIC_EXT default y if BR2_archs4x_rel31 || BR2_archs4x config BR2_ARCH - default "arc" if BR2_arcle - default "arceb" if BR2_arceb + default "arc" config BR2_NORMALIZED_ARCH default "arc" config BR2_arc bool - default y if BR2_arcle || BR2_arceb + default y config BR2_ENDIAN - default "LITTLE" if BR2_arcle - default "BIG" if BR2_arceb + default "LITTLE" config BR2_GCC_TARGET_CPU default "arc700" if BR2_arc750d diff --git a/arch/Config.in.arm b/arch/Config.in.arm index a0bf6c3386c..eb5babe29b2 100644 --- a/arch/Config.in.arm +++ b/arch/Config.in.arm @@ -498,6 +498,12 @@ config BR2_tsv110 select BR2_ARCH_NEEDS_GCC_AT_LEAST_9 comment "armv8.4a cores" +config BR2_neoverse_v1 + bool "neoverse-V1 (aka zeus)" + depends on BR2_ARCH_IS_64 + select BR2_ARM_CPU_HAS_FP_ARMV8 + select BR2_ARM_CPU_ARMV8A + select BR2_ARCH_NEEDS_GCC_AT_LEAST_11 config BR2_saphira bool "saphira" depends on BR2_ARCH_IS_64 @@ -518,6 +524,12 @@ config BR2_neoverse_n2 select BR2_ARM_CPU_HAS_FP_ARMV8 select BR2_ARM_CPU_ARMV9A select BR2_ARCH_NEEDS_GCC_AT_LEAST_11 +config BR2_neoverse_v2 + bool "neoverse-V2 (aka demeter)" + depends on BR2_ARCH_IS_64 + select BR2_ARM_CPU_HAS_FP_ARMV8 + select BR2_ARM_CPU_ARMV9A + select BR2_ARCH_NEEDS_GCC_AT_LEAST_13 comment "armv9.2a cores" config BR2_cortex_a720 @@ -526,6 +538,18 @@ config BR2_cortex_a720 select BR2_ARM_CPU_HAS_FP_ARMV8 select BR2_ARM_CPU_ARMV9A select BR2_ARCH_NEEDS_GCC_AT_LEAST_14 +config BR2_neoverse_v3 + bool "neoverse-V3 (aka poseidon)" + depends on BR2_ARCH_IS_64 + select BR2_ARM_CPU_HAS_FP_ARMV8 + select BR2_ARM_CPU_ARMV9A + select BR2_ARCH_NEEDS_GCC_AT_LEAST_15 +config BR2_neoverse_v3ae + bool "neoverse-V3AE (aka poseidon)" + depends on BR2_ARCH_IS_64 + select BR2_ARM_CPU_HAS_FP_ARMV8 + select BR2_ARM_CPU_ARMV9A + select BR2_ARCH_NEEDS_GCC_AT_LEAST_15 endchoice config BR2_ARM_ENABLE_NEON @@ -918,12 +942,16 @@ config BR2_GCC_TARGET_CPU default "neoverse-n1" if BR2_neoverse_n1 default "tsv110" if BR2_tsv110 # armv8.4a + default "neoverse-v1" if BR2_neoverse_v1 default "saphira" if BR2_saphira # armv9.0a default "cortex-a710" if BR2_cortex_a710 default "neoverse-n2" if BR2_neoverse_n2 + default "neoverse-v2" if BR2_neoverse_v2 # armv9.2a default "cortex-a720" if BR2_cortex_a720 + default "neoverse-v3" if BR2_neoverse_v3 + default "neoverse-v3ae" if BR2_neoverse_v3ae config BR2_GCC_TARGET_ABI default "aapcs-linux" if BR2_arm || BR2_armeb diff --git a/arch/Config.in.hppa b/arch/Config.in.hppa new file mode 100644 index 00000000000..16c826dd9ea --- /dev/null +++ b/arch/Config.in.hppa @@ -0,0 +1,20 @@ +choice + prompt "Target Architecture Type" + help + Architecture type (or version) to use. + +config BR2_parisc11 + bool "PA-RISC 1.1" +endchoice + +config BR2_ARCH + default "hppa" + +config BR2_NORMALIZED_ARCH + default "parisc" + +config BR2_ENDIAN + default "BIG" + +config BR2_READELF_ARCH_NAME + default "HPPA" diff --git a/arch/Config.in.m68k b/arch/Config.in.m68k index 235cafacf5b..74a197934ff 100644 --- a/arch/Config.in.m68k +++ b/arch/Config.in.m68k @@ -23,6 +23,11 @@ choice help Specific CPU variant to use +config BR2_m68k_68000 + bool "68000" + select BR2_m68k_m68k + select BR2_SOFT_FLOAT + config BR2_m68k_68030 bool "68030" select BR2_m68k_m68k @@ -41,6 +46,7 @@ config BR2_m68k_cf5208 endchoice config BR2_GCC_TARGET_CPU + default "68000" if BR2_m68k_68000 default "68030" if BR2_m68k_68030 default "68040" if BR2_m68k_68040 default "5208" if BR2_m68k_cf5208 diff --git a/arch/Config.in.powerpc b/arch/Config.in.powerpc index 3f4d348d5fc..805bc9ce689 100644 --- a/arch/Config.in.powerpc +++ b/arch/Config.in.powerpc @@ -144,6 +144,16 @@ config BR2_powerpc_power9 select BR2_POWERPC_CPU_HAS_ALTIVEC select BR2_POWERPC_CPU_HAS_VSX select BR2_ARCH_NEEDS_GCC_AT_LEAST_6 +config BR2_powerpc_power10 + bool "power10" + select BR2_POWERPC_CPU_HAS_ALTIVEC + select BR2_POWERPC_CPU_HAS_VSX + select BR2_ARCH_NEEDS_GCC_AT_LEAST_11 +config BR2_powerpc_power11 + bool "power11" + select BR2_POWERPC_CPU_HAS_ALTIVEC + select BR2_POWERPC_CPU_HAS_VSX + select BR2_ARCH_NEEDS_GCC_AT_LEAST_15 endchoice config BR2_POWERPC_SOFT_FLOAT @@ -207,6 +217,8 @@ config BR2_GCC_TARGET_CPU default "power7" if BR2_powerpc_power7 default "power8" if BR2_powerpc_power8 default "power9" if BR2_powerpc_power9 + default "power10" if BR2_powerpc_power10 + default "power11" if BR2_powerpc_power11 config BR2_READELF_ARCH_NAME default "PowerPC" if BR2_powerpc diff --git a/arch/Config.in.riscv b/arch/Config.in.riscv index 23d095d1a66..299190f364e 100644 --- a/arch/Config.in.riscv +++ b/arch/Config.in.riscv @@ -45,6 +45,13 @@ config BR2_RISCV_ISA_RVV bool "Vector Instructions (V)" select BR2_ARCH_NEEDS_GCC_AT_LEAST_12 +config BR2_RISCV_ISA_EXTRA + string "Append extra RISC-V ISA extensions" + help + Extra ISA extensions to append to the ISA extensions string. + They are underscore-separated. For example, + "zba_zbb_zvl256b". + choice prompt "Target Architecture Size" default BR2_RISCV_64 diff --git a/arch/Config.in.x86 b/arch/Config.in.x86 index f9b32130b23..0a6d80bf032 100644 --- a/arch/Config.in.x86 +++ b/arch/Config.in.x86 @@ -20,6 +20,14 @@ config BR2_X86_CPU_HAS_AVX config BR2_X86_CPU_HAS_AVX2 bool +# BR2_X86_CPU_HAS_XOP is selected by the AMD Bulldozer family (bdver1 +# to bdver4), which is the only family implementing XOP. On those CPUs, +# gcc also enables the equally Bulldozer-specific FMA4 and LWP +# extensions (and TBM starting with bdver2). Those extensions were +# dropped again with Zen. +config BR2_X86_CPU_HAS_XOP + bool + # BR2_X86_CPU_HAS_AVX512 implies the following AVX512 extensions: # AVX512F, AVX512BW, AVX512CD, AVX512DQ, AVX512VL # This subset is common to Intel Xeon (excl Xeon Phi), AMD Zen 4, and @@ -35,7 +43,7 @@ config BR2_X86_CPU_HAS_AVX512 # https://gcc.gnu.org/onlinedocs/gcc-13.2.0/gcc/x86-Options.html choice prompt "Target Architecture Variant" - default BR2_x86_i586 if BR2_i386 + default BR2_x86_i686 if BR2_i386 depends on BR2_i386 || BR2_x86_64 help Specific CPU variant to use @@ -601,6 +609,7 @@ config BR2_x86_bulldozer select BR2_X86_CPU_HAS_SSSE3 select BR2_X86_CPU_HAS_SSE4 select BR2_X86_CPU_HAS_SSE42 + select BR2_X86_CPU_HAS_XOP config BR2_x86_piledriver bool "piledriver" select BR2_X86_CPU_HAS_MMX @@ -610,6 +619,7 @@ config BR2_x86_piledriver select BR2_X86_CPU_HAS_SSSE3 select BR2_X86_CPU_HAS_SSE4 select BR2_X86_CPU_HAS_SSE42 + select BR2_X86_CPU_HAS_XOP config BR2_x86_steamroller bool "steamroller" select BR2_X86_CPU_HAS_MMX @@ -619,6 +629,7 @@ config BR2_x86_steamroller select BR2_X86_CPU_HAS_SSSE3 select BR2_X86_CPU_HAS_SSE4 select BR2_X86_CPU_HAS_SSE42 + select BR2_X86_CPU_HAS_XOP select BR2_ARCH_NEEDS_GCC_AT_LEAST_4_8 config BR2_x86_excavator bool "excavator" @@ -631,6 +642,7 @@ config BR2_x86_excavator select BR2_X86_CPU_HAS_SSE42 select BR2_X86_CPU_HAS_AVX select BR2_X86_CPU_HAS_AVX2 + select BR2_X86_CPU_HAS_XOP select BR2_ARCH_NEEDS_GCC_AT_LEAST_4_9 config BR2_x86_zen bool "zen" diff --git a/arch/arch.mk.hppa b/arch/arch.mk.hppa new file mode 100644 index 00000000000..f4a9ac41d23 --- /dev/null +++ b/arch/arch.mk.hppa @@ -0,0 +1,11 @@ +# +# Configure the GCC_TARGET_ARCH variable. +# + +ifeq ($(BR2_hppa),y) + +ifeq ($(BR2_parisc11),y) +GCC_TARGET_ARCH := 1.1 +endif + +endif diff --git a/arch/arch.mk.riscv b/arch/arch.mk.riscv index ee5c434b971..e47666eadd6 100644 --- a/arch/arch.mk.riscv +++ b/arch/arch.mk.riscv @@ -39,4 +39,9 @@ ifeq ($(BR2_TOOLCHAIN_GCC_AT_LEAST_12),y) GCC_TARGET_ARCH := $(GCC_TARGET_ARCH)_zicsr_zifencei endif +ARCH_RISV_ISA_EXTRA = $(call qstrip, $(BR2_RISCV_ISA_EXTRA)) +ifneq ($(ARCH_RISV_ISA_EXTRA),) +GCC_TARGET_ARCH := $(GCC_TARGET_ARCH)_$(ARCH_RISV_ISA_EXTRA) +endif + endif diff --git a/board/aarch64-efi/genimage-efi.cfg b/board/aarch64-efi/genimage-efi.cfg index 158deab87dc..207fc3e3bcc 100644 --- a/board/aarch64-efi/genimage-efi.cfg +++ b/board/aarch64-efi/genimage-efi.cfg @@ -24,7 +24,7 @@ image disk.img { } partition root { - partition-type-uuid = b921b045-1df0-41c3-af44-4c6f280d3fae + partition-type-uuid = root-arm64 image = "rootfs.ext2" } } diff --git a/board/aarch64-efi/linux-pmem-netboot.fragment b/board/aarch64-efi/linux-pmem-netboot.fragment new file mode 100644 index 00000000000..8c3e9109197 --- /dev/null +++ b/board/aarch64-efi/linux-pmem-netboot.fragment @@ -0,0 +1,3 @@ +CONFIG_BLK_DEV_PMEM=y +CONFIG_LIBNVDIMM=y +CONFIG_OF_PMEM=y diff --git a/board/aarch64-efi/patches/linux/linux.hash b/board/aarch64-efi/patches/linux/linux.hash index 50983eb42bf..7cc4ece4bc2 100644 --- a/board/aarch64-efi/patches/linux/linux.hash +++ b/board/aarch64-efi/patches/linux/linux.hash @@ -1,2 +1,2 @@ # From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc -sha256 62148e7e17f54c4a5ab5e75ad4882682c54bee818948be61a5963234fc0849fc linux-6.11.11.tar.xz +sha256 8d1934a72a185f1be6b56e3ad8ea31fd9a381ffec0346c69f06c90d776da7cb8 linux-6.18.14.tar.xz diff --git a/board/aarch64-efi/readme.txt b/board/aarch64-efi/readme.txt index 0e7ea0b5dd7..259eb5b8c9d 100644 --- a/board/aarch64-efi/readme.txt +++ b/board/aarch64-efi/readme.txt @@ -48,6 +48,17 @@ alternative to QEMU_EFI.fd. You will also need to change the machine specification to "-M virt,secure=on" on qemu command line, to enable TrustZone support, and you will need to increase the memory with "-m 1024". +HTTP boot +--------- + +Some U-Boot and Devicetree based firmwares are capable of booting with UEFI from +HTTP(s). [4] + +The aarch64_efi_defconfig has appropriate persistent memory support compiled in +the Linux kernel to support this scenario. [5] + [1]: https://github.com/ARM-software/ebbr [2]: https://developer.arm.com/architectures/system-architectures/arm-systemready [3]: https://github.com/glikely/u-boot-tfa-build +[4]: https://docs.u-boot-project.org/en/latest/develop/uefi/uefi.html#uefi-http-boot-using-the-legacy-tcp-stack +[5]: https://github.com/ARM-software/edge-iot-arch-guide/blob/main/source/http-boot/pmem_node.md diff --git a/board/acmesystems/acqua-a5/dts/microchip/at91-sama5d3_acqua.dts b/board/acmesystems/acqua-a5/dts/microchip/at91-sama5d3_acqua.dts index 60be8a67cdf..4754c3cf1cc 100644 --- a/board/acmesystems/acqua-a5/dts/microchip/at91-sama5d3_acqua.dts +++ b/board/acmesystems/acqua-a5/dts/microchip/at91-sama5d3_acqua.dts @@ -281,11 +281,11 @@ status = "disabled"; }; - usb1: ohci@600000 { + usb1: usb@600000 { status = "okay"; }; - usb2: ehci@700000 { + usb2: usb@700000 { status = "okay"; }; diff --git a/board/acmesystems/acqua-a5/patches/linux/linux.hash b/board/acmesystems/acqua-a5/patches/linux/linux.hash index 2c86a53263e..67e419e2f0e 100644 --- a/board/acmesystems/acqua-a5/patches/linux/linux.hash +++ b/board/acmesystems/acqua-a5/patches/linux/linux.hash @@ -1,2 +1,2 @@ -# Locally calculated -sha256 6b19a3ae99423de2416964d67251d745910277af258b4c4c63e88fd87dbf0e27 linux-6.12.41.tar.xz +# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc +sha256 3712fc1ec839e4daac981176c8518912e8f452650aaedfe4381da4419613a431 linux-6.18.40.tar.xz diff --git a/board/acmesystems/aria-g25/genimage.cfg b/board/acmesystems/aria-g25/genimage.cfg deleted file mode 100644 index 29dc697153d..00000000000 --- a/board/acmesystems/aria-g25/genimage.cfg +++ /dev/null @@ -1,36 +0,0 @@ -# Minimal SD card image for the Acmesystems Aria G25 - -image boot.vfat { - vfat { - file zImage { - image = "zImage" - } - - file at91-ariag25.dtb { - image = "at91-ariag25.dtb" - } - - file boot.bin { - image = "at91sam9x5_aria-sdcardboot-linux-zimage-dt-3.10.3.bin" - } - } - - size = 16M -} - -image sdcard.img { - hdimage { - } - - partition boot { - partition-type = 0xC - bootable = "true" - image = "boot.vfat" - } - - partition rootfs { - partition-type = 0x83 - image = "rootfs.ext4" - size = 512M - } -} diff --git a/board/acmesystems/aria-g25/patches/at91bootstrap3/at91bootstrap3.hash b/board/acmesystems/aria-g25/patches/at91bootstrap3/at91bootstrap3.hash deleted file mode 100644 index 6edf3d3345e..00000000000 --- a/board/acmesystems/aria-g25/patches/at91bootstrap3/at91bootstrap3.hash +++ /dev/null @@ -1,2 +0,0 @@ -# Locally calculated -sha256 5ea2a8fed1ba0024229c6f6d77176679e1b24791bdbce8e285634013d4a93551 at91bootstrap3-v3.10.3-git4.tar.gz diff --git a/board/acmesystems/aria-g25/patches/linux/linux.hash b/board/acmesystems/aria-g25/patches/linux/linux.hash deleted file mode 100644 index 81824a41ee4..00000000000 --- a/board/acmesystems/aria-g25/patches/linux/linux.hash +++ /dev/null @@ -1,2 +0,0 @@ -# Locally calculated -sha256 6c5e4d3c87feadbfdb9f7d2e46f3f120b00286ba380491c5956708e0b94232c8 linux-4.19.315.tar.xz diff --git a/board/acmesystems/aria-g25/readme.txt b/board/acmesystems/aria-g25/readme.txt deleted file mode 100644 index cb9e9abf778..00000000000 --- a/board/acmesystems/aria-g25/readme.txt +++ /dev/null @@ -1,44 +0,0 @@ -Acme Systems Aria G25 - -Build instructions -================== - -To build an image for the Aria G25 choose the configuration -corresponding to the Aria variant. - -For 128MB RAM variant type: - -$ make acmesystems_aria_g25_128mb_defconfig - -else for 256MB RAM variant type: - -$ make acmesystems_aria_g25_256mb_defconfig - -To customize the configuration choosed type: - -$ make menuconfig - -When you are ready to start building Buildroot type: - -$ make - -How to write the microSD card -============================= - -Once the build process is finished you will have an image called -"sdcard.img" in the output/images/ directory. - -Write the bootable SD card image "sdcard.img" onto an SD card with -"dd" command: - - $ sudo dd if=output/images/sdcard.img of=/dev/sdX - -Assuming your Aria G25 baseboard has a MicroSD socket, for example -with the Terra baseboard, insert the microSD card into the baseboard -slot and power it. - -To get the kernel log messages you can use a DPI cable -(http://www.acmesystems.it/DPI) - -You can find additional informations, tutorials and a very -comprehensive documentation on http://www.acmesystems.it/aria. diff --git a/board/acmesystems/arietta-g25/genimage.cfg b/board/acmesystems/arietta-g25/genimage.cfg deleted file mode 100644 index 3b67a474cd0..00000000000 --- a/board/acmesystems/arietta-g25/genimage.cfg +++ /dev/null @@ -1,36 +0,0 @@ -# Minimal SD card image for the Acmesystems Arietta G25 - -image boot.vfat { - vfat { - file zImage { - image = "zImage" - } - - file acme-arietta.dtb { - image = "at91-ariettag25.dtb" - } - - file boot.bin { - image = "at91sam9x5_arietta-sdcardboot-linux-zimage-dt-3.10.3.bin" - } - } - - size = 16M -} - -image sdcard.img { - hdimage { - } - - partition boot { - partition-type = 0xC - bootable = "true" - image = "boot.vfat" - } - - partition rootfs { - partition-type = 0x83 - image = "rootfs.ext4" - size = 512M - } -} diff --git a/board/acmesystems/arietta-g25/patches/at91bootstrap3/at91bootstrap3.hash b/board/acmesystems/arietta-g25/patches/at91bootstrap3/at91bootstrap3.hash deleted file mode 100644 index 6edf3d3345e..00000000000 --- a/board/acmesystems/arietta-g25/patches/at91bootstrap3/at91bootstrap3.hash +++ /dev/null @@ -1,2 +0,0 @@ -# Locally calculated -sha256 5ea2a8fed1ba0024229c6f6d77176679e1b24791bdbce8e285634013d4a93551 at91bootstrap3-v3.10.3-git4.tar.gz diff --git a/board/acmesystems/arietta-g25/patches/linux/linux.hash b/board/acmesystems/arietta-g25/patches/linux/linux.hash deleted file mode 100644 index 81824a41ee4..00000000000 --- a/board/acmesystems/arietta-g25/patches/linux/linux.hash +++ /dev/null @@ -1,2 +0,0 @@ -# Locally calculated -sha256 6c5e4d3c87feadbfdb9f7d2e46f3f120b00286ba380491c5956708e0b94232c8 linux-4.19.315.tar.xz diff --git a/board/acmesystems/arietta-g25/readme.txt b/board/acmesystems/arietta-g25/readme.txt deleted file mode 100644 index f356b0a2645..00000000000 --- a/board/acmesystems/arietta-g25/readme.txt +++ /dev/null @@ -1,49 +0,0 @@ -Acme Systems Arietta G25 - -Intro -===== - -This default configuration will allow you to start experimenting with the -buildroot environment for the Arietta G25. With the current configuration -it will bring-up the board, and allow access through the serial console. - -You can find additional informations, tutorials and a very comprehensive -documentation on http://www.acmesystems.it/arietta. - -Build instructions -================== - -To build an image for the Arietta G25 choose the configuration -corresponding to the Arietta variant. - -For 128MB RAM variant type: - -$ make acmesystems_arietta_g25_128mb_defconfig - -else for 256MB RAM variant type: - -$ make acmesystems_arietta_g25_256mb_defconfig - -To customize the configuration chosen type: - -$ make menuconfig - -When you are ready to start building Buildroot type: - -$ make - -How to write the microSD card -============================= - -Once the build process is finished you will have an image called "sdcard.img" -in the output/images/ directory. - -Copy the bootable "sdcard.img" onto an SD card with "dd": - - $ sudo dd if=output/images/sdcard.img of=/dev/sdX - -Insert the microSD card into the Arietta slot and power it. - -The image just built is fairly basic and the only output -you will get is on serial console, please consider to use a DPI -cable (http://www.acmesystems.it/DPI) diff --git a/board/amarula/vyasa/patches/linux/linux.hash b/board/amarula/vyasa/patches/linux/linux.hash index b763fc947a9..f83883b936d 100644 --- a/board/amarula/vyasa/patches/linux/linux.hash +++ b/board/amarula/vyasa/patches/linux/linux.hash @@ -1,2 +1,2 @@ -# Locally calculated -sha256 880ace63ca2291b8b639e9bd862cc828649d3e1e00ccfee5861473debd2e4dec linux-6.1.91.tar.xz +# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc +sha256 37f0c5d5c242c1d604e87d48f08795e861a5a85f725b4ca11d0a538f12ff8cff linux-6.18.8.tar.xz diff --git a/board/amarula/vyasa/patches/uboot/uboot.hash b/board/amarula/vyasa/patches/uboot/uboot.hash index 5e017f54990..b6a925ea4e8 100644 --- a/board/amarula/vyasa/patches/uboot/uboot.hash +++ b/board/amarula/vyasa/patches/uboot/uboot.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 50b4482a505bc281ba8470c399a3c26e145e29b23500bc35c50debd7fa46bdf8 u-boot-2022.10.tar.bz2 +sha256 b60d5865cefdbc75da8da4156c56c458e00de75a49b80c1a2e58a96e30ad0d54 u-boot-2026.01.tar.bz2 diff --git a/board/aarch64-efi/patches/linux-headers/linux-headers.hash b/board/andes/ae350/patches/linux-headers/linux-headers.hash similarity index 100% rename from board/aarch64-efi/patches/linux-headers/linux-headers.hash rename to board/andes/ae350/patches/linux-headers/linux-headers.hash diff --git a/board/andes/ae350/patches/linux/linux.hash b/board/andes/ae350/patches/linux/linux.hash new file mode 100644 index 00000000000..1a6a136b71b --- /dev/null +++ b/board/andes/ae350/patches/linux/linux.hash @@ -0,0 +1,2 @@ +# Locally calculated +sha256 c71af3d2c86c0a0deca4f54b51d1c35217082b030052cc3513dc42e852652733 linux-v6.0.y-andes.tar.gz diff --git a/board/andes/ae350/patches/opensbi/opensbi.hash b/board/andes/ae350/patches/opensbi/opensbi.hash new file mode 100644 index 00000000000..d7893a1deec --- /dev/null +++ b/board/andes/ae350/patches/opensbi/opensbi.hash @@ -0,0 +1,2 @@ +# Locally calculated +sha256 d11702103f177a2914e94eec57ce5ed820296d874f6b6525c4482e55d71a3667 opensbi-1.6.tar.gz diff --git a/board/andes/ae350/patches/uboot/0001-mmc-ftsdc010_mci-Support-DTS-of-ftsdc010-driver-for-.patch b/board/andes/ae350/patches/uboot/0001-mmc-ftsdc010_mci-Support-DTS-of-ftsdc010-driver-for-.patch deleted file mode 100644 index be89a1563f7..00000000000 --- a/board/andes/ae350/patches/uboot/0001-mmc-ftsdc010_mci-Support-DTS-of-ftsdc010-driver-for-.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 16aad5594e08550295ea3c12c1c9ed6f64774748 Mon Sep 17 00:00:00 2001 -From: Rick Chen -Date: Tue, 29 Mar 2022 13:41:10 +0800 -Subject: [PATCH] mmc: ftsdc010_mci: Support DTS of ftsdc010 driver for - generic dma - -The ftsdc010 driver has been implemented for generic dma in Linux -kernel. And its compatible is andestech,atfsdc010g to distinguish -the legacy andestech,atfsdc010 which is not for generic dma. - -Althought the ftsdc010_mci driver in U-Boot does not use dma, but -it still can work well with the mmc node for generic dma. So add -the compatible string to support it. - -Signed-off-by: Rick Chen - -Upstream-Status: Pending - -Signed-off-by: Yu Chien Peter Lin ---- - drivers/mmc/ftsdc010_mci.c | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/drivers/mmc/ftsdc010_mci.c b/drivers/mmc/ftsdc010_mci.c -index 570d54cf9d..65b1d447a8 100644 ---- a/drivers/mmc/ftsdc010_mci.c -+++ b/drivers/mmc/ftsdc010_mci.c -@@ -460,6 +460,7 @@ int ftsdc010_mmc_bind(struct udevice *dev) - - static const struct udevice_id ftsdc010_mmc_ids[] = { - { .compatible = "andestech,atfsdc010" }, -+ { .compatible = "andestech,atfsdc010g" }, - { } - }; - --- -2.34.1 - diff --git a/board/andes/ae350/patches/uboot/0002-spl-Align-device-tree-blob-address-at-8-byte-boundar.patch b/board/andes/ae350/patches/uboot/0002-spl-Align-device-tree-blob-address-at-8-byte-boundar.patch deleted file mode 100644 index 5080554ca1f..00000000000 --- a/board/andes/ae350/patches/uboot/0002-spl-Align-device-tree-blob-address-at-8-byte-boundar.patch +++ /dev/null @@ -1,42 +0,0 @@ -From 933ad8a59f7fd9b2088badc3e97167d750a40b5a Mon Sep 17 00:00:00 2001 -From: Bin Meng -Date: Mon, 12 Jul 2021 11:52:31 +0800 -Subject: [PATCH] spl: Align device tree blob address at 8-byte boundary - -Since libfdt v1.6.1, a new requirement on the device tree address via: - - commit 5e735860c478 ("libfdt: Check for 8-byte address alignment in fdt_ro_probe_()") - -must be met that the device tree must be loaded in to memory at an -8-byte aligned address. - -Signed-off-by: Bin Meng - -This patch was imported from U-boot patchwork: -https://patchwork.ozlabs.org/project/uboot/patch/20210712035231.26475-1-bmeng.cn@gmail.com/ - -Signed-off-by: Yu Chien Peter Lin ---- - common/spl/spl_fit.c | 6 ++++++ - 1 file changed, 6 insertions(+) - -diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c -index a35be529..a76ad14a 100644 ---- a/common/spl/spl_fit.c -+++ b/common/spl/spl_fit.c -@@ -382,6 +382,12 @@ static int spl_fit_append_fdt(struct spl_image_info *spl_image, - */ - image_info.load_addr = spl_image->load_addr + spl_image->size; - -+ /* -+ * Since libfdt v1.6.1, the device tree must be loaded in to memory -+ * at an 8-byte aligned address. -+ */ -+ image_info.load_addr = roundup(image_info.load_addr, 8); -+ - /* Figure out which device tree the board wants to use */ - node = spl_fit_get_image_node(ctx, FIT_FDT_PROP, index++); - if (node < 0) { --- -2.34.1 - diff --git a/board/andes/ae350/patches/uboot/uboot.hash b/board/andes/ae350/patches/uboot/uboot.hash new file mode 100644 index 00000000000..440526977bd --- /dev/null +++ b/board/andes/ae350/patches/uboot/uboot.hash @@ -0,0 +1,2 @@ +# Locally calculated +sha256 0f933f6c5a426895bf306e93e6ac53c60870e4b54cda56d95211bec99e63bec7 u-boot-2025.07.tar.bz2 diff --git a/board/andes/ae350/post-build.sh b/board/andes/ae350/post-build.sh index 84187a064bc..e1669c2bcd2 100755 --- a/board/andes/ae350/post-build.sh +++ b/board/andes/ae350/post-build.sh @@ -1,3 +1,3 @@ #!/bin/sh -cp $BINARIES_DIR/Image $TARGET_DIR/boot -cp $BINARIES_DIR/ae350_ax45mp.dtb $TARGET_DIR/boot +cp "$BINARIES_DIR"/Image "$TARGET_DIR"/boot +cp "$BINARIES_DIR"/ae350_ax45mp.dtb "$TARGET_DIR"/boot diff --git a/board/acmesystems/aria-g25/patches/linux-headers/linux-headers.hash b/board/arcturus/ppc-ucp1020/patches/linux-headers/linux-headers.hash similarity index 100% rename from board/acmesystems/aria-g25/patches/linux-headers/linux-headers.hash rename to board/arcturus/ppc-ucp1020/patches/linux-headers/linux-headers.hash diff --git a/board/arcturus/ppc-ucp1020/patches/linux/linux.hash b/board/arcturus/ppc-ucp1020/patches/linux/linux.hash new file mode 100644 index 00000000000..eafb86d8cb1 --- /dev/null +++ b/board/arcturus/ppc-ucp1020/patches/linux/linux.hash @@ -0,0 +1,2 @@ +# Locally calculated +sha256 5ad0192e5cd10eca5f9fabb3234f2bfcbafba3382a9577139cc66be629e5bafa linux-v20190618.tar.gz diff --git a/board/arcturus/ppc-ucp1020/patches/uboot/uboot.hash b/board/arcturus/ppc-ucp1020/patches/uboot/uboot.hash new file mode 100644 index 00000000000..eb9744043cd --- /dev/null +++ b/board/arcturus/ppc-ucp1020/patches/uboot/uboot.hash @@ -0,0 +1,2 @@ +# Locally calculated +sha256 eba8aaf634affec7c27a55b899c404a85a0c219c3f814d576793e3c21b711b05 uboot-v20190618.tar.gz diff --git a/board/arm/fvp-ebbr/fvp-config.txt b/board/arm/fvp-ebbr/fvp-config.txt index 61e040015bc..5c68bb638e1 100644 --- a/board/arm/fvp-ebbr/fvp-config.txt +++ b/board/arm/fvp-ebbr/fvp-config.txt @@ -1,6 +1,10 @@ # Arm A-Profile Base RevC AEM FVP config bp.secure_memory=1 +bp.terminal_1.start_telnet=0 bp.ve_sysregs.exit_on_shutdown=1 +bp.virtio_net.enabled=1 +bp.virtio_net.hostbridge.userNetworking=1 +bp.vis.rate_limit-enable=1 cache_state_modelled=0 cluster0.NUM_CORES=4 cluster0.cpu0.enable_crc32=1 diff --git a/board/arm/fvp-ebbr/patches/arm-trusted-firmware/arm-trusted-firmware.hash b/board/arm/fvp-ebbr/patches/arm-trusted-firmware/arm-trusted-firmware.hash index 8b77e1f1653..b52b00722fd 100644 --- a/board/arm/fvp-ebbr/patches/arm-trusted-firmware/arm-trusted-firmware.hash +++ b/board/arm/fvp-ebbr/patches/arm-trusted-firmware/arm-trusted-firmware.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 c0f23ccc71c49989e9ad238acf334473c17b7c88f79a20c829c3d443e3794a22 arm-trusted-firmware-v2.11-git4.tar.gz +sha256 a899100d9d92ceb1290fd4d61f5dd3b8af6b0e937cebc3c711cb514ac5acfaed arm-trusted-firmware-v2.14.0-git4.tar.gz diff --git a/board/arm/fvp-ebbr/patches/linux/linux.hash b/board/arm/fvp-ebbr/patches/linux/linux.hash index 20941a269b9..a4cc7bd3f6f 100644 --- a/board/arm/fvp-ebbr/patches/linux/linux.hash +++ b/board/arm/fvp-ebbr/patches/linux/linux.hash @@ -1,2 +1,2 @@ -# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc -sha256 524858852f5869a9ef17de8b1e6e7faf05bcb2c462bc96b3c24dbf82ede373cf linux-6.10.12.tar.xz +# From https://cdn.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc +sha256 9106a4605da9e31ff17659d958782b815f9591ab308d03b0ee21aad6c7dced4b linux-6.18.tar.xz diff --git a/board/arm/fvp-ebbr/patches/optee-client/optee-client.hash b/board/arm/fvp-ebbr/patches/optee-client/optee-client.hash new file mode 100644 index 00000000000..6c61615dbe6 --- /dev/null +++ b/board/arm/fvp-ebbr/patches/optee-client/optee-client.hash @@ -0,0 +1,2 @@ +# Locally calculated +sha256 464b3bf5bc4a61830357dbf81a0e5b89414d3bca1c2a752570cb0e40d2f1e637 optee-client-4.8.0.tar.gz diff --git a/board/arm/fvp-ebbr/patches/optee-os/0001-plat-vexpress-redirect-console-to-uart0.patch b/board/arm/fvp-ebbr/patches/optee-os/0001-plat-vexpress-redirect-console-to-uart0.patch new file mode 100644 index 00000000000..aa61594088c --- /dev/null +++ b/board/arm/fvp-ebbr/patches/optee-os/0001-plat-vexpress-redirect-console-to-uart0.patch @@ -0,0 +1,34 @@ +From 1debd0c8bd46255f8c22b128ec16586ef9154869 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Vincent=20Stehl=C3=A9?= +Date: Tue, 2 Dec 2025 15:53:23 +0100 +Subject: [PATCH] plat-vexpress: redirect console to uart0 +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +For consistency with TF-A, U-Boot and Linux. + +Upstream: Not applicable. Buildroot specific. +Signed-off-by: Vincent Stehlé +--- + core/arch/arm/plat-vexpress/platform_config.h | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +diff --git a/core/arch/arm/plat-vexpress/platform_config.h b/core/arch/arm/plat-vexpress/platform_config.h +index 9231f3048..76c7fdb36 100644 +--- a/core/arch/arm/plat-vexpress/platform_config.h ++++ b/core/arch/arm/plat-vexpress/platform_config.h +@@ -23,8 +23,8 @@ + + #define IT_UART1 38 + +-#define CONSOLE_UART_BASE UART1_BASE +-#define IT_CONSOLE_UART IT_UART1 ++#define CONSOLE_UART_BASE UART0_BASE ++#undef IT_CONSOLE_UART + + #elif defined(PLATFORM_FLAVOR_juno) + +-- +2.51.0 + diff --git a/board/arm/fvp-ebbr/patches/optee-os/optee-os.hash b/board/arm/fvp-ebbr/patches/optee-os/optee-os.hash new file mode 100644 index 00000000000..80b30de9ead --- /dev/null +++ b/board/arm/fvp-ebbr/patches/optee-os/optee-os.hash @@ -0,0 +1,2 @@ +# Locally calculated +sha256 5222cd553f5edb69ae4ec7cb99b2bfec2c47a47c0be1865b49744701918e8b4d optee-os-4.8.0.tar.gz diff --git a/board/arm/fvp-ebbr/patches/uboot/uboot.hash b/board/arm/fvp-ebbr/patches/uboot/uboot.hash index fe9b4f53dc6..98a5c53aaf9 100644 --- a/board/arm/fvp-ebbr/patches/uboot/uboot.hash +++ b/board/arm/fvp-ebbr/patches/uboot/uboot.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 f591da9ab90ef3d6b3d173766d0ddff90c4ed7330680897486117df390d83c8f u-boot-2024.07.tar.bz2 +sha256 b4f032848e56cc8f213ad59f9132c084dbbb632bc29176d024e58220e0efdf4a u-boot-2025.10.tar.bz2 diff --git a/board/arm/fvp-ebbr/readme.txt b/board/arm/fvp-ebbr/readme.txt index fe7d4de5c55..6edfed20dfb 100644 --- a/board/arm/fvp-ebbr/readme.txt +++ b/board/arm/fvp-ebbr/readme.txt @@ -2,7 +2,7 @@ Introduction ============ The arm_fvp_ebbr_defconfig is meant to illustrate some aspects of the Arm EBBR -specification[1] and the Arm SystemReady IR[2] compliance program. +specification[1] and the Arm SystemReady Devicetree band[2]. It allows building an AArch64 U-Boot based firmware implementing the subset of UEFI defined by EBBR, as well as a Linux OS disk image booting with UEFI, to run on the Arm A-Profile Base RevC AEM FVP. @@ -26,8 +26,8 @@ Running on the FVP Download the FVP from one of the following sources, corresponding to your host computer: -- https://developer.arm.com/-/cdn-downloads/permalink/Fixed-Virtual-Platforms/FM-11.27/FVP_Base_RevC-2xAEMvA_11.27_19_Linux64.tgz -- https://developer.arm.com/-/cdn-downloads/permalink/Fixed-Virtual-Platforms/FM-11.27/FVP_Base_RevC-2xAEMvA_11.27_19_Linux64_armv8l.tgz +- https://developer.arm.com/-/cdn-downloads/permalink/FVPs-Architecture/FM-11.30/FVP_Base_RevC-2xAEMvA_11.30_27_Linux64.tgz +- https://developer.arm.com/-/cdn-downloads/permalink/FVPs-Architecture/FM-11.30/FVP_Base_RevC-2xAEMvA_11.30_27_Linux64_armv8l.tgz The FVP will be located under one of the corresponding folders: @@ -53,21 +53,58 @@ supporting the EBBR specification. To run another OS on simulation using a live or pre-installed image, use the same FVP command line as for the generated OS but adapt the OS image path in the virtioblockdevice stanza. -The image generated by the aarch64_efi_defconfig or the Arm ACS-IR images[3] are -examples of pre-installed OS images. -Linux distributions such as Debian, Fedora, openSUSE or Ubuntu provide a -pre-installed OS image. +The image generated by the aarch64_efi_defconfig or the Arm ACS Devicetree +images[3] are examples of pre-installed OS images. +Linux distributions such as Debian, Fedora, openSUSE or Ubuntu, or FreeBSD +provide live or pre-installed OS image. + +Firmware details +================ + +Noteworthy firmware features: + +- TF-A, OP-TEE & U-Boot +- UEFI, with EFI variables stored on disk in the ESP +- Support for ethernet, RTC and LCD + +Architecture diagram: + + Non-Secure : Secure + : + +---------------------------+ : + EL0 | Busybox | : + +---------------------------+ : +--------+ + EL1 | Linux | : | OP-TEE | S-EL1 + +---------------------------+ : +--------+ + EL2 | U-Boot, GRUB, Linux (kvm) | : + +---------------------------+ : + ...................................: + +----------------------------------------+ + | TF-A | EL3 + +----------------------------------------+ + +Boot flow: + + TF-A -+-> OP-TEE + `-> U-Boot -> GRUB -> Linux -> Busybox + +TF-A BL1 loads the fit image with the remaining pieces of TF-A, OP-TEE and +U-Boot. +OP-TEE boots, calls back TF-A to go to normal world. +U-Boot loads GRUB with UEFI, boots Linux at EL2. + +In this configuration, the Devicetree is static and fully contained in TF-A. Miscellaneous ============= This configuration is inspired by the arm_foundationv8_defconfig, the -qemu_aarch64_virt_defconfig and the Arm SystemReady IR IoT Integration, Test, -and Certification Guide[4]. +qemu_aarch64_virt_defconfig and the Arm SystemReady Devicetree Band Integration +and Testing Guide[4]. -Firmware update, MMC and network are currently not supported. +Firmware update, GOP, MMC and RNG are currently not supported. -[1]: https://github.com/ARM-software/ebbr -[2]: https://developer.arm.com/Architectures/Arm%20SystemReady%20IR -[3]: https://github.com/ARM-software/arm-systemready/tree/main/IR/prebuilt_images -[4]: https://developer.arm.com/documentation/DUI1101/latest/ +[1] https://github.com/ARM-software/ebbr +[2] https://www.arm.com/architecture/system-architectures/systemready-compliance-program/systemready-devicetree-band +[3] https://github.com/ARM-software/arm-systemready/tree/main/SystemReady-devicetree-band/prebuilt_images +[4] https://developer.arm.com/documentation/DUI1101/latest/ diff --git a/board/arm/fvp-ebbr/u-boot.fragment b/board/arm/fvp-ebbr/u-boot.fragment index abbf8395be4..37d98bcdf0e 100644 --- a/board/arm/fvp-ebbr/u-boot.fragment +++ b/board/arm/fvp-ebbr/u-boot.fragment @@ -1,4 +1,4 @@ -# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_ARM_SMCCC_FEATURES=y CONFIG_BOOTCOMMAND="bootflow scan -lb" CONFIG_BOOTMETH_DISTRO=y CONFIG_BOOTM_EFI=y @@ -17,8 +17,10 @@ CONFIG_CMD_EFI_VARIABLE_FILE_STORE=y CONFIG_CMD_GETTIME=y CONFIG_CMD_GPT=y CONFIG_CMD_NVEDIT_EFI=y +CONFIG_CMD_POWEROFF=y CONFIG_CMD_RNG=y CONFIG_CMD_RTC=y +CONFIG_CMD_SMC=y CONFIG_CMD_TIME=y CONFIG_DM_RNG=y CONFIG_DM_RTC=y @@ -29,6 +31,7 @@ CONFIG_EFI_LOADER=y CONFIG_EFI_LOADER_HII=y CONFIG_EFI_MM_COMM_TEE=y CONFIG_EFI_PARTITION=y +CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y CONFIG_EFI_SECURE_BOOT=y CONFIG_EFI_SET_TIME=y CONFIG_EFI_UNICODE_CAPITALIZATION=y diff --git a/board/aspeed/ast2500-evb/genimage.cfg b/board/aspeed/ast2500-evb/genimage.cfg index 498a71e4d75..952a7b78200 100644 --- a/board/aspeed/ast2500-evb/genimage.cfg +++ b/board/aspeed/ast2500-evb/genimage.cfg @@ -30,11 +30,11 @@ image flash.img { partition fitimage { image = "image.itb" offset = 512K - size = 4352K + size = 7000K } partition spare { - offset = 4864K - size = 27904K + offset = 7512K + size = 25256K } } diff --git a/board/aspeed/ast2500-evb/patches/linux/linux.hash b/board/aspeed/ast2500-evb/patches/linux/linux.hash new file mode 100644 index 00000000000..e1da9b309e7 --- /dev/null +++ b/board/aspeed/ast2500-evb/patches/linux/linux.hash @@ -0,0 +1,2 @@ +# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc +sha256 5be3daa1f9427b1bdb34c4894d9c1adfac38cff674376fe0611a3065729a1a81 linux-6.16.7.tar.xz diff --git a/board/aspeed/ast2500-evb/patches/uboot/uboot.hash b/board/aspeed/ast2500-evb/patches/uboot/uboot.hash new file mode 100644 index 00000000000..440526977bd --- /dev/null +++ b/board/aspeed/ast2500-evb/patches/uboot/uboot.hash @@ -0,0 +1,2 @@ +# Locally calculated +sha256 0f933f6c5a426895bf306e93e6ac53c60870e4b54cda56d95211bec99e63bec7 u-boot-2025.07.tar.bz2 diff --git a/board/aspeed/ast2600-evb/patches/linux/linux.hash b/board/aspeed/ast2600-evb/patches/linux/linux.hash new file mode 100644 index 00000000000..e1da9b309e7 --- /dev/null +++ b/board/aspeed/ast2600-evb/patches/linux/linux.hash @@ -0,0 +1,2 @@ +# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc +sha256 5be3daa1f9427b1bdb34c4894d9c1adfac38cff674376fe0611a3065729a1a81 linux-6.16.7.tar.xz diff --git a/board/aspeed/ast2600-evb/patches/uboot/uboot.hash b/board/aspeed/ast2600-evb/patches/uboot/uboot.hash new file mode 100644 index 00000000000..de387741d20 --- /dev/null +++ b/board/aspeed/ast2600-evb/patches/uboot/uboot.hash @@ -0,0 +1,2 @@ +# Locally calculated +sha256 16da36d1832f058cf1a6673b6a2eedeef1260576c15e76c4998e30d0fb13d339 uboot-66672e5af36fe294df56f8e7942069e3909f3790-git4.tar.gz diff --git a/board/aspeed/common/post-image.sh b/board/aspeed/common/post-image.sh index ea65a49afff..8c953e038c9 100755 --- a/board/aspeed/common/post-image.sh +++ b/board/aspeed/common/post-image.sh @@ -3,8 +3,8 @@ BOARD_DIR="$(dirname $0)" mkimage=$HOST_DIR/bin/mkimage -BOARD_DT=$(sed -n \ - 's/^BR2_LINUX_KERNEL_INTREE_DTS_NAME="\([a-z0-9\-]*\).*"$/\1/p' \ +BOARD_DT=$(sed -nr \ + -e 's|^BR2_LINUX_KERNEL_INTREE_DTS_NAME="(aspeed/)?([a-z0-9\-]*).*"$|\2|p' \ ${BR2_CONFIG}) sed -e "s/%BOARD_DTB%/${BOARD_DT}.dtb/" \ diff --git a/board/acmesystems/arietta-g25/patches/linux-headers/linux-headers.hash b/board/asus/tinker/patches/linux-headers/linux-headers.hash similarity index 100% rename from board/acmesystems/arietta-g25/patches/linux-headers/linux-headers.hash rename to board/asus/tinker/patches/linux-headers/linux-headers.hash diff --git a/board/asus/tinker/patches/linux/linux.hash b/board/asus/tinker/patches/linux/linux.hash new file mode 100644 index 00000000000..f83883b936d --- /dev/null +++ b/board/asus/tinker/patches/linux/linux.hash @@ -0,0 +1,2 @@ +# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc +sha256 37f0c5d5c242c1d604e87d48f08795e861a5a85f725b4ca11d0a538f12ff8cff linux-6.18.8.tar.xz diff --git a/board/asus/tinker/patches/uboot/uboot.hash b/board/asus/tinker/patches/uboot/uboot.hash new file mode 100644 index 00000000000..60971ee74f0 --- /dev/null +++ b/board/asus/tinker/patches/uboot/uboot.hash @@ -0,0 +1,2 @@ +# Locally computed +sha256 b60d5865cefdbc75da8da4156c56c458e00de75a49b80c1a2e58a96e30ad0d54 u-boot-2026.01.tar.bz2 diff --git a/board/avnet/s6lx9_microboard/lx9_mmu.dts b/board/avnet/s6lx9_microboard/lx9_mmu.dts deleted file mode 100644 index 8ffedd9febc..00000000000 --- a/board/avnet/s6lx9_microboard/lx9_mmu.dts +++ /dev/null @@ -1,247 +0,0 @@ -/* - * Device Tree Generator version: 1.3 - * - * (C) Copyright 2007-2008 Xilinx, Inc. - * (C) Copyright 2007-2009 Michal Simek - * - * Michal SIMEK - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - * CAUTION: This file is automatically generated by libgen. - * Version: Xilinx EDK 13.2 EDK_O.61xd - * - * XPS project directory: device-tree_bsp_230-orig - */ - -/dts-v1/; -/ { - #address-cells = <1>; - #size-cells = <1>; - compatible = "xlnx,microblaze"; - model = "testing"; - MCB3_LPDDR: memory@80000000 { - device_type = "memory"; - reg = < 0x80000000 0x4000000 >; - } ; - aliases { - ethernet0 = &Ethernet_MAC; - serial0 = &USB_Uart; - } ; - chosen { - bootargs = "console=ttyUL0"; - linux,stdout-path = "/axi@0/serial@40600000"; - } ; - cpus { - #address-cells = <1>; - #cpus = <0x1>; - #size-cells = <0>; - microblaze_0: cpu@0 { - clock-frequency = <66666667>; - compatible = "xlnx,microblaze-8.20.a"; - d-cache-baseaddr = <0x80000000>; - d-cache-highaddr = <0x83ffffff>; - d-cache-line-size = <0x10>; - d-cache-size = <0x2000>; - device_type = "cpu"; - i-cache-baseaddr = <0x80000000>; - i-cache-highaddr = <0x83ffffff>; - i-cache-line-size = <0x10>; - i-cache-size = <0x2000>; - model = "microblaze,8.20.a"; - reg = <0>; - timebase-frequency = <66666667>; - xlnx,addr-tag-bits = <0xd>; - xlnx,allow-dcache-wr = <0x1>; - xlnx,allow-icache-wr = <0x1>; - xlnx,area-optimized = <0x0>; - xlnx,avoid-primitives = <0x0>; - xlnx,branch-target-cache-size = <0x0>; - xlnx,cache-byte-size = <0x2000>; - xlnx,d-axi = <0x1>; - xlnx,d-lmb = <0x1>; - xlnx,d-plb = <0x0>; - xlnx,data-size = <0x20>; - xlnx,dcache-addr-tag = <0xd>; - xlnx,dcache-always-used = <0x1>; - xlnx,dcache-byte-size = <0x2000>; - xlnx,dcache-data-width = <0x0>; - xlnx,dcache-force-tag-lutram = <0x0>; - xlnx,dcache-interface = <0x0>; - xlnx,dcache-line-len = <0x4>; - xlnx,dcache-use-fsl = <0x0>; - xlnx,dcache-use-writeback = <0x0>; - xlnx,dcache-victims = <0x0>; - xlnx,debug-enabled = <0x1>; - xlnx,div-zero-exception = <0x0>; - xlnx,dynamic-bus-sizing = <0x1>; - xlnx,ecc-use-ce-exception = <0x0>; - xlnx,edge-is-positive = <0x1>; - xlnx,endianness = <0x1>; - xlnx,family = "spartan6"; - xlnx,fault-tolerant = <0x0>; - xlnx,fpu-exception = <0x0>; - xlnx,freq = <0x3f940ab>; - xlnx,fsl-data-size = <0x20>; - xlnx,fsl-exception = <0x0>; - xlnx,fsl-links = <0x0>; - xlnx,i-axi = <0x0>; - xlnx,i-lmb = <0x1>; - xlnx,i-plb = <0x0>; - xlnx,icache-always-used = <0x1>; - xlnx,icache-data-width = <0x0>; - xlnx,icache-force-tag-lutram = <0x0>; - xlnx,icache-interface = <0x0>; - xlnx,icache-line-len = <0x4>; - xlnx,icache-streams = <0x0>; - xlnx,icache-use-fsl = <0x0>; - xlnx,icache-victims = <0x0>; - xlnx,ill-opcode-exception = <0x0>; - xlnx,instance = "microblaze_0"; - xlnx,interconnect = <0x2>; - xlnx,interconnect-m-axi-dc-aw-register = <0x0>; - xlnx,interconnect-m-axi-dc-read-issuing = <0x2>; - xlnx,interconnect-m-axi-dc-w-register = <0x0>; - xlnx,interconnect-m-axi-dc-write-issuing = <0x20>; - xlnx,interconnect-m-axi-dp-read-issuing = <0x1>; - xlnx,interconnect-m-axi-dp-write-issuing = <0x1>; - xlnx,interconnect-m-axi-ic-read-issuing = <0x2>; - xlnx,interconnect-m-axi-ip-read-issuing = <0x1>; - xlnx,interrupt-is-edge = <0x0>; - xlnx,lockstep-slave = <0x0>; - xlnx,mmu-dtlb-size = <0x1>; - xlnx,mmu-itlb-size = <0x1>; - xlnx,mmu-privileged-instr = <0x0>; - xlnx,mmu-tlb-access = <0x3>; - xlnx,mmu-zones = <0x2>; - xlnx,number-of-pc-brk = <0x1>; - xlnx,number-of-rd-addr-brk = <0x0>; - xlnx,number-of-wr-addr-brk = <0x0>; - xlnx,opcode-0x0-illegal = <0x0>; - xlnx,optimization = <0x0>; - xlnx,pvr = <0x0>; - xlnx,pvr-user1 = <0x0>; - xlnx,pvr-user2 = <0x0>; - xlnx,reset-msr = <0x0>; - xlnx,sco = <0x0>; - xlnx,stream-interconnect = <0x0>; - xlnx,unaligned-exceptions = <0x0>; - xlnx,use-barrel = <0x1>; - xlnx,use-branch-target-cache = <0x0>; - xlnx,use-dcache = <0x1>; - xlnx,use-div = <0x0>; - xlnx,use-ext-brk = <0x1>; - xlnx,use-ext-nm-brk = <0x1>; - xlnx,use-extended-fsl-instr = <0x0>; - xlnx,use-fpu = <0x0>; - xlnx,use-hw-mul = <0x1>; - xlnx,use-icache = <0x1>; - xlnx,use-interrupt = <0x1>; - xlnx,use-mmu = <0x3>; - xlnx,use-msr-instr = <0x1>; - xlnx,use-pcmp-instr = <0x0>; - xlnx,use-stack-protection = <0x0>; - } ; - } ; - axi4lite_0: axi@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "xlnx,axi-interconnect-1.03.a", "simple-bus"; - ranges ; - Ethernet_MAC: ethernet@40e00000 { - compatible = "xlnx,axi-ethernetlite-1.00.a", "xlnx,xps-ethernetlite-1.00.a"; - device_type = "network"; - interrupt-parent = <µblaze_0_intc>; - interrupts = < 2 0 >; - local-mac-address = [ 00 0a 35 aa de 00 ]; -// phy-handle = <&phy0>; - reg = < 0x40e00000 0x10000 >; - xlnx,duplex = <0x1>; - xlnx,family = "spartan6"; - xlnx,include-global-buffers = <0x0>; - xlnx,include-internal-loopback = <0x0>; - xlnx,include-mdio = <0x1>; - xlnx,include-phy-constraints = <0x1>; - xlnx,interconnect-s-axi-read-acceptance = <0x1>; - xlnx,interconnect-s-axi-write-acceptance = <0x1>; - xlnx,rx-ping-pong = <0x0>; - xlnx,s-axi-aclk-period-ps = <0x3a98>; - xlnx,s-axi-id-width = <0x1>; - xlnx,s-axi-supports-narrow-burst = <0x0>; - xlnx,tx-ping-pong = <0x0>; -/* - mdio { - #address-cells = <1>; - #size-cells = <0>; - phy0: phy@7 { - compatible = "marvell,88e1111"; - device_type = "ethernet-phy"; - reg = <7>; - } ; - } ; -*/ - } ; - SPI_FLASH: spi@40a00000 { - compatible = "xlnx,axi-spi-1.01.a", "xlnx,xps-spi-2.00.a"; - interrupt-parent = <µblaze_0_intc>; - interrupts = < 1 2 >; - reg = < 0x40a00000 0x10000 >; - xlnx,family = "spartan6"; - xlnx,fifo-exist = <0x1>; - xlnx,num-ss-bits = <0x1>; - xlnx,num-transfer-bits = <0x8>; - xlnx,sck-ratio = <0x4>; - } ; - USB_Uart: serial@40600000 { - clock-frequency = <66666667>; - compatible = "xlnx,axi-uartlite-1.02.a", "xlnx,xps-uartlite-1.00.a"; - current-speed = <115200>; - device_type = "serial"; - interrupt-parent = <µblaze_0_intc>; - interrupts = < 3 0 >; - port-number = <0>; - reg = < 0x40600000 0x10000 >; - xlnx,baudrate = <0x1c200>; - xlnx,data-bits = <0x8>; - xlnx,family = "spartan6"; - xlnx,odd-parity = <0x1>; - xlnx,s-axi-aclk-freq-hz = <0x3f940ab>; - xlnx,use-parity = <0x0>; - } ; - microblaze_0_intc: interrupt-controller@41200000 { - #interrupt-cells = <0x2>; - compatible = "xlnx,axi-intc-1.01.a", "xlnx,xps-intc-1.00.a"; - interrupt-controller ; - reg = < 0x41200000 0x10000 >; - xlnx,kind-of-intr = <0xc>; - xlnx,num-intr-inputs = <0x4>; - } ; - system_timer: timer@41c00000 { - clock-frequency = <66666667>; - compatible = "xlnx,axi-timer-1.02.a", "xlnx,xps-timer-1.00.a"; - interrupt-parent = <µblaze_0_intc>; - interrupts = < 0 2 >; - reg = < 0x41c00000 0x10000 >; - xlnx,count-width = <0x20>; - xlnx,family = "spartan6"; - xlnx,gen0-assert = <0x1>; - xlnx,gen1-assert = <0x1>; - xlnx,one-timer-only = <0x0>; - xlnx,trig0-assert = <0x1>; - xlnx,trig1-assert = <0x1>; - } ; - } ; -} ; diff --git a/board/avnet/s6lx9_microboard/lx9_mmu_defconfig b/board/avnet/s6lx9_microboard/lx9_mmu_defconfig deleted file mode 100644 index 5d01ca00a19..00000000000 --- a/board/avnet/s6lx9_microboard/lx9_mmu_defconfig +++ /dev/null @@ -1,68 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="rootfs.cpio" -CONFIG_INITRAMFS_COMPRESSION_GZIP=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_EXPERT=y -CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_EXTRA_PASS=y -# CONFIG_HOTPLUG is not set -# CONFIG_BASE_FULL is not set -# CONFIG_FUTEX is not set -# CONFIG_EPOLL is not set -# CONFIG_SIGNALFD is not set -# CONFIG_SHMEM is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_OPT_LIB_ASM is not set -CONFIG_KERNEL_BASE_ADDR=0x80000000 -CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan6" -CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1 -# CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR is not set -CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1 -CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1 -CONFIG_XILINX_MICROBLAZE0_HW_VER="8.20.a" -CONFIG_HZ_100=y -CONFIG_MMU=y -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE_FORCE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_PROC_DEVICETREE=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_XILINX_EMACLITE=y -# CONFIG_INPUT is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -CONFIG_SERIAL_UARTLITE=y -CONFIG_SERIAL_UARTLITE_CONSOLE=y -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_USB_SUPPORT is not set -CONFIG_EXT2_FS=y -# CONFIG_DNOTIFY is not set -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_CIFS=y -CONFIG_CIFS_STATS=y -CONFIG_CIFS_STATS2=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DETECT_HUNG_TASK=y -CONFIG_DEBUG_SLAB=y -CONFIG_DEBUG_SPINLOCK=y -CONFIG_DEBUG_INFO=y -CONFIG_EARLY_PRINTK=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/board/avnet/s6lx9_microboard/readme.txt b/board/avnet/s6lx9_microboard/readme.txt deleted file mode 100644 index 3cb2ce982ac..00000000000 --- a/board/avnet/s6lx9_microboard/readme.txt +++ /dev/null @@ -1,70 +0,0 @@ -This is the buildroot board support for the Avnet Spartan6 LX9 MicroBoard. - -The Avnet S6LX9 Microboard is a small USB-Stick sized module containing -a Spartan6 FPGA capable of running the Microblaze softcore processor -together with RAM and FLASH memory. - -The board can be bought from Avnet (avnet.com) or from Trenz Electronic -(www.trenz-electronic.de) for a low price. - -To run the Linux built with buildroot you have to install the FPGA bitfile -and u-boot as described in the tutorial AvtS6LX9MicroBoard_SW302_PetaLinux -available on http://www.em.avnet.com/s6microboard - -On this site also is a forum containing information on how to build your own -Microblaze processor for the Microboard. - -The image file (default name is simpleImage.lx9_mmu.ub) has to be copied -to your tftp folder (often /tftpboot/) or can be programmed into the -board's SPI flash. - -Sample session: - -$ make s6lx9_microboard_defconfig -$ make -$ cp build/linux-/arch/microblaze/boot/simpleImage.lx9_mmu.ub /tftpboot/br12.2a.ub -$ minicom - - - Icache:ON - Dcache:ON - U-Boot Start:0x83f00000 -SF: Got idcode 20 ba 18 10 01 -*** Warning - bad CRC, using default environment - -Net: Xilinx_Emaclite -MAC: 00:0a:35:00:63:37 -U-BOOT for Avnet-LX9-Microboard-AXI-tiny-13.1 - -BOOTP broadcast 1 -DHCP client bound to address 192.168.11.122 -Hit any key to stop autoboot: 0 -U-Boot-PetaLinux> tftp br12.2a.ub -Using Xilinx_Emaclite device -TFTP from server 192.168.11.10; our IP address is 192.168.11.122 -Filename 'br12.2a.ub'. -Load address: 0x80002000 -Loading: ################################################################# - ################################################################# - ################################################################# - ################################################################# - ################################################################# - ############################## -done -Bytes transferred = 5207724 (4f76ac hex) -U-Boot-PetaLinux> bootm -## Booting kernel from Legacy Image at 80002000 ... - Image Name: Linux-3.1.0 - Image Type: MicroBlaze Linux Kernel Image (uncompressed) - Data Size: 5207660 Bytes = 5 MB - Load Address: 80000000 - Entry Point: 80000000 - Verifying Checksum ... OK - Loading Kernel Image ... OK -OK -## Transferring control to Linux (at address 80000000), 0x80000000 ramdisk 0x00000000, FDT 0x00000000... -Early console on uartlite at 0x40600000 -..... boot log skipped - -Welcome to Microblaze Buildroot -Microblaze login: diff --git a/board/beagleboard/beagleboneai64/patches/linux-headers/linux-headers.hash b/board/bananapi/bananapi-m2-berry/patches/linux-headers/linux-headers.hash similarity index 100% rename from board/beagleboard/beagleboneai64/patches/linux-headers/linux-headers.hash rename to board/bananapi/bananapi-m2-berry/patches/linux-headers/linux-headers.hash diff --git a/board/bananapi/bananapi-m2-berry/patches/linux/linux.hash b/board/bananapi/bananapi-m2-berry/patches/linux/linux.hash new file mode 100644 index 00000000000..f83883b936d --- /dev/null +++ b/board/bananapi/bananapi-m2-berry/patches/linux/linux.hash @@ -0,0 +1,2 @@ +# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc +sha256 37f0c5d5c242c1d604e87d48f08795e861a5a85f725b4ca11d0a538f12ff8cff linux-6.18.8.tar.xz diff --git a/board/bananapi/bananapi-m2-berry/patches/uboot/uboot.hash b/board/bananapi/bananapi-m2-berry/patches/uboot/uboot.hash new file mode 100644 index 00000000000..b6a925ea4e8 --- /dev/null +++ b/board/bananapi/bananapi-m2-berry/patches/uboot/uboot.hash @@ -0,0 +1,2 @@ +# Locally calculated +sha256 b60d5865cefdbc75da8da4156c56c458e00de75a49b80c1a2e58a96e30ad0d54 u-boot-2026.01.tar.bz2 diff --git a/board/beagleboard/beagleplay/patches/linux-headers/linux-headers.hash b/board/bananapi/bananapi-m2-ultra/patches/linux-headers/linux-headers.hash similarity index 100% rename from board/beagleboard/beagleplay/patches/linux-headers/linux-headers.hash rename to board/bananapi/bananapi-m2-ultra/patches/linux-headers/linux-headers.hash diff --git a/board/bananapi/bananapi-m2-ultra/patches/linux/linux.hash b/board/bananapi/bananapi-m2-ultra/patches/linux/linux.hash new file mode 100644 index 00000000000..f83883b936d --- /dev/null +++ b/board/bananapi/bananapi-m2-ultra/patches/linux/linux.hash @@ -0,0 +1,2 @@ +# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc +sha256 37f0c5d5c242c1d604e87d48f08795e861a5a85f725b4ca11d0a538f12ff8cff linux-6.18.8.tar.xz diff --git a/board/bananapi/bananapi-m2-ultra/patches/uboot/uboot.hash b/board/bananapi/bananapi-m2-ultra/patches/uboot/uboot.hash new file mode 100644 index 00000000000..b6a925ea4e8 --- /dev/null +++ b/board/bananapi/bananapi-m2-ultra/patches/uboot/uboot.hash @@ -0,0 +1,2 @@ +# Locally calculated +sha256 b60d5865cefdbc75da8da4156c56c458e00de75a49b80c1a2e58a96e30ad0d54 u-boot-2026.01.tar.bz2 diff --git a/board/beagleboard/beaglebone/genimage.cfg b/board/beagleboard/beaglebone/genimage.cfg index 4b026fda843..095e6e200bd 100644 --- a/board/beagleboard/beaglebone/genimage.cfg +++ b/board/beagleboard/beaglebone/genimage.cfg @@ -12,6 +12,7 @@ image boot.vfat { "am335x-bonegreen.dtb", "am335x-boneblack-wireless.dtb", "am335x-bonegreen-wireless.dtb", + "am335x-bonegreen-eco.dtb", "extlinux" } } diff --git a/board/beagleboard/beaglebone/patches/linux/linux.hash b/board/beagleboard/beaglebone/patches/linux/linux.hash index f2c09d9872c..248ebc09ad2 100644 --- a/board/beagleboard/beaglebone/patches/linux/linux.hash +++ b/board/beagleboard/beaglebone/patches/linux/linux.hash @@ -1,2 +1,2 @@ -# Locally calculated -sha256 3654ca31003d90d20b195b23f8d60b78fcffbf0fd7fed6116c22719e20ac933d linux-6.12.23-ti-arm32-r11.tar.gz +# From https://cdn.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc +sha256 4633bbda2ab95eaf2a7af4041236451d6759c72e6946265531af4b3aacefbf89 linux-6.18.56.tar.xz diff --git a/board/beagleboard/beaglebone/patches/uboot/uboot.hash b/board/beagleboard/beaglebone/patches/uboot/uboot.hash index 440526977bd..66c72d3afd5 100644 --- a/board/beagleboard/beaglebone/patches/uboot/uboot.hash +++ b/board/beagleboard/beaglebone/patches/uboot/uboot.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 0f933f6c5a426895bf306e93e6ac53c60870e4b54cda56d95211bec99e63bec7 u-boot-2025.07.tar.bz2 +sha256 3f856da3cbbc93af51ff95fde18588a348b4a26723b01d9841e999d988481015 u-boot-2026.10.tar.bz2 diff --git a/board/beagleboard/beaglebone/post-build.sh b/board/beagleboard/beaglebone/post-build.sh index b7afd92ffea..dcb923356df 100755 --- a/board/beagleboard/beaglebone/post-build.sh +++ b/board/beagleboard/beaglebone/post-build.sh @@ -1,6 +1,8 @@ #!/bin/sh -BOARD_DIR="$(dirname $0)" +set -eu -cp $BOARD_DIR/uEnv.txt $BINARIES_DIR/uEnv.txt +BOARD_DIR="$(dirname "$0")" -install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf +cp "${BOARD_DIR}/uEnv.txt" "${BINARIES_DIR}/uEnv.txt" + +install -m 0644 -D "${BOARD_DIR}/extlinux.conf" "${BINARIES_DIR}/extlinux/extlinux.conf" diff --git a/board/beagleboard/beaglebone/readme.txt b/board/beagleboard/beaglebone/readme.txt index a11377eaee5..f896e1285ae 100644 --- a/board/beagleboard/beaglebone/readme.txt +++ b/board/beagleboard/beaglebone/readme.txt @@ -31,6 +31,7 @@ output/images/ +-- am335x-boneblack-wireless.dtb +-- am335x-boneblue.dtb +-- am335x-bonegreen.dtb ++-- am335x-bonegreen-eco.dtb +-- am335x-bonegreen-wireless.dtb +-- am335x-bone.dtb +-- am335x-evm.dtb diff --git a/board/beagleboard/beagleboneai/genimage.cfg b/board/beagleboard/beagleboneai/genimage.cfg index 8aefd76ef8b..02e61bc9bed 100644 --- a/board/beagleboard/beagleboneai/genimage.cfg +++ b/board/beagleboard/beagleboneai/genimage.cfg @@ -19,7 +19,7 @@ image sdcard.img { partition u-boot { partition-type = 0xC bootable = "true" - image = "boot.vfat" + image = "boot.vfat" } partition rootfs { diff --git a/board/beagleboard/beagleboneai/patches/linux/linux.hash b/board/beagleboard/beagleboneai/patches/linux/linux.hash index ec1a3601b7c..4ae61c9e4f2 100644 --- a/board/beagleboard/beagleboneai/patches/linux/linux.hash +++ b/board/beagleboard/beagleboneai/patches/linux/linux.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 c52bc1ffc396c11bce335c9ee5cd55fe4213cbc1fb4026ff62bb90c864c61f62 linux-5.10.217.tar.xz +sha256 c435bd74d1c21fc5a950781a50d78bae2b93944144694843359948ad3afc72a5 linux-6.12.50.tar.xz diff --git a/board/beagleboard/beagleboneai/patches/uboot/0001-am57xx-board.c-assume-on-failure-its-a-BBONE-AI.patch b/board/beagleboard/beagleboneai/patches/uboot/0001-am57xx-board.c-assume-on-failure-its-a-BBONE-AI.patch new file mode 100644 index 00000000000..0f2975bfaa8 --- /dev/null +++ b/board/beagleboard/beagleboneai/patches/uboot/0001-am57xx-board.c-assume-on-failure-its-a-BBONE-AI.patch @@ -0,0 +1,31 @@ +From 0b161f8e89a411fe54059cf1d0ba61354ee1e8a2 Mon Sep 17 00:00:00 2001 +From: Robert Nelson +Date: Wed, 3 Aug 2022 11:28:10 -0500 +Subject: [PATCH] am57xx/board.c: assume on failure its a BBONE-AI + +Signed-off-by: Robert Nelson +Upstream: https://github.com/beagleboard/u-boot/commit/0b161f8e89a411fe54059cf1d0ba61354ee1e8a2 +Signed-off-by: Peter Korsgaard +--- + board/ti/am57xx/board.c | 4 +++- + 1 file changed, 3 insertions(+), 1 deletion(-) + +diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c +index cfc825e52a3..f369693f382 100644 +--- a/board/ti/am57xx/board.c ++++ b/board/ti/am57xx/board.c +@@ -529,8 +529,10 @@ void do_board_detect(void) + + rc = ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS, + CONFIG_EEPROM_CHIP_ADDRESS); +- if (rc) ++ if (rc) { + printf("ti_i2c_eeprom_init failed %d\n", rc); ++ ti_i2c_eeprom_am_set("BBONE-AI", "A"); ++ }; + + #ifdef CONFIG_SUPPORT_EMMC_BOOT + rc = board_bootmode_has_emmc(); +-- +2.39.5 + diff --git a/board/beagleboard/beagleboneai/patches/uboot/0001-am57xx_evm-fixes.patch b/board/beagleboard/beagleboneai/patches/uboot/0001-am57xx_evm-fixes.patch deleted file mode 100644 index 9c7b12be844..00000000000 --- a/board/beagleboard/beagleboneai/patches/uboot/0001-am57xx_evm-fixes.patch +++ /dev/null @@ -1,839 +0,0 @@ -From 702ea30b462ba06f4fbee3393f0e6c19531f1e5f Mon Sep 17 00:00:00 2001 -From: Robert Nelson -Date: Fri, 25 Jun 2021 11:33:25 -0500 -Subject: [PATCH] am57xx_evm-fixes - -Signed-off-by: Robert Nelson -[Patch from https://github.com/beagleboard/u-boot/commit/702ea30b462ba06f4fbee3393f0e6c19531f1e5f] -Signed-off-by: Peter Korsgaard ---- - arch/arm/mach-omap2/omap5/hw_data.c | 1 + - board/ti/am57xx/board.c | 167 +++++++++++- - configs/am57xx_evm_defconfig | 15 +- - include/configs/ti_armv7_common.h | 407 ++++++++++++++++++++++++++++ - include/configs/ti_omap5_common.h | 5 + - include/environment/ti/boot.h | 32 ++- - include/environment/ti/mmc.h | 49 +++- - 7 files changed, 651 insertions(+), 25 deletions(-) - -diff --git a/arch/arm/mach-omap2/omap5/hw_data.c b/arch/arm/mach-omap2/omap5/hw_data.c -index fa4e27063c..d5192b1671 100644 ---- a/arch/arm/mach-omap2/omap5/hw_data.c -+++ b/arch/arm/mach-omap2/omap5/hw_data.c -@@ -421,6 +421,7 @@ void enable_basic_clocks(void) - (*prcm)->cm_l4per_uart1_clkctrl, - (*prcm)->cm_l4per_uart3_clkctrl, - (*prcm)->cm_l4per_i2c1_clkctrl, -+ (*prcm)->cm_l4per_i2c4_clkctrl, - #ifdef CONFIG_DRIVER_TI_CPSW - (*prcm)->cm_gmac_gmac_clkctrl, - #endif -diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c -index 73063faee6..ad05c41f22 100644 ---- a/board/ti/am57xx/board.c -+++ b/board/ti/am57xx/board.c -@@ -41,6 +41,7 @@ - #include - #include - #include -+#include - - #include "../common/board_detect.h" - #include "mux_data.h" -@@ -528,8 +529,10 @@ void do_board_detect(void) - - rc = ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS, - CONFIG_EEPROM_CHIP_ADDRESS); -- if (rc) -+ if (rc) { - printf("ti_i2c_eeprom_init failed %d\n", rc); -+ ti_i2c_eeprom_am_set("BBONE-AI", "A"); -+ }; - - #ifdef CONFIG_SUPPORT_EMMC_BOOT - rc = board_bootmode_has_emmc(); -@@ -579,6 +582,164 @@ void do_board_detect(void) - "Board: %s REV %s\n", bname, board_ti_get_rev()); - } - -+struct am335x_cape_eeprom_id { -+ unsigned int header; -+ char eeprom_rev[2]; -+ char board_name[32]; -+ char version[4]; -+ char manufacture[16]; -+ char part_number[16]; -+ char number_of_pins[2]; -+ char serial_number[12]; -+ char pin_usage[140]; -+ char vdd_3v3exp[ 2]; -+ char vdd_5v[ 2]; -+ char sys_5v[2]; -+ char dc_supplied[2]; -+}; -+ -+#define CAPE_EEPROM_BUS_NUM 3 -+#define CAPE_EEPROM_ADDR0 0x54 -+#define CAPE_EEPROM_ADDR1 0x55 -+#define CAPE_EEPROM_ADDR2 0x56 -+#define CAPE_EEPROM_ADDR3 0x57 -+ -+#define CAPE_EEPROM_ADDR_LEN 0x10 -+ -+static int probe_cape_eeprom(struct am335x_cape_eeprom_id *cape_header) -+{ -+ int ret; -+ struct udevice *dev; -+ unsigned char addr; -+ /* /lib/firmware/BB-CAPE-DISP-CT4-00A0.dtbo */ -+ /* 14 + 16 + 1 + 4 + 5 = 40 */ -+ char hash_cape_overlay[40]; -+ char cape_overlay[26]; -+ char process_cape_part_number[16]; -+ char process_cape_version[4]; -+ char end_part_number; -+ char cape_overlay_pass_to_kernel[18]; -+ -+ strlcpy(cape_overlay_pass_to_kernel, "", 1); -+ -+ for ( addr = CAPE_EEPROM_ADDR0; addr <= CAPE_EEPROM_ADDR3; addr++ ) { -+ ret = i2c_get_chip_for_busnum(CAPE_EEPROM_BUS_NUM, addr, 1, &dev); -+ if (ret) { -+ printf("BeagleBone Cape EEPROM: no EEPROM at address: 0x%x\n", addr); -+ } else { -+ printf("BeagleBone Cape EEPROM: found EEPROM at address: 0x%x\n", addr); -+ -+ ret = i2c_set_chip_offset_len(dev, 2); -+ if (ret) { -+ printf("BeagleBone Cape EEPROM: i2c_set_chip_offset_len failure\n"); -+ } -+ -+ ret = dm_i2c_read(dev, 0, (uchar *)cape_header, sizeof(struct am335x_cape_eeprom_id)); -+ if (ret) { -+ printf("BeagleBone Cape EEPROM: Cannot read eeprom params\n"); -+ } -+ -+ if (cape_header->header == 0xEE3355AA) { -+ strlcpy(hash_cape_overlay, "/lib/firmware/", 14 + 1); -+ strlcpy(cape_overlay, "", 2); -+ strlcpy(cape_overlay_pass_to_kernel, "", 2); -+ strlcpy(process_cape_part_number, "...............", 16 + 1); -+ strlcpy(process_cape_version, "...", 4 + 1); -+ -+ strlcpy(process_cape_part_number, cape_header->part_number, 16 + 1); -+ printf("BeagleBone Cape EEPROM: debug part_number field:[%s]\n", process_cape_part_number); -+ -+ //FIXME: some capes end with '.' -+ if ( process_cape_part_number[15] == 0x2E ) { -+ puts("debug: fixup, extra . in eeprom field\n"); -+ process_cape_part_number[15] = 0x00; -+ if ( process_cape_part_number[14] == 0x2E ) { -+ process_cape_part_number[14] = 0x00; -+ } -+ } -+ -+ //Find ending 0x00 or 0xFF -+ puts("BeagleBone Cape EEPROM: debug part_number field HEX:["); -+ end_part_number=16; -+ for ( int i=0; i <= 16; i++ ) { -+ if (( process_cape_part_number[i] == 0x00 ) || ( process_cape_part_number[i] == 0xFF )) { -+ end_part_number=i; -+ i=17; -+ } else { -+ printf("%x", process_cape_part_number[i]); -+ } -+ } -+ puts("]\n"); -+ -+ strncat(cape_overlay_pass_to_kernel, process_cape_part_number, end_part_number); -+ strncat(cape_overlay_pass_to_kernel, ",", 1); -+ //printf("debug: %s\n", cape_overlay_pass_to_kernel); -+ -+ strncat(hash_cape_overlay, process_cape_part_number, end_part_number); -+ strncat(cape_overlay, process_cape_part_number, end_part_number); -+ //printf("debug: %s %s\n", hash_cape_overlay, cape_overlay); -+ -+ strncat(hash_cape_overlay, "-", 1); -+ strncat(cape_overlay, "-", 1); -+ //printf("debug: %s %s\n", hash_cape_overlay, cape_overlay); -+ -+ strlcpy(process_cape_version, cape_header->version, 4 + 1); -+ //printf("debug: version field:[%s]\n", process_cape_version); -+ -+ //Find invalid 0xFF -> 0x30 BBAI FAN Cape... -+ puts("BeagleBone Cape EEPROM: debug version field HEX:["); -+ for ( int i=0; i <= 3; i++ ) { -+ printf("%x", process_cape_version[i]); -+ if ( process_cape_version[i] == 0xFF ) { -+ process_cape_version[i] = 0x30; -+ } -+ } -+ puts("]\n"); -+ -+ strncat(hash_cape_overlay, process_cape_version, 4); -+ strncat(cape_overlay, process_cape_version, 4); -+ //printf("debug: %s %s\n", hash_cape_overlay, cape_overlay); -+ -+ strncat(hash_cape_overlay, ".dtbo", 5); -+ strncat(cape_overlay, ".dtbo", 5); -+ //printf("debug: %s %s\n", hash_cape_overlay, cape_overlay); -+ -+ printf("BeagleBone Cape EEPROM: 0x%x %s\n", addr, cape_overlay); -+ -+ switch(addr) { -+ case CAPE_EEPROM_ADDR0: -+ env_set("uboot_overlay_addr0", cape_overlay); -+ env_set("uboot_detected_capes_addr0", cape_overlay_pass_to_kernel); -+ break; -+ case CAPE_EEPROM_ADDR1: -+ env_set("uboot_overlay_addr1", cape_overlay); -+ env_set("uboot_detected_capes_addr1", cape_overlay_pass_to_kernel); -+ break; -+ case CAPE_EEPROM_ADDR2: -+ env_set("uboot_overlay_addr2", cape_overlay); -+ env_set("uboot_detected_capes_addr2", cape_overlay_pass_to_kernel); -+ break; -+ case CAPE_EEPROM_ADDR3: -+ env_set("uboot_overlay_addr3", cape_overlay); -+ env_set("uboot_detected_capes_addr3", cape_overlay_pass_to_kernel); -+ break; -+ } -+ env_set("uboot_detected_capes", "1"); -+ } else { -+ printf("BeagleBone Cape EEPROM: EEPROM contents not valid (or blank) on address: 0x%x\n", addr); -+ } -+ } -+ } -+ return 0; -+} -+ -+void do_cape_detect(void) -+{ -+ struct am335x_cape_eeprom_id cape_header; -+ -+ probe_cape_eeprom(&cape_header); -+} -+ - static void setup_board_eeprom_env(void) - { - char *name = "beagle_x15"; -@@ -782,8 +943,10 @@ int board_late_init(void) - /* Just probe the potentially supported cdce913 device */ - uclass_get_device(UCLASS_CLK, 0, &dev); - -- if (board_is_bbai()) -+ if (board_is_bbai()) { - env_set("console", "ttyS0,115200n8"); -+ do_cape_detect(); -+ } - - #if !defined(CONFIG_SPL_BUILD) - board_ti_set_ethaddr(2); -diff --git a/configs/am57xx_evm_defconfig b/configs/am57xx_evm_defconfig -index 4da4aaa1c7..ed5b8aec16 100644 ---- a/configs/am57xx_evm_defconfig -+++ b/configs/am57xx_evm_defconfig -@@ -10,16 +10,20 @@ CONFIG_SPL_TEXT_BASE=0x40300000 - CONFIG_OMAP54XX=y - CONFIG_TARGET_AM57XX_EVM=y - CONFIG_SPL=y --CONFIG_ENV_OFFSET_REDUND=0x280000 - CONFIG_SPL_SPI_FLASH_SUPPORT=y - CONFIG_SPL_SPI_SUPPORT=y - CONFIG_ARMV7_LPAE=y --CONFIG_DEFAULT_DEVICE_TREE="am572x-idk" -+CONFIG_DEFAULT_DEVICE_TREE="am57xx-beagle-x15-revc" - CONFIG_AHCI=y - CONFIG_DISTRO_DEFAULTS=y - CONFIG_SPL_LOAD_FIT=y - # CONFIG_USE_SPL_FIT_GENERATOR is not set - CONFIG_OF_BOARD_SETUP=y -+CONFIG_BOOTDELAY=1 -+CONFIG_AUTOBOOT_KEYED=y -+CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" -+CONFIG_AUTOBOOT_DELAY_STR="d" -+CONFIG_AUTOBOOT_STOP_STR=" " - CONFIG_USE_BOOTARGS=y - CONFIG_BOOTARGS="androidboot.serialno=${serial#} console=ttyS2,115200 androidboot.console=ttyS2 androidboot.hardware=beagle_x15board" - # CONFIG_USE_BOOTCOMMAND is not set -@@ -48,13 +52,12 @@ CONFIG_BOOTP_DNS2=y - CONFIG_CMD_AVB=y - CONFIG_OF_CONTROL=y - CONFIG_SPL_OF_CONTROL=y --CONFIG_OF_LIST="am57xx-beagle-x15 am57xx-beagle-x15-revb1 am57xx-beagle-x15-revc am5729-beagleboneai am572x-idk am571x-idk am574x-idk" -+CONFIG_OF_LIST="am57xx-beagle-x15 am57xx-beagle-x15-revb1 am57xx-beagle-x15-revc am5729-beagleboneai" - CONFIG_ENV_OVERWRITE=y --CONFIG_ENV_IS_IN_MMC=y --CONFIG_SYS_REDUNDAND_ENVIRONMENT=y -+# CONFIG_ENV_IS_IN_FAT is not set - CONFIG_SYS_RELOC_GD_ENV_ADDR=y --CONFIG_SYS_MMC_ENV_DEV=1 - CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y -+# CONFIG_SPL_ENV_IS_NOWHERE is not set - CONFIG_VERSION_VARIABLE=y - CONFIG_BOOTP_SEND_HOSTNAME=y - CONFIG_DM=y -diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h -index f13e9e5264..eabd03e27d 100644 ---- a/include/configs/ti_armv7_common.h -+++ b/include/configs/ti_armv7_common.h -@@ -92,6 +92,413 @@ - #define CONFIG_SYS_I2C - #endif - -+#define EEPROM_PROGRAMMING \ -+ "eeprom_dump=i2c dev 0; " \ -+ "i2c md 0x50 0x00.2 20; " \ -+ "\0" \ -+ "eeprom_blank=i2c dev 0; " \ -+ "i2c mw 0x50 0x00.2 ff; " \ -+ "i2c mw 0x50 0x01.2 ff; " \ -+ "i2c mw 0x50 0x02.2 ff; " \ -+ "i2c mw 0x50 0x03.2 ff; " \ -+ "i2c mw 0x50 0x04.2 ff; " \ -+ "i2c mw 0x50 0x05.2 ff; " \ -+ "i2c mw 0x50 0x06.2 ff; " \ -+ "i2c mw 0x50 0x07.2 ff; " \ -+ "i2c mw 0x50 0x08.2 ff; " \ -+ "i2c mw 0x50 0x09.2 ff; " \ -+ "i2c mw 0x50 0x0a.2 ff; " \ -+ "i2c mw 0x50 0x0b.2 ff; " \ -+ "i2c mw 0x50 0x0c.2 ff; " \ -+ "i2c mw 0x50 0x0d.2 ff; " \ -+ "i2c mw 0x50 0x0e.2 ff; " \ -+ "i2c mw 0x50 0x0f.2 ff; " \ -+ "i2c mw 0x50 0x10.2 ff; " \ -+ "i2c mw 0x50 0x11.2 ff; " \ -+ "i2c mw 0x50 0x12.2 ff; " \ -+ "i2c mw 0x50 0x13.2 ff; " \ -+ "i2c mw 0x50 0x14.2 ff; " \ -+ "i2c mw 0x50 0x15.2 ff; " \ -+ "i2c mw 0x50 0x16.2 ff; " \ -+ "i2c mw 0x50 0x17.2 ff; " \ -+ "i2c mw 0x50 0x18.2 ff; " \ -+ "i2c mw 0x50 0x19.2 ff; " \ -+ "i2c mw 0x50 0x1a.2 ff; " \ -+ "i2c mw 0x50 0x1b.2 ff; " \ -+ "i2c mw 0x50 0x1c.2 ff; " \ -+ "i2c mw 0x50 0x1d.2 ff; " \ -+ "i2c mw 0x50 0x1e.2 ff; " \ -+ "i2c mw 0x50 0x1f.2 ff; " \ -+ "i2c md 0x50 0x00.2 20; " \ -+ "\0" \ -+ "eeprom_x15_b1=i2c dev 0; " \ -+ "i2c mw 0x50 0x00.2 aa; " \ -+ "i2c mw 0x50 0x01.2 55; " \ -+ "i2c mw 0x50 0x02.2 33; " \ -+ "i2c mw 0x50 0x03.2 ee; " \ -+ "i2c mw 0x50 0x04.2 42; " \ -+ "i2c mw 0x50 0x05.2 42; " \ -+ "i2c mw 0x50 0x06.2 52; " \ -+ "i2c mw 0x50 0x07.2 44; " \ -+ "i2c mw 0x50 0x08.2 58; " \ -+ "i2c mw 0x50 0x09.2 31; " \ -+ "i2c mw 0x50 0x0a.2 35; " \ -+ "i2c mw 0x50 0x0b.2 5f; " \ -+ "i2c mw 0x50 0x0c.2 42; " \ -+ "i2c mw 0x50 0x0d.2 2e; " \ -+ "i2c mw 0x50 0x0e.2 31; " \ -+ "i2c mw 0x50 0x0f.2 30; " \ -+ "i2c mw 0x50 0x10.2 57; " \ -+ "i2c mw 0x50 0x11.2 57; " \ -+ "i2c mw 0x50 0x12.2 59; " \ -+ "i2c mw 0x50 0x13.2 59; " \ -+ "i2c mw 0x50 0x14.2 34; " \ -+ "i2c mw 0x50 0x15.2 50; " \ -+ "i2c mw 0x50 0x16.2 35; " \ -+ "i2c mw 0x50 0x17.2 35; " \ -+ "i2c mw 0x50 0x18.2 30; " \ -+ "i2c mw 0x50 0x19.2 30; " \ -+ "i2c mw 0x50 0x1a.2 30; " \ -+ "i2c mw 0x50 0x1b.2 30; " \ -+ "i2c mw 0x50 0x1c.2 ff; " \ -+ "i2c mw 0x50 0x1d.2 ff; " \ -+ "i2c mw 0x50 0x1e.2 ff; " \ -+ "i2c mw 0x50 0x1f.2 ff; " \ -+ "i2c md 0x50 0x00.2 20; " \ -+ "\0" \ -+ "eeprom_x15_c=i2c dev 0; " \ -+ "i2c mw 0x50 0x00.2 aa; " \ -+ "i2c mw 0x50 0x01.2 55; " \ -+ "i2c mw 0x50 0x02.2 33; " \ -+ "i2c mw 0x50 0x03.2 ee; " \ -+ "i2c mw 0x50 0x04.2 42; " \ -+ "i2c mw 0x50 0x05.2 42; " \ -+ "i2c mw 0x50 0x06.2 52; " \ -+ "i2c mw 0x50 0x07.2 44; " \ -+ "i2c mw 0x50 0x08.2 58; " \ -+ "i2c mw 0x50 0x09.2 31; " \ -+ "i2c mw 0x50 0x0a.2 35; " \ -+ "i2c mw 0x50 0x0b.2 5f; " \ -+ "i2c mw 0x50 0x0c.2 43; " \ -+ "i2c mw 0x50 0x0d.2 2e; " \ -+ "i2c mw 0x50 0x0e.2 30; " \ -+ "i2c mw 0x50 0x0f.2 30; " \ -+ "i2c mw 0x50 0x10.2 79; " \ -+ "i2c mw 0x50 0x11.2 79; " \ -+ "i2c mw 0x50 0x12.2 77; " \ -+ "i2c mw 0x50 0x13.2 77; " \ -+ "i2c mw 0x50 0x14.2 50; " \ -+ "i2c mw 0x50 0x15.2 58; " \ -+ "i2c mw 0x50 0x16.2 31; " \ -+ "i2c mw 0x50 0x17.2 35; " \ -+ "i2c mw 0x50 0x18.2 6e; " \ -+ "i2c mw 0x50 0x19.2 6e; " \ -+ "i2c mw 0x50 0x1a.2 6e; " \ -+ "i2c mw 0x50 0x1b.2 6e; " \ -+ "i2c mw 0x50 0x1c.2 ff; " \ -+ "i2c mw 0x50 0x1d.2 ff; " \ -+ "i2c mw 0x50 0x1e.2 ff; " \ -+ "i2c mw 0x50 0x1f.2 ff; " \ -+ "i2c md 0x50 0x00.2 20; " \ -+ "eeprom_bbai_a2=i2c dev 0; " \ -+ "i2c mw 0x50 0x00.2 aa; " \ -+ "i2c mw 0x50 0x01.2 55; " \ -+ "i2c mw 0x50 0x02.2 33; " \ -+ "i2c mw 0x50 0x03.2 ee; " \ -+ "i2c mw 0x50 0x04.2 42; " \ -+ "i2c mw 0x50 0x05.2 42; " \ -+ "i2c mw 0x50 0x06.2 4F; " \ -+ "i2c mw 0x50 0x07.2 4E; " \ -+ "i2c mw 0x50 0x08.2 45; " \ -+ "i2c mw 0x50 0x09.2 2D; " \ -+ "i2c mw 0x50 0x0a.2 41; " \ -+ "i2c mw 0x50 0x0b.2 49; " \ -+ "i2c mw 0x50 0x0c.2 30; " \ -+ "i2c mw 0x50 0x0d.2 30; " \ -+ "i2c mw 0x50 0x0e.2 41; " \ -+ "i2c mw 0x50 0x0f.2 32; " \ -+ "i2c mw 0x50 0x10.2 57; " \ -+ "i2c mw 0x50 0x11.2 57; " \ -+ "i2c mw 0x50 0x12.2 59; " \ -+ "i2c mw 0x50 0x13.2 59; " \ -+ "i2c mw 0x50 0x14.2 53; " \ -+ "i2c mw 0x50 0x15.2 42; " \ -+ "i2c mw 0x50 0x16.2 41; " \ -+ "i2c mw 0x50 0x17.2 49; " \ -+ "i2c mw 0x50 0x18.2 30; " \ -+ "i2c mw 0x50 0x19.2 30; " \ -+ "i2c mw 0x50 0x1a.2 30; " \ -+ "i2c mw 0x50 0x1b.2 30; " \ -+ "i2c mw 0x50 0x1c.2 30; " \ -+ "i2c mw 0x50 0x1d.2 30; " \ -+ "i2c mw 0x50 0x1e.2 ff; " \ -+ "i2c mw 0x50 0x1f.2 ff; " \ -+ "i2c md 0x50 0x00.2 20; " \ -+ "\0" \ -+ -+#define EEWIKI_MMC_BOOT \ -+ "mmc_boot=${devtype} dev ${mmcdev}; ${devtype} part; " \ -+ "if ${devtype} rescan; then " \ -+ "echo Scanning ${devtype} device ${mmcdev};" \ -+ "setenv bootpart ${mmcdev}:1; " \ -+ "echo Checking for: /uEnv.txt ...;" \ -+ "if test -e ${devtype} ${bootpart} /uEnv.txt; then " \ -+ "load ${devtype} ${bootpart} ${loadaddr} /uEnv.txt;" \ -+ "env import -t ${loadaddr} ${filesize};" \ -+ "echo Loaded environment from /uEnv.txt;" \ -+ "echo Checking if uenvcmd is set ...;" \ -+ "if test -n ${uenvcmd}; then " \ -+ "echo Running uenvcmd ...;" \ -+ "run uenvcmd;" \ -+ "fi;" \ -+ "fi; " \ -+ "echo Checking for: /boot/uEnv.txt ...;" \ -+ "for i in 1 2 3 4 5 6 7 ; do " \ -+ "setenv mmcpart ${i};" \ -+ "setenv bootpart ${mmcdev}:${mmcpart};" \ -+ "if test -e ${devtype} ${bootpart} /boot/uEnv.txt; then " \ -+ "load ${devtype} ${bootpart} ${loadaddr} /boot/uEnv.txt;" \ -+ "env import -t ${loadaddr} ${filesize};" \ -+ "echo Loaded environment from /boot/uEnv.txt;" \ -+ "if test -n ${dtb}; then " \ -+ "setenv fdtfile ${dtb};" \ -+ "echo debug: [dtb=${fdtfile}] ...;" \ -+ "fi;" \ -+ "echo Checking if uname_r is set in /boot/uEnv.txt ...;" \ -+ "if test -n ${uname_r}; then " \ -+ "echo debug: [uname_r=${uname_r}] ...;" \ -+ "setenv oldroot /dev/mmcblk${mmcdev}p${mmcpart};" \ -+ "run uname_boot;" \ -+ "fi;" \ -+ "fi;" \ -+ "done;" \ -+ "fi;\0" \ -+ -+#define EEWIKI_SCSI_BOOT \ -+ "scsi_boot=${devtype} reset ; " \ -+ "if ${devtype} dev ${mmcdev}; then " \ -+ "echo Scanning ${devtype} device ${mmcdev};" \ -+ "setenv bootpart ${mmcdev}:1; " \ -+ "echo Checking for: /uEnv.txt ...;" \ -+ "if test -e ${devtype} ${bootpart} /uEnv.txt; then " \ -+ "load ${devtype} ${bootpart} ${loadaddr} /uEnv.txt;" \ -+ "env import -t ${loadaddr} ${filesize};" \ -+ "echo Loaded environment from /uEnv.txt;" \ -+ "echo Checking if uenvcmd is set ...;" \ -+ "if test -n ${uenvcmd}; then " \ -+ "echo Running uenvcmd ...;" \ -+ "run uenvcmd;" \ -+ "fi;" \ -+ "fi; " \ -+ "echo Checking for: /boot/uEnv.txt ...;" \ -+ "for i in 1 2 3 4 ; do " \ -+ "setenv mmcpart ${i};" \ -+ "setenv bootpart ${mmcdev}:${mmcpart};" \ -+ "if test -e ${devtype} ${bootpart} /boot/uEnv.txt; then " \ -+ "load ${devtype} ${bootpart} ${loadaddr} /boot/uEnv.txt;" \ -+ "env import -t ${loadaddr} ${filesize};" \ -+ "echo Loaded environment from /boot/uEnv.txt;" \ -+ "if test -n ${dtb}; then " \ -+ "setenv fdtfile ${dtb};" \ -+ "echo debug: [dtb=${fdtfile}] ...;" \ -+ "fi;" \ -+ "echo Checking if uname_r is set in /boot/uEnv.txt ...;" \ -+ "if test -n ${uname_r}; then " \ -+ "echo debug: [uname_r=${uname_r}] ...;" \ -+ "setenv oldroot /dev/sda${mmcpart};" \ -+ "run uname_boot;" \ -+ "fi;" \ -+ "fi;" \ -+ "done;" \ -+ "fi;\0" \ -+ -+#define EEWIKI_USB_BOOT \ -+ "usb_boot=${devtype} reset ; " \ -+ "if ${devtype} dev ${mmcdev}; then " \ -+ "echo Scanning ${devtype} device ${mmcdev};" \ -+ "setenv bootpart ${mmcdev}:1; " \ -+ "echo Checking for: /uEnv.txt ...;" \ -+ "if test -e ${devtype} ${bootpart} /uEnv.txt; then " \ -+ "load ${devtype} ${bootpart} ${loadaddr} /uEnv.txt;" \ -+ "env import -t ${loadaddr} ${filesize};" \ -+ "echo Loaded environment from /uEnv.txt;" \ -+ "echo Checking if uenvcmd is set in /uEnv.txt ...;" \ -+ "if test -n ${uenvcmd}; then " \ -+ "echo Running uenvcmd ...;" \ -+ "run uenvcmd;" \ -+ "fi;" \ -+ "fi; " \ -+ "echo Checking for: /boot/uEnv.txt ...;" \ -+ "for i in 1 2 3 4 ; do " \ -+ "setenv mmcpart ${i};" \ -+ "setenv bootpart ${mmcdev}:${mmcpart};" \ -+ "if test -e ${devtype} ${bootpart} /boot/uEnv.txt; then " \ -+ "load ${devtype} ${bootpart} ${loadaddr} /boot/uEnv.txt;" \ -+ "env import -t ${loadaddr} ${filesize};" \ -+ "echo Loaded environment from /boot/uEnv.txt;" \ -+ "if test -n ${dtb}; then " \ -+ "setenv fdtfile ${dtb};" \ -+ "echo debug: [dtb=${fdtfile}] ...;" \ -+ "fi;" \ -+ "echo Checking if uname_r is set in /boot/uEnv.txt ...;" \ -+ "if test -n ${uname_r}; then " \ -+ "echo debug: [uname_r=${uname_r}] ...;" \ -+ "setenv oldroot /dev/sda${mmcpart};" \ -+ "run uname_boot;" \ -+ "fi;" \ -+ "fi;" \ -+ "done;" \ -+ "fi;\0" \ -+ -+#define EEWIKI_UNAME_BOOT \ -+ "uname_boot="\ -+ "setenv bootdir /boot; " \ -+ "setenv bootfile vmlinuz-${uname_r}; " \ -+ "if test -e ${devtype} ${bootpart} ${bootdir}/${bootfile}; then " \ -+ "echo loading ${bootdir}/${bootfile} ...; "\ -+ "run loadimage;" \ -+ "setenv fdtdir /boot/dtbs/${uname_r}; " \ -+ "if test -e ${devtype} ${bootpart} ${fdtdir}/${fdtfile}; then " \ -+ "run loadfdt;" \ -+ "else " \ -+ "setenv fdtdir /usr/lib/linux-image-${uname_r}; " \ -+ "if test -e ${devtype} ${bootpart} ${fdtdir}/${fdtfile}; then " \ -+ "run loadfdt;" \ -+ "else " \ -+ "setenv fdtdir /lib/firmware/${uname_r}/device-tree; " \ -+ "if test -e ${devtype} ${bootpart} ${fdtdir}/${fdtfile}; then " \ -+ "run loadfdt;" \ -+ "else " \ -+ "setenv fdtdir /boot/dtb-${uname_r}; " \ -+ "if test -e ${devtype} ${bootpart} ${fdtdir}/${fdtfile}; then " \ -+ "run loadfdt;" \ -+ "else " \ -+ "setenv fdtdir /boot/dtbs; " \ -+ "if test -e ${devtype} ${bootpart} ${fdtdir}/${fdtfile}; then " \ -+ "run loadfdt;" \ -+ "else " \ -+ "setenv fdtdir /boot/dtb; " \ -+ "if test -e ${devtype} ${bootpart} ${fdtdir}/${fdtfile}; then " \ -+ "run loadfdt;" \ -+ "else " \ -+ "setenv fdtdir /boot; " \ -+ "if test -e ${devtype} ${bootpart} ${fdtdir}/${fdtfile}; then " \ -+ "run loadfdt;" \ -+ "else " \ -+ "echo; echo unable to find ${fdtfile} ...; echo booting legacy ...;"\ -+ "run args_mmc;" \ -+ "echo debug: [${bootargs}] ... ;" \ -+ "echo debug: [bootz ${loadaddr}] ... ;" \ -+ "bootz ${loadaddr}; " \ -+ "fi;" \ -+ "fi;" \ -+ "fi;" \ -+ "fi;" \ -+ "fi;" \ -+ "fi;" \ -+ "fi; " \ -+ "if test -n ${enable_uboot_overlays}; then " \ -+ "setenv fdt_buffer 0x60000;" \ -+ "if test -n ${uboot_fdt_buffer}; then " \ -+ "setenv fdt_buffer ${uboot_fdt_buffer};" \ -+ "fi;" \ -+ "echo uboot_overlays: [fdt_buffer=${fdt_buffer}] ... ;" \ -+ "if test -n ${uboot_overlay_addr0}; then " \ -+ "if test -n ${disable_uboot_overlay_addr0}; then " \ -+ "echo uboot_overlays: uboot loading of [${uboot_overlay_addr0}] disabled by /boot/uEnv.txt [disable_uboot_overlay_addr0=1]...;" \ -+ "else " \ -+ "setenv uboot_overlay ${uboot_overlay_addr0}; " \ -+ "run virtualloadoverlay;" \ -+ "fi;" \ -+ "fi;" \ -+ "if test -n ${uboot_overlay_addr1}; then " \ -+ "if test -n ${disable_uboot_overlay_addr1}; then " \ -+ "echo uboot_overlays: uboot loading of [${uboot_overlay_addr1}] disabled by /boot/uEnv.txt [disable_uboot_overlay_addr1=1]...;" \ -+ "else " \ -+ "setenv uboot_overlay ${uboot_overlay_addr1}; " \ -+ "run virtualloadoverlay;" \ -+ "fi;" \ -+ "fi;" \ -+ "if test -n ${uboot_overlay_addr2}; then " \ -+ "if test -n ${disable_uboot_overlay_addr2}; then " \ -+ "echo uboot_overlays: uboot loading of [${uboot_overlay_addr2}] disabled by /boot/uEnv.txt [disable_uboot_overlay_addr2=1]...;" \ -+ "else " \ -+ "setenv uboot_overlay ${uboot_overlay_addr2}; " \ -+ "run virtualloadoverlay;" \ -+ "fi;" \ -+ "fi;" \ -+ "if test -n ${uboot_overlay_addr3}; then " \ -+ "if test -n ${disable_uboot_overlay_addr3}; then " \ -+ "echo uboot_overlays: uboot loading of [${uboot_overlay_addr3}] disabled by /boot/uEnv.txt [disable_uboot_overlay_addr3=1]...;" \ -+ "else " \ -+ "setenv uboot_overlay ${uboot_overlay_addr3}; " \ -+ "run virtualloadoverlay;" \ -+ "fi;" \ -+ "fi;" \ -+ "if test -n ${uboot_overlay_addr4}; then " \ -+ "setenv uboot_overlay ${uboot_overlay_addr4}; " \ -+ "run virtualloadoverlay;" \ -+ "fi;" \ -+ "if test -n ${uboot_overlay_addr5}; then " \ -+ "setenv uboot_overlay ${uboot_overlay_addr5}; " \ -+ "run virtualloadoverlay;" \ -+ "fi;" \ -+ "if test -n ${uboot_overlay_addr6}; then " \ -+ "setenv uboot_overlay ${uboot_overlay_addr6}; " \ -+ "run virtualloadoverlay;" \ -+ "fi;" \ -+ "if test -n ${uboot_overlay_addr7}; then " \ -+ "setenv uboot_overlay ${uboot_overlay_addr7}; " \ -+ "run virtualloadoverlay;" \ -+ "fi;" \ -+ "if test -n ${uboot_overlay_pru}; then " \ -+ "setenv uboot_overlay ${uboot_overlay_pru}; " \ -+ "run virtualloadoverlay;" \ -+ "fi;" \ -+ "else " \ -+ "echo uboot_overlays: add [enable_uboot_overlays=1] to /boot/uEnv.txt to enable...;" \ -+ "fi;" \ -+ "setenv rdfile initrd.img-${uname_r}; " \ -+ "if test -e ${devtype} ${bootpart} ${bootdir}/${rdfile}; then " \ -+ "echo loading ${bootdir}/${rdfile} ...; "\ -+ "run loadrd;" \ -+ "if test -n ${netinstall_enable}; then " \ -+ "run args_netinstall; run message;" \ -+ "echo debug: [${bootargs}] ... ;" \ -+ "echo debug: [bootz ${loadaddr} ${rdaddr}:${rdsize} ${fdtaddr}] ... ;" \ -+ "bootz ${loadaddr} ${rdaddr}:${rdsize} ${fdtaddr}; " \ -+ "fi;" \ -+ "if test -n ${uenv_root}; then " \ -+ "run args_uenv_root;" \ -+ "echo debug: [${bootargs}] ... ;" \ -+ "echo debug: [bootz ${loadaddr} ${rdaddr}:${rdsize} ${fdtaddr}] ... ;" \ -+ "bootz ${loadaddr} ${rdaddr}:${rdsize} ${fdtaddr}; " \ -+ "fi;" \ -+ "if test -n ${uuid}; then " \ -+ "run args_mmc_uuid;" \ -+ "echo debug: [${bootargs}] ... ;" \ -+ "echo debug: [bootz ${loadaddr} ${rdaddr}:${rdsize} ${fdtaddr}] ... ;" \ -+ "bootz ${loadaddr} ${rdaddr}:${rdsize} ${fdtaddr}; " \ -+ "else " \ -+ "run args_mmc_old;" \ -+ "echo debug: [${bootargs}] ... ;" \ -+ "echo debug: [bootz ${loadaddr} ${rdaddr}:${rdsize} ${fdtaddr}] ... ;" \ -+ "bootz ${loadaddr} ${rdaddr}:${rdsize} ${fdtaddr}; " \ -+ "fi;" \ -+ "else " \ -+ "if test -n ${uenv_root}; then " \ -+ "run args_uenv_root;" \ -+ "echo debug: [${bootargs}] ... ;" \ -+ "echo debug: [bootz ${loadaddr} - ${fdtaddr}] ... ;" \ -+ "bootz ${loadaddr} - ${fdtaddr}; " \ -+ "fi;" \ -+ "run args_mmc_old;" \ -+ "echo debug: [${bootargs}] ... ;" \ -+ "echo debug: [bootz ${loadaddr} - ${fdtaddr}] ... ;" \ -+ "bootz ${loadaddr} - ${fdtaddr}; " \ -+ "fi;" \ -+ "fi;\0" \ -+ - /* - * The following are general good-enough settings for U-Boot. We set a - * large malloc pool as we generally have a lot of DDR, and we opt for -diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h -index de0a6af2fd..0cd2ccea03 100644 ---- a/include/configs/ti_omap5_common.h -+++ b/include/configs/ti_omap5_common.h -@@ -64,6 +64,11 @@ - DEFAULT_FIT_TI_ARGS \ - DEFAULT_COMMON_BOOT_TI_ARGS \ - DEFAULT_FDT_TI_ARGS \ -+ EEWIKI_USB_BOOT \ -+ EEWIKI_SCSI_BOOT \ -+ EEWIKI_MMC_BOOT \ -+ EEWIKI_UNAME_BOOT \ -+ EEPROM_PROGRAMMING \ - DFUARGS \ - NETARGS \ - NANDARGS \ -diff --git a/include/environment/ti/boot.h b/include/environment/ti/boot.h -index a9d8f28d46..1480b6e3df 100644 ---- a/include/environment/ti/boot.h -+++ b/include/environment/ti/boot.h -@@ -132,6 +132,7 @@ - "bootpart=0:2\0" \ - "bootdir=/boot\0" \ - "bootfile=zImage\0" \ -+ "board_eeprom_header=undefined\0" \ - "usbtty=cdc_acm\0" \ - "vram=16M\0" \ - AVB_VERIFY_CMD \ -@@ -183,7 +184,14 @@ - "else " \ - "echo $apart partition not found; " \ - "exit; " \ -- "fi;\0" -+ "fi;\0 " \ -+ "read_board_eeprom=" \ -+ "if test $board_eeprom_header = beagle_x15_revb1_blank; then " \ -+ "run eeprom_dump; run eeprom_x15_b1; reset; fi; " \ -+ "if test $board_eeprom_header = beagle_x15_revc_blank; then " \ -+ "run eeprom_dump; run eeprom_x15_c; reset; fi; " \ -+ "if test $board_eeprom_header = bbai_a2_blank; then " \ -+ "run eeprom_dump; run eeprom_bbai_a2; reset; fi; \0 " - - #ifdef CONFIG_OMAP54XX - -@@ -223,19 +231,17 @@ - "echo WARNING: Could not determine device tree to use; fi; \0" - - #define CONFIG_BOOTCOMMAND \ -- "if test ${dofastboot} -eq 1; then " \ -- "echo Boot fastboot requested, resetting dofastboot ...;" \ -- "setenv dofastboot 0; saveenv;" \ -- FASTBOOT_CMD \ -- "fi;" \ -- "if test ${boot_fit} -eq 1; then " \ -- "run update_to_fit;" \ -- "fi;" \ -+ "run read_board_eeprom; " \ - "run findfdt; " \ -- "run envboot; " \ -- "run mmcboot;" \ -- "run emmc_linux_boot; " \ -- "run emmc_android_boot; " \ -+ "setenv mmcdev 0; " \ -+ "setenv devtype usb; " \ -+ "echo usb_boot is currently disabled;" \ -+ "setenv devtype scsi; " \ -+ "echo scsi_boot is currently disabled;" \ -+ "setenv devtype mmc; " \ -+ "run mmc_boot;" \ -+ "setenv mmcdev 1; " \ -+ "run mmc_boot;" \ - "" - - #endif /* CONFIG_OMAP54XX */ -diff --git a/include/environment/ti/mmc.h b/include/environment/ti/mmc.h -index b86c8dc7a4..0ec09f279a 100644 ---- a/include/environment/ti/mmc.h -+++ b/include/environment/ti/mmc.h -@@ -11,11 +11,31 @@ - #define DEFAULT_MMC_TI_ARGS \ - "mmcdev=0\0" \ - "mmcrootfstype=ext4 rootwait\0" \ -- "finduuid=part uuid mmc ${bootpart} uuid\0" \ -+ "finduuid=part uuid ${devtype} ${bootpart} uuid\0" \ - "args_mmc=run finduuid;setenv bootargs console=${console} " \ - "${optargs} " \ -- "root=PARTUUID=${uuid} rw " \ -- "rootfstype=${mmcrootfstype}\0" \ -+ "root=PARTUUID=${uuid} ro " \ -+ "rootfstype=${mmcrootfstype} " \ -+ "${cmdline}\0" \ -+ "args_mmc_old=setenv bootargs console=${console} " \ -+ "${optargs} " \ -+ "root=${oldroot} ro " \ -+ "rootfstype=${mmcrootfstype} " \ -+ "${cmdline}\0" \ -+ "args_mmc_uuid=setenv bootargs console=${console} " \ -+ "${optargs} " \ -+ "root=UUID=${uuid} ro " \ -+ "rootfstype=${mmcrootfstype} " \ -+ "${cmdline}\0" \ -+ "args_uenv_root=setenv bootargs console=${console} " \ -+ "${optargs} " \ -+ "root=${uenv_root} ro " \ -+ "rootfstype=${mmcrootfstype} " \ -+ "${musb} ${cmdline}\0" \ -+ "args_netinstall=setenv bootargs ${netinstall_bootargs} " \ -+ "${optargs} " \ -+ "root=/dev/ram rw " \ -+ "${cmdline}\0" \ - "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \ - "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \ - "source ${loadaddr}\0" \ -@@ -24,7 +44,28 @@ - "env import -t ${loadaddr} ${filesize}\0" \ - "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenvfile}\0" \ - "loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ -- "loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ -+ "loadrd=load ${devtype} ${bootpart} ${rdaddr} ${bootdir}/${rdfile}; setenv rdsize ${filesize}\0" \ -+ "loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load ${devtype} ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \ -+ "loadoverlay=echo uboot_overlays: loading ${actual_uboot_overlay} ...; " \ -+ "load ${devtype} ${bootpart} ${rdaddr} ${actual_uboot_overlay}; " \ -+ "fdt addr ${fdtaddr}; fdt resize ${fdt_buffer}; " \ -+ "fdt apply ${rdaddr}; fdt resize ${fdt_buffer};\0" \ -+ "virtualloadoverlay=if test -e ${devtype} ${bootpart} ${fdtdir}/overlays/${uboot_overlay}; then " \ -+ "setenv actual_uboot_overlay ${fdtdir}/overlays/${uboot_overlay}; " \ -+ "run loadoverlay;" \ -+ "else " \ -+ "if test -e ${devtype} ${bootpart} /lib/firmware/${uboot_overlay}; then " \ -+ "setenv actual_uboot_overlay /lib/firmware/${uboot_overlay}; " \ -+ "run loadoverlay;" \ -+ "else " \ -+ "if test -e ${devtype} ${bootpart} ${uboot_overlay}; then " \ -+ "setenv actual_uboot_overlay ${uboot_overlay}; " \ -+ "run loadoverlay;" \ -+ "else " \ -+ "echo uboot_overlays: unable to find [${devtype} ${bootpart} ${uboot_overlay}]...;" \ -+ "fi;" \ -+ "fi;" \ -+ "fi;\0" \ - "envboot=mmc dev ${mmcdev}; " \ - "if mmc rescan; then " \ - "echo SD/MMC found on device ${mmcdev};" \ --- -2.20.1 - diff --git a/board/beagleboard/beagleboneai/patches/uboot/uboot.hash b/board/beagleboard/beagleboneai/patches/uboot/uboot.hash index 4b82872f31e..80ea21b7cb4 100644 --- a/board/beagleboard/beagleboneai/patches/uboot/uboot.hash +++ b/board/beagleboard/beagleboneai/patches/uboot/uboot.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 0d438b1bb5cceb57a18ea2de4a0d51f7be5b05b98717df05938636e0aadfe11a u-boot-2021.04.tar.bz2 +sha256 439d3bef296effd54130be6a731c5b118be7fddd7fcc663ccbc5fb18294d8718 u-boot-2025.04.tar.bz2 diff --git a/board/beagleboard/beagleboneai/post-build.sh b/board/beagleboard/beagleboneai/post-build.sh index 384b4d87452..8d94a8f1e45 100755 --- a/board/beagleboard/beagleboneai/post-build.sh +++ b/board/beagleboard/beagleboneai/post-build.sh @@ -1,4 +1,3 @@ #!/bin/sh -BOARD_DIR="$(dirname $0)" -cp board/beagleboard/beagleboneai/uEnv.txt $BINARIES_DIR/uEnv.txt +cp board/beagleboard/beagleboneai/uEnv.txt "$BINARIES_DIR/uEnv.txt" diff --git a/board/beagleboard/beagleboneai64/patches/arm-trusted-firmware/arm-trusted-firmware.hash b/board/beagleboard/beagleboneai64/patches/arm-trusted-firmware/arm-trusted-firmware.hash deleted file mode 100644 index 6f02bfbb22e..00000000000 --- a/board/beagleboard/beagleboneai64/patches/arm-trusted-firmware/arm-trusted-firmware.hash +++ /dev/null @@ -1,2 +0,0 @@ -# Locally calculated -sha256 7efa89e1b4e4106ee05d68e876c8efbb146364d89cfd5d26bf4647b09c08f32b arm-trusted-firmware-v2.10-git4.tar.gz diff --git a/board/beagleboard/beagleboneai64/patches/linux/linux.hash b/board/beagleboard/beagleboneai64/patches/linux/linux.hash index 4b20a009a7e..eb4dcee9586 100644 --- a/board/beagleboard/beagleboneai64/patches/linux/linux.hash +++ b/board/beagleboard/beagleboneai64/patches/linux/linux.hash @@ -1,2 +1,2 @@ -# Locally calculated -sha256 b66a5b863b0f8669448b74ca83bd641a856f164b29956e539bbcb5fdeeab9cc6 linux-6.6.30.tar.xz +# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc +sha256 4f21c01f4d04c1d1b3ed794153f8900802c92497be620b07c4869530f2d28ee3 linux-6.18.16.tar.xz diff --git a/board/beagleboard/beagleboneai64/patches/ti-k3-r5-loader/ti-k3-r5-loader.hash b/board/beagleboard/beagleboneai64/patches/ti-k3-r5-loader/ti-k3-r5-loader.hash index 97a2b4eaf95..b6a925ea4e8 100644 --- a/board/beagleboard/beagleboneai64/patches/ti-k3-r5-loader/ti-k3-r5-loader.hash +++ b/board/beagleboard/beagleboneai64/patches/ti-k3-r5-loader/ti-k3-r5-loader.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 18a853fe39fad7ad03a90cc2d4275aeaed6da69735defac3492b80508843dd4a u-boot-2024.04.tar.bz2 +sha256 b60d5865cefdbc75da8da4156c56c458e00de75a49b80c1a2e58a96e30ad0d54 u-boot-2026.01.tar.bz2 diff --git a/board/beagleboard/beagleboneai64/patches/uboot/uboot.hash b/board/beagleboard/beagleboneai64/patches/uboot/uboot.hash index 97a2b4eaf95..b6a925ea4e8 100644 --- a/board/beagleboard/beagleboneai64/patches/uboot/uboot.hash +++ b/board/beagleboard/beagleboneai64/patches/uboot/uboot.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 18a853fe39fad7ad03a90cc2d4275aeaed6da69735defac3492b80508843dd4a u-boot-2024.04.tar.bz2 +sha256 b60d5865cefdbc75da8da4156c56c458e00de75a49b80c1a2e58a96e30ad0d54 u-boot-2026.01.tar.bz2 diff --git a/board/beagleboard/beagleplay/patches/arm-trusted-firmware/arm-trusted-firmware.hash b/board/beagleboard/beagleplay/patches/arm-trusted-firmware/arm-trusted-firmware.hash index 8b77e1f1653..2e24bcd0de5 100644 --- a/board/beagleboard/beagleplay/patches/arm-trusted-firmware/arm-trusted-firmware.hash +++ b/board/beagleboard/beagleplay/patches/arm-trusted-firmware/arm-trusted-firmware.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 c0f23ccc71c49989e9ad238acf334473c17b7c88f79a20c829c3d443e3794a22 arm-trusted-firmware-v2.11-git4.tar.gz +sha256 b807d8bf190b7c46b4260729b4bbe2f7df83cd1086edcb181d66595ae6598d23 arm-trusted-firmware-v2.15.0-git4.tar.gz diff --git a/board/beagleboard/beagleplay/patches/linux/linux.hash b/board/beagleboard/beagleplay/patches/linux/linux.hash index 53eb1438945..49bf75b9242 100644 --- a/board/beagleboard/beagleplay/patches/linux/linux.hash +++ b/board/beagleboard/beagleplay/patches/linux/linux.hash @@ -1,2 +1,2 @@ -# Locally calculated -sha256 774698422ee54c5f1e704456f37c65c06b51b4e9a8b0866f34580d86fef8e226 linux-6.10.tar.xz +# From https://www.kernel.org/pub/linux/kernel/v7.x/sha256sums.asc +sha256 2feaa70453e91f541be6a5c9078d8168e081af45a3d9718054850538cff2ebf3 linux-7.2.10.tar.xz diff --git a/board/beagleboard/beagleplay/patches/ti-k3-r5-loader/0001-pylibfdt-Replace-removed-SWIG-Python-2-compatibility.patch b/board/beagleboard/beagleplay/patches/ti-k3-r5-loader/0001-pylibfdt-Replace-removed-SWIG-Python-2-compatibility.patch new file mode 100644 index 00000000000..10968ce8760 --- /dev/null +++ b/board/beagleboard/beagleplay/patches/ti-k3-r5-loader/0001-pylibfdt-Replace-removed-SWIG-Python-2-compatibility.patch @@ -0,0 +1,67 @@ +From 527115ef6783cec49e5610c523c124b399011361 Mon Sep 17 00:00:00 2001 +From: Jaipaul Cheernam +Date: Tue, 11 Aug 2026 15:34:33 +0200 +Subject: [PATCH] pylibfdt: Replace removed SWIG Python 2 compatibility macros +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +SWIG 4.5.0 removed Python 2 compatibility macros (PyInt_*, PyString_*) +from its runtime header pyhead.swg (see commit 79f7a2b7cb7d). Replace +them with their Python 3 C API equivalents: + +- PyString_FromString -> PyUnicode_FromString +- PyString_AsString -> PyBytes_AsString +- PyInt_AsLong -> PyLong_AsLong + +The replacements are safe since the macros were already aliased to +these exact functions in SWIG's Python 3 code path. + +This is a backport of dtc commit 5008d1d6a356 ("pylibfdt: Replace +removed SWIG Python 2 compatibility macros"). + +Signed-off-by: Jaipaul Cheernam +Reviewed-by: Jérémie Dautheribes +Tested-by: Jérémie Dautheribes +Signed-off-by: Peter Robinson +Reviewed-by: Peter Robinson +Upstream: https://git.u-boot-project.org/u-boot/u-boot/-/commit/527115ef6783cec49e5610c523c124b399011361 +Signed-off-by: Julien Olivain +--- + scripts/dtc/pylibfdt/libfdt.i_shipped | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +diff --git a/scripts/dtc/pylibfdt/libfdt.i_shipped b/scripts/dtc/pylibfdt/libfdt.i_shipped +index e4659489a96ab..326a15c7941e3 100644 +--- a/scripts/dtc/pylibfdt/libfdt.i_shipped ++++ b/scripts/dtc/pylibfdt/libfdt.i_shipped +@@ -1033,7 +1033,7 @@ typedef uint32_t fdt32_t; + PyObject *buff; + + if ($1) { +- resultobj = PyString_FromString( ++ resultobj = PyUnicode_FromString( + fdt_string(fdt1, fdt32_to_cpu($1->nameoff))); + buff = PyByteArray_FromStringAndSize( + (const char *)($1 + 1), fdt32_to_cpu($1->len)); +@@ -1064,13 +1064,13 @@ typedef uint32_t fdt32_t; + } + $1 = PyBytes_AsString($input); + %#else +- $1 = PyString_AsString($input); /* char *str */ ++ $1 = PyBytes_AsString($input); /* char *str */ + %#endif + } + + /* typemaps used for fdt_next_node() */ + %typemap(in, numinputs=1) int *depth (int depth) { +- depth = (int) PyInt_AsLong($input); ++ depth = (int) PyLong_AsLong($input); + $1 = &depth; + } + + +base-commit: 1262e50a34a0e01f974e8d909c5b255f8fa7199e +-- +2.55.0 + diff --git a/board/beagleboard/beagleplay/patches/uboot/0001-pylibfdt-Replace-removed-SWIG-Python-2-compatibility.patch b/board/beagleboard/beagleplay/patches/uboot/0001-pylibfdt-Replace-removed-SWIG-Python-2-compatibility.patch new file mode 100644 index 00000000000..10968ce8760 --- /dev/null +++ b/board/beagleboard/beagleplay/patches/uboot/0001-pylibfdt-Replace-removed-SWIG-Python-2-compatibility.patch @@ -0,0 +1,67 @@ +From 527115ef6783cec49e5610c523c124b399011361 Mon Sep 17 00:00:00 2001 +From: Jaipaul Cheernam +Date: Tue, 11 Aug 2026 15:34:33 +0200 +Subject: [PATCH] pylibfdt: Replace removed SWIG Python 2 compatibility macros +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +SWIG 4.5.0 removed Python 2 compatibility macros (PyInt_*, PyString_*) +from its runtime header pyhead.swg (see commit 79f7a2b7cb7d). Replace +them with their Python 3 C API equivalents: + +- PyString_FromString -> PyUnicode_FromString +- PyString_AsString -> PyBytes_AsString +- PyInt_AsLong -> PyLong_AsLong + +The replacements are safe since the macros were already aliased to +these exact functions in SWIG's Python 3 code path. + +This is a backport of dtc commit 5008d1d6a356 ("pylibfdt: Replace +removed SWIG Python 2 compatibility macros"). + +Signed-off-by: Jaipaul Cheernam +Reviewed-by: Jérémie Dautheribes +Tested-by: Jérémie Dautheribes +Signed-off-by: Peter Robinson +Reviewed-by: Peter Robinson +Upstream: https://git.u-boot-project.org/u-boot/u-boot/-/commit/527115ef6783cec49e5610c523c124b399011361 +Signed-off-by: Julien Olivain +--- + scripts/dtc/pylibfdt/libfdt.i_shipped | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +diff --git a/scripts/dtc/pylibfdt/libfdt.i_shipped b/scripts/dtc/pylibfdt/libfdt.i_shipped +index e4659489a96ab..326a15c7941e3 100644 +--- a/scripts/dtc/pylibfdt/libfdt.i_shipped ++++ b/scripts/dtc/pylibfdt/libfdt.i_shipped +@@ -1033,7 +1033,7 @@ typedef uint32_t fdt32_t; + PyObject *buff; + + if ($1) { +- resultobj = PyString_FromString( ++ resultobj = PyUnicode_FromString( + fdt_string(fdt1, fdt32_to_cpu($1->nameoff))); + buff = PyByteArray_FromStringAndSize( + (const char *)($1 + 1), fdt32_to_cpu($1->len)); +@@ -1064,13 +1064,13 @@ typedef uint32_t fdt32_t; + } + $1 = PyBytes_AsString($input); + %#else +- $1 = PyString_AsString($input); /* char *str */ ++ $1 = PyBytes_AsString($input); /* char *str */ + %#endif + } + + /* typemaps used for fdt_next_node() */ + %typemap(in, numinputs=1) int *depth (int depth) { +- depth = (int) PyInt_AsLong($input); ++ depth = (int) PyLong_AsLong($input); + $1 = &depth; + } + + +base-commit: 1262e50a34a0e01f974e8d909c5b255f8fa7199e +-- +2.55.0 + diff --git a/board/beagleboard/beagleplay/patches/uboot/uboot.hash b/board/beagleboard/beagleplay/patches/uboot/uboot.hash index fe9b4f53dc6..ff6e4ed2e2f 100644 --- a/board/beagleboard/beagleplay/patches/uboot/uboot.hash +++ b/board/beagleboard/beagleplay/patches/uboot/uboot.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 f591da9ab90ef3d6b3d173766d0ddff90c4ed7330680897486117df390d83c8f u-boot-2024.07.tar.bz2 +sha256 78e8bfc382fe388f9b55aa1daf8c563522a037779b5d4c349d1415e381f1243e u-boot-2026.07.tar.bz2 diff --git a/board/beagleboard/beaglev_fire/boot.cmd b/board/beagleboard/beaglev_fire/boot.cmd index 1402458d8b8..80b44592c77 100644 --- a/board/beagleboard/beaglev_fire/boot.cmd +++ b/board/beagleboard/beaglev_fire/boot.cmd @@ -11,6 +11,5 @@ bootm loados ${scriptaddr}; # Try to load a ramdisk if available inside fitImage bootm ramdisk; bootm prep; -fdt set /soc/ethernet@20110000 mac-address ${beaglevfire_mac_addr0}; run design_overlays; bootm go; diff --git a/board/beagleboard/beaglev_fire/patches/linux/linux.hash b/board/beagleboard/beaglev_fire/patches/linux/linux.hash index 9ee63df23d3..2902da56b63 100644 --- a/board/beagleboard/beaglev_fire/patches/linux/linux.hash +++ b/board/beagleboard/beaglev_fire/patches/linux/linux.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 7bd234a93bc6351d6a830f9ef18e9e780d70c478d280a6513a30bc2f945fb050 linux-linux4microchip+fpga-2024.09.1.tar.gz +sha256 37191994758d521dc7223cb5010a67ef83bd061bf70194ea522abc9ef2b17391 linux-linux4microchip+fpga-2025.10.tar.gz diff --git a/board/beagleboard/beaglev_fire/patches/uboot/uboot.hash b/board/beagleboard/beaglev_fire/patches/uboot/uboot.hash index cb0ec5ec524..a40f963a2e4 100644 --- a/board/beagleboard/beaglev_fire/patches/uboot/uboot.hash +++ b/board/beagleboard/beaglev_fire/patches/uboot/uboot.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 a2fad7fe7f933fa4679b070e952e1e7a21dbd8b586d7a9a11bfcb99e75ae7ad6 uboot-linux4microchip+fpga-2024.09.tar.gz +sha256 591c80f7e16d6f43192deb7ab7587ae81b31ba7c7de1a668c14b9997b6c976c8 uboot-linux4microchip+fpga-2025.10.tar.gz diff --git a/board/beagleboard/beagley-ai/patches/linux/linux.hash b/board/beagleboard/beagley-ai/patches/linux/linux.hash index 794837b2858..eb4dcee9586 100644 --- a/board/beagleboard/beagley-ai/patches/linux/linux.hash +++ b/board/beagleboard/beagley-ai/patches/linux/linux.hash @@ -1,2 +1,2 @@ -# Locally calculated -sha256 2bb586c954277d070c8fdf6d7275faa93b4807d9bf3353b491d8149cca02b4fc linux-6.15.6.tar.xz +# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc +sha256 4f21c01f4d04c1d1b3ed794153f8900802c92497be620b07c4869530f2d28ee3 linux-6.18.16.tar.xz diff --git a/board/beagleboard/beagley-ai/patches/ti-k3-r5-loader/ti-k3-r5-loader.hash b/board/beagleboard/beagley-ai/patches/ti-k3-r5-loader/ti-k3-r5-loader.hash index 440526977bd..b6a925ea4e8 100644 --- a/board/beagleboard/beagley-ai/patches/ti-k3-r5-loader/ti-k3-r5-loader.hash +++ b/board/beagleboard/beagley-ai/patches/ti-k3-r5-loader/ti-k3-r5-loader.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 0f933f6c5a426895bf306e93e6ac53c60870e4b54cda56d95211bec99e63bec7 u-boot-2025.07.tar.bz2 +sha256 b60d5865cefdbc75da8da4156c56c458e00de75a49b80c1a2e58a96e30ad0d54 u-boot-2026.01.tar.bz2 diff --git a/board/beagleboard/beagley-ai/patches/uboot/uboot.hash b/board/beagleboard/beagley-ai/patches/uboot/uboot.hash index 440526977bd..b6a925ea4e8 100644 --- a/board/beagleboard/beagley-ai/patches/uboot/uboot.hash +++ b/board/beagleboard/beagley-ai/patches/uboot/uboot.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 0f933f6c5a426895bf306e93e6ac53c60870e4b54cda56d95211bec99e63bec7 u-boot-2025.07.tar.bz2 +sha256 b60d5865cefdbc75da8da4156c56c458e00de75a49b80c1a2e58a96e30ad0d54 u-boot-2026.01.tar.bz2 diff --git a/board/bsh/common/imx8mn-bsh-smm-s2/patches/linux/linux.hash b/board/bsh/common/imx8mn-bsh-smm-s2/patches/linux/linux.hash index 839b62862a6..50ea35890f9 100644 --- a/board/bsh/common/imx8mn-bsh-smm-s2/patches/linux/linux.hash +++ b/board/bsh/common/imx8mn-bsh-smm-s2/patches/linux/linux.hash @@ -1,2 +1,2 @@ # From https://cdn.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc -sha256 6e562502a8fd11639f558e43b74f0df0d85fa85e60f5332acb275a75a35f5345 linux-6.12.39.tar.xz +sha256 164dc9d1f6c93c61a15e1f071c48379b467f2b17c469cce7223471968208ed03 linux-6.12.112.tar.xz diff --git a/board/bsh/common/imx8mn-bsh-smm-s2/patches/uboot/uboot.hash b/board/bsh/common/imx8mn-bsh-smm-s2/patches/uboot/uboot.hash index 440526977bd..66c72d3afd5 100644 --- a/board/bsh/common/imx8mn-bsh-smm-s2/patches/uboot/uboot.hash +++ b/board/bsh/common/imx8mn-bsh-smm-s2/patches/uboot/uboot.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 0f933f6c5a426895bf306e93e6ac53c60870e4b54cda56d95211bec99e63bec7 u-boot-2025.07.tar.bz2 +sha256 3f856da3cbbc93af51ff95fde18588a348b4a26723b01d9841e999d988481015 u-boot-2026.10.tar.bz2 diff --git a/board/bsh/imx6ulz-bsh-smm-m2/patches/linux/linux.hash b/board/bsh/imx6ulz-bsh-smm-m2/patches/linux/linux.hash index 32ed4d2a08d..1a1d6e9a3ef 100644 --- a/board/bsh/imx6ulz-bsh-smm-m2/patches/linux/linux.hash +++ b/board/bsh/imx6ulz-bsh-smm-m2/patches/linux/linux.hash @@ -1,2 +1,2 @@ # From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc -sha256 4a168aed2de5a81aadd90ba2b153860a98d99bfc34651936e17f18e54f01ba8c linux-6.12.36.tar.xz +sha256 164dc9d1f6c93c61a15e1f071c48379b467f2b17c469cce7223471968208ed03 linux-6.12.112.tar.xz diff --git a/board/bsh/imx6ulz-bsh-smm-m2/patches/uboot/uboot.hash b/board/bsh/imx6ulz-bsh-smm-m2/patches/uboot/uboot.hash index 440526977bd..66c72d3afd5 100644 --- a/board/bsh/imx6ulz-bsh-smm-m2/patches/uboot/uboot.hash +++ b/board/bsh/imx6ulz-bsh-smm-m2/patches/uboot/uboot.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 0f933f6c5a426895bf306e93e6ac53c60870e4b54cda56d95211bec99e63bec7 u-boot-2025.07.tar.bz2 +sha256 3f856da3cbbc93af51ff95fde18588a348b4a26723b01d9841e999d988481015 u-boot-2026.10.tar.bz2 diff --git a/board/bsh/imx6ulz-bsh-smm-m2/post-build.sh b/board/bsh/imx6ulz-bsh-smm-m2/post-build.sh index eac82cc22af..4a9bc1cfd50 100755 --- a/board/bsh/imx6ulz-bsh-smm-m2/post-build.sh +++ b/board/bsh/imx6ulz-bsh-smm-m2/post-build.sh @@ -1,4 +1,6 @@ #!/bin/sh +set -eu + BOARD_DIR="$(dirname "$0")" cp "${BOARD_DIR}/nand-full.lst" "${BINARIES_DIR}" diff --git a/board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh b/board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh index bf8861f6a91..9306df3f3ff 100755 --- a/board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh +++ b/board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh @@ -1,4 +1,6 @@ #!/bin/sh +set -eu + BOARD_DIR="$(dirname $0)" PARTUUID="$($HOST_DIR/bin/uuidgen)" diff --git a/board/bsh/imx8mn-bsh-smm-s2/post-build.sh b/board/bsh/imx8mn-bsh-smm-s2/post-build.sh index 49df4cd6fb1..ede1738ecbc 100755 --- a/board/bsh/imx8mn-bsh-smm-s2/post-build.sh +++ b/board/bsh/imx8mn-bsh-smm-s2/post-build.sh @@ -1,4 +1,6 @@ #!/bin/sh +set -eu + BOARD_DIR="$(dirname $0)" cp ${BOARD_DIR}/nand-full.lst ${BINARIES_DIR} diff --git a/board/compulab/iot-gate-imx8-ebbr/genimage.cfg b/board/compulab/iot-gate-imx8-ebbr/genimage.cfg new file mode 100644 index 00000000000..feda4c7c098 --- /dev/null +++ b/board/compulab/iot-gate-imx8-ebbr/genimage.cfg @@ -0,0 +1,45 @@ +image efi-part.vfat { + vfat { + file EFI { + image = "efi-part/EFI" + } + + file Image { + image = "Image" + } + } + + size = 64M +} + +image disk.img { + hdimage { + partition-table-type = "gpt" + } + + # When in eMMC user data, this protects U-Boot environment + partition env { + partition-type-uuid = u-boot-env + offset = 17K + size = 16K + } + + # This allows to boot from recovery SD card + partition firmware { + image = "flash.bin" + # Linux reserved + partition-type-uuid = 8DA63339-0007-60C0-C436-083AC8230908 + offset = 33K + } + + partition boot { + image = "efi-part.vfat" + partition-type-uuid = esp + bootable = true + } + + partition root { + partition-type-uuid = root-arm64 + image = "rootfs.ext2" + } +} diff --git a/board/compulab/iot-gate-imx8-ebbr/grub.cfg b/board/compulab/iot-gate-imx8-ebbr/grub.cfg new file mode 100644 index 00000000000..d99e19c4cd5 --- /dev/null +++ b/board/compulab/iot-gate-imx8-ebbr/grub.cfg @@ -0,0 +1,6 @@ +set default="0" +set timeout="5" + +menuentry "Buildroot" { + linux /Image root=PARTLABEL=root rootwait +} diff --git a/board/compulab/iot-gate-imx8-ebbr/patches/arm-trusted-firmware/arm-trusted-firmware.hash b/board/compulab/iot-gate-imx8-ebbr/patches/arm-trusted-firmware/arm-trusted-firmware.hash new file mode 100644 index 00000000000..49079ecd7e1 --- /dev/null +++ b/board/compulab/iot-gate-imx8-ebbr/patches/arm-trusted-firmware/arm-trusted-firmware.hash @@ -0,0 +1,2 @@ +# Locally calculated +sha256 e11880bf39dabfcb5945b58e848ddba661a1cd92425a997c626dec62b2dac6a9 arm-trusted-firmware-v2.13-git4.tar.gz diff --git a/board/beagleboard/beagley-ai/patches/linux-headers/linux-headers.hash b/board/compulab/iot-gate-imx8-ebbr/patches/linux-headers/linux-headers.hash similarity index 100% rename from board/beagleboard/beagley-ai/patches/linux-headers/linux-headers.hash rename to board/compulab/iot-gate-imx8-ebbr/patches/linux-headers/linux-headers.hash diff --git a/board/compulab/iot-gate-imx8-ebbr/patches/linux/linux.hash b/board/compulab/iot-gate-imx8-ebbr/patches/linux/linux.hash new file mode 100644 index 00000000000..3f3de0911f0 --- /dev/null +++ b/board/compulab/iot-gate-imx8-ebbr/patches/linux/linux.hash @@ -0,0 +1,2 @@ +# From https://cdn.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc +sha256 231311bd7084dc3129944d26bb43be6ff837da82fb2104a67704aebca8bfa69f linux-6.16.8.tar.xz diff --git a/board/compulab/iot-gate-imx8-ebbr/patches/optee-client/optee-client.hash b/board/compulab/iot-gate-imx8-ebbr/patches/optee-client/optee-client.hash new file mode 100644 index 00000000000..e82a2dff1de --- /dev/null +++ b/board/compulab/iot-gate-imx8-ebbr/patches/optee-client/optee-client.hash @@ -0,0 +1,2 @@ +# Locally calculated +sha256 e6c6b93e2be417df57ceb05a2eb6505744e3fbdd3b2ae5e5bf79bf6028b6f84d optee-client-4.7.0.tar.gz diff --git a/board/compulab/iot-gate-imx8-ebbr/patches/optee-os/optee-os.hash b/board/compulab/iot-gate-imx8-ebbr/patches/optee-os/optee-os.hash new file mode 100644 index 00000000000..672e2a9203f --- /dev/null +++ b/board/compulab/iot-gate-imx8-ebbr/patches/optee-os/optee-os.hash @@ -0,0 +1,2 @@ +# Locally calculated +sha256 976b9c184678516038d4e79766608e81d10bf136f76fd0db2dc48f90f994fbd9 optee-os-4.7.0.tar.gz diff --git a/board/compulab/iot-gate-imx8-ebbr/patches/uboot/uboot.hash b/board/compulab/iot-gate-imx8-ebbr/patches/uboot/uboot.hash new file mode 100644 index 00000000000..b6a925ea4e8 --- /dev/null +++ b/board/compulab/iot-gate-imx8-ebbr/patches/uboot/uboot.hash @@ -0,0 +1,2 @@ +# Locally calculated +sha256 b60d5865cefdbc75da8da4156c56c458e00de75a49b80c1a2e58a96e30ad0d54 u-boot-2026.01.tar.bz2 diff --git a/board/compulab/iot-gate-imx8-ebbr/post-image.sh b/board/compulab/iot-gate-imx8-ebbr/post-image.sh new file mode 100755 index 00000000000..4e60504300b --- /dev/null +++ b/board/compulab/iot-gate-imx8-ebbr/post-image.sh @@ -0,0 +1,69 @@ +#!/bin/sh +set -eux + +BOARD_DIR=$(dirname "$0") + +# Override the default GRUB configuration file with our own. +cp -vf "${BOARD_DIR}/grub.cfg" "${BINARIES_DIR}/efi-part/EFI/BOOT/grub.cfg" + +BINMAN_DIR="$BINARIES_DIR/binman" +BINMAN_DTB="$BINMAN_DIR/u-boot.dtb" +UBOOT_DIR=$(find "$BUILD_DIR" -maxdepth 1 -type d -name 'uboot-*') + +# Adjust binman dtb. +rm -fr "$BINMAN_DIR" +mkdir -v "$BINMAN_DIR" +cp -v "$UBOOT_DIR/u-boot.dtb" "$BINMAN_DTB" +# Add the fip image to the list of loadables. +fdtput -t s "$BINMAN_DTB" /binman/section/fit/configurations/@config-SEQ loadables atf fip +# Remove the tee node to avoid duplicate, as it is in the FIP image. +fdtput --remove "$BINMAN_DTB" /binman/section/fit/images/tee + +# Generate flash image with binman. +# We do this here to break the build dependency loop involving tf-a, op-tee, and +# u-boot. +# We use BL2 instead of BL31 in this configuration. +(cd "${UBOOT_DIR}" && \ +./tools/binman/binman \ + --toolpath ./tools \ + -v5 \ + build \ + -u \ + -d "$BINMAN_DTB" \ + -O . \ + -m \ + --allow-missing \ + --fake-ext-blobs \ + -I "$BINMAN_DIR" \ + -I . \ + -I ./board/compulab/imx8mm-cl-iot-gate \ + -I arch/arm/dts \ + -a of-list="imx8mm-cl-iot-gate-optee" \ + -I "$BINARIES_DIR" \ + -a atf-bl31-path=bl2.bin \ + -a tee-os-path= \ + -a ti-dm-path= \ + -a opensbi-path= \ + -a default-dt="imx8mm-cl-iot-gate-optee" \ + -a scp-path= \ + -a rockchip-tpl-path= \ + -a spl-bss-pad= \ + -a tpl-bss-pad=1 \ + -a vpl-bss-pad=1 \ + -a spl-dtb=y \ + -a tpl-dtb= \ + -a vpl-dtb= \ + -a pre-load-key-path= \ + -a of-spl-remove-props="interrupt-parent interrupts" \ + ) + +# Copy the flash image. +cp -v "$UBOOT_DIR/flash.bin" "$BINARIES_DIR/" + +# Verify that it will fit in the eMMC boot partition. +size=$(du -b "$BINARIES_DIR/flash.bin" |cut -f 1) + +if [ "$size" -gt 4160512 ]; then + echo "Flash image is too big! (${size} bytes)" >&2 + exit 1 +fi diff --git a/board/compulab/iot-gate-imx8-ebbr/readme.txt b/board/compulab/iot-gate-imx8-ebbr/readme.txt new file mode 100644 index 00000000000..2b6183e13f2 --- /dev/null +++ b/board/compulab/iot-gate-imx8-ebbr/readme.txt @@ -0,0 +1,131 @@ +Introduction +============ + +The iot-gate-imx8_ebbr_defconfig is meant to illustrate some aspects of the Arm +EBBR specification[1] and the Arm SystemReady Devicetree band[2]. +It allows building an AArch64 disk image with a U-Boot based firmware +implementing the subset of UEFI defined by EBBR, as well as a Linux OS booting +with UEFI, to run on the Compulab IOT-GATE-iMX8. [3] + +This configuration is not related with the official BSP from Compulab. [4] + +Building +======== + + $ make iot-gate-imx8_ebbr_defconfig + $ make + +Generated files under output/images/: + +* disk.img: An eMMC or USB key disk image comprising TF-A, OP-TEE, the U-Boot + bootloader, the GRUB bootloader, the Linux kernel and the root filesystem. + +* flash.bin: A firmware image suitable for flashing in eMMC boot partition + comprising TF-A, OP-TEE and the U-Boot bootloader. + +Running +======= + +Before flashing the firmware to eMMC, make sure that you have the IOTG-ACC-M2SD +M.2 to SD adapter for recovery and prepare a recovery SD card. [5] +Insert the SD card and the M.2 adapter. + +Prepare a USB key on a PC: + + # dd if=output/images/disk.img of= ; sync + +Insert the USB key, close jumper E1 on the board to select recovery boot, +connect to the UART console on the micro USB connector (a Silicon Labs CP2104 +UART bridge) with baudrate 115200, power on the board and break to U-Boot +prompt. + +Flash the firmware from the USB key to the eMMC boot partition: + + u-boot=> usb start + u-boot=> usb dev 0 + u-boot=> usb read ${loadaddr} 0x42 0x1fbe + u-boot=> mmc dev 2 1 + u-boot=> mmc write ${loadaddr} 0x42 0x1fbe + u-boot=> mmc partconf 2 0 1 0 + +Power off the board, remove jumper E1 and the M.2 SD card adapter, then restart +the board; it should boot to Linux, with the root filesystem on the USB key. + +Other setups are also possible, with the firmware and/or the root filesystem in +the eMMC user data. The firmware binary is also available as flash.bin for +convenience, to allow network download for example. + +With the firmware in the eMMC boot partition, it is possible to install or run +another OS supporting the EBBR specification. + +The image generated by the aarch64_efi_defconfig, the images from Linux +distributions such as Debian, Fedora, openSUSE, Ubuntu, OpenWrt and Yocto, and +the Arm ACS Devicetree images[6] are examples of compatible OS images. + +When installing other OSes to eMMC, it is recommended to protect the first 32KB +of the user data with a partition, as this is where the U-Boot environment can +be saved. + +Firmware details +================ + +Noteworthy firmware features: + +- TF-A, OP-TEE & U-Boot +- UEFI, with EFI variables stored on disk in the ESP +- Support for ethernet, USB and RTC +- U-Boot environment in eMMC user data (starting from byte 0x4400) + +Architecture diagram: + + Non-Secure : Secure + : + +---------------------------+ : + EL0 | Busybox | : + +---------------------------+ : +--------+ + EL1 | Linux | : | OP-TEE | S-EL1 + +---------------------------+ : +--------+ + EL2 | U-Boot, GRUB, Linux (kvm) | : + +---------------------------+ : + ...................................: + +----------------------------------------+ + | ROM, U-Boot SPL, TF-A | EL3 + +----------------------------------------+ + +Boot flow: + + ROM -+-> SPL -> TF-A -+-> OP-TEE + `-> U-Boot -> GRUB -> Linux -> Busybox + +The ROM loads U-Boot SPL. +U-Boot SPL does the DRAM setup, loads the fit image with TF-A, OP-TEE, U-Boot +and the Devicetree. +In this configuration TF-A is booting with BL2 and BL31. +OP-TEE amends the Devicetree, calls back TF-A to go to normal world. +U-Boot loads GRUB with UEFI, boots Linux at EL2. + +Miscellaneous +============= + +This configuration is based on the work of Paul Liu[7] and is inspired by the +other configurations related with EBBR, and the Arm SystemReady Devicetree Band +Integration and Testing Guide[8]. + +To avoid a circular build dependency, we skip the binman step during U-Boot +build: + + BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="cmd_binman=:" + +Then we run binman manually in the post-image script. + +Firmware update and UEFI Secure Boot are currently not supported. +The disk image cannot be used for SD card recovery at this point. + +[1] https://github.com/ARM-software/ebbr +[2] https://www.arm.com/architecture/system-architectures/systemready-compliance-program/systemready-devicetree-band +[3] https://www.compulab.com/products/iot-gateways/iot-gate-imx8-industrial-arm-iot-gateway/ +[4] https://mediawiki.compulab.com/w/index.php?title=Building_IOT-GATE-iMX8_and_SBC-IOT-iMX8_Yocto_Linux_images +[5] https://mediawiki.compulab.com/w/index.php?title=IOT-GATE-iMX8_and_SBC-IOT-iMX8:_U-Boot:_Recovery +[6] https://github.com/ARM-software/arm-systemready/tree/main/SystemReady-devicetree-band/prebuilt_images +[7] https://git.linaro.org/plugins/gitiles/people/paul.liu/systemready/build-scripts +[8] https://developer.arm.com/documentation/DUI1101/latest/ diff --git a/board/compulab/iot-gate-imx8-ebbr/u-boot.fragment b/board/compulab/iot-gate-imx8-ebbr/u-boot.fragment new file mode 100644 index 00000000000..d72664dc5c8 --- /dev/null +++ b/board/compulab/iot-gate-imx8-ebbr/u-boot.fragment @@ -0,0 +1,6 @@ +CONFIG_ARCH_MISC_INIT=y +CONFIG_CMD_RNG=y +CONFIG_DM_REGULATOR_ANATOP=y +CONFIG_DM_RNG=y +CONFIG_FSL_CAAM=y +CONFIG_PHY_ANEG_TIMEOUT=5000 diff --git a/board/cubietech/cubieboard1/patches/linux/linux.hash b/board/cubietech/cubieboard1/patches/linux/linux.hash index 1213da86b17..cd7c9607f28 100644 --- a/board/cubietech/cubieboard1/patches/linux/linux.hash +++ b/board/cubietech/cubieboard1/patches/linux/linux.hash @@ -1,2 +1,2 @@ -# Locally calculated -sha256 643142c1b5991560dd12f950825cc19e4497b95b82641918ecff1177f4130c1d linux-6.12.24.tar.xz +# From https://www.kernel.org/pub/linux/kernel/v7.x/sha256sums.asc +sha256 be41c068e88f5242a19bccdbffbe077b18c47b45f627e2325504b4fab79dd1dc linux-7.1.3.tar.xz diff --git a/board/cubietech/cubieboard1/patches/uboot/uboot.hash b/board/cubietech/cubieboard1/patches/uboot/uboot.hash index 80ea21b7cb4..ff6e4ed2e2f 100644 --- a/board/cubietech/cubieboard1/patches/uboot/uboot.hash +++ b/board/cubietech/cubieboard1/patches/uboot/uboot.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 439d3bef296effd54130be6a731c5b118be7fddd7fcc663ccbc5fb18294d8718 u-boot-2025.04.tar.bz2 +sha256 78e8bfc382fe388f9b55aa1daf8c563522a037779b5d4c349d1415e381f1243e u-boot-2026.07.tar.bz2 diff --git a/board/cubietech/cubieboard2/patches/linux/linux.hash b/board/cubietech/cubieboard2/patches/linux/linux.hash index 1213da86b17..cd7c9607f28 100644 --- a/board/cubietech/cubieboard2/patches/linux/linux.hash +++ b/board/cubietech/cubieboard2/patches/linux/linux.hash @@ -1,2 +1,2 @@ -# Locally calculated -sha256 643142c1b5991560dd12f950825cc19e4497b95b82641918ecff1177f4130c1d linux-6.12.24.tar.xz +# From https://www.kernel.org/pub/linux/kernel/v7.x/sha256sums.asc +sha256 be41c068e88f5242a19bccdbffbe077b18c47b45f627e2325504b4fab79dd1dc linux-7.1.3.tar.xz diff --git a/board/cubietech/cubieboard2/patches/uboot/uboot.hash b/board/cubietech/cubieboard2/patches/uboot/uboot.hash index 80ea21b7cb4..ff6e4ed2e2f 100644 --- a/board/cubietech/cubieboard2/patches/uboot/uboot.hash +++ b/board/cubietech/cubieboard2/patches/uboot/uboot.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 439d3bef296effd54130be6a731c5b118be7fddd7fcc663ccbc5fb18294d8718 u-boot-2025.04.tar.bz2 +sha256 78e8bfc382fe388f9b55aa1daf8c563522a037779b5d4c349d1415e381f1243e u-boot-2026.07.tar.bz2 diff --git a/board/engicam/geam6ul/genimage.cfg b/board/engicam/geam6ul/genimage.cfg deleted file mode 100644 index 3d290b2ea60..00000000000 --- a/board/engicam/geam6ul/genimage.cfg +++ /dev/null @@ -1,39 +0,0 @@ -image boot.vfat { - vfat { - files = { - "uImage", - "imx6ul-geam-kit.dtb" - } - } - - size = 64M -} - -image sdcard.img { - hdimage { - } - - partition SPL { - in-partition-table = "no" - image = "SPL" - offset = 1K - } - - partition u-boot-dtb { - in-partition-table = "no" - image = "u-boot-dtb.img" - offset = 69K - } - - partition boot { - partition-type = 0xC - bootable = "true" - image = "boot.vfat" - offset = 8M - } - - partition rootfs { - partition-type = 0x83 - image = "rootfs.ext2" - } -} diff --git a/board/engicam/geam6ul/readme.txt b/board/engicam/geam6ul/readme.txt deleted file mode 100644 index ace993a661c..00000000000 --- a/board/engicam/geam6ul/readme.txt +++ /dev/null @@ -1,66 +0,0 @@ -******************************************** -Buildroot for Engicam GEAM6UL SOM platforms: -******************************************** - -This file documents the Buildroot support for all Engicam GEAM6UL -SOM platform boards. - -GEAM6UL SOM Starter kits: -https://www.engicam.com/vis-prod/101115 - -This configuration uses U-Boot mainline and kernel mainline. - -Build -===== - -First, configure Buildroot for the Engicam GEAM6UL SOM: - -- for GEAM6UL SOM: - - make engicam_imx6ul_geam_defconfig - -Build all components: - - make - -You will find the following files in output/images/: - - imx6ul-geam-kit.dtb - - rootfs.ext4 - - rootfs.tar - - sdcard.img - - SPL - - u-boot-dtb.img - - uImage - -Create a bootable SD card -========================= - -To determine the device associated to the SD card have a look in the -/proc/partitions file: - - cat /proc/partitions - -Buildroot prepares a bootable "sdcard.img" image in the output/images/ -directory, ready to be dumped on a SD card. Launch the following -command as root: - - dd if=output/images/sdcard.img of=/dev/ - sync - -*** WARNING! This will destroy all the card content. Use with care! *** - -For details about the medium image layout, see the definition in -board/engicam/geam6ul/genimage.cfg - -Boot the GEAM6UL boards with SD boot: -==================================== - -To boot your newly created system: -- insert the SD card in the SD slot of the board; -- connect 3-wire RS232 serial port J28 on board, and connect with other - serial end or USB cable(if serial-to-usb converter used) using - a terminal emulator at 115200 bps, 8n1; -- close JM3 for sd boot. -- power on the board. - -Enjoy! diff --git a/board/engicam/icorem6/genimage.cfg b/board/engicam/icorem6/genimage.cfg deleted file mode 100644 index 985d9e5de1e..00000000000 --- a/board/engicam/icorem6/genimage.cfg +++ /dev/null @@ -1,42 +0,0 @@ -image boot.vfat { - vfat { - files = { - "uImage", - "imx6dl-icore.dtb", - "imx6q-icore.dtb", - "imx6q-icore-ofcap10.dtb", - "imx6q-icore-ofcap12.dtb" - } - } - - size = 64M -} - -image sdcard.img { - hdimage { - } - - partition SPL { - in-partition-table = "no" - image = "SPL" - offset = 1K - } - - partition u-boot-dtb { - in-partition-table = "no" - image = "u-boot-dtb.img" - offset = 69K - } - - partition boot { - partition-type = 0xC - bootable = "true" - image = "boot.vfat" - offset = 8M - } - - partition rootfs { - partition-type = 0x83 - image = "rootfs.ext2" - } -} diff --git a/board/engicam/icorem6/linux_qt5.fragment b/board/engicam/icorem6/linux_qt5.fragment deleted file mode 100644 index 5c0505e5103..00000000000 --- a/board/engicam/icorem6/linux_qt5.fragment +++ /dev/null @@ -1,4 +0,0 @@ -# Currently kernel mainline exhibits issues when running cpufreq as ondemand -# governor on mx6. -# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y diff --git a/board/engicam/icorem6/readme.txt b/board/engicam/icorem6/readme.txt deleted file mode 100644 index bd78c5a5564..00000000000 --- a/board/engicam/icorem6/readme.txt +++ /dev/null @@ -1,93 +0,0 @@ -********************************************* -Buildroot for Engicam i.CoreM6 SOM platforms: -********************************************* - -This file documents the Buildroot support for Engicam i.CoreM6 -platform boards. - -i.CoreM6 Quad/Dual/DualLite/Solo SOM Starter kits: -https://www.engicam.com/vis-prod/101120 -i.CoreM6 Quad/Dual/DualLite/Solo Open Frame 10.1 C.TOUCH kits: -https://www.engicam.com/vis-prod/101133 - -This configuration uses U-Boot mainline and kernel mainline. - -Build -===== - -First, configure Buildroot for the Engicam i.CoreM6: - - make engicam_imx6qdl_icore_defconfig - -Build all components: - - make - -You will find the following files in output/images/: - - imx6q-icore.dtb (for i.CoreM6 Quad/Dual) - - imx6dl-icore.dtb (for i.CoreM6 DualLite/Solo) - - imx6q-icore-ofcap10.dtb (for i.CoreM6 Quad/Dual ofcap 10) - - imx6q-icore-ofcap12.dtb (for i.CoreM6 Quad/Dual ofcap 12) - - rootfs.ext4 - - rootfs.tar - - sdcard.img - - SPL - - u-boot-dtb.img - - uImage - -Create a bootable SD card -========================= - -To determine the device associated to the SD card have a look in the -/proc/partitions file: - - cat /proc/partitions - -Buildroot prepares a bootable "sdcard.img" image in the output/images/ -directory, ready to be dumped on a SD card. Launch the following -command as root: - - dd if=output/images/sdcard.img of=/dev/ - sync - -*** WARNING! This will destroy all the card content. Use with care! *** - -For details about the medium image layout, see the definition in -board/engicam/icorem6/genimage.cfg - -Boot the i.CoreM6 boards with SD boot: -===================================== - -To boot your newly created system: -- insert the SD card in the SD slot of the board; -- connect 3-wire RS232 serial port J28 on board, and connect with other - serial end or USB cable(if serial-to-usb converter used) using - a terminal emulator at 115200 bps, 8n1; -- close JM3 for sd boot. -- power on the board. - -Testing graphics on i.CoreM6: -============================ - -Build with support for Etnaviv, Qt5 and demo applications: - - make engicam_imx6qdl_icore_qt5_defconfig - make - -Running kmscube -# kmscube -D /dev/dri/card1 - -Running glmark2-es2-drm -# glmark2-es2-drm - -Running Qt5 Cinematic Demo: -- for i.CoreM6 Starter Kit -# export QT_QPA_EGLFS_KMS_CONFIG=/root/imx6qdl-icore.json -- for i.CoreM6 ofcap10 -# export QT_QPA_EGLFS_KMS_CONFIG=/root/imx6qdl-icore-ofcap10.json -- for i.CoreM6 ofcap12 -# export QT_QPA_EGLFS_KMS_CONFIG=/root/imx6qdl-icore-ofcap12.json - -# CinematicExperience-demo - -Enjoy! diff --git a/board/engicam/icorem6/rootfs_overlay/root/imx6qdl-icore-ofcap10.json b/board/engicam/icorem6/rootfs_overlay/root/imx6qdl-icore-ofcap10.json deleted file mode 100644 index 3bfe4a23623..00000000000 --- a/board/engicam/icorem6/rootfs_overlay/root/imx6qdl-icore-ofcap10.json +++ /dev/null @@ -1,11 +0,0 @@ -{ - "device": "/dev/dri/card1", - "hwcursor": false, - "pbuffers": true, - "outputs": [ - { - "name": "LVDS1", - "mode": "1280x800" - } - ] -} diff --git a/board/engicam/icorem6/rootfs_overlay/root/imx6qdl-icore-ofcap12.json b/board/engicam/icorem6/rootfs_overlay/root/imx6qdl-icore-ofcap12.json deleted file mode 100644 index ea5ce6f97a3..00000000000 --- a/board/engicam/icorem6/rootfs_overlay/root/imx6qdl-icore-ofcap12.json +++ /dev/null @@ -1,11 +0,0 @@ -{ - "device": "/dev/dri/card1", - "hwcursor": false, - "pbuffers": true, - "outputs": [ - { - "name": "LVDS1", - "mode": "1280x480" - } - ] -} diff --git a/board/engicam/icorem6/rootfs_overlay/root/imx6qdl-icore.json b/board/engicam/icorem6/rootfs_overlay/root/imx6qdl-icore.json deleted file mode 100644 index b4fa359b64a..00000000000 --- a/board/engicam/icorem6/rootfs_overlay/root/imx6qdl-icore.json +++ /dev/null @@ -1,11 +0,0 @@ -{ - "device": "/dev/dri/card1", - "hwcursor": false, - "pbuffers": true, - "outputs": [ - { - "name": "LVDS1", - "mode": "800x480" - } - ] -} diff --git a/board/engicam/icorem6_rqs/genimage.cfg b/board/engicam/icorem6_rqs/genimage.cfg deleted file mode 100644 index d6936f8109d..00000000000 --- a/board/engicam/icorem6_rqs/genimage.cfg +++ /dev/null @@ -1,40 +0,0 @@ -image boot.vfat { - vfat { - files = { - "uImage", - "imx6dl-icore-rqs.dtb", - "imx6q-icore-rqs.dtb" - } - } - - size = 64M -} - -image sdcard.img { - hdimage { - } - - partition SPL { - in-partition-table = "no" - image = "SPL" - offset = 1K - } - - partition u-boot-dtb { - in-partition-table = "no" - image = "u-boot-dtb.img" - offset = 69K - } - - partition boot { - partition-type = 0xC - bootable = "true" - image = "boot.vfat" - offset = 8M - } - - partition rootfs { - partition-type = 0x83 - image = "rootfs.ext2" - } -} diff --git a/board/engicam/icorem6_rqs/readme.txt b/board/engicam/icorem6_rqs/readme.txt deleted file mode 100644 index a0bf6f508f3..00000000000 --- a/board/engicam/icorem6_rqs/readme.txt +++ /dev/null @@ -1,69 +0,0 @@ -************************************************* -Buildroot for Engicam i.CoreM6 RQS SOM platforms: -************************************************* - -This file documents the Buildroot support for Engicam i.CoreM6 RQS -SOM platform boards. - -i.CoreM6 Quad/Dual/DualLite/Solo RQS SOM Starter kits: -https://www.engicam.com/vis-prod/101124 - -This configuration uses U-Boot mainline and kernel mainline. - -Build -===== - -First, configure Buildroot for the Engicam i.CoreM6 RQS: - -- for i.CoreM6 RQS Quad/Dual/DualLite/Solo: - - make engicam_imx6qdl_icore_rqs_defconfig - -Build all components: - - make - -You will find the following files in output/images/: -- for i.CoreM6 Quad/Dual RQS: - - imx6q-icore-rqs.dtb -- for i.CoreM6 DualLite/Solo RQS: - - imx6dl-icore-rqs.dtb - - rootfs.ext4 - - rootfs.tar - - sdcard.img - - SPL - - u-boot-dtb.img - - uImage - -Create a bootable SD card -========================= - -To determine the device associated to the SD card have a look in the -/proc/partitions file: - - cat /proc/partitions - -Buildroot prepares a bootable "sdcard.img" image in the output/images/ -directory, ready to be dumped on a SD card. Launch the following -command as root: - - dd if=output/images/sdcard.img of=/dev/ - sync - -*** WARNING! This will destroy all the card content. Use with care! *** - -For details about the medium image layout, see the definition in -board/engicam/icorem6_rqs/genimage.cfg - -Boot the i.CoreM6 RQS boards with SD boot: -========================================= - -To boot your newly created system: -- insert the SD card in the SD slot of the board; -- connect 3-wire RS232 serial port J7 on board, and connect with other - serial end or USB cable(if serial-to-usb converter used) using - a terminal emulator at 115200 bps, 8n1; -- close JM2 for sd boot. -- power on the board. - -Enjoy! diff --git a/board/engicam/isiot/genimage.cfg b/board/engicam/isiot/genimage.cfg deleted file mode 100644 index 4e65a70110b..00000000000 --- a/board/engicam/isiot/genimage.cfg +++ /dev/null @@ -1,39 +0,0 @@ -image boot.vfat { - vfat { - files = { - "uImage", - "imx6ul-isiot-emmc.dtb" - } - } - - size = 64M -} - -image sdcard.img { - hdimage { - } - - partition SPL { - in-partition-table = "no" - image = "SPL" - offset = 1K - } - - partition u-boot-dtb { - in-partition-table = "no" - image = "u-boot-dtb.img" - offset = 69K - } - - partition boot { - partition-type = 0xC - bootable = "true" - image = "boot.vfat" - offset = 8M - } - - partition rootfs { - partition-type = 0x83 - image = "rootfs.ext2" - } -} diff --git a/board/engicam/isiot/readme.txt b/board/engicam/isiot/readme.txt deleted file mode 100644 index 5394007ca51..00000000000 --- a/board/engicam/isiot/readme.txt +++ /dev/null @@ -1,66 +0,0 @@ -******************************************** -Buildroot for Engicam Is.IoT SOM platforms: -******************************************** - -This file documents the Buildroot support for all Engicam Is.IoT MX6UL -SOM platform boards. - -Is.IoT MX6UL SOM Starter kits: -https://www.engicam.com/vis-prod/101122 - -This configuration uses U-Boot mainline and kernel mainline. - -Build -===== - -First, configure Buildroot for the Engicam Is.IoT MX6UL SOM: - -- for Is.IoT MX6UL SOM: - - make engicam_imx6ul_isiot_defconfig - -Build all components: - - make - -You will find the following files in output/images/: - - imx6ul-isiot-emmc.dtb - - rootfs.ext4 - - rootfs.tar - - sdcard.img - - SPL - - u-boot-dtb.img - - uImage - -Create a bootable SD card -========================= - -To determine the device associated to the SD card have a look in the -/proc/partitions file: - - cat /proc/partitions - -Buildroot prepares a bootable "sdcard.img" image in the output/images/ -directory, ready to be dumped on a SD card. Launch the following -command as root: - - dd if=output/images/sdcard.img of=/dev/ - sync - -*** WARNING! This will destroy all the card content. Use with care! *** - -For details about the medium image layout, see the definition in -board/engicam/isiot/genimage.cfg - -Boot the Is.IoT MX6UL boards with SD boot: -========================================= - -To boot your newly created system: -- insert the SD card in the SD slot of the board; -- connect 3-wire RS232 serial port J28 on board, and connect with other - serial end or USB cable(if serial-to-usb converter used) using - a terminal emulator at 115200 bps, 8n1; -- close JM3 for sd boot. -- power on the board. - -Enjoy! diff --git a/board/firefly/roc-rk3399-pc/patches/arm-trusted-firmware/arm-trusted-firmware.hash b/board/firefly/roc-rk3399-pc/patches/arm-trusted-firmware/arm-trusted-firmware.hash index 8b77e1f1653..0bf70b55422 100644 --- a/board/firefly/roc-rk3399-pc/patches/arm-trusted-firmware/arm-trusted-firmware.hash +++ b/board/firefly/roc-rk3399-pc/patches/arm-trusted-firmware/arm-trusted-firmware.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 c0f23ccc71c49989e9ad238acf334473c17b7c88f79a20c829c3d443e3794a22 arm-trusted-firmware-v2.11-git4.tar.gz +sha256 6fd749e53c455aec3418288630544e7552bbffab4442ddc48b20ebef9aee87ff arm-trusted-firmware-v2.14-git4.tar.gz diff --git a/board/firefly/roc-rk3399-pc/patches/linux/linux.hash b/board/firefly/roc-rk3399-pc/patches/linux/linux.hash index 98edd13a581..be62c295011 100644 --- a/board/firefly/roc-rk3399-pc/patches/linux/linux.hash +++ b/board/firefly/roc-rk3399-pc/patches/linux/linux.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 f74812f78e88992c416434cb107639e13a551dbaff36bb90d6346ab16ab71a95 linux-6.6.56.tar.xz +sha256 f4855f382c1b735c84072bdef36db5bcd5dc7b0c37e42f5104317149a0a486ef linux-6.18.18.tar.xz diff --git a/board/firefly/roc-rk3399-pc/patches/uboot/uboot.hash b/board/firefly/roc-rk3399-pc/patches/uboot/uboot.hash index fe9b4f53dc6..b6a925ea4e8 100644 --- a/board/firefly/roc-rk3399-pc/patches/uboot/uboot.hash +++ b/board/firefly/roc-rk3399-pc/patches/uboot/uboot.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 f591da9ab90ef3d6b3d173766d0ddff90c4ed7330680897486117df390d83c8f u-boot-2024.07.tar.bz2 +sha256 b60d5865cefdbc75da8da4156c56c458e00de75a49b80c1a2e58a96e30ad0d54 u-boot-2026.01.tar.bz2 diff --git a/board/freescale/common/imx/genimage.cfg.template_imx9 b/board/freescale/common/imx/genimage.cfg.template_imx9 index df7ddc25b73..227cc144314 100644 --- a/board/freescale/common/imx/genimage.cfg.template_imx9 +++ b/board/freescale/common/imx/genimage.cfg.template_imx9 @@ -2,7 +2,7 @@ # # We mimic the .sdcard NXP's image format: # * the SD card must have 32 kB free space at the beginning, -# * U-Boot is integrated into imx9-boot-sd.bin and is dumped as is, +# * U-Boot is integrated into flash.bin and is dumped as is, # * a FAT partition at offset 8MB is containing Image and DTB files # * a single root filesystem partition is required (ext2, ext3 or ext4) # @@ -24,7 +24,7 @@ image sdcard.img { partition imx-boot { in-partition-table = "no" - image = "imx9-boot-sd.bin" + image = "flash.bin" offset = %IMXOFFSET% } diff --git a/board/freescale/common/imx/imx9-bootloader-prepare.sh b/board/freescale/common/imx/imx9-bootloader-prepare.sh index 2db887a7859..ff5910bbf76 100755 --- a/board/freescale/common/imx/imx9-bootloader-prepare.sh +++ b/board/freescale/common/imx/imx9-bootloader-prepare.sh @@ -20,7 +20,7 @@ main () "${HOST_DIR}/bin/mkimage_imx8" -soc IMX9 -c \ -ap "${BINARIES_DIR}/bl31.bin" a55 ${ATF_LOAD_ADDR} \ -ap "${BINARIES_DIR}/u-boot-hash.bin" a55 0x80200000 \ - -ap "${BINARIES_DIR}/tee.bin" a55 0x96000000 \ + -ap "${BINARIES_DIR}/tee-raw.bin" a55 0x96000000 \ -out "${BINARIES_DIR}/u-boot-atf-container.img" else "${HOST_DIR}/bin/mkimage_imx8" -soc IMX9 -c \ @@ -31,11 +31,11 @@ main () "${HOST_DIR}/bin/mkimage_imx8" -soc IMX9 -append "${BINARIES_DIR}/ahab-container.img" -c \ -ap "${BINARIES_DIR}/u-boot-spl-ddr.bin" a55 ${SPL_LOAD_ADDR} \ - -out "${BINARIES_DIR}/imx9-boot-sd.bin" + -out "${BINARIES_DIR}/flash.bin" - flashbin_size="$(wc -c "${BINARIES_DIR}/imx9-boot-sd.bin" | awk '{print $1}')" + flashbin_size="$(wc -c "${BINARIES_DIR}/flash.bin" | awk '{print $1}')" pad_cnt=$(($((flashbin_size + 0x400 - 1)) / 0x400)) - dd if="${BINARIES_DIR}/u-boot-atf-container.img" of="${BINARIES_DIR}/imx9-boot-sd.bin" bs=1K seek=${pad_cnt} + dd if="${BINARIES_DIR}/u-boot-atf-container.img" of="${BINARIES_DIR}/flash.bin" bs=1K seek=${pad_cnt} exit $? } diff --git a/board/freescale/imx6ull-evk/linux_sdma.fragment b/board/freescale/imx6ull-evk/linux_sdma.fragment new file mode 100644 index 00000000000..6f1c8b4313c --- /dev/null +++ b/board/freescale/imx6ull-evk/linux_sdma.fragment @@ -0,0 +1 @@ +CONFIG_IMX_SDMA=m diff --git a/board/cubietech/cubieboard1/patches/linux-headers/linux-headers.hash b/board/freescale/imx6ull-evk/patches/linux-headers/linux-headers.hash similarity index 100% rename from board/cubietech/cubieboard1/patches/linux-headers/linux-headers.hash rename to board/freescale/imx6ull-evk/patches/linux-headers/linux-headers.hash diff --git a/board/freescale/imx6ull-evk/patches/linux/linux.hash b/board/freescale/imx6ull-evk/patches/linux/linux.hash new file mode 100644 index 00000000000..b1a0042a91a --- /dev/null +++ b/board/freescale/imx6ull-evk/patches/linux/linux.hash @@ -0,0 +1,2 @@ +# Locally calculated +sha256 37f0c5d5c242c1d604e87d48f08795e861a5a85f725b4ca11d0a538f12ff8cff linux-6.18.8.tar.xz diff --git a/board/freescale/imx6ull-evk/patches/uboot/uboot.hash b/board/freescale/imx6ull-evk/patches/uboot/uboot.hash new file mode 100644 index 00000000000..b6a925ea4e8 --- /dev/null +++ b/board/freescale/imx6ull-evk/patches/uboot/uboot.hash @@ -0,0 +1,2 @@ +# Locally calculated +sha256 b60d5865cefdbc75da8da4156c56c458e00de75a49b80c1a2e58a96e30ad0d54 u-boot-2026.01.tar.bz2 diff --git a/board/freescale/imx6ull-evk/readme.txt b/board/freescale/imx6ull-evk/readme.txt new file mode 100644 index 00000000000..8203a120268 --- /dev/null +++ b/board/freescale/imx6ull-evk/readme.txt @@ -0,0 +1,64 @@ +**************************** +Freescale i.MX6ULL EVK board +**************************** + +This file documents the Buildroot support for the Freescale i.MX6ULL EVK board +using Upstream U-Boot and Linux. + +Build +===== + +First, configure Buildroot for your i.MX6ULL EVK board: + +In order to do so issue: + + make imx6ullevk_defconfig + +Build all components: + + make + +You will find in output/images/ the following files: + - boot.vfat + - imx6ull-14x14-evk.dtb + - rootfs.ext2 + - rootfs.ext4 + - rootfs.tar + - sdcard.img + - u-boot.bin + - u-boot-dtb.imx + - zImage + +Create a bootable SD card +========================= + +To determine the device associated to the SD card have a look in the +/proc/partitions file: + + cat /proc/partitions + +Buildroot prepares a bootable "sdcard.img" image in the output/images/ +directory, ready to be dumped on a SD card. Launch the following +command as root: + + dd if=./output/images/sdcard.img of=/dev/ + +*** WARNING! This will destroy all the card content. Use with care! *** + +For details about the medium image layout, see the definition in +board/freescale/common/imx/genimage.cfg.template. + +Boot the i.MX6ULL EVK board +=========================== + +To boot your newly created system (refer to the i.MX 6ULL EVK Quick Start Guide [1] for guidance): +- insert the SD card in the micro SD slot of the board; +- put a micro USB cable into the Debug USB Port and connect using a terminal + emulator at 115200 bps, 8n1; +- power on the board. + +Enjoy! + +References +========== +[1] https://www.nxp.com/webapp/Download?colCode=IMX6ULLQSG diff --git a/board/freescale/imx6ullevk/patches/linux/linux.hash b/board/freescale/imx6ullevk/patches/linux/linux.hash index b4f534dcc8d..b138642633a 100644 --- a/board/freescale/imx6ullevk/patches/linux/linux.hash +++ b/board/freescale/imx6ullevk/patches/linux/linux.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 4c1147a9bbe4bf36fbcbd8b1e6b0d73ec0da3c454821c58a61d32d3879afc146 linux-imx-lf-6.12.3-1.0.0.tar.gz +sha256 2166d92e5631ee11bd249d492a1f4009c7635ee36b835fa55384b4ce41e8a63f linux-imx-lf-6.12.49-2.2.0.tar.gz diff --git a/board/freescale/imx6ullevk/patches/uboot/uboot.hash b/board/freescale/imx6ullevk/patches/uboot/uboot.hash index 309a684c2d6..5d57adfa22b 100644 --- a/board/freescale/imx6ullevk/patches/uboot/uboot.hash +++ b/board/freescale/imx6ullevk/patches/uboot/uboot.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 18a32d6c79538e4f90746674873b196f9c48be24caef0ab5c1bec920a1816825 uboot-imx-lf-6.12.3-1.0.0.tar.gz +sha256 212ea4d8d442153ab732ab724282fef64450e9dab5cfe9565eec4f618e305a80 uboot-imx-lf-6.12.49-2.2.0.tar.gz diff --git a/board/freescale/imx6ullevk/readme.txt b/board/freescale/imx6ullevk/readme.txt index dc7c5f3678f..80db3a46ca6 100644 --- a/board/freescale/imx6ullevk/readme.txt +++ b/board/freescale/imx6ullevk/readme.txt @@ -2,25 +2,18 @@ Freescale i.MX6ULL EVK board **************************** -This file documents the Buildroot support for the Freescale i.MX6ULL EVK board. +This file documents the Buildroot support for the Freescale i.MX6ULL EVK board +using Vendor U-Boot and Linux. Build ===== First, configure Buildroot for your i.MX6ULL EVK board: -In order to do so there are two supported options: +In order to do so issue: make freescale_imx6ullevk_defconfig -if you plan to use NXP provided U-Boot and kernel. - -or - - make imx6ullevk_defconfig - -if you plan to use mainline U-Boot and mainline kernel. - Build all components: make diff --git a/board/freescale/imx91evk/readme.txt b/board/freescale/imx91evk/readme.txt index 42c9f41fa2c..9a0bbb7be3f 100644 --- a/board/freescale/imx91evk/readme.txt +++ b/board/freescale/imx91evk/readme.txt @@ -22,9 +22,9 @@ You will find in output/images/ the following files: - bl31.bin - boot.vfat - ddr_fw.bin + - flash.bin - Image - imx91-11x11-evk.dtb - - imx9-boot-sd.bin - lpddr4_pmu_train_fw.bin - rootfs.ext2 - rootfs.ext4 diff --git a/board/freescale/imx91frdm/patches/arm-trusted-firmware/arm-trusted-firmware.hash b/board/freescale/imx91frdm/patches/arm-trusted-firmware/arm-trusted-firmware.hash index 7561385cb86..bf39f1e9c7f 100644 --- a/board/freescale/imx91frdm/patches/arm-trusted-firmware/arm-trusted-firmware.hash +++ b/board/freescale/imx91frdm/patches/arm-trusted-firmware/arm-trusted-firmware.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 8cfe0afc903ebbc03f27e4874aa9ce82be78843a8b42ed4c906871e7f311b510 imx-atf-lf-6.6.36-2.1.0.tar.gz +sha256 d7813f4ad5431edb162d6be2775bc021f9007b9c6934e977330291168523a507 imx-atf-lf-6.18.20-2.0.0.tar.gz diff --git a/board/freescale/imx91frdm/patches/linux/linux.hash b/board/freescale/imx91frdm/patches/linux/linux.hash index f03ffd5b557..222ec55328d 100644 --- a/board/freescale/imx91frdm/patches/linux/linux.hash +++ b/board/freescale/imx91frdm/patches/linux/linux.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 3f5017e85ba6c490be597670033a7eaba14e3c34af4e53d24dc3762c3deece83 linux-imx-lf-6.6.36-2.1.0-imx91frdm.tar.gz +sha256 a8f55764fd1418db8adfd2711c0abb7d5464a8ee1cbfd0f6878f1059ecfa1316 linux-imx-lf-6.18.20-2.0.0.tar.gz diff --git a/board/freescale/imx91frdm/patches/uboot/uboot.hash b/board/freescale/imx91frdm/patches/uboot/uboot.hash index f285dff4902..01e860b59ea 100644 --- a/board/freescale/imx91frdm/patches/uboot/uboot.hash +++ b/board/freescale/imx91frdm/patches/uboot/uboot.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 f7d9a6e99825926d0bc597e0fdfeafffcc76ad6267f1d4e9aae1fe9a8d400c22 uboot-imx-lf-6.6.36-2.1.0-imx91frdm.tar.gz +sha256 96942f8c49736b7d40277891bf0a34cfdd0afb59390f79b65b2b33b3bbd19f61 uboot-imx-lf-6.18.20-2.0.0.tar.gz diff --git a/board/freescale/imx91frdm/uboot.fragment b/board/freescale/imx91frdm/uboot.fragment new file mode 100644 index 00000000000..201ab282904 --- /dev/null +++ b/board/freescale/imx91frdm/uboot.fragment @@ -0,0 +1 @@ +# CONFIG_EFI_CAPSULE_AUTHENTICATE is not set diff --git a/board/freescale/imx93evk/patches/optee-os/optee-os.hash b/board/freescale/imx93evk/patches/optee-os/optee-os.hash new file mode 100644 index 00000000000..6ab7c41aa16 --- /dev/null +++ b/board/freescale/imx93evk/patches/optee-os/optee-os.hash @@ -0,0 +1,2 @@ +# Locally calculated +sha256 4b685080a094cb0f0489b8114ae8b73c37ec13eda9f5618c8b6311ff1f472f57 imx-optee-os-lf-6.12.3-1.0.0.tar.gz diff --git a/board/freescale/imx93evk/readme.txt b/board/freescale/imx93evk/readme.txt index 1173de39dbb..9978bee684c 100644 --- a/board/freescale/imx93evk/readme.txt +++ b/board/freescale/imx93evk/readme.txt @@ -20,9 +20,9 @@ You will find in output/images/ the following files: - bl31.bin - boot.vfat - ddr_fw.bin + - flash.bin - Image - imx93-11x11-evk.dtb - - imx9-boot-sd.bin - lpddr4_pmu_train_fw.bin - rootfs.ext2 - rootfs.ext4 diff --git a/board/freescale/imx93frdm/patches/arm-trusted-firmware/arm-trusted-firmware.hash b/board/freescale/imx93frdm/patches/arm-trusted-firmware/arm-trusted-firmware.hash index 7561385cb86..92b3645fb76 100644 --- a/board/freescale/imx93frdm/patches/arm-trusted-firmware/arm-trusted-firmware.hash +++ b/board/freescale/imx93frdm/patches/arm-trusted-firmware/arm-trusted-firmware.hash @@ -1,2 +1,3 @@ # Locally calculated -sha256 8cfe0afc903ebbc03f27e4874aa9ce82be78843a8b42ed4c906871e7f311b510 imx-atf-lf-6.6.36-2.1.0.tar.gz +sha256 c7b92f0da1a154ebabd4425a1627a726d8e0206e8b417d8c87b5a9636b52a3e5 imx-atf-lf-6.18.37-2.1.0.tar.gz +sha256 b807d8bf190b7c46b4260729b4bbe2f7df83cd1086edcb181d66595ae6598d23 arm-trusted-firmware-v2.15.0-git4.tar.gz diff --git a/board/freescale/imx93frdm/patches/linux/linux.hash b/board/freescale/imx93frdm/patches/linux/linux.hash index 0da8c03384b..b6cbf6be1f6 100644 --- a/board/freescale/imx93frdm/patches/linux/linux.hash +++ b/board/freescale/imx93frdm/patches/linux/linux.hash @@ -1,2 +1,4 @@ # Locally calculated -sha256 3244dc3c62c990d9de90e1c7193aa3099e0e74e720de5c9c13edfbfdd802f596 linux-imx-lf-6.6.36-2.1.0-imx93frdm.tar.gz +sha256 352273c5098d73762074997a89537f06994d6a1c2e9d291dd8431dfe4fa0be27 linux-imx-lf-6.18.37-2.1.0.tar.gz +# From https://www.kernel.org/pub/linux/kernel/v7.x/sha256sums.asc +sha256 87363c24f10e06321eb362765521094e94471f6bff8bce2d6b3e40f39f004953 linux-7.3.tar.xz diff --git a/board/freescale/imx93frdm/patches/uboot/uboot.hash b/board/freescale/imx93frdm/patches/uboot/uboot.hash index e512c27f7d2..b6058cb3c04 100644 --- a/board/freescale/imx93frdm/patches/uboot/uboot.hash +++ b/board/freescale/imx93frdm/patches/uboot/uboot.hash @@ -1,2 +1,3 @@ # Locally calculated -sha256 bced4334363199d5465532d221d06dc3a5b49271067d74408019c825ed2ca715 uboot-imx-lf-6.6.36-2.1.0-imx93frdm.tar.gz +sha256 b9aa6a73f670f02a0903e3298923c3aa802ba3ffb7a53f6c397d28998c3ee8d8 uboot-imx-lf-6.18.37-2.1.0.tar.gz +sha256 3f856da3cbbc93af51ff95fde18588a348b4a26723b01d9841e999d988481015 u-boot-2026.10.tar.bz2 diff --git a/board/freescale/imx93frdm/readme.txt b/board/freescale/imx93frdm/readme.txt index 3e5f4040290..81e46658ba4 100644 --- a/board/freescale/imx93frdm/readme.txt +++ b/board/freescale/imx93frdm/readme.txt @@ -11,7 +11,9 @@ Build First, configure Buildroot for the i.MX 93 FRDM board: - make freescale_imx93frdm_defconfig + make imx93frdm_defconfig (mainline) +Or: + make freescale_imx93frdm_defconfig (vendor BSP) Build all components: diff --git a/board/freescale/imx93frdm/uboot.fragment b/board/freescale/imx93frdm/uboot.fragment new file mode 100644 index 00000000000..201ab282904 --- /dev/null +++ b/board/freescale/imx93frdm/uboot.fragment @@ -0,0 +1 @@ +# CONFIG_EFI_CAPSULE_AUTHENTICATE is not set diff --git a/board/cubietech/cubieboard2/patches/linux-headers/linux-headers.hash b/board/freescale/imxrt1050evk/patches/linux-headers/linuux-headers.hash similarity index 100% rename from board/cubietech/cubieboard2/patches/linux-headers/linux-headers.hash rename to board/freescale/imxrt1050evk/patches/linux-headers/linuux-headers.hash diff --git a/board/freescale/imxrt1050evk/patches/linux/linux.hash b/board/freescale/imxrt1050evk/patches/linux/linux.hash new file mode 100644 index 00000000000..020dc72386c --- /dev/null +++ b/board/freescale/imxrt1050evk/patches/linux/linux.hash @@ -0,0 +1,2 @@ +# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc +sha256 f4855f382c1b735c84072bdef36db5bcd5dc7b0c37e42f5104317149a0a486ef linux-6.18.18.tar.xz diff --git a/board/freescale/imxrt1050evk/patches/uboot/uboot.hash b/board/freescale/imxrt1050evk/patches/uboot/uboot.hash new file mode 100644 index 00000000000..b6a925ea4e8 --- /dev/null +++ b/board/freescale/imxrt1050evk/patches/uboot/uboot.hash @@ -0,0 +1,2 @@ +# Locally calculated +sha256 b60d5865cefdbc75da8da4156c56c458e00de75a49b80c1a2e58a96e30ad0d54 u-boot-2026.01.tar.bz2 diff --git a/board/freescale/ls1028ardb/patches/arm-trusted-firmware/arm-trusted-firmware.hash b/board/freescale/ls1028ardb/patches/arm-trusted-firmware/arm-trusted-firmware.hash index 41c7ad4068a..4a62068d297 100644 --- a/board/freescale/ls1028ardb/patches/arm-trusted-firmware/arm-trusted-firmware.hash +++ b/board/freescale/ls1028ardb/patches/arm-trusted-firmware/arm-trusted-firmware.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 2751fcd3eb9080c34531f68ca2e1f571a60f4220853df53a5ebed9835abf8c13 atf-lf-6.12.3-1.0.0.tar.gz +sha256 658af40a90fd8e2460d364775a0c37e0507201e49de7f69c8a22d61e179f81e1 atf-lf-6.18.20-2.0.0.tar.gz diff --git a/board/freescale/ls1028ardb/patches/linux/linux.hash b/board/freescale/ls1028ardb/patches/linux/linux.hash index 43dbe074c2e..85d5173aa78 100644 --- a/board/freescale/ls1028ardb/patches/linux/linux.hash +++ b/board/freescale/ls1028ardb/patches/linux/linux.hash @@ -1,2 +1,2 @@ # Locally computed -sha256 9e2fff1014f1b196be8149c63a6054e40b1b36b222e53db3f445c96c856066e0 linux-lf-6.12.3-1.0.0.tar.gz +sha256 206f997d41bb958099bf7a89a02a6889942b118984f81f9a45bec9907f60708f linux-lf-6.18.20-2.0.0.tar.gz diff --git a/board/freescale/ls1028ardb/patches/uboot/uboot.hash b/board/freescale/ls1028ardb/patches/uboot/uboot.hash index 5e36d934878..80bbe7d2191 100644 --- a/board/freescale/ls1028ardb/patches/uboot/uboot.hash +++ b/board/freescale/ls1028ardb/patches/uboot/uboot.hash @@ -1,2 +1,2 @@ # Locally computed -sha256 8708fc95844d020f79b87f954f29073ae9b230de3e41117e7fb379294da946ac u-boot-lf-6.12.3-1.0.0.tar.gz +sha256 04aed627132db7b656117c7a35fb29d314172319fa3a297ea6748eebac2b5ce3 u-boot-lf-6.18.20-2.0.0.tar.gz diff --git a/board/freescale/ls1028ardb/readme.txt b/board/freescale/ls1028ardb/readme.txt index 8be720a8039..d2bcee0ac2a 100644 --- a/board/freescale/ls1028ardb/readme.txt +++ b/board/freescale/ls1028ardb/readme.txt @@ -10,21 +10,22 @@ For more details about the board and the QorIQ Layerscape SoC, see the following Layerscape platforms are officially supported by NXP under the Layerscape Debian Linux SDK (LDLSDK). This uses components from Linux Factory (project -common with i.MX), currently tag lf-6.6.36-2.1.0, two releases behind the -latest lf-6.12.3-1.0.0. In Buildroot, the latest Linux Factory release tag -is used, which may be considered pre-release software, as it may contain -features which are not yet documented, and it generally undergoes less testing. +common with i.MX), but has a slower release cadence than LF. The currently used +tag is lf-6.18.20-2.0.0, which is in line with the latest LF tag. Generally, in +Buildroot, the latest Linux Factory release tag is always used, which may be +considered pre-release software, as it may contain features which are not yet +documented, and it generally undergoes less testing. For the software Layerscape Debian Linux SDK User Guide, see: - https://docs.nxp.com/bundle/UG10143/page/topics/about_this_document.html - https://www.nxp.com/docs/en/user-guide/UG10143.pdf The components from NXP are: - - rcw, lf-6.12.3-1.0.0 - - atf (fork), lf-6.12.3-1.0.0 - - uboot (fork), lf-6.12.3-1.0.0 + - rcw, lf-6.18.20-2.0.0 + - atf (fork), lf-6.18.20-2.0.0 + - uboot (fork), lf-6.18.20-2.0.0 - cadence-dp-firmware (blob), 8.16 - - linux (fork), lf-6.12.3-1.0.0 + - linux (fork), lf-6.18.20-2.0.0 Build ===== diff --git a/board/freescale/ls1043a-rdb/patches/arm-trusted-firmware/arm-trusted-firmware.hash b/board/freescale/ls1043a-rdb/patches/arm-trusted-firmware/arm-trusted-firmware.hash index 41c7ad4068a..4a62068d297 100644 --- a/board/freescale/ls1043a-rdb/patches/arm-trusted-firmware/arm-trusted-firmware.hash +++ b/board/freescale/ls1043a-rdb/patches/arm-trusted-firmware/arm-trusted-firmware.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 2751fcd3eb9080c34531f68ca2e1f571a60f4220853df53a5ebed9835abf8c13 atf-lf-6.12.3-1.0.0.tar.gz +sha256 658af40a90fd8e2460d364775a0c37e0507201e49de7f69c8a22d61e179f81e1 atf-lf-6.18.20-2.0.0.tar.gz diff --git a/board/freescale/ls1043a-rdb/patches/linux/linux.hash b/board/freescale/ls1043a-rdb/patches/linux/linux.hash index 43dbe074c2e..85d5173aa78 100644 --- a/board/freescale/ls1043a-rdb/patches/linux/linux.hash +++ b/board/freescale/ls1043a-rdb/patches/linux/linux.hash @@ -1,2 +1,2 @@ # Locally computed -sha256 9e2fff1014f1b196be8149c63a6054e40b1b36b222e53db3f445c96c856066e0 linux-lf-6.12.3-1.0.0.tar.gz +sha256 206f997d41bb958099bf7a89a02a6889942b118984f81f9a45bec9907f60708f linux-lf-6.18.20-2.0.0.tar.gz diff --git a/board/freescale/ls1043a-rdb/patches/uboot/uboot.hash b/board/freescale/ls1043a-rdb/patches/uboot/uboot.hash index 5e36d934878..80bbe7d2191 100644 --- a/board/freescale/ls1043a-rdb/patches/uboot/uboot.hash +++ b/board/freescale/ls1043a-rdb/patches/uboot/uboot.hash @@ -1,2 +1,2 @@ # Locally computed -sha256 8708fc95844d020f79b87f954f29073ae9b230de3e41117e7fb379294da946ac u-boot-lf-6.12.3-1.0.0.tar.gz +sha256 04aed627132db7b656117c7a35fb29d314172319fa3a297ea6748eebac2b5ce3 u-boot-lf-6.18.20-2.0.0.tar.gz diff --git a/board/freescale/ls1043a-rdb/readme.txt b/board/freescale/ls1043a-rdb/readme.txt index 1b6f25904ae..df067aa1e82 100644 --- a/board/freescale/ls1043a-rdb/readme.txt +++ b/board/freescale/ls1043a-rdb/readme.txt @@ -10,23 +10,24 @@ for more details about the board and the QorIQ Layerscape SoC, see the following Layerscape platforms are officially supported by NXP under the Layerscape Debian Linux SDK (LDLSDK). This uses components from Linux Factory (project -common with i.MX), currently tag lf-6.6.36-2.1.0, two releases behind the -latest lf-6.12.3-1.0.0. In Buildroot, the latest Linux Factory release tag -is used, which may be considered pre-release software, as it may contain -features which are not yet documented, and it generally undergoes less testing. +common with i.MX), but has a slower release cadence than LF. The currently used +tag is lf-6.18.20-2.0.0, which is in line with the latest LF tag. Generally, in +Buildroot, the latest Linux Factory release tag is always used, which may be +considered pre-release software, as it may contain features which are not yet +documented, and it generally undergoes less testing. For the software Layerscape Debian Linux SDK User Guide, see: - https://docs.nxp.com/bundle/UG10143/page/topics/about_this_document.html - https://www.nxp.com/docs/en/user-guide/UG10143.pdf The components from NXP are: - - rcw, lf-6.12.3-1.0.0 - - atf (fork), lf-6.12.3-1.0.0 - - uboot (fork), lf-6.12.3-1.0.0 - - qoriq-fm-ucode (blob), lf-6.12.3-1.0.0 - - linux (fork), lf-6.12.3-1.0.0 - - fmlib, lf-6.12.3-1.0.0 - - fmc, lf-6.12.3-1.0.0 + - rcw, lf-6.18.20-2.0.0 + - atf (fork), lf-6.18.20-2.0.0 + - uboot (fork), lf-6.18.20-2.0.0 + - qoriq-fm-ucode (blob), lf-6.18.20-2.0.0 + - linux (fork), lf-6.18.20-2.0.0 + - fmlib, lf-6.18.20-2.0.0 + - fmc, lf-6.18.20-2.0.0 Build ===== diff --git a/board/freescale/ls1046a-frwy/patches/arm-trusted-firmware/arm-trusted-firmware.hash b/board/freescale/ls1046a-frwy/patches/arm-trusted-firmware/arm-trusted-firmware.hash index 41c7ad4068a..4a62068d297 100644 --- a/board/freescale/ls1046a-frwy/patches/arm-trusted-firmware/arm-trusted-firmware.hash +++ b/board/freescale/ls1046a-frwy/patches/arm-trusted-firmware/arm-trusted-firmware.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 2751fcd3eb9080c34531f68ca2e1f571a60f4220853df53a5ebed9835abf8c13 atf-lf-6.12.3-1.0.0.tar.gz +sha256 658af40a90fd8e2460d364775a0c37e0507201e49de7f69c8a22d61e179f81e1 atf-lf-6.18.20-2.0.0.tar.gz diff --git a/board/freescale/ls1046a-frwy/patches/linux/linux.hash b/board/freescale/ls1046a-frwy/patches/linux/linux.hash index 43dbe074c2e..85d5173aa78 100644 --- a/board/freescale/ls1046a-frwy/patches/linux/linux.hash +++ b/board/freescale/ls1046a-frwy/patches/linux/linux.hash @@ -1,2 +1,2 @@ # Locally computed -sha256 9e2fff1014f1b196be8149c63a6054e40b1b36b222e53db3f445c96c856066e0 linux-lf-6.12.3-1.0.0.tar.gz +sha256 206f997d41bb958099bf7a89a02a6889942b118984f81f9a45bec9907f60708f linux-lf-6.18.20-2.0.0.tar.gz diff --git a/board/freescale/ls1046a-frwy/patches/uboot/uboot.hash b/board/freescale/ls1046a-frwy/patches/uboot/uboot.hash index 5e36d934878..80bbe7d2191 100644 --- a/board/freescale/ls1046a-frwy/patches/uboot/uboot.hash +++ b/board/freescale/ls1046a-frwy/patches/uboot/uboot.hash @@ -1,2 +1,2 @@ # Locally computed -sha256 8708fc95844d020f79b87f954f29073ae9b230de3e41117e7fb379294da946ac u-boot-lf-6.12.3-1.0.0.tar.gz +sha256 04aed627132db7b656117c7a35fb29d314172319fa3a297ea6748eebac2b5ce3 u-boot-lf-6.18.20-2.0.0.tar.gz diff --git a/board/freescale/ls1046a-frwy/readme.txt b/board/freescale/ls1046a-frwy/readme.txt index 8c83a4eac94..4312afe40f3 100644 --- a/board/freescale/ls1046a-frwy/readme.txt +++ b/board/freescale/ls1046a-frwy/readme.txt @@ -11,23 +11,24 @@ For more details about the board and the QorIQ Layerscape SoC, see the following Layerscape platforms are officially supported by NXP under the Layerscape Debian Linux SDK (LDLSDK). This uses components from Linux Factory (project -common with i.MX), currently tag lf-6.6.36-2.1.0, two releases behind the -latest lf-6.12.3-1.0.0. In Buildroot, the latest Linux Factory release tag -is used, which may be considered pre-release software, as it may contain -features which are not yet documented, and it generally undergoes less testing. +common with i.MX), but has a slower release cadence than LF. The currently used +tag is lf-6.18.20-2.0.0, which is in line with the latest LF tag. Generally, in +Buildroot, the latest Linux Factory release tag is always used, which may be +considered pre-release software, as it may contain features which are not yet +documented, and it generally undergoes less testing. For the software Layerscape Debian Linux SDK User Guide, see: - https://docs.nxp.com/bundle/UG10143/page/topics/about_this_document.html - https://www.nxp.com/docs/en/user-guide/UG10143.pdf The components from NXP are: - - rcw, lf-6.12.3-1.0.0 - - atf (fork), lf-6.12.3-1.0.0 - - uboot (fork), lf-6.12.3-1.0.0 - - qoriq-fm-ucode (blob), lf-6.12.3-1.0.0 - - linux (fork), lf-6.12.3-1.0.0 - - fmlib, lf-6.12.3-1.0.0 - - fmc, lf-6.12.3-1.0.0 + - rcw, lf-6.18.20-2.0.0 + - atf (fork), lf-6.18.20-2.0.0 + - uboot (fork), lf-6.18.20-2.0.0 + - qoriq-fm-ucode (blob), lf-6.18.20-2.0.0 + - linux (fork), lf-6.18.20-2.0.0 + - fmlib, lf-6.18.20-2.0.0 + - fmc, lf-6.18.20-2.0.0 Build ===== diff --git a/board/freescale/ls1046a-rdb/patches/arm-trusted-firmware/arm-trusted-firmware.hash b/board/freescale/ls1046a-rdb/patches/arm-trusted-firmware/arm-trusted-firmware.hash index 41c7ad4068a..4a62068d297 100644 --- a/board/freescale/ls1046a-rdb/patches/arm-trusted-firmware/arm-trusted-firmware.hash +++ b/board/freescale/ls1046a-rdb/patches/arm-trusted-firmware/arm-trusted-firmware.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 2751fcd3eb9080c34531f68ca2e1f571a60f4220853df53a5ebed9835abf8c13 atf-lf-6.12.3-1.0.0.tar.gz +sha256 658af40a90fd8e2460d364775a0c37e0507201e49de7f69c8a22d61e179f81e1 atf-lf-6.18.20-2.0.0.tar.gz diff --git a/board/freescale/ls1046a-rdb/patches/linux/linux.hash b/board/freescale/ls1046a-rdb/patches/linux/linux.hash index 43dbe074c2e..85d5173aa78 100644 --- a/board/freescale/ls1046a-rdb/patches/linux/linux.hash +++ b/board/freescale/ls1046a-rdb/patches/linux/linux.hash @@ -1,2 +1,2 @@ # Locally computed -sha256 9e2fff1014f1b196be8149c63a6054e40b1b36b222e53db3f445c96c856066e0 linux-lf-6.12.3-1.0.0.tar.gz +sha256 206f997d41bb958099bf7a89a02a6889942b118984f81f9a45bec9907f60708f linux-lf-6.18.20-2.0.0.tar.gz diff --git a/board/freescale/ls1046a-rdb/patches/uboot/uboot.hash b/board/freescale/ls1046a-rdb/patches/uboot/uboot.hash index 5e36d934878..80bbe7d2191 100644 --- a/board/freescale/ls1046a-rdb/patches/uboot/uboot.hash +++ b/board/freescale/ls1046a-rdb/patches/uboot/uboot.hash @@ -1,2 +1,2 @@ # Locally computed -sha256 8708fc95844d020f79b87f954f29073ae9b230de3e41117e7fb379294da946ac u-boot-lf-6.12.3-1.0.0.tar.gz +sha256 04aed627132db7b656117c7a35fb29d314172319fa3a297ea6748eebac2b5ce3 u-boot-lf-6.18.20-2.0.0.tar.gz diff --git a/board/freescale/ls1046a-rdb/readme.txt b/board/freescale/ls1046a-rdb/readme.txt index 72005b20d93..a79bd886fad 100644 --- a/board/freescale/ls1046a-rdb/readme.txt +++ b/board/freescale/ls1046a-rdb/readme.txt @@ -10,23 +10,24 @@ for more details about the board and the QorIQ Layerscape SoC, see the following Layerscape platforms are officially supported by NXP under the Layerscape Debian Linux SDK (LDLSDK). This uses components from Linux Factory (project -common with i.MX), currently tag lf-6.6.36-2.1.0, two releases behind the -latest lf-6.12.3-1.0.0. In Buildroot, the latest Linux Factory release tag -is used, which may be considered pre-release software, as it may contain -features which are not yet documented, and it generally undergoes less testing. +common with i.MX), but has a slower release cadence than LF. The currently used +tag is lf-6.18.20-2.0.0, which is in line with the latest LF tag. Generally, in +Buildroot, the latest Linux Factory release tag is always used, which may be +considered pre-release software, as it may contain features which are not yet +documented, and it generally undergoes less testing. For the software Layerscape Debian Linux SDK User Guide, see: - https://docs.nxp.com/bundle/UG10143/page/topics/about_this_document.html - https://www.nxp.com/docs/en/user-guide/UG10143.pdf The components from NXP are: - - rcw, lf-6.12.3-1.0.0 - - atf (fork), lf-6.12.3-1.0.0 - - uboot (fork), lf-6.12.3-1.0.0 - - qoriq-fm-ucode (blob), lf-6.12.3-1.0.0 - - linux (fork), lf-6.12.3-1.0.0 - - fmlib, lf-6.12.3-1.0.0 - - fmc, lf-6.12.3-1.0.0 + - rcw, lf-6.18.20-2.0.0 + - atf (fork), lf-6.18.20-2.0.0 + - uboot (fork), lf-6.18.20-2.0.0 + - qoriq-fm-ucode (blob), lf-6.18.20-2.0.0 + - linux (fork), lf-6.18.20-2.0.0 + - fmlib, lf-6.18.20-2.0.0 + - fmc, lf-6.18.20-2.0.0 Build ===== diff --git a/board/friendlyarm/nanopi-neo/patches/linux/linux.hash b/board/friendlyarm/nanopi-neo/patches/linux/linux.hash index ecff37638a0..020dc72386c 100644 --- a/board/friendlyarm/nanopi-neo/patches/linux/linux.hash +++ b/board/friendlyarm/nanopi-neo/patches/linux/linux.hash @@ -1,2 +1,2 @@ -# Locally calculated -sha256 93218296934915636fe6ba08e125948424cc270fd8948502c0ab91087a9fccd8 linux-6.6.44.tar.xz +# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc +sha256 f4855f382c1b735c84072bdef36db5bcd5dc7b0c37e42f5104317149a0a486ef linux-6.18.18.tar.xz diff --git a/board/friendlyarm/nanopi-neo/patches/uboot/uboot.hash b/board/friendlyarm/nanopi-neo/patches/uboot/uboot.hash index fe9b4f53dc6..b6a925ea4e8 100644 --- a/board/friendlyarm/nanopi-neo/patches/uboot/uboot.hash +++ b/board/friendlyarm/nanopi-neo/patches/uboot/uboot.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 f591da9ab90ef3d6b3d173766d0ddff90c4ed7330680897486117df390d83c8f u-boot-2024.07.tar.bz2 +sha256 b60d5865cefdbc75da8da4156c56c458e00de75a49b80c1a2e58a96e30ad0d54 u-boot-2026.01.tar.bz2 diff --git a/board/friendlyarm/nanopi-r2s/patches/linux/linux.hash b/board/friendlyarm/nanopi-r2s/patches/linux/linux.hash new file mode 100644 index 00000000000..020dc72386c --- /dev/null +++ b/board/friendlyarm/nanopi-r2s/patches/linux/linux.hash @@ -0,0 +1,2 @@ +# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc +sha256 f4855f382c1b735c84072bdef36db5bcd5dc7b0c37e42f5104317149a0a486ef linux-6.18.18.tar.xz diff --git a/board/friendlyarm/nanopi-r2s/patches/uboot/uboot.hash b/board/friendlyarm/nanopi-r2s/patches/uboot/uboot.hash new file mode 100644 index 00000000000..b6a925ea4e8 --- /dev/null +++ b/board/friendlyarm/nanopi-r2s/patches/uboot/uboot.hash @@ -0,0 +1,2 @@ +# Locally calculated +sha256 b60d5865cefdbc75da8da4156c56c458e00de75a49b80c1a2e58a96e30ad0d54 u-boot-2026.01.tar.bz2 diff --git a/board/friendlyarm/nanopi-r3s/patches/linux/linux.hash b/board/friendlyarm/nanopi-r3s/patches/linux/linux.hash index 451159a6dc4..f83883b936d 100644 --- a/board/friendlyarm/nanopi-r3s/patches/linux/linux.hash +++ b/board/friendlyarm/nanopi-r3s/patches/linux/linux.hash @@ -1,2 +1,2 @@ # From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc -sha256 21817f1998e2230f81f7e4f605fa6fdcb040e14fa27d99c27ddb16ce749797a9 linux-6.14.6.tar.xz +sha256 37f0c5d5c242c1d604e87d48f08795e861a5a85f725b4ca11d0a538f12ff8cff linux-6.18.8.tar.xz diff --git a/board/friendlyarm/nanopi-r3s/patches/uboot/uboot.hash b/board/friendlyarm/nanopi-r3s/patches/uboot/uboot.hash index b550824126f..74d80a0daa1 100644 --- a/board/friendlyarm/nanopi-r3s/patches/uboot/uboot.hash +++ b/board/friendlyarm/nanopi-r3s/patches/uboot/uboot.hash @@ -1,2 +1,2 @@ # Locally computed: -sha256 439d3bef296effd54130be6a731c5b118be7fddd7fcc663ccbc5fb18294d8718 u-boot-2025.04.tar.bz2 +sha256 b60d5865cefdbc75da8da4156c56c458e00de75a49b80c1a2e58a96e30ad0d54 u-boot-2026.01.tar.bz2 diff --git a/board/hp/9000/genimage.cfg.in b/board/hp/9000/genimage.cfg.in new file mode 100644 index 00000000000..5a593075527 --- /dev/null +++ b/board/hp/9000/genimage.cfg.in @@ -0,0 +1,16 @@ +image disk.img { + hdimage { + partition-table-type = "mbr" + disk-signature = 0x%PARTUUID% + } + + partition boot { + partition-type= 0xF0 + size = 16M + } + + partition root { + partition-type= 0x83 + image = "rootfs.ext2" + } +} diff --git a/board/hp/9000/palo.sh.in b/board/hp/9000/palo.sh.in new file mode 100644 index 00000000000..9743111bc8f --- /dev/null +++ b/board/hp/9000/palo.sh.in @@ -0,0 +1,21 @@ +#!/bin/sh +set -eu + +# Generate lifimage. +palo \ + --bootloader="${BINARIES_DIR}/iplboot" \ + --commandline='0/vmlinux initrd=0/ramdisk' \ + --configfile=/dev/null \ + --init-tape="${BINARIES_DIR}/lifimage" \ + --ramdisk="${BINARIES_DIR}/rootfs.cpio.gz" \ + --recoverykernel="${BINARIES_DIR}/vmlinux" \ + --verbose + +# Install loader to disk image. +palo \ + --bootloader="${BINARIES_DIR}/iplboot" \ + --commandline="1/vmlinux root=PARTUUID=%PARTUUID%-02 rootwait" \ + --configfile=/dev/null \ + --init-partitioned="${BINARIES_DIR}/disk.img" \ + --recoverykernel="${BINARIES_DIR}/vmlinux" \ + --verbose diff --git a/board/freescale/imx91frdm/patches/linux-headers/linux-headers.hash b/board/hp/9000/patches/linux-headers/linux-headers.hash similarity index 100% rename from board/freescale/imx91frdm/patches/linux-headers/linux-headers.hash rename to board/hp/9000/patches/linux-headers/linux-headers.hash diff --git a/board/hp/9000/patches/linux/linux.hash b/board/hp/9000/patches/linux/linux.hash new file mode 100644 index 00000000000..e05e102f0e1 --- /dev/null +++ b/board/hp/9000/patches/linux/linux.hash @@ -0,0 +1,2 @@ +# From https://cdn.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc +sha256 76bffbae7eab2a1de1ed05692bef709f43b02a52fe95ae655cacf0fa252213f3 linux-6.16.5.tar.xz diff --git a/board/hp/9000/post-image.sh b/board/hp/9000/post-image.sh new file mode 100755 index 00000000000..e489e0bf9eb --- /dev/null +++ b/board/hp/9000/post-image.sh @@ -0,0 +1,16 @@ +#!/bin/sh +set -eu + +BOARD_DIR="$(dirname "$0")" + +# Generate a random 32-bit signature for the disk image and +# substitute it in genimage configuration file and palo script. +PARTUUID="$("$HOST_DIR"/bin/uuidgen -r |sed 's/-.*//')" + +sed "s/%PARTUUID%/$PARTUUID/g" "$BOARD_DIR/genimage.cfg.in" \ + > "$BINARIES_DIR/genimage.cfg" + +sed "s/%PARTUUID%/$PARTUUID/g" "$BOARD_DIR/palo.sh.in" \ + > "$BINARIES_DIR/palo.sh" + +chmod +x "$BINARIES_DIR/palo.sh" diff --git a/board/hp/9000/readme.txt b/board/hp/9000/readme.txt new file mode 100644 index 00000000000..9a07c55253f --- /dev/null +++ b/board/hp/9000/readme.txt @@ -0,0 +1,57 @@ +Introduction +============ + +The hp_9000_defconfig is meant to run Linux on a large range of 32-bit +HP PA-RISC 1.1 Workstations, such as the HP 9000 700 and Visualize +workstations. [1] + +Building +======== + + $ make hp_9000_defconfig + $ make + +Generated files under output/images: + +* lifimage: network bootable image comprising Linux kernel and ramdisk. +* disk.img: bootable disk image, with Linux kernel and root filesystem. + +Running +======= + +To run the generated system, one method is to write the disk image directly to +the workstation hard disk drive using a PC and an SCSI adapter. Extract the +disk from the workstation, connect it to the PC, then do: + + # dd if=output/images/disk.img of= ; sync + +Put the disk back into the workstation, connect to the UART console with +baudrate 9600; the firmware should boot Linux from disk and you should obtain a +login prompt. + +Another method is to boot from the network. This necessitates to setup a DHCP +and TFTP server, such as dnsmasq[2], to give the workstation its boot filename +with DHCP and serve the lifimage with TFTP. + +Connect to the UART console with baudrate 9600 and interrupt the boot sequence +of the firmware. + +On an HP 9000 712 workstation, do: + + BOOT_ADMIN> boot lan + +On an HP Visualize J210XC workstation, do: + + Configuration Menu: Enter command > boot lan + Interact with IPL (Y or N)?> n + +The firmware should boot Linux from the network and you should obtain a login +prompt. + +It is possible to download the disk image from the network and write it to the +hard disk drive, for example with TFTP: + + # tftp -g -r /disk.img -l /dev/sda + +[1] https://www.openpa.net/systems/ +[2] https://dnsmasq.org/doc.html diff --git a/board/khadas/vim3/genimage.cfg b/board/khadas/vim3/genimage.cfg index 79d7f9ca076..1ceb5e4e8bc 100644 --- a/board/khadas/vim3/genimage.cfg +++ b/board/khadas/vim3/genimage.cfg @@ -27,7 +27,6 @@ image sdcard.img { partition rootfs { partition-type = 0x83 image = "rootfs.ext2" - size = 128M offset = 0 } } diff --git a/board/khadas/vim3/patches/linux/linux.hash b/board/khadas/vim3/patches/linux/linux.hash new file mode 100644 index 00000000000..6ef79ed70a2 --- /dev/null +++ b/board/khadas/vim3/patches/linux/linux.hash @@ -0,0 +1,2 @@ +# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc +sha256 7c716216c3c4134ed0de69195701e677577bbcdd3979f331c182acd06bf2f170 linux-6.18.15.tar.xz diff --git a/board/khadas/vim3/patches/uboot/uboot.hash b/board/khadas/vim3/patches/uboot/uboot.hash new file mode 100644 index 00000000000..b6a925ea4e8 --- /dev/null +++ b/board/khadas/vim3/patches/uboot/uboot.hash @@ -0,0 +1,2 @@ +# Locally calculated +sha256 b60d5865cefdbc75da8da4156c56c458e00de75a49b80c1a2e58a96e30ad0d54 u-boot-2026.01.tar.bz2 diff --git a/board/kontron/smarc-sal28/patches/linux/linux.hash b/board/kontron/smarc-sal28/patches/linux/linux.hash new file mode 100644 index 00000000000..a4cc7bd3f6f --- /dev/null +++ b/board/kontron/smarc-sal28/patches/linux/linux.hash @@ -0,0 +1,2 @@ +# From https://cdn.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc +sha256 9106a4605da9e31ff17659d958782b815f9591ab308d03b0ee21aad6c7dced4b linux-6.18.tar.xz diff --git a/board/kontron/smarc-sal28/patches/uboot/uboot.hash b/board/kontron/smarc-sal28/patches/uboot/uboot.hash new file mode 100644 index 00000000000..36322a6a904 --- /dev/null +++ b/board/kontron/smarc-sal28/patches/uboot/uboot.hash @@ -0,0 +1,2 @@ +# Locally calculated +sha256 ac7c04b8b7004923b00a4e5d6699c5df4d21233bac9fda690d8cfbc209fff2fd u-boot-2026.04.tar.bz2 diff --git a/board/librecomputer/lafrite/patches/linux/linux.hash b/board/librecomputer/lafrite/patches/linux/linux.hash index 899adefd079..6f1b1a66e4e 100644 --- a/board/librecomputer/lafrite/patches/linux/linux.hash +++ b/board/librecomputer/lafrite/patches/linux/linux.hash @@ -1,2 +1,2 @@ -# Locally calculated -sha256 23e3e7b56407250f5411bdab95763d0bc4e3a19dfa431d951df7eacabd61a2f4 linux-6.6.22.tar.xz +# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc +sha256 4633bbda2ab95eaf2a7af4041236451d6759c72e6946265531af4b3aacefbf89 linux-6.18.56.tar.xz diff --git a/board/librecomputer/lafrite/readme.txt b/board/librecomputer/lafrite/readme.txt index c439c5e91dd..8747a9a23f3 100644 --- a/board/librecomputer/lafrite/readme.txt +++ b/board/librecomputer/lafrite/readme.txt @@ -6,6 +6,14 @@ s805x SoC (quad A53), 512MB/1GB DDR4 and a 16MB SPI NOR flash: https://libre.computer/products/boards/aml-s805x-ac/ +Ensure the the bootloader in the SPI flash is up-to-date. Updates are +available at: + +https://boot.libre.computer/release/aml-s805x-ac/ + +To update, write aml-s805x-ac-spiflash.img to a USB flash drive and +boot it as described below. + How to build it =============== @@ -32,3 +40,10 @@ How to boot Insert flash drive to the USB connector furthest away from the IR receiver and power up board. The system will boot automatically. + +A serial console is available on the GPIO header with the following +pinout: + +- TX: pin 3 +- RX: pin 5 +- Ground: pin 6 diff --git a/board/loongarch64-efi/grub.cfg b/board/loongarch64-efi/grub.cfg index 2006f6d60d9..c84a7f646b8 100644 --- a/board/loongarch64-efi/grub.cfg +++ b/board/loongarch64-efi/grub.cfg @@ -1,4 +1,4 @@ -/set default="0" +set default="0" set timeout="5" menuentry "Buildroot" { diff --git a/board/freescale/imx93frdm/patches/linux-headers/linux-headers.hash b/board/mangopi/mq1rdw2/patches/linux-headers/linux-headers.hash similarity index 100% rename from board/freescale/imx93frdm/patches/linux-headers/linux-headers.hash rename to board/mangopi/mq1rdw2/patches/linux-headers/linux-headers.hash diff --git a/board/mangopi/mq1rdw2/patches/linux/linux.hash b/board/mangopi/mq1rdw2/patches/linux/linux.hash new file mode 100644 index 00000000000..f83883b936d --- /dev/null +++ b/board/mangopi/mq1rdw2/patches/linux/linux.hash @@ -0,0 +1,2 @@ +# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc +sha256 37f0c5d5c242c1d604e87d48f08795e861a5a85f725b4ca11d0a538f12ff8cff linux-6.18.8.tar.xz diff --git a/board/mangopi/mq1rdw2/patches/uboot/uboot.hash b/board/mangopi/mq1rdw2/patches/uboot/uboot.hash new file mode 100644 index 00000000000..b6a925ea4e8 --- /dev/null +++ b/board/mangopi/mq1rdw2/patches/uboot/uboot.hash @@ -0,0 +1,2 @@ +# Locally calculated +sha256 b60d5865cefdbc75da8da4156c56c458e00de75a49b80c1a2e58a96e30ad0d54 u-boot-2026.01.tar.bz2 diff --git a/board/microchip/mpfs_icicle/mpfs_icicle.its b/board/microchip/mpfs_icicle/mpfs_icicle.its index a62b079fa12..2f89a6ee2f1 100644 --- a/board/microchip/mpfs_icicle/mpfs_icicle.its +++ b/board/microchip/mpfs_icicle/mpfs_icicle.its @@ -24,7 +24,7 @@ algo = "sha256"; }; }; - base_fdt { + fdt-mpfs-icicle-kit.dtb { description = "Flattened Device Tree blob"; data = /incbin/("./mpfs-icicle-kit.dtb"); type = "flat_dt"; @@ -35,19 +35,41 @@ algo = "sha256"; }; }; + fdt-mpfs-icicle-kit-prod.dtb { + description = "Flattened Device Tree blob"; + data = /incbin/("./mpfs-icicle-kit-prod.dtb"); + type = "flat_dt"; + arch = "riscv"; + compression = "none"; + load = <0x8a000000>; + hash-1 { + algo = "sha256"; + }; + }; }; configurations { - default = "kernel_dtb"; - kernel_dtb { + default = "conf-microchip,mpfs-icicle-kit-prod"; + conf-microchip,mpfs-icicle-kit { description = "1 Linux kernel, FDT blob"; kernel = "kernel"; - fdt = "base_fdt"; + fdt = "fdt-mpfs-icicle-kit.dtb"; }; - base_dtb { + conf-microchip,mpfs-icicle-kit-prod { + description = "1 Linux kernel, FDT blob"; + kernel = "kernel"; + fdt = "fdt-mpfs-icicle-kit-prod.dtb"; + }; + + conf-microchip,fdt-mpfs-icicle-kit.dtb { description = "Base FDT blob for MPFS Icicle board"; - fdt = "base_fdt"; + fdt = "fdt-mpfs-icicle-kit.dtb"; + }; + + conf-microchip,fdt-mpfs-icicle-kit-prod.dtb { + description = "Base FDT blob for MPFS Icicle Production board"; + fdt = "fdt-mpfs-icicle-kit-prod.dtb"; }; }; -}; +}; \ No newline at end of file diff --git a/board/microchip/mpfs_icicle/patches/linux/linux.hash b/board/microchip/mpfs_icicle/patches/linux/linux.hash index 416a8b1550b..2902da56b63 100644 --- a/board/microchip/mpfs_icicle/patches/linux/linux.hash +++ b/board/microchip/mpfs_icicle/patches/linux/linux.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 dcb7b41fd363729675c34545fcb514d5a94dbb3714ee10f527a26ca7716c2579 linux-linux4microchip+fpga-2024.06.tar.gz +sha256 37191994758d521dc7223cb5010a67ef83bd061bf70194ea522abc9ef2b17391 linux-linux4microchip+fpga-2025.10.tar.gz diff --git a/board/microchip/mpfs_icicle/patches/uboot/uboot.hash b/board/microchip/mpfs_icicle/patches/uboot/uboot.hash index 2628d4b4fd6..a40f963a2e4 100644 --- a/board/microchip/mpfs_icicle/patches/uboot/uboot.hash +++ b/board/microchip/mpfs_icicle/patches/uboot/uboot.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 d461c45a9c5acd019776cdcf8ab2b571315282a880dd6580431f7dd5bfac3889 uboot-linux4microchip+fpga-2024.06.tar.gz +sha256 591c80f7e16d6f43192deb7ab7587ae81b31ba7c7de1a668c14b9997b6c976c8 uboot-linux4microchip+fpga-2025.10.tar.gz diff --git a/board/microchip/mpfs_icicle/uboot-env.txt b/board/microchip/mpfs_icicle/uboot-env.txt index 8a655085ed1..befbfa20065 100644 --- a/board/microchip/mpfs_icicle/uboot-env.txt +++ b/board/microchip/mpfs_icicle/uboot-env.txt @@ -5,12 +5,15 @@ setenv fdt_high 0xffffffffffffffff setenv initrd_high 0xffffffffffffffff -load mmc 0:${distro_bootpart} ${scriptaddr} mpfs_icicle.itb; -bootm start ${scriptaddr}#kernel_dtb; -bootm loados ${scriptaddr}; -# Try to load a ramdisk if available inside fitImage -bootm ramdisk; -bootm prep; -fdt set /soc/ethernet@20112000 mac-address ${icicle_mac_addr0}; -fdt set /soc/ethernet@20110000 mac-address ${icicle_mac_addr1}; -bootm go; +fdt addr ${fdtcontroladdr} +fdt get value board_compatible / compatible 1 + +setenv fitconf conf-${board_compatible} + +load mmc 0:${distro_bootpart} ${scriptaddr} mpfs_icicle.itb +bootm start ${scriptaddr}#${fitconf} +bootm loados ${scriptaddr} +bootm ramdisk +bootm prep +run design_overlays +bootm go diff --git a/board/microchip/mpfs_icicle/uboot-fragment-rootfs.config b/board/microchip/mpfs_icicle/uboot-fragment-rootfs.config index e2a5eb94385..47f4c35ea43 100644 --- a/board/microchip/mpfs_icicle/uboot-fragment-rootfs.config +++ b/board/microchip/mpfs_icicle/uboot-fragment-rootfs.config @@ -1,3 +1,4 @@ CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/mmcblk0p3 rootwait uio_pdrv_genirq.of_id=generic-uio" CONFIG_MPFS_PRIORITISE_QSPI_BOOT=n +CONFIG_OF_BOARD=y diff --git a/board/olimex/a10_olinuxino/boot.cmd b/board/olimex/a10_olinuxino/boot.cmd deleted file mode 120000 index 612c745500b..00000000000 --- a/board/olimex/a10_olinuxino/boot.cmd +++ /dev/null @@ -1 +0,0 @@ -../a20_olinuxino/boot.cmd \ No newline at end of file diff --git a/board/friendlyarm/nanopi-neo/patches/linux-headers/linux-headers.hash b/board/olimex/a10_olinuxino/patches/linux-headers/linux-headers.hash similarity index 100% rename from board/friendlyarm/nanopi-neo/patches/linux-headers/linux-headers.hash rename to board/olimex/a10_olinuxino/patches/linux-headers/linux-headers.hash diff --git a/board/olimex/a10_olinuxino/patches/linux/linux.hash b/board/olimex/a10_olinuxino/patches/linux/linux.hash new file mode 100644 index 00000000000..f83883b936d --- /dev/null +++ b/board/olimex/a10_olinuxino/patches/linux/linux.hash @@ -0,0 +1,2 @@ +# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc +sha256 37f0c5d5c242c1d604e87d48f08795e861a5a85f725b4ca11d0a538f12ff8cff linux-6.18.8.tar.xz diff --git a/board/olimex/a10_olinuxino/patches/uboot/uboot.hash b/board/olimex/a10_olinuxino/patches/uboot/uboot.hash new file mode 100644 index 00000000000..b6a925ea4e8 --- /dev/null +++ b/board/olimex/a10_olinuxino/patches/uboot/uboot.hash @@ -0,0 +1,2 @@ +# Locally calculated +sha256 b60d5865cefdbc75da8da4156c56c458e00de75a49b80c1a2e58a96e30ad0d54 u-boot-2026.01.tar.bz2 diff --git a/board/olimex/a10_olinuxino/post-build.sh b/board/olimex/a10_olinuxino/post-build.sh deleted file mode 120000 index b3468960242..00000000000 --- a/board/olimex/a10_olinuxino/post-build.sh +++ /dev/null @@ -1 +0,0 @@ -../a20_olinuxino/post-build.sh \ No newline at end of file diff --git a/board/olimex/a10_olinuxino/rootfs_overlay/boot/extlinux/extlinux.conf b/board/olimex/a10_olinuxino/rootfs_overlay/boot/extlinux/extlinux.conf new file mode 100644 index 00000000000..24a3e18b5c7 --- /dev/null +++ b/board/olimex/a10_olinuxino/rootfs_overlay/boot/extlinux/extlinux.conf @@ -0,0 +1,4 @@ +label A10-Olinuxino + kernel /boot/zImage + fdtdir /boot + append console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait panic=10 ${extra} diff --git a/board/olimex/a13_olinuxino/boot.cmd b/board/olimex/a13_olinuxino/boot.cmd deleted file mode 100644 index 4dd1c7b754a..00000000000 --- a/board/olimex/a13_olinuxino/boot.cmd +++ /dev/null @@ -1,7 +0,0 @@ -setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait - -mmc dev 0 -fatload mmc 0 $kernel_addr_r zImage -fatload mmc 0 $fdt_addr_r sun5i-a13-olinuxino.dtb - -bootz $kernel_addr_r - $fdt_addr_r diff --git a/board/olimex/a13_olinuxino/genimage.cfg b/board/olimex/a13_olinuxino/genimage.cfg index 4eb14eb520f..92c86775456 100644 --- a/board/olimex/a13_olinuxino/genimage.cfg +++ b/board/olimex/a13_olinuxino/genimage.cfg @@ -1,15 +1,3 @@ -image boot.vfat { - vfat { - files = { - "zImage", - "sun5i-a13-olinuxino.dtb", - "boot.scr" - } - } - - size = 64M -} - image sdcard.img { hdimage { } @@ -21,12 +9,6 @@ image sdcard.img { size = 1016K # 1MB - 8KB } - partition boot { - partition-type = 0xC - bootable = "true" - image = "boot.vfat" - } - partition rootfs { partition-type = 0x83 image = "rootfs.ext4" diff --git a/board/pine64/rockpro64-ebbr/patches/linux-headers/linux-headers.hash b/board/olimex/a13_olinuxino/patches/linux-headers/linux-headers.hash similarity index 100% rename from board/pine64/rockpro64-ebbr/patches/linux-headers/linux-headers.hash rename to board/olimex/a13_olinuxino/patches/linux-headers/linux-headers.hash diff --git a/board/olimex/a13_olinuxino/patches/linux/linux.hash b/board/olimex/a13_olinuxino/patches/linux/linux.hash new file mode 100644 index 00000000000..f83883b936d --- /dev/null +++ b/board/olimex/a13_olinuxino/patches/linux/linux.hash @@ -0,0 +1,2 @@ +# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc +sha256 37f0c5d5c242c1d604e87d48f08795e861a5a85f725b4ca11d0a538f12ff8cff linux-6.18.8.tar.xz diff --git a/board/olimex/a13_olinuxino/patches/uboot/uboot.hash b/board/olimex/a13_olinuxino/patches/uboot/uboot.hash new file mode 100644 index 00000000000..b6a925ea4e8 --- /dev/null +++ b/board/olimex/a13_olinuxino/patches/uboot/uboot.hash @@ -0,0 +1,2 @@ +# Locally calculated +sha256 b60d5865cefdbc75da8da4156c56c458e00de75a49b80c1a2e58a96e30ad0d54 u-boot-2026.01.tar.bz2 diff --git a/board/olimex/a13_olinuxino/post-build.sh b/board/olimex/a13_olinuxino/post-build.sh deleted file mode 100755 index aa2a76bddec..00000000000 --- a/board/olimex/a13_olinuxino/post-build.sh +++ /dev/null @@ -1,7 +0,0 @@ -#!/bin/sh - -MKIMAGE=$HOST_DIR/bin/mkimage - -$MKIMAGE -A arm -O linux -T script -C none \ - -d board/olimex/a13_olinuxino/boot.cmd \ - ${BINARIES_DIR}/boot.scr diff --git a/board/olimex/a13_olinuxino/rootfs_overlay/boot/extlinux/extlinux.conf b/board/olimex/a13_olinuxino/rootfs_overlay/boot/extlinux/extlinux.conf new file mode 100644 index 00000000000..f852b75a443 --- /dev/null +++ b/board/olimex/a13_olinuxino/rootfs_overlay/boot/extlinux/extlinux.conf @@ -0,0 +1,4 @@ +label A13-Olinuxino + kernel /boot/zImage + fdtdir /boot + append console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait panic=10 ${extra} diff --git a/board/olimex/a20_olinuxino/boot.cmd b/board/olimex/a20_olinuxino/boot.cmd deleted file mode 100644 index 44d9239a947..00000000000 --- a/board/olimex/a20_olinuxino/boot.cmd +++ /dev/null @@ -1,5 +0,0 @@ -setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait panic=10 ${extra} -ext4load mmc 0 0x49000000 /boot/${fdtfile} -ext4load mmc 0 0x46000000 /boot/zImage -env set fdt_high ffffffff -bootz 0x46000000 - 0x49000000 diff --git a/board/olimex/a20_olinuxino/patches/linux/linux.hash b/board/olimex/a20_olinuxino/patches/linux/linux.hash index 49740ece9df..f83883b936d 100644 --- a/board/olimex/a20_olinuxino/patches/linux/linux.hash +++ b/board/olimex/a20_olinuxino/patches/linux/linux.hash @@ -1,2 +1,2 @@ -# Locally computed -sha256 4a168aed2de5a81aadd90ba2b153860a98d99bfc34651936e17f18e54f01ba8c linux-6.12.36.tar.xz +# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc +sha256 37f0c5d5c242c1d604e87d48f08795e861a5a85f725b4ca11d0a538f12ff8cff linux-6.18.8.tar.xz diff --git a/board/olimex/a20_olinuxino/patches/uboot/uboot.hash b/board/olimex/a20_olinuxino/patches/uboot/uboot.hash index 30246a7cd6d..60971ee74f0 100644 --- a/board/olimex/a20_olinuxino/patches/uboot/uboot.hash +++ b/board/olimex/a20_olinuxino/patches/uboot/uboot.hash @@ -1,2 +1,2 @@ # Locally computed -sha256 0f933f6c5a426895bf306e93e6ac53c60870e4b54cda56d95211bec99e63bec7 u-boot-2025.07.tar.bz2 +sha256 b60d5865cefdbc75da8da4156c56c458e00de75a49b80c1a2e58a96e30ad0d54 u-boot-2026.01.tar.bz2 diff --git a/board/olimex/a20_olinuxino/post-build.sh b/board/olimex/a20_olinuxino/post-build.sh deleted file mode 100755 index d3f612f8118..00000000000 --- a/board/olimex/a20_olinuxino/post-build.sh +++ /dev/null @@ -1,3 +0,0 @@ -#!/bin/sh - -cp $BINARIES_DIR/boot.scr $TARGET_DIR/boot/boot.scr diff --git a/board/olimex/a20_olinuxino/rootfs_overlay/boot/extlinux/extlinux.conf b/board/olimex/a20_olinuxino/rootfs_overlay/boot/extlinux/extlinux.conf index 358bda056bf..d74fcb0a753 100644 --- a/board/olimex/a20_olinuxino/rootfs_overlay/boot/extlinux/extlinux.conf +++ b/board/olimex/a20_olinuxino/rootfs_overlay/boot/extlinux/extlinux.conf @@ -1,4 +1,4 @@ -label Olinuxino +label A20-Olinuxino kernel /boot/zImage fdtdir /boot - append console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait panic=10 drm_kms_helper.drm_leak_fbdev_smem=1 drm_kms_helper.drm_fbdev_overalloc=200 ${extra} + append console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait panic=10 ${extra} diff --git a/board/olimex/a20_olinuxino/rootfs_overlay_mali/boot/extlinux/extlinux.conf b/board/olimex/a20_olinuxino/rootfs_overlay_mali/boot/extlinux/extlinux.conf new file mode 100644 index 00000000000..358bda056bf --- /dev/null +++ b/board/olimex/a20_olinuxino/rootfs_overlay_mali/boot/extlinux/extlinux.conf @@ -0,0 +1,4 @@ +label Olinuxino + kernel /boot/zImage + fdtdir /boot + append console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait panic=10 drm_kms_helper.drm_leak_fbdev_smem=1 drm_kms_helper.drm_fbdev_overalloc=200 ${extra} diff --git a/board/olimex/a33_olinuxino/boot.cmd b/board/olimex/a33_olinuxino/boot.cmd deleted file mode 100644 index 44d9239a947..00000000000 --- a/board/olimex/a33_olinuxino/boot.cmd +++ /dev/null @@ -1,5 +0,0 @@ -setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait panic=10 ${extra} -ext4load mmc 0 0x49000000 /boot/${fdtfile} -ext4load mmc 0 0x46000000 /boot/zImage -env set fdt_high ffffffff -bootz 0x46000000 - 0x49000000 diff --git a/board/pine64/rockpro64/patches/linux-headers/linux-headers.hash b/board/olimex/a33_olinuxino/patches/linux-headers/linux-headers.hash similarity index 100% rename from board/pine64/rockpro64/patches/linux-headers/linux-headers.hash rename to board/olimex/a33_olinuxino/patches/linux-headers/linux-headers.hash diff --git a/board/olimex/a33_olinuxino/patches/linux/linux.hash b/board/olimex/a33_olinuxino/patches/linux/linux.hash new file mode 100644 index 00000000000..f83883b936d --- /dev/null +++ b/board/olimex/a33_olinuxino/patches/linux/linux.hash @@ -0,0 +1,2 @@ +# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc +sha256 37f0c5d5c242c1d604e87d48f08795e861a5a85f725b4ca11d0a538f12ff8cff linux-6.18.8.tar.xz diff --git a/board/olimex/a33_olinuxino/patches/uboot/uboot.hash b/board/olimex/a33_olinuxino/patches/uboot/uboot.hash new file mode 100644 index 00000000000..b6a925ea4e8 --- /dev/null +++ b/board/olimex/a33_olinuxino/patches/uboot/uboot.hash @@ -0,0 +1,2 @@ +# Locally calculated +sha256 b60d5865cefdbc75da8da4156c56c458e00de75a49b80c1a2e58a96e30ad0d54 u-boot-2026.01.tar.bz2 diff --git a/board/olimex/a33_olinuxino/post-build.sh b/board/olimex/a33_olinuxino/post-build.sh deleted file mode 100755 index b418120652d..00000000000 --- a/board/olimex/a33_olinuxino/post-build.sh +++ /dev/null @@ -1,2 +0,0 @@ -#!/bin/sh -cp $BINARIES_DIR/boot.scr $TARGET_DIR/boot/boot.scr diff --git a/board/olimex/a33_olinuxino/rootfs_overlay/boot/extlinux/extlinux.conf b/board/olimex/a33_olinuxino/rootfs_overlay/boot/extlinux/extlinux.conf new file mode 100644 index 00000000000..f852b75a443 --- /dev/null +++ b/board/olimex/a33_olinuxino/rootfs_overlay/boot/extlinux/extlinux.conf @@ -0,0 +1,4 @@ +label A13-Olinuxino + kernel /boot/zImage + fdtdir /boot + append console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait panic=10 ${extra} diff --git a/board/olimex/a64-olinuxino/boot.cmd b/board/olimex/a64-olinuxino/boot.cmd deleted file mode 100644 index 28ed6d9dc9a..00000000000 --- a/board/olimex/a64-olinuxino/boot.cmd +++ /dev/null @@ -1,6 +0,0 @@ -setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait - -fatload mmc 0 $kernel_addr_r Image -fatload mmc 0 $fdt_addr_r sun50i-a64-olinuxino.dtb - -booti $kernel_addr_r - $fdt_addr_r diff --git a/board/olimex/a64-olinuxino/genimage.cfg b/board/olimex/a64-olinuxino/genimage.cfg index ac59e915d9b..f6adbb18818 100644 --- a/board/olimex/a64-olinuxino/genimage.cfg +++ b/board/olimex/a64-olinuxino/genimage.cfg @@ -1,15 +1,3 @@ -image boot.vfat { - vfat { - files = { - "Image", - "sun50i-a64-olinuxino.dtb", - "boot.scr" - } - } - - size = 64M -} - image sdcard.img { hdimage { } @@ -21,12 +9,6 @@ image sdcard.img { size = 1032K # 1MB - 8KB + 16KB(GPT) } - partition boot { - partition-type = 0xC - bootable = "true" - image = "boot.vfat" - } - partition rootfs { partition-type = 0x83 image = "rootfs.ext4" diff --git a/board/xilinx/patches/linux-headers/linux-headers.hash b/board/olimex/a64-olinuxino/patches/linux-headers/linux-headers.hash similarity index 100% rename from board/xilinx/patches/linux-headers/linux-headers.hash rename to board/olimex/a64-olinuxino/patches/linux-headers/linux-headers.hash diff --git a/board/olimex/a64-olinuxino/patches/linux/linux.hash b/board/olimex/a64-olinuxino/patches/linux/linux.hash new file mode 100644 index 00000000000..f83883b936d --- /dev/null +++ b/board/olimex/a64-olinuxino/patches/linux/linux.hash @@ -0,0 +1,2 @@ +# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc +sha256 37f0c5d5c242c1d604e87d48f08795e861a5a85f725b4ca11d0a538f12ff8cff linux-6.18.8.tar.xz diff --git a/board/olimex/a64-olinuxino/patches/uboot/uboot.hash b/board/olimex/a64-olinuxino/patches/uboot/uboot.hash new file mode 100644 index 00000000000..b6a925ea4e8 --- /dev/null +++ b/board/olimex/a64-olinuxino/patches/uboot/uboot.hash @@ -0,0 +1,2 @@ +# Locally calculated +sha256 b60d5865cefdbc75da8da4156c56c458e00de75a49b80c1a2e58a96e30ad0d54 u-boot-2026.01.tar.bz2 diff --git a/board/olimex/a64-olinuxino/rootfs_overlay/boot/extlinux/extlinux.conf b/board/olimex/a64-olinuxino/rootfs_overlay/boot/extlinux/extlinux.conf new file mode 100644 index 00000000000..6a5a0886665 --- /dev/null +++ b/board/olimex/a64-olinuxino/rootfs_overlay/boot/extlinux/extlinux.conf @@ -0,0 +1,4 @@ +label A64-Olinuxino + kernel /boot/zImage + fdtdir /boot + append console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait panic=10 ${extra} diff --git a/board/openblocks/a6/patches/linux/linux.hash b/board/openblocks/a6/patches/linux/linux.hash index b207306a2b1..aa432012b03 100644 --- a/board/openblocks/a6/patches/linux/linux.hash +++ b/board/openblocks/a6/patches/linux/linux.hash @@ -1,2 +1,3 @@ # Locally calculated sha256 0820fdb7971c6974338081c11fbf2dc869870501e7bdcac4d0ed58ba1f57b61c linux-4.14.336.tar.xz +sha256 af8067302947c01fd9eee72befa54c7e3ef8a48fecde7fd71277f2290b2bf0f7 COPYING diff --git a/board/pc/linux.config b/board/pc/linux.config index 43b15c94be4..cbc4f5a6b0e 100644 --- a/board/pc/linux.config +++ b/board/pc/linux.config @@ -5,6 +5,7 @@ CONFIG_SMP=y CONFIG_HYPERVISOR_GUEST=y CONFIG_PARAVIRT=y CONFIG_EFI=y +CONFIG_EFI_STUB=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y diff --git a/board/pc/patches/linux-headers/linux-headers.hash b/board/pc/patches/linux-headers/linux-headers.hash new file mode 120000 index 00000000000..5808d92afe8 --- /dev/null +++ b/board/pc/patches/linux-headers/linux-headers.hash @@ -0,0 +1 @@ +../linux/linux.hash \ No newline at end of file diff --git a/board/pc/patches/linux/linux.hash b/board/pc/patches/linux/linux.hash new file mode 100644 index 00000000000..bf565408ee3 --- /dev/null +++ b/board/pc/patches/linux/linux.hash @@ -0,0 +1,2 @@ +# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc +sha256 e82fe40871743048226987bd349ef107168b15aab90140e872ca4ed470922e25 linux-6.12.47.tar.xz diff --git a/board/pine64/pine64/patches/arm-trusted-firmware/arm-trusted-firmware.hash b/board/pine64/pine64/patches/arm-trusted-firmware/arm-trusted-firmware.hash new file mode 100644 index 00000000000..649ae8df44b --- /dev/null +++ b/board/pine64/pine64/patches/arm-trusted-firmware/arm-trusted-firmware.hash @@ -0,0 +1,3 @@ +# Locally calculated +sha256 3ab7e90d6fc3364815ad7770d7aa7af9cfd68edde43da7123f5f38f80e034c44 arm-trusted-firmware-lts-v2.12.1-git4.tar.gz +sha256 b2c79635797bafcde84c6edadadde290b9d5e05deb3ea16a847210fd2ca83669 docs/license.rst diff --git a/board/pine64/pine64/patches/linux/linux.hash b/board/pine64/pine64/patches/linux/linux.hash new file mode 100644 index 00000000000..e810c7aa768 --- /dev/null +++ b/board/pine64/pine64/patches/linux/linux.hash @@ -0,0 +1,7 @@ +# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc +sha256 067dadd445578284ea6158f312f7970d8940fed3e094dbe49cff66d188d3bda4 linux-6.18.32.tar.xz + +# Locally calculated +sha256 fb5a425bd3b3cd6071a3a9aff9909a859e7c1158d54d32e07658398cd67eb6a0 COPYING +sha256 8780e78a1a737e127f25a65f6d95269bffd36158dc261114de7859b490bfc5aa LICENSES/preferred/GPL-2.0 +sha256 8e378ab93586eb55135d3bc119cce787f7324f48394777d00c34fa3d0be3303f LICENSES/exceptions/Linux-syscall-note diff --git a/board/pine64/pine64/patches/uboot/uboot.hash b/board/pine64/pine64/patches/uboot/uboot.hash new file mode 100644 index 00000000000..d20ea615768 --- /dev/null +++ b/board/pine64/pine64/patches/uboot/uboot.hash @@ -0,0 +1,3 @@ +# Locally calculated +sha256 ac7c04b8b7004923b00a4e5d6699c5df4d21233bac9fda690d8cfbc209fff2fd u-boot-2026.04.tar.bz2 +sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 Licenses/gpl-2.0.txt diff --git a/board/pine64/pinecube/patches/linux/linux.hash b/board/pine64/pinecube/patches/linux/linux.hash new file mode 100644 index 00000000000..788483030c1 --- /dev/null +++ b/board/pine64/pinecube/patches/linux/linux.hash @@ -0,0 +1,2 @@ +# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc +sha256 6f16ff302599f6fe34742890322cf0775703105fbd8767449682fca6af0fb782 linux-6.18.33.tar.xz diff --git a/board/pine64/pinecube/patches/uboot/uboot.hash b/board/pine64/pinecube/patches/uboot/uboot.hash new file mode 100644 index 00000000000..36322a6a904 --- /dev/null +++ b/board/pine64/pinecube/patches/uboot/uboot.hash @@ -0,0 +1,2 @@ +# Locally calculated +sha256 ac7c04b8b7004923b00a4e5d6699c5df4d21233bac9fda690d8cfbc209fff2fd u-boot-2026.04.tar.bz2 diff --git a/board/pine64/rockpro64-ebbr/patches/arm-trusted-firmware/arm-trusted-firmware.hash b/board/pine64/rockpro64-ebbr/patches/arm-trusted-firmware/arm-trusted-firmware.hash index b5898cba3f9..0bf70b55422 100644 --- a/board/pine64/rockpro64-ebbr/patches/arm-trusted-firmware/arm-trusted-firmware.hash +++ b/board/pine64/rockpro64-ebbr/patches/arm-trusted-firmware/arm-trusted-firmware.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 06b35a3596b8417bf66f7bfdd7acd181bcb53fc36dc13216227b5cae154e0219 arm-trusted-firmware-v2.12-git4.tar.gz +sha256 6fd749e53c455aec3418288630544e7552bbffab4442ddc48b20ebef9aee87ff arm-trusted-firmware-v2.14-git4.tar.gz diff --git a/board/pine64/rockpro64-ebbr/patches/linux/linux.hash b/board/pine64/rockpro64-ebbr/patches/linux/linux.hash index 7635b8ccb37..5810d3d580f 100644 --- a/board/pine64/rockpro64-ebbr/patches/linux/linux.hash +++ b/board/pine64/rockpro64-ebbr/patches/linux/linux.hash @@ -1,2 +1,2 @@ # From https://cdn.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc -sha256 beb902a5f69d9e57710112203db38111dad6d30556ea8ce389284c8077fe944d linux-6.12.18.tar.xz +sha256 f850139ca5f79c1bf6bb8b32f92e212aadca97bdaef8a83a7cf4ac4d6a525fab linux-6.18.4.tar.xz diff --git a/board/pine64/rockpro64-ebbr/patches/optee-client/optee-client.hash b/board/pine64/rockpro64-ebbr/patches/optee-client/optee-client.hash index e1f486e7a5e..6c61615dbe6 100644 --- a/board/pine64/rockpro64-ebbr/patches/optee-client/optee-client.hash +++ b/board/pine64/rockpro64-ebbr/patches/optee-client/optee-client.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 ac6dc2c0c253ea228ea230e537211a45475771050faf4e66fe64321de3a0a652 optee-client-4.5.0.tar.gz +sha256 464b3bf5bc4a61830357dbf81a0e5b89414d3bca1c2a752570cb0e40d2f1e637 optee-client-4.8.0.tar.gz diff --git a/board/pine64/rockpro64-ebbr/patches/optee-os/optee-os.hash b/board/pine64/rockpro64-ebbr/patches/optee-os/optee-os.hash index 3e981c142d8..80b30de9ead 100644 --- a/board/pine64/rockpro64-ebbr/patches/optee-os/optee-os.hash +++ b/board/pine64/rockpro64-ebbr/patches/optee-os/optee-os.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 43c389f0505e8bc21d6fbaa8ea83ec67d1746ed14a537e3f505cd0e5b4cc2db9 optee-os-4.5.0.tar.gz +sha256 5222cd553f5edb69ae4ec7cb99b2bfec2c47a47c0be1865b49744701918e8b4d optee-os-4.8.0.tar.gz diff --git a/board/pine64/rockpro64-ebbr/patches/uboot/uboot.hash b/board/pine64/rockpro64-ebbr/patches/uboot/uboot.hash index 50674352d71..b6a925ea4e8 100644 --- a/board/pine64/rockpro64-ebbr/patches/uboot/uboot.hash +++ b/board/pine64/rockpro64-ebbr/patches/uboot/uboot.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 cdef7d507c93f1bbd9f015ea9bc21fa074268481405501945abc6f854d5b686f u-boot-2025.01.tar.bz2 +sha256 b60d5865cefdbc75da8da4156c56c458e00de75a49b80c1a2e58a96e30ad0d54 u-boot-2026.01.tar.bz2 diff --git a/board/pine64/rockpro64/patches/arm-trusted-firmware/arm-trusted-firmware.hash b/board/pine64/rockpro64/patches/arm-trusted-firmware/arm-trusted-firmware.hash index 8b77e1f1653..0bf70b55422 100644 --- a/board/pine64/rockpro64/patches/arm-trusted-firmware/arm-trusted-firmware.hash +++ b/board/pine64/rockpro64/patches/arm-trusted-firmware/arm-trusted-firmware.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 c0f23ccc71c49989e9ad238acf334473c17b7c88f79a20c829c3d443e3794a22 arm-trusted-firmware-v2.11-git4.tar.gz +sha256 6fd749e53c455aec3418288630544e7552bbffab4442ddc48b20ebef9aee87ff arm-trusted-firmware-v2.14-git4.tar.gz diff --git a/board/pine64/rockpro64/patches/linux/linux.hash b/board/pine64/rockpro64/patches/linux/linux.hash index 396c18dd5c7..5810d3d580f 100644 --- a/board/pine64/rockpro64/patches/linux/linux.hash +++ b/board/pine64/rockpro64/patches/linux/linux.hash @@ -1,2 +1,2 @@ # From https://cdn.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc -sha256 55e5bcbc68d66776fc46896291f0a24844beb57817345a854d65e3d055fa423e linux-6.10.14.tar.xz +sha256 f850139ca5f79c1bf6bb8b32f92e212aadca97bdaef8a83a7cf4ac4d6a525fab linux-6.18.4.tar.xz diff --git a/board/pine64/rockpro64/patches/uboot/uboot.hash b/board/pine64/rockpro64/patches/uboot/uboot.hash index 904fa56c02a..b6a925ea4e8 100644 --- a/board/pine64/rockpro64/patches/uboot/uboot.hash +++ b/board/pine64/rockpro64/patches/uboot/uboot.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 b28daf4ac17e43156363078bf510297584137f6df50fced9b12df34f61a92fb0 u-boot-2024.10.tar.bz2 +sha256 b60d5865cefdbc75da8da4156c56c458e00de75a49b80c1a2e58a96e30ad0d54 u-boot-2026.01.tar.bz2 diff --git a/board/pine64/rockpro64/readme.txt b/board/pine64/rockpro64/readme.txt index de86970104d..d2a865670a8 100644 --- a/board/pine64/rockpro64/readme.txt +++ b/board/pine64/rockpro64/readme.txt @@ -20,7 +20,6 @@ output/images ├── rk3399-rockpro64.dtb ├── rootfs.ext2 ├── rootfs.ext4 -> rootfs.ext2 -├── rootfs.tar ├── sdcard.img ├── u-boot.bin └── u-boot.itb diff --git a/board/pine64/star64/genimage.cfg b/board/pine64/star64/genimage.cfg index 74940016f4c..20326710c5c 100644 --- a/board/pine64/star64/genimage.cfg +++ b/board/pine64/star64/genimage.cfg @@ -12,8 +12,8 @@ image sdcard.img { } partition uboot { - image = "opensbi_uboot_payload.img" - partition-type-uuid = 5B193300-FC78-40CD-8002-E86C45580B47 + image = "u-boot.itb" + partition-type-uuid = xbootldr offset = 4M } diff --git a/board/pine64/star64/overlay/boot/extlinux/extlinux.conf b/board/pine64/star64/overlay/boot/extlinux/extlinux.conf index db7cfb7b8b2..4a76fc16242 100644 --- a/board/pine64/star64/overlay/boot/extlinux/extlinux.conf +++ b/board/pine64/star64/overlay/boot/extlinux/extlinux.conf @@ -1,4 +1,4 @@ label star64 kernel /boot/Image devicetree /boot/jh7110-pine64-star64.dtb - append root=/dev/mmcblk1p3 earlycon=sbi + append root=/dev/mmcblk1p3 rootwait earlycon=sbi diff --git a/board/pine64/star64/patches/linux/linux.hash b/board/pine64/star64/patches/linux/linux.hash new file mode 100644 index 00000000000..8549cf10373 --- /dev/null +++ b/board/pine64/star64/patches/linux/linux.hash @@ -0,0 +1,2 @@ +# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc +sha256 165ca1c37c4607b90e731996b7c1e3311285167d13deeedf08f3f1f0b9d2541a linux-6.12.57.tar.xz diff --git a/board/pine64/star64/patches/uboot/uboot.hash b/board/pine64/star64/patches/uboot/uboot.hash new file mode 100644 index 00000000000..98a5c53aaf9 --- /dev/null +++ b/board/pine64/star64/patches/uboot/uboot.hash @@ -0,0 +1,2 @@ +# Locally calculated +sha256 b4f032848e56cc8f213ad59f9132c084dbbb632bc29176d024e58220e0efdf4a u-boot-2025.10.tar.bz2 diff --git a/board/pine64/star64/post-build.sh b/board/pine64/star64/post-build.sh deleted file mode 100755 index ed0a6ebd520..00000000000 --- a/board/pine64/star64/post-build.sh +++ /dev/null @@ -1,9 +0,0 @@ -#!/bin/bash -BOARD_DIR="$CONFIG_DIR"/board/pine64/star64 - -# Add header to the SPL -"$HOST_DIR"/bin/spl_tool -c -f "$BINARIES_DIR"/u-boot-spl.bin - -# Create the u-boot FIT image -cp "$BOARD_DIR"/star64-uboot-fit-image.its "$BINARIES_DIR" -mkimage -f "$BINARIES_DIR"/star64-uboot-fit-image.its -A riscv -O u-boot -T firmware "$BINARIES_DIR"/opensbi_uboot_payload.img diff --git a/board/pine64/star64/star64-uboot-fit-image.its b/board/pine64/star64/star64-uboot-fit-image.its deleted file mode 100644 index 08f603163a9..00000000000 --- a/board/pine64/star64/star64-uboot-fit-image.its +++ /dev/null @@ -1,29 +0,0 @@ -/dts-v1/; - -/ { - description = "U-boot-spl FIT image for JH7110 Pine64 Star64"; - #address-cells = <2>; - - images { - firmware { - description = "u-boot"; - data = /incbin/("fw_payload.bin"); - type = "firmware"; - arch = "riscv"; - os = "u-boot"; - load = <0x0 0x40000000>; - entry = <0x0 0x40000000>; - compression = "none"; - }; - }; - - configurations { - default = "config-1"; - - config-1 { - description = "U-boot-spl FIT config for JH7110 Pine64 Star64"; - firmware = "firmware"; - }; - }; -}; - diff --git a/board/qemu/aarch64-sbsa/readme.txt b/board/qemu/aarch64-sbsa/readme.txt index 7d97d7f6ab4..acba9808a02 100644 --- a/board/qemu/aarch64-sbsa/readme.txt +++ b/board/qemu/aarch64-sbsa/readme.txt @@ -17,7 +17,7 @@ Run the emulation with: qemu-system-aarch64 \ -M sbsa-ref \ - -cpu neoverse-n1 \ + -cpu neoverse-n2 \ -smp 4 \ -m 1024 \ -nographic \ diff --git a/board/qemu/arm-vexpress-tz/u-boot.config b/board/qemu/arm-vexpress-tz/u-boot.config index 48b1d06fdbb..8633ea18d0e 100644 --- a/board/qemu/arm-vexpress-tz/u-boot.config +++ b/board/qemu/arm-vexpress-tz/u-boot.config @@ -1,5 +1,5 @@ CONFIG_SYS_TEXT_BASE=0x60000000 -CONFIG_BOOTCOMMAND="smhload zImage ${kernel_addr_r} && smhload rootfs.cpio.uboot ${ramdisk_addr_r} && setenv bootargs console=ttyAMA0,115200 earlyprintk=serial,ttyAMA0,115200 && bootz ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr}" +CONFIG_BOOTCOMMAND="load hostfs - ${kernel_addr_r} zImage && load hostfs - ${ramdisk_addr_r} rootfs.cpio.uboot && setenv bootargs console=ttyAMA0,115200 earlyprintk=serial,ttyAMA0,115200 && bootz ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr}" CONFIG_SEMIHOSTING=y # Drop flash accesses CONFIG_ENV_IS_IN_FLASH=n diff --git a/board/qemu/hppa-b160l/readme.txt b/board/qemu/hppa-b160l/readme.txt new file mode 100644 index 00000000000..052ca9b8483 --- /dev/null +++ b/board/qemu/hppa-b160l/readme.txt @@ -0,0 +1,33 @@ +Introduction +============ + +The qemu_hppa_b160l_defconfig is meant to run Linux on a HP Visualize B160L +PA-RISC Workstation[1], emulated with Qemu. + +Building +======== + + $ make qemu_hppa_b160l_defconfig + $ make + +Generated files under output/images: + +* rootfs.ext4: the root filesystem. +* vmlinux: the Linux kernel. + +Running under Qemu +================== + +Run the emulation with: + + qemu-system-hppa \ + -machine B160L \ + -append "rootwait root=/dev/sda" \ + -hda output/images/rootfs.ext4 \ + -kernel output/images/vmlinux \ + -nographic \ + -smp 2 # qemu_hppa_b160l_defconfig + +The login prompt will appear in the terminal that started Qemu. + +[1] https://www.openpa.net/systems/hp-visualize_b132l_b160l_b180l.html diff --git a/board/qemu/microblazeel-mmu/readme.txt b/board/qemu/microblazeel-mmu/readme.txt index 20fa0072ed1..4d1e6606505 100644 --- a/board/qemu/microblazeel-mmu/readme.txt +++ b/board/qemu/microblazeel-mmu/readme.txt @@ -1,5 +1,5 @@ Run the emulation with: - qemu-system-microblazeel -M petalogix-s3adsp1800 -kernel output/images/linux.bin -serial stdio # qemu_microblazeel_mmu_defconfig + qemu-system-microblaze -M petalogix-s3adsp1800,endianness=little -kernel output/images/linux.bin -serial stdio # qemu_microblazeel_mmu_defconfig The login prompt will appear in the terminal that started Qemu. diff --git a/board/qemu/patches/linux/0001-mips-Add-std-flag-specified-in-KBUILD_CFLAGS-to-vdso.patch b/board/qemu/patches/linux/0001-mips-Add-std-flag-specified-in-KBUILD_CFLAGS-to-vdso.patch deleted file mode 100644 index 630fcf6315d..00000000000 --- a/board/qemu/patches/linux/0001-mips-Add-std-flag-specified-in-KBUILD_CFLAGS-to-vdso.patch +++ /dev/null @@ -1,52 +0,0 @@ -From c94606e06b54bc7b909fb342aa8dae732b50f5cd Mon Sep 17 00:00:00 2001 -From: Khem Raj -Date: Sat, 29 Mar 2025 08:39:03 -0700 -Subject: [PATCH] mips: Add -std= flag specified in KBUILD_CFLAGS to vdso - CFLAGS - -GCC 15 changed the default C standard dialect from gnu17 to gnu23, -which should not have impacted the kernel because it explicitly requests -the gnu11 standard in the main Makefile. However, mips/vdso code uses -its own CFLAGS without a '-std=' value, which break with this dialect -change because of the kernel's own definitions of bool, false, and true -conflicting with the C23 reserved keywords. - - include/linux/stddef.h:11:9: error: cannot use keyword 'false' as enumeration constant - 11 | false = 0, - | ^~~~~ - include/linux/stddef.h:11:9: note: 'false' is a keyword with '-std=c23' onwards - include/linux/types.h:35:33: error: 'bool' cannot be defined via 'typedef' - 35 | typedef _Bool bool; - | ^~~~ - include/linux/types.h:35:33: note: 'bool' is a keyword with '-std=c23' onwards - -Add -std as specified in KBUILD_CFLAGS to the decompressor and purgatory -CFLAGS to eliminate these errors and make the C standard version of these -areas match the rest of the kernel. - -Upstream: https://git.kernel.org/pub/scm/linux/kernel/git/mips/linux.git/commit/?id=0f4ae7c6ecb89bfda026d210dcf8216fb67d2333 - -Signed-off-by: Khem Raj -Cc: stable@vger.kernel.org -Signed-off-by: Thomas Bogendoerfer -[Romain: backport to 6.12.27] -Signed-off-by: Romain Naour ---- - arch/mips/vdso/Makefile | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/arch/mips/vdso/Makefile b/arch/mips/vdso/Makefile -index b289b2c1b294..c729bd687804 100644 ---- a/arch/mips/vdso/Makefile -+++ b/arch/mips/vdso/Makefile -@@ -27,6 +27,7 @@ endif - # offsets. - cflags-vdso := $(ccflags-vdso) \ - $(filter -W%,$(filter-out -Wa$(comma)%,$(KBUILD_CFLAGS))) \ -+ $(filter -std=%,$(KBUILD_CFLAGS)) \ - -O3 -g -fPIC -fno-strict-aliasing -fno-common -fno-builtin -G 0 \ - -mrelax-pic-calls $(call cc-option, -mexplicit-relocs) \ - -fno-stack-protector -fno-jump-tables -DDISABLE_BRANCH_PROFILING \ --- -2.49.0 - diff --git a/board/qemu/patches/linux/0002-powerpc-boot-Fix-build-with-gcc-15.patch b/board/qemu/patches/linux/0002-powerpc-boot-Fix-build-with-gcc-15.patch deleted file mode 100644 index 78a4034a321..00000000000 --- a/board/qemu/patches/linux/0002-powerpc-boot-Fix-build-with-gcc-15.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 2d04c5b3c5728cd5e5202176e8796ffc0085c24a Mon Sep 17 00:00:00 2001 -From: Michal Suchanek -Date: Mon, 31 Mar 2025 12:57:19 +0200 -Subject: [PATCH] powerpc/boot: Fix build with gcc 15 - -Similar to x86 the ppc boot code does not build with GCC 15. - -Copy the fix from -commit ee2ab467bddf ("x86/boot: Use '-std=gnu11' to fix build with GCC 15") - -Upstream: https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux.git/commit/?h=next-test&id=5a821e2d69e26b51b7f3740b6b0c3462b8cacaff - -Signed-off-by: Michal Suchanek -Tested-by: Amit Machhiwal -Tested-by: Venkat Rao Bagalkote -Signed-off-by: Madhavan Srinivasan -Link: https://patch.msgid.link/20250331105722.19709-1-msuchanek@suse.de -[Romain: backport to 6.12.27] -Signed-off-by: Romain Naour ---- - arch/powerpc/boot/Makefile | 1 + - 1 file changed, 1 insertion(+) - -diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile -index fa8518067d38..60a495771c05 100644 ---- a/arch/powerpc/boot/Makefile -+++ b/arch/powerpc/boot/Makefile -@@ -70,6 +70,7 @@ BOOTCPPFLAGS := -nostdinc $(LINUXINCLUDE) - BOOTCPPFLAGS += -isystem $(shell $(BOOTCC) -print-file-name=include) - - BOOTCFLAGS := $(BOOTTARGETFLAGS) \ -+ -std=gnu11 \ - -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \ - -fno-strict-aliasing -O2 \ - -msoft-float -mno-altivec -mno-vsx \ --- -2.49.0 - diff --git a/board/qemu/patches/linux/linux.hash b/board/qemu/patches/linux/linux.hash index 48552f63e3e..3c689260bb0 100644 --- a/board/qemu/patches/linux/linux.hash +++ b/board/qemu/patches/linux/linux.hash @@ -1,5 +1,5 @@ -# sha256 locally computed -sha256 8f4655a4cc7f93d72f515bbca54756de26ddaf5949790da6a17f766e3c33dc79 linux-6.12.27.tar.xz +# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc +sha256 b726a4d15cf9ae06219b56d87820776e34d89fbc137e55fb54a9b9c3015b8f1e linux-6.18.7.tar.xz # sha256 locally computed sha256 a76052c0c71d4025b117dcfc18ca7e189ac495a7645fa98c1bdaddca15cce815 xtensa_dc233c.tar.gz diff --git a/board/qemu/patches/uboot/uboot.hash b/board/qemu/patches/uboot/uboot.hash index 7762ff3f8f9..594d7ebeae6 100644 --- a/board/qemu/patches/uboot/uboot.hash +++ b/board/qemu/patches/uboot/uboot.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 68e065413926778e276ec3abd28bb32fa82abaa4a6898d570c1f48fbdb08bcd0 u-boot-2022.04.tar.bz2 sha256 b99611f1ed237bf3541bdc8434b68c96a6e05967061f992443cb30aabebef5b3 u-boot-2024.01.tar.bz2 +sha256 ac7c04b8b7004923b00a4e5d6699c5df4d21233bac9fda690d8cfbc209fff2fd u-boot-2026.04.tar.bz2 diff --git a/board/qemu/ppc64le-powernv10/readme.txt b/board/qemu/ppc64le-powernv10/readme.txt new file mode 100644 index 00000000000..9ac60a2cae2 --- /dev/null +++ b/board/qemu/ppc64le-powernv10/readme.txt @@ -0,0 +1,14 @@ +Run the emulation with: + +qemu-system-ppc64 \ + -M powernv10 \ + -kernel output/images/vmlinux \ + -append "console=hvc0 rootwait root=/dev/nvme0n1" \ + -device nvme,bus=pcie.3,addr=0x0,drive=drive0,serial=1234 \ + -drive file=output/images/rootfs.ext2,if=none,id=drive0,format=raw,cache=none \ + -device e1000e,netdev=net0,mac=C0:FF:EE:00:01:03,bus=pcie.1,addr=0x0 \ + -netdev user,id=net0 \ + -serial mon:stdio \ + -nographic # qemu_ppc64le_powernv10_defconfig + +The login prompt will appear in the terminal window. diff --git a/board/qemu/ppc64le-powernv11/readme.txt b/board/qemu/ppc64le-powernv11/readme.txt new file mode 100644 index 00000000000..368bad0264c --- /dev/null +++ b/board/qemu/ppc64le-powernv11/readme.txt @@ -0,0 +1,14 @@ +Run the emulation with: + +qemu-system-ppc64 \ + -M powernv11 \ + -kernel output/images/vmlinux \ + -append "console=hvc0 rootwait root=/dev/nvme0n1" \ + -device nvme,bus=pcie.3,addr=0x0,drive=drive0,serial=1234 \ + -drive file=output/images/rootfs.ext2,if=none,id=drive0,format=raw,cache=none \ + -device e1000e,netdev=net0,mac=C0:FF:EE:00:01:03,bus=pcie.1,addr=0x0 \ + -netdev user,id=net0 \ + -serial mon:stdio \ + -nographic # qemu_ppc64le_powernv11_defconfig + +The login prompt will appear in the terminal window. diff --git a/board/qemu/x86/post-build.sh b/board/qemu/x86/post-build.sh index bf83a002c2f..24eee7f0e53 100755 --- a/board/qemu/x86/post-build.sh +++ b/board/qemu/x86/post-build.sh @@ -4,8 +4,8 @@ set -u set -e # Add a console on tty1 -if [ -e ${TARGET_DIR}/etc/inittab ]; then - grep -qE '^tty1::' ${TARGET_DIR}/etc/inittab || \ +if [ -e "${TARGET_DIR}/etc/inittab" ]; then + grep -qE '^tty1::' "${TARGET_DIR}/etc/inittab" || \ sed -i '/GENERIC_SERIAL/a\ -tty1::respawn:/sbin/getty -L tty1 0 vt100 # QEMU graphical window' ${TARGET_DIR}/etc/inittab +tty1::respawn:/sbin/getty -L tty1 0 vt100 # QEMU graphical window' "${TARGET_DIR}/etc/inittab" fi diff --git a/board/qemu/x86_64-efi/genimage.cfg.in b/board/qemu/x86_64-efi/genimage.cfg.in new file mode 100644 index 00000000000..0d50ed2ba4d --- /dev/null +++ b/board/qemu/x86_64-efi/genimage.cfg.in @@ -0,0 +1,32 @@ +image efi-part.vfat { + vfat { + file EFI { + image = "efi-part/EFI" + } + + file bzImage { + image = "bzImage" + } + } + + size = 16352K # 16MB - 32KB +} + +image disk.img { + hdimage { + partition-table-type = "gpt" + } + + partition boot { + image = "efi-part.vfat" + partition-type-uuid = U + offset = 32K + bootable = true + } + + partition root { + partition-type-uuid = root-x86-64 + partition-uuid = %PARTUUID% + image = "rootfs.ext2" + } +} diff --git a/board/qemu/x86_64-efi/grub.cfg.in b/board/qemu/x86_64-efi/grub.cfg.in new file mode 100644 index 00000000000..16a1b17516e --- /dev/null +++ b/board/qemu/x86_64-efi/grub.cfg.in @@ -0,0 +1,6 @@ +set default="0" +set timeout="5" + +menuentry "Buildroot" { + linux /bzImage root=PARTUUID=%PARTUUID% rootwait console=tty1 console=ttyS0 +} diff --git a/board/qemu/x86_64-efi/linux.config b/board/qemu/x86_64-efi/linux.config new file mode 100644 index 00000000000..4f5f0b386d2 --- /dev/null +++ b/board/qemu/x86_64-efi/linux.config @@ -0,0 +1,60 @@ +CONFIG_SYSVIPC=y +CONFIG_SMP=y +CONFIG_HYPERVISOR_GUEST=y +CONFIG_PARAVIRT=y +CONFIG_EFI=y +CONFIG_EFI_STUB=y +# CONFIG_GCC_PLUGINS is not set +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +# CONFIG_WIRELESS is not set +CONFIG_PCI=y +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_VIRTIO_BLK=y +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_VIRTIO=y +CONFIG_ATA=y +CONFIG_ATA_PIIX=y +CONFIG_NETDEVICES=y +CONFIG_VIRTIO_NET=y +CONFIG_NE2K_PCI=y +CONFIG_8139CP=y +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_VIRTIO_CONSOLE=y +CONFIG_HW_RANDOM_VIRTIO=m +CONFIG_DRM=y +CONFIG_DRM_I915=y +CONFIG_DRM_QXL=y +CONFIG_DRM_VIRTIO_GPU=y +CONFIG_DRM_BOCHS=y +CONFIG_FB=y +CONFIG_FB_VESA=y +CONFIG_FB_EFI=y +CONFIG_FIRMWARE_EDID=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_HDA_INTEL=y +CONFIG_SND_HDA_GENERIC=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_UHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_VIRTIO_PCI=y +CONFIG_VIRTIO_BALLOON=y +CONFIG_VIRTIO_INPUT=y +CONFIG_VIRTIO_MMIO=y +CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y +CONFIG_EXT4_FS=y +CONFIG_FUSE_FS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_SQUASHFS=y +CONFIG_UNWINDER_FRAME_POINTER=y diff --git a/board/qemu/x86_64-efi/post-build.sh b/board/qemu/x86_64-efi/post-build.sh new file mode 100755 index 00000000000..24eee7f0e53 --- /dev/null +++ b/board/qemu/x86_64-efi/post-build.sh @@ -0,0 +1,11 @@ +#!/bin/sh + +set -u +set -e + +# Add a console on tty1 +if [ -e "${TARGET_DIR}/etc/inittab" ]; then + grep -qE '^tty1::' "${TARGET_DIR}/etc/inittab" || \ + sed -i '/GENERIC_SERIAL/a\ +tty1::respawn:/sbin/getty -L tty1 0 vt100 # QEMU graphical window' "${TARGET_DIR}/etc/inittab" +fi diff --git a/board/qemu/x86_64-efi/post-image.sh b/board/qemu/x86_64-efi/post-image.sh new file mode 100755 index 00000000000..119d7aca8fa --- /dev/null +++ b/board/qemu/x86_64-efi/post-image.sh @@ -0,0 +1,8 @@ +#!/bin/sh + +BOARD_DIR="$(dirname "$0")" + +PARTUUID=$(dumpe2fs "${BINARIES_DIR}/rootfs.ext2" 2>/dev/null | sed -n 's/^Filesystem UUID: *\(.*\)/\1/p') +sed "s/%PARTUUID%/$PARTUUID/g" "${BOARD_DIR}/grub.cfg.in" > "${BINARIES_DIR}/efi-part/EFI/BOOT/grub.cfg" +sed "s/%PARTUUID%/$PARTUUID/g" "${BOARD_DIR}/genimage.cfg.in" > "${BINARIES_DIR}/genimage.cfg" +support/scripts/genimage.sh -c "${BINARIES_DIR}/genimage.cfg" diff --git a/board/qemu/x86_64-efi/readme.txt b/board/qemu/x86_64-efi/readme.txt new file mode 100644 index 00000000000..7f69be065f0 --- /dev/null +++ b/board/qemu/x86_64-efi/readme.txt @@ -0,0 +1,28 @@ +Intro +===== + +This is a x86_64 UEFI Linux boot demo in QEMU virt machine. + +Build +===== + + make qemu_x86_64_efi_defconfig + make + +Emulation +========= + +Run the emulation with: + + qemu-system-x86_64 \ + -M pc \ + -m 1024 \ + -serial stdio \ + -bios output/images/OVMF.fd \ + -drive file=output/images/disk.img,format=raw \ + -netdev user,id=net0 \ + -device virtio-net-pci,netdev=net0 # qemu_x86_64_efi_defconfig + +Optionally add -smp N to emulate a SMP system with N CPUs. + +The login prompt will appear in the graphical window. diff --git a/board/qemu/x86_64/post-build.sh b/board/qemu/x86_64/post-build.sh index bf83a002c2f..24eee7f0e53 100755 --- a/board/qemu/x86_64/post-build.sh +++ b/board/qemu/x86_64/post-build.sh @@ -4,8 +4,8 @@ set -u set -e # Add a console on tty1 -if [ -e ${TARGET_DIR}/etc/inittab ]; then - grep -qE '^tty1::' ${TARGET_DIR}/etc/inittab || \ +if [ -e "${TARGET_DIR}/etc/inittab" ]; then + grep -qE '^tty1::' "${TARGET_DIR}/etc/inittab" || \ sed -i '/GENERIC_SERIAL/a\ -tty1::respawn:/sbin/getty -L tty1 0 vt100 # QEMU graphical window' ${TARGET_DIR}/etc/inittab +tty1::respawn:/sbin/getty -L tty1 0 vt100 # QEMU graphical window' "${TARGET_DIR}/etc/inittab" fi diff --git a/board/qemu/xtensa-lx60/patches/linux/0001-xtensa-disable-SSP-when-needed.patch b/board/qemu/xtensa-lx60/patches/linux/0001-xtensa-disable-SSP-when-needed.patch new file mode 100644 index 00000000000..cc193481400 --- /dev/null +++ b/board/qemu/xtensa-lx60/patches/linux/0001-xtensa-disable-SSP-when-needed.patch @@ -0,0 +1,36 @@ +From 5358d4e20801ffbb1c0834eab36c003049d4055f Mon Sep 17 00:00:00 2001 +From: Romain Naour +Date: Sun, 16 Aug 2026 22:27:28 +0200 +Subject: [PATCH] xtensa: disable SSP when needed + +-fno-stack-protector must be passed to avoid linking errors related to +undefined references to '__stack_chk_guard' and '__stack_chk_fail' if +toolchain enforces -fstack-protector. + +Fixes: +https://gitlab.com/buildroot.org/toolchains-builder/-/jobs/15876432953 + +Upstream: Submitted to Max Filippov via email for initial review. + +Cc: Max Filippov +Signed-off-by: Romain Naour +--- + arch/xtensa/boot/Makefile | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/arch/xtensa/boot/Makefile b/arch/xtensa/boot/Makefile +index d8b0fadf429a9..dfb758cdb2756 100644 +--- a/arch/xtensa/boot/Makefile ++++ b/arch/xtensa/boot/Makefile +@@ -9,7 +9,7 @@ + + + # KBUILD_CFLAGS used when building rest of boot (takes effect recursively) +-KBUILD_CFLAGS += -fno-builtin ++KBUILD_CFLAGS += -fno-builtin -fno-stack-protector + + subdir-y := lib + targets += vmlinux.bin vmlinux.bin.gz +-- +2.55.0 + diff --git a/board/radxa/rock4se/patches/linux/linux.hash b/board/radxa/rock4se/patches/linux/linux.hash index 8ad0e7d8c00..f83883b936d 100644 --- a/board/radxa/rock4se/patches/linux/linux.hash +++ b/board/radxa/rock4se/patches/linux/linux.hash @@ -1,2 +1,2 @@ # From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc -sha256 e8a099182562aecff781de72ce769461e706d97af42d740dff20eb450dd5771e linux-6.12.28.tar.xz +sha256 37f0c5d5c242c1d604e87d48f08795e861a5a85f725b4ca11d0a538f12ff8cff linux-6.18.8.tar.xz diff --git a/board/radxa/rock4se/patches/uboot/uboot.hash b/board/radxa/rock4se/patches/uboot/uboot.hash index 80ea21b7cb4..b6a925ea4e8 100644 --- a/board/radxa/rock4se/patches/uboot/uboot.hash +++ b/board/radxa/rock4se/patches/uboot/uboot.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 439d3bef296effd54130be6a731c5b118be7fddd7fcc663ccbc5fb18294d8718 u-boot-2025.04.tar.bz2 +sha256 b60d5865cefdbc75da8da4156c56c458e00de75a49b80c1a2e58a96e30ad0d54 u-boot-2026.01.tar.bz2 diff --git a/board/raspberrypi/boot.scr.in b/board/raspberrypi/boot.scr.in new file mode 100644 index 00000000000..1ba733ceaa7 --- /dev/null +++ b/board/raspberrypi/boot.scr.in @@ -0,0 +1,18 @@ +# Please note that this is only a sample, we recommend you to change +# it to fit your needs. You should override this file using +# BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE. + +# On most Raspberry Pi boards UART0 is ttyAMA0, Raspberry Pi 5 is +# different. +if test "$board_name" = "5 Model B"; then + env set serial_uart "ttyAMA10,115200" +else + env set serial_uart "ttyAMA0,115200" +fi +env set bootargs "root=/dev/mmcblk0p2 rootwait console=tty1 console=${serial_uart}" + +# load kernel from the root partition +load mmc 0:2 ${kernel_addr_r} boot/Image + +# boot using the FDT provided by firmware +booti ${kernel_addr_r} - ${fdt_addr} diff --git a/board/raspberrypi/config_cm4io_64bit_uboot.txt b/board/raspberrypi/config_cm4io_64bit_uboot.txt new file mode 100644 index 00000000000..eef929186c0 --- /dev/null +++ b/board/raspberrypi/config_cm4io_64bit_uboot.txt @@ -0,0 +1,23 @@ +# Please note that this is only a sample, we recommend you to change it to fit +# your needs. +# You should override this file using BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE. +# See http://buildroot.org/manual.html#rootfs-custom +# and http://elinux.org/RPiconfig for a description of config.txt syntax + +start_file=start4.elf +fixup_file=fixup4.dat + +kernel=u-boot.bin + +# Enable UART0 for serial console on ttyAMA0 +dtoverlay=miniuart-bt + +# enable RTC +dtparam=i2c_vc=on +dtoverlay=i2c-rtc,pcf85063a,i2c_csi_dsi + +# enable dwc2 USB controller (USB 2.0) +dtoverlay=dwc2,dr_mode=host + +# enable 64bits support +arm_64bit=1 diff --git a/board/raspberrypi/patches/linux/linux.hash b/board/raspberrypi/patches/linux/linux.hash index 51b0684b20e..fedfd9d4c97 100644 --- a/board/raspberrypi/patches/linux/linux.hash +++ b/board/raspberrypi/patches/linux/linux.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 afc44e2899a3c32a1b968272a5816e5c90bea346341153807553396621e65dde linux-ac69f097e1fba94502cbd36278db204120a37943.tar.gz +sha256 7c31df8061aae748a6e72417bfe743a54198fb5bdc96e229ecc605dc621d32ef linux-21b410140c47ffab5668399f6f143c7d7b935c8b.tar.gz diff --git a/board/raspberrypi/post-image.sh b/board/raspberrypi/post-image.sh index 9b9eac972ba..a3a2d8d6205 100755 --- a/board/raspberrypi/post-image.sh +++ b/board/raspberrypi/post-image.sh @@ -13,12 +13,20 @@ if [ ! -e "${GENIMAGE_CFG}" ]; then FILES=() for i in "${BINARIES_DIR}"/*.dtb "${BINARIES_DIR}"/rpi-firmware/*; do + # ignore literal globs that didn't match anything + [ -e "${i}" ] || continue FILES+=( "${i#${BINARIES_DIR}/}" ) done KERNEL=$(sed -n 's/^kernel=//p' "${BINARIES_DIR}/rpi-firmware/config.txt") FILES+=( "${KERNEL}" ) + # If config.txt calls for running U-Boot, include the boot + # script if any. + if [ "${KERNEL}" = "u-boot.bin" ] && [ -e "${BINARIES_DIR}/boot.scr" ]; then + FILES+=( "boot.scr" ) + fi + BOOT_FILES=$(printf '\\t\\t\\t"%s",\\n' "${FILES[@]}") sed "s|#BOOT_FILES#|${BOOT_FILES}|" "${BOARD_DIR}/genimage.cfg.in" \ > "${GENIMAGE_CFG}" diff --git a/board/raspberrypi/readme.txt b/board/raspberrypi/readme.txt index 31ff424a837..8e1009f2545 100644 --- a/board/raspberrypi/readme.txt +++ b/board/raspberrypi/readme.txt @@ -83,6 +83,10 @@ or for CM4 (on IO Board - 64 bit): $ make raspberrypicm4io_64_defconfig +or to boot CM4 (on IO Board - 64 bit) using U-Boot: + + $ make raspberrypicm4io_64_uboot_defconfig + For model 5 B and 500: $ make raspberrypi5_defconfig diff --git a/board/roseapplepi/genimage.cfg b/board/roseapplepi/genimage.cfg deleted file mode 100644 index 4c5a8de9020..00000000000 --- a/board/roseapplepi/genimage.cfg +++ /dev/null @@ -1,45 +0,0 @@ -# Minimal SD card image for the Roseapple Pi -# -image boot.vfat { - vfat { - files = { - "uEnv.txt", - "uImage" - } - - file kernel.dtb { - image = "owl-s500-roseapplepi.dtb" - } - } - - size = 128M -} - -image sdcard.img { - hdimage { - } - - partition s500-bootloader { - in-partition-table = "no" - image = "s500-bootloader.bin" - offset = 0x200200 # 2MB + 512B - } - - partition u-boot { - in-partition-table = "no" - image = "u-boot-dtb.img" - offset = 3M - } - - partition boot { - partition-type = 0xC - bootable = "true" - image = "boot.vfat" - } - - partition rootfs { - partition-type = 0x83 - image = "rootfs.ext4" - size = 512M - } -} diff --git a/board/roseapplepi/linux.config b/board/roseapplepi/linux.config deleted file mode 100644 index 89e7c8917f1..00000000000 --- a/board/roseapplepi/linux.config +++ /dev/null @@ -1,70 +0,0 @@ -# CONFIG_SWAP is not set -# CONFIG_CROSS_MEMORY_ATTACH is not set -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -# CONFIG_CPU_ISOLATION is not set -# CONFIG_KALLSYMS is not set -# CONFIG_RSEQ is not set -CONFIG_EMBEDDED=y -# CONFIG_SLUB_DEBUG is not set -# CONFIG_COMPAT_BRK is not set -CONFIG_ARCH_ACTIONS=y -CONFIG_SMP=y -CONFIG_ARM_PSCI=y -CONFIG_HIGHMEM=y -CONFIG_VFP=y -CONFIG_NEON=y -# CONFIG_SUSPEND is not set -# CONFIG_STACKPROTECTOR is not set -# CONFIG_MQ_IOSCHED_KYBER is not set -# CONFIG_COREDUMP is not set -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -# CONFIG_WIRELESS is not set -# CONFIG_ETHTOOL_NETLINK is not set -CONFIG_NETDEVICES=y -CONFIG_OWL_EMAC=y -CONFIG_REALTEK_PHY=y -CONFIG_INPUT_EVDEV=y -CONFIG_INPUT_MISC=y -CONFIG_INPUT_ATC260X_ONKEY=y -# CONFIG_VT is not set -CONFIG_SERIAL_OWL=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_OWL=y -CONFIG_PINCTRL=y -CONFIG_PINCTRL_OWL=y -CONFIG_PINCTRL_S500=y -CONFIG_POWER_RESET=y -CONFIG_POWER_RESET_ATC260X=y -CONFIG_MFD_ATC260X_I2C=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y -CONFIG_REGULATOR_ATC260X=y -# CONFIG_HID is not set -# CONFIG_USB_SUPPORT is not set -CONFIG_MMC=y -CONFIG_MMC_OWL=y -CONFIG_DMADEVICES=y -CONFIG_OWL_DMA=y -# CONFIG_VIRTIO_MENU is not set -# CONFIG_VHOST_MENU is not set -# CONFIG_IOMMU_SUPPORT is not set -CONFIG_EXT4_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -# CONFIG_MISC_FILESYSTEMS is not set -# CONFIG_NETWORK_FILESYSTEMS is not set -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set -# CONFIG_CRYPTO_HW is not set -# CONFIG_FTRACE is not set -# CONFIG_RUNTIME_TESTING_MENU is not set diff --git a/board/roseapplepi/patches/uboot/0001-compiler-.h-sync-include-linux-compiler-.h-with-Linu.patch b/board/roseapplepi/patches/uboot/0001-compiler-.h-sync-include-linux-compiler-.h-with-Linu.patch deleted file mode 100644 index ae19a490312..00000000000 --- a/board/roseapplepi/patches/uboot/0001-compiler-.h-sync-include-linux-compiler-.h-with-Linu.patch +++ /dev/null @@ -1,809 +0,0 @@ -From 9b2c282b348dfe966bbba967dc7a45ce817cce50 Mon Sep 17 00:00:00 2001 -From: Tom Rini -Date: Mon, 29 Feb 2016 11:34:15 -0500 -Subject: [PATCH] compiler*.h: sync include/linux/compiler*.h with Linux - 4.5-rc6 - -Copy these from Linux v4.5-rc6 tag. - -This is needed so that we can keep up with newer gcc versions. Note -that we don't have the uapi/ hierarchy from the kernel so continue to -use - -Signed-off-by: Tom Rini -Signed-off-by: Peter Korsgaard ---- - include/linux/compiler-gcc.h | 259 ++++++++++++++++++++++++++++++++--------- - include/linux/compiler-gcc3.h | 23 ---- - include/linux/compiler-gcc4.h | 88 -------------- - include/linux/compiler-gcc5.h | 65 ----------- - include/linux/compiler-intel.h | 5 + - include/linux/compiler.h | 178 ++++++++++++++++++++++++++-- - 6 files changed, 383 insertions(+), 235 deletions(-) - delete mode 100644 include/linux/compiler-gcc3.h - delete mode 100644 include/linux/compiler-gcc4.h - delete mode 100644 include/linux/compiler-gcc5.h - -diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h -index e057bd2a84..22ab246fee 100644 ---- a/include/linux/compiler-gcc.h -+++ b/include/linux/compiler-gcc.h -@@ -5,14 +5,28 @@ - /* - * Common definitions for all gcc versions go here. - */ --#define GCC_VERSION (__GNUC__ * 10000 \ -- + __GNUC_MINOR__ * 100 \ -- + __GNUC_PATCHLEVEL__) -- -+#define GCC_VERSION (__GNUC__ * 10000 \ -+ + __GNUC_MINOR__ * 100 \ -+ + __GNUC_PATCHLEVEL__) - - /* Optimization barrier */ -+ - /* The "volatile" is due to gcc bugs */ - #define barrier() __asm__ __volatile__("": : :"memory") -+/* -+ * This version is i.e. to prevent dead stores elimination on @ptr -+ * where gcc and llvm may behave differently when otherwise using -+ * normal barrier(): while gcc behavior gets along with a normal -+ * barrier(), llvm needs an explicit input variable to be assumed -+ * clobbered. The issue is as follows: while the inline asm might -+ * access any memory it wants, the compiler could have fit all of -+ * @ptr into memory registers instead, and since @ptr never escaped -+ * from that, it proofed that the inline asm wasn't touching any of -+ * it. This version works well with both compilers, i.e. we're telling -+ * the compiler that the inline asm absolutely may see the contents -+ * of @ptr. See also: https://llvm.org/bugs/show_bug.cgi?id=15495 -+ */ -+#define barrier_data(ptr) __asm__ __volatile__("": :"r"(ptr) :"memory") - - /* - * This macro obfuscates arithmetic on a variable address so that gcc -@@ -32,58 +46,63 @@ - * the inline assembly constraint from =g to =r, in this particular - * case either is valid. - */ --#define RELOC_HIDE(ptr, off) \ -- ({ unsigned long __ptr; \ -- __asm__ ("" : "=r"(__ptr) : "0"(ptr)); \ -- (typeof(ptr)) (__ptr + (off)); }) -+#define RELOC_HIDE(ptr, off) \ -+({ \ -+ unsigned long __ptr; \ -+ __asm__ ("" : "=r"(__ptr) : "0"(ptr)); \ -+ (typeof(ptr)) (__ptr + (off)); \ -+}) - - /* Make the optimizer believe the variable can be manipulated arbitrarily. */ --#define OPTIMIZER_HIDE_VAR(var) __asm__ ("" : "=r" (var) : "0" (var)) -+#define OPTIMIZER_HIDE_VAR(var) \ -+ __asm__ ("" : "=r" (var) : "0" (var)) - - #ifdef __CHECKER__ --#define __must_be_array(arr) 0 -+#define __must_be_array(a) 0 - #else - /* &a[0] degrades to a pointer: a different type from an array */ --#define __must_be_array(a) BUILD_BUG_ON_ZERO(__same_type((a), &(a)[0])) -+#define __must_be_array(a) BUILD_BUG_ON_ZERO(__same_type((a), &(a)[0])) - #endif - - /* - * Force always-inline if the user requests it so via the .config, - * or if gcc is too old: - */ --#if !defined(CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING) || \ -+#if !defined(CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING) || \ - !defined(CONFIG_OPTIMIZE_INLINING) || (__GNUC__ < 4) --# define inline inline __attribute__((always_inline)) notrace --# define __inline__ __inline__ __attribute__((always_inline)) notrace --# define __inline __inline __attribute__((always_inline)) notrace -+#define inline inline __attribute__((always_inline)) notrace -+#define __inline__ __inline__ __attribute__((always_inline)) notrace -+#define __inline __inline __attribute__((always_inline)) notrace - #else - /* A lot of inline functions can cause havoc with function tracing */ --# define inline inline notrace --# define __inline__ __inline__ notrace --# define __inline __inline notrace -+#define inline inline notrace -+#define __inline__ __inline__ notrace -+#define __inline __inline notrace - #endif - --#define __deprecated __attribute__((deprecated)) --#ifndef __packed --#define __packed __attribute__((packed)) --#endif --#ifndef __weak --#define __weak __attribute__((weak)) --#endif -+#define __always_inline inline __attribute__((always_inline)) -+#define noinline __attribute__((noinline)) -+ -+#define __deprecated __attribute__((deprecated)) -+#define __packed __attribute__((packed)) -+#define __weak __attribute__((weak)) -+#define __alias(symbol) __attribute__((alias(#symbol))) - - /* -- * it doesn't make sense on ARM (currently the only user of __naked) to trace -- * naked functions because then mcount is called without stack and frame pointer -- * being set up and there is no chance to restore the lr register to the value -- * before mcount was called. -+ * it doesn't make sense on ARM (currently the only user of __naked) -+ * to trace naked functions because then mcount is called without -+ * stack and frame pointer being set up and there is no chance to -+ * restore the lr register to the value before mcount was called. -+ * -+ * The asm() bodies of naked functions often depend on standard calling -+ * conventions, therefore they must be noinline and noclone. - * -- * The asm() bodies of naked functions often depend on standard calling conventions, -- * therefore they must be noinline and noclone. GCC 4.[56] currently fail to enforce -- * this, so we must do so ourselves. See GCC PR44290. -+ * GCC 4.[56] currently fail to enforce this, so we must do so ourselves. -+ * See GCC PR44290. - */ --#define __naked __attribute__((naked)) noinline __noclone notrace -+#define __naked __attribute__((naked)) noinline __noclone notrace - --#define __noreturn __attribute__((noreturn)) -+#define __noreturn __attribute__((noreturn)) - - /* - * From the GCC manual: -@@ -95,34 +114,170 @@ - * would be. - * [...] - */ --#ifndef __pure --#define __pure __attribute__((pure)) -+#define __pure __attribute__((pure)) -+#define __aligned(x) __attribute__((aligned(x))) -+#define __printf(a, b) __attribute__((format(printf, a, b))) -+#define __scanf(a, b) __attribute__((format(scanf, a, b))) -+#define __attribute_const__ __attribute__((__const__)) -+#define __maybe_unused __attribute__((unused)) -+#define __always_unused __attribute__((unused)) -+ -+/* gcc version specific checks */ -+ -+#if GCC_VERSION < 30200 -+# error Sorry, your compiler is too old - please upgrade it. -+#endif -+ -+#if GCC_VERSION < 30300 -+# define __used __attribute__((__unused__)) -+#else -+# define __used __attribute__((__used__)) -+#endif -+ -+#ifdef CONFIG_GCOV_KERNEL -+# if GCC_VERSION < 30400 -+# error "GCOV profiling support for gcc versions below 3.4 not included" -+# endif /* __GNUC_MINOR__ */ -+#endif /* CONFIG_GCOV_KERNEL */ -+ -+#if GCC_VERSION >= 30400 -+#define __must_check __attribute__((warn_unused_result)) -+#endif -+ -+#if GCC_VERSION >= 40000 -+ -+/* GCC 4.1.[01] miscompiles __weak */ -+#ifdef __KERNEL__ -+# if GCC_VERSION >= 40100 && GCC_VERSION <= 40101 -+# error Your version of gcc miscompiles the __weak directive -+# endif -+#endif -+ -+#define __used __attribute__((__used__)) -+#define __compiler_offsetof(a, b) \ -+ __builtin_offsetof(a, b) -+ -+#if GCC_VERSION >= 40100 && GCC_VERSION < 40600 -+# define __compiletime_object_size(obj) __builtin_object_size(obj, 0) -+#endif -+ -+#if GCC_VERSION >= 40300 -+/* Mark functions as cold. gcc will assume any path leading to a call -+ * to them will be unlikely. This means a lot of manual unlikely()s -+ * are unnecessary now for any paths leading to the usual suspects -+ * like BUG(), printk(), panic() etc. [but let's keep them for now for -+ * older compilers] -+ * -+ * Early snapshots of gcc 4.3 don't support this and we can't detect this -+ * in the preprocessor, but we can live with this because they're unreleased. -+ * Maketime probing would be overkill here. -+ * -+ * gcc also has a __attribute__((__hot__)) to move hot functions into -+ * a special section, but I don't see any sense in this right now in -+ * the kernel context -+ */ -+#define __cold __attribute__((__cold__)) -+ -+#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__) -+ -+#ifndef __CHECKER__ -+# define __compiletime_warning(message) __attribute__((warning(message))) -+# define __compiletime_error(message) __attribute__((error(message))) -+#endif /* __CHECKER__ */ -+#endif /* GCC_VERSION >= 40300 */ -+ -+#if GCC_VERSION >= 40500 -+/* -+ * Mark a position in code as unreachable. This can be used to -+ * suppress control flow warnings after asm blocks that transfer -+ * control elsewhere. -+ * -+ * Early snapshots of gcc 4.5 don't support this and we can't detect -+ * this in the preprocessor, but we can live with this because they're -+ * unreleased. Really, we need to have autoconf for the kernel. -+ */ -+#define unreachable() __builtin_unreachable() -+ -+/* Mark a function definition as prohibited from being cloned. */ -+#define __noclone __attribute__((__noclone__)) -+ -+#endif /* GCC_VERSION >= 40500 */ -+ -+#if GCC_VERSION >= 40600 -+/* -+ * When used with Link Time Optimization, gcc can optimize away C functions or -+ * variables which are referenced only from assembly code. __visible tells the -+ * optimizer that something else uses this function or variable, thus preventing -+ * this. -+ */ -+#define __visible __attribute__((externally_visible)) - #endif --#ifndef __aligned --#define __aligned(x) __attribute__((aligned(x))) -+ -+ -+#if GCC_VERSION >= 40900 && !defined(__CHECKER__) -+/* -+ * __assume_aligned(n, k): Tell the optimizer that the returned -+ * pointer can be assumed to be k modulo n. The second argument is -+ * optional (default 0), so we use a variadic macro to make the -+ * shorthand. -+ * -+ * Beware: Do not apply this to functions which may return -+ * ERR_PTRs. Also, it is probably unwise to apply it to functions -+ * returning extra information in the low bits (but in that case the -+ * compiler should see some alignment anyway, when the return value is -+ * massaged by 'flags = ptr & 3; ptr &= ~3;'). -+ */ -+#define __assume_aligned(a, ...) __attribute__((__assume_aligned__(a, ## __VA_ARGS__))) - #endif --#define __printf(a, b) __attribute__((format(printf, a, b))) --#define __scanf(a, b) __attribute__((format(scanf, a, b))) --#define noinline __attribute__((noinline)) --#define __attribute_const__ __attribute__((__const__)) --#define __maybe_unused __attribute__((unused)) --#define __always_unused __attribute__((unused)) - --#define __gcc_header(x) #x --#define _gcc_header(x) __gcc_header(linux/compiler-gcc##x.h) --#define gcc_header(x) _gcc_header(x) --#include gcc_header(__GNUC__) -+/* -+ * GCC 'asm goto' miscompiles certain code sequences: -+ * -+ * http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670 -+ * -+ * Work it around via a compiler barrier quirk suggested by Jakub Jelinek. -+ * -+ * (asm goto is automatically volatile - the naming reflects this.) -+ */ -+#define asm_volatile_goto(x...) do { asm goto(x); asm (""); } while (0) -+ -+#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP -+#if GCC_VERSION >= 40400 -+#define __HAVE_BUILTIN_BSWAP32__ -+#define __HAVE_BUILTIN_BSWAP64__ -+#endif -+#if GCC_VERSION >= 40800 || (defined(__powerpc__) && GCC_VERSION >= 40600) -+#define __HAVE_BUILTIN_BSWAP16__ -+#endif -+#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */ -+ -+#if GCC_VERSION >= 50000 -+#define KASAN_ABI_VERSION 4 -+#elif GCC_VERSION >= 40902 -+#define KASAN_ABI_VERSION 3 -+#endif -+ -+#if GCC_VERSION >= 40902 -+/* -+ * Tell the compiler that address safety instrumentation (KASAN) -+ * should not be applied to that function. -+ * Conflicts with inlining: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=67368 -+ */ -+#define __no_sanitize_address __attribute__((no_sanitize_address)) -+#endif -+ -+#endif /* gcc version >= 40000 specific checks */ - - #if !defined(__noclone) - #define __noclone /* not needed */ - #endif - -+#if !defined(__no_sanitize_address) -+#define __no_sanitize_address -+#endif -+ - /* - * A trick to suppress uninitialized variable warning without generating any - * code - */ - #define uninitialized_var(x) x = x -- --#ifndef __always_inline --#define __always_inline inline __attribute__((always_inline)) --#endif -diff --git a/include/linux/compiler-gcc3.h b/include/linux/compiler-gcc3.h -deleted file mode 100644 -index 7d89febe4d..0000000000 ---- a/include/linux/compiler-gcc3.h -+++ /dev/null -@@ -1,23 +0,0 @@ --#ifndef __LINUX_COMPILER_H --#error "Please don't include directly, include instead." --#endif -- --#if GCC_VERSION < 30200 --# error Sorry, your compiler is too old - please upgrade it. --#endif -- --#if GCC_VERSION >= 30300 --# define __used __attribute__((__used__)) --#else --# define __used __attribute__((__unused__)) --#endif -- --#if GCC_VERSION >= 30400 --#define __must_check __attribute__((warn_unused_result)) --#endif -- --#ifdef CONFIG_GCOV_KERNEL --# if GCC_VERSION < 30400 --# error "GCOV profiling support for gcc versions below 3.4 not included" --# endif /* __GNUC_MINOR__ */ --#endif /* CONFIG_GCOV_KERNEL */ -diff --git a/include/linux/compiler-gcc4.h b/include/linux/compiler-gcc4.h -deleted file mode 100644 -index 2507fd2a1e..0000000000 ---- a/include/linux/compiler-gcc4.h -+++ /dev/null -@@ -1,88 +0,0 @@ --#ifndef __LINUX_COMPILER_H --#error "Please don't include directly, include instead." --#endif -- --/* GCC 4.1.[01] miscompiles __weak */ --#ifdef __KERNEL__ --# if GCC_VERSION >= 40100 && GCC_VERSION <= 40101 --# error Your version of gcc miscompiles the __weak directive --# endif --#endif -- --#define __used __attribute__((__used__)) --#define __must_check __attribute__((warn_unused_result)) --#define __compiler_offsetof(a,b) __builtin_offsetof(a,b) -- --#if GCC_VERSION >= 40100 && GCC_VERSION < 40600 --# define __compiletime_object_size(obj) __builtin_object_size(obj, 0) --#endif -- --#if GCC_VERSION >= 40300 --/* Mark functions as cold. gcc will assume any path leading to a call -- to them will be unlikely. This means a lot of manual unlikely()s -- are unnecessary now for any paths leading to the usual suspects -- like BUG(), printk(), panic() etc. [but let's keep them for now for -- older compilers] -- -- Early snapshots of gcc 4.3 don't support this and we can't detect this -- in the preprocessor, but we can live with this because they're unreleased. -- Maketime probing would be overkill here. -- -- gcc also has a __attribute__((__hot__)) to move hot functions into -- a special section, but I don't see any sense in this right now in -- the kernel context */ --#define __cold __attribute__((__cold__)) -- --#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__) -- --#ifndef __CHECKER__ --# define __compiletime_warning(message) __attribute__((warning(message))) --# define __compiletime_error(message) __attribute__((error(message))) --#endif /* __CHECKER__ */ --#endif /* GCC_VERSION >= 40300 */ -- --#if GCC_VERSION >= 40500 --/* -- * Mark a position in code as unreachable. This can be used to -- * suppress control flow warnings after asm blocks that transfer -- * control elsewhere. -- * -- * Early snapshots of gcc 4.5 don't support this and we can't detect -- * this in the preprocessor, but we can live with this because they're -- * unreleased. Really, we need to have autoconf for the kernel. -- */ --#define unreachable() __builtin_unreachable() -- --/* Mark a function definition as prohibited from being cloned. */ --#define __noclone __attribute__((__noclone__)) -- --#endif /* GCC_VERSION >= 40500 */ -- --#if GCC_VERSION >= 40600 --/* -- * Tell the optimizer that something else uses this function or variable. -- */ --#define __visible __attribute__((externally_visible)) --#endif -- --/* -- * GCC 'asm goto' miscompiles certain code sequences: -- * -- * http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670 -- * -- * Work it around via a compiler barrier quirk suggested by Jakub Jelinek. -- * Fixed in GCC 4.8.2 and later versions. -- * -- * (asm goto is automatically volatile - the naming reflects this.) -- */ --#define asm_volatile_goto(x...) do { asm goto(x); asm (""); } while (0) -- --#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP --#if GCC_VERSION >= 40400 --#define __HAVE_BUILTIN_BSWAP32__ --#define __HAVE_BUILTIN_BSWAP64__ --#endif --#if GCC_VERSION >= 40800 || (defined(__powerpc__) && GCC_VERSION >= 40600) --#define __HAVE_BUILTIN_BSWAP16__ --#endif --#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */ -diff --git a/include/linux/compiler-gcc5.h b/include/linux/compiler-gcc5.h -deleted file mode 100644 -index c8c5659525..0000000000 ---- a/include/linux/compiler-gcc5.h -+++ /dev/null -@@ -1,65 +0,0 @@ --#ifndef __LINUX_COMPILER_H --#error "Please don't include directly, include instead." --#endif -- --#define __used __attribute__((__used__)) --#define __must_check __attribute__((warn_unused_result)) --#define __compiler_offsetof(a, b) __builtin_offsetof(a, b) -- --/* Mark functions as cold. gcc will assume any path leading to a call -- to them will be unlikely. This means a lot of manual unlikely()s -- are unnecessary now for any paths leading to the usual suspects -- like BUG(), printk(), panic() etc. [but let's keep them for now for -- older compilers] -- -- Early snapshots of gcc 4.3 don't support this and we can't detect this -- in the preprocessor, but we can live with this because they're unreleased. -- Maketime probing would be overkill here. -- -- gcc also has a __attribute__((__hot__)) to move hot functions into -- a special section, but I don't see any sense in this right now in -- the kernel context */ --#define __cold __attribute__((__cold__)) -- --#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__) -- --#ifndef __CHECKER__ --# define __compiletime_warning(message) __attribute__((warning(message))) --# define __compiletime_error(message) __attribute__((error(message))) --#endif /* __CHECKER__ */ -- --/* -- * Mark a position in code as unreachable. This can be used to -- * suppress control flow warnings after asm blocks that transfer -- * control elsewhere. -- * -- * Early snapshots of gcc 4.5 don't support this and we can't detect -- * this in the preprocessor, but we can live with this because they're -- * unreleased. Really, we need to have autoconf for the kernel. -- */ --#define unreachable() __builtin_unreachable() -- --/* Mark a function definition as prohibited from being cloned. */ --#define __noclone __attribute__((__noclone__)) -- --/* -- * Tell the optimizer that something else uses this function or variable. -- */ --#define __visible __attribute__((externally_visible)) -- --/* -- * GCC 'asm goto' miscompiles certain code sequences: -- * -- * http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670 -- * -- * Work it around via a compiler barrier quirk suggested by Jakub Jelinek. -- * -- * (asm goto is automatically volatile - the naming reflects this.) -- */ --#define asm_volatile_goto(x...) do { asm goto(x); asm (""); } while (0) -- --#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP --#define __HAVE_BUILTIN_BSWAP32__ --#define __HAVE_BUILTIN_BSWAP64__ --#define __HAVE_BUILTIN_BSWAP16__ --#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */ -diff --git a/include/linux/compiler-intel.h b/include/linux/compiler-intel.h -index ba147a1727..d4c71132d0 100644 ---- a/include/linux/compiler-intel.h -+++ b/include/linux/compiler-intel.h -@@ -13,9 +13,14 @@ - /* Intel ECC compiler doesn't support gcc specific asm stmts. - * It uses intrinsics to do the equivalent things. - */ -+#undef barrier -+#undef barrier_data - #undef RELOC_HIDE - #undef OPTIMIZER_HIDE_VAR - -+#define barrier() __memory_barrier() -+#define barrier_data(ptr) barrier() -+ - #define RELOC_HIDE(ptr, off) \ - ({ unsigned long __ptr; \ - __ptr = (unsigned long) (ptr); \ -diff --git a/include/linux/compiler.h b/include/linux/compiler.h -index d5ad7b1118..020ad16a04 100644 ---- a/include/linux/compiler.h -+++ b/include/linux/compiler.h -@@ -17,6 +17,7 @@ - # define __release(x) __context__(x,-1) - # define __cond_lock(x,c) ((c) ? ({ __acquire(x); 1; }) : 0) - # define __percpu __attribute__((noderef, address_space(3))) -+# define __pmem __attribute__((noderef, address_space(5))) - #ifdef CONFIG_SPARSE_RCU_POINTER - # define __rcu __attribute__((noderef, address_space(4))) - #else -@@ -42,6 +43,7 @@ extern void __chk_io_ptr(const volatile void __iomem *); - # define __cond_lock(x,c) (c) - # define __percpu - # define __rcu -+# define __pmem - #endif - - /* Indirect macros required for expanded argument pasting, eg. __LINE__. */ -@@ -54,7 +56,11 @@ extern void __chk_io_ptr(const volatile void __iomem *); - #include - #endif - -+#if defined(CC_USING_HOTPATCH) && !defined(__CHECKER__) -+#define notrace __attribute__((hotpatch(0,0))) -+#else - #define notrace __attribute__((no_instrument_function)) -+#endif - - /* Intel compiler defines __GNUC__. So we will overwrite implementations - * coming from above header files here -@@ -138,7 +144,7 @@ void ftrace_likely_update(struct ftrace_branch_data *f, int val, int expect); - */ - #define if(cond, ...) __trace_if( (cond , ## __VA_ARGS__) ) - #define __trace_if(cond) \ -- if (__builtin_constant_p((cond)) ? !!(cond) : \ -+ if (__builtin_constant_p(!!(cond)) ? !!(cond) : \ - ({ \ - int ______r; \ - static struct ftrace_branch_data \ -@@ -165,6 +171,10 @@ void ftrace_likely_update(struct ftrace_branch_data *f, int val, int expect); - # define barrier() __memory_barrier() - #endif - -+#ifndef barrier_data -+# define barrier_data(ptr) barrier() -+#endif -+ - /* Unreachable code */ - #ifndef unreachable - # define unreachable() do { } while (1) -@@ -186,6 +196,126 @@ void ftrace_likely_update(struct ftrace_branch_data *f, int val, int expect); - # define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __LINE__) - #endif - -+#include -+ -+#define __READ_ONCE_SIZE \ -+({ \ -+ switch (size) { \ -+ case 1: *(__u8 *)res = *(volatile __u8 *)p; break; \ -+ case 2: *(__u16 *)res = *(volatile __u16 *)p; break; \ -+ case 4: *(__u32 *)res = *(volatile __u32 *)p; break; \ -+ case 8: *(__u64 *)res = *(volatile __u64 *)p; break; \ -+ default: \ -+ barrier(); \ -+ __builtin_memcpy((void *)res, (const void *)p, size); \ -+ barrier(); \ -+ } \ -+}) -+ -+static __always_inline -+void __read_once_size(const volatile void *p, void *res, int size) -+{ -+ __READ_ONCE_SIZE; -+} -+ -+#ifdef CONFIG_KASAN -+/* -+ * This function is not 'inline' because __no_sanitize_address confilcts -+ * with inlining. Attempt to inline it may cause a build failure. -+ * https://gcc.gnu.org/bugzilla/show_bug.cgi?id=67368 -+ * '__maybe_unused' allows us to avoid defined-but-not-used warnings. -+ */ -+static __no_sanitize_address __maybe_unused -+void __read_once_size_nocheck(const volatile void *p, void *res, int size) -+{ -+ __READ_ONCE_SIZE; -+} -+#else -+static __always_inline -+void __read_once_size_nocheck(const volatile void *p, void *res, int size) -+{ -+ __READ_ONCE_SIZE; -+} -+#endif -+ -+static __always_inline void __write_once_size(volatile void *p, void *res, int size) -+{ -+ switch (size) { -+ case 1: *(volatile __u8 *)p = *(__u8 *)res; break; -+ case 2: *(volatile __u16 *)p = *(__u16 *)res; break; -+ case 4: *(volatile __u32 *)p = *(__u32 *)res; break; -+ case 8: *(volatile __u64 *)p = *(__u64 *)res; break; -+ default: -+ barrier(); -+ __builtin_memcpy((void *)p, (const void *)res, size); -+ barrier(); -+ } -+} -+ -+/* -+ * Prevent the compiler from merging or refetching reads or writes. The -+ * compiler is also forbidden from reordering successive instances of -+ * READ_ONCE, WRITE_ONCE and ACCESS_ONCE (see below), but only when the -+ * compiler is aware of some particular ordering. One way to make the -+ * compiler aware of ordering is to put the two invocations of READ_ONCE, -+ * WRITE_ONCE or ACCESS_ONCE() in different C statements. -+ * -+ * In contrast to ACCESS_ONCE these two macros will also work on aggregate -+ * data types like structs or unions. If the size of the accessed data -+ * type exceeds the word size of the machine (e.g., 32 bits or 64 bits) -+ * READ_ONCE() and WRITE_ONCE() will fall back to memcpy and print a -+ * compile-time warning. -+ * -+ * Their two major use cases are: (1) Mediating communication between -+ * process-level code and irq/NMI handlers, all running on the same CPU, -+ * and (2) Ensuring that the compiler does not fold, spindle, or otherwise -+ * mutilate accesses that either do not require ordering or that interact -+ * with an explicit memory barrier or atomic instruction that provides the -+ * required ordering. -+ */ -+ -+#define __READ_ONCE(x, check) \ -+({ \ -+ union { typeof(x) __val; char __c[1]; } __u; \ -+ if (check) \ -+ __read_once_size(&(x), __u.__c, sizeof(x)); \ -+ else \ -+ __read_once_size_nocheck(&(x), __u.__c, sizeof(x)); \ -+ __u.__val; \ -+}) -+#define READ_ONCE(x) __READ_ONCE(x, 1) -+ -+/* -+ * Use READ_ONCE_NOCHECK() instead of READ_ONCE() if you need -+ * to hide memory access from KASAN. -+ */ -+#define READ_ONCE_NOCHECK(x) __READ_ONCE(x, 0) -+ -+#define WRITE_ONCE(x, val) \ -+({ \ -+ union { typeof(x) __val; char __c[1]; } __u = \ -+ { .__val = (__force typeof(x)) (val) }; \ -+ __write_once_size(&(x), __u.__c, sizeof(x)); \ -+ __u.__val; \ -+}) -+ -+/** -+ * smp_cond_acquire() - Spin wait for cond with ACQUIRE ordering -+ * @cond: boolean expression to wait for -+ * -+ * Equivalent to using smp_load_acquire() on the condition variable but employs -+ * the control dependency of the wait to reduce the barrier on many platforms. -+ * -+ * The control dependency provides a LOAD->STORE order, the additional RMB -+ * provides LOAD->LOAD order, together they provide LOAD->{LOAD,STORE} order, -+ * aka. ACQUIRE. -+ */ -+#define smp_cond_acquire(cond) do { \ -+ while (!(cond)) \ -+ cpu_relax(); \ -+ smp_rmb(); /* ctrl + rmb := acquire */ \ -+} while (0) -+ - #endif /* __KERNEL__ */ - - #endif /* __ASSEMBLY__ */ -@@ -304,6 +434,14 @@ void ftrace_likely_update(struct ftrace_branch_data *f, int val, int expect); - #define __visible - #endif - -+/* -+ * Assume alignment of return value. -+ */ -+#ifndef __assume_aligned -+#define __assume_aligned(a, ...) -+#endif -+ -+ - /* Are two types/vars the same type (ignoring qualifiers)? */ - #ifndef __same_type - # define __same_type(a, b) __builtin_types_compatible_p(typeof(a), typeof(b)) -@@ -311,7 +449,7 @@ void ftrace_likely_update(struct ftrace_branch_data *f, int val, int expect); - - /* Is this type a native word size -- useful for atomic operations */ - #ifndef __native_word --# define __native_word(t) (sizeof(t) == sizeof(int) || sizeof(t) == sizeof(long)) -+# define __native_word(t) (sizeof(t) == sizeof(char) || sizeof(t) == sizeof(short) || sizeof(t) == sizeof(int) || sizeof(t) == sizeof(long)) - #endif - - /* Compile time object size, -1 for unknown */ -@@ -373,12 +511,38 @@ void ftrace_likely_update(struct ftrace_branch_data *f, int val, int expect); - * to make the compiler aware of ordering is to put the two invocations of - * ACCESS_ONCE() in different C statements. - * -- * This macro does absolutely -nothing- to prevent the CPU from reordering, -- * merging, or refetching absolutely anything at any time. Its main intended -- * use is to mediate communication between process-level code and irq/NMI -- * handlers, all running on the same CPU. -+ * ACCESS_ONCE will only work on scalar types. For union types, ACCESS_ONCE -+ * on a union member will work as long as the size of the member matches the -+ * size of the union and the size is smaller than word size. -+ * -+ * The major use cases of ACCESS_ONCE used to be (1) Mediating communication -+ * between process-level code and irq/NMI handlers, all running on the same CPU, -+ * and (2) Ensuring that the compiler does not fold, spindle, or otherwise -+ * mutilate accesses that either do not require ordering or that interact -+ * with an explicit memory barrier or atomic instruction that provides the -+ * required ordering. -+ * -+ * If possible use READ_ONCE()/WRITE_ONCE() instead. -+ */ -+#define __ACCESS_ONCE(x) ({ \ -+ __maybe_unused typeof(x) __var = (__force typeof(x)) 0; \ -+ (volatile typeof(x) *)&(x); }) -+#define ACCESS_ONCE(x) (*__ACCESS_ONCE(x)) -+ -+/** -+ * lockless_dereference() - safely load a pointer for later dereference -+ * @p: The pointer to load -+ * -+ * Similar to rcu_dereference(), but for situations where the pointed-to -+ * object's lifetime is managed by something other than RCU. That -+ * "something other" might be reference counting or simple immortality. - */ --#define ACCESS_ONCE(x) (*(volatile typeof(x) *)&(x)) -+#define lockless_dereference(p) \ -+({ \ -+ typeof(p) _________p1 = READ_ONCE(p); \ -+ smp_read_barrier_depends(); /* Dependency order vs. p above. */ \ -+ (_________p1); \ -+}) - - /* Ignore/forbid kprobes attach on very low level functions marked by this attribute: */ - #ifdef CONFIG_KPROBES --- -2.11.0 - diff --git a/board/roseapplepi/post-build.sh b/board/roseapplepi/post-build.sh deleted file mode 100755 index ffdd19138c7..00000000000 --- a/board/roseapplepi/post-build.sh +++ /dev/null @@ -1,4 +0,0 @@ -#!/bin/sh -BOARD_DIR="$(dirname $0)" - -cp $BOARD_DIR/uEnv.txt $BINARIES_DIR/uEnv.txt diff --git a/board/roseapplepi/uEnv.txt b/board/roseapplepi/uEnv.txt deleted file mode 100644 index 339eb8aa0a3..00000000000 --- a/board/roseapplepi/uEnv.txt +++ /dev/null @@ -1,3 +0,0 @@ -# no ramdisk -ramdisk_addr_r=- -bootargs=console=ttyOWL2,115200 root=/dev/mmcblk0p2 rootwait clk_ignore_unused diff --git a/board/sheevaplug/patches/linux/linux.hash b/board/sheevaplug/patches/linux/linux.hash index b207306a2b1..aa432012b03 100644 --- a/board/sheevaplug/patches/linux/linux.hash +++ b/board/sheevaplug/patches/linux/linux.hash @@ -1,2 +1,3 @@ # Locally calculated sha256 0820fdb7971c6974338081c11fbf2dc869870501e7bdcac4d0ed58ba1f57b61c linux-4.14.336.tar.xz +sha256 af8067302947c01fd9eee72befa54c7e3ef8a48fecde7fd71277f2290b2bf0f7 COPYING diff --git a/board/sipeed/licheepi_zero/patches/linux/linux.hash b/board/sipeed/licheepi_zero/patches/linux/linux.hash new file mode 100644 index 00000000000..216d9b9d39d --- /dev/null +++ b/board/sipeed/licheepi_zero/patches/linux/linux.hash @@ -0,0 +1,2 @@ +# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc +sha256 0fcbbbbcd456e87bbbfc8bf37af541fda62ccfcce76903503424fd101ef7bdee linux-6.12.43.tar.xz diff --git a/board/sipeed/licheepi_zero/patches/uboot/uboot.hash b/board/sipeed/licheepi_zero/patches/uboot/uboot.hash new file mode 100644 index 00000000000..440526977bd --- /dev/null +++ b/board/sipeed/licheepi_zero/patches/uboot/uboot.hash @@ -0,0 +1,2 @@ +# Locally calculated +sha256 0f933f6c5a426895bf306e93e6ac53c60870e4b54cda56d95211bec99e63bec7 u-boot-2025.07.tar.bz2 diff --git a/board/stmicroelectronics/common/stm32f4xx/stm32-post-build.sh b/board/stmicroelectronics/common/stm32f4xx/stm32-post-build.sh index 4fcce615007..2c5b6be098a 100755 --- a/board/stmicroelectronics/common/stm32f4xx/stm32-post-build.sh +++ b/board/stmicroelectronics/common/stm32f4xx/stm32-post-build.sh @@ -1,4 +1,5 @@ #!/bin/sh +set -eu # Busybox is built without network support sed -i '/hostname/d' ${TARGET_DIR}/etc/inittab diff --git a/board/stmicroelectronics/common/stm32mp1xx/patches/linux/linux.hash b/board/stmicroelectronics/common/stm32mp1xx/patches/linux/linux.hash index df103b81992..e3e6d391339 100644 --- a/board/stmicroelectronics/common/stm32mp1xx/patches/linux/linux.hash +++ b/board/stmicroelectronics/common/stm32mp1xx/patches/linux/linux.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 ab48800ab49985a78d2318ae8ac5f28fd3e123ea17357ef21498105a53337336 linux-6.12.22.tar.xz +sha256 164dc9d1f6c93c61a15e1f071c48379b467f2b17c469cce7223471968208ed03 linux-6.12.112.tar.xz diff --git a/board/stmicroelectronics/common/stm32mp1xx/patches/optee-client/optee-client.hash b/board/stmicroelectronics/common/stm32mp1xx/patches/optee-client/optee-client.hash index 5423bf93a58..379bbfea65e 100644 --- a/board/stmicroelectronics/common/stm32mp1xx/patches/optee-client/optee-client.hash +++ b/board/stmicroelectronics/common/stm32mp1xx/patches/optee-client/optee-client.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 a9a91bdb433df795c87a6d15198effbd648e3671ae611f2a3f8b41229d61cce0 optee-client-4.3.0.tar.gz +sha256 2ef152f25b682e59c3684d6d73d7c5a138495615f6b045e95266eb3d0bc0d04e optee-client-4.9.0.tar.gz diff --git a/board/stmicroelectronics/common/stm32mp1xx/patches/optee-os/optee-os.hash b/board/stmicroelectronics/common/stm32mp1xx/patches/optee-os/optee-os.hash index 2e12a5cdea7..3f5c58fcffa 100644 --- a/board/stmicroelectronics/common/stm32mp1xx/patches/optee-os/optee-os.hash +++ b/board/stmicroelectronics/common/stm32mp1xx/patches/optee-os/optee-os.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 390b271905c828d6def9fa6a77bbaa425f3b434d733c8eb18f582ccbc6896096 optee-os-4.3.0.tar.gz +sha256 9400e16c45bfa45f15585b2c933b86c449e7de05def0ecaaa62a4f38973a3a45 optee-os-4.9.0.tar.gz diff --git a/board/stmicroelectronics/common/stm32mp1xx/patches/uboot/uboot.hash b/board/stmicroelectronics/common/stm32mp1xx/patches/uboot/uboot.hash index 80ea21b7cb4..66c72d3afd5 100644 --- a/board/stmicroelectronics/common/stm32mp1xx/patches/uboot/uboot.hash +++ b/board/stmicroelectronics/common/stm32mp1xx/patches/uboot/uboot.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 439d3bef296effd54130be6a731c5b118be7fddd7fcc663ccbc5fb18294d8718 u-boot-2025.04.tar.bz2 +sha256 3f856da3cbbc93af51ff95fde18588a348b4a26723b01d9841e999d988481015 u-boot-2026.10.tar.bz2 diff --git a/board/stmicroelectronics/stm32f429-disco/patches/linux/linux.hash b/board/stmicroelectronics/stm32f429-disco/patches/linux/linux.hash index 7855de012d5..196a0535c90 100644 --- a/board/stmicroelectronics/stm32f429-disco/patches/linux/linux.hash +++ b/board/stmicroelectronics/stm32f429-disco/patches/linux/linux.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 97b59faf3f1925f296442a73a64439a447366f1d434be579803877097c5abe70 linux-6.1.133.tar.xz +sha256 3ec834a2fefc9a08aac62f993525d7acd10163db6f01d63b4549cbff3f5c9439 linux-6.1.189.tar.xz diff --git a/board/stmicroelectronics/stm32f469-disco/patches/linux/linux.hash b/board/stmicroelectronics/stm32f469-disco/patches/linux/linux.hash index 4e0aeb77d88..20f03bc1d4d 100644 --- a/board/stmicroelectronics/stm32f469-disco/patches/linux/linux.hash +++ b/board/stmicroelectronics/stm32f469-disco/patches/linux/linux.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 9319a47b1e9b5d344ff6015431856d0c9640e4faedc527c87f9129061a27136f linux-5.15.179.tar.xz +sha256 4d6ec07679bd008524391cb67597106018646c6378b3953c23ec69b9259cdf84 linux-5.15.222.tar.xz diff --git a/board/stmicroelectronics/stm32f469-disco/patches/uboot/uboot.hash b/board/stmicroelectronics/stm32f469-disco/patches/uboot/uboot.hash index 80ea21b7cb4..66c72d3afd5 100644 --- a/board/stmicroelectronics/stm32f469-disco/patches/uboot/uboot.hash +++ b/board/stmicroelectronics/stm32f469-disco/patches/uboot/uboot.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 439d3bef296effd54130be6a731c5b118be7fddd7fcc663ccbc5fb18294d8718 u-boot-2025.04.tar.bz2 +sha256 3f856da3cbbc93af51ff95fde18588a348b4a26723b01d9841e999d988481015 u-boot-2026.10.tar.bz2 diff --git a/board/stmicroelectronics/stm32f469-disco/post-build.sh b/board/stmicroelectronics/stm32f469-disco/post-build.sh index 03e9dcae821..74c59fdb72d 100755 --- a/board/stmicroelectronics/stm32f469-disco/post-build.sh +++ b/board/stmicroelectronics/stm32f469-disco/post-build.sh @@ -1,4 +1,6 @@ #!/bin/sh +set -eu + BOARD_DIR="$(dirname "$0")" install -m 0644 -D "${BOARD_DIR}"/extlinux.conf "${TARGET_DIR}"/boot/extlinux/extlinux.conf diff --git a/board/stmicroelectronics/stm32f469-disco/readme.txt b/board/stmicroelectronics/stm32f469-disco/readme.txt index 99d26ccb66f..6d46f7c31ae 100644 --- a/board/stmicroelectronics/stm32f469-disco/readme.txt +++ b/board/stmicroelectronics/stm32f469-disco/readme.txt @@ -20,7 +20,7 @@ It will flash the U-boot bootloader. Creating SD card ---------------- -Buildroot prepares an"sdcard.img" image in the output/images/ directory, +Buildroot prepares an "sdcard.img" image in the output/images/ directory, ready to be dumped on a SD card. Launch the following command as root: dd if=output/images/sdcard.img of=/dev/ diff --git a/board/stmicroelectronics/stm32f746-disco/patches/linux/linux.hash b/board/stmicroelectronics/stm32f746-disco/patches/linux/linux.hash index 4e0aeb77d88..20f03bc1d4d 100644 --- a/board/stmicroelectronics/stm32f746-disco/patches/linux/linux.hash +++ b/board/stmicroelectronics/stm32f746-disco/patches/linux/linux.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 9319a47b1e9b5d344ff6015431856d0c9640e4faedc527c87f9129061a27136f linux-5.15.179.tar.xz +sha256 4d6ec07679bd008524391cb67597106018646c6378b3953c23ec69b9259cdf84 linux-5.15.222.tar.xz diff --git a/board/stmicroelectronics/stm32f746-disco/patches/uboot/uboot.hash b/board/stmicroelectronics/stm32f746-disco/patches/uboot/uboot.hash index 80ea21b7cb4..66c72d3afd5 100644 --- a/board/stmicroelectronics/stm32f746-disco/patches/uboot/uboot.hash +++ b/board/stmicroelectronics/stm32f746-disco/patches/uboot/uboot.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 439d3bef296effd54130be6a731c5b118be7fddd7fcc663ccbc5fb18294d8718 u-boot-2025.04.tar.bz2 +sha256 3f856da3cbbc93af51ff95fde18588a348b4a26723b01d9841e999d988481015 u-boot-2026.10.tar.bz2 diff --git a/board/stmicroelectronics/stm32f746-disco/post-build.sh b/board/stmicroelectronics/stm32f746-disco/post-build.sh index 03e9dcae821..74c59fdb72d 100755 --- a/board/stmicroelectronics/stm32f746-disco/post-build.sh +++ b/board/stmicroelectronics/stm32f746-disco/post-build.sh @@ -1,4 +1,6 @@ #!/bin/sh +set -eu + BOARD_DIR="$(dirname "$0")" install -m 0644 -D "${BOARD_DIR}"/extlinux.conf "${TARGET_DIR}"/boot/extlinux/extlinux.conf diff --git a/board/stmicroelectronics/stm32f769-disco/patches/linux/linux.hash b/board/stmicroelectronics/stm32f769-disco/patches/linux/linux.hash index 4e0aeb77d88..20f03bc1d4d 100644 --- a/board/stmicroelectronics/stm32f769-disco/patches/linux/linux.hash +++ b/board/stmicroelectronics/stm32f769-disco/patches/linux/linux.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 9319a47b1e9b5d344ff6015431856d0c9640e4faedc527c87f9129061a27136f linux-5.15.179.tar.xz +sha256 4d6ec07679bd008524391cb67597106018646c6378b3953c23ec69b9259cdf84 linux-5.15.222.tar.xz diff --git a/board/stmicroelectronics/stm32f769-disco/patches/uboot/uboot.hash b/board/stmicroelectronics/stm32f769-disco/patches/uboot/uboot.hash index 80ea21b7cb4..66c72d3afd5 100644 --- a/board/stmicroelectronics/stm32f769-disco/patches/uboot/uboot.hash +++ b/board/stmicroelectronics/stm32f769-disco/patches/uboot/uboot.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 439d3bef296effd54130be6a731c5b118be7fddd7fcc663ccbc5fb18294d8718 u-boot-2025.04.tar.bz2 +sha256 3f856da3cbbc93af51ff95fde18588a348b4a26723b01d9841e999d988481015 u-boot-2026.10.tar.bz2 diff --git a/board/stmicroelectronics/stm32f769-disco/post-build.sh b/board/stmicroelectronics/stm32f769-disco/post-build.sh index 45100509411..293bf30cb3f 100755 --- a/board/stmicroelectronics/stm32f769-disco/post-build.sh +++ b/board/stmicroelectronics/stm32f769-disco/post-build.sh @@ -1,4 +1,6 @@ #!/bin/sh +set -eu + BOARD_DIR="$(dirname "$0")" # Kernel is built without devpts support diff --git a/board/stmicroelectronics/stm32f769-disco/readme.txt b/board/stmicroelectronics/stm32f769-disco/readme.txt index 8f4f79a8613..5b8fba7099e 100644 --- a/board/stmicroelectronics/stm32f769-disco/readme.txt +++ b/board/stmicroelectronics/stm32f769-disco/readme.txt @@ -20,7 +20,7 @@ It will flash the U-boot bootloader. Creating SD card ---------------- -Buildroot prepares an"sdcard.img" image in the output/images/ directory, +Buildroot prepares an "sdcard.img" image in the output/images/ directory, ready to be dumped on a SD card. Launch the following command as root: dd if=output/images/sdcard.img of=/dev/ diff --git a/board/stmicroelectronics/stm32h747-disco/extlinux.conf b/board/stmicroelectronics/stm32h747-disco/extlinux.conf new file mode 100644 index 00000000000..36f60e346b6 --- /dev/null +++ b/board/stmicroelectronics/stm32h747-disco/extlinux.conf @@ -0,0 +1,4 @@ +label stm32h747i-disco-buildroot + kernel /boot/zImage + devicetree /boot/stm32h747i-disco.dtb + append console=ttySTM0,115200 root=/dev/mmcblk0p1 rw rootfstype=ext2 rootwait earlyprintk consoleblank=0 ignore_loglevel diff --git a/board/stmicroelectronics/stm32h747-disco/flash_sd.sh b/board/stmicroelectronics/stm32h747-disco/flash_sd.sh new file mode 100755 index 00000000000..6f2e421aba3 --- /dev/null +++ b/board/stmicroelectronics/stm32h747-disco/flash_sd.sh @@ -0,0 +1,18 @@ +#!/bin/sh + +OUTPUT_DIR=$1 + +if ! test -d "${OUTPUT_DIR}" ; then + echo "ERROR: no output directory specified." + echo "Usage: $0 OUTPUT_DIR" + exit 1 +fi + +"${OUTPUT_DIR}"/host/bin/openocd -f board/stm32h747i-disco.cfg \ + -c "init" \ + -c "reset init" \ + -c "flash probe 0" \ + -c "flash info 0" \ + -c "flash write_image erase ${OUTPUT_DIR}/images/u-boot.bin 0x08000000" \ + -c "reset run" \ + -c "shutdown" diff --git a/board/stmicroelectronics/stm32h747-disco/genimage.cfg b/board/stmicroelectronics/stm32h747-disco/genimage.cfg new file mode 100644 index 00000000000..e911a94e46b --- /dev/null +++ b/board/stmicroelectronics/stm32h747-disco/genimage.cfg @@ -0,0 +1,10 @@ +image sdcard.img { + hdimage { + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext2" + size = 32M + } +} diff --git a/board/stmicroelectronics/stm32h747-disco/linux-sd.fragment b/board/stmicroelectronics/stm32h747-disco/linux-sd.fragment new file mode 100644 index 00000000000..846229d0d46 --- /dev/null +++ b/board/stmicroelectronics/stm32h747-disco/linux-sd.fragment @@ -0,0 +1 @@ +# CONFIG_XIP_KERNEL is not set diff --git a/board/stmicroelectronics/stm32h747-disco/patches/linux/linux.hash b/board/stmicroelectronics/stm32h747-disco/patches/linux/linux.hash new file mode 100644 index 00000000000..d89fbda1a71 --- /dev/null +++ b/board/stmicroelectronics/stm32h747-disco/patches/linux/linux.hash @@ -0,0 +1,2 @@ +# Locally calculated +sha256 4633bbda2ab95eaf2a7af4041236451d6759c72e6946265531af4b3aacefbf89 linux-6.18.56.tar.xz diff --git a/board/stmicroelectronics/stm32h747-disco/patches/uboot/uboot.hash b/board/stmicroelectronics/stm32h747-disco/patches/uboot/uboot.hash new file mode 100644 index 00000000000..66c72d3afd5 --- /dev/null +++ b/board/stmicroelectronics/stm32h747-disco/patches/uboot/uboot.hash @@ -0,0 +1,2 @@ +# Locally calculated +sha256 3f856da3cbbc93af51ff95fde18588a348b4a26723b01d9841e999d988481015 u-boot-2026.10.tar.bz2 diff --git a/board/stmicroelectronics/stm32h747-disco/post-build.sh b/board/stmicroelectronics/stm32h747-disco/post-build.sh new file mode 100755 index 00000000000..293bf30cb3f --- /dev/null +++ b/board/stmicroelectronics/stm32h747-disco/post-build.sh @@ -0,0 +1,9 @@ +#!/bin/sh +set -eu + +BOARD_DIR="$(dirname "$0")" + +# Kernel is built without devpts support +sed -i '/^devpts/d' "${TARGET_DIR}"/etc/fstab + +install -m 0644 -D "${BOARD_DIR}"/extlinux.conf "${TARGET_DIR}"/boot/extlinux/extlinux.conf diff --git a/board/stmicroelectronics/stm32h747-disco/readme.txt b/board/stmicroelectronics/stm32h747-disco/readme.txt new file mode 100644 index 00000000000..5c565de2112 --- /dev/null +++ b/board/stmicroelectronics/stm32h747-disco/readme.txt @@ -0,0 +1,32 @@ +STM32H747 Discovery +=================== + +This tutorial describes how to use the predefined Buildroot +configuration for the STM32H747 Discovery evaluation platform. + +Building +-------- + + make stm32h747_disco_sd_defconfig + make + +Flashing +-------- + + ./board/stmicroelectronics/stm32h747-disco/flash_sd.sh output/ + +It will flash the U-Boot bootloader. + +Creating SD card +---------------- + +Buildroot prepares an "sdcard.img" image in the output/images/ directory, +ready to be dumped on a SD card. Launch the following command as root: + + dd if=output/images/sdcard.img of=/dev/ + +*** WARNING! This will destroy all the card content. Use with care! *** + +For details about the medium image layout and its content, see the +definition in board/stmicroelectronics/stm32h747-disco/genimage.cfg. + diff --git a/board/technologic/ts4900/genimage.cfg b/board/technologic/ts4900/genimage.cfg deleted file mode 100644 index 7e580eb27b5..00000000000 --- a/board/technologic/ts4900/genimage.cfg +++ /dev/null @@ -1,10 +0,0 @@ -image sdcard.img { - hdimage { - } - - partition rootfs { - partition-type = 0x83 - image = "rootfs.ext2" - size = 256M - } -} diff --git a/board/technologic/ts4900/post-image.sh b/board/technologic/ts4900/post-image.sh deleted file mode 100755 index cb966d883bf..00000000000 --- a/board/technologic/ts4900/post-image.sh +++ /dev/null @@ -1,17 +0,0 @@ -#!/bin/bash -# -# Copyright (C) 2015-2016 Savoir-Faire Linux -# Post image generation script. - -BOARD_DIR="$(dirname $0)" -GENIMAGE_CFG=$BOARD_DIR/genimage.cfg -GENIMAGE_TMP=$BUILD_DIR/.genimage_tmp - -rm -rf $GENIMAGE_TMP - -${HOST_DIR}/bin/genimage \ - --config ${GENIMAGE_CFG} \ - --rootpath $TARGET_DIR \ - --tmppath $GENIMAGE_TMP \ - --inputpath $BINARIES_DIR \ - --outputpath $BINARIES_DIR diff --git a/board/technologic/ts4900/readme.txt b/board/technologic/ts4900/readme.txt deleted file mode 100644 index 121e6397495..00000000000 --- a/board/technologic/ts4900/readme.txt +++ /dev/null @@ -1,52 +0,0 @@ -Technologic Systems TS-4900 -=========================== - -This document explains how to set up a basic Buildroot system for the -Technologic Systems TS-4900 System on Module. - -The TS-4900 is a TS-SOCKET macrocontroller board based on the -Freescale i.MX6 Single or Quad Core ARM Cortex-A9 CPU clocked at -1GHz. The TS-4900 features Gigabit Ethernet, SATA II Port, PCI Express -Bus, high speed USB host and device (OTG), and microSD card. -More details on the board here: - https://docs.embeddedTS.com/TS-4900 - -The TS-4900 is not currently supported by mainline Linux, so a -Technologic Systems Linux is used based on Linux 4.1. -The default U-boot configuration flashed scans the SD card to find the -0x83 partition type, corresponding to the rootfs. Then it will load -both uImage and dts from the /boot directory. -To build the default configuration you only have to: - - $ make ts4900_defconfig - $ make - -The output looks like: -output/images/ -├── imx6q-ts4900.dtb -├── rootfs.ext2 -├── rootfs.tar -├── sdcard.img -└── uImage - -Since both the uImage and the dts are contained in the /boot -directory, the provided post-image script generates an image file -containing only one partition for the rootfs: - - $ fdisk output/images/sdcard.img - Device Boot Start End Blocks Id System -output/images/sdcard.img1 1 524288 262144 83 Linux - -This image can be directly written to an SD card. - - $ sudo dd if=output/images/sdcard.img of=/dev/mmcblk0 - -In order to test the image on TS-4900 board, a TS baseboard, such as -the TS-9xxx series, is needed to provide power, console header, RJ45 -connector etc. - -The bootloader comes pre-flashed on the board on an SPI flash. Since -updating the bootloader is risky and not trivial, it is not included -in the Buildroot defconfig. Refer to -https://docs.embeddedTS.com/TS-4900#U-Boot for details on which -U-Boot config to use and how to flash it. diff --git a/board/technologic/ts5500/fs-overlay/boot/syslinux/syslinux.cfg b/board/technologic/ts5500/fs-overlay/boot/syslinux/syslinux.cfg deleted file mode 100644 index 64f8187733a..00000000000 --- a/board/technologic/ts5500/fs-overlay/boot/syslinux/syslinux.cfg +++ /dev/null @@ -1,9 +0,0 @@ -SERIAL 1 115200 -CONSOLE 0 - -DEFAULT linux - -LABEL linux - SAY Now booting the kernel from SYSLINUX... - LINUX /boot/bzImage - APPEND console=ttyS1,115200n8 root=/dev/sda1 rootfstype=ext4 rw diff --git a/board/technologic/ts5500/linux-4.14.config b/board/technologic/ts5500/linux-4.14.config deleted file mode 100644 index eb81596e258..00000000000 --- a/board/technologic/ts5500/linux-4.14.config +++ /dev/null @@ -1,111 +0,0 @@ -# CONFIG_CROSS_MEMORY_ATTACH is not set -CONFIG_PARTITION_ADVANCED=y -# CONFIG_X86_EXTENDED_PLATFORM is not set -CONFIG_MELAN=y -CONFIG_X86_GENERIC=y -CONFIG_X86_REBOOTFIXUPS=y -CONFIG_NOHIGHMEM=y -# CONFIG_COMPACTION is not set -# CONFIG_BOUNCE is not set -# CONFIG_RELOCATABLE is not set -# CONFIG_SUSPEND is not set -# CONFIG_ACPI is not set -CONFIG_CPU_IDLE=y -CONFIG_TS5500=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -# CONFIG_WIRELESS is not set -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -# CONFIG_BLK_DEV is not set -CONFIG_BLK_DEV_SD=y -# CONFIG_SCSI_LOWLEVEL is not set -CONFIG_ATA=y -# CONFIG_ATA_VERBOSE_ERROR is not set -# CONFIG_SATA_PMP is not set -CONFIG_ATA_GENERIC=y -CONFIG_PATA_LEGACY=y -CONFIG_NETDEVICES=y -# CONFIG_NET_CORE is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_NET_VENDOR_ADAPTEC is not set -# CONFIG_NET_VENDOR_ALTEON is not set -# CONFIG_NET_VENDOR_AMD is not set -# CONFIG_NET_VENDOR_ARC is not set -# CONFIG_NET_VENDOR_ATHEROS is not set -# CONFIG_NET_VENDOR_BROADCOM is not set -# CONFIG_NET_VENDOR_BROCADE is not set -# CONFIG_NET_VENDOR_CHELSIO is not set -# CONFIG_NET_VENDOR_CISCO is not set -CONFIG_NET_TULIP=y -CONFIG_DM9102=y -# CONFIG_NET_VENDOR_DLINK is not set -# CONFIG_NET_VENDOR_EMULEX is not set -# CONFIG_NET_VENDOR_EXAR is not set -# CONFIG_NET_VENDOR_HP is not set -# CONFIG_NET_VENDOR_INTEL is not set -# CONFIG_NET_VENDOR_MARVELL is not set -# CONFIG_NET_VENDOR_MELLANOX is not set -# CONFIG_NET_VENDOR_MICREL is not set -# CONFIG_NET_VENDOR_MYRI is not set -# CONFIG_NET_VENDOR_NATSEMI is not set -# CONFIG_NET_VENDOR_NVIDIA is not set -# CONFIG_NET_VENDOR_OKI is not set -# CONFIG_NET_PACKET_ENGINE is not set -# CONFIG_NET_VENDOR_QLOGIC is not set -# CONFIG_NET_VENDOR_REALTEK is not set -# CONFIG_NET_VENDOR_RDC is not set -# CONFIG_NET_VENDOR_SEEQ is not set -# CONFIG_NET_VENDOR_SILAN is not set -# CONFIG_NET_VENDOR_SIS is not set -# CONFIG_NET_VENDOR_SMSC is not set -# CONFIG_NET_VENDOR_STMICRO is not set -# CONFIG_NET_VENDOR_SUN is not set -# CONFIG_NET_VENDOR_TEHUTI is not set -# CONFIG_NET_VENDOR_TI is not set -# CONFIG_NET_VENDOR_VIA is not set -# CONFIG_NET_VENDOR_WIZNET is not set -CONFIG_PHYLIB=y -CONFIG_DAVICOM_PHY=y -# CONFIG_WLAN is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_8250=y -# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_GPIOLIB=y -CONFIG_GPIO_TS5500=y -CONFIG_SENSORS_MAX197=y -CONFIG_WATCHDOG=y -CONFIG_SC520_WDT=y -CONFIG_USB=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_SERIAL=y -CONFIG_USB_SERIAL_FTDI_SIO=y -CONFIG_USB_SERIAL_PL2303=y -# CONFIG_X86_PLATFORM_DEVICES is not set -# CONFIG_IOMMU_SUPPORT is not set -# CONFIG_DMIID is not set -CONFIG_EXT4_FS=y -# CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY_USER is not set -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -# CONFIG_MISC_FILESYSTEMS is not set -# CONFIG_NETWORK_FILESYSTEMS is not set -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_15=y -CONFIG_NLS_UTF8=y -# CONFIG_VIRTUALIZATION is not set -CONFIG_XZ_DEC=y diff --git a/board/technologic/ts5500/readme.txt b/board/technologic/ts5500/readme.txt deleted file mode 100644 index 1fe384faae9..00000000000 --- a/board/technologic/ts5500/readme.txt +++ /dev/null @@ -1,52 +0,0 @@ -Technologic Systems TS-5x00 SBCs -================================ - -This document explains how to set up a basic Buildroot system for the -Technologic Systems TS-5x00 serie of x86-based Single Board Computers. - -TS-5x00 Single Board Computers are based on the AMD Elan520 processor. For more -information please have a look at https://docs.embeddedTS.com/Documentation_Home#AMD - -The kernel configuration works for any AMD Elan520-based SBCs, but the support -is enhanced for the TS-5500 and TS-5400 models (on-board devices registration -and additional sysfs attributes under /sys/devices/platform/). - -To build the default configuration you only have to: - - $ make ts5500_defconfig - $ make - -You will need a Compact Flash card of sufficient size and the first or only -partition configured as Linux type, with the bootable flag. - -You can transfer the system on the partition then optionally resize it with: - - # dd if=output/images/rootfs.ext4 of=/dev/sdX1 - # resize2fs /dev/sdX1 - -Or you can just extract the root filesystem to the partition with: - - # mount /dev/sdX1 /mnt - # tar -pxf output/images/rootfs.tar -C /mnt - # umount /mnt - -To install the bootloader, you will need to copy the MBR: - - # cat output/images/syslinux/mbr.bin > /dev/sdX - -Then install SYSLINUX in the mounted partition: - - # mount /dev/sdX1 /mnt - # output/host/sbin/extlinux --install /mnt/boot/syslinux - # umount /mnt - -IMPORTANT: In order for the board to boot the Compact Flash with a recent -config, the BIOS must use Logical Block Addressing (LBA). You can do it by -choosing "Ide 0: AUTOCONFIG, LBA" under "IDE DRIVE GEOMETRY" in the "Basic CMOS -Configuration" screen. Also, don't forget to set the 'active' (or 'bootable') -flag on partition 1. For details about the CMOS setup, please see: -https://docs.embeddedts.com/TS-5500#System_BIOS_Setup_Screens - -Connect a terminal program to the rs232 connector marked "COM2" -with baudrate set to 115200, insert the Compact Flash card into the socket, -power up the board, and enjoy. diff --git a/board/ti/am574x-idk/extlinux.conf b/board/ti/am574x-idk/extlinux.conf index 29e0ecfa142..4faa8f7eed3 100644 --- a/board/ti/am574x-idk/extlinux.conf +++ b/board/ti/am574x-idk/extlinux.conf @@ -1,4 +1,4 @@ label am5749-idk-buildroot kernel /zImage fdtdir / - append console=ttyS0,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait + append console=ttyS2,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait diff --git a/board/ti/am574x-idk/genimage.cfg b/board/ti/am574x-idk/genimage.cfg index 02a9ffe0131..e7ab22f29b5 100644 --- a/board/ti/am574x-idk/genimage.cfg +++ b/board/ti/am574x-idk/genimage.cfg @@ -4,9 +4,11 @@ image boot.vfat { "MLO", "u-boot.img", "zImage", - "am574x-idk.dtb", + "ti", "extlinux" } + + label = "boot" } size = 16M @@ -25,6 +27,5 @@ image sdcard.img { partition rootfs { partition-type = 0x83 image = "rootfs.ext4" - size = 1G } } diff --git a/board/ti/am574x-idk/patches/linux/linux.hash b/board/ti/am574x-idk/patches/linux/linux.hash new file mode 100644 index 00000000000..020dc72386c --- /dev/null +++ b/board/ti/am574x-idk/patches/linux/linux.hash @@ -0,0 +1,2 @@ +# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc +sha256 f4855f382c1b735c84072bdef36db5bcd5dc7b0c37e42f5104317149a0a486ef linux-6.18.18.tar.xz diff --git a/board/ti/am574x-idk/patches/uboot/uboot.hash b/board/ti/am574x-idk/patches/uboot/uboot.hash new file mode 100644 index 00000000000..36322a6a904 --- /dev/null +++ b/board/ti/am574x-idk/patches/uboot/uboot.hash @@ -0,0 +1,2 @@ +# Locally calculated +sha256 ac7c04b8b7004923b00a4e5d6699c5df4d21233bac9fda690d8cfbc209fff2fd u-boot-2026.04.tar.bz2 diff --git a/board/ti/am62ax-sk/patches/arm-trusted-firmware/arm-trusted-firmware.hash b/board/ti/am62ax-sk/patches/arm-trusted-firmware/arm-trusted-firmware.hash index 8b77e1f1653..2e24bcd0de5 100644 --- a/board/ti/am62ax-sk/patches/arm-trusted-firmware/arm-trusted-firmware.hash +++ b/board/ti/am62ax-sk/patches/arm-trusted-firmware/arm-trusted-firmware.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 c0f23ccc71c49989e9ad238acf334473c17b7c88f79a20c829c3d443e3794a22 arm-trusted-firmware-v2.11-git4.tar.gz +sha256 b807d8bf190b7c46b4260729b4bbe2f7df83cd1086edcb181d66595ae6598d23 arm-trusted-firmware-v2.15.0-git4.tar.gz diff --git a/board/ti/am62ax-sk/patches/linux/linux.hash b/board/ti/am62ax-sk/patches/linux/linux.hash index 53eb1438945..49bf75b9242 100644 --- a/board/ti/am62ax-sk/patches/linux/linux.hash +++ b/board/ti/am62ax-sk/patches/linux/linux.hash @@ -1,2 +1,2 @@ -# Locally calculated -sha256 774698422ee54c5f1e704456f37c65c06b51b4e9a8b0866f34580d86fef8e226 linux-6.10.tar.xz +# From https://www.kernel.org/pub/linux/kernel/v7.x/sha256sums.asc +sha256 2feaa70453e91f541be6a5c9078d8168e081af45a3d9718054850538cff2ebf3 linux-7.2.10.tar.xz diff --git a/board/ti/am62ax-sk/patches/ti-k3-r5-loader/0001-pylibfdt-Replace-removed-SWIG-Python-2-compatibility.patch b/board/ti/am62ax-sk/patches/ti-k3-r5-loader/0001-pylibfdt-Replace-removed-SWIG-Python-2-compatibility.patch new file mode 100644 index 00000000000..10968ce8760 --- /dev/null +++ b/board/ti/am62ax-sk/patches/ti-k3-r5-loader/0001-pylibfdt-Replace-removed-SWIG-Python-2-compatibility.patch @@ -0,0 +1,67 @@ +From 527115ef6783cec49e5610c523c124b399011361 Mon Sep 17 00:00:00 2001 +From: Jaipaul Cheernam +Date: Tue, 11 Aug 2026 15:34:33 +0200 +Subject: [PATCH] pylibfdt: Replace removed SWIG Python 2 compatibility macros +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +SWIG 4.5.0 removed Python 2 compatibility macros (PyInt_*, PyString_*) +from its runtime header pyhead.swg (see commit 79f7a2b7cb7d). Replace +them with their Python 3 C API equivalents: + +- PyString_FromString -> PyUnicode_FromString +- PyString_AsString -> PyBytes_AsString +- PyInt_AsLong -> PyLong_AsLong + +The replacements are safe since the macros were already aliased to +these exact functions in SWIG's Python 3 code path. + +This is a backport of dtc commit 5008d1d6a356 ("pylibfdt: Replace +removed SWIG Python 2 compatibility macros"). + +Signed-off-by: Jaipaul Cheernam +Reviewed-by: Jérémie Dautheribes +Tested-by: Jérémie Dautheribes +Signed-off-by: Peter Robinson +Reviewed-by: Peter Robinson +Upstream: https://git.u-boot-project.org/u-boot/u-boot/-/commit/527115ef6783cec49e5610c523c124b399011361 +Signed-off-by: Julien Olivain +--- + scripts/dtc/pylibfdt/libfdt.i_shipped | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +diff --git a/scripts/dtc/pylibfdt/libfdt.i_shipped b/scripts/dtc/pylibfdt/libfdt.i_shipped +index e4659489a96ab..326a15c7941e3 100644 +--- a/scripts/dtc/pylibfdt/libfdt.i_shipped ++++ b/scripts/dtc/pylibfdt/libfdt.i_shipped +@@ -1033,7 +1033,7 @@ typedef uint32_t fdt32_t; + PyObject *buff; + + if ($1) { +- resultobj = PyString_FromString( ++ resultobj = PyUnicode_FromString( + fdt_string(fdt1, fdt32_to_cpu($1->nameoff))); + buff = PyByteArray_FromStringAndSize( + (const char *)($1 + 1), fdt32_to_cpu($1->len)); +@@ -1064,13 +1064,13 @@ typedef uint32_t fdt32_t; + } + $1 = PyBytes_AsString($input); + %#else +- $1 = PyString_AsString($input); /* char *str */ ++ $1 = PyBytes_AsString($input); /* char *str */ + %#endif + } + + /* typemaps used for fdt_next_node() */ + %typemap(in, numinputs=1) int *depth (int depth) { +- depth = (int) PyInt_AsLong($input); ++ depth = (int) PyLong_AsLong($input); + $1 = &depth; + } + + +base-commit: 1262e50a34a0e01f974e8d909c5b255f8fa7199e +-- +2.55.0 + diff --git a/board/ti/am62ax-sk/patches/uboot/0001-pylibfdt-Replace-removed-SWIG-Python-2-compatibility.patch b/board/ti/am62ax-sk/patches/uboot/0001-pylibfdt-Replace-removed-SWIG-Python-2-compatibility.patch new file mode 100644 index 00000000000..10968ce8760 --- /dev/null +++ b/board/ti/am62ax-sk/patches/uboot/0001-pylibfdt-Replace-removed-SWIG-Python-2-compatibility.patch @@ -0,0 +1,67 @@ +From 527115ef6783cec49e5610c523c124b399011361 Mon Sep 17 00:00:00 2001 +From: Jaipaul Cheernam +Date: Tue, 11 Aug 2026 15:34:33 +0200 +Subject: [PATCH] pylibfdt: Replace removed SWIG Python 2 compatibility macros +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +SWIG 4.5.0 removed Python 2 compatibility macros (PyInt_*, PyString_*) +from its runtime header pyhead.swg (see commit 79f7a2b7cb7d). Replace +them with their Python 3 C API equivalents: + +- PyString_FromString -> PyUnicode_FromString +- PyString_AsString -> PyBytes_AsString +- PyInt_AsLong -> PyLong_AsLong + +The replacements are safe since the macros were already aliased to +these exact functions in SWIG's Python 3 code path. + +This is a backport of dtc commit 5008d1d6a356 ("pylibfdt: Replace +removed SWIG Python 2 compatibility macros"). + +Signed-off-by: Jaipaul Cheernam +Reviewed-by: Jérémie Dautheribes +Tested-by: Jérémie Dautheribes +Signed-off-by: Peter Robinson +Reviewed-by: Peter Robinson +Upstream: https://git.u-boot-project.org/u-boot/u-boot/-/commit/527115ef6783cec49e5610c523c124b399011361 +Signed-off-by: Julien Olivain +--- + scripts/dtc/pylibfdt/libfdt.i_shipped | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +diff --git a/scripts/dtc/pylibfdt/libfdt.i_shipped b/scripts/dtc/pylibfdt/libfdt.i_shipped +index e4659489a96ab..326a15c7941e3 100644 +--- a/scripts/dtc/pylibfdt/libfdt.i_shipped ++++ b/scripts/dtc/pylibfdt/libfdt.i_shipped +@@ -1033,7 +1033,7 @@ typedef uint32_t fdt32_t; + PyObject *buff; + + if ($1) { +- resultobj = PyString_FromString( ++ resultobj = PyUnicode_FromString( + fdt_string(fdt1, fdt32_to_cpu($1->nameoff))); + buff = PyByteArray_FromStringAndSize( + (const char *)($1 + 1), fdt32_to_cpu($1->len)); +@@ -1064,13 +1064,13 @@ typedef uint32_t fdt32_t; + } + $1 = PyBytes_AsString($input); + %#else +- $1 = PyString_AsString($input); /* char *str */ ++ $1 = PyBytes_AsString($input); /* char *str */ + %#endif + } + + /* typemaps used for fdt_next_node() */ + %typemap(in, numinputs=1) int *depth (int depth) { +- depth = (int) PyInt_AsLong($input); ++ depth = (int) PyLong_AsLong($input); + $1 = &depth; + } + + +base-commit: 1262e50a34a0e01f974e8d909c5b255f8fa7199e +-- +2.55.0 + diff --git a/board/ti/am62ax-sk/patches/uboot/uboot.hash b/board/ti/am62ax-sk/patches/uboot/uboot.hash index fe9b4f53dc6..ff6e4ed2e2f 100644 --- a/board/ti/am62ax-sk/patches/uboot/uboot.hash +++ b/board/ti/am62ax-sk/patches/uboot/uboot.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 f591da9ab90ef3d6b3d173766d0ddff90c4ed7330680897486117df390d83c8f u-boot-2024.07.tar.bz2 +sha256 78e8bfc382fe388f9b55aa1daf8c563522a037779b5d4c349d1415e381f1243e u-boot-2026.07.tar.bz2 diff --git a/board/ti/am62px-sk/patches/arm-trusted-firmware/arm-trusted-firmware.hash b/board/ti/am62px-sk/patches/arm-trusted-firmware/arm-trusted-firmware.hash index 8b77e1f1653..2e24bcd0de5 100644 --- a/board/ti/am62px-sk/patches/arm-trusted-firmware/arm-trusted-firmware.hash +++ b/board/ti/am62px-sk/patches/arm-trusted-firmware/arm-trusted-firmware.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 c0f23ccc71c49989e9ad238acf334473c17b7c88f79a20c829c3d443e3794a22 arm-trusted-firmware-v2.11-git4.tar.gz +sha256 b807d8bf190b7c46b4260729b4bbe2f7df83cd1086edcb181d66595ae6598d23 arm-trusted-firmware-v2.15.0-git4.tar.gz diff --git a/board/ti/am62px-sk/patches/linux/linux.hash b/board/ti/am62px-sk/patches/linux/linux.hash index 53eb1438945..49bf75b9242 100644 --- a/board/ti/am62px-sk/patches/linux/linux.hash +++ b/board/ti/am62px-sk/patches/linux/linux.hash @@ -1,2 +1,2 @@ -# Locally calculated -sha256 774698422ee54c5f1e704456f37c65c06b51b4e9a8b0866f34580d86fef8e226 linux-6.10.tar.xz +# From https://www.kernel.org/pub/linux/kernel/v7.x/sha256sums.asc +sha256 2feaa70453e91f541be6a5c9078d8168e081af45a3d9718054850538cff2ebf3 linux-7.2.10.tar.xz diff --git a/board/ti/am62px-sk/patches/ti-k3-r5-loader/0001-pylibfdt-Replace-removed-SWIG-Python-2-compatibility.patch b/board/ti/am62px-sk/patches/ti-k3-r5-loader/0001-pylibfdt-Replace-removed-SWIG-Python-2-compatibility.patch new file mode 100644 index 00000000000..10968ce8760 --- /dev/null +++ b/board/ti/am62px-sk/patches/ti-k3-r5-loader/0001-pylibfdt-Replace-removed-SWIG-Python-2-compatibility.patch @@ -0,0 +1,67 @@ +From 527115ef6783cec49e5610c523c124b399011361 Mon Sep 17 00:00:00 2001 +From: Jaipaul Cheernam +Date: Tue, 11 Aug 2026 15:34:33 +0200 +Subject: [PATCH] pylibfdt: Replace removed SWIG Python 2 compatibility macros +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +SWIG 4.5.0 removed Python 2 compatibility macros (PyInt_*, PyString_*) +from its runtime header pyhead.swg (see commit 79f7a2b7cb7d). Replace +them with their Python 3 C API equivalents: + +- PyString_FromString -> PyUnicode_FromString +- PyString_AsString -> PyBytes_AsString +- PyInt_AsLong -> PyLong_AsLong + +The replacements are safe since the macros were already aliased to +these exact functions in SWIG's Python 3 code path. + +This is a backport of dtc commit 5008d1d6a356 ("pylibfdt: Replace +removed SWIG Python 2 compatibility macros"). + +Signed-off-by: Jaipaul Cheernam +Reviewed-by: Jérémie Dautheribes +Tested-by: Jérémie Dautheribes +Signed-off-by: Peter Robinson +Reviewed-by: Peter Robinson +Upstream: https://git.u-boot-project.org/u-boot/u-boot/-/commit/527115ef6783cec49e5610c523c124b399011361 +Signed-off-by: Julien Olivain +--- + scripts/dtc/pylibfdt/libfdt.i_shipped | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +diff --git a/scripts/dtc/pylibfdt/libfdt.i_shipped b/scripts/dtc/pylibfdt/libfdt.i_shipped +index e4659489a96ab..326a15c7941e3 100644 +--- a/scripts/dtc/pylibfdt/libfdt.i_shipped ++++ b/scripts/dtc/pylibfdt/libfdt.i_shipped +@@ -1033,7 +1033,7 @@ typedef uint32_t fdt32_t; + PyObject *buff; + + if ($1) { +- resultobj = PyString_FromString( ++ resultobj = PyUnicode_FromString( + fdt_string(fdt1, fdt32_to_cpu($1->nameoff))); + buff = PyByteArray_FromStringAndSize( + (const char *)($1 + 1), fdt32_to_cpu($1->len)); +@@ -1064,13 +1064,13 @@ typedef uint32_t fdt32_t; + } + $1 = PyBytes_AsString($input); + %#else +- $1 = PyString_AsString($input); /* char *str */ ++ $1 = PyBytes_AsString($input); /* char *str */ + %#endif + } + + /* typemaps used for fdt_next_node() */ + %typemap(in, numinputs=1) int *depth (int depth) { +- depth = (int) PyInt_AsLong($input); ++ depth = (int) PyLong_AsLong($input); + $1 = &depth; + } + + +base-commit: 1262e50a34a0e01f974e8d909c5b255f8fa7199e +-- +2.55.0 + diff --git a/board/ti/am62px-sk/patches/uboot/0001-pylibfdt-Replace-removed-SWIG-Python-2-compatibility.patch b/board/ti/am62px-sk/patches/uboot/0001-pylibfdt-Replace-removed-SWIG-Python-2-compatibility.patch new file mode 100644 index 00000000000..10968ce8760 --- /dev/null +++ b/board/ti/am62px-sk/patches/uboot/0001-pylibfdt-Replace-removed-SWIG-Python-2-compatibility.patch @@ -0,0 +1,67 @@ +From 527115ef6783cec49e5610c523c124b399011361 Mon Sep 17 00:00:00 2001 +From: Jaipaul Cheernam +Date: Tue, 11 Aug 2026 15:34:33 +0200 +Subject: [PATCH] pylibfdt: Replace removed SWIG Python 2 compatibility macros +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +SWIG 4.5.0 removed Python 2 compatibility macros (PyInt_*, PyString_*) +from its runtime header pyhead.swg (see commit 79f7a2b7cb7d). Replace +them with their Python 3 C API equivalents: + +- PyString_FromString -> PyUnicode_FromString +- PyString_AsString -> PyBytes_AsString +- PyInt_AsLong -> PyLong_AsLong + +The replacements are safe since the macros were already aliased to +these exact functions in SWIG's Python 3 code path. + +This is a backport of dtc commit 5008d1d6a356 ("pylibfdt: Replace +removed SWIG Python 2 compatibility macros"). + +Signed-off-by: Jaipaul Cheernam +Reviewed-by: Jérémie Dautheribes +Tested-by: Jérémie Dautheribes +Signed-off-by: Peter Robinson +Reviewed-by: Peter Robinson +Upstream: https://git.u-boot-project.org/u-boot/u-boot/-/commit/527115ef6783cec49e5610c523c124b399011361 +Signed-off-by: Julien Olivain +--- + scripts/dtc/pylibfdt/libfdt.i_shipped | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +diff --git a/scripts/dtc/pylibfdt/libfdt.i_shipped b/scripts/dtc/pylibfdt/libfdt.i_shipped +index e4659489a96ab..326a15c7941e3 100644 +--- a/scripts/dtc/pylibfdt/libfdt.i_shipped ++++ b/scripts/dtc/pylibfdt/libfdt.i_shipped +@@ -1033,7 +1033,7 @@ typedef uint32_t fdt32_t; + PyObject *buff; + + if ($1) { +- resultobj = PyString_FromString( ++ resultobj = PyUnicode_FromString( + fdt_string(fdt1, fdt32_to_cpu($1->nameoff))); + buff = PyByteArray_FromStringAndSize( + (const char *)($1 + 1), fdt32_to_cpu($1->len)); +@@ -1064,13 +1064,13 @@ typedef uint32_t fdt32_t; + } + $1 = PyBytes_AsString($input); + %#else +- $1 = PyString_AsString($input); /* char *str */ ++ $1 = PyBytes_AsString($input); /* char *str */ + %#endif + } + + /* typemaps used for fdt_next_node() */ + %typemap(in, numinputs=1) int *depth (int depth) { +- depth = (int) PyInt_AsLong($input); ++ depth = (int) PyLong_AsLong($input); + $1 = &depth; + } + + +base-commit: 1262e50a34a0e01f974e8d909c5b255f8fa7199e +-- +2.55.0 + diff --git a/board/ti/am62px-sk/patches/uboot/uboot.hash b/board/ti/am62px-sk/patches/uboot/uboot.hash index fe9b4f53dc6..ff6e4ed2e2f 100644 --- a/board/ti/am62px-sk/patches/uboot/uboot.hash +++ b/board/ti/am62px-sk/patches/uboot/uboot.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 f591da9ab90ef3d6b3d173766d0ddff90c4ed7330680897486117df390d83c8f u-boot-2024.07.tar.bz2 +sha256 78e8bfc382fe388f9b55aa1daf8c563522a037779b5d4c349d1415e381f1243e u-boot-2026.07.tar.bz2 diff --git a/board/ti/am62x-sk/patches/linux/linux.hash b/board/ti/am62x-sk/patches/linux/linux.hash index 6c7685ad4d0..1a1d6e9a3ef 100644 --- a/board/ti/am62x-sk/patches/linux/linux.hash +++ b/board/ti/am62x-sk/patches/linux/linux.hash @@ -1,2 +1,2 @@ -# Locally calculated -sha256 4a168aed2de5a81aadd90ba2b153860a98d99bfc34651936e17f18e54f01ba8c linux-6.12.36.tar.xz +# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc +sha256 164dc9d1f6c93c61a15e1f071c48379b467f2b17c469cce7223471968208ed03 linux-6.12.112.tar.xz diff --git a/board/ti/am62x-sk/patches/uboot/uboot.hash b/board/ti/am62x-sk/patches/uboot/uboot.hash index 440526977bd..66c72d3afd5 100644 --- a/board/ti/am62x-sk/patches/uboot/uboot.hash +++ b/board/ti/am62x-sk/patches/uboot/uboot.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 0f933f6c5a426895bf306e93e6ac53c60870e4b54cda56d95211bec99e63bec7 u-boot-2025.07.tar.bz2 +sha256 3f856da3cbbc93af51ff95fde18588a348b4a26723b01d9841e999d988481015 u-boot-2026.10.tar.bz2 diff --git a/board/ti/am64x-sk/patches/arm-trusted-firmware/arm-trusted-firmware.hash b/board/ti/am64x-sk/patches/arm-trusted-firmware/arm-trusted-firmware.hash index 8b77e1f1653..2e24bcd0de5 100644 --- a/board/ti/am64x-sk/patches/arm-trusted-firmware/arm-trusted-firmware.hash +++ b/board/ti/am64x-sk/patches/arm-trusted-firmware/arm-trusted-firmware.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 c0f23ccc71c49989e9ad238acf334473c17b7c88f79a20c829c3d443e3794a22 arm-trusted-firmware-v2.11-git4.tar.gz +sha256 b807d8bf190b7c46b4260729b4bbe2f7df83cd1086edcb181d66595ae6598d23 arm-trusted-firmware-v2.15.0-git4.tar.gz diff --git a/board/ti/am64x-sk/patches/linux/linux.hash b/board/ti/am64x-sk/patches/linux/linux.hash index 53eb1438945..49bf75b9242 100644 --- a/board/ti/am64x-sk/patches/linux/linux.hash +++ b/board/ti/am64x-sk/patches/linux/linux.hash @@ -1,2 +1,2 @@ -# Locally calculated -sha256 774698422ee54c5f1e704456f37c65c06b51b4e9a8b0866f34580d86fef8e226 linux-6.10.tar.xz +# From https://www.kernel.org/pub/linux/kernel/v7.x/sha256sums.asc +sha256 2feaa70453e91f541be6a5c9078d8168e081af45a3d9718054850538cff2ebf3 linux-7.2.10.tar.xz diff --git a/board/ti/am64x-sk/patches/ti-k3-r5-loader/0001-pylibfdt-Replace-removed-SWIG-Python-2-compatibility.patch b/board/ti/am64x-sk/patches/ti-k3-r5-loader/0001-pylibfdt-Replace-removed-SWIG-Python-2-compatibility.patch new file mode 100644 index 00000000000..10968ce8760 --- /dev/null +++ b/board/ti/am64x-sk/patches/ti-k3-r5-loader/0001-pylibfdt-Replace-removed-SWIG-Python-2-compatibility.patch @@ -0,0 +1,67 @@ +From 527115ef6783cec49e5610c523c124b399011361 Mon Sep 17 00:00:00 2001 +From: Jaipaul Cheernam +Date: Tue, 11 Aug 2026 15:34:33 +0200 +Subject: [PATCH] pylibfdt: Replace removed SWIG Python 2 compatibility macros +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +SWIG 4.5.0 removed Python 2 compatibility macros (PyInt_*, PyString_*) +from its runtime header pyhead.swg (see commit 79f7a2b7cb7d). Replace +them with their Python 3 C API equivalents: + +- PyString_FromString -> PyUnicode_FromString +- PyString_AsString -> PyBytes_AsString +- PyInt_AsLong -> PyLong_AsLong + +The replacements are safe since the macros were already aliased to +these exact functions in SWIG's Python 3 code path. + +This is a backport of dtc commit 5008d1d6a356 ("pylibfdt: Replace +removed SWIG Python 2 compatibility macros"). + +Signed-off-by: Jaipaul Cheernam +Reviewed-by: Jérémie Dautheribes +Tested-by: Jérémie Dautheribes +Signed-off-by: Peter Robinson +Reviewed-by: Peter Robinson +Upstream: https://git.u-boot-project.org/u-boot/u-boot/-/commit/527115ef6783cec49e5610c523c124b399011361 +Signed-off-by: Julien Olivain +--- + scripts/dtc/pylibfdt/libfdt.i_shipped | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +diff --git a/scripts/dtc/pylibfdt/libfdt.i_shipped b/scripts/dtc/pylibfdt/libfdt.i_shipped +index e4659489a96ab..326a15c7941e3 100644 +--- a/scripts/dtc/pylibfdt/libfdt.i_shipped ++++ b/scripts/dtc/pylibfdt/libfdt.i_shipped +@@ -1033,7 +1033,7 @@ typedef uint32_t fdt32_t; + PyObject *buff; + + if ($1) { +- resultobj = PyString_FromString( ++ resultobj = PyUnicode_FromString( + fdt_string(fdt1, fdt32_to_cpu($1->nameoff))); + buff = PyByteArray_FromStringAndSize( + (const char *)($1 + 1), fdt32_to_cpu($1->len)); +@@ -1064,13 +1064,13 @@ typedef uint32_t fdt32_t; + } + $1 = PyBytes_AsString($input); + %#else +- $1 = PyString_AsString($input); /* char *str */ ++ $1 = PyBytes_AsString($input); /* char *str */ + %#endif + } + + /* typemaps used for fdt_next_node() */ + %typemap(in, numinputs=1) int *depth (int depth) { +- depth = (int) PyInt_AsLong($input); ++ depth = (int) PyLong_AsLong($input); + $1 = &depth; + } + + +base-commit: 1262e50a34a0e01f974e8d909c5b255f8fa7199e +-- +2.55.0 + diff --git a/board/ti/am64x-sk/patches/uboot/0001-pylibfdt-Replace-removed-SWIG-Python-2-compatibility.patch b/board/ti/am64x-sk/patches/uboot/0001-pylibfdt-Replace-removed-SWIG-Python-2-compatibility.patch new file mode 100644 index 00000000000..10968ce8760 --- /dev/null +++ b/board/ti/am64x-sk/patches/uboot/0001-pylibfdt-Replace-removed-SWIG-Python-2-compatibility.patch @@ -0,0 +1,67 @@ +From 527115ef6783cec49e5610c523c124b399011361 Mon Sep 17 00:00:00 2001 +From: Jaipaul Cheernam +Date: Tue, 11 Aug 2026 15:34:33 +0200 +Subject: [PATCH] pylibfdt: Replace removed SWIG Python 2 compatibility macros +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +SWIG 4.5.0 removed Python 2 compatibility macros (PyInt_*, PyString_*) +from its runtime header pyhead.swg (see commit 79f7a2b7cb7d). Replace +them with their Python 3 C API equivalents: + +- PyString_FromString -> PyUnicode_FromString +- PyString_AsString -> PyBytes_AsString +- PyInt_AsLong -> PyLong_AsLong + +The replacements are safe since the macros were already aliased to +these exact functions in SWIG's Python 3 code path. + +This is a backport of dtc commit 5008d1d6a356 ("pylibfdt: Replace +removed SWIG Python 2 compatibility macros"). + +Signed-off-by: Jaipaul Cheernam +Reviewed-by: Jérémie Dautheribes +Tested-by: Jérémie Dautheribes +Signed-off-by: Peter Robinson +Reviewed-by: Peter Robinson +Upstream: https://git.u-boot-project.org/u-boot/u-boot/-/commit/527115ef6783cec49e5610c523c124b399011361 +Signed-off-by: Julien Olivain +--- + scripts/dtc/pylibfdt/libfdt.i_shipped | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +diff --git a/scripts/dtc/pylibfdt/libfdt.i_shipped b/scripts/dtc/pylibfdt/libfdt.i_shipped +index e4659489a96ab..326a15c7941e3 100644 +--- a/scripts/dtc/pylibfdt/libfdt.i_shipped ++++ b/scripts/dtc/pylibfdt/libfdt.i_shipped +@@ -1033,7 +1033,7 @@ typedef uint32_t fdt32_t; + PyObject *buff; + + if ($1) { +- resultobj = PyString_FromString( ++ resultobj = PyUnicode_FromString( + fdt_string(fdt1, fdt32_to_cpu($1->nameoff))); + buff = PyByteArray_FromStringAndSize( + (const char *)($1 + 1), fdt32_to_cpu($1->len)); +@@ -1064,13 +1064,13 @@ typedef uint32_t fdt32_t; + } + $1 = PyBytes_AsString($input); + %#else +- $1 = PyString_AsString($input); /* char *str */ ++ $1 = PyBytes_AsString($input); /* char *str */ + %#endif + } + + /* typemaps used for fdt_next_node() */ + %typemap(in, numinputs=1) int *depth (int depth) { +- depth = (int) PyInt_AsLong($input); ++ depth = (int) PyLong_AsLong($input); + $1 = &depth; + } + + +base-commit: 1262e50a34a0e01f974e8d909c5b255f8fa7199e +-- +2.55.0 + diff --git a/board/ti/am64x-sk/patches/uboot/uboot.hash b/board/ti/am64x-sk/patches/uboot/uboot.hash index fe9b4f53dc6..ff6e4ed2e2f 100644 --- a/board/ti/am64x-sk/patches/uboot/uboot.hash +++ b/board/ti/am64x-sk/patches/uboot/uboot.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 f591da9ab90ef3d6b3d173766d0ddff90c4ed7330680897486117df390d83c8f u-boot-2024.07.tar.bz2 +sha256 78e8bfc382fe388f9b55aa1daf8c563522a037779b5d4c349d1415e381f1243e u-boot-2026.07.tar.bz2 diff --git a/board/ti/common/am6xx/post-build.sh b/board/ti/common/am6xx/post-build.sh index d066e28fd0d..c32cfe25b29 100755 --- a/board/ti/common/am6xx/post-build.sh +++ b/board/ti/common/am6xx/post-build.sh @@ -1,4 +1,5 @@ -#!/bin/sh -x +#!/bin/sh +set -eu # genimage will need to find the extlinux.conf # in the binaries directory diff --git a/board/ti/tda4vm-sk/extlinux.conf b/board/ti/tda4vm-sk/extlinux.conf new file mode 100644 index 00000000000..582d510b5d4 --- /dev/null +++ b/board/ti/tda4vm-sk/extlinux.conf @@ -0,0 +1,5 @@ +default buildroot +label buildroot + kernel /Image + devicetreedir / +append root=/dev/mmcblk1p2 rootwait rw console=ttyS2,115200n8 diff --git a/board/ti/tda4vm-sk/genimage.cfg b/board/ti/tda4vm-sk/genimage.cfg new file mode 100644 index 00000000000..b5ba2d21db5 --- /dev/null +++ b/board/ti/tda4vm-sk/genimage.cfg @@ -0,0 +1,33 @@ +image boot.vfat { + vfat { + files = { + "sysfw.itb", + "tiboot3.bin", + "tispl.bin", + "u-boot.img", + "Image", + "ti", + "extlinux", + } + + label = "boot" + } + + size = 64M +} + +image sdcard.img { + hdimage { + } + + partition u-boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +} diff --git a/board/ti/tda4vm-sk/patches/linux/linux.hash b/board/ti/tda4vm-sk/patches/linux/linux.hash new file mode 100644 index 00000000000..eb4dcee9586 --- /dev/null +++ b/board/ti/tda4vm-sk/patches/linux/linux.hash @@ -0,0 +1,2 @@ +# From https://www.kernel.org/pub/linux/kernel/v6.x/sha256sums.asc +sha256 4f21c01f4d04c1d1b3ed794153f8900802c92497be620b07c4869530f2d28ee3 linux-6.18.16.tar.xz diff --git a/board/ti/tda4vm-sk/patches/ti-k3-r5-loader/ti-k3-r5-loader.hash b/board/ti/tda4vm-sk/patches/ti-k3-r5-loader/ti-k3-r5-loader.hash new file mode 100644 index 00000000000..b6a925ea4e8 --- /dev/null +++ b/board/ti/tda4vm-sk/patches/ti-k3-r5-loader/ti-k3-r5-loader.hash @@ -0,0 +1,2 @@ +# Locally calculated +sha256 b60d5865cefdbc75da8da4156c56c458e00de75a49b80c1a2e58a96e30ad0d54 u-boot-2026.01.tar.bz2 diff --git a/board/ti/tda4vm-sk/patches/uboot/uboot.hash b/board/ti/tda4vm-sk/patches/uboot/uboot.hash new file mode 100644 index 00000000000..b6a925ea4e8 --- /dev/null +++ b/board/ti/tda4vm-sk/patches/uboot/uboot.hash @@ -0,0 +1,2 @@ +# Locally calculated +sha256 b60d5865cefdbc75da8da4156c56c458e00de75a49b80c1a2e58a96e30ad0d54 u-boot-2026.01.tar.bz2 diff --git a/board/ti/tda4vm-sk/post-build.sh b/board/ti/tda4vm-sk/post-build.sh new file mode 100755 index 00000000000..8dae08a47cd --- /dev/null +++ b/board/ti/tda4vm-sk/post-build.sh @@ -0,0 +1,5 @@ +#!/bin/sh + +BOARD_DIR="$(dirname "$0")" + +install -m 0644 -D "$BOARD_DIR"/extlinux.conf "$BINARIES_DIR"/extlinux/extlinux.conf diff --git a/board/ti/tda4vm-sk/readme.txt b/board/ti/tda4vm-sk/readme.txt new file mode 100644 index 00000000000..b3e789be805 --- /dev/null +++ b/board/ti/tda4vm-sk/readme.txt @@ -0,0 +1,36 @@ +Texas Instruments SK-TDA4VM Test and Development Board + +Description +=========== + +This configuration will build a complete image for the TI SK-TDA4VM +board: https://www.ti.com/tool/SK-TDA4VM + +How to Build +============ + +Select the default configuration for the target: + +$ make ti_tda4vm_sk_defconfig + +Optional: modify the configuration: + +$ make menuconfig + +Build: + +$ make + +To copy the resultimg output image file to an SD card use dd: + +$ dd if=output/images/sdcard.img of=/dev/sdX bs=1M + +How to Run +========== + +Insert the SD card into the SK-TDA4VM board, and power it up through the +USB Type-C connector. The system should come up. You can use a +micro-USB cable to connect to the connector labeled UART to +communicate with the board. + +User's guide : https://www.ti.com/lit/ug/spruj21e/spruj21e.pdf diff --git a/board/versal/genimage.cfg b/board/versal/genimage.cfg index d994d3a2bfb..8870777f19b 100644 --- a/board/versal/genimage.cfg +++ b/board/versal/genimage.cfg @@ -10,7 +10,7 @@ image boot.vfat { } } - size = 32M + size = 64M } image sdcard.img { diff --git a/board/versal/post-image.sh b/board/versal/post-image.sh index b5ce2e3f0cd..4a810ff15ba 100755 --- a/board/versal/post-image.sh +++ b/board/versal/post-image.sh @@ -2,17 +2,12 @@ # By default U-Boot loads DTB from a file named "system.dtb", so # let's use a symlink with that name that points to the *first* -# devicetree listed in the config. - -FIRST_DT=$(sed -nr \ - -e 's|^BR2_LINUX_KERNEL_INTREE_DTS_NAME="(xilinx/)?([-_/[:alnum:]\\.]*).*"$|\2|p' \ - "${BR2_CONFIG}") - -[ -z "${FIRST_DT}" ] || ln -fs "${FIRST_DT}.dtb" "${BINARIES_DIR}/system.dtb" +# devicetree in the LINUX_DTBS list. +LINUX_DTBS="$(make --no-print-directory VARS=LINUX_DTBS printvars)" +ln -fs "$(basename "${LINUX_DTBS%% *}")" "${BINARIES_DIR}/system.dtb" BOARD_DIR="$(dirname "$0")" -mkdir -p "${BINARIES_DIR}" cat <<-__HEADER_EOF > "${BINARIES_DIR}/bootgen.bif" the_ROM_image: { diff --git a/board/versal/readme.txt b/board/versal/readme.txt index cd308a12263..80ab068495e 100644 --- a/board/versal/readme.txt +++ b/board/versal/readme.txt @@ -5,19 +5,23 @@ Xilinx Versal boards: Supported Versal Boards: Xilinx VCK190 board Xilinx VEK280 board +Xilinx VPK120 board Xilinx VPK180 board ****************************************** Evaluation board features can be found here with the links below. VCK190: -https://www.xilinx.com/products/boards-and-kits/vck190.html +https://www.amd.com/en/products/adaptive-socs-and-fpgas/evaluation-boards/vck190.html VEK280: -https://www.xilinx.com/products/boards-and-kits/vek280.html +https://www.amd.com/en/products/adaptive-socs-and-fpgas/evaluation-boards/vek280.html + +VPK120: +https://www.amd.com/en/products/adaptive-socs-and-fpgas/evaluation-boards/vpk120.html VPK180: -https://www.xilinx.com/products/boards-and-kits/vpk180.html +https://www.amd.com/en/products/adaptive-socs-and-fpgas/evaluation-boards/vpk180.html How to build it diff --git a/board/versal/vek280/patches/linux/0001-arm64-versal-vek280-prebuilt-pdi-is-incorrect.patch b/board/versal/vek280/patches/linux/0001-arm64-versal-vek280-prebuilt-pdi-is-incorrect.patch deleted file mode 100644 index 357c0abb2fb..00000000000 --- a/board/versal/vek280/patches/linux/0001-arm64-versal-vek280-prebuilt-pdi-is-incorrect.patch +++ /dev/null @@ -1,50 +0,0 @@ -From e79a96ff89b11fea03680633ab830894288ee9f0 Mon Sep 17 00:00:00 2001 -From: Neal Frager -Date: Thu, 28 Nov 2024 07:50:28 +0000 -Subject: [PATCH] arm64: versal: vek280 prebuilt pdi is incorrect - -The prebuilt vpl_gen_fixed.pdi for the vek280 is incorrect and does not define -the DDR memory region for address 0x8 0000 0000 - 0x8 8000 0000. For this -reason, the intree Linux dts memory node for the vek280 will not boot. - -This patch works around the issue until the prebuilt pdi file is changed. - -https://github.com/Xilinx/soc-prebuilt-firmware/blob/xilinx_v2024.2/vek280-versal/vpl_gen_fixed.pdi - -Upstream: n/a - -Signed-off-by: Neal Frager ---- - arch/arm64/boot/dts/xilinx/versal-vek280-revA.dts | 2 +- - arch/arm64/boot/dts/xilinx/versal-vek280-revB.dts | 2 +- - 2 files changed, 2 insertions(+), 2 deletions(-) - -diff --git a/arch/arm64/boot/dts/xilinx/versal-vek280-revA.dts b/arch/arm64/boot/dts/xilinx/versal-vek280-revA.dts -index ad5d590318e6..a306eacca5b3 100644 ---- a/arch/arm64/boot/dts/xilinx/versal-vek280-revA.dts -+++ b/arch/arm64/boot/dts/xilinx/versal-vek280-revA.dts -@@ -19,7 +19,7 @@ / { - - memory: memory@0 { - device_type = "memory"; -- reg = <0 0 0 0x80000000>, <0x8 0x0 0x1 0x80000000>; /* 2GB + 6GB */ -+ reg = <0 0 0 0x80000000>, <0x8 0x80000000 0x1 0x80000000>; /* 2GB + 6GB */ - }; - - chosen { -diff --git a/arch/arm64/boot/dts/xilinx/versal-vek280-revB.dts b/arch/arm64/boot/dts/xilinx/versal-vek280-revB.dts -index a5ee80a373e2..ba54a5ef0c73 100644 ---- a/arch/arm64/boot/dts/xilinx/versal-vek280-revB.dts -+++ b/arch/arm64/boot/dts/xilinx/versal-vek280-revB.dts -@@ -19,7 +19,7 @@ / { - - memory: memory@0 { - device_type = "memory"; -- reg = <0 0 0 0x80000000>, <0x8 0x00000000 0x1 0x80000000>; /* 2GB + 6GB */ -+ reg = <0 0 0 0x80000000>, <0x8 0x80000000 0x1 0x80000000>; /* 2GB + 6GB */ - }; - - chosen { --- -2.25.1 - diff --git a/board/versal2/genimage.cfg b/board/versal2/genimage.cfg new file mode 120000 index 00000000000..3aa5543165e --- /dev/null +++ b/board/versal2/genimage.cfg @@ -0,0 +1 @@ +../versal/genimage.cfg \ No newline at end of file diff --git a/board/versal2/post-build.sh b/board/versal2/post-build.sh new file mode 120000 index 00000000000..0130ff23d2c --- /dev/null +++ b/board/versal2/post-build.sh @@ -0,0 +1 @@ +../zynqmp/post-build.sh \ No newline at end of file diff --git a/board/versal2/post-image.sh b/board/versal2/post-image.sh new file mode 100755 index 00000000000..3037e0a5ab1 --- /dev/null +++ b/board/versal2/post-image.sh @@ -0,0 +1,37 @@ +#!/bin/sh + +# By default U-Boot loads DTB from a file named "system.dtb". +# With versal2, there is no default dts in the Linux kernel tree +# because the default is the same as the u-boot.dtb. This means +# it is necessary to cover two cases, a custom dts or the default. +# The BR2_LINUX_KERNEL_DTS_SUPPORT will only be set for custom dts +# files, so it can be used for checking which case is configured. +if grep -Eq "^BR2_LINUX_KERNEL_DTS_SUPPORT=y$" "${BR2_CONFIG}"; then + LINUX_DTBS="$(make --no-print-directory VARS=LINUX_DTBS printvars)" + ln -fs "$(basename "${LINUX_DTBS%% *}")" "${BINARIES_DIR}/system.dtb" +else + ln -fs "u-boot.dtb" "${BINARIES_DIR}/system.dtb" +fi + +BOARD_DIR="$(dirname "$0")" + +cat <<-__HEADER_EOF > "${BINARIES_DIR}/bootgen.bif" + the_ROM_image: + { + image { + { type=bootimage, file=${BINARIES_DIR}/boot.pdi } + { type=bootloader, file=${BINARIES_DIR}/plm.elf } + { core=asu, file=${BINARIES_DIR}/asufw.elf } + } + image { + id = 0x1c000000, name=apu_subsystem + { type=raw, load=0x01000000, file=${BINARIES_DIR}/u-boot.dtb } + { core=a78-0, cluster=0, exception_level=el-3, trustzone, file=${BINARIES_DIR}/bl31.elf } + { core=a78-0, cluster=0, exception_level=el-1, trustzone, load=0x1800000, file=${BINARIES_DIR}/tee-raw.bin } + { core=a78-0, cluster=0, exception_level=el-2, file=${BINARIES_DIR}/u-boot.elf } + } + } + __HEADER_EOF + +"${HOST_DIR}/bin/bootgen" -arch versal_2ve_2vm -image "${BINARIES_DIR}/bootgen.bif" -o "${BINARIES_DIR}/boot.bin" -w on +support/scripts/genimage.sh -c "${BOARD_DIR}/genimage.cfg" diff --git a/board/versal2/readme.txt b/board/versal2/readme.txt new file mode 100644 index 00000000000..4498392bcb3 --- /dev/null +++ b/board/versal2/readme.txt @@ -0,0 +1,182 @@ +This document describes the Buildroot support for the following +Xilinx Versal Gen2 boards: + +****************************************** +Supported Versal Gen2 Boards: +Xilinx VEK385 board +****************************************** + +Evaluation board features can be found here with the links below. + +VEK385: +https://www.amd.com/en/products/adaptive-socs-and-fpgas/evaluation-boards/vek385.html + +How to build it +=============== + +Configure Buildroot: + + $ make versal2_vek385_defconfig + +Compile everything and build the rootfs image: + + $ make + +Result of the build +------------------- + +After building, you should get a tree like this: + + output/images/ + +-- asufw.elf + +-- bl31.elf + +-- boot.bin + +-- bootgen.bif + +-- boot.pdi + +-- boot.vfat + +-- extlinux.conf + +-- Image + +-- plm.elf + +-- rootfs.ext2 + +-- rootfs.ext4 -> rootfs.ext2 + +-- sdcard.img + +-- system.dtb -> u-boot.dtb + +-- tee-raw.bin + +-- u-boot.dtb + `-- u-boot.elf + +How to write the SD card +======================== + +WARNING! This will destroy all the card content. Use with care! + +The sdcard.img file is a complete bootable image ready to be written +on the boot medium. To install it, simply copy the image to an SD +card: + + # dd if=output/images/sdcard.img of=/dev/sdX + +Where 'sdX' is the device node of the SD. + +Eject the SD card, insert it in the board, and power it up. + +Support for other boards: +========================= + +If you want to build a system for other boards based on the same SoC, and the +board is already supported by the upstream kernel, U-Boot, and +xilinx-prebuilt, you simply need to change the following Buildroot options: + + - U-Boot (BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="DEVICE_TREE=") + - xilinx-prebuilt (BR2_TARGET_XILINX_PREBUILT_BOARD) + +Custom versal2 board support: + +To generate a boot.bin image, Versal2 boards require a PDI (Programmable Device +Image) generated by Xilinx Vivado which contains all the hardware specific +boot information, such as clock, MIO and DDR initializations as well as any +customizations in the programmable logic. Since this PDI can only be generated +by Xilinx Vivado, Buildroot needs access to the prebuilt image. The Buildroot +xilinx-prebuilt package has support for Versal2 XSA files exported from Xilinx +Vivado. + +Using the option BR2_TARGET_XILINX_PREBUILT_VERSAL_XSA, Buildroot can obtain +the prebuilt PDI from the XSA file. + +1) Start with a defconfig supported by Buildroot (e.g. VEK385) + make versal2_vek385_defconfig + +2) make menuconfig + Visit the following menu and enable BR2_TARGET_XILINX_PREBUILT_VERSAL_XSA + + Bootloaders ---> + xilinx-prebuilt ---> + [*] download a prebuilt Versal XSA + +3) Within the same menuconfig, configure location of XSA. It can be in the + local file system or downloadable from an https:// location. + + Bootloaders ---> + xilinx-prebuilt ---> + () URL of custom XSA + +4) make + +The resulting output/images will contain a boot.bin that includes the custom +PDI file extracted from the Xilinx Vivado exported XSA file. + +How to write boot.bin to VEK385 OSPI boot flash +======================================================= + +The VEK385 cannot be configured to boot from the SD card directly because it +is connected to the 2VE3858 by a USB to SD card bridge and not connected +directly. For this reason, the boot.bin needs to be in the OSPI flash for +booting the first boot stage, and u-boot can then boot Linux and the file +system from the SD card. + +For writing the boot.bin file to the OSPI flash the first time, it is +recommended to use the board system controller with the instructions on the +wiki page below: +https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/2273738753/Versal+Evaluation+Board+-+System+Controller+-+Update+7 + +Once the first boot.bin has been flashed and the VEK385 is able to boot into +u-boot, u-boot can then be used for subsequent updates to the OSPI flash using +the instructions below. + +VEK385 U-Boot Flashing Instructions: + $ usb start + $ sf probe + $ fatload usb 0 0x40000000 boot.bin + $ sf erase 0x0 +$filesize + $ sf write 0x40000000 0x0 $filesize + +If a valid boot.bin is already in the OSPI flash, it is possible to boot the +Buildroot generated SD card image without updating the OSPI boot.bin image, so +this is an optional step when just updating Linux and the file system. + +IMPORTANT NOTES for the VEK385 +======================================================= + +1) The base-design.pdi on the https://github.com/Xilinx/soc-prebuilt-firmware +repo is designed for revB of the VEK385 and will not work properly on revA. +Users should either create their own Vivado XSA file if they have a revA +board, or make sure to get a VEK385 revB or newer board. + +2) The default u-boot bootcmd is not the distro_bootcmd that buildroot +expects. When booting for the first time, please stop the boot in u-boot +and run the following commands: + $ setenv bootcmd 'run distro_bootcmd' + $ saveenv + $ boot + +3) When using the 2025.2 release, the default u-boot env value for fdt_addr_r +is 0x21000000 which overlaps with the OS image causing the following boot +failure: + +Found /extlinux/extlinux.conf +Retrieving file: /extlinux/extlinux.conf +1: linux +Retrieving file: /Image +append: console="ttyAMA1,115200" root="/dev/sdd2" rw rootwait +Retrieving file: /system.dtb +## Flattened Device Tree blob at 21000000 + Booting using the fdt blob at 0x21000000 +ERROR: FDT image overlaps OS image (OS=20200000..21cf0000) +EXTLINUX FAILED: continuing... + +This will be fixed with 2026.1 and future releases, but for 2025.2, users +must run the following u-boot commands to change the default value. + $ setenv fdt_addr_r 0x31000000 + $ saveenv + +4) Depending on the device tree used, the USB->SD card interface may not be +probed as /dev/sdd as the probing order can vary based on the device tree +configuration. To deal with this, users will need to change the last +parameter of BR2_ROOTFS_POST_SCRIPT_ARGS to sda2, sdb2 or sdc2 depending on +which corresponds to their configuration's USB->SD card. + +For example, the default value in the versal2_vek385_defconfig: +BR2_ROOTFS_POST_SCRIPT_ARGS="ttyAMA1,115200 sdd2" + +If the USB->SD card interface probed first, this would need to be changed to: +BR2_ROOTFS_POST_SCRIPT_ARGS="ttyAMA1,115200 sda2" diff --git a/board/visionfive2/genimage.cfg b/board/visionfive2/genimage.cfg index 8133e740c0d..af7bc70d1ab 100644 --- a/board/visionfive2/genimage.cfg +++ b/board/visionfive2/genimage.cfg @@ -5,16 +5,6 @@ image sdcard.img { partition-table-type = "gpt" } - partition spl { - partition-type-uuid = 2E54B353-1271-4842-806F-E436D6AF6985 - image = "u-boot-spl.bin.normal.out" - } - - partition uboot { - partition-type-uuid = BC13C2FF-59E6-4262-A352-B275FD6F7172 - image = "u-boot.itb" - } - partition rootfs { partition-type-uuid = 0FC63DAF-8483-4772-8E79-3D69D8477DE4 bootable = true diff --git a/board/visionfive2/linux_defconfig b/board/visionfive2/linux_defconfig index 06942928b54..1ca11f4097e 100644 --- a/board/visionfive2/linux_defconfig +++ b/board/visionfive2/linux_defconfig @@ -3,7 +3,6 @@ CONFIG_COMPILE_TEST=y CONFIG_DEFAULT_HOSTNAME="StarFive" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y -CONFIG_USELIB=y CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_BPF_SYSCALL=y @@ -22,7 +21,6 @@ CONFIG_PERF_EVENTS=y CONFIG_SOC_STARFIVE=y CONFIG_NONPORTABLE=y CONFIG_SMP=y -CONFIG_RISCV_AMP=y CONFIG_HZ_100=y CONFIG_HIBERNATION=y CONFIG_PM_STD_PARTITION="PARTLABEL=hibernation" @@ -40,6 +38,7 @@ CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y CONFIG_CPUFREQ_DT=y # CONFIG_SECCOMP is not set +# CONFIG_GCC_PLUGINS is not set CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_BINFMT_MISC=y @@ -59,6 +58,7 @@ CONFIG_NF_CONNTRACK=y CONFIG_NF_TABLES=y CONFIG_NFT_CT=y CONFIG_NFT_COMPAT=y +CONFIG_NETFILTER_XTABLES_LEGACY=y CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y CONFIG_NETFILTER_XT_MATCH_IPCOMP=y CONFIG_NETFILTER_XT_MATCH_IPRANGE=y @@ -69,6 +69,7 @@ CONFIG_NETFILTER_XT_MATCH_SOCKET=y CONFIG_NETFILTER_XT_MATCH_STATE=y CONFIG_NETFILTER_XT_MATCH_STRING=y CONFIG_NETFILTER_XT_MATCH_U32=y +CONFIG_IP_NF_IPTABLES_LEGACY=y CONFIG_NF_TABLES_IPV4=y CONFIG_NFT_DUP_IPV4=y CONFIG_NFT_FIB_IPV4=y @@ -87,7 +88,6 @@ CONFIG_BT_RFCOMM_TTY=y CONFIG_BT_BNEP=y CONFIG_BT_BNEP_MC_FILTER=y CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_AICUSB=y CONFIG_CFG80211=y CONFIG_MAC80211=y CONFIG_RFKILL=y @@ -104,7 +104,6 @@ CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_ADV_OPTIONS=y CONFIG_MTD_SPI_NOR=y -CONFIG_OF_CONFIGFS=y CONFIG_BLK_DEV_LOOP=y CONFIG_VIRTIO_BLK=y CONFIG_BLK_DEV_NVME=y @@ -159,21 +158,15 @@ CONFIG_MARVELL_PHY=y CONFIG_MICREL_PHY=y CONFIG_MICROCHIP_PHY=y CONFIG_MOTORCOMM_PHY=y -CONFIG_IPMS_CAN=y CONFIG_IWLWIFI=y CONFIG_IWLDVM=y CONFIG_IWLMVM=y # CONFIG_RTL_CARDS is not set -CONFIG_USB_WIFI_ECR6600U=y -CONFIG_AIC_WLAN_SUPPORT=y -CONFIG_AIC8800_WLAN_SUPPORT=m -CONFIG_AIC_LOADFW_SUPPORT=m CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_GOODIX=y -CONFIG_TOUCHSCREEN_TINKER_FT5406=y CONFIG_SERIO_LIBPS2=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y @@ -205,7 +198,6 @@ CONFIG_THERMAL=y CONFIG_CPU_THERMAL=y CONFIG_DEVFREQ_THERMAL=y CONFIG_THERMAL_EMULATION=y -# CONFIG_HISI_THERMAL is not set CONFIG_WATCHDOG=y CONFIG_WATCHDOG_SYSFS=y CONFIG_MFD_AXP20X_I2C=y @@ -221,10 +213,7 @@ CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_V4L_MEM2MEM_DRIVERS=y CONFIG_VIDEO_CADENCE_CSI2RX=y CONFIG_VIDEO_WAVE_VPU=m -CONFIG_VIN_SENSOR_OV4689=y -CONFIG_VIDEO_STF_VIN=y CONFIG_VIDEO_IMX219=y -CONFIG_VIDEO_IMX708=y # CONFIG_CXD2880_SPI_DRV is not set # CONFIG_MEDIA_TUNER_E4000 is not set # CONFIG_MEDIA_TUNER_FC0011 is not set @@ -371,13 +360,8 @@ CONFIG_VIDEO_IMX708=y # CONFIG_DVB_SP2 is not set CONFIG_DRM=y CONFIG_DRM_PANEL_JADARD_JD9365DA_H3=y -CONFIG_DRM_PANEL_STARFIVE_JADARD=y CONFIG_DRM_PANEL_SIMPLE=y CONFIG_DRM_TOSHIBA_TC358762=y -CONFIG_DRM_VERISILICON=y -CONFIG_STARFIVE_INNO_HDMI=y -CONFIG_STARFIVE_DSI=y -CONFIG_DRM_IMG_ROGUE=y CONFIG_FB=y CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_SOUND=y @@ -386,10 +370,8 @@ CONFIG_SND_USB_AUDIO=y CONFIG_SND_SOC=y CONFIG_SND_DESIGNWARE_I2S=y CONFIG_SND_SOC_RZ=m -CONFIG_SND_SOC_STARFIVE=y CONFIG_SND_SOC_JH7110_PWMDAC=y CONFIG_SND_SOC_JH7110_TDM=y -CONFIG_SND_SOC_AC108=y CONFIG_SND_SOC_WM8960=y CONFIG_SND_SIMPLE_CARD=y CONFIG_UHID=y @@ -477,7 +459,6 @@ CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_STARFIVE=y CONFIG_RTC_DRV_GOLDFISH=y CONFIG_DMADEVICES=y CONFIG_AMBA_PL08X=y @@ -492,22 +473,16 @@ CONFIG_CLK_STARFIVE_JH7110_STG=y CONFIG_CLK_STARFIVE_JH7110_ISP=y CONFIG_CLK_STARFIVE_JH7110_VOUT=y CONFIG_MAILBOX=y -CONFIG_STARFIVE_IPI_MBOX=y -CONFIG_STARFIVE_MBOX=m -CONFIG_STARFIVE_MBOX_TEST=m # CONFIG_IOMMU_SUPPORT is not set CONFIG_RPMSG_CHAR=y CONFIG_RPMSG_CTRL=y -CONFIG_RPMSG_STARFIVE=m CONFIG_RPMSG_VIRTIO=y CONFIG_PM_DEVFREQ=y CONFIG_IIO=y CONFIG_IIO_ST_ACCEL_3AXIS=y CONFIG_PWM=y -CONFIG_PWM_OCORES=y CONFIG_PHY_STARFIVE_JH7110_PCIE=y CONFIG_PHY_STARFIVE_JH7110_USB=y -CONFIG_PHY_M31_DPHY_RX0=y CONFIG_RAS=y CONFIG_EXT4_FS=y CONFIG_EXT4_FS_POSIX_ACL=y @@ -546,7 +521,7 @@ CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_INIT_STACK_NONE=y CONFIG_CRYPTO_USER=y -CONFIG_CRYPTO_TEST=m +CONFIG_CRYPTO_BENCHMARK=m CONFIG_CRYPTO_USER_API_HASH=y CONFIG_CRYPTO_USER_API_SKCIPHER=y CONFIG_CRYPTO_USER_API_RNG=y diff --git a/board/visionfive2/overlay/boot/extlinux/extlinux.conf b/board/visionfive2/overlay/boot/extlinux/extlinux.conf index fd772f3675b..6c290f519c2 100644 --- a/board/visionfive2/overlay/boot/extlinux/extlinux.conf +++ b/board/visionfive2/overlay/boot/extlinux/extlinux.conf @@ -1,4 +1,4 @@ label linux kernel /boot/Image - devicetree /boot/jh7110-starfive-visionfive-2-v1.3b.dtb - append console=ttyS0,115200 root=/dev/mmcblk1p3 + fdtdir /boot + append console=ttyS0,115200 root=/dev/mmcblk1p1 rootwait diff --git a/board/visionfive2/patches/linux/linux.hash b/board/visionfive2/patches/linux/linux.hash index 1213da86b17..63b8047edc0 100644 --- a/board/visionfive2/patches/linux/linux.hash +++ b/board/visionfive2/patches/linux/linux.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 643142c1b5991560dd12f950825cc19e4497b95b82641918ecff1177f4130c1d linux-6.12.24.tar.xz +sha256 f410638061a165c12f42ab871d2f3fcd525515359b5faeee80969cff84524df9 linux-6.18.55.tar.xz diff --git a/board/visionfive2/patches/opensbi/opensbi.hash b/board/visionfive2/patches/opensbi/opensbi.hash index d7893a1deec..5e2e695bc1d 100644 --- a/board/visionfive2/patches/opensbi/opensbi.hash +++ b/board/visionfive2/patches/opensbi/opensbi.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 d11702103f177a2914e94eec57ce5ed820296d874f6b6525c4482e55d71a3667 opensbi-1.6.tar.gz +sha256 fb1ae61a85e966322101acb1c982f84d9eaafc4de7dd474a7d7546d9bb321c6f opensbi-1.8.1.tar.gz diff --git a/board/visionfive2/patches/uboot/uboot.hash b/board/visionfive2/patches/uboot/uboot.hash index 80ea21b7cb4..ff6e4ed2e2f 100644 --- a/board/visionfive2/patches/uboot/uboot.hash +++ b/board/visionfive2/patches/uboot/uboot.hash @@ -1,2 +1,2 @@ # Locally calculated -sha256 439d3bef296effd54130be6a731c5b118be7fddd7fcc663ccbc5fb18294d8718 u-boot-2025.04.tar.bz2 +sha256 78e8bfc382fe388f9b55aa1daf8c563522a037779b5d4c349d1415e381f1243e u-boot-2026.07.tar.bz2 diff --git a/board/visionfive2/readme.txt b/board/visionfive2/readme.txt index cc4fece6e92..718494e33ee 100644 --- a/board/visionfive2/readme.txt +++ b/board/visionfive2/readme.txt @@ -1,8 +1,8 @@ -Starfive VisionFive2 +StarFive VisionFive2 ==================== The VisionFive2 is a low-cost RISC-V 64-bit based platform, powered by a -Starfive JH7110 processor. +StarFive JH7110 processor. https://doc-en.rvspace.org/Doc_Center/visionfive_2.html @@ -24,33 +24,36 @@ If you have a booting device use u-boot and tftp: # tftpboot 0x82000000 spi-nor.img # sf probe - # sf update 0x82000000 0x0 {filesize} + # sf update 0x82000000 0x0 ${filesize} -Otherwise, follow the recovery instruction: +Otherwise, follow the recovery instructions: https://doc-en.rvspace.org/VisionFive2/Quick_Start_Guide/VisionFive2_SDK_QSG/recovering_bootloader%20-%20vf2.html How to write the SD card ======================== -Copy the bootable "sdcard.img" onto an SD card with "dd": +Write "sdcard.img" onto an SD card with "dd": - $ sudo dd if=output/images/sdcard.img of=/dev/sdX + $ sudo dd if=output/images/sdcard.img of=/dev/sdX bs=1M conv=fsync Preparing the board =================== Connect a TTL UART cable to pin 6 (GND), 8 (TX) and 10 (RX). -Use the correct mode for booting: -- SD card RGPIO_0=1, GRPIO_1=0 -- SPI NOR flash RGPIO_0=1, GRPIO_1=1 - -Note that Buildroot puts the bootloader both in SPI NOR and on the SD card, -so after flashing as instructed above, either boot mode should work. +Select SPI NOR flash boot mode: +- RGPIO_0=0, RGPIO_1=0 https://doc-en.rvspace.org/VisionFive2/Quick_Start_Guide/VisionFive2_SDK_QSG/boot_mode_settings.html Insert your SD card. Power-up the board using an USB-C cable. + +Note that starting with U-Boot v2025.10, booting U-Boot directly from an +SD card is no longer supported on this board. In this configuration, the +bootloader is loaded from SPI NOR flash, while the SD card contains the +Linux kernel, device trees and root filesystem. + +https://docs.u-boot.org/en/v2026.07/board/starfive/visionfive2.html#zero-stage-program-loader diff --git a/board/xilinx/linux_6.12.10/patches/linux/0001-include-uapi-linux-xlnx-ai-engine.h-fix-CONFIG_XILIN.patch b/board/xilinx/linux_6.12.10/patches/linux/0001-include-uapi-linux-xlnx-ai-engine.h-fix-CONFIG_XILIN.patch deleted file mode 100644 index e9dfee9f97d..00000000000 --- a/board/xilinx/linux_6.12.10/patches/linux/0001-include-uapi-linux-xlnx-ai-engine.h-fix-CONFIG_XILIN.patch +++ /dev/null @@ -1,127 +0,0 @@ -From 333678d7b9edc29e8148411d48f70950b1b614c1 Mon Sep 17 00:00:00 2001 -From: Neal Frager -Date: Mon, 2 Jun 2025 11:07:03 +0100 -Subject: [PATCH] include/uapi/linux/xlnx-ai-engine.h: fix - CONFIG_XILINX_AIE leak - -Linux Kconfig options should not be exposed to user space. This patch fixes -a Linux kernel leak of the CONFIG_XILINX_AIE option by moving the changes -implemented by the CONFIG_XILINX_AIE from the uapi header file to the local -Linux kernel header file. - -Upstream: internal AMD jira process -Signed-off-by: Neal Frager ---- - include/linux/xlnx-ai-engine.h | 37 +++++++++++++++++++++++++ - include/uapi/linux/xlnx-ai-engine.h | 42 ----------------------------- - 2 files changed, 37 insertions(+), 42 deletions(-) - -diff --git a/include/linux/xlnx-ai-engine.h b/include/linux/xlnx-ai-engine.h -index 44a1e40ef9b8..10905dc84ae9 100644 ---- a/include/linux/xlnx-ai-engine.h -+++ b/include/linux/xlnx-ai-engine.h -@@ -171,6 +171,13 @@ static inline u32 aie_get_error_category(struct aie_error *err) - return err->category; - } - -+int aie_partition_write_privileged_mem(struct device *dev, size_t offset, size_t len, void *data); -+int aie_partition_read_privileged_mem(struct device *dev, size_t offset, size_t len, void *data); -+bool aie_partition_check_noc_aximm(struct device *dev, struct aie_location *loc); -+int aie_partition_check_uc_aximm(struct device *dev, struct aie_location *loc); -+int aie_partition_uc_zeroize_mem(struct device *dev, struct aie_location *loc, u32 regval); -+int aie_load_cert(struct device *dev, unsigned char *elf_addr); -+ - #else - static inline bool aie_partition_is_available(struct aie_partition_req *req) - { -@@ -271,5 +278,35 @@ static inline int aie_part_rscmgr_set_static_range(struct device *dev, - return -EINVAL; - } - -+int aie_partition_write_privileged_mem(struct device *dev, size_t offset, size_t len, void *data) -+{ -+ return -EINVAL; -+} -+ -+int aie_partition_read_privileged_mem(struct device *dev, size_t offset, size_t len, void *data) -+{ -+ return -EINVAL; -+} -+ -+bool aie_partition_check_noc_aximm(struct device *dev, struct aie_location *loc) -+{ -+ return false; -+} -+ -+int aie_partition_check_uc_aximm(struct device *dev, struct aie_location *loc) -+{ -+ return 0; -+} -+ -+int aie_partition_uc_zeroize_mem(struct device *dev, struct aie_location *loc, u32 regval) -+{ -+ return -EINVAL; -+} -+ -+int aie_load_cert(struct device *dev, unsigned char *elf_addr) -+{ -+ return -EINVAL; -+} -+ - #endif /* CONFIG_XILINX_AIE */ - #endif -diff --git a/include/uapi/linux/xlnx-ai-engine.h b/include/uapi/linux/xlnx-ai-engine.h -index 424c5f4c4097..1680aed8ad85 100644 ---- a/include/uapi/linux/xlnx-ai-engine.h -+++ b/include/uapi/linux/xlnx-ai-engine.h -@@ -781,47 +781,5 @@ struct aie_rsc_user_stat_array { - */ - #define AIE_UPDATE_SHIMDMA_DMABUF_BD_ADDR_IOCTL _IOW(AIE_IOCTL_BASE, 0x1e, \ - struct aie_dmabuf_bd_args) --#if IS_ENABLED(CONFIG_XILINX_AIE) -- --int aie_partition_write_privileged_mem(struct device *dev, size_t offset, size_t len, void *data); --int aie_partition_read_privileged_mem(struct device *dev, size_t offset, size_t len, void *data); --bool aie_partition_check_noc_aximm(struct device *dev, struct aie_location *loc); --int aie_partition_check_uc_aximm(struct device *dev, struct aie_location *loc); --int aie_partition_uc_zeroize_mem(struct device *dev, struct aie_location *loc, u32 regval); --int aie_load_cert(struct device *dev, unsigned char *elf_addr); -- --#else /* IS_ENABLED(CONFIG_XILINX_AIE) */ -- --int aie_partition_write_privileged_mem(struct device *dev, size_t offset, size_t len, void *data) --{ -- return -EINVAL; --} -- --int aie_partition_read_privileged_mem(struct device *dev, size_t offset, size_t len, void *data) --{ -- return -EINVAL; --} -- --bool aie_partition_check_noc_aximm(struct device *dev, struct aie_location *loc) --{ -- return false; --} -- --int aie_partition_check_uc_aximm(struct device *dev, struct aie_location *loc) --{ -- return 0; --} -- --int aie_partition_uc_zeroize_mem(struct device *dev, struct aie_location *loc, u32 regval) --{ -- return -EINVAL; --} -- --int aie_load_cert(struct device *dev, unsigned char *elf_addr) --{ -- return -EINVAL; --} -- --#endif /* IS_ENABLED(CONFIG_XILINX_AIE) */ - - #endif --- -2.25.1 - diff --git a/board/xilinx/linux_6.18.40/patches/linux-headers/linux-headers.hash b/board/xilinx/linux_6.18.40/patches/linux-headers/linux-headers.hash new file mode 120000 index 00000000000..5808d92afe8 --- /dev/null +++ b/board/xilinx/linux_6.18.40/patches/linux-headers/linux-headers.hash @@ -0,0 +1 @@ +../linux/linux.hash \ No newline at end of file diff --git a/board/xilinx/linux_6.18.40/patches/linux/linux.hash b/board/xilinx/linux_6.18.40/patches/linux/linux.hash new file mode 100644 index 00000000000..f0b89845733 --- /dev/null +++ b/board/xilinx/linux_6.18.40/patches/linux/linux.hash @@ -0,0 +1,7 @@ +# Locally calculated +sha256 bdb5c40d7b43f8a1ea6ee34e2392a389935120b11cf54c36ad3ccff937b1a179 xlnx_rebase_v6.18_LTS_2026.1_update_merge_v6.18.40.tar.gz + +# Locally calculated +sha256 fb5a425bd3b3cd6071a3a9aff9909a859e7c1158d54d32e07658398cd67eb6a0 COPYING +sha256 8780e78a1a737e127f25a65f6d95269bffd36158dc261114de7859b490bfc5aa LICENSES/preferred/GPL-2.0 +sha256 8e378ab93586eb55135d3bc119cce787f7324f48394777d00c34fa3d0be3303f LICENSES/exceptions/Linux-syscall-note diff --git a/board/xilinx/patches/arm-trusted-firmware/arm-trusted-firmware.hash b/board/xilinx/patches/arm-trusted-firmware/arm-trusted-firmware.hash deleted file mode 100644 index d7bd1e73ef0..00000000000 --- a/board/xilinx/patches/arm-trusted-firmware/arm-trusted-firmware.hash +++ /dev/null @@ -1,2 +0,0 @@ -# Locally calculated -sha256 4d16661f367adb8713113acb420a1ad5f611ce6a309e98005a8ea3273511f03d xlnx_rebase_v2.12_2025.1.tar.gz diff --git a/board/xilinx/patches/linux/linux.hash b/board/xilinx/patches/linux/linux.hash deleted file mode 100644 index 902169229c0..00000000000 --- a/board/xilinx/patches/linux/linux.hash +++ /dev/null @@ -1,2 +0,0 @@ -# Locally calculated -sha256 25795c354f30a3358506ab02deeac99e7f79850804c52d6c3d5539fd310f0491 xlnx_rebase_v6.12_LTS_2025.1.tar.gz diff --git a/board/xilinx/patches/uboot/uboot.hash b/board/xilinx/patches/uboot/uboot.hash deleted file mode 100644 index 19192b182cb..00000000000 --- a/board/xilinx/patches/uboot/uboot.hash +++ /dev/null @@ -1,2 +0,0 @@ -# Locally calculated -sha256 b86d6f07d16a83ed0bdbd9b9439e099afc87ba7dfb77246e2472183848e2ea93 xlnx_rebase_v2025.01_2025.1.tar.gz diff --git a/board/xilinx/xilinx_v2026.1/patches/arm-trusted-firmware/arm-trusted-firmware.hash b/board/xilinx/xilinx_v2026.1/patches/arm-trusted-firmware/arm-trusted-firmware.hash new file mode 100644 index 00000000000..d40bcad589c --- /dev/null +++ b/board/xilinx/xilinx_v2026.1/patches/arm-trusted-firmware/arm-trusted-firmware.hash @@ -0,0 +1,5 @@ +# Locally calculated +sha256 6047af5f352fa7aaacd988a3fe0d018627dcc200dfdf93de0c0dc8072adef828 xlnx-rebase-v2.14_2026.1.tar.gz + +# Locally calculated +sha256 dbc8c4c1042f833ac961730cda41f87b6845068d9b5be2c90726504cfc82382e docs/license.rst diff --git a/board/xilinx/xilinx_v2026.1/patches/optee-os/optee-os.hash b/board/xilinx/xilinx_v2026.1/patches/optee-os/optee-os.hash new file mode 100644 index 00000000000..8dde8c24ea7 --- /dev/null +++ b/board/xilinx/xilinx_v2026.1/patches/optee-os/optee-os.hash @@ -0,0 +1,2 @@ +# Locally calculated +sha256 0d33919008db24241580ac54c355d5c7efb18b089c2a7248704676a769790380 xlnx-rebase-v4.9.0_2026.1.tar.gz diff --git a/board/xilinx/xilinx_v2026.1/patches/uboot/uboot.hash b/board/xilinx/xilinx_v2026.1/patches/uboot/uboot.hash new file mode 100644 index 00000000000..52fcaf846f8 --- /dev/null +++ b/board/xilinx/xilinx_v2026.1/patches/uboot/uboot.hash @@ -0,0 +1,2 @@ +# Locally calculated +sha256 bc42689fffa878f9852120b167b871d8294697441cdd9f8347506a30d4024e8c xlnx-rebase-v2026.01_2026.1.tar.gz diff --git a/board/zynq/readme.txt b/board/zynq/readme.txt index 87df7236f03..225af4b9dcf 100644 --- a/board/zynq/readme.txt +++ b/board/zynq/readme.txt @@ -36,14 +36,16 @@ myboot=... References: - ZC702 information including schematics, reference designs, and manuals are available from - https://www.xilinx.com/products/boards-and-kits/ek-z7-zc702-g.html + https://www.amd.com/en/products/adaptive-socs-and-fpgas/evaluation-boards/ek-z7-zc702-g.html - ZC706 information including schematics, reference designs, and manuals are available from - http://www.xilinx.com/products/boards-and-kits/ek-z7-zc706-g.html. + https://www.amd.com/en/products/adaptive-socs-and-fpgas/evaluation-boards/ek-z7-zc706-g.html - Zedboard/Microzed information including schematics, reference designs, and - manuals are available from http://www.zedboard.org . + manuals are available from + https://www.avnet.com/americas/products/avnet-boards/avnet-board-families/zedboard/ + https://www.tria-technologies.com/product/microzed/ Support for other boards: @@ -71,17 +73,18 @@ you need to add them by yourself. 1) Start with a defconfig supported by Buildroot (e.g. Zedboard) make zynq_zed_defconfig -2) make uboot-menuconfig - Visit the following menu and enable CONFIG_XILINX_PS_INIT_FILE +2) make menuconfig + Visit the following menu to enable BR2_TARGET_UBOOT_ZYNQ - ARM architecture ---> - [*] Zynq/ZynqMP PS init file(s) location + Bootloaders ---> + U-Boot ---> + [*] Boot on the Xilinx Zynq SoCs -3) Copy ps7_init_gpl.c/h generated by the Xilinx Vivado tools into - output/build/uboot-custom/board/xilinx/zynq/custom_hw_platform/ +3) make menuconfig + In the same menu, configure BR2_TARGET_UBOOT_ZYNQ_PS7_INIT_FILE -4) make + Bootloaders ---> + U-Boot ---> + () Custom ps7_init_gpl file -Note: The files in step 3 will need to be re-copied after cleaning the -output directory and at this time, there is no way to save them as -part of the buildroot configuration, except as a U-Boot patch. +4) make diff --git a/board/zynqmp/genimage.cfg b/board/zynqmp/genimage.cfg index 0a6aea7a292..193aff2a2db 100644 --- a/board/zynqmp/genimage.cfg +++ b/board/zynqmp/genimage.cfg @@ -12,7 +12,7 @@ image boot.vfat { } } - size = 32M + size = 64M } image sdcard.img { diff --git a/board/zynqmp/kria/readme.txt b/board/zynqmp/kria/readme.txt index 6fd7ca61ca0..8d008332bf4 100644 --- a/board/zynqmp/kria/readme.txt +++ b/board/zynqmp/kria/readme.txt @@ -10,13 +10,13 @@ the KD240, KR260 and KV260 production boards. Evaluation board features can be found here with the links below. KD240: -https://www.xilinx.com/products/som/kria/kd240-drives-starter-kit.html +https://www.amd.com/en/products/system-on-modules/kria/k24/kd240-drives-starter-kit.html KR260: -https://www.xilinx.com/products/som/kria/kr260-robotics-starter-kit.html +https://www.amd.com/en/products/system-on-modules/kria/k26/kr260-robotics-starter-kit.html KV260: -https://www.xilinx.com/products/som/kria/kv260-vision-starter-kit.html +https://www.amd.com/en/products/system-on-modules/kria/k26/kv260-vision-starter-kit.html How to build it =============== diff --git a/board/zynqmp/post-image.sh b/board/zynqmp/post-image.sh index f44b66342d4..67b0be65b76 100755 --- a/board/zynqmp/post-image.sh +++ b/board/zynqmp/post-image.sh @@ -2,13 +2,9 @@ # By default U-Boot loads DTB from a file named "system.dtb", so # let's use a symlink with that name that points to the *first* -# devicetree listed in the config. - -FIRST_DT=$(sed -nr \ - -e 's|^BR2_LINUX_KERNEL_INTREE_DTS_NAME="(xilinx/)?([-_/[:alnum:]\\.]*).*"$|\2|p' \ - "${BR2_CONFIG}") - -[ -z "${FIRST_DT}" ] || ln -fs "${FIRST_DT}.dtb" "${BINARIES_DIR}/system.dtb" +# devicetree in the LINUX_DTBS list. +LINUX_DTBS="$(make --no-print-directory VARS=LINUX_DTBS printvars)" +ln -fs "$(basename "${LINUX_DTBS%% *}")" "${BINARIES_DIR}/system.dtb" BOARD_DIR="$(dirname "$0")" diff --git a/board/zynqmp/readme.txt b/board/zynqmp/readme.txt index 242c6434804..12b81f4a076 100644 --- a/board/zynqmp/readme.txt +++ b/board/zynqmp/readme.txt @@ -10,13 +10,13 @@ boards. Evaluation board features can be found here with the links below. ZCU102: -https://www.xilinx.com/products/boards-and-kits/zcu102.html +https://www.amd.com/en/products/adaptive-socs-and-fpgas/evaluation-boards/ek-u1-zcu102-g.html ZCU104: -https://www.xilinx.com/products/boards-and-kits/zcu104.html +https://www.amd.com/en/products/adaptive-socs-and-fpgas/evaluation-boards/zcu104.html ZCU106: -https://www.xilinx.com/products/boards-and-kits/zcu106.html +https://www.amd.com/en/products/adaptive-socs-and-fpgas/evaluation-boards/zcu106.html How to build it diff --git a/boot/Config.in b/boot/Config.in index f167346cdf6..d73d221431f 100644 --- a/boot/Config.in +++ b/boot/Config.in @@ -1,3 +1,11 @@ +config BR2_TARGET_XILINX_FIRMWARE_ARCH_SUPPORTS + bool + default y + # All Xilinx SoCs using this package are aarch64 only + depends on BR2_aarch64 + # only CPUs with corresponding firmwares: + depends on BR2_cortex_a53 || BR2_cortex_a72 || BR2_cortex_a78 + menu "Bootloaders" source "boot/afboot-stm32/Config.in" @@ -12,14 +20,17 @@ source "boot/mv-ddr-marvell/Config.in" source "boot/mxs-bootlets/Config.in" source "boot/optee-os/Config.in" source "boot/opensbi/Config.in" -source "boot/s500-bootloader/Config.in" +source "boot/palo/Config.in" source "boot/shim/Config.in" source "boot/syslinux/Config.in" source "boot/ti-k3-boot-firmware/Config.in" source "boot/ti-k3-r5-loader/Config.in" source "boot/uboot/Config.in" source "boot/vexpress-firmware/Config.in" + +if BR2_TARGET_XILINX_FIRMWARE_ARCH_SUPPORTS source "boot/xilinx-embeddedsw/Config.in" source "boot/xilinx-prebuilt/Config.in" +endif endmenu diff --git a/boot/arm-trusted-firmware/Config.in b/boot/arm-trusted-firmware/Config.in index 72684e5974c..70fdec5c2ae 100644 --- a/boot/arm-trusted-firmware/Config.in +++ b/boot/arm-trusted-firmware/Config.in @@ -80,6 +80,14 @@ config BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION endif +config BR2_TARGET_ARM_TRUSTED_FIRMWARE_LICENSE_FILES + string "ATF license files" if BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT || \ + BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL + default "docs/license.rst" + help + A space-separated list of license files related to the ATF + package. + config BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM string "ATF platform" help @@ -188,6 +196,19 @@ config BR2_TARGET_ARM_TRUSTED_FIRMWARE_EDK2_AS_BL33 for the 'qemu_sbsa' platform. In this case, due to the EDK2 build system, the dependency between ATF and EDK is reversed. +config BR2_TARGET_ARM_TRUSTED_FIRMWARE_LINUX_AS_BL33 + bool "Linux kernel" + depends on BR2_LINUX_KERNEL + depends on (BR2_arm || BR2_armeb) + depends on (BR2_LINUX_KERNEL_ZIMAGE || BR2_LINUX_KERNEL_APPENDED_ZIMAGE) + help + This option allows to embed the Linux kernel as the BL33 + part of the ARM Trusted Firmware. + + Do not choose this option if you intend to use U-Boot or + another second-stage bootloader. With this option, TF-A + starts Linux directly. + endchoice if BR2_TARGET_ARM_TRUSTED_FIRMWARE_BAREBOX_AS_BL33 diff --git a/boot/arm-trusted-firmware/arm-trusted-firmware.mk b/boot/arm-trusted-firmware/arm-trusted-firmware.mk index dca16d39604..798efd5a15a 100644 --- a/boot/arm-trusted-firmware/arm-trusted-firmware.mk +++ b/boot/arm-trusted-firmware/arm-trusted-firmware.mk @@ -5,6 +5,10 @@ ################################################################################ ARM_TRUSTED_FIRMWARE_VERSION = $(call qstrip,$(BR2_TARGET_ARM_TRUSTED_FIRMWARE_VERSION)) +ARM_TRUSTED_FIRMWARE_CPE_ID_PREFIX = cpe:2.3:o +ARM_TRUSTED_FIRMWARE_CPE_ID_VENDOR = trustedfirmware +ARM_TRUSTED_FIRMWARE_CPE_ID_PRODUCT = trusted_firmware-a +ARM_TRUSTED_FIRMWARE_CPE_ID_VERSION = $(patsubst v%,%,$(patsubst lts-%,%,$(ARM_TRUSTED_FIRMWARE_VERSION))) ifeq ($(BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL),y) # Handle custom ATF tarballs as specified by the configuration @@ -18,14 +22,11 @@ else # Handle stable official ATF versions ARM_TRUSTED_FIRMWARE_SITE = https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git ARM_TRUSTED_FIRMWARE_SITE_METHOD = git -# The licensing of custom or from-git versions is unknown. -# This is valid only for the latest (i.e. known) version. -ifeq ($(BR2_TARGET_ARM_TRUSTED_FIRMWARE_LATEST_VERSION)$(BR2_TARGET_ARM_TRUSTED_FIRMWARE_LATEST_LTS_2_10_VERSION)$(BR2_TARGET_ARM_TRUSTED_FIRMWARE_LATEST_LTS_2_8_VERSION)$(BR2_TARGET_ARM_TRUSTED_FIRMWARE_LATEST_LTS_2_12_VERSION),y) -ARM_TRUSTED_FIRMWARE_LICENSE = BSD-3-Clause -ARM_TRUSTED_FIRMWARE_LICENSE_FILES = docs/license.rst -endif endif +ARM_TRUSTED_FIRMWARE_LICENSE = BSD-3-Clause +ARM_TRUSTED_FIRMWARE_LICENSE_FILES = $(call qstrip,$(BR2_TARGET_ARM_TRUSTED_FIRMWARE_LICENSE_FILES)) + ifeq ($(BR2_TARGET_ARM_TRUSTED_FIRMWARE):$(BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION)$(BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL)$(BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT),y:y) BR_NO_CHECK_HASH_FOR += $(ARM_TRUSTED_FIRMWARE_SOURCE) endif @@ -132,6 +133,14 @@ ARM_TRUSTED_FIRMWARE_MAKE_OPTS += BL33=$(BINARIES_DIR)/$(ARM_TRUSTED_FIRMWARE_UB ARM_TRUSTED_FIRMWARE_DEPENDENCIES += uboot endif +ifeq ($(BR2_TARGET_ARM_TRUSTED_FIRMWARE_LINUX_AS_BL33),y) +ARM_TRUSTED_FIRMWARE_MAKE_OPTS += BL33=$(BINARIES_DIR)/zImage +ifeq ($(ARM_TRUSTED_FIRMWARE_PLATFORM),stm32mp1) +ARM_TRUSTED_FIRMWARE_MAKE_OPTS += BL33_CFG=$(BINARIES_DIR)/$(LINUX_DTBS) +endif +ARM_TRUSTED_FIRMWARE_DEPENDENCIES += linux +endif + ifeq ($(BR2_TARGET_VEXPRESS_FIRMWARE),y) ARM_TRUSTED_FIRMWARE_MAKE_OPTS += SCP_BL2=$(BINARIES_DIR)/scp-fw.bin ARM_TRUSTED_FIRMWARE_DEPENDENCIES += vexpress-firmware @@ -162,6 +171,8 @@ endif ifeq ($(BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31),y) ARM_TRUSTED_FIRMWARE_MAKE_TARGETS += bl31 +# Avoid BL31 environment variable from polluting the build +ARM_TRUSTED_FIRMWARE_MAKE_OPTS += BL31= endif ifeq ($(BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31_UBOOT),y) diff --git a/boot/at91bootstrap3/Config.in b/boot/at91bootstrap3/Config.in index 35bdb28162b..83d3a02121f 100644 --- a/boot/at91bootstrap3/Config.in +++ b/boot/at91bootstrap3/Config.in @@ -66,6 +66,16 @@ config BR2_TARGET_AT91BOOTSTRAP3_VERSION if BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT || BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_SVN default "custom" if BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL +config BR2_TARGET_AT91BOOTSTRAP3_LICENSE_FILES + string "AT91Bootstrap3 license files" if BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT || \ + BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_SVN || \ + BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL + default "" if BR2_TARGET_AT91BOOTSTRAP3_LATEST_VERSION_3X + default "LICENSES/MIT.txt" + help + A space-separated list of license files related to the + AT91Bootstrap3 package. + config BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_PATCH_DIR string "custom patch dir" help diff --git a/boot/at91bootstrap3/at91bootstrap3.mk b/boot/at91bootstrap3/at91bootstrap3.mk index 4bbe7cc7181..2ed34f3de4d 100644 --- a/boot/at91bootstrap3/at91bootstrap3.mk +++ b/boot/at91bootstrap3/at91bootstrap3.mk @@ -25,11 +25,12 @@ endif ifeq ($(BR2_TARGET_AT91BOOTSTRAP3_LATEST_VERSION),y) AT91BOOTSTRAP3_LICENSE = MIT -AT91BOOTSTRAP3_LICENSE_FILES = LICENSES/MIT.txt else ifeq ($(BR2_TARGET_AT91BOOTSTRAP3_LATEST_VERSION_3X),y) AT91BOOTSTRAP3_LICENSE = Atmel License endif +AT91BOOTSTRAP3_LICENSE_FILES = $(call qstrip,$(BR2_TARGET_AT91BOOTSTRAP3_LICENSE_FILES)) + AT91BOOTSTRAP3_CPE_ID_VENDOR = linux4sam AT91BOOTSTRAP3_CPE_ID_PRODUCT = at91bootstrap diff --git a/boot/barebox/Config.in b/boot/barebox/Config.in index c3cb0b33325..6ee97ffe02a 100644 --- a/boot/barebox/Config.in +++ b/boot/barebox/Config.in @@ -45,6 +45,14 @@ config BR2_TARGET_BAREBOX_VERSION default "custom" if BR2_TARGET_BAREBOX_CUSTOM_TARBALL default BR2_TARGET_BAREBOX_CUSTOM_GIT_VERSION if BR2_TARGET_BAREBOX_CUSTOM_GIT +config BR2_TARGET_BAREBOX_LICENSE_FILES + string "Barebox license files" if BR2_TARGET_BAREBOX_CUSTOM_TARBALL || \ + BR2_TARGET_BAREBOX_CUSTOM_GIT + default "COPYING" + help + A space-separated list of license files related to the Barebox + package. + config BR2_TARGET_BAREBOX_CUSTOM_PATCH_DIR string "custom patch dir" help diff --git a/boot/barebox/barebox.mk b/boot/barebox/barebox.mk index 929ed48ada8..cbd6f9313c8 100644 --- a/boot/barebox/barebox.mk +++ b/boot/barebox/barebox.mk @@ -39,9 +39,7 @@ $(1)_DL_SUBDIR = barebox $(1)_DEPENDENCIES = host-lzop $(1)_LICENSE = GPL-2.0 with exceptions -ifeq ($(BR2_TARGET_BAREBOX_LATEST_VERSION),y) -$(1)_LICENSE_FILES = COPYING -endif +$(1)_LICENSE_FILES = $$(call qstrip,$$(BR2_TARGET_BAREBOX_LICENSE_FILES)) ifeq ($(BR2_TARGET_BAREBOX_NEEDS_OPENSSL),y) BAREBOX_DEPENDENCIES += host-openssl host-pkgconf diff --git a/boot/boot-wrapper-aarch64/Config.in b/boot/boot-wrapper-aarch64/Config.in index dfefb7a9fd1..7271336166d 100644 --- a/boot/boot-wrapper-aarch64/Config.in +++ b/boot/boot-wrapper-aarch64/Config.in @@ -11,7 +11,7 @@ menuconfig BR2_TARGET_BOOT_WRAPPER_AARCH64 possible to start an Aarch64 kernel inside the available software simulators for the Aarch64 architecture. - git://git.kernel.org/pub/scm/linux/kernel/git/mark/boot-wrapper-aarch64.git + https://git.kernel.org/pub/scm/linux/kernel/git/mark/boot-wrapper-aarch64.git if BR2_TARGET_BOOT_WRAPPER_AARCH64 diff --git a/boot/boot-wrapper-aarch64/boot-wrapper-aarch64.hash b/boot/boot-wrapper-aarch64/boot-wrapper-aarch64.hash new file mode 100644 index 00000000000..d818161002b --- /dev/null +++ b/boot/boot-wrapper-aarch64/boot-wrapper-aarch64.hash @@ -0,0 +1,5 @@ +# Locally computed: +sha256 c9fcac5e28e1501bcffb3b36d56487cbefcf7cb708e00f48fe6360ef82fb3847 boot-wrapper-aarch64-b621b157b42f1fe398520cf499db88aa654c78e2-git4.tar.gz + +# Hash for license files: +sha256 bdaa479b497358151fc1166dc75a613e68321320b945e92ea07a4b6dc9a63271 LICENSE.txt diff --git a/boot/boot-wrapper-aarch64/boot-wrapper-aarch64.mk b/boot/boot-wrapper-aarch64/boot-wrapper-aarch64.mk index 0f41d0d67f8..75be23f2433 100644 --- a/boot/boot-wrapper-aarch64/boot-wrapper-aarch64.mk +++ b/boot/boot-wrapper-aarch64/boot-wrapper-aarch64.mk @@ -4,7 +4,7 @@ # ################################################################################ -BOOT_WRAPPER_AARCH64_VERSION = ac6742520ded1da30d500f74e8affe86e27cabd5 +BOOT_WRAPPER_AARCH64_VERSION = b621b157b42f1fe398520cf499db88aa654c78e2 BOOT_WRAPPER_AARCH64_SITE = https://git.kernel.org/pub/scm/linux/kernel/git/mark/boot-wrapper-aarch64.git BOOT_WRAPPER_AARCH64_SITE_METHOD = git BOOT_WRAPPER_AARCH64_LICENSE = BSD-3-Clause diff --git a/boot/edk2/Config.in b/boot/edk2/Config.in index 850b9a39de0..2f4737fab9f 100644 --- a/boot/edk2/Config.in +++ b/boot/edk2/Config.in @@ -14,6 +14,8 @@ config BR2_TARGET_EDK2 help EDK II is a modern, feature-rich, cross-platform firmware development environment for the UEFI and PI specifications. + Select this to build EDK II (and OVMF) to be able to boot + Buildroot in QEMU (UEFI mode). https://github.com/tianocore/tianocore.github.io/wiki/EDK-II @@ -21,20 +23,12 @@ if BR2_TARGET_EDK2 choice prompt "Platform" - default BR2_TARGET_EDK2_PLATFORM_OVMF_I386 if BR2_i386 default BR2_TARGET_EDK2_PLATFORM_OVMF_LOONGARCH64 if \ BR2_loongarch64 default BR2_TARGET_EDK2_PLATFORM_OVMF_RISCV if BR2_RISCV_64 default BR2_TARGET_EDK2_PLATFORM_OVMF_X64 if BR2_x86_64 default BR2_TARGET_EDK2_PLATFORM_ARM_VIRT_QEMU if BR2_aarch64 -config BR2_TARGET_EDK2_PLATFORM_OVMF_I386 - bool "i386" - depends on BR2_i386 || BR2_x86_64 - help - Platform configuration for a generic i386 target. - This platform will boot from flash address 0x0. - config BR2_TARGET_EDK2_PLATFORM_OVMF_LOONGARCH64 bool "LoongArch64" depends on BR2_loongarch64 @@ -77,13 +71,6 @@ config BR2_TARGET_EDK2_PLATFORM_ARM_VIRT_QEMU_KERNEL the Linux boot protocol. It can therefore be loaded by a previous bootloader like ARM Trusted Firmware or OP-TEE. -config BR2_TARGET_EDK2_PLATFORM_ARM_SGI575 - bool "ARM SGI-575" - depends on BR2_aarch64 - help - Platform configuration for ARM SGI-575 on ARM's - Fixed Virtual Platform (FVP). - config BR2_TARGET_EDK2_PLATFORM_ARM_VEXPRESS_FVP_AARCH64 bool "ARM VExpress FVP Aarch64" depends on BR2_aarch64 @@ -118,8 +105,7 @@ endchoice config BR2_TARGET_EDK2_OVMF_DEBUG_ON_SERIAL bool "OVMF Debug on Serial" depends on BR2_ENABLE_DEBUG - depends on BR2_TARGET_EDK2_PLATFORM_OVMF_I386 || \ - BR2_TARGET_EDK2_PLATFORM_OVMF_X64 + depends on BR2_TARGET_EDK2_PLATFORM_OVMF_X64 help When EDK2 OVMF is built with debug, messages are printed to IO port 0x402. Those messages are not shown in the normal @@ -130,14 +116,27 @@ config BR2_TARGET_EDK2_OVMF_DEBUG_ON_SERIAL See OVMF README: https://github.com/tianocore/edk2/blob/master/OvmfPkg/README +config BR2_TARGET_EDK2_EXTRA_BUILD_OPTS + string "Extra build options" + help + EDK2 build may include extra options. Those are usually in + the form of "-D SOMEFLAG_ENABLE" and might be specific for a + processor architecture or a platform. For example: "-D + NETWORK_HTTP_BOOT_ENABLE", "-D NETWORK_TLS_ENABLE", ... + + Those options are generally documented in their respective + packages. See for example: + https://github.com/tianocore/edk2/blob/master/OvmfPkg/README + + This configuration is an arbitrary string that will be + passed to the build command. + config BR2_TARGET_EDK2_FD_NAME string - default "OVMF" if BR2_TARGET_EDK2_PLATFORM_OVMF_I386 default "OVMF" if BR2_TARGET_EDK2_PLATFORM_OVMF_X64 default "QEMU_EFI" if BR2_TARGET_EDK2_PLATFORM_ARM_VIRT_QEMU default "QEMU_EFI" if BR2_TARGET_EDK2_PLATFORM_ARM_VIRT_QEMU_KERNEL default "QEMU_EFI" if BR2_TARGET_EDK2_PLATFORM_OVMF_LOONGARCH64 - default "BL33_AP_UEFI" if BR2_TARGET_EDK2_PLATFORM_ARM_SGI575 default "FVP_AARCH64_EFI" if BR2_TARGET_EDK2_PLATFORM_ARM_VEXPRESS_FVP_AARCH64 default "ARMADA_EFI" if BR2_TARGET_EDK2_PLATFORM_SOLIDRUN_ARMADA80X0MCBIN diff --git a/boot/edk2/edk2.hash b/boot/edk2/edk2.hash index 68fae47afcb..6bbad3164cc 100644 --- a/boot/edk2/edk2.hash +++ b/boot/edk2/edk2.hash @@ -1,3 +1,3 @@ # Locally calculated -sha256 e05130e107d476cdec0846f55f22e00fb2cc0030b60fafce464a6cf10134d18d edk2-edk2-stable202505-git4.tar.gz +sha256 f0f0ee66d147c408194f406f65d62cc6be490a9403909cd7b6e7082fbc2bbc84 edk2-edk2-stable202608-git4.tar.gz sha256 50ce20c9cfdb0e19ee34fe0a51fc0afe961f743697b068359ab2f862b494df80 License.txt diff --git a/boot/edk2/edk2.mk b/boot/edk2/edk2.mk index 3612c86fb1e..81a9dfddd37 100644 --- a/boot/edk2/edk2.mk +++ b/boot/edk2/edk2.mk @@ -4,7 +4,7 @@ # ################################################################################ -EDK2_VERSION = edk2-stable202505 +EDK2_VERSION = edk2-stable202608 EDK2_SITE = https://github.com/tianocore/edk2 EDK2_SITE_METHOD = git EDK2_LICENSE = BSD-2-Clause-Patent @@ -56,14 +56,7 @@ EDK2_GIT_SUBMODULES = YES EDK2_BUILD_PACKAGES = $(@D)/Build/Buildroot EDK2_PACKAGES_PATHS = $(@D) $(EDK2_BUILD_PACKAGES) $(STAGING_DIR)/usr/share/edk2-platforms -ifeq ($(BR2_TARGET_EDK2_PLATFORM_OVMF_I386),y) -EDK2_ARCH = IA32 -EDK2_DEPENDENCIES += host-nasm -EDK2_PACKAGE_NAME = OvmfPkg -EDK2_PLATFORM_NAME = OvmfPkgIa32 -EDK2_BUILD_DIR = OvmfIa32 - -else ifeq ($(BR2_TARGET_EDK2_PLATFORM_OVMF_X64),y) +ifeq ($(BR2_TARGET_EDK2_PLATFORM_OVMF_X64),y) EDK2_ARCH = X64 EDK2_DEPENDENCIES += host-nasm EDK2_PACKAGE_NAME = OvmfPkg @@ -74,19 +67,13 @@ else ifeq ($(BR2_TARGET_EDK2_PLATFORM_ARM_VIRT_QEMU),y) EDK2_ARCH = AARCH64 EDK2_PACKAGE_NAME = ArmVirtPkg EDK2_PLATFORM_NAME = ArmVirtQemu -EDK2_BUILD_DIR = $(EDK2_PLATFORM_NAME)-$(EDK2_ARCH) +EDK2_BUILD_DIR = $(EDK2_PLATFORM_NAME)-AArch64 else ifeq ($(BR2_TARGET_EDK2_PLATFORM_ARM_VIRT_QEMU_KERNEL),y) EDK2_ARCH = AARCH64 EDK2_PACKAGE_NAME = ArmVirtPkg EDK2_PLATFORM_NAME = ArmVirtQemuKernel -EDK2_BUILD_DIR = $(EDK2_PLATFORM_NAME)-$(EDK2_ARCH) - -else ifeq ($(BR2_TARGET_EDK2_PLATFORM_ARM_SGI575),y) -EDK2_ARCH = AARCH64 -EDK2_PACKAGE_NAME = Platform/ARM/SgiPkg/Sgi575 -EDK2_PLATFORM_NAME = Sgi575 -EDK2_BUILD_DIR = $(EDK2_PLATFORM_NAME) +EDK2_BUILD_DIR = $(EDK2_PLATFORM_NAME)-AArch64 else ifeq ($(BR2_TARGET_EDK2_PLATFORM_ARM_VEXPRESS_FVP_AARCH64),y) EDK2_ARCH = AARCH64 @@ -149,14 +136,15 @@ EDK2_BUILD_ENV += \ PYTHON_COMMAND=$(HOST_DIR)/bin/python3 \ IASL_PREFIX=$(HOST_DIR)/bin/ \ NASM_PREFIX=$(HOST_DIR)/bin/ \ - GCC5_$(EDK2_ARCH)_PREFIX=$(TARGET_CROSS) + GCC_$(EDK2_ARCH)_PREFIX=$(TARGET_CROSS) EDK2_BUILD_OPTS += \ - -t GCC5 \ + -t GCC \ -n $(BR2_JLEVEL) \ -a $(EDK2_ARCH) \ -b $(EDK2_BUILD_TYPE) \ - -p $(EDK2_PACKAGE_NAME)/$(EDK2_PLATFORM_NAME).dsc + -p $(EDK2_PACKAGE_NAME)/$(EDK2_PLATFORM_NAME).dsc \ + $(call qstrip,$(BR2_TARGET_EDK2_EXTRA_BUILD_OPTS)) define EDK2_BUILD_CMDS mkdir -p $(EDK2_BUILD_PACKAGES) @@ -168,7 +156,7 @@ define EDK2_BUILD_CMDS endef define EDK2_INSTALL_IMAGES_CMDS - cp -f $(@D)/Build/$(EDK2_BUILD_DIR)/$(EDK2_BUILD_TYPE)_GCC5/FV/*.fd $(BINARIES_DIR) + cp -f $(@D)/Build/$(EDK2_BUILD_DIR)/$(EDK2_BUILD_TYPE)_GCC/FV/*.fd $(BINARIES_DIR) endef $(eval $(generic-package)) diff --git a/boot/grub2/0001-Add-missing-grub-core-extra_deps.lst-file-in-release.patch b/boot/grub2/0001-Add-missing-grub-core-extra_deps.lst-file-in-release.patch deleted file mode 100644 index 2a7c206b2db..00000000000 --- a/boot/grub2/0001-Add-missing-grub-core-extra_deps.lst-file-in-release.patch +++ /dev/null @@ -1,37 +0,0 @@ -From 4d4dae6a52b1749642261a15f5dcc1e3d4150b36 Mon Sep 17 00:00:00 2001 -From: Julien Olivain -Date: Fri, 22 Dec 2023 19:02:53 +0100 -Subject: [PATCH] Add missing grub-core/extra_deps.lst file in release tarball - -A file is missing in the grub-2.12 release tarballs (both .gz and .xz). -See [1]. The issue was reported in [2] and fixed upstream in [3]. - -This patch adds the missing file, on top of the release tarball. This -patch won't apply on upstream git, since the file is present in the -source repository. Since the issue is fixed upstream in [3], it is -expected upcoming releases tarballs will include the file. - -The file content was fetched from the upstream git repo: -https://git.savannah.gnu.org/gitweb/?p=grub.git;a=blob_plain;f=grub-core/extra_deps.lst;hb=refs/tags/grub-2.12 - -[1] https://ftp.gnu.org/gnu/grub/grub-2.12.tar.xz -[2] https://lists.gnu.org/archive/html/grub-devel/2023-12/msg00054.html -[3] https://git.savannah.gnu.org/gitweb/?p=grub.git;a=commit;h=b835601c7639ed1890f2d3db91900a8506011a8e - -Signed-off-by: Julien Olivain -Upstream: Fixed by: https://git.savannah.gnu.org/gitweb/?p=grub.git;a=commit;h=b835601c7639ed1890f2d3db91900a8506011a8e ---- - grub-core/extra_deps.lst | 1 + - 1 file changed, 1 insertion(+) - create mode 100644 grub-core/extra_deps.lst - -diff --git a/grub-core/extra_deps.lst b/grub-core/extra_deps.lst -new file mode 100644 -index 0000000..f44ad6a ---- /dev/null -+++ b/grub-core/extra_deps.lst -@@ -0,0 +1 @@ -+depends bli part_gpt --- -2.43.0 - diff --git a/boot/grub2/0001-Revert-arm64-Limit-memory-allocations-to-4GB-boundar.patch b/boot/grub2/0001-Revert-arm64-Limit-memory-allocations-to-4GB-boundar.patch new file mode 100644 index 00000000000..ec83b2fa795 --- /dev/null +++ b/boot/grub2/0001-Revert-arm64-Limit-memory-allocations-to-4GB-boundar.patch @@ -0,0 +1,34 @@ +From ec277f1056227689c8875d1c73602b47bfe72633 Mon Sep 17 00:00:00 2001 +From: Neal Gompa +Date: Mon, 28 Sep 2026 18:12:45 -0400 +Subject: [PATCH] Revert "arm64: Limit memory allocations to 4GB boundary" + +This causes failed memory allocations on some ARM-based platforms, +notably Apple Silicon Macs. + +This reverts commit 1cae861314f43540cde773fab8b6ed769dc5f106. + +Reviewed-by: Leo Sandoval +Signed-off-by: Neal Gompa +Part-of: +Upstream: https://gitlab.freedesktop.org/gnu-grub/grub/-/commit/711110daccaf15df695b270d13f76b5bc84a64dd +Signed-off-by: Julien Olivain +--- + include/grub/arm64/efi/memory.h | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/include/grub/arm64/efi/memory.h b/include/grub/arm64/efi/memory.h +index 2c64918e3..c6cb32417 100644 +--- a/include/grub/arm64/efi/memory.h ++++ b/include/grub/arm64/efi/memory.h +@@ -1,6 +1,6 @@ + #ifndef GRUB_MEMORY_CPU_HEADER + #include + +-#define GRUB_EFI_MAX_USABLE_ADDRESS 0xffffffff ++#define GRUB_EFI_MAX_USABLE_ADDRESS 0xffffffffffffULL + + #endif /* ! GRUB_MEMORY_CPU_HEADER */ +-- +2.56.0 + diff --git a/boot/grub2/0002-misc-Implement-grub_strlcpy.patch b/boot/grub2/0002-misc-Implement-grub_strlcpy.patch deleted file mode 100644 index f512df44400..00000000000 --- a/boot/grub2/0002-misc-Implement-grub_strlcpy.patch +++ /dev/null @@ -1,70 +0,0 @@ -From 67241595d3dae392589ee74b65cd40ea090d1837 Mon Sep 17 00:00:00 2001 -From: B Horn -Date: Sat, 15 Jun 2024 02:33:08 +0100 -Subject: [PATCH] misc: Implement grub_strlcpy() - -grub_strlcpy() acts the same way as strlcpy() does on most *NIX, -returning the length of src and ensuring dest is always NUL -terminated except when size is 0. - -Signed-off-by: B Horn -Reviewed-by: Daniel Kiper -Upstream: ea703528a8581a2ea7e0bad424a70fdf0aec7d8f -Signed-off-by: Thomas Petazzoni ---- - include/grub/misc.h | 39 +++++++++++++++++++++++++++++++++++++++ - 1 file changed, 39 insertions(+) - -diff --git a/include/grub/misc.h b/include/grub/misc.h -index 1b35a167f..103175480 100644 ---- a/include/grub/misc.h -+++ b/include/grub/misc.h -@@ -64,6 +64,45 @@ grub_stpcpy (char *dest, const char *src) - return d - 1; - } - -+static inline grub_size_t -+grub_strlcpy (char *dest, const char *src, grub_size_t size) -+{ -+ char *d = dest; -+ grub_size_t res = 0; -+ /* -+ * We do not subtract one from size here to avoid dealing with underflowing -+ * the value, which is why to_copy is always checked to be greater than one -+ * throughout this function. -+ */ -+ grub_size_t to_copy = size; -+ -+ /* Copy size - 1 bytes to dest. */ -+ if (to_copy > 1) -+ while ((*d++ = *src++) != '\0' && ++res && --to_copy > 1) -+ ; -+ -+ /* -+ * NUL terminate if size != 0. The previous step may have copied a NUL byte -+ * if it reached the end of the string, but we know dest[size - 1] must always -+ * be a NUL byte. -+ */ -+ if (size != 0) -+ dest[size - 1] = '\0'; -+ -+ /* If there is still space in dest, but are here, we reached the end of src. */ -+ if (to_copy > 1) -+ return res; -+ -+ /* -+ * If we haven't reached the end of the string, iterate through to determine -+ * the strings total length. -+ */ -+ while (*src++ != '\0' && ++res) -+ ; -+ -+ return res; -+} -+ - /* XXX: If grub_memmove is too slow, we must implement grub_memcpy. */ - static inline void * - grub_memcpy (void *dest, const void *src, grub_size_t n) --- -2.50.1 - diff --git a/boot/grub2/0003-fs-ufs-Fix-a-heap-OOB-write.patch b/boot/grub2/0003-fs-ufs-Fix-a-heap-OOB-write.patch deleted file mode 100644 index 0d822cba249..00000000000 --- a/boot/grub2/0003-fs-ufs-Fix-a-heap-OOB-write.patch +++ /dev/null @@ -1,36 +0,0 @@ -From ab0f52dadcda56782b3e82be0b15fa6eb0e9cee1 Mon Sep 17 00:00:00 2001 -From: B Horn -Date: Sun, 12 May 2024 02:03:33 +0100 -Subject: [PATCH] fs/ufs: Fix a heap OOB write - -grub_strcpy() was used to copy a symlink name from the filesystem -image to a heap allocated buffer. This led to a OOB write to adjacent -heap allocations. Fix by using grub_strlcpy(). - -Fixes: CVE-2024-45781 - -Reported-by: B Horn -Signed-off-by: B Horn -Reviewed-by: Daniel Kiper -Upstream: c1a291b01f4f1dcd6a22b61f1c81a45a966d16ba -Signed-off-by: Thomas Petazzoni ---- - grub-core/fs/ufs.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/grub-core/fs/ufs.c b/grub-core/fs/ufs.c -index a354c92d9..01235101b 100644 ---- a/grub-core/fs/ufs.c -+++ b/grub-core/fs/ufs.c -@@ -463,7 +463,7 @@ grub_ufs_lookup_symlink (struct grub_ufs_data *data, int ino) - /* Check against zero is paylindromic, no need to swap. */ - if (data->inode.nblocks == 0 - && INODE_SIZE (data) <= sizeof (data->inode.symlink)) -- grub_strcpy (symlink, (char *) data->inode.symlink); -+ grub_strlcpy (symlink, (char *) data->inode.symlink, sz); - else - { - if (grub_ufs_read_file (data, 0, 0, 0, sz, symlink) < 0) --- -2.50.1 - diff --git a/boot/grub2/0004-fs-hfs-Fix-stack-OOB-write-with-grub_strcpy.patch b/boot/grub2/0004-fs-hfs-Fix-stack-OOB-write-with-grub_strcpy.patch deleted file mode 100644 index 40df727a609..00000000000 --- a/boot/grub2/0004-fs-hfs-Fix-stack-OOB-write-with-grub_strcpy.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 157e6e2a3da139dc2e08cf41b49115965cdaa1d3 Mon Sep 17 00:00:00 2001 -From: B Horn -Date: Sun, 12 May 2024 02:48:33 +0100 -Subject: [PATCH] fs/hfs: Fix stack OOB write with grub_strcpy() - -Replaced with grub_strlcpy(). - -Fixes: CVE-2024-45782 -Fixes: CVE-2024-56737 -Fixes: https://savannah.gnu.org/bugs/?66599 - -Reported-by: B Horn -Signed-off-by: B Horn -Reviewed-by: Daniel Kiper -Upstream: 417547c10410b714e43f08f74137c24015f8f4c3 -Signed-off-by: Thomas Petazzoni ---- - grub-core/fs/hfs.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/grub-core/fs/hfs.c b/grub-core/fs/hfs.c -index 91dc0e69c..920112b03 100644 ---- a/grub-core/fs/hfs.c -+++ b/grub-core/fs/hfs.c -@@ -379,7 +379,7 @@ grub_hfs_mount (grub_disk_t disk) - volume name. */ - key.parent_dir = grub_cpu_to_be32_compile_time (1); - key.strlen = data->sblock.volname[0]; -- grub_strcpy ((char *) key.str, (char *) (data->sblock.volname + 1)); -+ grub_strlcpy ((char *) key.str, (char *) (data->sblock.volname + 1), sizeof (key.str)); - - if (grub_hfs_find_node (data, (char *) &key, data->cat_root, - 0, (char *) &dir, sizeof (dir)) == 0) --- -2.50.1 - diff --git a/boot/grub2/0005-fs-tar-Initialize-name-in-grub_cpio_find_file.patch b/boot/grub2/0005-fs-tar-Initialize-name-in-grub_cpio_find_file.patch deleted file mode 100644 index 444c02c44f1..00000000000 --- a/boot/grub2/0005-fs-tar-Initialize-name-in-grub_cpio_find_file.patch +++ /dev/null @@ -1,45 +0,0 @@ -From 2233c409ada20d1ab4a6a00a50cdde35e5a36589 Mon Sep 17 00:00:00 2001 -From: B Horn -Date: Sun, 12 May 2024 02:47:54 +0100 -Subject: [PATCH] fs/tar: Initialize name in grub_cpio_find_file() - -It was possible to iterate through grub_cpio_find_file() without -allocating name and not setting mode to GRUB_ARCHELP_ATTR_END, which -would cause the uninitialized value for name to be used as an argument -for canonicalize() in grub_archelp_dir(). - -Reported-by: B Horn -Signed-off-by: B Horn -Reviewed-by: Daniel Kiper -Upstream: 2c8ac08c99466c0697f704242363fc687f492a0d -Signed-off-by: Thomas Petazzoni ---- - grub-core/fs/tar.c | 5 +++++ - 1 file changed, 5 insertions(+) - -diff --git a/grub-core/fs/tar.c b/grub-core/fs/tar.c -index c551ed6b5..646bce5eb 100644 ---- a/grub-core/fs/tar.c -+++ b/grub-core/fs/tar.c -@@ -78,6 +78,7 @@ grub_cpio_find_file (struct grub_archelp_data *data, char **name, - int reread = 0, have_longname = 0, have_longlink = 0; - - data->hofs = data->next_hofs; -+ *name = NULL; - - for (reread = 0; reread < 3; reread++) - { -@@ -202,6 +203,10 @@ grub_cpio_find_file (struct grub_archelp_data *data, char **name, - } - return GRUB_ERR_NONE; - } -+ -+ if (*name == NULL) -+ return grub_error (GRUB_ERR_BAD_FS, "invalid tar archive"); -+ - return GRUB_ERR_NONE; - } - --- -2.50.1 - diff --git a/boot/grub2/0006-fs-tar-Integer-overflow-leads-to-heap-OOB-write.patch b/boot/grub2/0006-fs-tar-Integer-overflow-leads-to-heap-OOB-write.patch deleted file mode 100644 index c3c845a50af..00000000000 --- a/boot/grub2/0006-fs-tar-Integer-overflow-leads-to-heap-OOB-write.patch +++ /dev/null @@ -1,94 +0,0 @@ -From 472e180b6aac8cb4f25affa687e68f9be4e3df79 Mon Sep 17 00:00:00 2001 -From: Lidong Chen -Date: Fri, 22 Nov 2024 06:27:58 +0000 -Subject: [PATCH] fs/tar: Integer overflow leads to heap OOB write - -Both namesize and linksize are derived from hd.size, a 12-digit octal -number parsed by read_number(). Later direct arithmetic calculation like -"namesize + 1" and "linksize + 1" may exceed the maximum value of -grub_size_t leading to heap OOB write. This patch fixes the issue by -using grub_add() and checking for an overflow. - -Fixes: CVE-2024-45780 - -Reported-by: Nils Langius -Signed-off-by: Lidong Chen -Reviewed-by: Daniel Kiper -Reviewed-by: Alec Brown -Upstream: 0087bc6902182fe5cedce2d034c75a79cf6dd4f3 -Signed-off-by: Thomas Petazzoni ---- - grub-core/fs/tar.c | 23 ++++++++++++++++++----- - 1 file changed, 18 insertions(+), 5 deletions(-) - -diff --git a/grub-core/fs/tar.c b/grub-core/fs/tar.c -index 646bce5eb..386c09022 100644 ---- a/grub-core/fs/tar.c -+++ b/grub-core/fs/tar.c -@@ -25,6 +25,7 @@ - #include - #include - #include -+#include - - GRUB_MOD_LICENSE ("GPLv3+"); - -@@ -76,6 +77,7 @@ grub_cpio_find_file (struct grub_archelp_data *data, char **name, - { - struct head hd; - int reread = 0, have_longname = 0, have_longlink = 0; -+ grub_size_t sz; - - data->hofs = data->next_hofs; - *name = NULL; -@@ -98,7 +100,11 @@ grub_cpio_find_file (struct grub_archelp_data *data, char **name, - { - grub_err_t err; - grub_size_t namesize = read_number (hd.size, sizeof (hd.size)); -- *name = grub_malloc (namesize + 1); -+ -+ if (grub_add (namesize, 1, &sz)) -+ return grub_error (GRUB_ERR_BAD_FS, N_("name size overflow")); -+ -+ *name = grub_malloc (sz); - if (*name == NULL) - return grub_errno; - err = grub_disk_read (data->disk, 0, -@@ -118,15 +124,19 @@ grub_cpio_find_file (struct grub_archelp_data *data, char **name, - { - grub_err_t err; - grub_size_t linksize = read_number (hd.size, sizeof (hd.size)); -- if (data->linkname_alloc < linksize + 1) -+ -+ if (grub_add (linksize, 1, &sz)) -+ return grub_error (GRUB_ERR_BAD_FS, N_("link size overflow")); -+ -+ if (data->linkname_alloc < sz) - { - char *n; -- n = grub_calloc (2, linksize + 1); -+ n = grub_calloc (2, sz); - if (!n) - return grub_errno; - grub_free (data->linkname); - data->linkname = n; -- data->linkname_alloc = 2 * (linksize + 1); -+ data->linkname_alloc = 2 * (sz); - } - - err = grub_disk_read (data->disk, 0, -@@ -149,7 +159,10 @@ grub_cpio_find_file (struct grub_archelp_data *data, char **name, - while (extra_size < sizeof (hd.prefix) - && hd.prefix[extra_size]) - extra_size++; -- *name = grub_malloc (sizeof (hd.name) + extra_size + 2); -+ -+ if (grub_add (sizeof (hd.name) + 2, extra_size, &sz)) -+ return grub_error (GRUB_ERR_BAD_FS, N_("long name size overflow")); -+ *name = grub_malloc (sz); - if (*name == NULL) - return grub_errno; - if (hd.prefix[0]) --- -2.50.1 - diff --git a/boot/grub2/0007-fs-f2fs-Set-a-grub_errno-if-mount-fails.patch b/boot/grub2/0007-fs-f2fs-Set-a-grub_errno-if-mount-fails.patch deleted file mode 100644 index 320240b2663..00000000000 --- a/boot/grub2/0007-fs-f2fs-Set-a-grub_errno-if-mount-fails.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 95f391673c0a08c2410454536614ef543cac6629 Mon Sep 17 00:00:00 2001 -From: B Horn -Date: Sun, 12 May 2024 06:15:03 +0100 -Subject: [PATCH] fs/f2fs: Set a grub_errno if mount fails - -It was previously possible for grub_errno to not be set when -grub_f2fs_mount() failed if nat_bitmap_ptr() returned NULL. - -This issue is solved by ensuring a grub_errno is set in the fail case. - -Reported-by: B Horn -Signed-off-by: B Horn -Reviewed-by: Daniel Kiper -Upstream: 563436258cde64da6b974880abff1bf0959f4da3 -Signed-off-by: Thomas Petazzoni ---- - grub-core/fs/f2fs.c | 3 +++ - 1 file changed, 3 insertions(+) - -diff --git a/grub-core/fs/f2fs.c b/grub-core/fs/f2fs.c -index 855e24618..db8a65f8d 100644 ---- a/grub-core/fs/f2fs.c -+++ b/grub-core/fs/f2fs.c -@@ -872,6 +872,9 @@ grub_f2fs_mount (grub_disk_t disk) - return data; - - fail: -+ if (grub_errno == GRUB_ERR_NONE) -+ grub_error (GRUB_ERR_BAD_FS, "not a F2FS filesystem"); -+ - grub_free (data); - - return NULL; --- -2.50.1 - diff --git a/boot/grub2/0008-fs-hfsplus-Set-a-grub_errno-if-mount-fails.patch b/boot/grub2/0008-fs-hfsplus-Set-a-grub_errno-if-mount-fails.patch deleted file mode 100644 index 3493ab8af30..00000000000 --- a/boot/grub2/0008-fs-hfsplus-Set-a-grub_errno-if-mount-fails.patch +++ /dev/null @@ -1,40 +0,0 @@ -From 947e9e98d35edd7b359498b5f31338dc228f5081 Mon Sep 17 00:00:00 2001 -From: B Horn -Date: Sun, 12 May 2024 06:22:51 +0100 -Subject: [PATCH] fs/hfsplus: Set a grub_errno if mount fails - -It was possible for mount to fail but not set grub_errno. This led to -a possible double decrement of the module reference count if the NULL -page was mapped. - -Fixing in general as a similar bug was fixed in commit 61b13c187 -(fs/hfsplus: Set grub_errno to prevent NULL pointer access) and there -are likely more variants around. - -Fixes: CVE-2024-45783 - -Reported-by: B Horn -Signed-off-by: B Horn -Reviewed-by: Daniel Kiper -Upstream: f7c070a2e28dfab7137db0739fb8db1dc02d8898 -Signed-off-by: Thomas Petazzoni ---- - grub-core/fs/hfsplus.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/grub-core/fs/hfsplus.c b/grub-core/fs/hfsplus.c -index 295822f69..de71fd486 100644 ---- a/grub-core/fs/hfsplus.c -+++ b/grub-core/fs/hfsplus.c -@@ -405,7 +405,7 @@ grub_hfsplus_mount (grub_disk_t disk) - - fail: - -- if (grub_errno == GRUB_ERR_OUT_OF_RANGE) -+ if (grub_errno == GRUB_ERR_OUT_OF_RANGE || grub_errno == GRUB_ERR_NONE) - grub_error (GRUB_ERR_BAD_FS, "not a HFS+ filesystem"); - - grub_free (data); --- -2.50.1 - diff --git a/boot/grub2/0009-fs-iso9660-Set-a-grub_errno-if-mount-fails.patch b/boot/grub2/0009-fs-iso9660-Set-a-grub_errno-if-mount-fails.patch deleted file mode 100644 index d9c38b62ba9..00000000000 --- a/boot/grub2/0009-fs-iso9660-Set-a-grub_errno-if-mount-fails.patch +++ /dev/null @@ -1,38 +0,0 @@ -From a0e37c98e6f330110e4009f8e5ba73ca0c2eaff5 Mon Sep 17 00:00:00 2001 -From: B Horn -Date: Sun, 12 May 2024 06:37:08 +0100 -Subject: [PATCH] fs/iso9660: Set a grub_errno if mount fails - -It was possible for a grub_errno to not be set if mount of an ISO 9660 -filesystem failed when set_rockridge() returned 0. - -This isn't known to be exploitable as the other filesystems due to -filesystem helper checking the requested file type. Though fixing -as a precaution. - -Reported-by: B Horn -Signed-off-by: B Horn -Reviewed-by: Daniel Kiper -Upstream: 965db5970811d18069b34f28f5f31ddadde90a97 -Signed-off-by: Thomas Petazzoni ---- - grub-core/fs/iso9660.c | 3 +++ - 1 file changed, 3 insertions(+) - -diff --git a/grub-core/fs/iso9660.c b/grub-core/fs/iso9660.c -index 8c348b59a..8d480e602 100644 ---- a/grub-core/fs/iso9660.c -+++ b/grub-core/fs/iso9660.c -@@ -551,6 +551,9 @@ grub_iso9660_mount (grub_disk_t disk) - return data; - - fail: -+ if (grub_errno == GRUB_ERR_NONE) -+ grub_error (GRUB_ERR_BAD_FS, "not a ISO9660 filesystem"); -+ - grub_free (data); - return 0; - } --- -2.50.1 - diff --git a/boot/grub2/0010-fs-iso9660-Fix-invalid-free.patch b/boot/grub2/0010-fs-iso9660-Fix-invalid-free.patch deleted file mode 100644 index 6bd1665234f..00000000000 --- a/boot/grub2/0010-fs-iso9660-Fix-invalid-free.patch +++ /dev/null @@ -1,55 +0,0 @@ -From 3acd964eafdd32e8ab7d7c04b18171052a859d3a Mon Sep 17 00:00:00 2001 -From: Michael Chang -Date: Fri, 31 May 2024 15:14:42 +0800 -Subject: [PATCH] fs/iso9660: Fix invalid free - -The ctx->filename can point to either a string literal or a dynamically -allocated string. The ctx->filename_alloc field is used to indicate the -type of allocation. - -An issue has been identified where ctx->filename is reassigned to -a string literal in susp_iterate_dir() but ctx->filename_alloc is not -correctly handled. This oversight causes a memory leak and an invalid -free operation later. - -The fix involves checking ctx->filename_alloc, freeing the allocated -string if necessary and clearing ctx->filename_alloc for string literals. - -Reported-by: Daniel Axtens -Signed-off-by: Michael Chang -Reviewed-by: Daniel Kiper -Upstream: 1443833a9535a5873f7de3798cf4d8389f366611 -Signed-off-by: Thomas Petazzoni ---- - grub-core/fs/iso9660.c | 14 ++++++++++++-- - 1 file changed, 12 insertions(+), 2 deletions(-) - -diff --git a/grub-core/fs/iso9660.c b/grub-core/fs/iso9660.c -index 8d480e602..8e3c95c4f 100644 ---- a/grub-core/fs/iso9660.c -+++ b/grub-core/fs/iso9660.c -@@ -628,9 +628,19 @@ susp_iterate_dir (struct grub_iso9660_susp_entry *entry, - filename type is stored. */ - /* FIXME: Fix this slightly improper cast. */ - if (entry->data[0] & GRUB_ISO9660_RR_DOT) -- ctx->filename = (char *) "."; -+ { -+ if (ctx->filename_alloc) -+ grub_free (ctx->filename); -+ ctx->filename_alloc = 0; -+ ctx->filename = (char *) "."; -+ } - else if (entry->data[0] & GRUB_ISO9660_RR_DOTDOT) -- ctx->filename = (char *) ".."; -+ { -+ if (ctx->filename_alloc) -+ grub_free (ctx->filename); -+ ctx->filename_alloc = 0; -+ ctx->filename = (char *) ".."; -+ } - else if (entry->len >= 5) - { - grub_size_t off = 0, csize = 1; --- -2.50.1 - diff --git a/boot/grub2/0011-fs-jfs-Fix-OOB-read-in-jfs_getent.patch b/boot/grub2/0011-fs-jfs-Fix-OOB-read-in-jfs_getent.patch deleted file mode 100644 index 96e34b0e9f2..00000000000 --- a/boot/grub2/0011-fs-jfs-Fix-OOB-read-in-jfs_getent.patch +++ /dev/null @@ -1,68 +0,0 @@ -From b01accc4d132a252f02bf57c31f5fff8ce98a339 Mon Sep 17 00:00:00 2001 -From: Lidong Chen -Date: Fri, 22 Nov 2024 06:27:59 +0000 -Subject: [PATCH] fs/jfs: Fix OOB read in jfs_getent() - -The JFS fuzzing revealed an OOB read in grub_jfs_getent(). The crash -was caused by an invalid leaf nodes count, diro->dirpage->header.count, -which was larger than the maximum number of leaf nodes allowed in an -inode. This fix is to ensure that the leaf nodes count is validated in -grub_jfs_opendir() before calling grub_jfs_getent(). - -On the occasion replace existing raw numbers with newly defined constant. - -Signed-off-by: Lidong Chen -Reviewed-by: Daniel Kiper -Reviewed-by: Alec Brown -Upstream: 66175696f3a385b14bdf1ebcda7755834bd2d5fb -Signed-off-by: Thomas Petazzoni ---- - grub-core/fs/jfs.c | 17 +++++++++++++++-- - 1 file changed, 15 insertions(+), 2 deletions(-) - -diff --git a/grub-core/fs/jfs.c b/grub-core/fs/jfs.c -index 6f7c43904..32dec7fb7 100644 ---- a/grub-core/fs/jfs.c -+++ b/grub-core/fs/jfs.c -@@ -41,6 +41,12 @@ GRUB_MOD_LICENSE ("GPLv3+"); - - #define GRUB_JFS_TREE_LEAF 2 - -+/* -+ * Define max entries stored in-line in an inode. -+ * https://jfs.sourceforge.net/project/pub/jfslayout.pdf -+ */ -+#define GRUB_JFS_INODE_INLINE_ENTRIES 8 -+ - struct grub_jfs_sblock - { - /* The magic for JFS. It should contain the string "JFS1". */ -@@ -203,9 +209,9 @@ struct grub_jfs_inode - grub_uint8_t freecnt; - grub_uint8_t freelist; - grub_uint32_t idotdot; -- grub_uint8_t sorted[8]; -+ grub_uint8_t sorted[GRUB_JFS_INODE_INLINE_ENTRIES]; - } header; -- struct grub_jfs_leaf_dirent dirents[8]; -+ struct grub_jfs_leaf_dirent dirents[GRUB_JFS_INODE_INLINE_ENTRIES]; - } GRUB_PACKED dir; - /* Fast symlink. */ - struct -@@ -453,6 +459,13 @@ grub_jfs_opendir (struct grub_jfs_data *data, struct grub_jfs_inode *inode) - /* Check if the entire tree is contained within the inode. */ - if (inode->file.tree.flags & GRUB_JFS_TREE_LEAF) - { -+ if (inode->dir.header.count > GRUB_JFS_INODE_INLINE_ENTRIES) -+ { -+ grub_free (diro); -+ grub_error (GRUB_ERR_BAD_FS, N_("invalid JFS inode")); -+ return 0; -+ } -+ - diro->leaf = inode->dir.dirents; - diro->next_leaf = (struct grub_jfs_leaf_next_dirent *) de; - diro->sorted = inode->dir.header.sorted; --- -2.50.1 - diff --git a/boot/grub2/0012-fs-jfs-Fix-OOB-read-caused-by-invalid-dir-slot-index.patch b/boot/grub2/0012-fs-jfs-Fix-OOB-read-caused-by-invalid-dir-slot-index.patch deleted file mode 100644 index 6257a4b887e..00000000000 --- a/boot/grub2/0012-fs-jfs-Fix-OOB-read-caused-by-invalid-dir-slot-index.patch +++ /dev/null @@ -1,69 +0,0 @@ -From b35b73b9d779e88fb4e6f53fb10a5bfebf3475aa Mon Sep 17 00:00:00 2001 -From: Lidong Chen -Date: Fri, 22 Nov 2024 06:28:00 +0000 -Subject: [PATCH] fs/jfs: Fix OOB read caused by invalid dir slot index - -While fuzz testing JFS with ASAN enabled an OOB read was detected in -grub_jfs_opendir(). The issue occurred due to an invalid directory slot -index in the first entry of the sorted directory slot array in the inode -directory header. The fix ensures the slot index is validated before -accessing it. Given that an internal or a leaf node in a directory B+ -tree is a 4 KiB in size and each directory slot is always 32 bytes, the -max number of slots in a node is 128. The validation ensures that the -slot index doesn't exceed this limit. - -[1] https://jfs.sourceforge.net/project/pub/jfslayout.pdf - - JFS will allocate 4K of disk space for an internal node of the B+ tree. - An internal node looks the same as a leaf node. - - page 10 - - Fixed number of Directory Slots depending on the size of the node. These are - the slots to be used for storing the directory slot array and the directory - entries or router entries. A directory slot is always 32 bytes. - ... - A Directory Slot Array which is a sorted array of indices to the directory - slots that are currently in use. - ... - An internal or a leaf node in the directory B+ tree is a 4K page. - - page 25 - -Signed-off-by: Lidong Chen -Reviewed-by: Daniel Kiper -Reviewed-by: Alec Brown -Upstream: ab09fd0531f3523ac0ef833404526c98c08248f7 -Signed-off-by: Thomas Petazzoni ---- - grub-core/fs/jfs.c | 9 +++++++++ - 1 file changed, 9 insertions(+) - -diff --git a/grub-core/fs/jfs.c b/grub-core/fs/jfs.c -index 32dec7fb7..88fb884df 100644 ---- a/grub-core/fs/jfs.c -+++ b/grub-core/fs/jfs.c -@@ -46,6 +46,7 @@ GRUB_MOD_LICENSE ("GPLv3+"); - * https://jfs.sourceforge.net/project/pub/jfslayout.pdf - */ - #define GRUB_JFS_INODE_INLINE_ENTRIES 8 -+#define GRUB_JFS_DIR_MAX_SLOTS 128 - - struct grub_jfs_sblock - { -@@ -481,6 +482,14 @@ grub_jfs_opendir (struct grub_jfs_data *data, struct grub_jfs_inode *inode) - return 0; - } - -+ if (inode->dir.header.sorted[0] >= GRUB_JFS_DIR_MAX_SLOTS) -+ { -+ grub_error (GRUB_ERR_BAD_FS, N_("invalid directory slot index")); -+ grub_free (diro->dirpage); -+ grub_free (diro); -+ return 0; -+ } -+ - blk = grub_le_to_cpu32 (de[inode->dir.header.sorted[0]].ex.blk2); - blk <<= (grub_le_to_cpu16 (data->sblock.log2_blksz) - GRUB_DISK_SECTOR_BITS); - --- -2.50.1 - diff --git a/boot/grub2/0013-fs-jfs-Use-full-40-bits-offset-and-address-for-a-dat.patch b/boot/grub2/0013-fs-jfs-Use-full-40-bits-offset-and-address-for-a-dat.patch deleted file mode 100644 index cd5d69cf74b..00000000000 --- a/boot/grub2/0013-fs-jfs-Use-full-40-bits-offset-and-address-for-a-dat.patch +++ /dev/null @@ -1,133 +0,0 @@ -From 978c4c79935a375cb16d94e8114d96fee013c288 Mon Sep 17 00:00:00 2001 -From: Lidong Chen -Date: Mon, 16 Dec 2024 20:22:39 +0000 -Subject: [PATCH] fs/jfs: Use full 40 bits offset and address for a data extent - -An extent's logical offset and address are represented as a 40-bit value -split into two parts: the most significant 8 bits and the least -significant 32 bits. Currently the JFS code uses only the least -significant 32 bits value for offsets and addresses assuming the data -size will never exceed the 32-bit range. This approach ignores the most -significant 8 bits potentially leading to incorrect offsets and -addresses for larger values. The patch fixes it by incorporating the -most significant 8 bits into the calculation to get the full 40-bits -value for offsets and addresses. - -https://jfs.sourceforge.net/project/pub/jfslayout.pdf - - "off1,off2 is a 40-bit field, containing the logical offset of the first - block in the extent. - ... - addr1,addr2 is a 40-bit field, containing the address of the extent." - -Signed-off-by: Lidong Chen -Reviewed-by: Alec Brown -Reviewed-by: Ross Philipson -Reviewed-by: Daniel Kiper -Upstream: bd999310fe67f35a66de3bfa2836da91589d04ef -Signed-off-by: Thomas Petazzoni ---- - grub-core/fs/jfs.c | 41 +++++++++++++++++++++++++++++------------ - 1 file changed, 29 insertions(+), 12 deletions(-) - -diff --git a/grub-core/fs/jfs.c b/grub-core/fs/jfs.c -index 88fb884df..2bde48d45 100644 ---- a/grub-core/fs/jfs.c -+++ b/grub-core/fs/jfs.c -@@ -265,6 +265,20 @@ static grub_dl_t my_mod; - - static grub_err_t grub_jfs_lookup_symlink (struct grub_jfs_data *data, grub_uint32_t ino); - -+/* -+ * An extent's offset, physical and logical, is represented as a 40-bit value. -+ * This 40-bit value is split into two parts: -+ * - offset1: the most signficant 8 bits of the offset, -+ * - offset2: the least significant 32 bits of the offset. -+ * -+ * This function calculates and returns the 64-bit offset of an extent. -+ */ -+static grub_uint64_t -+get_ext_offset (grub_uint8_t offset1, grub_uint32_t offset2) -+{ -+ return (((grub_uint64_t) offset1 << 32) | grub_le_to_cpu32 (offset2)); -+} -+ - static grub_int64_t - getblk (struct grub_jfs_treehead *treehead, - struct grub_jfs_tree_extent *extents, -@@ -274,22 +288,25 @@ getblk (struct grub_jfs_treehead *treehead, - { - int found = -1; - int i; -+ grub_uint64_t ext_offset, ext_blk; - - for (i = 0; i < grub_le_to_cpu16 (treehead->count) - 2 && - i < max_extents; i++) - { -+ ext_offset = get_ext_offset (extents[i].offset1, extents[i].offset2); -+ ext_blk = get_ext_offset (extents[i].extent.blk1, extents[i].extent.blk2); -+ - if (treehead->flags & GRUB_JFS_TREE_LEAF) - { - /* Read the leafnode. */ -- if (grub_le_to_cpu32 (extents[i].offset2) <= blk -+ if (ext_offset <= blk - && ((grub_le_to_cpu16 (extents[i].extent.length)) - + (extents[i].extent.length2 << 16) -- + grub_le_to_cpu32 (extents[i].offset2)) > blk) -- return (blk - grub_le_to_cpu32 (extents[i].offset2) -- + grub_le_to_cpu32 (extents[i].extent.blk2)); -+ + ext_offset) > blk) -+ return (blk - ext_offset + ext_blk); - } - else -- if (blk >= grub_le_to_cpu32 (extents[i].offset2)) -+ if (blk >= ext_offset) - found = i; - } - -@@ -307,10 +324,9 @@ getblk (struct grub_jfs_treehead *treehead, - return -1; - - if (!grub_disk_read (data->disk, -- ((grub_disk_addr_t) grub_le_to_cpu32 (extents[found].extent.blk2)) -- << (grub_le_to_cpu16 (data->sblock.log2_blksz) -- - GRUB_DISK_SECTOR_BITS), 0, -- sizeof (*tree), (char *) tree)) -+ (grub_disk_addr_t) ext_blk -+ << (grub_le_to_cpu16 (data->sblock.log2_blksz) - GRUB_DISK_SECTOR_BITS), -+ 0, sizeof (*tree), (char *) tree)) - { - if (grub_memcmp (&tree->treehead, treehead, sizeof (struct grub_jfs_treehead)) || - grub_memcmp (&tree->extents, extents, 254 * sizeof (struct grub_jfs_tree_extent))) -@@ -361,7 +377,7 @@ grub_jfs_read_inode (struct grub_jfs_data *data, grub_uint32_t ino, - sizeof (iag_inodes), &iag_inodes)) - return grub_errno; - -- inoblk = grub_le_to_cpu32 (iag_inodes[inoext].blk2); -+ inoblk = get_ext_offset (iag_inodes[inoext].blk1, iag_inodes[inoext].blk2); - inoblk <<= (grub_le_to_cpu16 (data->sblock.log2_blksz) - - GRUB_DISK_SECTOR_BITS); - inoblk += inonum; -@@ -490,7 +506,8 @@ grub_jfs_opendir (struct grub_jfs_data *data, struct grub_jfs_inode *inode) - return 0; - } - -- blk = grub_le_to_cpu32 (de[inode->dir.header.sorted[0]].ex.blk2); -+ blk = get_ext_offset (de[inode->dir.header.sorted[0]].ex.blk1, -+ de[inode->dir.header.sorted[0]].ex.blk2); - blk <<= (grub_le_to_cpu16 (data->sblock.log2_blksz) - GRUB_DISK_SECTOR_BITS); - - /* Read in the nodes until we are on the leaf node level. */ -@@ -508,7 +525,7 @@ grub_jfs_opendir (struct grub_jfs_data *data, struct grub_jfs_inode *inode) - - de = (struct grub_jfs_internal_dirent *) diro->dirpage->dirent; - index = diro->dirpage->sorted[diro->dirpage->header.sindex * 32]; -- blk = (grub_le_to_cpu32 (de[index].ex.blk2) -+ blk = (get_ext_offset (de[index].ex.blk1, de[index].ex.blk2) - << (grub_le_to_cpu16 (data->sblock.log2_blksz) - - GRUB_DISK_SECTOR_BITS)); - } while (!(diro->dirpage->header.flags & GRUB_JFS_TREE_LEAF)); --- -2.50.1 - diff --git a/boot/grub2/0014-fs-jfs-Inconsistent-signed-unsigned-types-usage-in-r.patch b/boot/grub2/0014-fs-jfs-Inconsistent-signed-unsigned-types-usage-in-r.patch deleted file mode 100644 index f08e797b37a..00000000000 --- a/boot/grub2/0014-fs-jfs-Inconsistent-signed-unsigned-types-usage-in-r.patch +++ /dev/null @@ -1,90 +0,0 @@ -From 32f319d100c3b8f9b04e6a175f599c7411a54555 Mon Sep 17 00:00:00 2001 -From: Lidong Chen -Date: Mon, 16 Dec 2024 20:22:40 +0000 -Subject: [PATCH] fs/jfs: Inconsistent signed/unsigned types usage in return - values - -The getblk() returns a value of type grub_int64_t which is assigned to -iagblk and inoblk, both of type grub_uint64_t, in grub_jfs_read_inode() -via grub_jfs_blkno(). This patch fixes the type mismatch in the -functions. Additionally, the getblk() will return 0 instead of -1 on -failure cases. This change is safe because grub_errno is always set in -getblk() to indicate errors and it is later checked in the callers. - -Signed-off-by: Lidong Chen -Reviewed-by: Alec Brown -Reviewed-by: Ross Philipson -Reviewed-by: Daniel Kiper -Upstream: edd995a26ec98654d907a9436a296c2d82bc4b28 -Signed-off-by: Thomas Petazzoni ---- - grub-core/fs/jfs.c | 15 +++++++++------ - 1 file changed, 9 insertions(+), 6 deletions(-) - -diff --git a/grub-core/fs/jfs.c b/grub-core/fs/jfs.c -index 2bde48d45..70a2f4947 100644 ---- a/grub-core/fs/jfs.c -+++ b/grub-core/fs/jfs.c -@@ -279,7 +279,7 @@ get_ext_offset (grub_uint8_t offset1, grub_uint32_t offset2) - return (((grub_uint64_t) offset1 << 32) | grub_le_to_cpu32 (offset2)); - } - --static grub_int64_t -+static grub_uint64_t - getblk (struct grub_jfs_treehead *treehead, - struct grub_jfs_tree_extent *extents, - int max_extents, -@@ -290,6 +290,8 @@ getblk (struct grub_jfs_treehead *treehead, - int i; - grub_uint64_t ext_offset, ext_blk; - -+ grub_errno = GRUB_ERR_NONE; -+ - for (i = 0; i < grub_le_to_cpu16 (treehead->count) - 2 && - i < max_extents; i++) - { -@@ -312,7 +314,7 @@ getblk (struct grub_jfs_treehead *treehead, - - if (found != -1) - { -- grub_int64_t ret = -1; -+ grub_uint64_t ret = 0; - struct - { - struct grub_jfs_treehead treehead; -@@ -321,7 +323,7 @@ getblk (struct grub_jfs_treehead *treehead, - - tree = grub_zalloc (sizeof (*tree)); - if (!tree) -- return -1; -+ return 0; - - if (!grub_disk_read (data->disk, - (grub_disk_addr_t) ext_blk -@@ -334,19 +336,20 @@ getblk (struct grub_jfs_treehead *treehead, - else - { - grub_error (GRUB_ERR_BAD_FS, "jfs: infinite recursion detected"); -- ret = -1; -+ ret = 0; - } - } - grub_free (tree); - return ret; - } - -- return -1; -+ grub_error (GRUB_ERR_READ_ERROR, "jfs: block %" PRIuGRUB_UINT64_T " not found", blk); -+ return 0; - } - - /* Get the block number for the block BLK in the node INODE in the - mounted filesystem DATA. */ --static grub_int64_t -+static grub_uint64_t - grub_jfs_blkno (struct grub_jfs_data *data, struct grub_jfs_inode *inode, - grub_uint64_t blk) - { --- -2.50.1 - diff --git a/boot/grub2/0015-fs-ext2-Fix-out-of-bounds-read-for-inline-extents.patch b/boot/grub2/0015-fs-ext2-Fix-out-of-bounds-read-for-inline-extents.patch deleted file mode 100644 index c04fb8eae03..00000000000 --- a/boot/grub2/0015-fs-ext2-Fix-out-of-bounds-read-for-inline-extents.patch +++ /dev/null @@ -1,51 +0,0 @@ -From 7da8e2e23db5f1ddb9c4dc992c69349149163c4c Mon Sep 17 00:00:00 2001 -From: Michael Chang -Date: Fri, 31 May 2024 15:14:23 +0800 -Subject: [PATCH] fs/ext2: Fix out-of-bounds read for inline extents - -When inline extents are used, i.e. the extent tree depth equals zero, -a maximum of four entries can fit into the inode's data block. If the -extent header states a number of entries greater than four the current -ext2 implementation causes an out-of-bounds read. Fix this issue by -capping the number of extents to four when reading inline extents. - -Reported-by: Daniel Axtens -Signed-off-by: Michael Chang -Reviewed-by: Daniel Kiper -Upstream: 7e2f750f0a795c4d64ec7dc7591edac8da2e978c -Signed-off-by: Thomas Petazzoni ---- - grub-core/fs/ext2.c | 10 +++++++++- - 1 file changed, 9 insertions(+), 1 deletion(-) - -diff --git a/grub-core/fs/ext2.c b/grub-core/fs/ext2.c -index e1cc5e62a..3f9f6b208 100644 ---- a/grub-core/fs/ext2.c -+++ b/grub-core/fs/ext2.c -@@ -495,6 +495,8 @@ grub_ext2_read_block (grub_fshelp_node_t node, grub_disk_addr_t fileblock) - struct grub_ext4_extent *ext; - int i; - grub_disk_addr_t ret; -+ grub_uint16_t nent; -+ const grub_uint16_t max_inline_ext = sizeof (inode->blocks) / sizeof (*ext) - 1; /* Minus 1 extent header. */ - - if (grub_ext4_find_leaf (data, (struct grub_ext4_extent_header *) inode->blocks.dir_blocks, - fileblock, &leaf) != GRUB_ERR_NONE) -@@ -508,7 +510,13 @@ grub_ext2_read_block (grub_fshelp_node_t node, grub_disk_addr_t fileblock) - return 0; - - ext = (struct grub_ext4_extent *) (leaf + 1); -- for (i = 0; i < grub_le_to_cpu16 (leaf->entries); i++) -+ -+ nent = grub_le_to_cpu16 (leaf->entries); -+ -+ if (leaf->depth == 0) -+ nent = grub_min (nent, max_inline_ext); -+ -+ for (i = 0; i < nent; i++) - { - if (fileblock < grub_le_to_cpu32 (ext[i].block)) - break; --- -2.50.1 - diff --git a/boot/grub2/0016-fs-xfs-Fix-out-of-bounds-read.patch b/boot/grub2/0016-fs-xfs-Fix-out-of-bounds-read.patch deleted file mode 100644 index c42627b7cd4..00000000000 --- a/boot/grub2/0016-fs-xfs-Fix-out-of-bounds-read.patch +++ /dev/null @@ -1,48 +0,0 @@ -From 854503d76e7dbc25f999d6be3e2ef4e8067f4152 Mon Sep 17 00:00:00 2001 -From: Michael Chang -Date: Fri, 31 May 2024 15:14:57 +0800 -Subject: [PATCH] fs/xfs: Fix out-of-bounds read - -The number of records in the root key array read from disk was not being -validated against the size of the root node. This could lead to an -out-of-bounds read. - -This patch adds a check to ensure that the number of records in the root -key array does not exceed the expected size of a root node read from -disk. If this check detects an out-of-bounds condition the operation is -aborted to prevent random errors due to metadata corruption. - -Reported-by: Daniel Axtens -Signed-off-by: Michael Chang -Reviewed-by: Daniel Kiper -Upstream: 6ccc77b59d16578b10eaf8a4fe85c20b229f0d8a -Signed-off-by: Thomas Petazzoni ---- - grub-core/fs/xfs.c | 11 +++++++++++ - 1 file changed, 11 insertions(+) - -diff --git a/grub-core/fs/xfs.c b/grub-core/fs/xfs.c -index bc2224dbb..d2d533531 100644 ---- a/grub-core/fs/xfs.c -+++ b/grub-core/fs/xfs.c -@@ -595,6 +595,17 @@ grub_xfs_read_block (grub_fshelp_node_t node, grub_disk_addr_t fileblock) - do - { - grub_uint64_t i; -+ grub_addr_t keys_end, data_end; -+ -+ if (grub_mul (sizeof (grub_uint64_t), nrec, &keys_end) || -+ grub_add ((grub_addr_t) keys, keys_end, &keys_end) || -+ grub_add ((grub_addr_t) node->data, node->data->data_size, &data_end) || -+ keys_end > data_end) -+ { -+ grub_error (GRUB_ERR_BAD_FS, "invalid number of XFS root keys"); -+ grub_free (leaf); -+ return 0; -+ } - - for (i = 0; i < nrec; i++) - { --- -2.50.1 - diff --git a/boot/grub2/0017-fs-xfs-Ensuring-failing-to-mount-sets-a-grub_errno.patch b/boot/grub2/0017-fs-xfs-Ensuring-failing-to-mount-sets-a-grub_errno.patch deleted file mode 100644 index 98d1be15443..00000000000 --- a/boot/grub2/0017-fs-xfs-Ensuring-failing-to-mount-sets-a-grub_errno.patch +++ /dev/null @@ -1,47 +0,0 @@ -From 9a5c23756f2e2d4ee8438bf449881c8f854e59ab Mon Sep 17 00:00:00 2001 -From: B Horn -Date: Sun, 12 May 2024 06:03:58 +0100 -Subject: [PATCH] fs/xfs: Ensuring failing to mount sets a grub_errno - -It was previously possible for grub_xfs_mount() to return NULL without -setting grub_errno if the XFS version was invalid. This resulted in it -being possible for grub_dl_unref() to be called twice allowing the XFS -module to be unloaded while there were still references to it. - -Fixing this problem in general by ensuring a grub_errno is set if the -fail label is reached. - -Reported-by: B Horn -Signed-off-by: B Horn -Reviewed-by: Daniel Kiper -Upstream: d1d6b7ea58aa5a80a4c4d0666b49460056c8ef0a -Signed-off-by: Thomas Petazzoni ---- - grub-core/fs/xfs.c | 4 +++- - 1 file changed, 3 insertions(+), 1 deletion(-) - -diff --git a/grub-core/fs/xfs.c b/grub-core/fs/xfs.c -index d2d533531..56738a135 100644 ---- a/grub-core/fs/xfs.c -+++ b/grub-core/fs/xfs.c -@@ -327,6 +327,8 @@ static int grub_xfs_sb_valid(struct grub_xfs_data *data) - } - return 1; - } -+ -+ grub_error (GRUB_ERR_BAD_FS, "unsupported XFS filesystem version"); - return 0; - } - -@@ -1058,7 +1060,7 @@ grub_xfs_mount (grub_disk_t disk) - return data; - fail: - -- if (grub_errno == GRUB_ERR_OUT_OF_RANGE) -+ if (grub_errno == GRUB_ERR_OUT_OF_RANGE || grub_errno == GRUB_ERR_NONE) - grub_error (GRUB_ERR_BAD_FS, "not an XFS filesystem"); - - grub_free (data); --- -2.50.1 - diff --git a/boot/grub2/0018-kern-file-Ensure-file-data-is-set.patch b/boot/grub2/0018-kern-file-Ensure-file-data-is-set.patch deleted file mode 100644 index 1b84ef304b7..00000000000 --- a/boot/grub2/0018-kern-file-Ensure-file-data-is-set.patch +++ /dev/null @@ -1,37 +0,0 @@ -From 816fb20ed0a80032e2eaf4c4ccaf989bf20908be Mon Sep 17 00:00:00 2001 -From: B Horn -Date: Sun, 12 May 2024 03:01:40 +0100 -Subject: [PATCH] kern/file: Ensure file->data is set - -This is to avoid a generic issue were some filesystems would not set -data and also not set a grub_errno. This meant it was possible for many -filesystems to grub_dl_unref() themselves multiple times resulting in -it being possible to unload the filesystems while there were still -references to them, e.g., via a loopback. - -Reported-by: B Horn -Signed-off-by: B Horn -Reviewed-by: Daniel Kiper -Upstream: a7910687294b29288ac649e71b47493c93294f17 -Signed-off-by: Thomas Petazzoni ---- - grub-core/kern/file.c | 3 +++ - 1 file changed, 3 insertions(+) - -diff --git a/grub-core/kern/file.c b/grub-core/kern/file.c -index 750177248..e990507fc 100644 ---- a/grub-core/kern/file.c -+++ b/grub-core/kern/file.c -@@ -114,6 +114,9 @@ grub_file_open (const char *name, enum grub_file_type type) - if ((file->fs->fs_open) (file, file_name) != GRUB_ERR_NONE) - goto fail; - -+ if (file->data == NULL) -+ goto fail; -+ - file->name = grub_strdup (name); - grub_errno = GRUB_ERR_NONE; - --- -2.50.1 - diff --git a/boot/grub2/0019-kern-file-Implement-filesystem-reference-counting.patch b/boot/grub2/0019-kern-file-Implement-filesystem-reference-counting.patch deleted file mode 100644 index 71c53efd445..00000000000 --- a/boot/grub2/0019-kern-file-Implement-filesystem-reference-counting.patch +++ /dev/null @@ -1,449 +0,0 @@ -From a27c4b6da2f4a014e5d096e75790e860bcdb2472 Mon Sep 17 00:00:00 2001 -From: B Horn -Date: Sun, 12 May 2024 10:15:03 +0100 -Subject: [PATCH] kern/file: Implement filesystem reference counting - -The grub_file_open() and grub_file_close() should be the only places -that allow a reference to a filesystem to stay open. So, add grub_dl_t -to grub_fs_t and set this in the GRUB_MOD_INIT() for each filesystem to -avoid issues when filesystems forget to do it themselves or do not track -their own references, e.g. squash4. - -The fs_label(), fs_uuid(), fs_mtime() and fs_read() should all ref and -unref in the same function but it is essentially redundant in GRUB -single threaded model. - -Signed-off-by: B Horn -Reviewed-by: Daniel Kiper - -Conflicts: - grub-core/fs/erofs.c - -Upstream: 16f196874fbe360a1b3c66064ec15adadf94c57b -Signed-off-by: Thomas Petazzoni ---- - grub-core/fs/affs.c | 1 + - grub-core/fs/bfs.c | 1 + - grub-core/fs/btrfs.c | 1 + - grub-core/fs/cbfs.c | 1 + - grub-core/fs/cpio.c | 1 + - grub-core/fs/cpio_be.c | 1 + - grub-core/fs/ext2.c | 1 + - grub-core/fs/f2fs.c | 1 + - grub-core/fs/fat.c | 1 + - grub-core/fs/hfs.c | 1 + - grub-core/fs/hfsplus.c | 1 + - grub-core/fs/iso9660.c | 1 + - grub-core/fs/jfs.c | 1 + - grub-core/fs/minix.c | 1 + - grub-core/fs/newc.c | 1 + - grub-core/fs/nilfs2.c | 1 + - grub-core/fs/ntfs.c | 1 + - grub-core/fs/odc.c | 1 + - grub-core/fs/proc.c | 1 + - grub-core/fs/reiserfs.c | 1 + - grub-core/fs/romfs.c | 1 + - grub-core/fs/sfs.c | 1 + - grub-core/fs/squash4.c | 1 + - grub-core/fs/tar.c | 1 + - grub-core/fs/udf.c | 1 + - grub-core/fs/ufs.c | 1 + - grub-core/fs/xfs.c | 1 + - grub-core/fs/zfs/zfs.c | 1 + - grub-core/kern/file.c | 7 +++++++ - include/grub/fs.h | 4 ++++ - 30 files changed, 39 insertions(+) - -diff --git a/grub-core/fs/affs.c b/grub-core/fs/affs.c -index ed606b3f1..9b0afb954 100644 ---- a/grub-core/fs/affs.c -+++ b/grub-core/fs/affs.c -@@ -703,6 +703,7 @@ static struct grub_fs grub_affs_fs = - - GRUB_MOD_INIT(affs) - { -+ grub_affs_fs.mod = mod; - grub_fs_register (&grub_affs_fs); - my_mod = mod; - } -diff --git a/grub-core/fs/bfs.c b/grub-core/fs/bfs.c -index 07cb3e3ac..f37b16895 100644 ---- a/grub-core/fs/bfs.c -+++ b/grub-core/fs/bfs.c -@@ -1106,6 +1106,7 @@ GRUB_MOD_INIT (bfs) - { - COMPILE_TIME_ASSERT (1 << LOG_EXTENT_SIZE == - sizeof (struct grub_bfs_extent)); -+ grub_bfs_fs.mod = mod; - grub_fs_register (&grub_bfs_fs); - } - -diff --git a/grub-core/fs/btrfs.c b/grub-core/fs/btrfs.c -index ba0c58352..aae81482b 100644 ---- a/grub-core/fs/btrfs.c -+++ b/grub-core/fs/btrfs.c -@@ -2413,6 +2413,7 @@ static struct grub_fs grub_btrfs_fs = { - - GRUB_MOD_INIT (btrfs) - { -+ grub_btrfs_fs.mod = mod; - grub_fs_register (&grub_btrfs_fs); - } - -diff --git a/grub-core/fs/cbfs.c b/grub-core/fs/cbfs.c -index 8ab7106af..2332745fe 100644 ---- a/grub-core/fs/cbfs.c -+++ b/grub-core/fs/cbfs.c -@@ -390,6 +390,7 @@ GRUB_MOD_INIT (cbfs) - #if (defined (__i386__) || defined (__x86_64__)) && !defined (GRUB_UTIL) && !defined (GRUB_MACHINE_EMU) && !defined (GRUB_MACHINE_XEN) - init_cbfsdisk (); - #endif -+ grub_cbfs_fs.mod = mod; - grub_fs_register (&grub_cbfs_fs); - } - -diff --git a/grub-core/fs/cpio.c b/grub-core/fs/cpio.c -index dab5f9898..1799f7ff5 100644 ---- a/grub-core/fs/cpio.c -+++ b/grub-core/fs/cpio.c -@@ -52,6 +52,7 @@ read_number (const grub_uint16_t *arr, grub_size_t size) - - GRUB_MOD_INIT (cpio) - { -+ grub_cpio_fs.mod = mod; - grub_fs_register (&grub_cpio_fs); - } - -diff --git a/grub-core/fs/cpio_be.c b/grub-core/fs/cpio_be.c -index 846548892..7bed1b848 100644 ---- a/grub-core/fs/cpio_be.c -+++ b/grub-core/fs/cpio_be.c -@@ -52,6 +52,7 @@ read_number (const grub_uint16_t *arr, grub_size_t size) - - GRUB_MOD_INIT (cpio_be) - { -+ grub_cpio_fs.mod = mod; - grub_fs_register (&grub_cpio_fs); - } - -diff --git a/grub-core/fs/ext2.c b/grub-core/fs/ext2.c -index 3f9f6b208..c3058f7e7 100644 ---- a/grub-core/fs/ext2.c -+++ b/grub-core/fs/ext2.c -@@ -1131,6 +1131,7 @@ static struct grub_fs grub_ext2_fs = - - GRUB_MOD_INIT(ext2) - { -+ grub_ext2_fs.mod = mod; - grub_fs_register (&grub_ext2_fs); - my_mod = mod; - } -diff --git a/grub-core/fs/f2fs.c b/grub-core/fs/f2fs.c -index db8a65f8d..f6d6beaa5 100644 ---- a/grub-core/fs/f2fs.c -+++ b/grub-core/fs/f2fs.c -@@ -1353,6 +1353,7 @@ static struct grub_fs grub_f2fs_fs = { - - GRUB_MOD_INIT (f2fs) - { -+ grub_f2fs_fs.mod = mod; - grub_fs_register (&grub_f2fs_fs); - my_mod = mod; - } -diff --git a/grub-core/fs/fat.c b/grub-core/fs/fat.c -index c5efed724..6e62b915d 100644 ---- a/grub-core/fs/fat.c -+++ b/grub-core/fs/fat.c -@@ -1312,6 +1312,7 @@ GRUB_MOD_INIT(fat) - #endif - { - COMPILE_TIME_ASSERT (sizeof (struct grub_fat_dir_entry) == 32); -+ grub_fat_fs.mod = mod; - grub_fs_register (&grub_fat_fs); - my_mod = mod; - } -diff --git a/grub-core/fs/hfs.c b/grub-core/fs/hfs.c -index 920112b03..ce7581dd5 100644 ---- a/grub-core/fs/hfs.c -+++ b/grub-core/fs/hfs.c -@@ -1434,6 +1434,7 @@ static struct grub_fs grub_hfs_fs = - - GRUB_MOD_INIT(hfs) - { -+ grub_hfs_fs.mod = mod; - if (!grub_is_lockdown ()) - grub_fs_register (&grub_hfs_fs); - my_mod = mod; -diff --git a/grub-core/fs/hfsplus.c b/grub-core/fs/hfsplus.c -index de71fd486..3f203abcc 100644 ---- a/grub-core/fs/hfsplus.c -+++ b/grub-core/fs/hfsplus.c -@@ -1176,6 +1176,7 @@ static struct grub_fs grub_hfsplus_fs = - - GRUB_MOD_INIT(hfsplus) - { -+ grub_hfsplus_fs.mod = mod; - grub_fs_register (&grub_hfsplus_fs); - my_mod = mod; - } -diff --git a/grub-core/fs/iso9660.c b/grub-core/fs/iso9660.c -index 8e3c95c4f..c73cb9ce0 100644 ---- a/grub-core/fs/iso9660.c -+++ b/grub-core/fs/iso9660.c -@@ -1260,6 +1260,7 @@ static struct grub_fs grub_iso9660_fs = - - GRUB_MOD_INIT(iso9660) - { -+ grub_iso9660_fs.mod = mod; - grub_fs_register (&grub_iso9660_fs); - my_mod = mod; - } -diff --git a/grub-core/fs/jfs.c b/grub-core/fs/jfs.c -index 70a2f4947..b0283ac00 100644 ---- a/grub-core/fs/jfs.c -+++ b/grub-core/fs/jfs.c -@@ -1005,6 +1005,7 @@ static struct grub_fs grub_jfs_fs = - - GRUB_MOD_INIT(jfs) - { -+ grub_jfs_fs.mod = mod; - grub_fs_register (&grub_jfs_fs); - my_mod = mod; - } -diff --git a/grub-core/fs/minix.c b/grub-core/fs/minix.c -index 5354951d1..b7679c3e2 100644 ---- a/grub-core/fs/minix.c -+++ b/grub-core/fs/minix.c -@@ -734,6 +734,7 @@ GRUB_MOD_INIT(minix) - #endif - #endif - { -+ grub_minix_fs.mod = mod; - grub_fs_register (&grub_minix_fs); - my_mod = mod; - } -diff --git a/grub-core/fs/newc.c b/grub-core/fs/newc.c -index 4fb8b2e3d..43b7f8b64 100644 ---- a/grub-core/fs/newc.c -+++ b/grub-core/fs/newc.c -@@ -64,6 +64,7 @@ read_number (const char *str, grub_size_t size) - - GRUB_MOD_INIT (newc) - { -+ grub_cpio_fs.mod = mod; - grub_fs_register (&grub_cpio_fs); - } - -diff --git a/grub-core/fs/nilfs2.c b/grub-core/fs/nilfs2.c -index fc7374ead..4e1e71738 100644 ---- a/grub-core/fs/nilfs2.c -+++ b/grub-core/fs/nilfs2.c -@@ -1231,6 +1231,7 @@ GRUB_MOD_INIT (nilfs2) - grub_nilfs2_dat_entry)); - COMPILE_TIME_ASSERT (1 << LOG_INODE_SIZE - == sizeof (struct grub_nilfs2_inode)); -+ grub_nilfs2_fs.mod = mod; - grub_fs_register (&grub_nilfs2_fs); - my_mod = mod; - } -diff --git a/grub-core/fs/ntfs.c b/grub-core/fs/ntfs.c -index de435aa14..560917dc2 100644 ---- a/grub-core/fs/ntfs.c -+++ b/grub-core/fs/ntfs.c -@@ -1320,6 +1320,7 @@ static struct grub_fs grub_ntfs_fs = - - GRUB_MOD_INIT (ntfs) - { -+ grub_ntfs_fs.mod = mod; - grub_fs_register (&grub_ntfs_fs); - my_mod = mod; - } -diff --git a/grub-core/fs/odc.c b/grub-core/fs/odc.c -index 790000622..8e4e8aeac 100644 ---- a/grub-core/fs/odc.c -+++ b/grub-core/fs/odc.c -@@ -52,6 +52,7 @@ read_number (const char *str, grub_size_t size) - - GRUB_MOD_INIT (odc) - { -+ grub_cpio_fs.mod = mod; - grub_fs_register (&grub_cpio_fs); - } - -diff --git a/grub-core/fs/proc.c b/grub-core/fs/proc.c -index 5f516502d..bcde43349 100644 ---- a/grub-core/fs/proc.c -+++ b/grub-core/fs/proc.c -@@ -192,6 +192,7 @@ static struct grub_fs grub_procfs_fs = - - GRUB_MOD_INIT (procfs) - { -+ grub_procfs_fs.mod = mod; - grub_disk_dev_register (&grub_procfs_dev); - grub_fs_register (&grub_procfs_fs); - } -diff --git a/grub-core/fs/reiserfs.c b/grub-core/fs/reiserfs.c -index 36b26ac98..c3850e013 100644 ---- a/grub-core/fs/reiserfs.c -+++ b/grub-core/fs/reiserfs.c -@@ -1417,6 +1417,7 @@ static struct grub_fs grub_reiserfs_fs = - - GRUB_MOD_INIT(reiserfs) - { -+ grub_reiserfs_fs.mod = mod; - grub_fs_register (&grub_reiserfs_fs); - my_mod = mod; - } -diff --git a/grub-core/fs/romfs.c b/grub-core/fs/romfs.c -index 1f7dcfca1..56b0b2b2f 100644 ---- a/grub-core/fs/romfs.c -+++ b/grub-core/fs/romfs.c -@@ -475,6 +475,7 @@ static struct grub_fs grub_romfs_fs = - - GRUB_MOD_INIT(romfs) - { -+ grub_romfs_fs.mod = mod; - grub_fs_register (&grub_romfs_fs); - } - -diff --git a/grub-core/fs/sfs.c b/grub-core/fs/sfs.c -index 983e88008..f0d7cac43 100644 ---- a/grub-core/fs/sfs.c -+++ b/grub-core/fs/sfs.c -@@ -779,6 +779,7 @@ static struct grub_fs grub_sfs_fs = - - GRUB_MOD_INIT(sfs) - { -+ grub_sfs_fs.mod = mod; - grub_fs_register (&grub_sfs_fs); - my_mod = mod; - } -diff --git a/grub-core/fs/squash4.c b/grub-core/fs/squash4.c -index a30e6ebe1..6e9d63874 100644 ---- a/grub-core/fs/squash4.c -+++ b/grub-core/fs/squash4.c -@@ -1044,6 +1044,7 @@ static struct grub_fs grub_squash_fs = - - GRUB_MOD_INIT(squash4) - { -+ grub_squash_fs.mod = mod; - grub_fs_register (&grub_squash_fs); - } - -diff --git a/grub-core/fs/tar.c b/grub-core/fs/tar.c -index 386c09022..fd2ec1f74 100644 ---- a/grub-core/fs/tar.c -+++ b/grub-core/fs/tar.c -@@ -354,6 +354,7 @@ static struct grub_fs grub_cpio_fs = { - - GRUB_MOD_INIT (tar) - { -+ grub_cpio_fs.mod = mod; - grub_fs_register (&grub_cpio_fs); - } - -diff --git a/grub-core/fs/udf.c b/grub-core/fs/udf.c -index b836e6107..8765c633c 100644 ---- a/grub-core/fs/udf.c -+++ b/grub-core/fs/udf.c -@@ -1455,6 +1455,7 @@ static struct grub_fs grub_udf_fs = { - - GRUB_MOD_INIT (udf) - { -+ grub_udf_fs.mod = mod; - grub_fs_register (&grub_udf_fs); - my_mod = mod; - } -diff --git a/grub-core/fs/ufs.c b/grub-core/fs/ufs.c -index 01235101b..e82d9356d 100644 ---- a/grub-core/fs/ufs.c -+++ b/grub-core/fs/ufs.c -@@ -899,6 +899,7 @@ GRUB_MOD_INIT(ufs1) - #endif - #endif - { -+ grub_ufs_fs.mod = mod; - grub_fs_register (&grub_ufs_fs); - my_mod = mod; - } -diff --git a/grub-core/fs/xfs.c b/grub-core/fs/xfs.c -index 56738a135..74feeb86a 100644 ---- a/grub-core/fs/xfs.c -+++ b/grub-core/fs/xfs.c -@@ -1294,6 +1294,7 @@ static struct grub_fs grub_xfs_fs = - - GRUB_MOD_INIT(xfs) - { -+ grub_xfs_fs.mod = mod; - grub_fs_register (&grub_xfs_fs); - my_mod = mod; - } -diff --git a/grub-core/fs/zfs/zfs.c b/grub-core/fs/zfs/zfs.c -index b5453e006..a497b1869 100644 ---- a/grub-core/fs/zfs/zfs.c -+++ b/grub-core/fs/zfs/zfs.c -@@ -4424,6 +4424,7 @@ static struct grub_fs grub_zfs_fs = { - GRUB_MOD_INIT (zfs) - { - COMPILE_TIME_ASSERT (sizeof (zap_leaf_chunk_t) == ZAP_LEAF_CHUNKSIZE); -+ grub_zfs_fs.mod = mod; - grub_fs_register (&grub_zfs_fs); - #ifndef GRUB_UTIL - my_mod = mod; -diff --git a/grub-core/kern/file.c b/grub-core/kern/file.c -index e990507fc..6e7efe89a 100644 ---- a/grub-core/kern/file.c -+++ b/grub-core/kern/file.c -@@ -25,6 +25,7 @@ - #include - #include - #include -+#include - - void (*EXPORT_VAR (grub_grubnet_fini)) (void); - -@@ -117,6 +118,9 @@ grub_file_open (const char *name, enum grub_file_type type) - if (file->data == NULL) - goto fail; - -+ if (file->fs->mod) -+ grub_dl_ref (file->fs->mod); -+ - file->name = grub_strdup (name); - grub_errno = GRUB_ERR_NONE; - -@@ -197,6 +201,9 @@ grub_file_read (grub_file_t file, void *buf, grub_size_t len) - grub_err_t - grub_file_close (grub_file_t file) - { -+ if (file->fs->mod) -+ grub_dl_unref (file->fs->mod); -+ - if (file->fs->fs_close) - (file->fs->fs_close) (file); - -diff --git a/include/grub/fs.h b/include/grub/fs.h -index 026bc3bb8..df4c93b16 100644 ---- a/include/grub/fs.h -+++ b/include/grub/fs.h -@@ -23,6 +23,7 @@ - #include - #include - #include -+#include - - #include - /* For embedding types. */ -@@ -57,6 +58,9 @@ struct grub_fs - /* My name. */ - const char *name; - -+ /* My module */ -+ grub_dl_t mod; -+ - /* Call HOOK with each file under DIR. */ - grub_err_t (*fs_dir) (grub_device_t device, const char *path, - grub_fs_dir_hook_t hook, void *hook_data); --- -2.50.1 - diff --git a/boot/grub2/0020-disk-loopback-Reference-tracking-for-the-loopback.patch b/boot/grub2/0020-disk-loopback-Reference-tracking-for-the-loopback.patch deleted file mode 100644 index 5295251e154..00000000000 --- a/boot/grub2/0020-disk-loopback-Reference-tracking-for-the-loopback.patch +++ /dev/null @@ -1,108 +0,0 @@ -From a81ef3044791e7ee02bd349b5ec0adcbf6947555 Mon Sep 17 00:00:00 2001 -From: B Horn -Date: Sun, 12 May 2024 03:26:19 +0100 -Subject: [PATCH] disk/loopback: Reference tracking for the loopback - -It was possible to delete a loopback while there were still references -to it. This led to an exploitable use-after-free. - -Fixed by implementing a reference counting in the grub_loopback struct. - -Reported-by: B Horn -Signed-off-by: B Horn -Reviewed-by: Daniel Kiper -Upstream: 67f70f70a36b6e87a65f928fe1e840a12eafb7ae -Signed-off-by: Thomas Petazzoni ---- - grub-core/disk/loopback.c | 18 ++++++++++++++++++ - include/grub/err.h | 3 ++- - 2 files changed, 20 insertions(+), 1 deletion(-) - -diff --git a/grub-core/disk/loopback.c b/grub-core/disk/loopback.c -index 4635dcfde..2bea4e922 100644 ---- a/grub-core/disk/loopback.c -+++ b/grub-core/disk/loopback.c -@@ -24,6 +24,7 @@ - #include - #include - #include -+#include - - GRUB_MOD_LICENSE ("GPLv3+"); - -@@ -33,6 +34,7 @@ struct grub_loopback - grub_file_t file; - struct grub_loopback *next; - unsigned long id; -+ grub_uint64_t refcnt; - }; - - static struct grub_loopback *loopback_list; -@@ -64,6 +66,8 @@ delete_loopback (const char *name) - if (! dev) - return grub_error (GRUB_ERR_BAD_DEVICE, "device not found"); - -+ if (dev->refcnt > 0) -+ return grub_error (GRUB_ERR_STILL_REFERENCED, "device still referenced"); - /* Remove the device from the list. */ - *prev = dev->next; - -@@ -120,6 +124,7 @@ grub_cmd_loopback (grub_extcmd_context_t ctxt, int argc, char **args) - - newdev->file = file; - newdev->id = last_id++; -+ newdev->refcnt = 0; - - /* Add the new entry to the list. */ - newdev->next = loopback_list; -@@ -161,6 +166,9 @@ grub_loopback_open (const char *name, grub_disk_t disk) - if (! dev) - return grub_error (GRUB_ERR_UNKNOWN_DEVICE, "can't open device"); - -+ if (grub_add (dev->refcnt, 1, &dev->refcnt)) -+ grub_fatal ("Reference count overflow"); -+ - /* Use the filesize for the disk size, round up to a complete sector. */ - if (dev->file->size != GRUB_FILE_SIZE_UNKNOWN) - disk->total_sectors = ((dev->file->size + GRUB_DISK_SECTOR_SIZE - 1) -@@ -178,6 +186,15 @@ grub_loopback_open (const char *name, grub_disk_t disk) - return 0; - } - -+static void -+grub_loopback_close (grub_disk_t disk) -+{ -+ struct grub_loopback *dev = disk->data; -+ -+ if (grub_sub (dev->refcnt, 1, &dev->refcnt)) -+ grub_fatal ("Reference count underflow"); -+} -+ - static grub_err_t - grub_loopback_read (grub_disk_t disk, grub_disk_addr_t sector, - grub_size_t size, char *buf) -@@ -220,6 +237,7 @@ static struct grub_disk_dev grub_loopback_dev = - .id = GRUB_DISK_DEVICE_LOOPBACK_ID, - .disk_iterate = grub_loopback_iterate, - .disk_open = grub_loopback_open, -+ .disk_close = grub_loopback_close, - .disk_read = grub_loopback_read, - .disk_write = grub_loopback_write, - .next = 0 -diff --git a/include/grub/err.h b/include/grub/err.h -index 1c07034cd..b0e54e0a0 100644 ---- a/include/grub/err.h -+++ b/include/grub/err.h -@@ -73,7 +73,8 @@ typedef enum - GRUB_ERR_NET_NO_DOMAIN, - GRUB_ERR_EOF, - GRUB_ERR_BAD_SIGNATURE, -- GRUB_ERR_BAD_FIRMWARE -+ GRUB_ERR_BAD_FIRMWARE, -+ GRUB_ERR_STILL_REFERENCED - } - grub_err_t; - --- -2.50.1 - diff --git a/boot/grub2/0021-kern-disk-Limit-recursion-depth.patch b/boot/grub2/0021-kern-disk-Limit-recursion-depth.patch deleted file mode 100644 index 8d2390ac551..00000000000 --- a/boot/grub2/0021-kern-disk-Limit-recursion-depth.patch +++ /dev/null @@ -1,125 +0,0 @@ -From 195331a7a64c2a4ba754e2527ca8973012db68c9 Mon Sep 17 00:00:00 2001 -From: B Horn -Date: Sun, 12 May 2024 04:09:24 +0100 -Subject: [PATCH] kern/disk: Limit recursion depth - -The grub_disk_read() may trigger other disk reads, e.g. via loopbacks. -This may lead to very deep recursion which can corrupt the heap. So, fix -the issue by limiting reads depth. - -Reported-by: B Horn -Signed-off-by: B Horn -Reviewed-by: Daniel Kiper -Upstream: 18212f0648b6de7d71d4c8f41eb4d8b78b3a299b -Signed-off-by: Thomas Petazzoni ---- - grub-core/kern/disk.c | 27 ++++++++++++++++++++------- - include/grub/err.h | 3 ++- - 2 files changed, 22 insertions(+), 8 deletions(-) - -diff --git a/grub-core/kern/disk.c b/grub-core/kern/disk.c -index 1eda58fe9..82e04fd00 100644 ---- a/grub-core/kern/disk.c -+++ b/grub-core/kern/disk.c -@@ -28,6 +28,10 @@ - - #define GRUB_CACHE_TIMEOUT 2 - -+/* Disk reads may trigger other disk reads. So, limit recursion depth. */ -+#define MAX_READ_RECURSION_DEPTH 16 -+static unsigned int read_recursion_depth = 0; -+ - /* The last time the disk was used. */ - static grub_uint64_t grub_last_time = 0; - -@@ -417,6 +421,8 @@ grub_err_t - grub_disk_read (grub_disk_t disk, grub_disk_addr_t sector, - grub_off_t offset, grub_size_t size, void *buf) - { -+ grub_err_t err = GRUB_ERR_NONE; -+ - /* First of all, check if the region is within the disk. */ - if (grub_disk_adjust_range (disk, §or, &offset, size) != GRUB_ERR_NONE) - { -@@ -427,12 +433,17 @@ grub_disk_read (grub_disk_t disk, grub_disk_addr_t sector, - return grub_errno; - } - -+ if (++read_recursion_depth >= MAX_READ_RECURSION_DEPTH) -+ { -+ grub_error (GRUB_ERR_RECURSION_DEPTH, "grub_disk_read(): Maximum recursion depth exceeded"); -+ goto error; -+ } -+ - /* First read until first cache boundary. */ - if (offset || (sector & (GRUB_DISK_CACHE_SIZE - 1))) - { - grub_disk_addr_t start_sector; - grub_size_t pos; -- grub_err_t err; - grub_size_t len; - - start_sector = sector & ~((grub_disk_addr_t) GRUB_DISK_CACHE_SIZE - 1); -@@ -444,7 +455,7 @@ grub_disk_read (grub_disk_t disk, grub_disk_addr_t sector, - err = grub_disk_read_small (disk, start_sector, - offset + pos, len, buf); - if (err) -- return err; -+ goto error; - buf = (char *) buf + len; - size -= len; - offset += len; -@@ -457,7 +468,6 @@ grub_disk_read (grub_disk_t disk, grub_disk_addr_t sector, - { - char *data = NULL; - grub_disk_addr_t agglomerate; -- grub_err_t err; - - /* agglomerate read until we find a first cached entry. */ - for (agglomerate = 0; agglomerate -@@ -493,7 +503,7 @@ grub_disk_read (grub_disk_t disk, grub_disk_addr_t sector, - - disk->log_sector_size), - buf); - if (err) -- return err; -+ goto error; - - for (i = 0; i < agglomerate; i ++) - grub_disk_cache_store (disk->dev->id, disk->id, -@@ -527,13 +537,16 @@ grub_disk_read (grub_disk_t disk, grub_disk_addr_t sector, - /* And now read the last part. */ - if (size) - { -- grub_err_t err; - err = grub_disk_read_small (disk, sector, 0, size, buf); - if (err) -- return err; -+ goto error; - } - -- return grub_errno; -+ err = grub_errno; -+ -+ error: -+ read_recursion_depth--; -+ return err; - } - - grub_uint64_t -diff --git a/include/grub/err.h b/include/grub/err.h -index b0e54e0a0..202fa8a7a 100644 ---- a/include/grub/err.h -+++ b/include/grub/err.h -@@ -74,7 +74,8 @@ typedef enum - GRUB_ERR_EOF, - GRUB_ERR_BAD_SIGNATURE, - GRUB_ERR_BAD_FIRMWARE, -- GRUB_ERR_STILL_REFERENCED -+ GRUB_ERR_STILL_REFERENCED, -+ GRUB_ERR_RECURSION_DEPTH - } - grub_err_t; - --- -2.50.1 - diff --git a/boot/grub2/0022-kern-partition-Limit-recursion-in-part_iterate.patch b/boot/grub2/0022-kern-partition-Limit-recursion-in-part_iterate.patch deleted file mode 100644 index 03183abf2f2..00000000000 --- a/boot/grub2/0022-kern-partition-Limit-recursion-in-part_iterate.patch +++ /dev/null @@ -1,49 +0,0 @@ -From 3f1c5f55e7ef7b872c3ae59c0c41f1e07508a943 Mon Sep 17 00:00:00 2001 -From: B Horn -Date: Sat, 16 Nov 2024 21:24:19 +0000 -Subject: [PATCH] kern/partition: Limit recursion in part_iterate() - -The part_iterate() is used by grub_partition_iterate() as a callback in -the partition iterate functions. However, part_iterate() may also call -the partition iterate functions which may lead to recursion. Fix potential -issue by limiting the recursion depth. - -Signed-off-by: B Horn -Reviewed-by: Daniel Kiper -Upstream: 8a7103fddfd6664f41081f3bb88eebbf2871da2a -Signed-off-by: Thomas Petazzoni ---- - grub-core/kern/partition.c | 10 +++++++++- - 1 file changed, 9 insertions(+), 1 deletion(-) - -diff --git a/grub-core/kern/partition.c b/grub-core/kern/partition.c -index edad9f9e4..704512a20 100644 ---- a/grub-core/kern/partition.c -+++ b/grub-core/kern/partition.c -@@ -28,6 +28,9 @@ - - grub_partition_map_t grub_partition_map_list; - -+#define MAX_RECURSION_DEPTH 32 -+static unsigned int recursion_depth = 0; -+ - /* - * Checks that disk->partition contains part. This function assumes that the - * start of part is relative to the start of disk->partition. Returns 1 if -@@ -208,7 +211,12 @@ part_iterate (grub_disk_t dsk, const grub_partition_t partition, void *data) - FOR_PARTITION_MAPS(partmap) - { - grub_err_t err; -- err = partmap->iterate (dsk, part_iterate, ctx); -+ recursion_depth++; -+ if (recursion_depth <= MAX_RECURSION_DEPTH) -+ err = partmap->iterate (dsk, part_iterate, ctx); -+ else -+ err = grub_error (GRUB_ERR_RECURSION_DEPTH, "maximum recursion depth exceeded"); -+ recursion_depth--; - if (err) - grub_errno = GRUB_ERR_NONE; - if (ctx->ret) --- -2.50.1 - diff --git a/boot/grub2/0023-script-execute-Limit-the-recursion-depth.patch b/boot/grub2/0023-script-execute-Limit-the-recursion-depth.patch deleted file mode 100644 index f0e922c27a0..00000000000 --- a/boot/grub2/0023-script-execute-Limit-the-recursion-depth.patch +++ /dev/null @@ -1,60 +0,0 @@ -From 2a094a7116c56519a42a13c96e77bdeda6069076 Mon Sep 17 00:00:00 2001 -From: B Horn -Date: Thu, 18 Apr 2024 19:04:13 +0100 -Subject: [PATCH] script/execute: Limit the recursion depth - -If unbounded recursion is allowed it becomes possible to collide the -stack with the heap. As UEFI firmware often lacks guard pages this -becomes an exploitable issue as it is possible in some cases to do -a controlled overwrite of a section of this heap region with -arbitrary data. - -Reported-by: B Horn -Signed-off-by: B Horn -Reviewed-by: Daniel Kiper -Upstream: d8a937ccae5c6d86dc4375698afca5cefdcd01e1 -Signed-off-by: Thomas Petazzoni ---- - grub-core/script/execute.c | 14 ++++++++++++++ - 1 file changed, 14 insertions(+) - -diff --git a/grub-core/script/execute.c b/grub-core/script/execute.c -index 14ff09094..e1450f45d 100644 ---- a/grub-core/script/execute.c -+++ b/grub-core/script/execute.c -@@ -33,10 +33,18 @@ - is sizeof (int) * 3, and one extra for a possible -ve sign. */ - #define ERRNO_DIGITS_MAX (sizeof (int) * 3 + 1) - -+/* -+ * A limit on recursion, to avoid colliding with the heap. UEFI defines a baseline -+ * stack size of 128 KiB. So, assuming at most 1-2 KiB per iteration this should -+ * keep us safe. -+ */ -+#define MAX_RECURSION_DEPTH 64 -+ - static unsigned long is_continue; - static unsigned long active_loops; - static unsigned long active_breaks; - static unsigned long function_return; -+static unsigned long recursion_depth; - - #define GRUB_SCRIPT_SCOPE_MALLOCED 1 - #define GRUB_SCRIPT_SCOPE_ARGS_MALLOCED 2 -@@ -816,7 +824,13 @@ grub_script_execute_cmd (struct grub_script_cmd *cmd) - if (cmd == 0) - return 0; - -+ recursion_depth++; -+ -+ if (recursion_depth >= MAX_RECURSION_DEPTH) -+ return grub_error (GRUB_ERR_RECURSION_DEPTH, N_("maximum recursion depth exceeded")); -+ - ret = cmd->exec (cmd); -+ recursion_depth--; - - grub_snprintf (errnobuf, sizeof (errnobuf), "%d", ret); - grub_env_set ("?", errnobuf); --- -2.50.1 - diff --git a/boot/grub2/0024-net-Unregister-net_default_ip-and-net_default_mac-va.patch b/boot/grub2/0024-net-Unregister-net_default_ip-and-net_default_mac-va.patch deleted file mode 100644 index 881493e5676..00000000000 --- a/boot/grub2/0024-net-Unregister-net_default_ip-and-net_default_mac-va.patch +++ /dev/null @@ -1,34 +0,0 @@ -From b9a8d2cb984f0a5fd92fe7275dfa280466dd82ce Mon Sep 17 00:00:00 2001 -From: B Horn -Date: Thu, 28 Nov 2024 04:05:04 +0000 -Subject: [PATCH] net: Unregister net_default_ip and net_default_mac variables - hooks on unload - -The net module is a dependency of normal. So, it shouldn't be possible -to unload the net. Though unregister variables hooks as a precaution. -It also gets in line with unregistering the other net module hooks. - -Signed-off-by: B Horn -Reviewed-by: Daniel Kiper -Upstream: a1dd8e59da26f1a9608381d3a1a6c0f465282b1d -Signed-off-by: Thomas Petazzoni ---- - grub-core/net/net.c | 2 ++ - 1 file changed, 2 insertions(+) - -diff --git a/grub-core/net/net.c b/grub-core/net/net.c -index 8cad4fb6d..f69c67b64 100644 ---- a/grub-core/net/net.c -+++ b/grub-core/net/net.c -@@ -2072,6 +2072,8 @@ GRUB_MOD_FINI(net) - { - grub_register_variable_hook ("net_default_server", 0, 0); - grub_register_variable_hook ("pxe_default_server", 0, 0); -+ grub_register_variable_hook ("net_default_ip", 0, 0); -+ grub_register_variable_hook ("net_default_mac", 0, 0); - - grub_bootp_fini (); - grub_dns_fini (); --- -2.50.1 - diff --git a/boot/grub2/0025-net-Remove-variables-hooks-when-interface-is-unregis.patch b/boot/grub2/0025-net-Remove-variables-hooks-when-interface-is-unregis.patch deleted file mode 100644 index 3c6bd1fc836..00000000000 --- a/boot/grub2/0025-net-Remove-variables-hooks-when-interface-is-unregis.patch +++ /dev/null @@ -1,93 +0,0 @@ -From 883c8721591c1f7a186e2f3cdc8a4f140bd81ce9 Mon Sep 17 00:00:00 2001 -From: B Horn -Date: Fri, 1 Nov 2024 23:49:48 +0000 -Subject: [PATCH] net: Remove variables hooks when interface is unregisted - -The grub_net_network_level_interface_unregister(), previously -implemented in a header, did not remove the variables hooks that -were registered in grub_net_network_level_interface_register(). -Fix this by implementing the same logic used to register the -variables and move the function into the grub-core/net/net.c. - -Signed-off-by: B Horn -Reviewed-by: Daniel Kiper - -Conflicts: - grub-core/net/net.c - -Upstream: aa8b4d7facef7b75a2703274b1b9d4e0e734c401 -Signed-off-by: Thomas Petazzoni ---- - grub-core/net/net.c | 33 +++++++++++++++++++++++++++++++++ - include/grub/net.h | 11 +---------- - 2 files changed, 34 insertions(+), 10 deletions(-) - -diff --git a/grub-core/net/net.c b/grub-core/net/net.c -index f69c67b64..8dbb0eada 100644 ---- a/grub-core/net/net.c -+++ b/grub-core/net/net.c -@@ -1094,6 +1094,39 @@ grub_cmd_delroute (struct grub_command *cmd __attribute__ ((unused)), - return GRUB_ERR_NONE; - } - -+void -+grub_net_network_level_interface_unregister (struct grub_net_network_level_interface *inter) -+{ -+ char *name; -+ -+ { -+ char buf[GRUB_NET_MAX_STR_HWADDR_LEN]; -+ -+ grub_net_hwaddr_to_str (&inter->hwaddress, buf); -+ name = grub_xasprintf ("net_%s_mac", inter->name); -+ if (name != NULL) -+ grub_register_variable_hook (name, NULL, NULL); -+ grub_free (name); -+ } -+ -+ { -+ char buf[GRUB_NET_MAX_STR_ADDR_LEN]; -+ -+ grub_net_addr_to_str (&inter->address, buf); -+ name = grub_xasprintf ("net_%s_ip", inter->name); -+ if (name != NULL) -+ grub_register_variable_hook (name, NULL, NULL); -+ grub_free (name); -+ } -+ -+ inter->card->num_ifaces--; -+ *inter->prev = inter->next; -+ if (inter->next) -+ inter->next->prev = inter->prev; -+ inter->next = 0; -+ inter->prev = 0; -+} -+ - grub_err_t - grub_net_add_route (const char *name, - grub_net_network_level_netaddress_t target, -diff --git a/include/grub/net.h b/include/grub/net.h -index 844e501c1..228d04963 100644 ---- a/include/grub/net.h -+++ b/include/grub/net.h -@@ -540,16 +540,7 @@ void grub_bootp_fini (void); - void grub_dns_init (void); - void grub_dns_fini (void); - --static inline void --grub_net_network_level_interface_unregister (struct grub_net_network_level_interface *inter) --{ -- inter->card->num_ifaces--; -- *inter->prev = inter->next; -- if (inter->next) -- inter->next->prev = inter->prev; -- inter->next = 0; -- inter->prev = 0; --} -+void grub_net_network_level_interface_unregister (struct grub_net_network_level_interface *inter); - - void - grub_net_tcp_retransmit (void); --- -2.50.1 - diff --git a/boot/grub2/0026-net-Fix-OOB-write-in-grub_net_search_config_file.patch b/boot/grub2/0026-net-Fix-OOB-write-in-grub_net_search_config_file.patch deleted file mode 100644 index b047b150bc3..00000000000 --- a/boot/grub2/0026-net-Fix-OOB-write-in-grub_net_search_config_file.patch +++ /dev/null @@ -1,89 +0,0 @@ -From 7ad4117be44d8cf0443bbc58d49e592a33aaac89 Mon Sep 17 00:00:00 2001 -From: B Horn -Date: Fri, 15 Nov 2024 13:12:09 +0000 -Subject: [PATCH] net: Fix OOB write in grub_net_search_config_file() - -The function included a call to grub_strcpy() which copied data from an -environment variable to a buffer allocated in grub_cmd_normal(). The -grub_cmd_normal() didn't consider the length of the environment variable. -So, the copy operation could exceed the allocation and lead to an OOB -write. Fix the issue by replacing grub_strcpy() with grub_strlcpy() and -pass the underlying buffers size to the grub_net_search_config_file(). - -Fixes: CVE-2025-0624 - -Reported-by: B Horn -Signed-off-by: B Horn -Reviewed-by: Daniel Kiper - -Conflicts: - grub-core/normal/main.c - -Upstream: 5eef88152833062a3f7e017535372d64ac8ef7e1 -Signed-off-by: Thomas Petazzoni ---- - grub-core/net/net.c | 7 ++++--- - grub-core/normal/main.c | 2 +- - include/grub/net.h | 2 +- - 3 files changed, 6 insertions(+), 5 deletions(-) - -diff --git a/grub-core/net/net.c b/grub-core/net/net.c -index 8dbb0eada..2bd490279 100644 ---- a/grub-core/net/net.c -+++ b/grub-core/net/net.c -@@ -1942,14 +1942,15 @@ grub_config_search_through (char *config, char *suffix, - } - - grub_err_t --grub_net_search_config_file (char *config) -+grub_net_search_config_file (char *config, grub_size_t config_buf_len) - { -- grub_size_t config_len; -+ grub_size_t config_len, suffix_len; - char *suffix; - - config_len = grub_strlen (config); - config[config_len] = '-'; - suffix = config + config_len + 1; -+ suffix_len = config_buf_len - (config_len + 1); - - struct grub_net_network_level_interface *inf; - FOR_NET_NETWORK_LEVEL_INTERFACES (inf) -@@ -1975,7 +1976,7 @@ grub_net_search_config_file (char *config) - - if (client_uuid) - { -- grub_strcpy (suffix, client_uuid); -+ grub_strlcpy (suffix, client_uuid, suffix_len); - if (grub_config_search_through (config, suffix, 1, 0) == 0) - return GRUB_ERR_NONE; - } -diff --git a/grub-core/normal/main.c b/grub-core/normal/main.c -index bd4431000..3b48cd333 100644 ---- a/grub-core/normal/main.c -+++ b/grub-core/normal/main.c -@@ -344,7 +344,7 @@ grub_cmd_normal (struct grub_command *cmd __attribute__ ((unused)), - - if (grub_strncmp (prefix + 1, "tftp", sizeof ("tftp") - 1) == 0 && - !disable_net_search) -- grub_net_search_config_file (config); -+ grub_net_search_config_file (config, config_len); - - grub_enter_normal_mode (config); - grub_free (config); -diff --git a/include/grub/net.h b/include/grub/net.h -index 228d04963..58a4f83fc 100644 ---- a/include/grub/net.h -+++ b/include/grub/net.h -@@ -570,7 +570,7 @@ void - grub_net_remove_dns_server (const struct grub_net_network_level_address *s); - - grub_err_t --grub_net_search_config_file (char *config); -+grub_net_search_config_file (char *config, grub_size_t config_buf_len); - - extern char *grub_net_default_server; - --- -2.50.1 - diff --git a/boot/grub2/0027-net-tftp-Fix-stack-buffer-overflow-in-tftp_open.patch b/boot/grub2/0027-net-tftp-Fix-stack-buffer-overflow-in-tftp_open.patch deleted file mode 100644 index 76b18ace8f6..00000000000 --- a/boot/grub2/0027-net-tftp-Fix-stack-buffer-overflow-in-tftp_open.patch +++ /dev/null @@ -1,120 +0,0 @@ -From 8284fca0f096d01f566eadfdc790232df9f2934e Mon Sep 17 00:00:00 2001 -From: B Horn -Date: Thu, 18 Apr 2024 17:32:34 +0100 -Subject: [PATCH] net/tftp: Fix stack buffer overflow in tftp_open() - -An overly long filename can be passed to tftp_open() which would cause -grub_normalize_filename() to write out of bounds. - -Fixed by adding an extra argument to grub_normalize_filename() for the -space available, making it act closer to a strlcpy(). As several fixed -strings are strcpy()'d after into the same buffer, their total length is -checked to see if they exceed the remaining space in the buffer. If so, -return an error. - -On the occasion simplify code a bit by removing unneeded rrqlen zeroing. - -Reported-by: B Horn -Signed-off-by: B Horn -Reviewed-by: Daniel Kiper -Upstream: 0707accab1b9be5d3645d4700dde3f99209f9367 -Signed-off-by: Thomas Petazzoni ---- - grub-core/net/tftp.c | 38 ++++++++++++++++++++++++-------------- - 1 file changed, 24 insertions(+), 14 deletions(-) - -diff --git a/grub-core/net/tftp.c b/grub-core/net/tftp.c -index 409b1d09b..336b78691 100644 ---- a/grub-core/net/tftp.c -+++ b/grub-core/net/tftp.c -@@ -266,17 +266,19 @@ tftp_receive (grub_net_udp_socket_t sock __attribute__ ((unused)), - * forward slashes to a single forward slash. - */ - static void --grub_normalize_filename (char *normalized, const char *filename) -+grub_normalize_filename (char *normalized, const char *filename, int c) - { - char *dest = normalized; - const char *src = filename; - -- while (*src != '\0') -+ while (*src != '\0' && c > 0) - { - if (src[0] == '/' && src[1] == '/') - src++; -- else -+ else { -+ c--; - *dest++ = *src++; -+ } - } - *dest = '\0'; - } -@@ -287,7 +289,7 @@ tftp_open (struct grub_file *file, const char *filename) - struct tftphdr *tftph; - char *rrq; - int i; -- int rrqlen; -+ int rrqlen, rrqsize; - int hdrlen; - grub_uint8_t open_data[1500]; - struct grub_net_buff nb; -@@ -315,37 +317,45 @@ tftp_open (struct grub_file *file, const char *filename) - - tftph = (struct tftphdr *) nb.data; - -- rrq = (char *) tftph->u.rrq; -- rrqlen = 0; -- - tftph->opcode = grub_cpu_to_be16_compile_time (TFTP_RRQ); - -+ rrq = (char *) tftph->u.rrq; -+ rrqsize = sizeof (tftph->u.rrq); -+ - /* - * Copy and normalize the filename to work-around issues on some TFTP - * servers when file names are being matched for remapping. - */ -- grub_normalize_filename (rrq, filename); -- rrqlen += grub_strlen (rrq) + 1; -+ grub_normalize_filename (rrq, filename, rrqsize); -+ -+ rrqlen = grub_strlen (rrq) + 1; - rrq += grub_strlen (rrq) + 1; - -- grub_strcpy (rrq, "octet"); -+ /* Verify there is enough space for the remaining components. */ - rrqlen += grub_strlen ("octet") + 1; -+ rrqlen += grub_strlen ("blksize") + 1; -+ rrqlen += grub_strlen ("1024") + 1; -+ rrqlen += grub_strlen ("tsize") + 1; -+ rrqlen += grub_strlen ("0") + 1; -+ -+ if (rrqlen >= rrqsize) { -+ grub_free (data); -+ return grub_error (GRUB_ERR_BAD_FILENAME, N_("filename too long")); -+ } -+ -+ grub_strcpy (rrq, "octet"); - rrq += grub_strlen ("octet") + 1; - - grub_strcpy (rrq, "blksize"); -- rrqlen += grub_strlen ("blksize") + 1; - rrq += grub_strlen ("blksize") + 1; - - grub_strcpy (rrq, "1024"); -- rrqlen += grub_strlen ("1024") + 1; - rrq += grub_strlen ("1024") + 1; - - grub_strcpy (rrq, "tsize"); -- rrqlen += grub_strlen ("tsize") + 1; - rrq += grub_strlen ("tsize") + 1; - - grub_strcpy (rrq, "0"); -- rrqlen += grub_strlen ("0") + 1; - rrq += grub_strlen ("0") + 1; - hdrlen = sizeof (tftph->opcode) + rrqlen; - --- -2.50.1 - diff --git a/boot/grub2/0028-video-readers-jpeg-Do-not-permit-duplicate-SOF0-mark.patch b/boot/grub2/0028-video-readers-jpeg-Do-not-permit-duplicate-SOF0-mark.patch deleted file mode 100644 index 6ea951225a4..00000000000 --- a/boot/grub2/0028-video-readers-jpeg-Do-not-permit-duplicate-SOF0-mark.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 8368710fbce5c040227fca8bf10828ad1632f84f Mon Sep 17 00:00:00 2001 -From: Daniel Axtens -Date: Fri, 8 Mar 2024 22:47:20 +1100 -Subject: [PATCH] video/readers/jpeg: Do not permit duplicate SOF0 markers in - JPEG - -Otherwise a subsequent header could change the height and width -allowing future OOB writes. - -Fixes: CVE-2024-45774 - -Reported-by: Nils Langius -Signed-off-by: Daniel Axtens -Reviewed-by: Daniel Kiper -Upstream: 2c34af908ebf4856051ed29e46d88abd2b20387f -Signed-off-by: Thomas Petazzoni ---- - grub-core/video/readers/jpeg.c | 4 ++++ - 1 file changed, 4 insertions(+) - -diff --git a/grub-core/video/readers/jpeg.c b/grub-core/video/readers/jpeg.c -index ae634fd41..631a89356 100644 ---- a/grub-core/video/readers/jpeg.c -+++ b/grub-core/video/readers/jpeg.c -@@ -339,6 +339,10 @@ grub_jpeg_decode_sof (struct grub_jpeg_data *data) - if (grub_errno != GRUB_ERR_NONE) - return grub_errno; - -+ if (data->image_height != 0 || data->image_width != 0) -+ return grub_error (GRUB_ERR_BAD_FILE_TYPE, -+ "jpeg: cannot have duplicate SOF0 markers"); -+ - if (grub_jpeg_get_byte (data) != 8) - return grub_error (GRUB_ERR_BAD_FILE_TYPE, - "jpeg: only 8-bit precision is supported"); --- -2.50.1 - diff --git a/boot/grub2/0029-kern-dl-Fix-for-an-integer-overflow-in-grub_dl_ref.patch b/boot/grub2/0029-kern-dl-Fix-for-an-integer-overflow-in-grub_dl_ref.patch deleted file mode 100644 index cea0dede419..00000000000 --- a/boot/grub2/0029-kern-dl-Fix-for-an-integer-overflow-in-grub_dl_ref.patch +++ /dev/null @@ -1,143 +0,0 @@ -From 4d70ddc5255b6d3f752da4120f593d7007222ca2 Mon Sep 17 00:00:00 2001 -From: B Horn -Date: Thu, 18 Apr 2024 15:59:26 +0100 -Subject: [PATCH] kern/dl: Fix for an integer overflow in grub_dl_ref() - -It was possible to overflow the value of mod->ref_count, a signed -integer, by repeatedly invoking insmod on an already loaded module. -This led to a use-after-free. As once ref_count was overflowed it became -possible to unload the module while there was still references to it. - -This resolves the issue by using grub_add() to check if the ref_count -will overflow and then stops further increments. Further changes were -also made to grub_dl_unref() to check for the underflow condition and -the reference count was changed to an unsigned 64-bit integer. - -Reported-by: B Horn -Signed-off-by: B Horn -Reviewed-by: Daniel Kiper -Upstream: 500e5fdd82ca40412b0b73f5e5dda38e4a3af96d -Signed-off-by: Thomas Petazzoni ---- - grub-core/commands/minicmd.c | 2 +- - grub-core/kern/dl.c | 17 ++++++++++++----- - include/grub/dl.h | 8 ++++---- - util/misc.c | 4 ++-- - 4 files changed, 19 insertions(+), 12 deletions(-) - -diff --git a/grub-core/commands/minicmd.c b/grub-core/commands/minicmd.c -index fa498931e..286290866 100644 ---- a/grub-core/commands/minicmd.c -+++ b/grub-core/commands/minicmd.c -@@ -167,7 +167,7 @@ grub_mini_cmd_lsmod (struct grub_command *cmd __attribute__ ((unused)), - { - grub_dl_dep_t dep; - -- grub_printf ("%s\t%d\t\t", mod->name, mod->ref_count); -+ grub_printf ("%s\t%" PRIuGRUB_UINT64_T "\t\t", mod->name, mod->ref_count); - for (dep = mod->dep; dep; dep = dep->next) - { - if (dep != mod->dep) -diff --git a/grub-core/kern/dl.c b/grub-core/kern/dl.c -index 0bf40caa6..1a38742e6 100644 ---- a/grub-core/kern/dl.c -+++ b/grub-core/kern/dl.c -@@ -32,6 +32,7 @@ - #include - #include - #include -+#include - - /* Platforms where modules are in a readonly area of memory. */ - #if defined(GRUB_MACHINE_QEMU) -@@ -532,7 +533,7 @@ grub_dl_resolve_dependencies (grub_dl_t mod, Elf_Ehdr *e) - return GRUB_ERR_NONE; - } - --int -+grub_uint64_t - grub_dl_ref (grub_dl_t mod) - { - grub_dl_dep_t dep; -@@ -543,10 +544,13 @@ grub_dl_ref (grub_dl_t mod) - for (dep = mod->dep; dep; dep = dep->next) - grub_dl_ref (dep->mod); - -- return ++mod->ref_count; -+ if (grub_add (mod->ref_count, 1, &mod->ref_count)) -+ grub_fatal ("Module reference count overflow"); -+ -+ return mod->ref_count; - } - --int -+grub_uint64_t - grub_dl_unref (grub_dl_t mod) - { - grub_dl_dep_t dep; -@@ -557,10 +561,13 @@ grub_dl_unref (grub_dl_t mod) - for (dep = mod->dep; dep; dep = dep->next) - grub_dl_unref (dep->mod); - -- return --mod->ref_count; -+ if (grub_sub (mod->ref_count, 1, &mod->ref_count)) -+ grub_fatal ("Module reference count underflow"); -+ -+ return mod->ref_count; - } - --int -+grub_uint64_t - grub_dl_ref_count (grub_dl_t mod) - { - if (mod == NULL) -diff --git a/include/grub/dl.h b/include/grub/dl.h -index cd1f46c8b..f0a94e273 100644 ---- a/include/grub/dl.h -+++ b/include/grub/dl.h -@@ -174,7 +174,7 @@ typedef struct grub_dl_dep *grub_dl_dep_t; - struct grub_dl - { - char *name; -- int ref_count; -+ grub_uint64_t ref_count; - int persistent; - grub_dl_dep_t dep; - grub_dl_segment_t segment; -@@ -203,9 +203,9 @@ grub_dl_t EXPORT_FUNC(grub_dl_load) (const char *name); - grub_dl_t grub_dl_load_core (void *addr, grub_size_t size); - grub_dl_t EXPORT_FUNC(grub_dl_load_core_noinit) (void *addr, grub_size_t size); - int EXPORT_FUNC(grub_dl_unload) (grub_dl_t mod); --extern int EXPORT_FUNC(grub_dl_ref) (grub_dl_t mod); --extern int EXPORT_FUNC(grub_dl_unref) (grub_dl_t mod); --extern int EXPORT_FUNC(grub_dl_ref_count) (grub_dl_t mod); -+extern grub_uint64_t EXPORT_FUNC(grub_dl_ref) (grub_dl_t mod); -+extern grub_uint64_t EXPORT_FUNC(grub_dl_unref) (grub_dl_t mod); -+extern grub_uint64_t EXPORT_FUNC(grub_dl_ref_count) (grub_dl_t mod); - - extern grub_dl_t EXPORT_VAR(grub_dl_head); - -diff --git a/util/misc.c b/util/misc.c -index d545212d9..0f928e5b4 100644 ---- a/util/misc.c -+++ b/util/misc.c -@@ -190,14 +190,14 @@ grub_xputs_real (const char *str) - - void (*grub_xputs) (const char *str) = grub_xputs_real; - --int -+grub_uint64_t - grub_dl_ref (grub_dl_t mod) - { - (void) mod; - return 0; - } - --int -+grub_uint64_t - grub_dl_unref (grub_dl_t mod) - { - (void) mod; --- -2.50.1 - diff --git a/boot/grub2/0030-kern-dl-Check-for-the-SHF_INFO_LINK-flag-in-grub_dl_.patch b/boot/grub2/0030-kern-dl-Check-for-the-SHF_INFO_LINK-flag-in-grub_dl_.patch deleted file mode 100644 index 9ca04547d47..00000000000 --- a/boot/grub2/0030-kern-dl-Check-for-the-SHF_INFO_LINK-flag-in-grub_dl_.patch +++ /dev/null @@ -1,46 +0,0 @@ -From 91c2e44d3d29d11b339bec954142521148924ed1 Mon Sep 17 00:00:00 2001 -From: B Horn -Date: Thu, 7 Nov 2024 06:00:36 +0000 -Subject: [PATCH] kern/dl: Check for the SHF_INFO_LINK flag in - grub_dl_relocate_symbols() - -The grub_dl_relocate_symbols() iterates through the sections in -an ELF looking for relocation sections. According to the spec [1] -the SHF_INFO_LINK flag should be set if the sh_info field is meant -to be a section index. - -[1] https://refspecs.linuxbase.org/elf/gabi4+/ch4.sheader.html - -Reported-by: B Horn -Signed-off-by: B Horn -Reviewed-by: Daniel Kiper - -Conflicts: - grub-core/kern/dl.c - -Conflicts: - grub-core/kern/dl.c - -Upstream: 98ad84328dcabfa603dcf5bd217570aa6b4bdd99 -Signed-off-by: Thomas Petazzoni ---- - grub-core/kern/dl.c | 3 +++ - 1 file changed, 3 insertions(+) - -diff --git a/grub-core/kern/dl.c b/grub-core/kern/dl.c -index 1a38742e6..958de3bf1 100644 ---- a/grub-core/kern/dl.c -+++ b/grub-core/kern/dl.c -@@ -599,6 +599,9 @@ grub_dl_relocate_symbols (grub_dl_t mod, void *ehdr) - grub_dl_segment_t seg; - grub_err_t err; - -+ if (!(s->sh_flags & SHF_INFO_LINK)) -+ continue; -+ - /* Find the target segment. */ - for (seg = mod->segment; seg; seg = seg->next) - if (seg->section == s->sh_info) --- -2.50.1 - diff --git a/boot/grub2/0031-commands-extcmd-Missing-check-for-failed-allocation.patch b/boot/grub2/0031-commands-extcmd-Missing-check-for-failed-allocation.patch deleted file mode 100644 index 8a1cdd867dc..00000000000 --- a/boot/grub2/0031-commands-extcmd-Missing-check-for-failed-allocation.patch +++ /dev/null @@ -1,39 +0,0 @@ -From 239a16a303228574f61a82c6fbb041688dff65d0 Mon Sep 17 00:00:00 2001 -From: Lidong Chen -Date: Fri, 22 Nov 2024 06:27:55 +0000 -Subject: [PATCH] commands/extcmd: Missing check for failed allocation - -The grub_extcmd_dispatcher() calls grub_arg_list_alloc() to allocate -a grub_arg_list struct but it does not verify the allocation was successful. -In case of failed allocation the NULL state pointer can be accessed in -parse_option() through grub_arg_parse() which may lead to a security issue. - -Fixes: CVE-2024-45775 - -Reported-by: Nils Langius -Signed-off-by: Lidong Chen -Reviewed-by: Daniel Kiper -Reviewed-by: Alec Brown -Upstream: 05be856a8c3aae41f5df90cab7796ab7ee34b872 -Signed-off-by: Thomas Petazzoni ---- - grub-core/commands/extcmd.c | 3 +++ - 1 file changed, 3 insertions(+) - -diff --git a/grub-core/commands/extcmd.c b/grub-core/commands/extcmd.c -index 90a5ca24a..c236be13a 100644 ---- a/grub-core/commands/extcmd.c -+++ b/grub-core/commands/extcmd.c -@@ -49,6 +49,9 @@ grub_extcmd_dispatcher (struct grub_command *cmd, int argc, char **args, - } - - state = grub_arg_list_alloc (ext, argc, args); -+ if (state == NULL) -+ return grub_errno; -+ - if (grub_arg_parse (ext, argc, args, state, &new_args, &new_argc)) - { - context.state = state; --- -2.50.1 - diff --git a/boot/grub2/0032-commands-ls-Fix-NULL-dereference.patch b/boot/grub2/0032-commands-ls-Fix-NULL-dereference.patch deleted file mode 100644 index 48b03e74f45..00000000000 --- a/boot/grub2/0032-commands-ls-Fix-NULL-dereference.patch +++ /dev/null @@ -1,37 +0,0 @@ -From 322d82364cc0db30b1ae4fc0adfdf7a43adc91ef Mon Sep 17 00:00:00 2001 -From: B Horn -Date: Sun, 12 May 2024 11:08:23 +0100 -Subject: [PATCH] commands/ls: Fix NULL dereference - -The grub_strrchr() may return NULL when the dirname do not contain "/". -This can happen on broken filesystems. - -Reported-by: B Horn -Signed-off-by: B Horn -Reviewed-by: Daniel Kiper -Upstream: 0bf56bce47489c059e50e61a3db7f682d8c44b56 -Signed-off-by: Thomas Petazzoni ---- - grub-core/commands/ls.c | 6 +++++- - 1 file changed, 5 insertions(+), 1 deletion(-) - -diff --git a/grub-core/commands/ls.c b/grub-core/commands/ls.c -index 6a1c7f5d3..f660946a2 100644 ---- a/grub-core/commands/ls.c -+++ b/grub-core/commands/ls.c -@@ -241,7 +241,11 @@ grub_ls_list_files (char *dirname, int longlist, int all, int human) - - grub_file_close (file); - -- p = grub_strrchr (dirname, '/') + 1; -+ p = grub_strrchr (dirname, '/'); -+ if (p == NULL) -+ goto fail; -+ ++p; -+ - ctx.dirname = grub_strndup (dirname, p - dirname); - if (ctx.dirname == NULL) - goto fail; --- -2.50.1 - diff --git a/boot/grub2/0033-commands-pgp-Unregister-the-check_signatures-hooks-o.patch b/boot/grub2/0033-commands-pgp-Unregister-the-check_signatures-hooks-o.patch deleted file mode 100644 index 6bfc0dd7c3a..00000000000 --- a/boot/grub2/0033-commands-pgp-Unregister-the-check_signatures-hooks-o.patch +++ /dev/null @@ -1,36 +0,0 @@ -From c05c4d591ef5f21fefd95fc928fe123a12f2bfb0 Mon Sep 17 00:00:00 2001 -From: B Horn -Date: Fri, 1 Nov 2024 19:24:29 +0000 -Subject: [PATCH] commands/pgp: Unregister the "check_signatures" hooks on - module unload - -If the hooks are not removed they can be called after the module has -been unloaded leading to an use-after-free. - -Fixes: CVE-2025-0622 - -Reported-by: B Horn -Signed-off-by: B Horn -Reviewed-by: Daniel Kiper -Upstream: 2123c5bca7e21fbeb0263df4597ddd7054700726 -Signed-off-by: Thomas Petazzoni ---- - grub-core/commands/pgp.c | 2 ++ - 1 file changed, 2 insertions(+) - -diff --git a/grub-core/commands/pgp.c b/grub-core/commands/pgp.c -index c6766f044..5fadc33c4 100644 ---- a/grub-core/commands/pgp.c -+++ b/grub-core/commands/pgp.c -@@ -1010,6 +1010,8 @@ GRUB_MOD_INIT(pgp) - - GRUB_MOD_FINI(pgp) - { -+ grub_register_variable_hook ("check_signatures", NULL, NULL); -+ grub_env_unset ("check_signatures"); - grub_verifier_unregister (&grub_pubkey_verifier); - grub_unregister_extcmd (cmd); - grub_unregister_extcmd (cmd_trust); --- -2.50.1 - diff --git a/boot/grub2/0034-normal-Remove-variables-hooks-on-module-unload.patch b/boot/grub2/0034-normal-Remove-variables-hooks-on-module-unload.patch deleted file mode 100644 index a2028ad6c05..00000000000 --- a/boot/grub2/0034-normal-Remove-variables-hooks-on-module-unload.patch +++ /dev/null @@ -1,42 +0,0 @@ -From 6290cc499f0fcaa82b3764cf1d9beb2ff27d82a1 Mon Sep 17 00:00:00 2001 -From: B Horn -Date: Fri, 1 Nov 2024 23:46:55 +0000 -Subject: [PATCH] normal: Remove variables hooks on module unload - -The normal module does not entirely cleanup after itself in -its GRUB_MOD_FINI() leaving a few variables hooks in place. -It is not possible to unload normal module now but fix the -issues for completeness. - -On the occasion replace 0s with NULLs for "pager" variable -hooks unregister. - -Fixes: CVE-2025-0622 - -Reported-by: B Horn -Signed-off-by: B Horn -Reviewed-by: Daniel Kiper -Upstream: 9c16197734ada8d0838407eebe081117799bfe67 -Signed-off-by: Thomas Petazzoni ---- - grub-core/normal/main.c | 4 +++- - 1 file changed, 3 insertions(+), 1 deletion(-) - -diff --git a/grub-core/normal/main.c b/grub-core/normal/main.c -index 3b48cd333..5d848c864 100644 ---- a/grub-core/normal/main.c -+++ b/grub-core/normal/main.c -@@ -582,7 +582,9 @@ GRUB_MOD_FINI(normal) - grub_xputs = grub_xputs_saved; - - grub_set_history (0); -- grub_register_variable_hook ("pager", 0, 0); -+ grub_register_variable_hook ("pager", NULL, NULL); -+ grub_register_variable_hook ("color_normal", NULL, NULL); -+ grub_register_variable_hook ("color_highlight", NULL, NULL); - grub_fs_autoload_hook = 0; - grub_unregister_command (cmd_clear); - } --- -2.50.1 - diff --git a/boot/grub2/0035-gettext-Remove-variables-hooks-on-module-unload.patch b/boot/grub2/0035-gettext-Remove-variables-hooks-on-module-unload.patch deleted file mode 100644 index caf9764131f..00000000000 --- a/boot/grub2/0035-gettext-Remove-variables-hooks-on-module-unload.patch +++ /dev/null @@ -1,39 +0,0 @@ -From 69e0cb299c479e01e1c13a032172d29293db8e69 Mon Sep 17 00:00:00 2001 -From: B Horn -Date: Fri, 1 Nov 2024 23:52:06 +0000 -Subject: [PATCH] gettext: Remove variables hooks on module unload - -The gettext module does not entirely cleanup after itself in -its GRUB_MOD_FINI() leaving a few variables hooks in place. -It is not possible to unload gettext module because normal -module depends on it. Though fix the issues for completeness. - -Fixes: CVE-2025-0622 - -Reported-by: B Horn -Signed-off-by: B Horn -Reviewed-by: Daniel Kiper -Upstream: 7580addfc8c94cedb0cdfd7a1fd65b539215e637 -Signed-off-by: Thomas Petazzoni ---- - grub-core/gettext/gettext.c | 4 ++++ - 1 file changed, 4 insertions(+) - -diff --git a/grub-core/gettext/gettext.c b/grub-core/gettext/gettext.c -index 7a1c14e4f..e4f4f8ee6 100644 ---- a/grub-core/gettext/gettext.c -+++ b/grub-core/gettext/gettext.c -@@ -535,6 +535,10 @@ GRUB_MOD_INIT (gettext) - - GRUB_MOD_FINI (gettext) - { -+ grub_register_variable_hook ("locale_dir", NULL, NULL); -+ grub_register_variable_hook ("secondary_locale_dir", NULL, NULL); -+ grub_register_variable_hook ("lang", NULL, NULL); -+ - grub_gettext_delete_list (&main_context); - grub_gettext_delete_list (&secondary_context); - --- -2.50.1 - diff --git a/boot/grub2/0036-gettext-Integer-overflow-leads-to-heap-OOB-write-or-.patch b/boot/grub2/0036-gettext-Integer-overflow-leads-to-heap-OOB-write-or-.patch deleted file mode 100644 index 84d2fd9bc84..00000000000 --- a/boot/grub2/0036-gettext-Integer-overflow-leads-to-heap-OOB-write-or-.patch +++ /dev/null @@ -1,40 +0,0 @@ -From 31b3e24947c6dbb65ea2eca30ddd168dc47513ce Mon Sep 17 00:00:00 2001 -From: Lidong Chen -Date: Fri, 22 Nov 2024 06:27:56 +0000 -Subject: [PATCH] gettext: Integer overflow leads to heap OOB write or read - -Calculation of ctx->grub_gettext_msg_list size in grub_mofile_open() may -overflow leading to subsequent OOB write or read. This patch fixes the -issue by replacing grub_zalloc() and explicit multiplication with -grub_calloc() which does the same thing in safe manner. - -Fixes: CVE-2024-45776 - -Reported-by: Nils Langius -Signed-off-by: Lidong Chen -Reviewed-by: Daniel Kiper -Reviewed-by: Alec Brown -Upstream: 09bd6eb58b0f71ec273916070fa1e2de16897a91 -Signed-off-by: Thomas Petazzoni ---- - grub-core/gettext/gettext.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -diff --git a/grub-core/gettext/gettext.c b/grub-core/gettext/gettext.c -index e4f4f8ee6..63bb1ab73 100644 ---- a/grub-core/gettext/gettext.c -+++ b/grub-core/gettext/gettext.c -@@ -323,8 +323,8 @@ grub_mofile_open (struct grub_gettext_context *ctx, - for (ctx->grub_gettext_max_log = 0; ctx->grub_gettext_max >> ctx->grub_gettext_max_log; - ctx->grub_gettext_max_log++); - -- ctx->grub_gettext_msg_list = grub_zalloc (ctx->grub_gettext_max -- * sizeof (ctx->grub_gettext_msg_list[0])); -+ ctx->grub_gettext_msg_list = grub_calloc (ctx->grub_gettext_max, -+ sizeof (ctx->grub_gettext_msg_list[0])); - if (!ctx->grub_gettext_msg_list) - { - grub_file_close (fd); --- -2.50.1 - diff --git a/boot/grub2/0037-gettext-Integer-overflow-leads-to-heap-OOB-write.patch b/boot/grub2/0037-gettext-Integer-overflow-leads-to-heap-OOB-write.patch deleted file mode 100644 index bb3cfb18138..00000000000 --- a/boot/grub2/0037-gettext-Integer-overflow-leads-to-heap-OOB-write.patch +++ /dev/null @@ -1,58 +0,0 @@ -From dfe673e457e9eb5c7c0c68d8385ba176476de7d7 Mon Sep 17 00:00:00 2001 -From: Lidong Chen -Date: Fri, 22 Nov 2024 06:27:57 +0000 -Subject: [PATCH] gettext: Integer overflow leads to heap OOB write - -The size calculation of the translation buffer in -grub_gettext_getstr_from_position() may overflow -to 0 leading to heap OOB write. This patch fixes -the issue by using grub_add() and checking for -an overflow. - -Fixes: CVE-2024-45777 - -Reported-by: Nils Langius -Signed-off-by: Lidong Chen -Reviewed-by: Daniel Kiper -Reviewed-by: Alec Brown -Upstream: b970a5ed967816bbca8225994cd0ee2557bad515 -Signed-off-by: Thomas Petazzoni ---- - grub-core/gettext/gettext.c | 7 ++++++- - 1 file changed, 6 insertions(+), 1 deletion(-) - -diff --git a/grub-core/gettext/gettext.c b/grub-core/gettext/gettext.c -index 63bb1ab73..9ffc73428 100644 ---- a/grub-core/gettext/gettext.c -+++ b/grub-core/gettext/gettext.c -@@ -26,6 +26,7 @@ - #include - #include - #include -+#include - - GRUB_MOD_LICENSE ("GPLv3+"); - -@@ -99,6 +100,7 @@ grub_gettext_getstr_from_position (struct grub_gettext_context *ctx, - char *translation; - struct string_descriptor desc; - grub_err_t err; -+ grub_size_t alloc_sz; - - internal_position = (off + position * sizeof (desc)); - -@@ -109,7 +111,10 @@ grub_gettext_getstr_from_position (struct grub_gettext_context *ctx, - length = grub_cpu_to_le32 (desc.length); - offset = grub_cpu_to_le32 (desc.offset); - -- translation = grub_malloc (length + 1); -+ if (grub_add (length, 1, &alloc_sz)) -+ return NULL; -+ -+ translation = grub_malloc (alloc_sz); - if (!translation) - return NULL; - --- -2.50.1 - diff --git a/boot/grub2/0038-commands-read-Fix-an-integer-overflow-when-supplying.patch b/boot/grub2/0038-commands-read-Fix-an-integer-overflow-when-supplying.patch deleted file mode 100644 index c3e1d8b5bf2..00000000000 --- a/boot/grub2/0038-commands-read-Fix-an-integer-overflow-when-supplying.patch +++ /dev/null @@ -1,74 +0,0 @@ -From 762eda67c7b0e83011040d5dbcc2ddc9a03b90cd Mon Sep 17 00:00:00 2001 -From: Jonathan Bar Or -Date: Thu, 23 Jan 2025 19:17:05 +0100 -Subject: [PATCH] commands/read: Fix an integer overflow when supplying more - than 2^31 characters - -The grub_getline() function currently has a signed integer variable "i" -that can be overflown when user supplies more than 2^31 characters. -It results in a memory corruption of the allocated line buffer as well -as supplying large negative values to grub_realloc(). - -Fixes: CVE-2025-0690 - -Reported-by: Jonathan Bar Or -Signed-off-by: Jonathan Bar Or -Reviewed-by: Daniel Kiper -Upstream: dad8f502974ed9ad0a70ae6820d17b4b142558fc -Signed-off-by: Thomas Petazzoni ---- - grub-core/commands/read.c | 19 +++++++++++++++---- - 1 file changed, 15 insertions(+), 4 deletions(-) - -diff --git a/grub-core/commands/read.c b/grub-core/commands/read.c -index 597c90706..8d72e45c9 100644 ---- a/grub-core/commands/read.c -+++ b/grub-core/commands/read.c -@@ -25,6 +25,7 @@ - #include - #include - #include -+#include - - GRUB_MOD_LICENSE ("GPLv3+"); - -@@ -37,13 +38,14 @@ static const struct grub_arg_option options[] = - static char * - grub_getline (int silent) - { -- int i; -+ grub_size_t i; - char *line; - char *tmp; - int c; -+ grub_size_t alloc_size; - - i = 0; -- line = grub_malloc (1 + i + sizeof('\0')); -+ line = grub_malloc (1 + sizeof('\0')); - if (! line) - return NULL; - -@@ -59,8 +61,17 @@ grub_getline (int silent) - line[i] = (char) c; - if (!silent) - grub_printf ("%c", c); -- i++; -- tmp = grub_realloc (line, 1 + i + sizeof('\0')); -+ if (grub_add (i, 1, &i)) -+ { -+ grub_error (GRUB_ERR_OUT_OF_RANGE, N_("overflow is detected")); -+ return NULL; -+ } -+ if (grub_add (i, 1 + sizeof('\0'), &alloc_size)) -+ { -+ grub_error (GRUB_ERR_OUT_OF_RANGE, N_("overflow is detected")); -+ return NULL; -+ } -+ tmp = grub_realloc (line, alloc_size); - if (! tmp) - { - grub_free (line); --- -2.50.1 - diff --git a/boot/grub2/0039-commands-test-Stack-overflow-due-to-unlimited-recurs.patch b/boot/grub2/0039-commands-test-Stack-overflow-due-to-unlimited-recurs.patch deleted file mode 100644 index 73675cc3d9b..00000000000 --- a/boot/grub2/0039-commands-test-Stack-overflow-due-to-unlimited-recurs.patch +++ /dev/null @@ -1,88 +0,0 @@ -From 926fe49003b6b46d595d5900893c8ca79710bbd2 Mon Sep 17 00:00:00 2001 -From: Lidong Chen -Date: Mon, 16 Dec 2024 20:22:41 +0000 -Subject: [PATCH] commands/test: Stack overflow due to unlimited recursion - depth - -The test_parse() evaluates test expression recursively. Due to lack of -recursion depth check a specially crafted expression may cause a stack -overflow. The recursion is only triggered by the parentheses usage and -it can be unlimited. However, sensible expressions are unlikely to -contain more than a few parentheses. So, this patch limits the recursion -depth to 100, which should be sufficient. - -Reported-by: Nils Langius -Signed-off-by: Lidong Chen -Reviewed-by: Daniel Kiper -Upstream: c68b7d23628a19da67ebe2e06f84165ee04961af -Signed-off-by: Thomas Petazzoni ---- - grub-core/commands/test.c | 21 ++++++++++++++++++--- - 1 file changed, 18 insertions(+), 3 deletions(-) - -diff --git a/grub-core/commands/test.c b/grub-core/commands/test.c -index 62d3fb398..b585c3d70 100644 ---- a/grub-core/commands/test.c -+++ b/grub-core/commands/test.c -@@ -29,6 +29,9 @@ - - GRUB_MOD_LICENSE ("GPLv3+"); - -+/* Set a limit on recursion to avoid stack overflow. */ -+#define MAX_TEST_RECURSION_DEPTH 100 -+ - /* A simple implementation for signed numbers. */ - static int - grub_strtosl (char *arg, const char ** const end, int base) -@@ -150,7 +153,7 @@ get_fileinfo (char *path, struct test_parse_ctx *ctx) - - /* Parse a test expression starting from *argn. */ - static int --test_parse (char **args, int *argn, int argc) -+test_parse (char **args, int *argn, int argc, int *depth) - { - struct test_parse_ctx ctx = { - .and = 1, -@@ -387,13 +390,24 @@ test_parse (char **args, int *argn, int argc) - if (grub_strcmp (args[*argn], ")") == 0) - { - (*argn)++; -+ if (*depth > 0) -+ (*depth)--; -+ - return ctx.or || ctx.and; - } - /* Recursively invoke if parenthesis. */ - if (grub_strcmp (args[*argn], "(") == 0) - { - (*argn)++; -- update_val (test_parse (args, argn, argc), &ctx); -+ -+ if (++(*depth) > MAX_TEST_RECURSION_DEPTH) -+ { -+ grub_error (GRUB_ERR_OUT_OF_RANGE, N_("max recursion depth exceeded")); -+ depth--; -+ return ctx.or || ctx.and; -+ } -+ -+ update_val (test_parse (args, argn, argc, depth), &ctx); - continue; - } - -@@ -428,11 +442,12 @@ grub_cmd_test (grub_command_t cmd __attribute__ ((unused)), - int argc, char **args) - { - int argn = 0; -+ int depth = 0; - - if (argc >= 1 && grub_strcmp (args[argc - 1], "]") == 0) - argc--; - -- return test_parse (args, &argn, argc) ? GRUB_ERR_NONE -+ return test_parse (args, &argn, argc, &depth) ? GRUB_ERR_NONE - : grub_error (GRUB_ERR_TEST_FAILURE, N_("false")); - } - --- -2.50.1 - diff --git a/boot/grub2/0040-commands-minicmd-Block-the-dump-command-in-lockdown-.patch b/boot/grub2/0040-commands-minicmd-Block-the-dump-command-in-lockdown-.patch deleted file mode 100644 index 23e02cfa1a8..00000000000 --- a/boot/grub2/0040-commands-minicmd-Block-the-dump-command-in-lockdown-.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 2864e6ca7ac492d5215c369a6a52a57c6e602f55 Mon Sep 17 00:00:00 2001 -From: B Horn -Date: Thu, 18 Apr 2024 20:29:39 +0100 -Subject: [PATCH] commands/minicmd: Block the dump command in lockdown mode - -The dump enables a user to read memory which should not be possible -in lockdown mode. - -Fixes: CVE-2025-1118 - -Reported-by: B Horn -Reported-by: Jonathan Bar Or -Signed-off-by: B Horn -Reviewed-by: Daniel Kiper -Upstream: 34824806ac6302f91e8cabaa41308eaced25725f -Signed-off-by: Thomas Petazzoni ---- - grub-core/commands/minicmd.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -diff --git a/grub-core/commands/minicmd.c b/grub-core/commands/minicmd.c -index 286290866..8c5ee3e60 100644 ---- a/grub-core/commands/minicmd.c -+++ b/grub-core/commands/minicmd.c -@@ -203,8 +203,8 @@ GRUB_MOD_INIT(minicmd) - grub_register_command ("help", grub_mini_cmd_help, - 0, N_("Show this message.")); - cmd_dump = -- grub_register_command ("dump", grub_mini_cmd_dump, -- N_("ADDR [SIZE]"), N_("Show memory contents.")); -+ grub_register_command_lockdown ("dump", grub_mini_cmd_dump, -+ N_("ADDR [SIZE]"), N_("Show memory contents.")); - cmd_rmmod = - grub_register_command ("rmmod", grub_mini_cmd_rmmod, - N_("MODULE"), N_("Remove a module.")); --- -2.50.1 - diff --git a/boot/grub2/0041-commands-memrw-Disable-memory-reading-in-lockdown-mo.patch b/boot/grub2/0041-commands-memrw-Disable-memory-reading-in-lockdown-mo.patch deleted file mode 100644 index 968a42f4f96..00000000000 --- a/boot/grub2/0041-commands-memrw-Disable-memory-reading-in-lockdown-mo.patch +++ /dev/null @@ -1,55 +0,0 @@ -From 51c3e37bb23b3ce1919f3ff582cb31fc32a10b4b Mon Sep 17 00:00:00 2001 -From: B Horn -Date: Thu, 18 Apr 2024 20:37:10 +0100 -Subject: [PATCH] commands/memrw: Disable memory reading in lockdown mode - -With the rest of module being blocked in lockdown mode it does not make -a lot of sense to leave memory reading enabled. This also goes in par -with disabling the dump command. - -Reported-by: B Horn -Signed-off-by: B Horn -Reviewed-by: Daniel Kiper -Upstream: 340e4d058f584534f4b90b7dbea2b64a9f8c418c -Signed-off-by: Thomas Petazzoni ---- - grub-core/commands/memrw.c | 21 ++++++++++++--------- - 1 file changed, 12 insertions(+), 9 deletions(-) - -diff --git a/grub-core/commands/memrw.c b/grub-core/commands/memrw.c -index d401a6db0..3542683d1 100644 ---- a/grub-core/commands/memrw.c -+++ b/grub-core/commands/memrw.c -@@ -122,17 +122,20 @@ grub_cmd_write (grub_command_t cmd, int argc, char **argv) - GRUB_MOD_INIT(memrw) - { - cmd_read_byte = -- grub_register_extcmd ("read_byte", grub_cmd_read, 0, -- N_("ADDR"), N_("Read 8-bit value from ADDR."), -- options); -+ grub_register_extcmd_lockdown ("read_byte", grub_cmd_read, 0, -+ N_("ADDR"), -+ N_("Read 8-bit value from ADDR."), -+ options); - cmd_read_word = -- grub_register_extcmd ("read_word", grub_cmd_read, 0, -- N_("ADDR"), N_("Read 16-bit value from ADDR."), -- options); -+ grub_register_extcmd_lockdown ("read_word", grub_cmd_read, 0, -+ N_("ADDR"), -+ N_("Read 16-bit value from ADDR."), -+ options); - cmd_read_dword = -- grub_register_extcmd ("read_dword", grub_cmd_read, 0, -- N_("ADDR"), N_("Read 32-bit value from ADDR."), -- options); -+ grub_register_extcmd_lockdown ("read_dword", grub_cmd_read, 0, -+ N_("ADDR"), -+ N_("Read 32-bit value from ADDR."), -+ options); - cmd_write_byte = - grub_register_command_lockdown ("write_byte", grub_cmd_write, - N_("ADDR VALUE [MASK]"), --- -2.50.1 - diff --git a/boot/grub2/0042-commands-hexdump-Disable-memory-reading-in-lockdown-.patch b/boot/grub2/0042-commands-hexdump-Disable-memory-reading-in-lockdown-.patch deleted file mode 100644 index fcced2b3b85..00000000000 --- a/boot/grub2/0042-commands-hexdump-Disable-memory-reading-in-lockdown-.patch +++ /dev/null @@ -1,42 +0,0 @@ -From d5028a608b21c6fa6ff02e4d84a96ab28034d170 Mon Sep 17 00:00:00 2001 -From: B Horn -Date: Fri, 19 Apr 2024 22:31:45 +0100 -Subject: [PATCH] commands/hexdump: Disable memory reading in lockdown mode - -Reported-by: B Horn -Signed-off-by: B Horn -Reviewed-by: Daniel Kiper -Upstream: 5f31164aed51f498957cdd6ed733ec71a8592c99 -Signed-off-by: Thomas Petazzoni ---- - grub-core/commands/hexdump.c | 7 ++++++- - 1 file changed, 6 insertions(+), 1 deletion(-) - -diff --git a/grub-core/commands/hexdump.c b/grub-core/commands/hexdump.c -index eaa12465b..d6f61d98a 100644 ---- a/grub-core/commands/hexdump.c -+++ b/grub-core/commands/hexdump.c -@@ -24,6 +24,7 @@ - #include - #include - #include -+#include - - GRUB_MOD_LICENSE ("GPLv3+"); - -@@ -51,7 +52,11 @@ grub_cmd_hexdump (grub_extcmd_context_t ctxt, int argc, char **args) - length = (state[1].set) ? grub_strtoul (state[1].arg, 0, 0) : 256; - - if (!grub_strcmp (args[0], "(mem)")) -- hexdump (skip, (char *) (grub_addr_t) skip, length); -+ { -+ if (grub_is_lockdown() == GRUB_LOCKDOWN_ENABLED) -+ return grub_error (GRUB_ERR_ACCESS_DENIED, N_("memory reading is disabled in lockdown mode")); -+ hexdump (skip, (char *) (grub_addr_t) skip, length); -+ } - else if ((args[0][0] == '(') && (args[0][namelen - 1] == ')')) - { - grub_disk_t disk; --- -2.50.1 - diff --git a/boot/grub2/0043-fs-bfs-Disable-under-lockdown.patch b/boot/grub2/0043-fs-bfs-Disable-under-lockdown.patch deleted file mode 100644 index 58a63985cdd..00000000000 --- a/boot/grub2/0043-fs-bfs-Disable-under-lockdown.patch +++ /dev/null @@ -1,57 +0,0 @@ -From 71487b0cf0f7c3fa45f450ed1f3ea4cedd8002a1 Mon Sep 17 00:00:00 2001 -From: Daniel Axtens -Date: Sat, 23 Mar 2024 15:59:43 +1100 -Subject: [PATCH] fs/bfs: Disable under lockdown - -The BFS is not fuzz-clean. Don't allow it to be loaded under lockdown. -This will also disable the AFS. - -Fixes: CVE-2024-45778 -Fixes: CVE-2024-45779 - -Reported-by: Nils Langius -Signed-off-by: Daniel Axtens -Reviewed-by: Daniel Kiper -Upstream: 26db6605036bd9e5b16d9068a8cc75be63b8b630 -Signed-off-by: Thomas Petazzoni ---- - grub-core/fs/bfs.c | 11 ++++++++--- - 1 file changed, 8 insertions(+), 3 deletions(-) - -diff --git a/grub-core/fs/bfs.c b/grub-core/fs/bfs.c -index f37b16895..c92fd7916 100644 ---- a/grub-core/fs/bfs.c -+++ b/grub-core/fs/bfs.c -@@ -30,6 +30,7 @@ - #include - #include - #include -+#include - - GRUB_MOD_LICENSE ("GPLv3+"); - -@@ -1106,8 +1107,11 @@ GRUB_MOD_INIT (bfs) - { - COMPILE_TIME_ASSERT (1 << LOG_EXTENT_SIZE == - sizeof (struct grub_bfs_extent)); -- grub_bfs_fs.mod = mod; -- grub_fs_register (&grub_bfs_fs); -+ if (!grub_is_lockdown ()) -+ { -+ grub_bfs_fs.mod = mod; -+ grub_fs_register (&grub_bfs_fs); -+ } - } - - #ifdef MODE_AFS -@@ -1116,5 +1120,6 @@ GRUB_MOD_FINI (afs) - GRUB_MOD_FINI (bfs) - #endif - { -- grub_fs_unregister (&grub_bfs_fs); -+ if (!grub_is_lockdown ()) -+ grub_fs_unregister (&grub_bfs_fs); - } --- -2.50.1 - diff --git a/boot/grub2/0044-fs-Disable-many-filesystems-under-lockdown.patch b/boot/grub2/0044-fs-Disable-many-filesystems-under-lockdown.patch deleted file mode 100644 index 9120f8c8727..00000000000 --- a/boot/grub2/0044-fs-Disable-many-filesystems-under-lockdown.patch +++ /dev/null @@ -1,396 +0,0 @@ -From f0846530aef66583064a6707430437912dda5fa9 Mon Sep 17 00:00:00 2001 -From: Daniel Axtens -Date: Sat, 23 Mar 2024 16:20:45 +1100 -Subject: [PATCH] fs: Disable many filesystems under lockdown - -The idea is to permit the following: btrfs, cpio, exfat, ext, f2fs, fat, -hfsplus, iso9660, squash4, tar, xfs and zfs. - -The JFS, ReiserFS, romfs, UDF and UFS security vulnerabilities were -reported by Jonathan Bar Or . - -Fixes: CVE-2025-0677 -Fixes: CVE-2025-0684 -Fixes: CVE-2025-0685 -Fixes: CVE-2025-0686 -Fixes: CVE-2025-0689 - -Suggested-by: Daniel Axtens -Signed-off-by: Daniel Axtens -Reviewed-by: Daniel Kiper -Upstream: c4bc55da28543d2522a939ba4ee0acde45f2fa74 -Signed-off-by: Thomas Petazzoni ---- - grub-core/fs/affs.c | 11 ++++++++--- - grub-core/fs/cbfs.c | 11 ++++++++--- - grub-core/fs/jfs.c | 11 ++++++++--- - grub-core/fs/minix.c | 11 ++++++++--- - grub-core/fs/nilfs2.c | 11 ++++++++--- - grub-core/fs/ntfs.c | 11 ++++++++--- - grub-core/fs/reiserfs.c | 11 ++++++++--- - grub-core/fs/romfs.c | 11 ++++++++--- - grub-core/fs/sfs.c | 11 ++++++++--- - grub-core/fs/udf.c | 11 ++++++++--- - grub-core/fs/ufs.c | 11 ++++++++--- - 11 files changed, 88 insertions(+), 33 deletions(-) - -diff --git a/grub-core/fs/affs.c b/grub-core/fs/affs.c -index 9b0afb954..520a001c7 100644 ---- a/grub-core/fs/affs.c -+++ b/grub-core/fs/affs.c -@@ -26,6 +26,7 @@ - #include - #include - #include -+#include - - GRUB_MOD_LICENSE ("GPLv3+"); - -@@ -703,12 +704,16 @@ static struct grub_fs grub_affs_fs = - - GRUB_MOD_INIT(affs) - { -- grub_affs_fs.mod = mod; -- grub_fs_register (&grub_affs_fs); -+ if (!grub_is_lockdown ()) -+ { -+ grub_affs_fs.mod = mod; -+ grub_fs_register (&grub_affs_fs); -+ } - my_mod = mod; - } - - GRUB_MOD_FINI(affs) - { -- grub_fs_unregister (&grub_affs_fs); -+ if (!grub_is_lockdown ()) -+ grub_fs_unregister (&grub_affs_fs); - } -diff --git a/grub-core/fs/cbfs.c b/grub-core/fs/cbfs.c -index 2332745fe..b62c8777c 100644 ---- a/grub-core/fs/cbfs.c -+++ b/grub-core/fs/cbfs.c -@@ -26,6 +26,7 @@ - #include - #include - #include -+#include - - GRUB_MOD_LICENSE ("GPLv3+"); - -@@ -390,13 +391,17 @@ GRUB_MOD_INIT (cbfs) - #if (defined (__i386__) || defined (__x86_64__)) && !defined (GRUB_UTIL) && !defined (GRUB_MACHINE_EMU) && !defined (GRUB_MACHINE_XEN) - init_cbfsdisk (); - #endif -- grub_cbfs_fs.mod = mod; -- grub_fs_register (&grub_cbfs_fs); -+ if (!grub_is_lockdown ()) -+ { -+ grub_cbfs_fs.mod = mod; -+ grub_fs_register (&grub_cbfs_fs); -+ } - } - - GRUB_MOD_FINI (cbfs) - { -- grub_fs_unregister (&grub_cbfs_fs); -+ if (!grub_is_lockdown ()) -+ grub_fs_unregister (&grub_cbfs_fs); - #if (defined (__i386__) || defined (__x86_64__)) && !defined (GRUB_UTIL) && !defined (GRUB_MACHINE_EMU) && !defined (GRUB_MACHINE_XEN) - fini_cbfsdisk (); - #endif -diff --git a/grub-core/fs/jfs.c b/grub-core/fs/jfs.c -index b0283ac00..ab175c7f1 100644 ---- a/grub-core/fs/jfs.c -+++ b/grub-core/fs/jfs.c -@@ -26,6 +26,7 @@ - #include - #include - #include -+#include - - GRUB_MOD_LICENSE ("GPLv3+"); - -@@ -1005,12 +1006,16 @@ static struct grub_fs grub_jfs_fs = - - GRUB_MOD_INIT(jfs) - { -- grub_jfs_fs.mod = mod; -- grub_fs_register (&grub_jfs_fs); -+ if (!grub_is_lockdown ()) -+ { -+ grub_jfs_fs.mod = mod; -+ grub_fs_register (&grub_jfs_fs); -+ } - my_mod = mod; - } - - GRUB_MOD_FINI(jfs) - { -- grub_fs_unregister (&grub_jfs_fs); -+ if (!grub_is_lockdown ()) -+ grub_fs_unregister (&grub_jfs_fs); - } -diff --git a/grub-core/fs/minix.c b/grub-core/fs/minix.c -index b7679c3e2..4440fcca8 100644 ---- a/grub-core/fs/minix.c -+++ b/grub-core/fs/minix.c -@@ -25,6 +25,7 @@ - #include - #include - #include -+#include - - GRUB_MOD_LICENSE ("GPLv3+"); - -@@ -734,8 +735,11 @@ GRUB_MOD_INIT(minix) - #endif - #endif - { -- grub_minix_fs.mod = mod; -- grub_fs_register (&grub_minix_fs); -+ if (!grub_is_lockdown ()) -+ { -+ grub_minix_fs.mod = mod; -+ grub_fs_register (&grub_minix_fs); -+ } - my_mod = mod; - } - -@@ -757,5 +761,6 @@ GRUB_MOD_FINI(minix) - #endif - #endif - { -- grub_fs_unregister (&grub_minix_fs); -+ if (!grub_is_lockdown ()) -+ grub_fs_unregister (&grub_minix_fs); - } -diff --git a/grub-core/fs/nilfs2.c b/grub-core/fs/nilfs2.c -index 4e1e71738..26e6077ff 100644 ---- a/grub-core/fs/nilfs2.c -+++ b/grub-core/fs/nilfs2.c -@@ -34,6 +34,7 @@ - #include - #include - #include -+#include - - GRUB_MOD_LICENSE ("GPLv3+"); - -@@ -1231,12 +1232,16 @@ GRUB_MOD_INIT (nilfs2) - grub_nilfs2_dat_entry)); - COMPILE_TIME_ASSERT (1 << LOG_INODE_SIZE - == sizeof (struct grub_nilfs2_inode)); -- grub_nilfs2_fs.mod = mod; -- grub_fs_register (&grub_nilfs2_fs); -+ if (!grub_is_lockdown ()) -+ { -+ grub_nilfs2_fs.mod = mod; -+ grub_fs_register (&grub_nilfs2_fs); -+ } - my_mod = mod; - } - - GRUB_MOD_FINI (nilfs2) - { -- grub_fs_unregister (&grub_nilfs2_fs); -+ if (!grub_is_lockdown ()) -+ grub_fs_unregister (&grub_nilfs2_fs); - } -diff --git a/grub-core/fs/ntfs.c b/grub-core/fs/ntfs.c -index 560917dc2..bce81947c 100644 ---- a/grub-core/fs/ntfs.c -+++ b/grub-core/fs/ntfs.c -@@ -27,6 +27,7 @@ - #include - #include - #include -+#include - - GRUB_MOD_LICENSE ("GPLv3+"); - -@@ -1320,12 +1321,16 @@ static struct grub_fs grub_ntfs_fs = - - GRUB_MOD_INIT (ntfs) - { -- grub_ntfs_fs.mod = mod; -- grub_fs_register (&grub_ntfs_fs); -+ if (!grub_is_lockdown ()) -+ { -+ grub_ntfs_fs.mod = mod; -+ grub_fs_register (&grub_ntfs_fs); -+ } - my_mod = mod; - } - - GRUB_MOD_FINI (ntfs) - { -- grub_fs_unregister (&grub_ntfs_fs); -+ if (!grub_is_lockdown ()) -+ grub_fs_unregister (&grub_ntfs_fs); - } -diff --git a/grub-core/fs/reiserfs.c b/grub-core/fs/reiserfs.c -index c3850e013..5d3c85950 100644 ---- a/grub-core/fs/reiserfs.c -+++ b/grub-core/fs/reiserfs.c -@@ -39,6 +39,7 @@ - #include - #include - #include -+#include - - GRUB_MOD_LICENSE ("GPLv3+"); - -@@ -1417,12 +1418,16 @@ static struct grub_fs grub_reiserfs_fs = - - GRUB_MOD_INIT(reiserfs) - { -- grub_reiserfs_fs.mod = mod; -- grub_fs_register (&grub_reiserfs_fs); -+ if (!grub_is_lockdown ()) -+ { -+ grub_reiserfs_fs.mod = mod; -+ grub_fs_register (&grub_reiserfs_fs); -+ } - my_mod = mod; - } - - GRUB_MOD_FINI(reiserfs) - { -- grub_fs_unregister (&grub_reiserfs_fs); -+ if (!grub_is_lockdown ()) -+ grub_fs_unregister (&grub_reiserfs_fs); - } -diff --git a/grub-core/fs/romfs.c b/grub-core/fs/romfs.c -index 56b0b2b2f..eafab03b2 100644 ---- a/grub-core/fs/romfs.c -+++ b/grub-core/fs/romfs.c -@@ -23,6 +23,7 @@ - #include - #include - #include -+#include - - GRUB_MOD_LICENSE ("GPLv3+"); - -@@ -475,11 +476,15 @@ static struct grub_fs grub_romfs_fs = - - GRUB_MOD_INIT(romfs) - { -- grub_romfs_fs.mod = mod; -- grub_fs_register (&grub_romfs_fs); -+ if (!grub_is_lockdown ()) -+ { -+ grub_romfs_fs.mod = mod; -+ grub_fs_register (&grub_romfs_fs); -+ } - } - - GRUB_MOD_FINI(romfs) - { -- grub_fs_unregister (&grub_romfs_fs); -+ if (!grub_is_lockdown ()) -+ grub_fs_unregister (&grub_romfs_fs); - } -diff --git a/grub-core/fs/sfs.c b/grub-core/fs/sfs.c -index f0d7cac43..88705b3a2 100644 ---- a/grub-core/fs/sfs.c -+++ b/grub-core/fs/sfs.c -@@ -26,6 +26,7 @@ - #include - #include - #include -+#include - #include - - GRUB_MOD_LICENSE ("GPLv3+"); -@@ -779,12 +780,16 @@ static struct grub_fs grub_sfs_fs = - - GRUB_MOD_INIT(sfs) - { -- grub_sfs_fs.mod = mod; -- grub_fs_register (&grub_sfs_fs); -+ if (!grub_is_lockdown ()) -+ { -+ grub_sfs_fs.mod = mod; -+ grub_fs_register (&grub_sfs_fs); -+ } - my_mod = mod; - } - - GRUB_MOD_FINI(sfs) - { -- grub_fs_unregister (&grub_sfs_fs); -+ if (!grub_is_lockdown ()) -+ grub_fs_unregister (&grub_sfs_fs); - } -diff --git a/grub-core/fs/udf.c b/grub-core/fs/udf.c -index 8765c633c..3d5ee5af5 100644 ---- a/grub-core/fs/udf.c -+++ b/grub-core/fs/udf.c -@@ -27,6 +27,7 @@ - #include - #include - #include -+#include - #include - #include - -@@ -1455,12 +1456,16 @@ static struct grub_fs grub_udf_fs = { - - GRUB_MOD_INIT (udf) - { -- grub_udf_fs.mod = mod; -- grub_fs_register (&grub_udf_fs); -+ if (!grub_is_lockdown ()) -+ { -+ grub_udf_fs.mod = mod; -+ grub_fs_register (&grub_udf_fs); -+ } - my_mod = mod; - } - - GRUB_MOD_FINI (udf) - { -- grub_fs_unregister (&grub_udf_fs); -+ if (!grub_is_lockdown ()) -+ grub_fs_unregister (&grub_udf_fs); - } -diff --git a/grub-core/fs/ufs.c b/grub-core/fs/ufs.c -index e82d9356d..8b5adbd48 100644 ---- a/grub-core/fs/ufs.c -+++ b/grub-core/fs/ufs.c -@@ -25,6 +25,7 @@ - #include - #include - #include -+#include - - GRUB_MOD_LICENSE ("GPLv3+"); - -@@ -899,8 +900,11 @@ GRUB_MOD_INIT(ufs1) - #endif - #endif - { -- grub_ufs_fs.mod = mod; -- grub_fs_register (&grub_ufs_fs); -+ if (!grub_is_lockdown ()) -+ { -+ grub_ufs_fs.mod = mod; -+ grub_fs_register (&grub_ufs_fs); -+ } - my_mod = mod; - } - -@@ -914,6 +918,7 @@ GRUB_MOD_FINI(ufs1) - #endif - #endif - { -- grub_fs_unregister (&grub_ufs_fs); -+ if (!grub_is_lockdown ()) -+ grub_fs_unregister (&grub_ufs_fs); - } - --- -2.50.1 - diff --git a/boot/grub2/0045-disk-Use-safe-math-macros-to-prevent-overflows.patch b/boot/grub2/0045-disk-Use-safe-math-macros-to-prevent-overflows.patch deleted file mode 100644 index 3ddd168ad5e..00000000000 --- a/boot/grub2/0045-disk-Use-safe-math-macros-to-prevent-overflows.patch +++ /dev/null @@ -1,551 +0,0 @@ -From b6bdea00ea1a3d6b0b7551133279cbc7ff23bdf6 Mon Sep 17 00:00:00 2001 -From: Alec Brown -Date: Wed, 22 Jan 2025 02:55:09 +0000 -Subject: [PATCH] disk: Use safe math macros to prevent overflows - -Replace direct arithmetic operations with macros from include/grub/safemath.h -to prevent potential overflow issues when calculating the memory sizes. - -Signed-off-by: Alec Brown -Reviewed-by: Daniel Kiper - -Conflicts: - grub-core/disk/cryptodisk.c - -Upstream: c407724dad6c3e2fc1571e57adbda71cc03f82aa -Signed-off-by: Thomas Petazzoni ---- - grub-core/disk/cryptodisk.c | 36 ++++++++++++++----- - grub-core/disk/diskfilter.c | 9 +++-- - grub-core/disk/ieee1275/obdisk.c | 43 +++++++++++++++++++---- - grub-core/disk/ieee1275/ofdisk.c | 59 +++++++++++++++++++++++++++----- - grub-core/disk/ldm.c | 36 ++++++++++++++++--- - grub-core/disk/luks2.c | 7 +++- - grub-core/disk/memdisk.c | 7 +++- - grub-core/disk/plainmount.c | 9 +++-- - 8 files changed, 172 insertions(+), 34 deletions(-) - -diff --git a/grub-core/disk/cryptodisk.c b/grub-core/disk/cryptodisk.c -index 2246af51b..6f7445665 100644 ---- a/grub-core/disk/cryptodisk.c -+++ b/grub-core/disk/cryptodisk.c -@@ -26,6 +26,7 @@ - #include - #include - #include -+#include - - #ifdef GRUB_UTIL - #include -@@ -1473,7 +1474,7 @@ static char * - luks_script_get (grub_size_t *sz) - { - grub_cryptodisk_t i; -- grub_size_t size = 0; -+ grub_size_t size = 0, mul; - char *ptr, *ret; - - *sz = 0; -@@ -1482,10 +1483,6 @@ luks_script_get (grub_size_t *sz) - if (grub_strcmp (i->modname, "luks") == 0 || - grub_strcmp (i->modname, "luks2") == 0) - { -- size += grub_strlen (i->modname); -- size += sizeof ("_mount"); -- size += grub_strlen (i->uuid); -- size += grub_strlen (i->cipher->cipher->name); - /* - * Add space in the line for (in order) spaces, cipher mode, cipher IV - * mode, sector offset, sector size and the trailing newline. This is -@@ -1493,14 +1490,35 @@ luks_script_get (grub_size_t *sz) - * in an earlier version of this code that are unaccounted for. It is - * left in the calculations in case it is needed. At worst, its short- - * lived wasted space. -+ * -+ * 60 = 5 + 5 + 8 + 20 + 6 + 1 + 15 - */ -- size += 5 + 5 + 8 + 20 + 6 + 1 + 15; -+ if (grub_add (size, grub_strlen (i->modname), &size) || -+ grub_add (size, sizeof ("_mount") + 60, &size) || -+ grub_add (size, grub_strlen (i->uuid), &size) || -+ grub_add (size, grub_strlen (i->cipher->cipher->name), &size) || -+ grub_mul (i->keysize, 2, &mul) || -+ grub_add (size, mul, &size)) -+ { -+ grub_error (GRUB_ERR_OUT_OF_RANGE, "overflow detected while obtaining size of luks script"); -+ return 0; -+ } - if (i->essiv_hash) -- size += grub_strlen (i->essiv_hash->name); -- size += i->keysize * 2; -+ { -+ if (grub_add (size, grub_strlen (i->essiv_hash->name), &size)) -+ { -+ grub_error (GRUB_ERR_OUT_OF_RANGE, "overflow detected while obtaining size of luks script"); -+ return 0; -+ } -+ } - } -+ if (grub_add (size, 1, &size)) -+ { -+ grub_error (GRUB_ERR_OUT_OF_RANGE, "overflow detected while obtaining size of luks script"); -+ return 0; -+ } - -- ret = grub_malloc (size + 1); -+ ret = grub_malloc (size); - if (!ret) - return 0; - -diff --git a/grub-core/disk/diskfilter.c b/grub-core/disk/diskfilter.c -index 21e239511..de5a564d4 100644 ---- a/grub-core/disk/diskfilter.c -+++ b/grub-core/disk/diskfilter.c -@@ -24,6 +24,7 @@ - #include - #include - #include -+#include - #ifdef GRUB_UTIL - #include - #include -@@ -1039,7 +1040,7 @@ grub_diskfilter_make_raid (grub_size_t uuidlen, char *uuid, int nmemb, - { - struct grub_diskfilter_vg *array; - int i; -- grub_size_t j; -+ grub_size_t j, sz; - grub_uint64_t totsize; - struct grub_diskfilter_pv *pv; - grub_err_t err; -@@ -1140,7 +1141,11 @@ grub_diskfilter_make_raid (grub_size_t uuidlen, char *uuid, int nmemb, - } - array->lvs->vg = array; - -- array->lvs->idname = grub_malloc (sizeof ("mduuid/") + 2 * uuidlen); -+ if (grub_mul (uuidlen, 2, &sz) || -+ grub_add (sz, sizeof ("mduuid/"), &sz)) -+ goto fail; -+ -+ array->lvs->idname = grub_malloc (sz); - if (!array->lvs->idname) - goto fail; - -diff --git a/grub-core/disk/ieee1275/obdisk.c b/grub-core/disk/ieee1275/obdisk.c -index cd923b90f..9d4c42665 100644 ---- a/grub-core/disk/ieee1275/obdisk.c -+++ b/grub-core/disk/ieee1275/obdisk.c -@@ -26,6 +26,7 @@ - #include - #include - #include -+#include - #include - #include - -@@ -128,9 +129,17 @@ count_commas (const char *src) - static char * - decode_grub_devname (const char *name) - { -- char *devpath = grub_malloc (grub_strlen (name) + 1); -+ char *devpath; - char *p, c; -+ grub_size_t sz; - -+ if (grub_add (grub_strlen (name), 1, &sz)) -+ { -+ grub_error (GRUB_ERR_OUT_OF_RANGE, N_("overflow detected while obtaining size of device name")); -+ return NULL; -+ } -+ -+ devpath = grub_malloc (sz); - if (devpath == NULL) - return NULL; - -@@ -156,12 +165,20 @@ static char * - encode_grub_devname (const char *path) - { - char *encoding, *optr; -+ grub_size_t sz; - - if (path == NULL) - return NULL; - -- encoding = grub_malloc (sizeof (IEEE1275_DEV) + count_commas (path) + -- grub_strlen (path) + 1); -+ if (grub_add (sizeof (IEEE1275_DEV) + 1, count_commas (path), &sz) || -+ grub_add (sz, grub_strlen (path), &sz)) -+ { -+ grub_error (GRUB_ERR_OUT_OF_RANGE, N_("overflow detected while obtaining encoding size")); -+ grub_print_error (); -+ return NULL; -+ } -+ -+ encoding = grub_malloc (sz); - - if (encoding == NULL) - { -@@ -396,6 +413,14 @@ canonicalise_disk (const char *devname) - - real_unit_str_len = grub_strlen (op->name) + sizeof (IEEE1275_DISK_ALIAS) - + grub_strlen (real_unit_address); -+ if (grub_add (grub_strlen (op->name), sizeof (IEEE1275_DISK_ALIAS), &real_unit_str_len) || -+ grub_add (real_unit_str_len, grub_strlen (real_unit_address), &real_unit_str_len)) -+ { -+ grub_free (parent); -+ grub_error (GRUB_ERR_OUT_OF_RANGE, N_("overflow detected while obtaining size of canonical name")); -+ grub_print_error (); -+ return NULL; -+ } - - real_canon = grub_malloc (real_unit_str_len); - -@@ -413,6 +438,7 @@ canonicalise_disk (const char *devname) - static struct disk_dev * - add_canon_disk (const char *cname) - { -+ grub_size_t sz; - struct disk_dev *dev; - - dev = grub_zalloc (sizeof (struct disk_dev)); -@@ -428,13 +454,18 @@ add_canon_disk (const char *cname) - * arguments and allows a client program to open - * the entire (raw) disk. Any disk label is ignored. - */ -- dev->raw_name = grub_malloc (grub_strlen (cname) + sizeof (":nolabel")); -+ if (grub_add (grub_strlen (cname), sizeof (":nolabel"), &sz)) -+ { -+ grub_error (GRUB_ERR_OUT_OF_RANGE, "overflow detected while appending :nolabel to end of canonical name"); -+ goto failed; -+ } -+ -+ dev->raw_name = grub_malloc (sz); - - if (dev->raw_name == NULL) - goto failed; - -- grub_snprintf (dev->raw_name, grub_strlen (cname) + sizeof (":nolabel"), -- "%s:nolabel", cname); -+ grub_snprintf (dev->raw_name, sz, "%s:nolabel", cname); - } - - /* -diff --git a/grub-core/disk/ieee1275/ofdisk.c b/grub-core/disk/ieee1275/ofdisk.c -index c6cba0c8a..4c5b89cbc 100644 ---- a/grub-core/disk/ieee1275/ofdisk.c -+++ b/grub-core/disk/ieee1275/ofdisk.c -@@ -24,6 +24,7 @@ - #include - #include - #include -+#include - - static char *last_devpath; - static grub_ieee1275_ihandle_t last_ihandle; -@@ -80,6 +81,7 @@ ofdisk_hash_add_real (char *devpath) - struct ofdisk_hash_ent **head = &ofdisk_hash[ofdisk_hash_fn(devpath)]; - const char *iptr; - char *optr; -+ grub_size_t sz; - - p = grub_zalloc (sizeof (*p)); - if (!p) -@@ -87,8 +89,14 @@ ofdisk_hash_add_real (char *devpath) - - p->devpath = devpath; - -- p->grub_devpath = grub_malloc (sizeof ("ieee1275/") -- + 2 * grub_strlen (p->devpath)); -+ if (grub_mul (grub_strlen (p->devpath), 2, &sz) || -+ grub_add (sz, sizeof ("ieee1275/"), &sz)) -+ { -+ grub_error (GRUB_ERR_OUT_OF_RANGE, N_("overflow detected while obtaining size of device path")); -+ return NULL; -+ } -+ -+ p->grub_devpath = grub_malloc (sz); - - if (!p->grub_devpath) - { -@@ -98,7 +106,13 @@ ofdisk_hash_add_real (char *devpath) - - if (! grub_ieee1275_test_flag (GRUB_IEEE1275_FLAG_NO_PARTITION_0)) - { -- p->open_path = grub_malloc (grub_strlen (p->devpath) + 3); -+ if (grub_add (grub_strlen (p->devpath), 3, &sz)) -+ { -+ grub_error (GRUB_ERR_OUT_OF_RANGE, N_("overflow detected while obtaining size of an open path")); -+ return NULL; -+ } -+ -+ p->open_path = grub_malloc (sz); - if (!p->open_path) - { - grub_free (p->grub_devpath); -@@ -224,6 +238,7 @@ dev_iterate (const struct grub_ieee1275_devalias *alias) - args; - char *buf, *bufptr; - unsigned i; -+ grub_size_t sz; - - if (grub_ieee1275_open (alias->path, &ihandle)) - return; -@@ -243,7 +258,14 @@ dev_iterate (const struct grub_ieee1275_devalias *alias) - return; - } - -- buf = grub_malloc (grub_strlen (alias->path) + 32); -+ if (grub_add (grub_strlen (alias->path), 32, &sz)) -+ { -+ grub_error (GRUB_ERR_OUT_OF_RANGE, "overflow detected while creating buffer for vscsi"); -+ grub_ieee1275_close (ihandle); -+ return; -+ } -+ -+ buf = grub_malloc (sz); - if (!buf) - return; - bufptr = grub_stpcpy (buf, alias->path); -@@ -287,9 +309,15 @@ dev_iterate (const struct grub_ieee1275_devalias *alias) - grub_uint64_t *table; - grub_uint16_t table_size; - grub_ieee1275_ihandle_t ihandle; -+ grub_size_t sz; - -- buf = grub_malloc (grub_strlen (alias->path) + -- sizeof ("/disk@7766554433221100")); -+ if (grub_add (grub_strlen (alias->path), sizeof ("/disk@7766554433221100"), &sz)) -+ { -+ grub_error (GRUB_ERR_OUT_OF_RANGE, "overflow detected while creating buffer for sas_ioa"); -+ return; -+ } -+ -+ buf = grub_malloc (sz); - if (!buf) - return; - bufptr = grub_stpcpy (buf, alias->path); -@@ -427,9 +455,17 @@ grub_ofdisk_iterate (grub_disk_dev_iterate_hook_t hook, void *hook_data, - static char * - compute_dev_path (const char *name) - { -- char *devpath = grub_malloc (grub_strlen (name) + 3); -+ char *devpath; - char *p, c; -+ grub_size_t sz; - -+ if (grub_add (grub_strlen (name), 3, &sz)) -+ { -+ grub_error (GRUB_ERR_OUT_OF_RANGE, N_("overflow detected while obtaining size of device path")); -+ return NULL; -+ } -+ -+ devpath = grub_malloc (sz); - if (!devpath) - return NULL; - -@@ -625,6 +661,7 @@ insert_bootpath (void) - char *bootpath; - grub_ssize_t bootpath_size; - char *type; -+ grub_size_t sz; - - if (grub_ieee1275_get_property_length (grub_ieee1275_chosen, "bootpath", - &bootpath_size) -@@ -635,7 +672,13 @@ insert_bootpath (void) - return; - } - -- bootpath = (char *) grub_malloc ((grub_size_t) bootpath_size + 64); -+ if (grub_add (bootpath_size, 64, &sz)) -+ { -+ grub_error (GRUB_ERR_OUT_OF_RANGE, N_("overflow detected while obtaining bootpath size")); -+ return; -+ } -+ -+ bootpath = (char *) grub_malloc (sz); - if (! bootpath) - { - grub_print_error (); -diff --git a/grub-core/disk/ldm.c b/grub-core/disk/ldm.c -index 34bfe6bd1..4101b15d8 100644 ---- a/grub-core/disk/ldm.c -+++ b/grub-core/disk/ldm.c -@@ -220,6 +220,7 @@ make_vg (grub_disk_t disk, - struct grub_ldm_vblk vblk[GRUB_DISK_SECTOR_SIZE - / sizeof (struct grub_ldm_vblk)]; - unsigned i; -+ grub_size_t sz; - err = grub_disk_read (disk, cursec, 0, - sizeof(vblk), &vblk); - if (err) -@@ -251,7 +252,13 @@ make_vg (grub_disk_t disk, - grub_free (pv); - goto fail2; - } -- pv->internal_id = grub_malloc (ptr[0] + 2); -+ if (grub_add (ptr[0], 2, &sz)) -+ { -+ grub_free (pv); -+ goto fail2; -+ } -+ -+ pv->internal_id = grub_malloc (sz); - if (!pv->internal_id) - { - grub_free (pv); -@@ -276,7 +283,15 @@ make_vg (grub_disk_t disk, - goto fail2; - } - pv->id.uuidlen = *ptr; -- pv->id.uuid = grub_malloc (pv->id.uuidlen + 1); -+ -+ if (grub_add (pv->id.uuidlen, 1, &sz)) -+ { -+ grub_free (pv->internal_id); -+ grub_free (pv); -+ goto fail2; -+ } -+ -+ pv->id.uuid = grub_malloc (sz); - grub_memcpy (pv->id.uuid, ptr + 1, pv->id.uuidlen); - pv->id.uuid[pv->id.uuidlen] = 0; - -@@ -343,7 +358,13 @@ make_vg (grub_disk_t disk, - grub_free (lv); - goto fail2; - } -- lv->internal_id = grub_malloc ((grub_size_t) ptr[0] + 2); -+ if (grub_add (ptr[0], 2, &sz)) -+ { -+ grub_free (lv->segments); -+ grub_free (lv); -+ goto fail2; -+ } -+ lv->internal_id = grub_malloc (sz); - if (!lv->internal_id) - { - grub_free (lv); -@@ -455,6 +476,7 @@ make_vg (grub_disk_t disk, - struct grub_ldm_vblk vblk[GRUB_DISK_SECTOR_SIZE - / sizeof (struct grub_ldm_vblk)]; - unsigned i; -+ grub_size_t sz; - err = grub_disk_read (disk, cursec, 0, - sizeof(vblk), &vblk); - if (err) -@@ -490,7 +512,12 @@ make_vg (grub_disk_t disk, - grub_free (comp); - goto fail2; - } -- comp->internal_id = grub_malloc ((grub_size_t) ptr[0] + 2); -+ if (grub_add (ptr[0], 2, &sz)) -+ { -+ grub_free (comp); -+ goto fail2; -+ } -+ comp->internal_id = grub_malloc (sz); - if (!comp->internal_id) - { - grub_free (comp); -@@ -640,7 +667,6 @@ make_vg (grub_disk_t disk, - if (lv->segments->node_alloc == lv->segments->node_count) - { - void *t; -- grub_size_t sz; - - if (grub_mul (lv->segments->node_alloc, 2, &lv->segments->node_alloc) || - grub_mul (lv->segments->node_alloc, sizeof (*lv->segments->nodes), &sz)) -diff --git a/grub-core/disk/luks2.c b/grub-core/disk/luks2.c -index d5106402f..8036d76ff 100644 ---- a/grub-core/disk/luks2.c -+++ b/grub-core/disk/luks2.c -@@ -26,6 +26,7 @@ - #include - #include - #include -+#include - - #include - #include -@@ -569,6 +570,7 @@ luks2_recover_key (grub_disk_t source, - gcry_err_code_t gcry_ret; - grub_json_t *json = NULL, keyslots; - grub_err_t ret; -+ grub_size_t sz; - - if (cargs->key_data == NULL || cargs->key_len == 0) - return grub_error (GRUB_ERR_BAD_ARGUMENT, "no key data"); -@@ -577,7 +579,10 @@ luks2_recover_key (grub_disk_t source, - if (ret) - return ret; - -- json_header = grub_zalloc (grub_be_to_cpu64 (header.hdr_size) - sizeof (header)); -+ if (grub_sub (grub_be_to_cpu64 (header.hdr_size), sizeof (header), &sz)) -+ return grub_error (GRUB_ERR_OUT_OF_RANGE, "underflow detected while calculating json header size"); -+ -+ json_header = grub_zalloc (sz); - if (!json_header) - return GRUB_ERR_OUT_OF_MEMORY; - -diff --git a/grub-core/disk/memdisk.c b/grub-core/disk/memdisk.c -index 613779cf3..36de3bfab 100644 ---- a/grub-core/disk/memdisk.c -+++ b/grub-core/disk/memdisk.c -@@ -23,6 +23,7 @@ - #include - #include - #include -+#include - - GRUB_MOD_LICENSE ("GPLv3+"); - -@@ -96,7 +97,11 @@ GRUB_MOD_INIT(memdisk) - - grub_dprintf ("memdisk", "Found memdisk image at %p\n", memdisk_orig_addr); - -- memdisk_size = header->size - sizeof (struct grub_module_header); -+ if (grub_sub (header->size, sizeof (struct grub_module_header), &memdisk_size)) -+ { -+ grub_error (GRUB_ERR_OUT_OF_RANGE, "underflow detected while obtaining memdisk size"); -+ return; -+ } - memdisk_addr = grub_malloc (memdisk_size); - - grub_dprintf ("memdisk", "Copying memdisk image to dynamic memory\n"); -diff --git a/grub-core/disk/plainmount.c b/grub-core/disk/plainmount.c -index 47e64805f..21ec4072c 100644 ---- a/grub-core/disk/plainmount.c -+++ b/grub-core/disk/plainmount.c -@@ -24,6 +24,7 @@ - #include - #include - #include -+#include - - GRUB_MOD_LICENSE ("GPLv3+"); - -@@ -126,7 +127,7 @@ plainmount_configure_password (grub_cryptodisk_t dev, const char *hash, - grub_uint8_t *derived_hash, *dh; - char *p; - unsigned int round, i, len, size; -- grub_size_t alloc_size; -+ grub_size_t alloc_size, sz; - grub_err_t err = GRUB_ERR_NONE; - - /* Support none (plain) hash */ -@@ -145,7 +146,11 @@ plainmount_configure_password (grub_cryptodisk_t dev, const char *hash, - * Allocate buffer for the password and for an added prefix character - * for each hash round ('alloc_size' may not be a multiple of 'len'). - */ -- p = grub_zalloc (alloc_size + (alloc_size / len) + 1); -+ if (grub_add (alloc_size, (alloc_size / len), &sz) || -+ grub_add (sz, 1, &sz)) -+ return grub_error (GRUB_ERR_OUT_OF_RANGE, N_("overflow detected while allocating size of password buffer")); -+ -+ p = grub_zalloc (sz); - derived_hash = grub_zalloc (GRUB_CRYPTODISK_MAX_KEYLEN * 2); - if (p == NULL || derived_hash == NULL) - { --- -2.50.1 - diff --git a/boot/grub2/0046-disk-Prevent-overflows-when-allocating-memory-for-ar.patch b/boot/grub2/0046-disk-Prevent-overflows-when-allocating-memory-for-ar.patch deleted file mode 100644 index 1c1cb0ee3a8..00000000000 --- a/boot/grub2/0046-disk-Prevent-overflows-when-allocating-memory-for-ar.patch +++ /dev/null @@ -1,47 +0,0 @@ -From d9f900247eb886176aace7888be941348a9c8fc8 Mon Sep 17 00:00:00 2001 -From: Alec Brown -Date: Wed, 22 Jan 2025 02:55:10 +0000 -Subject: [PATCH] disk: Prevent overflows when allocating memory for arrays - -Use grub_calloc() when allocating memory for arrays to ensure proper -overflow checks are in place. - -Signed-off-by: Alec Brown -Reviewed-by: Daniel Kiper - -Conflicts: - grub-core/disk/cryptodisk.c - -Upstream: d8151f98331ee4d15fcca59edffa59246d8fc15f -Signed-off-by: Thomas Petazzoni ---- - grub-core/disk/lvm.c | 6 ++---- - 1 file changed, 2 insertions(+), 4 deletions(-) - -diff --git a/grub-core/disk/lvm.c b/grub-core/disk/lvm.c -index 794248540..a395b200d 100644 ---- a/grub-core/disk/lvm.c -+++ b/grub-core/disk/lvm.c -@@ -671,8 +671,7 @@ grub_lvm_detect (grub_disk_t disk, - goto lvs_segment_fail; - } - -- seg->nodes = grub_zalloc (sizeof (seg->nodes[0]) -- * seg->node_count); -+ seg->nodes = grub_calloc (seg->node_count, sizeof (seg->nodes[0])); - - p = grub_strstr (p, "mirrors = ["); - if (p == NULL) -@@ -760,8 +759,7 @@ grub_lvm_detect (grub_disk_t disk, - } - } - -- seg->nodes = grub_zalloc (sizeof (seg->nodes[0]) -- * seg->node_count); -+ seg->nodes = grub_calloc (seg->node_count, sizeof (seg->nodes[0])); - - p = grub_strstr (p, "raids = ["); - if (p == NULL) --- -2.50.1 - diff --git a/boot/grub2/0047-disk-Check-if-returned-pointer-for-allocated-memory-.patch b/boot/grub2/0047-disk-Check-if-returned-pointer-for-allocated-memory-.patch deleted file mode 100644 index f00d37d9774..00000000000 --- a/boot/grub2/0047-disk-Check-if-returned-pointer-for-allocated-memory-.patch +++ /dev/null @@ -1,157 +0,0 @@ -From 04621aac0412b99323fda050074d4e77c00bc8e8 Mon Sep 17 00:00:00 2001 -From: Alec Brown -Date: Wed, 22 Jan 2025 02:55:11 +0000 -Subject: [PATCH] disk: Check if returned pointer for allocated memory is NULL - -When using grub_malloc(), grub_zalloc() or grub_calloc(), these functions can -fail if we are out of memory. After allocating memory we should check if these -functions returned NULL and handle this error if they did. - -On the occasion make a NULL check in ATA code more obvious. - -Signed-off-by: Alec Brown -Reviewed-by: Daniel Kiper -Upstream: 33bd6b5ac5c77b346769ab5284262f94e695e464 -Signed-off-by: Thomas Petazzoni ---- - grub-core/disk/ata.c | 4 ++-- - grub-core/disk/ieee1275/obdisk.c | 6 ++++++ - grub-core/disk/ldm.c | 6 ++++++ - grub-core/disk/lvm.c | 14 ++++++++++++++ - grub-core/disk/memdisk.c | 2 ++ - 5 files changed, 30 insertions(+), 2 deletions(-) - -diff --git a/grub-core/disk/ata.c b/grub-core/disk/ata.c -index 7b6ac7bfc..a2433e29e 100644 ---- a/grub-core/disk/ata.c -+++ b/grub-core/disk/ata.c -@@ -112,10 +112,10 @@ grub_ata_identify (struct grub_ata *dev) - return grub_atapi_identify (dev); - - info64 = grub_malloc (GRUB_DISK_SECTOR_SIZE); -+ if (info64 == NULL) -+ return grub_errno; - info32 = (grub_uint32_t *) info64; - info16 = (grub_uint16_t *) info64; -- if (! info16) -- return grub_errno; - - grub_memset (&parms, 0, sizeof (parms)); - parms.buffer = info16; -diff --git a/grub-core/disk/ieee1275/obdisk.c b/grub-core/disk/ieee1275/obdisk.c -index 9d4c42665..fcc39e0a2 100644 ---- a/grub-core/disk/ieee1275/obdisk.c -+++ b/grub-core/disk/ieee1275/obdisk.c -@@ -423,6 +423,12 @@ canonicalise_disk (const char *devname) - } - - real_canon = grub_malloc (real_unit_str_len); -+ if (real_canon == NULL) -+ { -+ grub_free (parent); -+ grub_print_error (); -+ return NULL; -+ } - - grub_snprintf (real_canon, real_unit_str_len, "%s/disk@%s", - op->name, real_unit_address); -diff --git a/grub-core/disk/ldm.c b/grub-core/disk/ldm.c -index 4101b15d8..048e29cd0 100644 ---- a/grub-core/disk/ldm.c -+++ b/grub-core/disk/ldm.c -@@ -292,6 +292,12 @@ make_vg (grub_disk_t disk, - } - - pv->id.uuid = grub_malloc (sz); -+ if (pv->id.uuid == NULL) -+ { -+ grub_free (pv->internal_id); -+ grub_free (pv); -+ goto fail2; -+ } - grub_memcpy (pv->id.uuid, ptr + 1, pv->id.uuidlen); - pv->id.uuid[pv->id.uuidlen] = 0; - -diff --git a/grub-core/disk/lvm.c b/grub-core/disk/lvm.c -index a395b200d..b2dff76d1 100644 ---- a/grub-core/disk/lvm.c -+++ b/grub-core/disk/lvm.c -@@ -370,6 +370,8 @@ grub_lvm_detect (grub_disk_t disk, - break; - - pv = grub_zalloc (sizeof (*pv)); -+ if (pv == NULL) -+ goto fail4; - q = p; - while (*q != ' ' && q < mda_end) - q++; -@@ -379,6 +381,8 @@ grub_lvm_detect (grub_disk_t disk, - - s = q - p; - pv->name = grub_malloc (s + 1); -+ if (pv->name == NULL) -+ goto pvs_fail_noname; - grub_memcpy (pv->name, p, s); - pv->name[s] = '\0'; - -@@ -451,6 +455,8 @@ grub_lvm_detect (grub_disk_t disk, - break; - - lv = grub_zalloc (sizeof (*lv)); -+ if (lv == NULL) -+ goto fail4; - - q = p; - while (*q != ' ' && q < mda_end) -@@ -545,6 +551,8 @@ grub_lvm_detect (grub_disk_t disk, - goto lvs_fail; - } - lv->segments = grub_calloc (lv->segment_count, sizeof (*seg)); -+ if (lv->segments == NULL) -+ goto lvs_fail; - seg = lv->segments; - - for (i = 0; i < lv->segment_count; i++) -@@ -612,6 +620,8 @@ grub_lvm_detect (grub_disk_t disk, - - seg->nodes = grub_calloc (seg->node_count, - sizeof (*stripe)); -+ if (seg->nodes == NULL) -+ goto lvs_segment_fail; - stripe = seg->nodes; - - p = grub_strstr (p, "stripes = ["); -@@ -672,6 +682,8 @@ grub_lvm_detect (grub_disk_t disk, - } - - seg->nodes = grub_calloc (seg->node_count, sizeof (seg->nodes[0])); -+ if (seg->nodes == NULL) -+ goto lvs_segment_fail; - - p = grub_strstr (p, "mirrors = ["); - if (p == NULL) -@@ -760,6 +772,8 @@ grub_lvm_detect (grub_disk_t disk, - } - - seg->nodes = grub_calloc (seg->node_count, sizeof (seg->nodes[0])); -+ if (seg->nodes == NULL) -+ goto lvs_segment_fail; - - p = grub_strstr (p, "raids = ["); - if (p == NULL) -diff --git a/grub-core/disk/memdisk.c b/grub-core/disk/memdisk.c -index 36de3bfab..2d7afaea3 100644 ---- a/grub-core/disk/memdisk.c -+++ b/grub-core/disk/memdisk.c -@@ -103,6 +103,8 @@ GRUB_MOD_INIT(memdisk) - return; - } - memdisk_addr = grub_malloc (memdisk_size); -+ if (memdisk_addr == NULL) -+ return; - - grub_dprintf ("memdisk", "Copying memdisk image to dynamic memory\n"); - grub_memmove (memdisk_addr, memdisk_orig_addr, memdisk_size); --- -2.50.1 - diff --git a/boot/grub2/0048-disk-ieee1275-ofdisk-Call-grub_ieee1275_close-when-g.patch b/boot/grub2/0048-disk-ieee1275-ofdisk-Call-grub_ieee1275_close-when-g.patch deleted file mode 100644 index fd0ddda6745..00000000000 --- a/boot/grub2/0048-disk-ieee1275-ofdisk-Call-grub_ieee1275_close-when-g.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 2dcfad49316cc757138a8c69f6b44ee1a240aa3d Mon Sep 17 00:00:00 2001 -From: Alec Brown -Date: Wed, 22 Jan 2025 02:55:12 +0000 -Subject: [PATCH] disk/ieee1275/ofdisk: Call grub_ieee1275_close() when - grub_malloc() fails - -In the dev_iterate() function a handle is opened but isn't closed when -grub_malloc() returns NULL. We should fix this by closing it on error. - -Signed-off-by: Alec Brown -Reviewed-by: Daniel Kiper -Upstream: fbaddcca541805c333f0fc792b82772594e73753 -Signed-off-by: Thomas Petazzoni ---- - grub-core/disk/ieee1275/ofdisk.c | 5 ++++- - 1 file changed, 4 insertions(+), 1 deletion(-) - -diff --git a/grub-core/disk/ieee1275/ofdisk.c b/grub-core/disk/ieee1275/ofdisk.c -index 4c5b89cbc..dbc0f1aba 100644 ---- a/grub-core/disk/ieee1275/ofdisk.c -+++ b/grub-core/disk/ieee1275/ofdisk.c -@@ -267,7 +267,10 @@ dev_iterate (const struct grub_ieee1275_devalias *alias) - - buf = grub_malloc (sz); - if (!buf) -- return; -+ { -+ grub_ieee1275_close (ihandle); -+ return; -+ } - bufptr = grub_stpcpy (buf, alias->path); - - for (i = 0; i < args.nentries; i++) --- -2.50.1 - diff --git a/boot/grub2/0049-fs-Use-safe-math-macros-to-prevent-overflows.patch b/boot/grub2/0049-fs-Use-safe-math-macros-to-prevent-overflows.patch deleted file mode 100644 index 4ad7463a13e..00000000000 --- a/boot/grub2/0049-fs-Use-safe-math-macros-to-prevent-overflows.patch +++ /dev/null @@ -1,362 +0,0 @@ -From 005280a4b3ba41ab0b4fea5e1d2a874646e6e12d Mon Sep 17 00:00:00 2001 -From: Lidong Chen -Date: Tue, 21 Jan 2025 19:02:36 +0000 -Subject: [PATCH] fs: Use safe math macros to prevent overflows - -Replace direct arithmetic operations with macros from include/grub/safemath.h -to prevent potential overflow issues when calculating the memory sizes. - -Signed-off-by: Lidong Chen -Reviewed-by: Daniel Kiper - -Conflicts: - grub-core/fs/erofs.c - -Upstream: 6608163b08a7a8be4b0ab2a5cd4593bba07fe2b7 -Signed-off-by: Thomas Petazzoni ---- - grub-core/fs/archelp.c | 9 ++++++++- - grub-core/fs/btrfs.c | 34 ++++++++++++++++++++++++++++------ - grub-core/fs/cpio_common.c | 16 ++++++++++++++-- - grub-core/fs/f2fs.c | 17 +++++++++++++++-- - grub-core/fs/ntfscomp.c | 9 ++++++++- - grub-core/fs/squash4.c | 12 +++++++++--- - grub-core/fs/xfs.c | 17 +++++++++++++++-- - 7 files changed, 97 insertions(+), 17 deletions(-) - -diff --git a/grub-core/fs/archelp.c b/grub-core/fs/archelp.c -index c1dcc6285..0816b28de 100644 ---- a/grub-core/fs/archelp.c -+++ b/grub-core/fs/archelp.c -@@ -21,6 +21,7 @@ - #include - #include - #include -+#include - - GRUB_MOD_LICENSE ("GPLv3+"); - -@@ -68,6 +69,7 @@ handle_symlink (struct grub_archelp_data *data, - char *rest; - char *linktarget; - grub_size_t linktarget_len; -+ grub_size_t sz; - - *restart = 0; - -@@ -98,7 +100,12 @@ handle_symlink (struct grub_archelp_data *data, - if (linktarget[0] == '\0') - return GRUB_ERR_NONE; - linktarget_len = grub_strlen (linktarget); -- target = grub_malloc (linktarget_len + grub_strlen (*name) + 2); -+ -+ if (grub_add (linktarget_len, grub_strlen (*name), &sz) || -+ grub_add (sz, 2, &sz)) -+ return grub_error (GRUB_ERR_OUT_OF_RANGE, N_("link target length overflow")); -+ -+ target = grub_malloc (sz); - if (!target) - return grub_errno; - -diff --git a/grub-core/fs/btrfs.c b/grub-core/fs/btrfs.c -index aae81482b..0625b1166 100644 ---- a/grub-core/fs/btrfs.c -+++ b/grub-core/fs/btrfs.c -@@ -1801,6 +1801,7 @@ find_path (struct grub_btrfs_data *data, - char *path_alloc = NULL; - char *origpath = NULL; - unsigned symlinks_max = 32; -+ grub_size_t sz; - - err = get_root (data, key, tree, type); - if (err) -@@ -1891,9 +1892,15 @@ find_path (struct grub_btrfs_data *data, - struct grub_btrfs_dir_item *cdirel; - if (elemsize > allocated) - { -- allocated = 2 * elemsize; -+ if (grub_mul (2, elemsize, &allocated) || -+ grub_add (allocated, 1, &sz)) -+ { -+ grub_free (path_alloc); -+ grub_free (origpath); -+ return grub_error (GRUB_ERR_OUT_OF_RANGE, N_("directory item size overflow")); -+ } - grub_free (direl); -- direl = grub_malloc (allocated + 1); -+ direl = grub_malloc (sz); - if (!direl) - { - grub_free (path_alloc); -@@ -1955,8 +1962,16 @@ find_path (struct grub_btrfs_data *data, - grub_free (origpath); - return err; - } -- tmp = grub_malloc (grub_le_to_cpu64 (inode.size) -- + grub_strlen (path) + 1); -+ -+ if (grub_add (grub_le_to_cpu64 (inode.size), grub_strlen (path), &sz) || -+ grub_add (sz, 1, &sz)) -+ { -+ grub_free (direl); -+ grub_free (path_alloc); -+ grub_free (origpath); -+ return grub_error (GRUB_ERR_OUT_OF_RANGE, N_("buffer size overflow")); -+ } -+ tmp = grub_malloc (sz); - if (!tmp) - { - grub_free (direl); -@@ -2078,6 +2093,7 @@ grub_btrfs_dir (grub_device_t device, const char *path, - grub_uint64_t tree; - grub_uint8_t type; - grub_size_t est_size = 0; -+ grub_size_t sz; - - if (!data) - return grub_errno; -@@ -2119,9 +2135,15 @@ grub_btrfs_dir (grub_device_t device, const char *path, - } - if (elemsize > allocated) - { -- allocated = 2 * elemsize; -+ if (grub_mul (2, elemsize, &allocated) || -+ grub_add (allocated, 1, &sz)) -+ { -+ grub_error (GRUB_ERR_OUT_OF_RANGE, N_("directory element size overflow")); -+ r = -grub_errno; -+ break; -+ } - grub_free (direl); -- direl = grub_malloc (allocated + 1); -+ direl = grub_malloc (sz); - if (!direl) - { - r = -grub_errno; -diff --git a/grub-core/fs/cpio_common.c b/grub-core/fs/cpio_common.c -index 5d41b6fdb..6ba58b354 100644 ---- a/grub-core/fs/cpio_common.c -+++ b/grub-core/fs/cpio_common.c -@@ -24,6 +24,7 @@ - #include - #include - #include -+#include - - GRUB_MOD_LICENSE ("GPLv3+"); - -@@ -48,6 +49,7 @@ grub_cpio_find_file (struct grub_archelp_data *data, char **name, - struct head hd; - grub_size_t namesize; - grub_uint32_t modeval; -+ grub_size_t sz; - - data->hofs = data->next_hofs; - -@@ -76,7 +78,10 @@ grub_cpio_find_file (struct grub_archelp_data *data, char **name, - - *mode = modeval; - -- *name = grub_malloc (namesize + 1); -+ if (grub_add (namesize, 1, &sz)) -+ return grub_error (GRUB_ERR_OUT_OF_RANGE, N_("file name size overflow")); -+ -+ *name = grub_malloc (sz); - if (*name == NULL) - return grub_errno; - -@@ -110,10 +115,17 @@ grub_cpio_get_link_target (struct grub_archelp_data *data) - { - char *ret; - grub_err_t err; -+ grub_size_t sz; - - if (data->size == 0) - return grub_strdup (""); -- ret = grub_malloc (data->size + 1); -+ -+ if (grub_add (data->size, 1, &sz)) -+ { -+ grub_error (GRUB_ERR_OUT_OF_RANGE, N_("target data size overflow")); -+ return NULL; -+ } -+ ret = grub_malloc (sz); - if (!ret) - return NULL; - -diff --git a/grub-core/fs/f2fs.c b/grub-core/fs/f2fs.c -index f6d6beaa5..72b4aa1e6 100644 ---- a/grub-core/fs/f2fs.c -+++ b/grub-core/fs/f2fs.c -@@ -28,6 +28,7 @@ - #include - #include - #include -+#include - - GRUB_MOD_LICENSE ("GPLv3+"); - -@@ -958,6 +959,7 @@ grub_f2fs_read_symlink (grub_fshelp_node_t node) - char *symlink; - struct grub_fshelp_node *diro = node; - grub_uint64_t filesize; -+ grub_size_t sz; - - if (!diro->inode_read) - { -@@ -968,7 +970,12 @@ grub_f2fs_read_symlink (grub_fshelp_node_t node) - - filesize = grub_f2fs_file_size(&diro->inode.i); - -- symlink = grub_malloc (filesize + 1); -+ if (grub_add (filesize, 1, &sz)) -+ { -+ grub_error (GRUB_ERR_OUT_OF_RANGE, N_("symlink size overflow")); -+ return 0; -+ } -+ symlink = grub_malloc (sz); - if (!symlink) - return 0; - -@@ -997,6 +1004,7 @@ grub_f2fs_check_dentries (struct grub_f2fs_dir_iter_ctx *ctx) - enum FILE_TYPE ftype; - int name_len; - int ret; -+ int sz; - - if (grub_f2fs_test_bit_le (i, ctx->bitmap) == 0) - { -@@ -1010,7 +1018,12 @@ grub_f2fs_check_dentries (struct grub_f2fs_dir_iter_ctx *ctx) - if (name_len >= F2FS_NAME_LEN) - return 0; - -- filename = grub_malloc (name_len + 1); -+ if (grub_add (name_len, 1, &sz)) -+ { -+ grub_error (GRUB_ERR_OUT_OF_RANGE, N_("directory entry name length overflow")); -+ return 0; -+ } -+ filename = grub_malloc (sz); - if (!filename) - return 0; - -diff --git a/grub-core/fs/ntfscomp.c b/grub-core/fs/ntfscomp.c -index a009f2c2d..f168a318e 100644 ---- a/grub-core/fs/ntfscomp.c -+++ b/grub-core/fs/ntfscomp.c -@@ -22,6 +22,7 @@ - #include - #include - #include -+#include - - GRUB_MOD_LICENSE ("GPLv3+"); - -@@ -310,6 +311,7 @@ ntfscomp (grub_uint8_t *dest, grub_disk_addr_t ofs, - { - grub_err_t ret; - grub_disk_addr_t vcn; -+ int log_sz; - - if (ctx->attr->sbuf) - { -@@ -349,7 +351,12 @@ ntfscomp (grub_uint8_t *dest, grub_disk_addr_t ofs, - } - - ctx->comp.comp_head = ctx->comp.comp_tail = 0; -- ctx->comp.cbuf = grub_malloc (1 << (ctx->comp.log_spc + GRUB_NTFS_BLK_SHR)); -+ if (grub_add (ctx->comp.log_spc, GRUB_NTFS_BLK_SHR, &log_sz)) -+ { -+ grub_error (GRUB_ERR_OUT_OF_RANGE, N_("compression buffer size overflow")); -+ return 0; -+ } -+ ctx->comp.cbuf = grub_malloc (1 << log_sz); - if (!ctx->comp.cbuf) - return 0; - -diff --git a/grub-core/fs/squash4.c b/grub-core/fs/squash4.c -index 6e9d63874..f91ff3bfa 100644 ---- a/grub-core/fs/squash4.c -+++ b/grub-core/fs/squash4.c -@@ -460,11 +460,11 @@ grub_squash_read_symlink (grub_fshelp_node_t node) - { - char *ret; - grub_err_t err; -- grub_size_t sz; -+ grub_uint32_t sz; - - if (grub_add (grub_le_to_cpu32 (node->ino.symlink.namelen), 1, &sz)) - { -- grub_error (GRUB_ERR_OUT_OF_RANGE, N_("overflow is detected")); -+ grub_error (GRUB_ERR_OUT_OF_RANGE, N_("symlink name length overflow")); - return NULL; - } - -@@ -580,6 +580,7 @@ grub_squash_iterate_dir (grub_fshelp_node_t dir, - struct grub_squash_dirent di; - struct grub_squash_inode ino; - grub_size_t sz; -+ grub_uint16_t nlen; - - err = read_chunk (dir->data, &di, sizeof (di), - grub_le_to_cpu64 (dir->data->sb.diroffset) -@@ -595,7 +596,12 @@ grub_squash_iterate_dir (grub_fshelp_node_t dir, - if (err) - return 0; - -- buf = grub_malloc (grub_le_to_cpu16 (di.namelen) + 2); -+ if (grub_add (grub_le_to_cpu16 (di.namelen), 2, &nlen)) -+ { -+ grub_error (GRUB_ERR_OUT_OF_RANGE, N_("name length overflow")); -+ return 0; -+ } -+ buf = grub_malloc (nlen); - if (!buf) - return 0; - err = read_chunk (dir->data, buf, -diff --git a/grub-core/fs/xfs.c b/grub-core/fs/xfs.c -index 74feeb86a..70c9f449b 100644 ---- a/grub-core/fs/xfs.c -+++ b/grub-core/fs/xfs.c -@@ -718,6 +718,7 @@ static char * - grub_xfs_read_symlink (grub_fshelp_node_t node) - { - grub_ssize_t size = grub_be_to_cpu64 (node->inode.size); -+ grub_size_t sz; - - if (size < 0) - { -@@ -739,7 +740,12 @@ grub_xfs_read_symlink (grub_fshelp_node_t node) - if (node->data->hascrc) - off = 56; - -- symlink = grub_malloc (size + 1); -+ if (grub_add (size, 1, &sz)) -+ { -+ grub_error (GRUB_ERR_OUT_OF_RANGE, N_("symlink size overflow")); -+ return 0; -+ } -+ symlink = grub_malloc (sz); - if (!symlink) - return 0; - -@@ -789,8 +795,15 @@ static int iterate_dir_call_hook (grub_uint64_t ino, const char *filename, - { - struct grub_fshelp_node *fdiro; - grub_err_t err; -+ grub_size_t sz; - -- fdiro = grub_malloc (grub_xfs_fshelp_size(ctx->diro->data) + 1); -+ if (grub_add (grub_xfs_fshelp_size(ctx->diro->data), 1, &sz)) -+ { -+ grub_error (GRUB_ERR_OUT_OF_RANGE, N_("directory data size overflow")); -+ grub_print_error (); -+ return 0; -+ } -+ fdiro = grub_malloc (sz); - if (!fdiro) - { - grub_print_error (); --- -2.50.1 - diff --git a/boot/grub2/0050-fs-Prevent-overflows-when-allocating-memory-for-arra.patch b/boot/grub2/0050-fs-Prevent-overflows-when-allocating-memory-for-arra.patch deleted file mode 100644 index e7bf8d543b7..00000000000 --- a/boot/grub2/0050-fs-Prevent-overflows-when-allocating-memory-for-arra.patch +++ /dev/null @@ -1,87 +0,0 @@ -From 593d7b8659bef80b1f6ae3b793332d8eca8b8131 Mon Sep 17 00:00:00 2001 -From: Lidong Chen -Date: Tue, 21 Jan 2025 19:02:37 +0000 -Subject: [PATCH] fs: Prevent overflows when allocating memory for arrays - -Use grub_calloc() when allocating memory for arrays to ensure proper -overflow checks are in place. - -The HFS+ and squash4 security vulnerabilities were reported by -Jonathan Bar Or . - -Fixes: CVE-2025-0678 -Fixes: CVE-2025-1125 - -Signed-off-by: Lidong Chen -Reviewed-by: Daniel Kiper -Upstream: 84bc0a9a68835952ae69165c11709811dae7634e -Signed-off-by: Thomas Petazzoni ---- - grub-core/fs/btrfs.c | 4 ++-- - grub-core/fs/hfspluscomp.c | 9 +++++++-- - grub-core/fs/squash4.c | 8 ++++---- - 3 files changed, 13 insertions(+), 8 deletions(-) - -diff --git a/grub-core/fs/btrfs.c b/grub-core/fs/btrfs.c -index 0625b1166..9c1e925c9 100644 ---- a/grub-core/fs/btrfs.c -+++ b/grub-core/fs/btrfs.c -@@ -1276,8 +1276,8 @@ grub_btrfs_mount (grub_device_t dev) - } - - data->n_devices_allocated = 16; -- data->devices_attached = grub_malloc (sizeof (data->devices_attached[0]) -- * data->n_devices_allocated); -+ data->devices_attached = grub_calloc (data->n_devices_allocated, -+ sizeof (data->devices_attached[0])); - if (!data->devices_attached) - { - grub_free (data); -diff --git a/grub-core/fs/hfspluscomp.c b/grub-core/fs/hfspluscomp.c -index 48ae438d8..a80954ee6 100644 ---- a/grub-core/fs/hfspluscomp.c -+++ b/grub-core/fs/hfspluscomp.c -@@ -244,14 +244,19 @@ hfsplus_open_compressed_real (struct grub_hfsplus_file *node) - return 0; - } - node->compress_index_size = grub_le_to_cpu32 (index_size); -- node->compress_index = grub_malloc (node->compress_index_size -- * sizeof (node->compress_index[0])); -+ node->compress_index = grub_calloc (node->compress_index_size, -+ sizeof (node->compress_index[0])); - if (!node->compress_index) - { - node->compressed = 0; - grub_free (attr_node); - return grub_errno; - } -+ -+ /* -+ * The node->compress_index_size * sizeof (node->compress_index[0]) is safe here -+ * due to relevant checks done in grub_calloc() above. -+ */ - if (grub_hfsplus_read_file (node, 0, 0, - 0x104 + sizeof (index_size), - node->compress_index_size -diff --git a/grub-core/fs/squash4.c b/grub-core/fs/squash4.c -index f91ff3bfa..cf2bca822 100644 ---- a/grub-core/fs/squash4.c -+++ b/grub-core/fs/squash4.c -@@ -822,10 +822,10 @@ direct_read (struct grub_squash_data *data, - break; - } - total_blocks = ((total_size + data->blksz - 1) >> data->log2_blksz); -- ino->block_sizes = grub_malloc (total_blocks -- * sizeof (ino->block_sizes[0])); -- ino->cumulated_block_sizes = grub_malloc (total_blocks -- * sizeof (ino->cumulated_block_sizes[0])); -+ ino->block_sizes = grub_calloc (total_blocks, -+ sizeof (ino->block_sizes[0])); -+ ino->cumulated_block_sizes = grub_calloc (total_blocks, -+ sizeof (ino->cumulated_block_sizes[0])); - if (!ino->block_sizes || !ino->cumulated_block_sizes) - { - grub_free (ino->block_sizes); --- -2.50.1 - diff --git a/boot/grub2/0051-fs-Prevent-overflows-when-assigning-returned-values-.patch b/boot/grub2/0051-fs-Prevent-overflows-when-assigning-returned-values-.patch deleted file mode 100644 index f1438a28fee..00000000000 --- a/boot/grub2/0051-fs-Prevent-overflows-when-assigning-returned-values-.patch +++ /dev/null @@ -1,110 +0,0 @@ -From 639711967a296edb0704c3d2c31691076d46f565 Mon Sep 17 00:00:00 2001 -From: Lidong Chen -Date: Tue, 21 Jan 2025 19:02:38 +0000 -Subject: [PATCH] fs: Prevent overflows when assigning returned values from - read_number() - -The direct assignment of the unsigned long long value returned by -read_number() can potentially lead to an overflow on a 32-bit systems. -The fix replaces the direct assignments with calls to grub_cast() -which detects the overflows and safely assigns the values if no -overflow is detected. - -Signed-off-by: Lidong Chen -Reviewed-by: Daniel Kiper -Upstream: cde9f7f338f8f5771777f0e7dfc423ddf952ad31 -Signed-off-by: Thomas Petazzoni ---- - grub-core/fs/cpio_common.c | 18 ++++++++++++++---- - grub-core/fs/tar.c | 23 ++++++++++++++++------- - 2 files changed, 30 insertions(+), 11 deletions(-) - -diff --git a/grub-core/fs/cpio_common.c b/grub-core/fs/cpio_common.c -index 6ba58b354..45ac119a8 100644 ---- a/grub-core/fs/cpio_common.c -+++ b/grub-core/fs/cpio_common.c -@@ -62,11 +62,21 @@ grub_cpio_find_file (struct grub_archelp_data *data, char **name, - #endif - ) - return grub_error (GRUB_ERR_BAD_FS, "invalid cpio archive"); -- data->size = read_number (hd.filesize, ARRAY_SIZE (hd.filesize)); -+ -+ if (grub_cast (read_number (hd.filesize, ARRAY_SIZE (hd.filesize)), &data->size)) -+ return grub_error (GRUB_ERR_BAD_FS, N_("data size overflow")); -+ - if (mtime) -- *mtime = read_number (hd.mtime, ARRAY_SIZE (hd.mtime)); -- modeval = read_number (hd.mode, ARRAY_SIZE (hd.mode)); -- namesize = read_number (hd.namesize, ARRAY_SIZE (hd.namesize)); -+ { -+ if (grub_cast (read_number (hd.mtime, ARRAY_SIZE (hd.mtime)), mtime)) -+ return grub_error (GRUB_ERR_BAD_FS, N_("mtime overflow")); -+ } -+ -+ if (grub_cast (read_number (hd.mode, ARRAY_SIZE (hd.mode)), &modeval)) -+ return grub_error (GRUB_ERR_BAD_FS, N_("mode overflow")); -+ -+ if (grub_cast (read_number (hd.namesize, ARRAY_SIZE (hd.namesize)), &namesize)) -+ return grub_error (GRUB_ERR_BAD_FS, N_("namesize overflow")); - - /* Don't allow negative numbers. */ - if (namesize >= 0x80000000) -diff --git a/grub-core/fs/tar.c b/grub-core/fs/tar.c -index fd2ec1f74..1eaa5349f 100644 ---- a/grub-core/fs/tar.c -+++ b/grub-core/fs/tar.c -@@ -99,9 +99,10 @@ grub_cpio_find_file (struct grub_archelp_data *data, char **name, - if (hd.typeflag == 'L') - { - grub_err_t err; -- grub_size_t namesize = read_number (hd.size, sizeof (hd.size)); -+ grub_size_t namesize; - -- if (grub_add (namesize, 1, &sz)) -+ if (grub_cast (read_number (hd.size, sizeof (hd.size)), &namesize) || -+ grub_add (namesize, 1, &sz)) - return grub_error (GRUB_ERR_BAD_FS, N_("name size overflow")); - - *name = grub_malloc (sz); -@@ -123,9 +124,10 @@ grub_cpio_find_file (struct grub_archelp_data *data, char **name, - if (hd.typeflag == 'K') - { - grub_err_t err; -- grub_size_t linksize = read_number (hd.size, sizeof (hd.size)); -+ grub_size_t linksize; - -- if (grub_add (linksize, 1, &sz)) -+ if (grub_cast (read_number (hd.size, sizeof (hd.size)), &linksize) || -+ grub_add (linksize, 1, &sz)) - return grub_error (GRUB_ERR_BAD_FS, N_("link size overflow")); - - if (data->linkname_alloc < sz) -@@ -174,15 +176,22 @@ grub_cpio_find_file (struct grub_archelp_data *data, char **name, - (*name)[extra_size + sizeof (hd.name)] = 0; - } - -- data->size = read_number (hd.size, sizeof (hd.size)); -+ if (grub_cast (read_number (hd.size, sizeof (hd.size)), &data->size)) -+ return grub_error (GRUB_ERR_BAD_FS, N_("data size overflow")); -+ - data->dofs = data->hofs + GRUB_DISK_SECTOR_SIZE; - data->next_hofs = data->dofs + ((data->size + GRUB_DISK_SECTOR_SIZE - 1) & - ~(GRUB_DISK_SECTOR_SIZE - 1)); - if (mtime) -- *mtime = read_number (hd.mtime, sizeof (hd.mtime)); -+ { -+ if (grub_cast (read_number (hd.mtime, sizeof (hd.mtime)), mtime)) -+ return grub_error (GRUB_ERR_BAD_FS, N_("mtime overflow")); -+ } - if (mode) - { -- *mode = read_number (hd.mode, sizeof (hd.mode)); -+ if (grub_cast (read_number (hd.mode, sizeof (hd.mode)), mode)) -+ return grub_error (GRUB_ERR_BAD_FS, N_("mode overflow")); -+ - switch (hd.typeflag) - { - /* Hardlink. */ --- -2.50.1 - diff --git a/boot/grub2/0052-fs-zfs-Use-safe-math-macros-to-prevent-overflows.patch b/boot/grub2/0052-fs-zfs-Use-safe-math-macros-to-prevent-overflows.patch deleted file mode 100644 index bbf93dd0b4a..00000000000 --- a/boot/grub2/0052-fs-zfs-Use-safe-math-macros-to-prevent-overflows.patch +++ /dev/null @@ -1,143 +0,0 @@ -From bd4fcbdbd9835716213debce07f08c81311ce9a6 Mon Sep 17 00:00:00 2001 -From: Lidong Chen -Date: Wed, 22 Jan 2025 07:17:02 +0000 -Subject: [PATCH] fs/zfs: Use safe math macros to prevent overflows - -Replace direct arithmetic operations with macros from include/grub/safemath.h -to prevent potential overflow issues when calculating the memory sizes. - -Signed-off-by: Lidong Chen -Reviewed-by: Daniel Kiper -Upstream: 88e491a0f744c6b19b6d4caa300a576ba56db7c9 -Signed-off-by: Thomas Petazzoni ---- - grub-core/fs/zfs/zfs.c | 50 +++++++++++++++++++++++++++++++++++++----- - 1 file changed, 44 insertions(+), 6 deletions(-) - -diff --git a/grub-core/fs/zfs/zfs.c b/grub-core/fs/zfs/zfs.c -index a497b1869..2f303d655 100644 ---- a/grub-core/fs/zfs/zfs.c -+++ b/grub-core/fs/zfs/zfs.c -@@ -2387,6 +2387,7 @@ fzap_iterate (dnode_end_t * zap_dnode, zap_phys_t * zap, - zap_dnode->endian) << DNODE_SHIFT); - grub_err_t err; - grub_zfs_endian_t endian; -+ grub_size_t sz; - - if (zap_verify (zap, zap_dnode->endian)) - return 0; -@@ -2448,8 +2449,14 @@ fzap_iterate (dnode_end_t * zap_dnode, zap_phys_t * zap, - if (le->le_type != ZAP_CHUNK_ENTRY) - continue; - -- buf = grub_malloc (grub_zfs_to_cpu16 (le->le_name_length, endian) -- * name_elem_length + 1); -+ if (grub_mul (grub_zfs_to_cpu16 (le->le_name_length, endian), name_elem_length, &sz) || -+ grub_add (sz, 1, &sz)) -+ { -+ grub_error (GRUB_ERR_OUT_OF_RANGE, N_("buffer size overflow")); -+ grub_free (l); -+ return grub_errno; -+ } -+ buf = grub_malloc (sz); - if (zap_leaf_array_get (l, endian, blksft, - grub_zfs_to_cpu16 (le->le_name_chunk, - endian), -@@ -2872,6 +2879,7 @@ dnode_get_path (struct subvolume *subvol, const char *path_in, dnode_end_t *dn, - && ((grub_zfs_to_cpu64(((znode_phys_t *) DN_BONUS (&dnode_path->dn.dn))->zp_mode, dnode_path->dn.endian) >> 12) & 0xf) == 0xa) - { - char *sym_value; -+ grub_size_t sz; - grub_size_t sym_sz; - int free_symval = 0; - char *oldpath = path, *oldpathbuf = path_buf; -@@ -2923,7 +2931,18 @@ dnode_get_path (struct subvolume *subvol, const char *path_in, dnode_end_t *dn, - break; - free_symval = 1; - } -- path = path_buf = grub_malloc (sym_sz + grub_strlen (oldpath) + 1); -+ -+ if (grub_add (sym_sz, grub_strlen (oldpath), &sz) || -+ grub_add (sz, 1, &sz)) -+ { -+ grub_error (GRUB_ERR_OUT_OF_RANGE, N_("path buffer size overflow")); -+ grub_free (oldpathbuf); -+ if (free_symval) -+ grub_free (sym_value); -+ err = grub_errno; -+ break; -+ } -+ path = path_buf = grub_malloc (sz); - if (!path_buf) - { - grub_free (oldpathbuf); -@@ -2960,6 +2979,7 @@ dnode_get_path (struct subvolume *subvol, const char *path_in, dnode_end_t *dn, - { - void *sahdrp; - int hdrsize; -+ grub_size_t sz; - - if (dnode_path->dn.dn.dn_bonuslen != 0) - { -@@ -2993,7 +3013,15 @@ dnode_get_path (struct subvolume *subvol, const char *path_in, dnode_end_t *dn, - + SA_SIZE_OFFSET), - dnode_path->dn.endian); - char *oldpath = path, *oldpathbuf = path_buf; -- path = path_buf = grub_malloc (sym_sz + grub_strlen (oldpath) + 1); -+ if (grub_add (sym_sz, grub_strlen (oldpath), &sz) || -+ grub_add (sz, 1, &sz)) -+ { -+ grub_error (GRUB_ERR_OUT_OF_RANGE, N_("path buffer size overflow")); -+ grub_free (oldpathbuf); -+ err = grub_errno; -+ break; -+ } -+ path = path_buf = grub_malloc (sz); - if (!path_buf) - { - grub_free (oldpathbuf); -@@ -3568,6 +3596,7 @@ grub_zfs_nvlist_lookup_nvlist_array (const char *nvlist, const char *name, - unsigned i; - grub_size_t nelm; - int elemsize = 0; -+ int sz; - - found = nvlist_find_value (nvlist, name, DATA_TYPE_NVLIST_ARRAY, &nvpair, - &size, &nelm); -@@ -3602,7 +3631,12 @@ grub_zfs_nvlist_lookup_nvlist_array (const char *nvlist, const char *name, - return 0; - } - -- ret = grub_zalloc (elemsize + sizeof (grub_uint32_t)); -+ if (grub_add (elemsize, sizeof (grub_uint32_t), &sz)) -+ { -+ grub_error (GRUB_ERR_OUT_OF_RANGE, N_("elemsize overflow")); -+ return 0; -+ } -+ ret = grub_zalloc (sz); - if (!ret) - return 0; - grub_memcpy (ret, nvlist, sizeof (grub_uint32_t)); -@@ -4193,6 +4227,7 @@ iterate_zap_snap (const char *name, grub_uint64_t val, - struct grub_dirhook_info info; - char *name2; - int ret; -+ grub_size_t sz; - - dnode_end_t mdn; - -@@ -4213,7 +4248,10 @@ iterate_zap_snap (const char *name, grub_uint64_t val, - return 0; - } - -- name2 = grub_malloc (grub_strlen (name) + 2); -+ if (grub_add (grub_strlen (name), 2, &sz)) -+ return grub_error (GRUB_ERR_OUT_OF_RANGE, N_("name length overflow")); -+ -+ name2 = grub_malloc (sz); - name2[0] = '@'; - grub_memcpy (name2 + 1, name, grub_strlen (name) + 1); - ret = ctx->hook (name2, &info, ctx->hook_data); --- -2.50.1 - diff --git a/boot/grub2/0053-fs-zfs-Prevent-overflows-when-allocating-memory-for-.patch b/boot/grub2/0053-fs-zfs-Prevent-overflows-when-allocating-memory-for-.patch deleted file mode 100644 index 7cf5524195d..00000000000 --- a/boot/grub2/0053-fs-zfs-Prevent-overflows-when-allocating-memory-for-.patch +++ /dev/null @@ -1,45 +0,0 @@ -From b39a42a7de6639c32829a5f4aff603190c69d689 Mon Sep 17 00:00:00 2001 -From: Lidong Chen -Date: Wed, 22 Jan 2025 07:17:03 +0000 -Subject: [PATCH] fs/zfs: Prevent overflows when allocating memory for arrays - -Use grub_calloc() when allocating memory for arrays to ensure proper -overflow checks are in place. - -Signed-off-by: Lidong Chen -Reviewed-by: Daniel Kiper -Upstream: 7f38e32c7ebeaebb79e2c71e3c7d5ea367d3a39c -Signed-off-by: Thomas Petazzoni ---- - grub-core/fs/zfs/zfs.c | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - -diff --git a/grub-core/fs/zfs/zfs.c b/grub-core/fs/zfs/zfs.c -index 2f303d655..9ab7bf319 100644 ---- a/grub-core/fs/zfs/zfs.c -+++ b/grub-core/fs/zfs/zfs.c -@@ -723,8 +723,8 @@ fill_vdev_info_real (struct grub_zfs_data *data, - { - fill->n_children = nelm; - -- fill->children = grub_zalloc (fill->n_children -- * sizeof (fill->children[0])); -+ fill->children = grub_calloc (fill->n_children, -+ sizeof (fill->children[0])); - } - - for (i = 0; i < nelm; i++) -@@ -3712,8 +3712,8 @@ zfs_mount (grub_device_t dev) - #endif - - data->n_devices_allocated = 16; -- data->devices_attached = grub_malloc (sizeof (data->devices_attached[0]) -- * data->n_devices_allocated); -+ data->devices_attached = grub_calloc (data->n_devices_allocated, -+ sizeof (data->devices_attached[0])); - data->n_devices_attached = 0; - err = scan_disk (dev, data, 1, &inserted); - if (err) --- -2.50.1 - diff --git a/boot/grub2/0054-fs-zfs-Check-if-returned-pointer-for-allocated-memor.patch b/boot/grub2/0054-fs-zfs-Check-if-returned-pointer-for-allocated-memor.patch deleted file mode 100644 index 1c208a7540b..00000000000 --- a/boot/grub2/0054-fs-zfs-Check-if-returned-pointer-for-allocated-memor.patch +++ /dev/null @@ -1,93 +0,0 @@ -From 177ae1f6b05fbe5a8c8e83d468c189ff339d608f Mon Sep 17 00:00:00 2001 -From: Lidong Chen -Date: Wed, 22 Jan 2025 07:17:01 +0000 -Subject: [PATCH] fs/zfs: Check if returned pointer for allocated memory is - NULL - -When using grub_malloc() or grub_zalloc(), these functions can fail if -we are out of memory. After allocating memory we should check if these -functions returned NULL and handle this error if they did. - -Signed-off-by: Lidong Chen -Reviewed-by: Daniel Kiper -Upstream: 13065f69dae0eeb60813809026de5bd021051892 -Signed-off-by: Thomas Petazzoni ---- - grub-core/fs/zfs/zfs.c | 26 ++++++++++++++++++++++++++ - 1 file changed, 26 insertions(+) - -diff --git a/grub-core/fs/zfs/zfs.c b/grub-core/fs/zfs/zfs.c -index 9ab7bf319..6e6d1c921 100644 ---- a/grub-core/fs/zfs/zfs.c -+++ b/grub-core/fs/zfs/zfs.c -@@ -614,6 +614,8 @@ zfs_fetch_nvlist (struct grub_zfs_device_desc *diskdesc, char **nvlist) - return grub_error (GRUB_ERR_BUG, "member drive unknown"); - - *nvlist = grub_malloc (VDEV_PHYS_SIZE); -+ if (!*nvlist) -+ return grub_errno; - - /* Read in the vdev name-value pair list (112K). */ - err = grub_disk_read (diskdesc->dev->disk, diskdesc->vdev_phys_sector, 0, -@@ -725,6 +727,11 @@ fill_vdev_info_real (struct grub_zfs_data *data, - - fill->children = grub_calloc (fill->n_children, - sizeof (fill->children[0])); -+ if (!fill->children) -+ { -+ grub_free (type); -+ return grub_errno; -+ } - } - - for (i = 0; i < nelm; i++) -@@ -2457,6 +2464,11 @@ fzap_iterate (dnode_end_t * zap_dnode, zap_phys_t * zap, - return grub_errno; - } - buf = grub_malloc (sz); -+ if (!buf) -+ { -+ grub_free (l); -+ return grub_errno; -+ } - if (zap_leaf_array_get (l, endian, blksft, - grub_zfs_to_cpu16 (le->le_name_chunk, - endian), -@@ -2472,6 +2484,12 @@ fzap_iterate (dnode_end_t * zap_dnode, zap_phys_t * zap, - val_length = ((int) le->le_value_length - * (int) le->le_int_size); - val = grub_malloc (grub_zfs_to_cpu16 (val_length, endian)); -+ if (!val) -+ { -+ grub_free (l); -+ grub_free (buf); -+ return grub_errno; -+ } - if (zap_leaf_array_get (l, endian, blksft, - grub_zfs_to_cpu16 (le->le_value_chunk, - endian), -@@ -3714,6 +3732,11 @@ zfs_mount (grub_device_t dev) - data->n_devices_allocated = 16; - data->devices_attached = grub_calloc (data->n_devices_allocated, - sizeof (data->devices_attached[0])); -+ if (!data->devices_attached) -+ { -+ grub_free (data); -+ return NULL; -+ } - data->n_devices_attached = 0; - err = scan_disk (dev, data, 1, &inserted); - if (err) -@@ -4252,6 +4275,9 @@ iterate_zap_snap (const char *name, grub_uint64_t val, - return grub_error (GRUB_ERR_OUT_OF_RANGE, N_("name length overflow")); - - name2 = grub_malloc (sz); -+ if (!name2) -+ return grub_errno; -+ - name2[0] = '@'; - grub_memcpy (name2 + 1, name, grub_strlen (name) + 1); - ret = ctx->hook (name2, &info, ctx->hook_data); --- -2.50.1 - diff --git a/boot/grub2/0055-fs-zfs-Add-missing-NULL-check-after-grub_strdup-call.patch b/boot/grub2/0055-fs-zfs-Add-missing-NULL-check-after-grub_strdup-call.patch deleted file mode 100644 index 0fcb427b749..00000000000 --- a/boot/grub2/0055-fs-zfs-Add-missing-NULL-check-after-grub_strdup-call.patch +++ /dev/null @@ -1,29 +0,0 @@ -From f60272b284e98ecd4ee38ec06aab6587cf525616 Mon Sep 17 00:00:00 2001 -From: Lidong Chen -Date: Wed, 22 Jan 2025 07:17:04 +0000 -Subject: [PATCH] fs/zfs: Add missing NULL check after grub_strdup() call - -Signed-off-by: Lidong Chen -Reviewed-by: Daniel Kiper -Upstream: dd6a4c8d10e02ca5056681e75795041a343636e4 -Signed-off-by: Thomas Petazzoni ---- - grub-core/fs/zfs/zfs.c | 2 ++ - 1 file changed, 2 insertions(+) - -diff --git a/grub-core/fs/zfs/zfs.c b/grub-core/fs/zfs/zfs.c -index 6e6d1c921..5ff647ffb 100644 ---- a/grub-core/fs/zfs/zfs.c -+++ b/grub-core/fs/zfs/zfs.c -@@ -3309,6 +3309,8 @@ dnode_get_fullpath (const char *fullpath, struct subvolume *subvol, - filename = 0; - snapname = 0; - fsname = grub_strdup (fullpath); -+ if (!fsname) -+ return grub_errno; - } - else - { --- -2.50.1 - diff --git a/boot/grub2/0056-net-Use-safe-math-macros-to-prevent-overflows.patch b/boot/grub2/0056-net-Use-safe-math-macros-to-prevent-overflows.patch deleted file mode 100644 index 111bfdf58a4..00000000000 --- a/boot/grub2/0056-net-Use-safe-math-macros-to-prevent-overflows.patch +++ /dev/null @@ -1,250 +0,0 @@ -From 6cb15ce33f7c7153ef986f3fe710e22062d37ba7 Mon Sep 17 00:00:00 2001 -From: Lidong Chen -Date: Wed, 22 Jan 2025 18:04:42 +0000 -Subject: [PATCH] net: Use safe math macros to prevent overflows - -Replace direct arithmetic operations with macros from include/grub/safemath.h -to prevent potential overflow issues when calculating the memory sizes. - -Signed-off-by: Lidong Chen -Signed-off-by: Alec Brown -Reviewed-by: Daniel Kiper - -Conflicts: - grub-core/net/bootp.c - grub-core/net/net.c - -Upstream: 4beeff8a31c4fb4071d2225533cfa316b5a58391 -Signed-off-by: Thomas Petazzoni ---- - grub-core/net/bootp.c | 16 ++++++++-- - grub-core/net/dns.c | 9 +++++- - grub-core/net/drivers/ieee1275/ofnet.c | 20 ++++++++++-- - grub-core/net/net.c | 43 +++++++++++++++++++++----- - 4 files changed, 75 insertions(+), 13 deletions(-) - -diff --git a/grub-core/net/bootp.c b/grub-core/net/bootp.c -index abe45ef7b..2f45a3cc2 100644 ---- a/grub-core/net/bootp.c -+++ b/grub-core/net/bootp.c -@@ -24,6 +24,7 @@ - #include - #include - #include -+#include - - struct grub_dhcp_discover_options - { -@@ -686,6 +687,7 @@ grub_cmd_dhcpopt (struct grub_command *cmd __attribute__ ((unused)), - unsigned num; - const grub_uint8_t *ptr; - grub_uint8_t taglength; -+ grub_uint8_t len; - - if (argc < 4) - return grub_error (GRUB_ERR_BAD_ARGUMENT, -@@ -727,7 +729,12 @@ grub_cmd_dhcpopt (struct grub_command *cmd __attribute__ ((unused)), - if (grub_strcmp (args[3], "string") == 0) - { - grub_err_t err = GRUB_ERR_NONE; -- char *val = grub_malloc (taglength + 1); -+ char *val; -+ -+ if (grub_add (taglength, 1, &len)) -+ return grub_error (GRUB_ERR_OUT_OF_RANGE, N_("tag length overflow")); -+ -+ val = grub_malloc (len); - if (!val) - return grub_errno; - grub_memcpy (val, ptr, taglength); -@@ -760,7 +767,12 @@ grub_cmd_dhcpopt (struct grub_command *cmd __attribute__ ((unused)), - if (grub_strcmp (args[3], "hex") == 0) - { - grub_err_t err = GRUB_ERR_NONE; -- char *val = grub_malloc (2 * taglength + 1); -+ char *val; -+ -+ if (grub_mul (taglength, 2, &len) || grub_add (len, 1, &len)) -+ return grub_error (GRUB_ERR_OUT_OF_RANGE, N_("tag length overflow")); -+ -+ val = grub_malloc (len); - int i; - if (!val) - return grub_errno; -diff --git a/grub-core/net/dns.c b/grub-core/net/dns.c -index fcc09aa65..39b0c46cf 100644 ---- a/grub-core/net/dns.c -+++ b/grub-core/net/dns.c -@@ -224,10 +224,17 @@ get_name (const grub_uint8_t *name_at, const grub_uint8_t *head, - { - int length; - char *ret; -+ int len; - - if (!check_name_real (name_at, head, tail, NULL, &length, NULL)) - return NULL; -- ret = grub_malloc (length + 1); -+ -+ if (grub_add (length, 1, &len)) -+ { -+ grub_error (GRUB_ERR_OUT_OF_RANGE, N_("name length overflow")); -+ return NULL; -+ } -+ ret = grub_malloc (len); - if (!ret) - return NULL; - if (!check_name_real (name_at, head, tail, NULL, NULL, ret)) -diff --git a/grub-core/net/drivers/ieee1275/ofnet.c b/grub-core/net/drivers/ieee1275/ofnet.c -index 78f03df8e..c35b107ad 100644 ---- a/grub-core/net/drivers/ieee1275/ofnet.c -+++ b/grub-core/net/drivers/ieee1275/ofnet.c -@@ -22,6 +22,7 @@ - #include - #include - #include -+#include - - GRUB_MOD_LICENSE ("GPLv3+"); - -@@ -391,6 +392,7 @@ search_net_devices (struct grub_ieee1275_devalias *alias) - grub_uint8_t *pprop; - char *shortname; - char need_suffix = 1; -+ grub_size_t sz; - - if (grub_strcmp (alias->type, "network") != 0) - return 0; -@@ -448,9 +450,23 @@ search_net_devices (struct grub_ieee1275_devalias *alias) - } - - if (need_suffix) -- ofdata->path = grub_malloc (grub_strlen (alias->path) + sizeof (SUFFIX)); -+ { -+ if (grub_add (grub_strlen (alias->path), sizeof (SUFFIX), &sz)) -+ { -+ grub_error (GRUB_ERR_OUT_OF_RANGE, N_("overflow detected while obatining size of ofdata path")); -+ grub_print_error (); -+ return 0; -+ } -+ } - else -- ofdata->path = grub_malloc (grub_strlen (alias->path) + 1); -+ { -+ if (grub_add (grub_strlen (alias->path), 1, &sz)) -+ { -+ grub_error (GRUB_ERR_OUT_OF_RANGE, N_("overflow detected while obatining size of ofdata path")); -+ grub_print_error (); -+ return 0; -+ } -+ } - if (!ofdata->path) - { - grub_print_error (); -diff --git a/grub-core/net/net.c b/grub-core/net/net.c -index 2bd490279..27df4669a 100644 ---- a/grub-core/net/net.c -+++ b/grub-core/net/net.c -@@ -32,6 +32,7 @@ - #include - #include - #include -+#include - - GRUB_MOD_LICENSE ("GPLv3+"); - -@@ -206,6 +207,7 @@ grub_net_ipv6_get_slaac (struct grub_net_card *card, - { - struct grub_net_slaac_mac_list *slaac; - char *ptr; -+ grub_size_t sz; - - for (slaac = card->slaac_list; slaac; slaac = slaac->next) - if (grub_net_hwaddr_cmp (&slaac->address, hwaddr) == 0) -@@ -215,9 +217,16 @@ grub_net_ipv6_get_slaac (struct grub_net_card *card, - if (!slaac) - return NULL; - -- slaac->name = grub_malloc (grub_strlen (card->name) -- + GRUB_NET_MAX_STR_HWADDR_LEN -- + sizeof (":slaac")); -+ if (grub_add (grub_strlen (card->name), -+ (GRUB_NET_MAX_STR_HWADDR_LEN + sizeof (":slaac")), &sz)) -+ { -+ grub_free (slaac); -+ grub_error (GRUB_ERR_OUT_OF_RANGE, -+ "overflow detected while obtaining size of slaac name"); -+ return NULL; -+ } -+ -+ slaac->name = grub_malloc (sz); - ptr = grub_stpcpy (slaac->name, card->name); - if (grub_net_hwaddr_cmp (&card->default_address, hwaddr) != 0) - { -@@ -288,6 +297,7 @@ grub_net_ipv6_get_link_local (struct grub_net_card *card, - char *name; - char *ptr; - grub_net_network_level_address_t addr; -+ grub_size_t sz; - - addr.type = GRUB_NET_NETWORK_LEVEL_PROTOCOL_IPV6; - addr.ipv6[0] = grub_cpu_to_be64_compile_time (0xfe80ULL << 48); -@@ -302,9 +312,14 @@ grub_net_ipv6_get_link_local (struct grub_net_card *card, - return inf; - } - -- name = grub_malloc (grub_strlen (card->name) -- + GRUB_NET_MAX_STR_HWADDR_LEN -- + sizeof (":link")); -+ if (grub_add (grub_strlen (card->name), -+ (GRUB_NET_MAX_STR_HWADDR_LEN + sizeof (":link")), &sz)) -+ { -+ grub_error (GRUB_ERR_OUT_OF_RANGE, -+ "overflow detected while obtaining size of link name"); -+ return NULL; -+ } -+ name = grub_malloc (sz); - if (!name) - return NULL; - -@@ -1435,9 +1450,15 @@ grub_net_open_real (const char *name) - if (grub_strchr (port_start + 1, ':')) - { - int iplen = grub_strlen (server); -+ grub_size_t sz; - - /* Bracket bare IPv6 addr. */ -- host = grub_malloc (iplen + 3); -+ if (grub_add (iplen, 3, &sz)) -+ { -+ grub_error (GRUB_ERR_OUT_OF_RANGE, N_("overflow detected while obtaining length of host")); -+ return NULL; -+ } -+ host = grub_malloc (sz); - if (!host) - return NULL; - -@@ -1692,6 +1713,7 @@ grub_env_set_net_property (const char *intername, const char *suffix, - { - char *varname, *varvalue; - char *ptr; -+ grub_size_t sz; - - varname = grub_xasprintf ("net_%s_%s", intername, suffix); - if (!varname) -@@ -1699,7 +1721,12 @@ grub_env_set_net_property (const char *intername, const char *suffix, - for (ptr = varname; *ptr; ptr++) - if (*ptr == ':') - *ptr = '_'; -- varvalue = grub_malloc (len + 1); -+ if (grub_add (len, 1, &sz)) -+ { -+ grub_free (varname); -+ return grub_error (GRUB_ERR_OUT_OF_RANGE, "overflow detected while obtaining the size of an env variable"); -+ } -+ varvalue = grub_malloc (sz); - if (!varvalue) - { - grub_free (varname); --- -2.50.1 - diff --git a/boot/grub2/0057-net-Prevent-overflows-when-allocating-memory-for-arr.patch b/boot/grub2/0057-net-Prevent-overflows-when-allocating-memory-for-arr.patch deleted file mode 100644 index b4a50f6a4ff..00000000000 --- a/boot/grub2/0057-net-Prevent-overflows-when-allocating-memory-for-arr.patch +++ /dev/null @@ -1,50 +0,0 @@ -From 5d483e4c7c5a20a17a413f0cc51decfbb5828a5a Mon Sep 17 00:00:00 2001 -From: Lidong Chen -Date: Wed, 22 Jan 2025 18:04:43 +0000 -Subject: [PATCH] net: Prevent overflows when allocating memory for arrays - -Use grub_calloc() when allocating memory for arrays to ensure proper -overflow checks are in place. - -Signed-off-by: Lidong Chen -Reviewed-by: Daniel Kiper -Upstream: dee2c14fd66bc497cdc74c69fde8c9b84637c8eb -Signed-off-by: Thomas Petazzoni ---- - grub-core/net/dns.c | 4 ++-- - grub-core/net/net.c | 4 ++-- - 2 files changed, 4 insertions(+), 4 deletions(-) - -diff --git a/grub-core/net/dns.c b/grub-core/net/dns.c -index 39b0c46cf..f20cd6f83 100644 ---- a/grub-core/net/dns.c -+++ b/grub-core/net/dns.c -@@ -470,8 +470,8 @@ grub_net_dns_lookup (const char *name, - && grub_get_time_ms () < dns_cache[h].limit_time) - { - grub_dprintf ("dns", "retrieved from cache\n"); -- *addresses = grub_malloc (dns_cache[h].naddresses -- * sizeof ((*addresses)[0])); -+ *addresses = grub_calloc (dns_cache[h].naddresses, -+ sizeof ((*addresses)[0])); - if (!*addresses) - return grub_errno; - *naddresses = dns_cache[h].naddresses; -diff --git a/grub-core/net/net.c b/grub-core/net/net.c -index 27df4669a..ea88ae8a8 100644 ---- a/grub-core/net/net.c -+++ b/grub-core/net/net.c -@@ -88,8 +88,8 @@ grub_net_link_layer_add_address (struct grub_net_card *card, - /* Add sender to cache table. */ - if (card->link_layer_table == NULL) - { -- card->link_layer_table = grub_zalloc (LINK_LAYER_CACHE_SIZE -- * sizeof (card->link_layer_table[0])); -+ card->link_layer_table = grub_calloc (LINK_LAYER_CACHE_SIZE, -+ sizeof (card->link_layer_table[0])); - if (card->link_layer_table == NULL) - return; - } --- -2.50.1 - diff --git a/boot/grub2/0058-net-Check-if-returned-pointer-for-allocated-memory-i.patch b/boot/grub2/0058-net-Check-if-returned-pointer-for-allocated-memory-i.patch deleted file mode 100644 index 4ed78b82bf3..00000000000 --- a/boot/grub2/0058-net-Check-if-returned-pointer-for-allocated-memory-i.patch +++ /dev/null @@ -1,36 +0,0 @@ -From cc4c75dd3bf99f08fc2ef796b613c9413cf46399 Mon Sep 17 00:00:00 2001 -From: Alec Brown -Date: Wed, 22 Jan 2025 18:04:44 +0000 -Subject: [PATCH] net: Check if returned pointer for allocated memory is NULL - -When using grub_malloc(), the function can fail if we are out of memory. -After allocating memory we should check if this function returned NULL -and handle this error if it did. - -Signed-off-by: Alec Brown -Reviewed-by: Daniel Kiper -Upstream: 1c06ec900591d1fab6fbacf80dc010541d0a5ec8 -Signed-off-by: Thomas Petazzoni ---- - grub-core/net/net.c | 5 +++++ - 1 file changed, 5 insertions(+) - -diff --git a/grub-core/net/net.c b/grub-core/net/net.c -index ea88ae8a8..6774f4ad0 100644 ---- a/grub-core/net/net.c -+++ b/grub-core/net/net.c -@@ -227,6 +227,11 @@ grub_net_ipv6_get_slaac (struct grub_net_card *card, - } - - slaac->name = grub_malloc (sz); -+ if (slaac->name == NULL) -+ { -+ grub_free (slaac); -+ return NULL; -+ } - ptr = grub_stpcpy (slaac->name, card->name); - if (grub_net_hwaddr_cmp (&card->default_address, hwaddr) != 0) - { --- -2.50.1 - diff --git a/boot/grub2/0059-fs-sfs-Check-if-allocated-memory-is-NULL.patch b/boot/grub2/0059-fs-sfs-Check-if-allocated-memory-is-NULL.patch deleted file mode 100644 index baf4efbac6e..00000000000 --- a/boot/grub2/0059-fs-sfs-Check-if-allocated-memory-is-NULL.patch +++ /dev/null @@ -1,37 +0,0 @@ -From afacc73c48934b66e18d9d12fef2ae6b44f105ea Mon Sep 17 00:00:00 2001 -From: Alec Brown -Date: Tue, 28 Jan 2025 05:15:50 +0000 -Subject: [PATCH] fs/sfs: Check if allocated memory is NULL - -When using grub_zalloc(), if we are out of memory, this function can fail. -After allocating memory, we should check if grub_zalloc() returns NULL. -If so, we should handle this error. - -Fixes: CID 473856 - -Signed-off-by: Alec Brown -Reviewed-by: Ross Philipson -Reviewed-by: Daniel Kiper -Upstream: e3c578a56f9294e286b6028ca7c1def997a17b15 -Signed-off-by: Thomas Petazzoni ---- - grub-core/fs/sfs.c | 3 +++ - 1 file changed, 3 insertions(+) - -diff --git a/grub-core/fs/sfs.c b/grub-core/fs/sfs.c -index 88705b3a2..bad4ae8d1 100644 ---- a/grub-core/fs/sfs.c -+++ b/grub-core/fs/sfs.c -@@ -429,6 +429,9 @@ grub_sfs_mount (grub_disk_t disk) - - 24 /* offsetof (struct grub_sfs_objc, objects) */ - - 25); /* offsetof (struct grub_sfs_obj, filename) */ - data->label = grub_zalloc (max_len + 1); -+ if (data->label == NULL) -+ goto fail; -+ - grub_strncpy (data->label, (char *) rootobjc->objects[0].filename, max_len); - - grub_free (rootobjc_data); --- -2.50.1 - diff --git a/boot/grub2/0060-script-execute-Fix-potential-underflow-and-NULL-dere.patch b/boot/grub2/0060-script-execute-Fix-potential-underflow-and-NULL-dere.patch deleted file mode 100644 index f84ee5de1f0..00000000000 --- a/boot/grub2/0060-script-execute-Fix-potential-underflow-and-NULL-dere.patch +++ /dev/null @@ -1,37 +0,0 @@ -From 6cb70802581222ba80a37c3e2fd4b8357a859dad Mon Sep 17 00:00:00 2001 -From: Lidong Chen -Date: Wed, 29 Jan 2025 06:48:37 +0000 -Subject: [PATCH] script/execute: Fix potential underflow and NULL dereference - -The result is initialized to 0 in grub_script_arglist_to_argv(). -If the for loop condition is not met both result.args and result.argc -remain 0 causing result.argc - 1 to underflow and/or result.args NULL -dereference. Fix the issues by adding relevant checks. - -Fixes: CID 473880 - -Signed-off-by: Lidong Chen -Reviewed-by: Daniel Kiper -Upstream: d13b6e8ebd10b4eb16698a002aa40258cf6e6f0e -Signed-off-by: Thomas Petazzoni ---- - grub-core/script/execute.c | 3 +++ - 1 file changed, 3 insertions(+) - -diff --git a/grub-core/script/execute.c b/grub-core/script/execute.c -index e1450f45d..a86e0051f 100644 ---- a/grub-core/script/execute.c -+++ b/grub-core/script/execute.c -@@ -760,6 +760,9 @@ cleanup: - } - } - -+ if (result.args == NULL || result.argc == 0) -+ goto fail; -+ - if (! result.args[result.argc - 1]) - result.argc--; - --- -2.50.1 - diff --git a/boot/grub2/0061-osdep-unix-getroot-Fix-potential-underflow.patch b/boot/grub2/0061-osdep-unix-getroot-Fix-potential-underflow.patch deleted file mode 100644 index 6a5588c34ec..00000000000 --- a/boot/grub2/0061-osdep-unix-getroot-Fix-potential-underflow.patch +++ /dev/null @@ -1,40 +0,0 @@ -From 050f09a5e16a935be4a4770f59f2a7ff977fc088 Mon Sep 17 00:00:00 2001 -From: Lidong Chen -Date: Wed, 29 Jan 2025 06:48:38 +0000 -Subject: [PATCH] osdep/unix/getroot: Fix potential underflow - -The entry_len is initialized in grub_find_root_devices_from_mountinfo() -to 0 before the while loop iterates through /proc/self/mountinfo. If the -file is empty or contains only invalid entries entry_len remains -0 causing entry_len - 1 in the subsequent for loop initialization -to underflow. To prevent this add a check to ensure entry_len > 0 before -entering the for loop. - -Fixes: CID 473877 - -Signed-off-by: Lidong Chen -Reviewed-by: Daniel Kiper -Reviewed-by: Ross Philipson -Upstream: 66733f7c7dae889861ea3ef3ec0710811486019e -Signed-off-by: Thomas Petazzoni ---- - grub-core/osdep/linux/getroot.c | 3 +++ - 1 file changed, 3 insertions(+) - -diff --git a/grub-core/osdep/linux/getroot.c b/grub-core/osdep/linux/getroot.c -index 7dd775d2a..527d4f0c5 100644 ---- a/grub-core/osdep/linux/getroot.c -+++ b/grub-core/osdep/linux/getroot.c -@@ -484,6 +484,9 @@ again: - } - } - -+ if (!entry_len) -+ goto out; -+ - /* Now scan visible mounts for the ones we're interested in. */ - for (i = entry_len - 1; i >= 0; i--) - { --- -2.50.1 - diff --git a/boot/grub2/0062-misc-Ensure-consistent-overflow-error-messages.patch b/boot/grub2/0062-misc-Ensure-consistent-overflow-error-messages.patch deleted file mode 100644 index 2add69d9430..00000000000 --- a/boot/grub2/0062-misc-Ensure-consistent-overflow-error-messages.patch +++ /dev/null @@ -1,60 +0,0 @@ -From 3a844f1139dd6fdcc90278239c8f6ea43aad9f2e Mon Sep 17 00:00:00 2001 -From: Lidong Chen -Date: Tue, 21 Jan 2025 19:02:39 +0000 -Subject: [PATCH] misc: Ensure consistent overflow error messages - -Update the overflow error messages to make them consistent -across the GRUB code. - -Signed-off-by: Lidong Chen -Reviewed-by: Daniel Kiper -Upstream: f8795cde217e21539c2f236bcbb1a4bf521086b3 -Signed-off-by: Thomas Petazzoni ---- - grub-core/fs/ntfs.c | 2 +- - grub-core/fs/ntfscomp.c | 2 +- - grub-core/video/readers/png.c | 2 +- - 3 files changed, 3 insertions(+), 3 deletions(-) - -diff --git a/grub-core/fs/ntfs.c b/grub-core/fs/ntfs.c -index bce81947c..b4c70a71d 100644 ---- a/grub-core/fs/ntfs.c -+++ b/grub-core/fs/ntfs.c -@@ -364,7 +364,7 @@ retry: - goto retry; - } - } -- return grub_error (GRUB_ERR_BAD_FS, "run list overflown"); -+ return grub_error (GRUB_ERR_BAD_FS, "run list overflow"); - } - ctx->curr_vcn = ctx->next_vcn; - ctx->next_vcn += read_run_data (run, c1, 0); /* length of current VCN */ -diff --git a/grub-core/fs/ntfscomp.c b/grub-core/fs/ntfscomp.c -index f168a318e..b68bf5e40 100644 ---- a/grub-core/fs/ntfscomp.c -+++ b/grub-core/fs/ntfscomp.c -@@ -30,7 +30,7 @@ static grub_err_t - decomp_nextvcn (struct grub_ntfs_comp *cc) - { - if (cc->comp_head >= cc->comp_tail) -- return grub_error (GRUB_ERR_BAD_FS, "compression block overflown"); -+ return grub_error (GRUB_ERR_BAD_FS, "compression block overflow"); - if (grub_disk_read - (cc->disk, - (cc->comp_table[cc->comp_head].next_lcn - -diff --git a/grub-core/video/readers/png.c b/grub-core/video/readers/png.c -index 3163e97bf..aa7524b7d 100644 ---- a/grub-core/video/readers/png.c -+++ b/grub-core/video/readers/png.c -@@ -626,7 +626,7 @@ static grub_err_t - grub_png_output_byte (struct grub_png_data *data, grub_uint8_t n) - { - if (--data->raw_bytes < 0) -- return grub_error (GRUB_ERR_BAD_FILE_TYPE, "image size overflown"); -+ return grub_error (GRUB_ERR_BAD_FILE_TYPE, "image size overflow"); - - if (data->cur_column == 0) - { --- -2.50.1 - diff --git a/boot/grub2/0063-bus-usb-ehci-Define-GRUB_EHCI_TOGGLE-as-grub_uint32_.patch b/boot/grub2/0063-bus-usb-ehci-Define-GRUB_EHCI_TOGGLE-as-grub_uint32_.patch deleted file mode 100644 index 18d5e880875..00000000000 --- a/boot/grub2/0063-bus-usb-ehci-Define-GRUB_EHCI_TOGGLE-as-grub_uint32_.patch +++ /dev/null @@ -1,35 +0,0 @@ -From 12dae049169b978aaa1e162f40954910ad90f2df Mon Sep 17 00:00:00 2001 -From: Alec Brown -Date: Tue, 4 Feb 2025 15:11:10 +0000 -Subject: [PATCH] bus/usb/ehci: Define GRUB_EHCI_TOGGLE as grub_uint32_t - -The Coverity indicates that GRUB_EHCI_TOGGLE is an int that contains -a negative value and we are using it for the variable token which is -grub_uint32_t. To remedy this we can cast the definition to grub_uint32_t. - -Fixes: CID 473851 - -Signed-off-by: Alec Brown -Reviewed-by: Daniel Kiper -Upstream: 9907d9c2723304b42cf6da74f1cc6c4601391956 -Signed-off-by: Thomas Petazzoni ---- - grub-core/bus/usb/ehci.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/grub-core/bus/usb/ehci.c b/grub-core/bus/usb/ehci.c -index 9abebc6bd..2db07c7c0 100644 ---- a/grub-core/bus/usb/ehci.c -+++ b/grub-core/bus/usb/ehci.c -@@ -218,7 +218,7 @@ enum - - #define GRUB_EHCI_TERMINATE (1<<0) - --#define GRUB_EHCI_TOGGLE (1<<31) -+#define GRUB_EHCI_TOGGLE ((grub_uint32_t) 1<<31) - - enum - { --- -2.50.1 - diff --git a/boot/grub2/0064-normal-menu-Use-safe-math-to-avoid-an-integer-overfl.patch b/boot/grub2/0064-normal-menu-Use-safe-math-to-avoid-an-integer-overfl.patch deleted file mode 100644 index 8dffc38fa4c..00000000000 --- a/boot/grub2/0064-normal-menu-Use-safe-math-to-avoid-an-integer-overfl.patch +++ /dev/null @@ -1,46 +0,0 @@ -From 6fa61b113427cb9db600a4a2a2f38ce09595f15f Mon Sep 17 00:00:00 2001 -From: Alec Brown -Date: Tue, 4 Feb 2025 15:11:11 +0000 -Subject: [PATCH] normal/menu: Use safe math to avoid an integer overflow - -The Coverity indicates that the variable current_entry might overflow. -To prevent this use safe math when adding GRUB_MENU_PAGE_SIZE to current_entry. - -On the occasion fix limiting condition which was broken. - -Fixes: CID 473853 - -Signed-off-by: Alec Brown -Reviewed-by: Daniel Kiper -Upstream: 5b36a5210e21bee2624f8acc36aefd8f10266adb -Signed-off-by: Thomas Petazzoni ---- - grub-core/normal/menu.c | 5 ++--- - 1 file changed, 2 insertions(+), 3 deletions(-) - -diff --git a/grub-core/normal/menu.c b/grub-core/normal/menu.c -index 6a90e091f..7ac6abf93 100644 ---- a/grub-core/normal/menu.c -+++ b/grub-core/normal/menu.c -@@ -32,6 +32,7 @@ - #include - #include - #include -+#include - - /* Time to delay after displaying an error message about a default/fallback - entry failing to boot. */ -@@ -751,9 +752,7 @@ run_menu (grub_menu_t menu, int nested, int *auto_boot, int *notify_boot) - - case GRUB_TERM_CTRL | 'c': - case GRUB_TERM_KEY_NPAGE: -- if (current_entry + GRUB_MENU_PAGE_SIZE < menu->size) -- current_entry += GRUB_MENU_PAGE_SIZE; -- else -+ if (grub_add (current_entry, GRUB_MENU_PAGE_SIZE, ¤t_entry) || current_entry >= menu->size) - current_entry = menu->size - 1; - menu_set_chosen_entry (current_entry); - break; --- -2.50.1 - diff --git a/boot/grub2/0065-kern-partition-Add-sanity-check-after-grub_strtoul-c.patch b/boot/grub2/0065-kern-partition-Add-sanity-check-after-grub_strtoul-c.patch deleted file mode 100644 index 3f35ba50196..00000000000 --- a/boot/grub2/0065-kern-partition-Add-sanity-check-after-grub_strtoul-c.patch +++ /dev/null @@ -1,51 +0,0 @@ -From d5385ae4e4d0c443e188e43c2b0703b68aaf55a3 Mon Sep 17 00:00:00 2001 -From: Lidong Chen -Date: Thu, 6 Feb 2025 18:16:56 +0000 -Subject: [PATCH] kern/partition: Add sanity check after grub_strtoul() call - -The current code incorrectly assumes that both the input and the values -returned by grub_strtoul() are always valid which can lead to potential -errors. This fix ensures proper validation to prevent any unintended issues. - -Fixes: CID 473843 - -Signed-off-by: Lidong Chen -Reviewed-by: Daniel Kiper -Upstream: 8e6e87e7923ca2ae880021cb42a35cc9bb4c8fe2 -Signed-off-by: Thomas Petazzoni ---- - grub-core/kern/partition.c | 12 ++++++++++-- - 1 file changed, 10 insertions(+), 2 deletions(-) - -diff --git a/grub-core/kern/partition.c b/grub-core/kern/partition.c -index 704512a20..c6a578cf4 100644 ---- a/grub-core/kern/partition.c -+++ b/grub-core/kern/partition.c -@@ -125,14 +125,22 @@ grub_partition_probe (struct grub_disk *disk, const char *str) - for (ptr = str; *ptr;) - { - grub_partition_map_t partmap; -- int num; -+ unsigned long num; - const char *partname, *partname_end; - - partname = ptr; - while (*ptr && grub_isalpha (*ptr)) - ptr++; - partname_end = ptr; -- num = grub_strtoul (ptr, &ptr, 0) - 1; -+ -+ num = grub_strtoul (ptr, &ptr, 0); -+ if (*ptr != '\0' || num == 0 || num > GRUB_INT_MAX) -+ { -+ grub_error (GRUB_ERR_BAD_NUMBER, N_("invalid partition number")); -+ return 0; -+ } -+ -+ num -= 1; - - curpart = 0; - /* Use the first partition map type found. */ --- -2.50.1 - diff --git a/boot/grub2/0066-kern-misc-Add-sanity-check-after-grub_strtoul-call.patch b/boot/grub2/0066-kern-misc-Add-sanity-check-after-grub_strtoul-call.patch deleted file mode 100644 index 7e9e377154b..00000000000 --- a/boot/grub2/0066-kern-misc-Add-sanity-check-after-grub_strtoul-call.patch +++ /dev/null @@ -1,62 +0,0 @@ -From 009d1b7189c6eba0b8d284c94a9ef7dc9db351d1 Mon Sep 17 00:00:00 2001 -From: Lidong Chen -Date: Thu, 6 Feb 2025 18:16:57 +0000 -Subject: [PATCH] kern/misc: Add sanity check after grub_strtoul() call - -When the format string, fmt0, includes a positional argument -grub_strtoul() or grub_strtoull() is called to extract the argument -position. However, the returned argument position isn't fully validated. -If the format is something like "%0$x" then these functions return -0 which leads to an underflow in the calculation of the args index, curn. -The fix is to add a check to ensure the extracted argument position is -greater than 0 before computing curn. Additionally, replace one -grub_strtoull() with grub_strtoul() and change curn type to make code -more correct. - -Fixes: CID 473841 - -Signed-off-by: Lidong Chen -Reviewed-by: Daniel Kiper -Upstream: a8d6b06331a75d75b46f3dd6cc6fcd40dcf604b7 -Signed-off-by: Thomas Petazzoni ---- - grub-core/kern/misc.c | 9 +++++++-- - 1 file changed, 7 insertions(+), 2 deletions(-) - -diff --git a/grub-core/kern/misc.c b/grub-core/kern/misc.c -index 7cee5d75c..2b7922393 100644 ---- a/grub-core/kern/misc.c -+++ b/grub-core/kern/misc.c -@@ -830,7 +830,7 @@ parse_printf_arg_fmt (const char *fmt0, struct printf_args *args, - while ((c = *fmt++) != 0) - { - int longfmt = 0; -- grub_size_t curn; -+ unsigned long curn; - const char *p; - - if (c != '%') -@@ -848,7 +848,10 @@ parse_printf_arg_fmt (const char *fmt0, struct printf_args *args, - - if (*fmt == '$') - { -- curn = grub_strtoull (p, 0, 10) - 1; -+ curn = grub_strtoul (p, 0, 10); -+ if (curn == 0) -+ continue; -+ curn--; - fmt++; - } - -@@ -1034,6 +1037,8 @@ grub_vsnprintf_real (char *str, grub_size_t max_len, const char *fmt0, - - if (*fmt == '$') - { -+ if (format1 == 0) -+ continue; - curn = format1 - 1; - fmt++; - format1 = 0; --- -2.50.1 - diff --git a/boot/grub2/0067-loader-i386-linux-Cast-left-shift-to-grub_uint32_t.patch b/boot/grub2/0067-loader-i386-linux-Cast-left-shift-to-grub_uint32_t.patch deleted file mode 100644 index 7cdef992beb..00000000000 --- a/boot/grub2/0067-loader-i386-linux-Cast-left-shift-to-grub_uint32_t.patch +++ /dev/null @@ -1,35 +0,0 @@ -From 3668d0c12b0604d08cf290529797c348a59483ea Mon Sep 17 00:00:00 2001 -From: Alec Brown -Date: Fri, 7 Feb 2025 01:47:57 +0000 -Subject: [PATCH] loader/i386/linux: Cast left shift to grub_uint32_t - -The Coverity complains that we might overflow into a negative value when -setting linux_params.kernel_alignment to (1 << align). We can remedy -this by casting it to grub_uint32_t. - -Fixes: CID 473876 - -Signed-off-by: Alec Brown -Reviewed-by: Daniel Kiper -Upstream: 490a6ab71cebd96fae7a1ceb9067484f5ccbec2a -Signed-off-by: Thomas Petazzoni ---- - grub-core/loader/i386/linux.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/grub-core/loader/i386/linux.c b/grub-core/loader/i386/linux.c -index 977757f2c..b051600c8 100644 ---- a/grub-core/loader/i386/linux.c -+++ b/grub-core/loader/i386/linux.c -@@ -806,7 +806,7 @@ grub_cmd_linux (grub_command_t cmd __attribute__ ((unused)), - } - - linux_params.code32_start = prot_mode_target + lh.code32_start - GRUB_LINUX_BZIMAGE_ADDR; -- linux_params.kernel_alignment = (1 << align); -+ linux_params.kernel_alignment = ((grub_uint32_t) 1 << align); - linux_params.ps_mouse = linux_params.padding11 = 0; - linux_params.type_of_loader = GRUB_LINUX_BOOT_LOADER_TYPE; - --- -2.50.1 - diff --git a/boot/grub2/0068-loader-i386-bsd-Use-safe-math-to-avoid-underflow.patch b/boot/grub2/0068-loader-i386-bsd-Use-safe-math-to-avoid-underflow.patch deleted file mode 100644 index e9a7acc0845..00000000000 --- a/boot/grub2/0068-loader-i386-bsd-Use-safe-math-to-avoid-underflow.patch +++ /dev/null @@ -1,61 +0,0 @@ -From 02a0365799f5ca3d70c4e28b5d11ade56c4c1652 Mon Sep 17 00:00:00 2001 -From: Alec Brown -Date: Wed, 5 Feb 2025 22:04:08 +0000 -Subject: [PATCH] loader/i386/bsd: Use safe math to avoid underflow - -The operation kern_end - kern_start may underflow when we input it into -grub_relocator_alloc_chunk_addr() call. To avoid this we can use safe -math for this subtraction. - -Fixes: CID 73845 - -Signed-off-by: Alec Brown -Reviewed-by: Daniel Kiper -Upstream: 4dc6166571645780c459dde2cdc1b001a5ec844c -Signed-off-by: Thomas Petazzoni ---- - grub-core/loader/i386/bsd.c | 14 ++++++++++---- - 1 file changed, 10 insertions(+), 4 deletions(-) - -diff --git a/grub-core/loader/i386/bsd.c b/grub-core/loader/i386/bsd.c -index 1f9128f6f..578433402 100644 ---- a/grub-core/loader/i386/bsd.c -+++ b/grub-core/loader/i386/bsd.c -@@ -1340,6 +1340,7 @@ static grub_err_t - grub_bsd_load_elf (grub_elf_t elf, const char *filename) - { - grub_err_t err; -+ grub_size_t sz; - - kern_end = 0; - kern_start = ~0; -@@ -1370,8 +1371,11 @@ grub_bsd_load_elf (grub_elf_t elf, const char *filename) - - if (grub_errno) - return grub_errno; -- err = grub_relocator_alloc_chunk_addr (relocator, &ch, -- kern_start, kern_end - kern_start); -+ -+ if (grub_sub (kern_end, kern_start, &sz)) -+ return grub_error (GRUB_ERR_OUT_OF_RANGE, "underflow detected while determining size of kernel for relocator"); -+ -+ err = grub_relocator_alloc_chunk_addr (relocator, &ch, kern_start, sz); - if (err) - return err; - -@@ -1431,8 +1435,10 @@ grub_bsd_load_elf (grub_elf_t elf, const char *filename) - { - grub_relocator_chunk_t ch; - -- err = grub_relocator_alloc_chunk_addr (relocator, &ch, kern_start, -- kern_end - kern_start); -+ if (grub_sub (kern_end, kern_start, &sz)) -+ return grub_error (GRUB_ERR_OUT_OF_RANGE, "underflow detected while determining size of kernel for relocator"); -+ -+ err = grub_relocator_alloc_chunk_addr (relocator, &ch, kern_start, sz); - if (err) - return err; - kern_chunk_src = get_virtual_current_address (ch); --- -2.50.1 - diff --git a/boot/grub2/0069-fs-ext2-Rework-out-of-bounds-read-for-inline-and-ext.patch b/boot/grub2/0069-fs-ext2-Rework-out-of-bounds-read-for-inline-and-ext.patch deleted file mode 100644 index f39210c0c69..00000000000 --- a/boot/grub2/0069-fs-ext2-Rework-out-of-bounds-read-for-inline-and-ext.patch +++ /dev/null @@ -1,69 +0,0 @@ -From 156ee67f3e76aee99d6e40e5e029f56d681cb80a Mon Sep 17 00:00:00 2001 -From: Michael Chang -Date: Fri, 21 Feb 2025 09:06:12 +0800 -Subject: [PATCH] fs/ext2: Rework out-of-bounds read for inline and external - extents - -Previously, the number of extent entries was not properly capped based -on the actual available space. This could lead to insufficient reads for -external extents, since the computation was based solely on the inline -extent layout. - -In this patch, when processing the extent header, we determine whether -the header is stored inline (i.e., at inode->blocks.dir_blocks) or in an -external extent block. We then clamp the number of entries accordingly -(using max_inline_ext for inline extents and max_external_ext for -external extent blocks). - -This change ensures that only the valid number of extent entries is -processed, preventing out-of-bound reads and potential filesystem -corruption. - -Fixes: 7e2f750f0a (fs/ext2: Fix out-of-bounds read for inline extents) - -Signed-off-by: Michael Chang -Upstream: 348cd416a3574348f4255bf2b04ec95938990997 -Signed-off-by: Thomas Petazzoni ---- - grub-core/fs/ext2.c | 17 +++++++++++++++-- - 1 file changed, 15 insertions(+), 2 deletions(-) - -diff --git a/grub-core/fs/ext2.c b/grub-core/fs/ext2.c -index c3058f7e7..a38c86c4f 100644 ---- a/grub-core/fs/ext2.c -+++ b/grub-core/fs/ext2.c -@@ -496,7 +496,10 @@ grub_ext2_read_block (grub_fshelp_node_t node, grub_disk_addr_t fileblock) - int i; - grub_disk_addr_t ret; - grub_uint16_t nent; -+ /* maximum number of extent entries in the inode's inline extent area */ - const grub_uint16_t max_inline_ext = sizeof (inode->blocks) / sizeof (*ext) - 1; /* Minus 1 extent header. */ -+ /* maximum number of extent entries in the external extent block */ -+ const grub_uint16_t max_external_ext = EXT2_BLOCK_SIZE(data) / sizeof (*ext) - 1; /* Minus 1 extent header. */ - - if (grub_ext4_find_leaf (data, (struct grub_ext4_extent_header *) inode->blocks.dir_blocks, - fileblock, &leaf) != GRUB_ERR_NONE) -@@ -513,8 +516,18 @@ grub_ext2_read_block (grub_fshelp_node_t node, grub_disk_addr_t fileblock) - - nent = grub_le_to_cpu16 (leaf->entries); - -- if (leaf->depth == 0) -- nent = grub_min (nent, max_inline_ext); -+ /* -+ * Determine the effective number of extent entries (nent) to process: -+ * If the extent header (leaf) is stored inline in the inode's block -+ * area (i.e. at inode->blocks.dir_blocks), then only max_inline_ext -+ * entries can fit. -+ * Otherwise, if the header was read from an external extent block, use -+ * the larger limit, max_external_ext, based on the full block size. -+ */ -+ if (leaf == (struct grub_ext4_extent_header *) inode->blocks.dir_blocks) -+ nent = grub_min (nent, max_inline_ext); -+ else -+ nent = grub_min (nent, max_external_ext); - - for (i = 0; i < nent; i++) - { --- -2.50.1 - diff --git a/boot/grub2/0070-fs-xfs-Fix-grub_xfs_iterate_dir-return-value-in-case.patch b/boot/grub2/0070-fs-xfs-Fix-grub_xfs_iterate_dir-return-value-in-case.patch deleted file mode 100644 index 3a5769e6cc9..00000000000 --- a/boot/grub2/0070-fs-xfs-Fix-grub_xfs_iterate_dir-return-value-in-case.patch +++ /dev/null @@ -1,53 +0,0 @@ -From f5234334c2c5958a55c2bdfbcaf63b6814d31d5f Mon Sep 17 00:00:00 2001 -From: Egor Ignatov -Date: Thu, 23 Jan 2025 20:44:14 +0300 -Subject: [PATCH] fs/xfs: Fix grub_xfs_iterate_dir return value in case of - failure - -Commit ef7850c757 introduced multiple boundary checks in grub_xfs_iterate_dir() -but handled the error incorrectly returning error code instead of 0. - -Also change the error message so that it doesn't match the message -in grub_xfs_read_inode(). - -Fixes: ef7850c757 (fs/xfs: Fix issues found while fuzzing the XFS filesystem) - -Signed-off-by: Egor Ignatov -Upstream: f209887381a56dea79152ab26ffb485718e3218e -Signed-off-by: Thomas Petazzoni ---- - grub-core/fs/xfs.c | 11 +++++++++-- - 1 file changed, 9 insertions(+), 2 deletions(-) - -diff --git a/grub-core/fs/xfs.c b/grub-core/fs/xfs.c -index 70c9f449b..e0daeb45f 100644 ---- a/grub-core/fs/xfs.c -+++ b/grub-core/fs/xfs.c -@@ -870,7 +870,11 @@ grub_xfs_iterate_dir (grub_fshelp_node_t dir, - grub_uint8_t c; - - if ((inopos + (smallino ? 4 : 8)) > (grub_uint8_t *) dir + grub_xfs_fshelp_size (dir->data)) -- return grub_error (GRUB_ERR_BAD_FS, "not a correct XFS inode"); -+ { -+ grub_error (GRUB_ERR_BAD_FS, "invalid XFS inode"); -+ return 0; -+ } -+ - - /* inopos might be unaligned. */ - if (smallino) -@@ -979,7 +983,10 @@ grub_xfs_iterate_dir (grub_fshelp_node_t dir, - - filename = (char *)(direntry + 1); - if (filename + direntry->len + 1 > (char *) end) -- return grub_error (GRUB_ERR_BAD_FS, "invalid XFS directory entry"); -+ { -+ grub_error (GRUB_ERR_BAD_FS, "invalid XFS directory entry"); -+ return 0; -+ } - - /* The byte after the filename is for the filetype, padding, or - tag, which is not used by GRUB. So it can be overwritten. */ --- -2.50.1 - diff --git a/boot/grub2/0071-fs-xfs-Propagate-incorrect-inode-error-from-grub_xfs.patch b/boot/grub2/0071-fs-xfs-Propagate-incorrect-inode-error-from-grub_xfs.patch deleted file mode 100644 index 05e31957c57..00000000000 --- a/boot/grub2/0071-fs-xfs-Propagate-incorrect-inode-error-from-grub_xfs.patch +++ /dev/null @@ -1,77 +0,0 @@ -From 6becb747027c4f9cdb10f23d6eb24fcc238e8b68 Mon Sep 17 00:00:00 2001 -From: Egor Ignatov -Date: Thu, 23 Jan 2025 20:44:15 +0300 -Subject: [PATCH] fs/xfs: Propagate incorrect inode error from - grub_xfs_read_inode - -The incorrect inode error from grub_xfs_read_inode did not propagate because -grub_print_error() resetted grub_errno, and grub_xfs_iterate_dir() did not -handle it at all. - -Signed-off-by: Egor Ignatov -Upstream: https://www.mail-archive.com/grub-devel@gnu.org/msg40098.html -[Not accepted upstream, but in Debian] -Signed-off-by: Thomas Petazzoni ---- - grub-core/fs/xfs.c | 14 ++++++++++++-- - 1 file changed, 12 insertions(+), 2 deletions(-) - -diff --git a/grub-core/fs/xfs.c b/grub-core/fs/xfs.c -index e0daeb45f..28a342996 100644 ---- a/grub-core/fs/xfs.c -+++ b/grub-core/fs/xfs.c -@@ -806,7 +806,6 @@ static int iterate_dir_call_hook (grub_uint64_t ino, const char *filename, - fdiro = grub_malloc (sz); - if (!fdiro) - { -- grub_print_error (); - return 0; - } - -@@ -818,7 +817,6 @@ static int iterate_dir_call_hook (grub_uint64_t ino, const char *filename, - err = grub_xfs_read_inode (ctx->diro->data, ino, &fdiro->inode); - if (err) - { -- grub_print_error (); - grub_free (fdiro); - return 0; - } -@@ -858,9 +856,13 @@ grub_xfs_iterate_dir (grub_fshelp_node_t dir, - /* Synthesize the direntries for `.' and `..'. */ - if (iterate_dir_call_hook (diro->ino, ".", &ctx)) - return 1; -+ else if (grub_errno) -+ return 0; - - if (iterate_dir_call_hook (parent, "..", &ctx)) - return 1; -+ else if (grub_errno) -+ return 0; - - for (i = 0; i < head->count && - (grub_uint8_t *) de < ((grub_uint8_t *) dir + grub_xfs_fshelp_size (dir->data)); i++) -@@ -901,6 +903,9 @@ grub_xfs_iterate_dir (grub_fshelp_node_t dir, - } - de->name[de->len] = c; - -+ if (grub_errno) -+ return 0; -+ - de = grub_xfs_inline_next_de(dir->data, head, de); - } - break; -@@ -998,6 +1003,11 @@ grub_xfs_iterate_dir (grub_fshelp_node_t dir, - grub_free (dirblock); - return 1; - } -+ else if (grub_errno) -+ { -+ grub_free (dirblock); -+ return 0; -+ } - - /* - * The expected number of directory entries is only tracked for the --- -2.50.1 - diff --git a/boot/grub2/0072-fs-xfs-Handle-root-inode-read-failure-in-grub_xfs_mo.patch b/boot/grub2/0072-fs-xfs-Handle-root-inode-read-failure-in-grub_xfs_mo.patch deleted file mode 100644 index 2d5887dfca9..00000000000 --- a/boot/grub2/0072-fs-xfs-Handle-root-inode-read-failure-in-grub_xfs_mo.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 462f1d1a64e57310d10dcd325b36587a1a367d0a Mon Sep 17 00:00:00 2001 -From: Egor Ignatov -Date: Thu, 23 Jan 2025 20:44:13 +0300 -Subject: [PATCH] fs/xfs: Handle root inode read failure in grub_xfs_mount - -Signed-off-by: Egor Ignatov -Upstream: https://www.mail-archive.com/grub-devel@gnu.org/msg40099.html -[Not accepted upstream, but in Debian] -Signed-off-by: Thomas Petazzoni ---- - grub-core/fs/xfs.c | 2 ++ - 1 file changed, 2 insertions(+) - -diff --git a/grub-core/fs/xfs.c b/grub-core/fs/xfs.c -index 28a342996..59bdee5f9 100644 ---- a/grub-core/fs/xfs.c -+++ b/grub-core/fs/xfs.c -@@ -1086,6 +1086,8 @@ grub_xfs_mount (grub_disk_t disk) - grub_cpu_to_be64(data->sblock.rootino)); - - grub_xfs_read_inode (data, data->diropen.ino, &data->diropen.inode); -+ if (grub_errno) -+ goto fail; - - return data; - fail: --- -2.50.1 - diff --git a/boot/grub2/0073-net-drivers-ieee1275-ofnet-Add-missing-grub_malloc.patch b/boot/grub2/0073-net-drivers-ieee1275-ofnet-Add-missing-grub_malloc.patch deleted file mode 100644 index 97bad8c6358..00000000000 --- a/boot/grub2/0073-net-drivers-ieee1275-ofnet-Add-missing-grub_malloc.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 516af0a5bd172123d4c7ff281d65b1f4b0035258 Mon Sep 17 00:00:00 2001 -From: Nicolas Frayer -Date: Wed, 19 Mar 2025 17:39:41 +0100 -Subject: [PATCH] net/drivers/ieee1275/ofnet: Add missing grub_malloc() - -The grub_malloc() has been inadvertently removed from the code after it -has been modified to use safe math functions. - -Fixes: 4beeff8a (net: Use safe math macros to prevent overflows) - -Signed-off-by: Nicolas Frayer -Tested-by: Marta Lewandowska -Reviewed-by: Daniel Kiper -Upstream: 3b25e494d47e7a728e7ce6264b10f2aa1063f9c7 -Signed-off-by: Thomas Petazzoni ---- - grub-core/net/drivers/ieee1275/ofnet.c | 3 +++ - 1 file changed, 3 insertions(+) - -diff --git a/grub-core/net/drivers/ieee1275/ofnet.c b/grub-core/net/drivers/ieee1275/ofnet.c -index c35b107ad..3004b970e 100644 ---- a/grub-core/net/drivers/ieee1275/ofnet.c -+++ b/grub-core/net/drivers/ieee1275/ofnet.c -@@ -467,6 +467,9 @@ search_net_devices (struct grub_ieee1275_devalias *alias) - return 0; - } - } -+ -+ ofdata->path = grub_malloc (sz); -+ - if (!ofdata->path) - { - grub_print_error (); --- -2.50.1 - diff --git a/boot/grub2/0074-Constant-time-grub_crypto_memcmp.patch b/boot/grub2/0074-Constant-time-grub_crypto_memcmp.patch deleted file mode 100644 index 7449e081911..00000000000 --- a/boot/grub2/0074-Constant-time-grub_crypto_memcmp.patch +++ /dev/null @@ -1,63 +0,0 @@ -From 4bbd6ae38efc7c0ae9ffd343157b7f3f37bd729c Mon Sep 17 00:00:00 2001 -From: Gary Lin -Date: Fri, 25 Jul 2025 13:50:23 +0800 -Subject: [PATCH] Constant-time grub_crypto_memcmp() - -Use the constant-time algorithm to compare the given memory blocks. -The code is extracted from the upstream commit: -0739d24cd1648531d0708d1079ff6bbfa6140268 - -Fix: bsc#1234959 - -Signed-off-by: Gary Lin -Upstream: not submitted upstream, as upstream has switched to gcrypt -Taken-from: https://build.opensuse.org/projects/SUSE:SLE-15-SP5:Update/packages/grub2.39923/files/grub2-constant-time-grub_crypto_memcmp.patch?expand=0 -Fixes: https://www.cve.org/CVERecord?id=CVE-2024-56738 -Signed-off-by: Thomas Petazzoni ---- - grub-core/lib/crypto.c | 23 ++++++++++++++++------- - 1 file changed, 16 insertions(+), 7 deletions(-) - -diff --git a/grub-core/lib/crypto.c b/grub-core/lib/crypto.c -index 396f76410..19db7870a 100644 ---- a/grub-core/lib/crypto.c -+++ b/grub-core/lib/crypto.c -@@ -433,19 +433,28 @@ grub_crypto_gcry_error (gcry_err_code_t in) - return GRUB_ACCESS_DENIED; - } - -+/* -+ * Compare byte arrays of length LEN, return 1 if it's not same, -+ * 0, otherwise. -+ */ - int --grub_crypto_memcmp (const void *a, const void *b, grub_size_t n) -+grub_crypto_memcmp (const void *b1, const void *b2, grub_size_t len) - { -- register grub_size_t counter = 0; -- const grub_uint8_t *pa, *pb; -+ const grub_uint8_t *a = b1; -+ const grub_uint8_t *b = b2; -+ int ab, ba; -+ grub_size_t i; - -- for (pa = a, pb = b; n; pa++, pb++, n--) -+ /* Constant-time compare. */ -+ for (i = 0, ab = 0, ba = 0; i < len; i++) - { -- if (*pa != *pb) -- counter++; -+ /* If a[i] != b[i], either ab or ba will be negative. */ -+ ab |= a[i] - b[i]; -+ ba |= b[i] - a[i]; - } - -- return !!counter; -+ /* 'ab | ba' is negative when buffers are not equal, extract sign bit. */ -+ return ((unsigned int)(ab | ba) >> (sizeof(unsigned int) * 8 - 1)) & 1; - } - - #ifndef GRUB_UTIL --- -2.50.1 - diff --git a/boot/grub2/Config.in b/boot/grub2/Config.in index 3a50ec0ad74..8cd56cad00a 100644 --- a/boot/grub2/Config.in +++ b/boot/grub2/Config.in @@ -118,7 +118,7 @@ config BR2_TARGET_GRUB2_LOONGARCH64_EFI depends on BR2_loongarch64 select BR2_TARGET_GRUB2_HAS_EFI_BOOT help - Select this option if the platform you're targetting is a + Select this option if the platform you're targeting is a 64bit LoongArch platform and you want to boot Grub 2 as an EFI application. diff --git a/boot/grub2/grub2.hash b/boot/grub2/grub2.hash index 65a8ec8e4f5..cf46011359d 100644 --- a/boot/grub2/grub2.hash +++ b/boot/grub2/grub2.hash @@ -1,5 +1,5 @@ # Locally calculated after checking signature -# https://ftp.gnu.org/gnu/grub/grub-2.12.tar.xz.sig -sha256 f3c97391f7c4eaa677a78e090c7e97e6dc47b16f655f04683ebd37bef7fe0faa grub-2.12.tar.xz +# https://gitlab.freedesktop.org/api/v4/projects/26558/packages/generic/source-assets/grub-2.16/grub-2.16.tar.xz.sig +sha256 f0db0104927df0b9a48bc41b735c702936190d17eb2d73d3018fa77474a0cabe grub-2.16.tar.xz # Locally computed: sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING diff --git a/boot/grub2/grub2.mk b/boot/grub2/grub2.mk index 1ed9a252685..76da6af3664 100644 --- a/boot/grub2/grub2.mk +++ b/boot/grub2/grub2.mk @@ -4,8 +4,8 @@ # ################################################################################ -GRUB2_VERSION = 2.12 -GRUB2_SITE = $(BR2_GNU_MIRROR)/grub +GRUB2_VERSION = 2.16 +GRUB2_SITE = https://gitlab.freedesktop.org/api/v4/projects/26558/packages/generic/source-assets/grub-$(GRUB2_VERSION) GRUB2_SOURCE = grub-$(GRUB2_VERSION).tar.xz GRUB2_LICENSE = GPL-3.0+ GRUB2_LICENSE_FILES = COPYING @@ -15,47 +15,12 @@ HOST_GRUB2_DEPENDENCIES = host-bison host-flex host-gawk \ $(BR2_PYTHON3_HOST_DEPENDENCY) GRUB2_INSTALL_IMAGES = YES -# CVE-2019-14865 is about a flaw in the grub2-set-bootflag tool, which -# doesn't exist upstream, but is added by the Redhat/Fedora -# packaging. Not applicable to Buildroot. -GRUB2_IGNORE_CVES += CVE-2019-14865 -# vulnerability is specific to the Redhat distribution, affects a -# downstream change from Redhat related to password authentication -GRUB2_IGNORE_CVES += CVE-2023-4001 -# vulnerability is specific to the Redhat distribution, affects the -# grub2-set-bootflag tool, which doesn't exist upstream -GRUB2_IGNORE_CVES += CVE-2024-1048 - -# 0004-fs-hfs-Fix-stack-OOB-write-with-grub_strcpy.patch (yes, two -# CVEs are fixed by this patch) -GRUB2_IGNORE_CVES += CVE-2024-45782 -GRUB2_IGNORE_CVES += CVE-2024-56737 - -# 0006-fs-tar-Integer-overflow-leads-to-heap-OOB-write.patch -GRUB2_IGNORE_CVES += CVE-2024-45780 - -# 0037-gettext-Integer-overflow-leads-to-heap-OOB-write.patch -GRUB2_IGNORE_CVES += CVE-2024-45777 - -# 0043-fs-bfs-Disable-under-lockdown.patch (yes, two CVEs are fixed by -# this patch) -GRUB2_IGNORE_CVES += CVE-2024-45778 -GRUB2_IGNORE_CVES += CVE-2024-45779 - -# 0044-fs-Disable-many-filesystems-under-lockdown.patch (yes, four -# CVEs are fixed by this patch) -GRUB2_IGNORE_CVES += CVE-2025-0684 -GRUB2_IGNORE_CVES += CVE-2025-0685 -GRUB2_IGNORE_CVES += CVE-2025-0686 -GRUB2_IGNORE_CVES += CVE-2025-0689 - -# 0050-fs-Prevent-overflows-when-allocating-memory-for-arra.patch -# (yes, two CVEs are fixed by this patch) -GRUB2_IGNORE_CVES += CVE-2025-0678 -GRUB2_IGNORE_CVES += CVE-2025-1125 - -# 0074-Constant-time-grub_crypto_memcmp.patch -GRUB2_IGNORE_CVES += CVE-2024-56738 +# 0001-Revert-configure-Check-linker-for-image-base-support.patch +# 0002-Revert-configure-Print-a-more-helpful-error-if-autoc.patch +# Target grub2 package doesn't use autotools-package +GRUB2_DEPENDENCIES += host-automake host-autoconf host-libtool host-pkgconf +HOST_GRUB2_AUTORECONF = YES +HOST_GRUB2_DEPENDENCIES += host-pkgconf ifeq ($(BR2_TARGET_GRUB2_INSTALL_TOOLS),y) GRUB2_INSTALL_TARGET = YES @@ -174,6 +139,7 @@ HOST_GRUB2_CONF_OPTS = \ --disable-werror define GRUB2_CONFIGURE_CMDS + cd $(@D); $(AUTORECONF) $(foreach tuple, $(GRUB2_TUPLES-y), \ @$(call MESSAGE,Configuring $(tuple)) mkdir -p $(@D)/build-$(tuple) diff --git a/boot/opensbi/Config.in b/boot/opensbi/Config.in index 9c6047df5e6..6e26da63449 100644 --- a/boot/opensbi/Config.in +++ b/boot/opensbi/Config.in @@ -19,7 +19,7 @@ choice Select the specific OpenSBI version you want to use config BR2_TARGET_OPENSBI_LATEST_VERSION - bool "1.7" + bool "Latest version (1.8.1)" config BR2_TARGET_OPENSBI_CUSTOM_VERSION bool "Custom version" @@ -57,13 +57,21 @@ endif config BR2_TARGET_OPENSBI_VERSION string - default "1.7" if BR2_TARGET_OPENSBI_LATEST_VERSION + default "1.8.1" if BR2_TARGET_OPENSBI_LATEST_VERSION default BR2_TARGET_OPENSBI_CUSTOM_VERSION_VALUE \ if BR2_TARGET_OPENSBI_CUSTOM_VERSION default "custom" if BR2_TARGET_OPENSBI_CUSTOM_TARBALL default BR2_TARGET_OPENSBI_CUSTOM_REPO_VERSION \ if BR2_TARGET_OPENSBI_CUSTOM_GIT +config BR2_TARGET_OPENSBI_LICENSE_FILES + string "OpenSBI license files" if BR2_TARGET_OPENSBI_CUSTOM_GIT || \ + BR2_TARGET_OPENSBI_CUSTOM_TARBALL + default "COPYING.BSD" + help + A space-separated list of license files related to the OpenSBI + package. + config BR2_TARGET_OPENSBI_PLAT string "OpenSBI Platform" default "" diff --git a/boot/opensbi/opensbi.hash b/boot/opensbi/opensbi.hash index c82d2de236e..661f08189ea 100644 --- a/boot/opensbi/opensbi.hash +++ b/boot/opensbi/opensbi.hash @@ -1,3 +1,3 @@ # locally computed -sha256 2cf856a4e5e2e052948ddb54ba48232b1f698b7f52e0374fc7d17d51e8c8f7ce opensbi-1.7.tar.gz +sha256 fb1ae61a85e966322101acb1c982f84d9eaafc4de7dd474a7d7546d9bb321c6f opensbi-1.8.1.tar.gz sha256 82d13fb1bf6bb162629deeea9eb9c117e74548d3b707e478967691fe79a68e21 COPYING.BSD diff --git a/boot/opensbi/opensbi.mk b/boot/opensbi/opensbi.mk index 0142769a127..f9f550176f9 100644 --- a/boot/opensbi/opensbi.mk +++ b/boot/opensbi/opensbi.mk @@ -20,9 +20,7 @@ OPENSBI_SITE = $(call github,riscv-software-src,opensbi,v$(OPENSBI_VERSION)) endif OPENSBI_LICENSE = BSD-2-Clause -ifeq ($(BR2_TARGET_OPENSBI_LATEST_VERSION),y) -OPENSBI_LICENSE_FILES = COPYING.BSD -endif +OPENSBI_LICENSE_FILES = $(call qstrip,$(BR2_TARGET_OPENSBI_LICENSE_FILES)) OPENSBI_INSTALL_TARGET = NO OPENSBI_INSTALL_STAGING = YES diff --git a/boot/optee-os/Config.in b/boot/optee-os/Config.in index 433dae90d8b..af08375b9ac 100644 --- a/boot/optee-os/Config.in +++ b/boot/optee-os/Config.in @@ -18,7 +18,7 @@ choice Select the version of OP-TEE OS you want to use config BR2_TARGET_OPTEE_OS_LATEST - bool "4.6.0" + bool "4.9.0" depends on BR2_PACKAGE_HOST_RUSTC_ARCH_SUPPORTS select BR2_TARGET_OPTEE_OS_NEEDS_PYTHON_CRYPTOGRAPHY help @@ -79,13 +79,21 @@ endif config BR2_TARGET_OPTEE_OS_VERSION string - default "4.6.0" if BR2_TARGET_OPTEE_OS_LATEST + default "4.9.0" if BR2_TARGET_OPTEE_OS_LATEST default BR2_TARGET_OPTEE_OS_CUSTOM_VERSION_VALUE \ if BR2_TARGET_OPTEE_OS_CUSTOM_VERSION default "custom" if BR2_TARGET_OPTEE_OS_CUSTOM_TARBALL default BR2_TARGET_OPTEE_OS_CUSTOM_REPO_VERSION \ if BR2_TARGET_OPTEE_OS_CUSTOM_GIT +config BR2_TARGET_OPTEE_OS_LICENSE_FILES + string "OP-TEE OS license files" if BR2_TARGET_OPTEE_OS_CUSTOM_GIT || \ + BR2_TARGET_OPTEE_OS_CUSTOM_TARBALL + default "LICENSE" + help + A space-separated list of license files related to the + OPTEE-OS package. + config BR2_TARGET_OPTEE_OS_NEEDS_DTC bool "OP-TEE OS needs dtc" select BR2_PACKAGE_HOST_DTC @@ -167,7 +175,7 @@ config BR2_TARGET_OPTEE_OS_ADDITIONAL_VARIABLES config BR2_TARGET_OPTEE_OS_CORE_IMAGES string "Binary boot images" - default "tee.bin tee-*_v2.bin" + default "tee.bin tee-raw.bin tee-*_v2.bin" help Names of generated image files that are installed in the output images/ directory. diff --git a/boot/optee-os/optee-os.hash b/boot/optee-os/optee-os.hash index c86bd1e0d99..3db5c85cf17 100644 --- a/boot/optee-os/optee-os.hash +++ b/boot/optee-os/optee-os.hash @@ -1,3 +1,3 @@ # Locally computed -sha256 0c947c6972bf50c483cb993af01041d4094b1e03711c7246cdde6ba2ffc351fe optee-os-4.6.0.tar.gz +sha256 9400e16c45bfa45f15585b2c933b86c449e7de05def0ecaaa62a4f38973a3a45 optee-os-4.9.0.tar.gz sha256 1247ee90858f4037b6cac63cbffddfed435d0d73c631b37d78c1e6e6ab3e5d1a LICENSE diff --git a/boot/optee-os/optee-os.mk b/boot/optee-os/optee-os.mk index c59fde38605..6be15a83ef7 100644 --- a/boot/optee-os/optee-os.mk +++ b/boot/optee-os/optee-os.mk @@ -6,10 +6,10 @@ OPTEE_OS_VERSION = $(call qstrip,$(BR2_TARGET_OPTEE_OS_VERSION)) OPTEE_OS_LICENSE = BSD-2-Clause -OPTEE_OS_LICENSE_FILES = LICENSE +OPTEE_OS_LICENSE_FILES = $(call qstrip,$(BR2_TARGET_OPTEE_OS_LICENSE_FILES)) OPTEE_OS_CPE_ID_PREFIX = cpe:2.3:o -OPTEE_OS_CPE_ID_VENDOR = linaro +OPTEE_OS_CPE_ID_VENDOR = trustedfirmware OPTEE_OS_CPE_ID_PRODUCT = op-tee OPTEE_OS_INSTALL_STAGING = YES diff --git a/boot/palo/Config.in b/boot/palo/Config.in new file mode 100644 index 00000000000..34e2d5bf005 --- /dev/null +++ b/boot/palo/Config.in @@ -0,0 +1,13 @@ +config BR2_TARGET_PALO + bool "palo" + depends on BR2_hppa + help + Palo is a PA-RISC/Linux boot loader. + + It comprises iplboot, a bootloader loaded by the HP firmware, + and palo, a boot media management tool. + + Palo allows to update disk images with a bootloader to make + them bootable, or to create network bootable images. + + https://parisc.docs.kernel.org diff --git a/boot/palo/palo.hash b/boot/palo/palo.hash new file mode 100644 index 00000000000..9019d00f04d --- /dev/null +++ b/boot/palo/palo.hash @@ -0,0 +1,3 @@ +# Locally calculated +sha256 bca096116d403b7d370794d84853c4f4a4703d604c01a645d1fbd1c5be42a7e0 palo-2.29.tar.gz +sha256 fa5fc1d1eec39532ea517518eeefd7b6e3c14341a55e5880a0e2a49eee47a5b7 COPYING diff --git a/boot/palo/palo.mk b/boot/palo/palo.mk new file mode 100644 index 00000000000..d2761042f55 --- /dev/null +++ b/boot/palo/palo.mk @@ -0,0 +1,25 @@ +################################################################################ +# +# palo +# +################################################################################ + +PALO_VERSION = 2.29 +PALO_SITE = https://git.kernel.org/pub/scm/linux/kernel/git/deller/palo.git/snapshot +PALO_LICENSE = GPL-2.0 +PALO_LICENSE_FILES = COPYING +PALO_INSTALL_IMAGES = YES + +define PALO_BUILD_CMDS + # Dummy README to remove the dependency on lynx. + touch $(@D)/README + $(TARGET_MAKE_ENV) $(MAKE) -C $(@D) \ + CROSS_COMPILE=$(TARGET_CROSS) all makeipl +endef + +define PALO_INSTALL_IMAGES_CMDS + $(INSTALL) -D -m 0644 $(@D)/iplboot $(BINARIES_DIR)/iplboot + $(INSTALL) -D -m 0755 $(@D)/palo/palo $(HOST_DIR)/bin/palo +endef + +$(eval $(generic-package)) diff --git a/boot/s500-bootloader/Config.in b/boot/s500-bootloader/Config.in deleted file mode 100644 index 7bb689f305b..00000000000 --- a/boot/s500-bootloader/Config.in +++ /dev/null @@ -1,17 +0,0 @@ -config BR2_TARGET_S500_BOOTLOADER - bool "s500-bootloader" - depends on BR2_arm - depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86" - select BR2_HOSTARCH_NEEDS_IA32_LIBS - help - 1st level bootloader for Actions Semiconductor S500 SoC. - - https://github.com/xapp-le/owl - -config BR2_TARGET_S500_BOOTLOADER_BOARD - string "board to configure for" - depends on BR2_TARGET_S500_BOOTLOADER - help - Specify the board to configure the bootloader for. - This should be the name of a directory under s500/boards - containing a suitable bootloader.ini file. diff --git a/boot/s500-bootloader/s500-bootloader.hash b/boot/s500-bootloader/s500-bootloader.hash deleted file mode 100644 index 2ebd933e523..00000000000 --- a/boot/s500-bootloader/s500-bootloader.hash +++ /dev/null @@ -1,2 +0,0 @@ -# Locally calculated -sha256 b183024ac69f51ea7befd28d03b2ec35a7280e270405600fb4f37aa91d9c9571 s500-bootloader-a8d7fa1d9a7f353ec4613febf30f4ca99a10a106.tar.gz diff --git a/boot/s500-bootloader/s500-bootloader.mk b/boot/s500-bootloader/s500-bootloader.mk deleted file mode 100644 index bc87b091c75..00000000000 --- a/boot/s500-bootloader/s500-bootloader.mk +++ /dev/null @@ -1,34 +0,0 @@ -################################################################################ -# -# s500-bootloader -# -################################################################################ - -S500_BOOTLOADER_VERSION = a8d7fa1d9a7f353ec4613febf30f4ca99a10a106 -S500_BOOTLOADER_SITE = $(call github,xapp-le,owl,$(S500_BOOTLOADER_VERSION)) -S500_BOOTLOADER_LICENSE = PROPRIETARY -S500_BOOTLOADER_INSTALL_TARGET = NO -S500_BOOTLOADER_INSTALL_IMAGES = YES - -S500_BOOTLOADER_BOARD = $(call qstrip,$(BR2_TARGET_S500_BOOTLOADER_BOARD)) - -define S500_BOOTLOADER_BUILD_CMDS - cd $(@D) && ./tools/utils/bootloader_pack \ - s500/bootloader/bootloader.bin \ - s500/boards/$(S500_BOOTLOADER_BOARD)/bootloader.ini \ - s500-bootloader.bin -endef - -define S500_BOOTLOADER_INSTALL_IMAGES_CMDS - $(INSTALL) -m 0644 -D $(@D)/s500-bootloader.bin \ - $(BINARIES_DIR)/s500-bootloader.bin -endef - -$(eval $(generic-package)) - -ifeq ($(BR2_TARGET_S500_BOOTLOADER)$(BR_BUILDING),yy) -# we NEED a board name -ifeq ($(S500_BOOTLOADER_BOARD),) -$(error No s500-bootloader board specified. Check your BR2_TARGET_S500_BOOTLOADER settings) -endif -endif diff --git a/boot/shim/0001-Fix-build-with-binutils-2.46.patch b/boot/shim/0001-Fix-build-with-binutils-2.46.patch new file mode 100644 index 00000000000..05ab7b2c834 --- /dev/null +++ b/boot/shim/0001-Fix-build-with-binutils-2.46.patch @@ -0,0 +1,51 @@ +From c4665d282072df2ed8ab6ae1d5fa0de41e5db02f Mon Sep 17 00:00:00 2001 +From: Luca Boccassi +Date: Tue, 6 Jan 2026 11:48:13 +0100 +Subject: [PATCH] Fix build with binutils 2.46 + +With the new binutils which is in development and in Fedora Rawhide: + +objcopy -D -j .text -j .sdata -j .data -j .data.ident \ + -j .dynamic -j .rodata -j .rel* \ + -j .rela* -j .dyn -j .reloc -j .eh_frame \ + -j .vendor_cert -j .sbat -j .sbatlevel \ + --file-alignment 0x1000 \ + --target efi-app-x86_64 fbx64.so fbx64.efi +objcopy: fbx64.so: file format not recognized + +It seems it was an intentional compat break, according to the upstream +commit: + +https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commit;h=5e83077d552ed6f81dbc092eb3ccf827a43de42c + +* Internal changes to plugin support, and stricter target checking may result + in some errors being exposed in user options passed to the various binutils. + For example objcopy --target=TARGET now will only work if the input file is + for TARGET whereas prior versions of objcopy accepted other target input + files and produced a TARGET output. If you do in fact want the old + behaviour the correct usage is objcopy --output-target=TARGET. + +Switch from --taget to --output-target as suggested. + +Signed-off-by: Luca Boccassi + +Upstream: https://github.com/rhboot/shim/commit/c4665d282072df2ed8ab6ae1d5fa0de41e5db02f + +Signed-off-by: Bernd Kuhls +--- + Make.defaults | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/Make.defaults b/Make.defaults +index c5fa32bec..9b40b7f4a 100644 +--- a/Make.defaults ++++ b/Make.defaults +@@ -155,7 +155,7 @@ endif + + LIB_GCC = $(shell $(CC) $(ARCH_CFLAGS) -print-libgcc-file-name) + EFI_LIBS = -lefi -lgnuefi --start-group Cryptlib/libcryptlib.a Cryptlib/OpenSSL/libopenssl.a --end-group $(LIB_GCC) +-FORMAT ?= --target efi-app-$(ARCH) ++FORMAT ?= --output-target efi-app-$(ARCH) + LOCAL_EFI_PATH = gnu-efi/$(ARCH_GNUEFI)/gnuefi + LIBDIR = gnu-efi/$(ARCH_GNUEFI)/lib + diff --git a/boot/shim/0002-cmac.c-optimize-make_kn-and-move-zero_iv-to-const-se.patch b/boot/shim/0002-cmac.c-optimize-make_kn-and-move-zero_iv-to-const-se.patch new file mode 100644 index 00000000000..2baa0de56cf --- /dev/null +++ b/boot/shim/0002-cmac.c-optimize-make_kn-and-move-zero_iv-to-const-se.patch @@ -0,0 +1,72 @@ +From 7aee873d6f6b0737dfe566fc8c5cd4eaada9bd5e Mon Sep 17 00:00:00 2001 +From: Fabrice Fontaine +Date: Mon, 8 Apr 2024 11:56:06 +0200 +Subject: [PATCH] cmac.c: optimize make_kn and move zero_iv to const segment. + +Backport +https://github.com/openssl/openssl/commit/03cf7e784caa4c61febbf249be63cbae3e368ac9 +to fix the following k1 stringop-overflow: + +In function 'make_kn', + inlined from 'make_kn' at crypto/cmac/cmac.c:81:13, + inlined from 'CMAC_Init' at crypto/cmac/cmac.c:205:9: +crypto/cmac/cmac.c:92:20: error: writing 1 byte into a region of size 0 [-Werror=stringop-overflow=] + 92 | k1[bl - 1] ^= bl == 16 ? 0x87 : 0x1b; + | ~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ +crypto/cmac/cmac.c: In function 'CMAC_Init': +crypto/cmac/cmac.c:69:19: note: at offset [-2147483649, -1] into destination object 'k1' of size 32 + 69 | unsigned char k1[EVP_MAX_BLOCK_LENGTH]; + | ^~ + +Fixes: + - http://autobuild.buildroot.org/results/97b6333cdc7bad24aba7af1b04890679e0058299 + +Upstream: https://github.com/rhboot/shim/pull/652 +Signed-off-by: Fabrice Fontaine +Signed-off-by: Peter Korsgaard +--- + Cryptlib/OpenSSL/crypto/cmac/cmac.c | 17 ++++++++--------- + 1 file changed, 8 insertions(+), 9 deletions(-) + +diff --git a/Cryptlib/OpenSSL/crypto/cmac/cmac.c b/Cryptlib/OpenSSL/crypto/cmac/cmac.c +index 2954b6eb..27dbfaac 100644 +--- a/Cryptlib/OpenSSL/crypto/cmac/cmac.c ++++ b/Cryptlib/OpenSSL/crypto/cmac/cmac.c +@@ -78,18 +78,17 @@ struct CMAC_CTX_st { + + /* Make temporary keys K1 and K2 */ + +-static void make_kn(unsigned char *k1, unsigned char *l, int bl) ++static void make_kn(unsigned char *k1, const unsigned char *l, int bl) + { + int i; ++ unsigned char c = l[0], carry = c>>7, cnext; ++ + /* Shift block to left, including carry */ +- for (i = 0; i < bl; i++) { +- k1[i] = l[i] << 1; +- if (i < bl - 1 && l[i + 1] & 0x80) +- k1[i] |= 1; +- } ++ for (i = 0; i < bl-1; i++, c = cnext) ++ k1[i] = (c << 1) | ((cnext=l[i+1]) >> 7); ++ + /* If MSB set fixup with R */ +- if (l[0] & 0x80) +- k1[bl - 1] ^= bl == 16 ? 0x87 : 0x1b; ++ k1[i] = (c << 1) ^ ((0-carry)&(bl==16?0x87:0x1b)); + } + + CMAC_CTX *CMAC_CTX_new(void) +@@ -151,7 +150,7 @@ int CMAC_CTX_copy(CMAC_CTX *out, const CMAC_CTX *in) + int CMAC_Init(CMAC_CTX *ctx, const void *key, size_t keylen, + const EVP_CIPHER *cipher, ENGINE *impl) + { +- static unsigned char zero_iv[EVP_MAX_BLOCK_LENGTH]; ++ static const unsigned char zero_iv[EVP_MAX_BLOCK_LENGTH] = {0}; + #ifdef OPENSSL_FIPS + if (FIPS_mode()) { + /* If we have an ENGINE need to allow non FIPS */ +-- +2.47.3 + diff --git a/boot/shim/shim.hash b/boot/shim/shim.hash index 14b0aa64cf4..f36abd655d0 100644 --- a/boot/shim/shim.hash +++ b/boot/shim/shim.hash @@ -1,3 +1,3 @@ # locally computed hash -sha256 d503f778dc75895d3130da07e2ff23d2393862f95b6cd3d24b10cbd4af847217 shim-16.0.tar.bz2 +sha256 46319cd228d8f2c06c744241c0f342412329a7c630436fce7f82cf6936b1d603 shim-16.1.tar.bz2 sha256 15edf527919ddcb2f514ab9d16ad07ef219e4bb490e0b79560be510f0c159cc2 COPYRIGHT diff --git a/boot/shim/shim.mk b/boot/shim/shim.mk index 0e5698b4327..1bd3fac1034 100644 --- a/boot/shim/shim.mk +++ b/boot/shim/shim.mk @@ -4,7 +4,7 @@ # ################################################################################ -SHIM_VERSION = 16.0 +SHIM_VERSION = 16.1 SHIM_SITE = https://github.com/rhboot/shim/releases/download/$(SHIM_VERSION) SHIM_SOURCE = shim-$(SHIM_VERSION).tar.bz2 SHIM_LICENSE = BSD-2-Clause diff --git a/boot/syslinux/syslinux.mk b/boot/syslinux/syslinux.mk index b8f022b189c..f938634c356 100644 --- a/boot/syslinux/syslinux.mk +++ b/boot/syslinux/syslinux.mk @@ -56,6 +56,9 @@ SYSLINUX_POST_PATCH_HOOKS += SYSLINUX_CLEANUP # syslinux build system has no convenient way to pass CFLAGS, # and the internal zlib should take precedence so -I shouldn't # be used. +# gcc-15 defaults to -std=gnu23 which introduces build failures. +# We force "-std=gnu17" for gcc version supporting it. Earlier gcc +# versions will work, since they are using the older standard. # Install in a temporary location that eases final install into # images/ (see corresponding command, below). # Repeat the target, otherwise syslinux will try to build everything @@ -65,7 +68,7 @@ define SYSLINUX_BUILD_CMDS $(TARGET_MAKE_ENV) $(MAKE1) \ ASCIIDOC_OK=-1 \ A2X_XML_OK=-1 \ - CC="$(TARGET_CC) -std=gnu17" \ + CC="$(TARGET_CC) $(if $(BR2_TOOLCHAIN_GCC_AT_LEAST_8),-std=gnu17)" \ LD="$(TARGET_LD)" \ OBJCOPY="$(TARGET_OBJCOPY)" \ AS="$(TARGET_AS)" \ diff --git a/boot/ti-k3-boot-firmware/ti-k3-boot-firmware.hash b/boot/ti-k3-boot-firmware/ti-k3-boot-firmware.hash index 571bbf12194..d94590e7054 100644 --- a/boot/ti-k3-boot-firmware/ti-k3-boot-firmware.hash +++ b/boot/ti-k3-boot-firmware/ti-k3-boot-firmware.hash @@ -1,3 +1,3 @@ # Locally calculated sha256 ab20ffbe7bba7e94be246b3417d33a914b3f07c16c47ef5a7f7602349a666a61 LICENSE.ti -sha256 f9e09b84e206d605a9fb5691a325dcd4a7d6a3e6bf70a69cbc169d1a5c617804 ti-linux-firmware-11.00.11.tar.xz +sha256 eda8af01e1c142e3ebe766877585ac4f37e4f1dc4ad5fe29ad15c120c18ccece ti-k3-boot-firmware-11.01.12.tar.gz diff --git a/boot/ti-k3-boot-firmware/ti-k3-boot-firmware.mk b/boot/ti-k3-boot-firmware/ti-k3-boot-firmware.mk index 117c0a9a5ad..7689071a4c2 100644 --- a/boot/ti-k3-boot-firmware/ti-k3-boot-firmware.mk +++ b/boot/ti-k3-boot-firmware/ti-k3-boot-firmware.mk @@ -4,9 +4,8 @@ # ################################################################################ -TI_K3_BOOT_FIRMWARE_VERSION = 11.00.11 -TI_K3_BOOT_FIRMWARE_SITE = https://git.ti.com/cgit/processor-firmware/ti-linux-firmware/snapshot -TI_K3_BOOT_FIRMWARE_SOURCE = ti-linux-firmware-$(TI_K3_BOOT_FIRMWARE_VERSION).tar.xz +TI_K3_BOOT_FIRMWARE_VERSION = 11.01.12 +TI_K3_BOOT_FIRMWARE_SITE = $(call github,TexasInstruments,ti-linux-firmware,$(TI_K3_BOOT_FIRMWARE_VERSION)) TI_K3_BOOT_FIRMWARE_INSTALL_IMAGES = YES TI_K3_BOOT_FIRMWARE_LICENSE = TI Proprietary TI_K3_BOOT_FIRMWARE_LICENSE_FILES = LICENSE.ti diff --git a/boot/ti-k3-r5-loader/Config.in b/boot/ti-k3-r5-loader/Config.in index b4fb46e55b8..7eb471e6d50 100644 --- a/boot/ti-k3-r5-loader/Config.in +++ b/boot/ti-k3-r5-loader/Config.in @@ -95,6 +95,12 @@ config BR2_TARGET_TI_K3_R5_LOADER_CUSTOM_CONFIG_FILE help Path to the TI K3 R5 Loader configuration file. +config BR2_TARGET_TI_K3_R5_LOADER_CONFIG_FRAGMENT_FILES + string "Additional configuration fragment files" + help + A space-separated list of configuration fragment files, + that will be merged to the tiboot3.bin configuration file. + config BR2_TARGET_TI_K3_R5_LOADER_CUSTOM_DTS_PATH string "Device Tree Source file paths" help diff --git a/boot/ti-k3-r5-loader/ti-k3-r5-loader.mk b/boot/ti-k3-r5-loader/ti-k3-r5-loader.mk index db5c3cdaf8b..178db5c0f35 100644 --- a/boot/ti-k3-r5-loader/ti-k3-r5-loader.mk +++ b/boot/ti-k3-r5-loader/ti-k3-r5-loader.mk @@ -77,6 +77,7 @@ TI_K3_R5_LOADER_MAKE_OPTS = \ HOSTLDFLAGS="$(HOST_LDFLAGS)" \ BINMAN_INDIRS=$(BINARIES_DIR) +TI_K3_R5_LOADER_KCONFIG_FRAGMENT_FILES = $(call qstrip,$(BR2_TARGET_TI_K3_R5_LOADER_CONFIG_FRAGMENT_FILES)) TI_K3_R5_LOADER_TIBOOT3_BIN = $(call qstrip,$(BR2_TARGET_TI_K3_R5_LOADER_TIBOOT3_BIN)) define TI_K3_R5_LOADER_INSTALL_TIBOOT3_BIN diff --git a/boot/uboot/Config.in b/boot/uboot/Config.in index 52e6050c81f..381a12197d4 100644 --- a/boot/uboot/Config.in +++ b/boot/uboot/Config.in @@ -41,7 +41,7 @@ choice Select the specific U-Boot version you want to use config BR2_TARGET_UBOOT_LATEST_VERSION - bool "2025.07" + bool "2026.10" config BR2_TARGET_UBOOT_CUSTOM_VERSION bool "Custom version" @@ -85,13 +85,21 @@ endif config BR2_TARGET_UBOOT_VERSION string - default "2025.07" if BR2_TARGET_UBOOT_LATEST_VERSION + default "2026.10" if BR2_TARGET_UBOOT_LATEST_VERSION default BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE \ if BR2_TARGET_UBOOT_CUSTOM_VERSION default "custom" if BR2_TARGET_UBOOT_CUSTOM_TARBALL default BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION \ if BR2_TARGET_UBOOT_CUSTOM_GIT || BR2_TARGET_UBOOT_CUSTOM_HG || BR2_TARGET_UBOOT_CUSTOM_SVN +config BR2_TARGET_UBOOT_LICENSE_FILES + string "U-boot license files" if BR2_TARGET_UBOOT_CUSTOM_GIT || BR2_TARGET_UBOOT_CUSTOM_HG || \ + BR2_TARGET_UBOOT_CUSTOM_SVN || BR2_TARGET_UBOOT_CUSTOM_TARBALL + default "Licenses/gpl-2.0.txt" + help + A space-separated list of license files related to U-Boot + package. + config BR2_TARGET_UBOOT_PATCH string "Custom U-Boot patches" default BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR if BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR != "" # legacy @@ -287,17 +295,37 @@ choice Since this version, the TEE in binary format must be used as it contains important meta-data. + https://optee.readthedocs.io/en/4.9.0/architecture/porting_guidelines.html#binaries + config BR2_TARGET_UBOOT_NEEDS_OPTEE_TEE_ELF bool "tee.elf" help + The main OP-TEE ELF file. All other OP-TEE binaries are + created with this as input. + ELF format may be used only for OP-TEE versions before 3.8.0. config BR2_TARGET_UBOOT_NEEDS_OPTEE_TEE_BIN bool "tee.bin" help + The original OP-TEE binary with a header (v1) and combined + init, paged, and unpaged parts. + Binary format must be used for OP-TEE versions since 3.8.0. +config BR2_TARGET_UBOOT_NEEDS_OPTEE_TEE_RAW_BIN + bool "tee-raw.bin" + help + Raw binary suitable to copy into physical memory where OP-TEE + be can executed from. + + OP-TEE since 3.21 suggests to use tee-raw.bin instead of (the + still identical) tee-pager_v2.bin. + + Texas Instrument’s K3 family of SoCs embed tee-raw.bin in + U-Boot (using Binman tool) to support their boot flow. + endchoice config BR2_TARGET_UBOOT_NEEDS_OPENSBI @@ -323,6 +351,15 @@ config BR2_TARGET_UBOOT_NEEDS_IMX_FIRMWARE This option makes sure that the i.MX firmwares are copied into the U-Boot source directory. +config BR2_TARGET_UBOOT_NEEDS_IMX_ELE_FIRMWARE + bool "U-Boot needs firmware-ele-imx" + depends on BR2_PACKAGE_FIRMWARE_ELE_IMX + help + Some i.MX8/i.MX9 platforms encapsulate NXP specific firmware + for the EdgeLock Secure Enclave inside U-Boot. + This option makes sure that the i.MX EdgeLock Secure Enclave + firmware is copied into the U-Boot source directory. + config BR2_TARGET_UBOOT_NEEDS_ROCKCHIP_RKBIN bool "U-Boot needs rockchip-rkbin" depends on BR2_PACKAGE_ROCKCHIP_RKBIN @@ -340,7 +377,7 @@ config BR2_TARGET_UBOOT_USE_BINMAN help Use binman tool for generation and signing of boot images. - https://docs.u-boot.org/en/v2025.07/develop/package/binman.html + https://docs.u-boot.org/en/v2026.10/develop/package/binman.html menu "U-Boot binary format" @@ -479,6 +516,14 @@ config BR2_TARGET_UBOOT_FORMAT_QSPI_BIN file for flashing by combining the spl/boot.bin and u-boot.itb files into a unified binary. +config BR2_TARGET_UBOOT_FORMAT_ADSP_LDR + bool "u-boot.ldr" + depends on BR2_arm || BR2_aarch64 + help + Boot stream format for Analog Devices, Inc. ADSP-SCxxx + processors including 32-bit SC589, SC592, and SC594, as + well as 64-bit SC596 and SC598 + config BR2_TARGET_UBOOT_FORMAT_STM32 bool "u-boot.stm32" depends on BR2_arm @@ -575,7 +620,8 @@ config BR2_TARGET_UBOOT_INITIAL_ENV config BR2_TARGET_UBOOT_ZYNQMP bool "Boot on the Xilinx ZynqMP SoCs" - depends on BR2_aarch64 + depends on BR2_TARGET_XILINX_FIRMWARE_ARCH_SUPPORTS + depends on BR2_cortex_a53 help Enable options specific to the Xilinx ZynqMP family of SoCs. @@ -676,7 +722,7 @@ config BR2_TARGET_UBOOT_ZYNQMP_PSU_INIT_FILE string "Custom psu_init_gpl file" depends on BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG help - On ZynqMP the booloader is responsible for some basic + On ZynqMP the bootloader is responsible for some basic initializations, such as enabling peripherals and configuring pinmuxes. The psu_init_gpl.c file (and, optionally, psu_init_gpl.h) contains the code for such @@ -701,6 +747,41 @@ config BR2_TARGET_UBOOT_ZYNQMP_PSU_INIT_FILE endif +config BR2_TARGET_UBOOT_ZYNQ + bool "Boot on the Xilinx Zynq SoCs" + depends on BR2_arm + depends on BR2_cortex_a9 + help + Enable options specific to the Xilinx Zynq family of SoCs. + +config BR2_TARGET_UBOOT_ZYNQ_PS7_INIT_FILE + string "Custom ps7_init_gpl file" + depends on BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG + depends on BR2_TARGET_UBOOT_ZYNQ + help + On Zynq the bootloader is responsible for some basic + initializations, such as enabling peripherals and + configuring pinmuxes. The ps7_init_gpl.c file (and, + optionally, ps7_init_gpl.h) contains the code for such + initializations. + + Although U-Boot contains ps7_init_gpl.c files for some + boards, each of them describes only one specific + configuration. Users of a different board, or needing a + different configuration, can generate custom files using + the Xilinx Vivado development tools. + + Set this variable to the path to your ps7_init_gpl.c file + (e.g. "board/myboard/ps7_init_gpl.c"). ps7_init_gpl.h, if + needed, should be in the same directory. U-Boot will build + and link the user-provided file instead of the built-in. + + Leave empty to use the files provided by U-Boot. + + This feature requires commit + 6da4f67ad09cd8b311d77b2b04e557b7ef65b56c from upstream + U-Boot, available from versions after 2018.07. + config BR2_TARGET_UBOOT_ALTERA_SOCFPGA_IMAGE_CRC bool "CRC image for Altera SoC FPGA (mkpimage)" depends on BR2_arm diff --git a/boot/uboot/uboot.hash b/boot/uboot/uboot.hash index 40c60d60838..2142f0c67ca 100644 --- a/boot/uboot/uboot.hash +++ b/boot/uboot/uboot.hash @@ -1,3 +1,3 @@ # Locally computed: -sha256 0f933f6c5a426895bf306e93e6ac53c60870e4b54cda56d95211bec99e63bec7 u-boot-2025.07.tar.bz2 +sha256 3f856da3cbbc93af51ff95fde18588a348b4a26723b01d9841e999d988481015 u-boot-2026.10.tar.bz2 sha256 8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643 Licenses/gpl-2.0.txt diff --git a/boot/uboot/uboot.mk b/boot/uboot/uboot.mk index dd4cf7d6e58..b498d253eff 100644 --- a/boot/uboot/uboot.mk +++ b/boot/uboot/uboot.mk @@ -8,9 +8,7 @@ UBOOT_VERSION = $(call qstrip,$(BR2_TARGET_UBOOT_VERSION)) UBOOT_BOARD_NAME = $(call qstrip,$(BR2_TARGET_UBOOT_BOARDNAME)) UBOOT_LICENSE = GPL-2.0+ -ifeq ($(BR2_TARGET_UBOOT_LATEST_VERSION),y) -UBOOT_LICENSE_FILES = Licenses/gpl-2.0.txt -endif +UBOOT_LICENSE_FILES = $(call qstrip,$(BR2_TARGET_UBOOT_LICENSE_FILES)) UBOOT_CPE_ID_VENDOR = denx UBOOT_CPE_ID_PRODUCT = u-boot @@ -40,7 +38,7 @@ UBOOT_SITE = $(call qstrip,$(BR2_TARGET_UBOOT_CUSTOM_REPO_URL)) UBOOT_SITE_METHOD = svn else # Handle stable official U-Boot versions -UBOOT_SITE = https://ftp.denx.de/pub/u-boot +UBOOT_SITE = https://git.u-boot-project.org/u-boot/u-boot/-/releases/v$(UBOOT_VERSION)/downloads UBOOT_SOURCE = u-boot-$(UBOOT_VERSION).tar.bz2 endif @@ -210,6 +208,8 @@ ifeq ($(BR2_TARGET_UBOOT_NEEDS_OPTEE_TEE_ELF),y) UBOOT_MAKE_OPTS += TEE=$(BINARIES_DIR)/tee.elf else ifeq ($(BR2_TARGET_UBOOT_NEEDS_OPTEE_TEE_BIN),y) UBOOT_MAKE_OPTS += TEE=$(BINARIES_DIR)/tee.bin +else ifeq ($(BR2_TARGET_UBOOT_NEEDS_OPTEE_TEE_RAW_BIN),y) +UBOOT_MAKE_OPTS += TEE=$(BINARIES_DIR)/tee-raw.bin endif endif @@ -228,13 +228,21 @@ endif # Mainline U-Boot versions can create the i.MX specific boot images # and need some NXP firmware blobs. +ifneq ($(BR2_TARGET_UBOOT_NEEDS_IMX_FIRMWARE)$(BR2_TARGET_UBOOT_NEEDS_IMX_ELE_FIRMWARE),) + ifeq ($(BR2_TARGET_UBOOT_NEEDS_IMX_FIRMWARE),y) UBOOT_DEPENDENCIES += firmware-imx -UBOOT_IMX_FW_FILES = \ +UBOOT_IMX_FW_FILES += \ $(if $(BR2_PACKAGE_FIRMWARE_IMX_NEEDS_HDMI_FW),signed_hdmi_imx8m.bin) \ $(if $(BR2_PACKAGE_FIRMWARE_IMX_LPDDR4),lpddr4*.bin) \ $(if $(BR2_PACKAGE_FIRMWARE_IMX_DDR4),ddr4*.bin) \ $(if $(BR2_PACKAGE_FIRMWARE_IMX_DDR3),ddr3*.bin) +endif + +ifeq ($(BR2_TARGET_UBOOT_NEEDS_IMX_ELE_FIRMWARE),y) +UBOOT_DEPENDENCIES += firmware-ele-imx +UBOOT_IMX_FW_FILES += $(FIRMWARE_ELE_IMX_AHAB_CONTAINER_IMAGE) +endif define UBOOT_COPY_IMX_FW_FILES $(foreach fw,$(UBOOT_IMX_FW_FILES),\ @@ -261,6 +269,11 @@ UBOOT_MAKE_OPTS += TEE=$(BINARIES_DIR)/$(notdir $(ROCKCHIP_RKBIN_TEE_FILENAME)) endif endif +ifeq ($(BR2_TARGET_UBOOT_FORMAT_ADSP_LDR),y) +UBOOT_BINS += u-boot.ldr +UBOOT_DEPENDENCIES += host-adsp-ldr +endif + ifeq ($(BR2_TARGET_UBOOT_NEEDS_DTC),y) UBOOT_DEPENDENCIES += host-dtc UBOOT_MAKE_OPTS += DTC=$(HOST_DIR)/bin/dtc @@ -311,7 +324,7 @@ endif # prior to u-boot 2013.10 the license info was in COPYING. Copy it so # legal-info finds it define UBOOT_COPY_OLD_LICENSE_FILE - if [ -f $(@D)/COPYING ]; then \ + if [ -f $(@D)/COPYING ] && [ ! -f $(@D)/Licenses/gpl-2.0.txt ]; then \ $(INSTALL) -m 0644 -D $(@D)/COPYING $(@D)/Licenses/gpl-2.0.txt; \ fi endef @@ -413,8 +426,12 @@ UBOOT_KCONFIG_OPTS = $(UBOOT_MAKE_OPTS) HOSTCC="$(HOSTCC_NOCCACHE)" HOSTLDFLAGS= ifeq ($(BR2_TARGET_UBOOT_DEFAULT_ENV_FILE_ENABLED),y) UBOOT_DEFAULT_ENV_FILE = $(call qstrip,$(BR2_TARGET_UBOOT_DEFAULT_ENV_FILE)) define UBOOT_KCONFIG_DEFAULT_ENV_FILE + # Pre-2025.10 $(call KCONFIG_SET_OPT,CONFIG_USE_DEFAULT_ENV_FILE,y) $(call KCONFIG_SET_OPT,CONFIG_DEFAULT_ENV_FILE,"$(shell readlink -f $(UBOOT_DEFAULT_ENV_FILE))") + # 2025.10 and later + $(call KCONFIG_SET_OPT,CONFIG_ENV_USE_DEFAULT_ENV_TEXT_FILE,y) + $(call KCONFIG_SET_OPT,CONFIG_ENV_DEFAULT_ENV_TEXT_FILE,"$(shell readlink -f $(UBOOT_DEFAULT_ENV_FILE))") endef endif endif # BR2_TARGET_UBOOT_BUILD_SYSTEM_LEGACY @@ -524,6 +541,17 @@ endif endif # BR2_TARGET_UBOOT_ZYNQMP +ifeq ($(BR2_TARGET_UBOOT_ZYNQ),y) +UBOOT_ZYNQ_PS7_INIT = $(call qstrip,$(BR2_TARGET_UBOOT_ZYNQ_PS7_INIT_FILE)) +UBOOT_ZYNQ_PS7_INIT_PATH = $(shell readlink -f $(UBOOT_ZYNQ_PS7_INIT)) + +ifneq ($(UBOOT_ZYNQ_PS7_INIT),) +define UBOOT_ZYNQ_KCONFIG_PS7_INIT + $(call KCONFIG_SET_OPT,CONFIG_XILINX_PS_INIT_FILE,"$(UBOOT_ZYNQ_PS7_INIT_PATH)") +endef +endif +endif # BR2_TARGET_UBOOT_ZYNQ + define UBOOT_INSTALL_OMAP_IFT_IMAGE cp -dpf $(@D)/$(UBOOT_BIN_IFT) $(BINARIES_DIR)/ endef @@ -566,6 +594,7 @@ define UBOOT_KCONFIG_FIXUP_CMDS $(UBOOT_ZYNQMP_KCONFIG_PMUFW) $(UBOOT_ZYNQMP_KCONFIG_PM_CFG) $(UBOOT_ZYNQMP_KCONFIG_PSU_INIT) + $(UBOOT_ZYNQ_KCONFIG_PS7_INIT) $(UBOOT_KCONFIG_DEFAULT_ENV_FILE) endef diff --git a/boot/xilinx-embeddedsw/Config.in b/boot/xilinx-embeddedsw/Config.in index 0dd64336084..03488a18ce1 100644 --- a/boot/xilinx-embeddedsw/Config.in +++ b/boot/xilinx-embeddedsw/Config.in @@ -1,11 +1,10 @@ comment "xilinx-embeddedsw needs a bare metal toolchain for tuple microblazeel-buildroot-elf" depends on BR2_TOOLCHAIN_BARE_METAL_BUILDROOT_ARCH != "microblazeel-buildroot-elf" - depends on BR2_aarch64 + depends on BR2_TOOLCHAIN_BARE_METAL_BUILDROOT_ARCH != "microblazeel-buildroot-elf riscv32-buildroot-elf" depends on BR2_TOOLCHAIN_BARE_METAL_BUILDROOT menuconfig BR2_TARGET_XILINX_EMBEDDEDSW bool "xilinx-embeddedsw" - depends on BR2_aarch64 depends on BR2_TOOLCHAIN_BARE_METAL_BUILDROOT help Build boot firmware applications from source for Xilinx @@ -23,13 +22,36 @@ if BR2_TARGET_XILINX_EMBEDDEDSW config BR2_TARGET_XILINX_EMBEDDEDSW_VERSION string "xilinx-embeddedsw version" - default "xilinx_v2025.1" + default "xilinx_v2026.1" help Release version of Xilinx/embeddedsw. Must be xilinx_v2023.1 or newer. +config BR2_TARGET_XILINX_EMBEDDEDSW_VERSAL2_ASUFW + bool "versal2 asufw" + depends on BR2_cortex_a78 + help + Build versal2 asufw application from Xilinx/embeddedsw + repo. + + https://github.com/Xilinx/embeddedsw/tree/master/lib/sw_apps/asufw + Version must be xilinx_v2025.2 or newer. + +config BR2_TARGET_XILINX_EMBEDDEDSW_VERSAL2_PLM + bool "versal2 plm" + depends on BR2_cortex_a78 + help + Build versal2 plm application from Xilinx/embeddedsw repo. + If selected, the xilinx-prebuilt package will not install + the plm.elf since it will come from the xilinx-embeddedsw + package. + + https://github.com/Xilinx/embeddedsw/tree/master/lib/sw_apps/versal_plm + Version must be xilinx_v2025.2 or newer. + config BR2_TARGET_XILINX_EMBEDDEDSW_VERSAL_PLM bool "versal plm" + depends on BR2_cortex_a72 help Build versal plm application from Xilinx/embeddedsw repo. If selected, the xilinx-prebuilt package will not install @@ -40,6 +62,7 @@ config BR2_TARGET_XILINX_EMBEDDEDSW_VERSAL_PLM config BR2_TARGET_XILINX_EMBEDDEDSW_VERSAL_PSMFW bool "versal psmfw" + depends on BR2_cortex_a72 help Build versal psmfw application from Xilinx/embeddedsw repo. If selected, the xilinx-prebuilt package will not install @@ -50,6 +73,7 @@ config BR2_TARGET_XILINX_EMBEDDEDSW_VERSAL_PSMFW config BR2_TARGET_XILINX_EMBEDDEDSW_ZYNQMP_PMUFW bool "zynqmp pmufw" + depends on BR2_cortex_a53 help Build zynqmp pmufw application from Xilinx/embeddedsw repo. If selected, the xilinx-prebuilt package will not install diff --git a/boot/xilinx-embeddedsw/xilinx-embeddedsw.hash b/boot/xilinx-embeddedsw/xilinx-embeddedsw.hash deleted file mode 100644 index 0a42bab3142..00000000000 --- a/boot/xilinx-embeddedsw/xilinx-embeddedsw.hash +++ /dev/null @@ -1,5 +0,0 @@ -# Locally calculated -sha256 867b7c7652f754d1a3d6edfe76e53223670e2b4c7e4144d4db1604403d68f616 xilinx-embeddedsw-xilinx_v2025.1.tar.gz - -# Locally calculated -sha256 fbee87edd32cf203fdd7925f0bab15c98e2dc1e0d61e70867f1190dc4a605b12 license.txt diff --git a/boot/xilinx-embeddedsw/xilinx-embeddedsw.mk b/boot/xilinx-embeddedsw/xilinx-embeddedsw.mk index abcfee255d2..b19c420d32c 100644 --- a/boot/xilinx-embeddedsw/xilinx-embeddedsw.mk +++ b/boot/xilinx-embeddedsw/xilinx-embeddedsw.mk @@ -30,6 +30,39 @@ XILINX_EMBEDDEDSW_ZYNQMP_PMUFW_CFLAGS = \ "-Os -flto -ffat-lto-objects $(XILINX_EMBEDDEDSW_ZYNQMP_PMUFW_USER_CFLAGS)" XILINX_EMBEDDEDSW_CFLAGS = "-Os -flto -ffat-lto-objects" +XILINX_EMBEDDEDSW_ASUFW_CFLAGS = "-O2 -ffat-lto-objects -fno-lto" + +ifeq ($(BR2_TARGET_XILINX_EMBEDDEDSW_VERSAL2_ASUFW),y) +define XILINX_EMBEDDEDSW_BUILD_VERSAL2_ASUFW + $(MAKE) -C $(@D)/lib/sw_apps/asufw/src \ + COMPILER=$(HOST_DIR)/bin/riscv32-buildroot-elf-gcc \ + ARCHIVER=$(HOST_DIR)/bin/riscv32-buildroot-elf-gcc-ar \ + CC=$(HOST_DIR)/bin/riscv32-buildroot-elf-gcc \ + CFLAGS=$(XILINX_EMBEDDEDSW_ASUFW_CFLAGS) +endef + +define XILINX_EMBEDDEDSW_INSTALL_VERSAL2_ASUFW + $(INSTALL) -D -m 0755 $(@D)/lib/sw_apps/asufw/src/asufw.elf \ + $(BINARIES_DIR)/asufw.elf +endef +endif # BR2_TARGET_XILINX_EMBEDDEDSW_VERSAL2_ASUFW + +ifeq ($(BR2_TARGET_XILINX_EMBEDDEDSW_VERSAL2_PLM),y) +define XILINX_EMBEDDEDSW_BUILD_VERSAL2_PLM + $(MAKE) -C $(@D)/lib/sw_apps/versal_plm/src/versal_2ve_2vm \ + COMPILER=$(XILINX_EMBEDDEDSW_MICROBLAZE_CC) \ + ARCHIVER=$(XILINX_EMBEDDEDSW_MICROBLAZE_AR) \ + CC=$(XILINX_EMBEDDEDSW_MICROBLAZE_CC) \ + CFLAGS=$(XILINX_EMBEDDEDSW_CFLAGS) \ + XILPM_RUNTIME_LIB=SUBSYS +endef + +define XILINX_EMBEDDEDSW_INSTALL_VERSAL2_PLM + $(INSTALL) -D -m 0755 \ + $(@D)/lib/sw_apps/versal_plm/src/versal_2ve_2vm/plm.elf \ + $(BINARIES_DIR)/plm.elf +endef +endif # BR2_TARGET_XILINX_EMBEDDEDSW_VERSAL2_PLM ifeq ($(BR2_TARGET_XILINX_EMBEDDEDSW_VERSAL_PLM),y) define XILINX_EMBEDDEDSW_BUILD_VERSAL_PLM @@ -77,12 +110,16 @@ endef endif # BR2_TARGET_XILINX_EMBEDDEDSW_ZYNQMP_PMUFW define XILINX_EMBEDDEDSW_BUILD_CMDS + $(XILINX_EMBEDDEDSW_BUILD_VERSAL2_ASUFW) + $(XILINX_EMBEDDEDSW_BUILD_VERSAL2_PLM) $(XILINX_EMBEDDEDSW_BUILD_VERSAL_PLM) $(XILINX_EMBEDDEDSW_BUILD_VERSAL_PSMFW) $(XILINX_EMBEDDEDSW_BUILD_ZYNQMP_PMUFW) endef define XILINX_EMBEDDEDSW_INSTALL_IMAGES_CMDS + $(XILINX_EMBEDDEDSW_INSTALL_VERSAL2_ASUFW) + $(XILINX_EMBEDDEDSW_INSTALL_VERSAL2_PLM) $(XILINX_EMBEDDEDSW_INSTALL_VERSAL_PLM) $(XILINX_EMBEDDEDSW_INSTALL_VERSAL_PSMFW) $(XILINX_EMBEDDEDSW_INSTALL_ZYNQMP_PMUFW) diff --git a/boot/xilinx-embeddedsw/xilinx_v2026.1/xilinx-embeddedsw.hash b/boot/xilinx-embeddedsw/xilinx_v2026.1/xilinx-embeddedsw.hash new file mode 100644 index 00000000000..35d443e965f --- /dev/null +++ b/boot/xilinx-embeddedsw/xilinx_v2026.1/xilinx-embeddedsw.hash @@ -0,0 +1,5 @@ +# Locally calculated +sha256 c6cce76eec367bda35c0c02fea18b0cb913b57a30ae809aa803e4c8c64e6991f xilinx-embeddedsw-xilinx_v2026.1.tar.gz + +# Locally calculated +sha256 bfcf86c2e567dd91b311be961ef0a144934e1c79f8b9c4518d0a65e44006ea5d license.txt diff --git a/boot/xilinx-prebuilt/Config.in b/boot/xilinx-prebuilt/Config.in index 836cd8b68a4..ff129ed5b52 100644 --- a/boot/xilinx-prebuilt/Config.in +++ b/boot/xilinx-prebuilt/Config.in @@ -1,6 +1,5 @@ menuconfig BR2_TARGET_XILINX_PREBUILT bool "xilinx-prebuilt" - depends on BR2_aarch64 help Pre-built firmware files for Xilinx boards. @@ -18,7 +17,7 @@ if BR2_TARGET_XILINX_PREBUILT config BR2_TARGET_XILINX_PREBUILT_VERSION string "prebuilt version" - default "xilinx_v2025.1" + default "xilinx_v2026.1" help Release version of Xilinx firmware. Must be xilinx_v2023.1 or newer. @@ -26,25 +25,37 @@ config BR2_TARGET_XILINX_PREBUILT_VERSION choice bool "family variant" default BR2_TARGET_XILINX_PREBUILT_VERSAL if BR2_PACKAGE_VERSAL_FIRMWARE # legacy + default BR2_TARGET_XILINX_PREBUILT_VERSAL if BR2_cortex_a72 + default BR2_TARGET_XILINX_PREBUILT_VERSAL2 if BR2_cortex_a78 default BR2_TARGET_XILINX_PREBUILT_ZYNQMP config BR2_TARGET_XILINX_PREBUILT_ZYNQMP bool "zynqmp" + depends on BR2_cortex_a53 config BR2_TARGET_XILINX_PREBUILT_KRIA bool "kria" + depends on BR2_cortex_a53 config BR2_TARGET_XILINX_PREBUILT_VERSAL bool "versal" + depends on BR2_cortex_a72 + +config BR2_TARGET_XILINX_PREBUILT_VERSAL2 + bool "versal2" + depends on BR2_cortex_a78 + help + Version must be xilinx_v2025.2 or newer. endchoice config BR2_TARGET_XILINX_PREBUILT_VERSAL_XSA bool "download a prebuilt Versal XSA" - depends on BR2_TARGET_XILINX_PREBUILT_VERSAL + depends on BR2_TARGET_XILINX_PREBUILT_VERSAL || BR2_TARGET_XILINX_PREBUILT_VERSAL2 help The Xilinx Support Archive (XSA) provides custom Xilinx firmware files generated by the AMD Vivado Design Suite. + This option applies to either versal or versal2. https://docs.amd.com/r/en-US/ug1400-vitis-embedded/Creating-a-Hardware-Design-XSA-File @@ -57,32 +68,37 @@ config BR2_TARGET_XILINX_PREBUILT_VERSAL_XSA_LOCATION file. This URL can use any protocol recognized by Buildroot, like http://, ftp://, file:// or scp://. - When pointing to a local XSA using file://, you may want to - use a make variable like $(TOPDIR) to reference the root of - the Buildroot tree. + When pointing to a local XSA using file:// or simply the + local path, you may want to use a make variable like + $(TOPDIR) to reference the root of the Buildroot tree. + + This option applies to either versal or versal2. endif # BR2_TARGET_XILINX_PREBUILT_VERSAL_XSA config BR2_TARGET_XILINX_PREBUILT_VERSAL_PLD_PDI bool "install versal pld.pdi" - depends on BR2_TARGET_XILINX_PREBUILT_VERSAL + depends on BR2_TARGET_XILINX_PREBUILT_VERSAL || BR2_TARGET_XILINX_PREBUILT_VERSAL2 help When using the Versal Segmented Configuration, there is a pld.pdi file containing the FPGA bitstream which can be loaded at run-time. By enabling this option, the pld.pdi will be installed to the target /lib/firmware/xilinx dir. + This option applies to either versal or versal2. config BR2_TARGET_XILINX_PREBUILT_FAMILY string default "zynqmp" if BR2_TARGET_XILINX_PREBUILT_ZYNQMP default "kria" if BR2_TARGET_XILINX_PREBUILT_KRIA default "versal" if BR2_TARGET_XILINX_PREBUILT_VERSAL + default "versal_2ve_2vm" if BR2_TARGET_XILINX_PREBUILT_VERSAL2 config BR2_TARGET_XILINX_PREBUILT_BOARD string "board name" default "zcu102" if BR2_TARGET_XILINX_PREBUILT_ZYNQMP default "kr260" if BR2_TARGET_XILINX_PREBUILT_KRIA default "vck190" if BR2_TARGET_XILINX_PREBUILT_VERSAL + default "vek385" if BR2_TARGET_XILINX_PREBUILT_VERSAL2 help Name of Xilinx target board. Used for installing the appropriate firmware. diff --git a/boot/xilinx-prebuilt/xilinx-prebuilt.hash b/boot/xilinx-prebuilt/xilinx-prebuilt.hash deleted file mode 100644 index 9f12e88e7a0..00000000000 --- a/boot/xilinx-prebuilt/xilinx-prebuilt.hash +++ /dev/null @@ -1,5 +0,0 @@ -# Locally calculated -sha256 b9e2572885ad12243e10d48d9fccb24771a528b9f27aae1b29b45f0806ce9f1f xilinx-prebuilt-xilinx_v2025.1.tar.gz - -# Locally calculated -sha256 7b2074b607264a07347e1a7ef0323229585942793469f34b2cf9628f7623e05f LICENSE diff --git a/boot/xilinx-prebuilt/xilinx-prebuilt.mk b/boot/xilinx-prebuilt/xilinx-prebuilt.mk index 62b60b88fac..74334449242 100644 --- a/boot/xilinx-prebuilt/xilinx-prebuilt.mk +++ b/boot/xilinx-prebuilt/xilinx-prebuilt.mk @@ -10,6 +10,9 @@ ifeq ($(BR2_TARGET_XILINX_PREBUILT_VERSAL_XSA),y) XILINX_PREBUILT_FILE = $(call qstrip,$(BR2_TARGET_XILINX_PREBUILT_VERSAL_XSA_LOCATION)) XILINX_PREBUILT_SITE = $(patsubst %/,%,$(dir $(XILINX_PREBUILT_FILE))) XILINX_PREBUILT_SOURCE = $(notdir $(XILINX_PREBUILT_FILE)) +ifeq ($(findstring ://,$(XILINX_PREBUILT_FILE)),) +XILINX_PREBUILT_SITE_METHOD = file +endif define XILINX_PREBUILT_EXTRACT_CMDS $(UNZIP) $(XILINX_PREBUILT_DL_DIR)/$(XILINX_PREBUILT_SOURCE) -d $(@D) endef @@ -26,15 +29,11 @@ XILINX_PREBUILT_BOARD = $(call qstrip,$(BR2_TARGET_XILINX_PREBUILT_BOARD)) XILINX_PREBUILT_BOARD_DIR = $(@D)/$(XILINX_PREBUILT_BOARD)-$(XILINX_PREBUILT_FAMILY) -ifeq ($(BR2_TARGET_XILINX_PREBUILT_VERSAL),y) +# Common Files for All Versal Families +ifeq ($(BR2_TARGET_XILINX_PREBUILT_VERSAL)$(BR2_TARGET_XILINX_PREBUILT_VERSAL2),y) ifeq ($(BR2_TARGET_XILINX_PREBUILT_VERSAL_XSA),y) -XILINX_PREBUILT_PLM = $(@D)/pdi_files/gen_files/plm.elf -# Unlike the psmfw.elf file for Xilinx development boards, -# AMD Vivado Design Suite currently generates a file named psm_fw.elf. -# Future versions of AMD Vivado will generate a file named psmfw.elf, -# so to support current and future AMD Vivado versions, the filename -# psm*fw.elf is used. -XILINX_PREBUILT_PSMFW = $(@D)/pdi_files/static_files/psm*fw.elf +# Supports either plm.elf or plmfw.elf filenames +XILINX_PREBUILT_PLM = $(@D)/pdi_files/gen_files/plm*.elf # We need the *.pdi glob, because the file has different names for the # different boards, and it has to be named boot.pdi when installed. # If Segmented Configuration is used, there will be two pdi files and we need @@ -60,8 +59,8 @@ define XILINX_PREBUILT_INSTALL_VERSAL_XSA_PLD_PDI endef endif # BR2_TARGET_XILINX_PREBUILT_VERSAL_PLD_PDI else # BR2_TARGET_XILINX_PREBUILT_VERSAL_XSA -XILINX_PREBUILT_PLM = $(XILINX_PREBUILT_BOARD_DIR)/plm.elf -XILINX_PREBUILT_PSMFW = $(XILINX_PREBUILT_BOARD_DIR)/psmfw.elf +# Supports either plm.elf or plmfw.elf filenames +XILINX_PREBUILT_PLM = $(XILINX_PREBUILT_BOARD_DIR)/plm*.elf # We need the *.pdi glob, because the file has different names for the # different boards, and it has to be named boot.pdi when installed. # If Segmented Configuration is used, there will be two pdi files and we need @@ -89,11 +88,27 @@ endif # BR2_TARGET_XILINX_PREBUILT_VERSAL_PLD_PDI endif # BR2_TARGET_XILINX_PREBUILT_VERSAL_XSA ifneq ($(BR2_TARGET_XILINX_EMBEDDEDSW_VERSAL_PLM),y) +ifneq ($(BR2_TARGET_XILINX_EMBEDDEDSW_VERSAL2_PLM),y) define XILINX_PREBUILT_INSTALL_VERSAL_PLM $(INSTALL) -D -m 0755 $(XILINX_PREBUILT_PLM) \ $(BINARIES_DIR)/plm.elf endef +endif # !BR2_TARGET_XILINX_EMBEDDEDSW_VERSAL2_PLM endif # !BR2_TARGET_XILINX_EMBEDDEDSW_VERSAL_PLM +endif # BR2_TARGET_XILINX_PREBUILT_VERSAL | BR2_TARGET_XILINX_PREBUILT_VERSAL2 + +# Files specific to Versal Gen1 +ifeq ($(BR2_TARGET_XILINX_PREBUILT_VERSAL),y) +ifeq ($(BR2_TARGET_XILINX_PREBUILT_VERSAL_XSA),y) +# Unlike the psmfw.elf file for Xilinx development boards, +# AMD Vivado Design Suite currently generates a file named psm_fw.elf. +# Future versions of AMD Vivado will generate a file named psmfw.elf, +# so to support current and future AMD Vivado versions, the filename +# psm*fw.elf is used. +XILINX_PREBUILT_PSMFW = $(@D)/pdi_files/static_files/psm*fw.elf +else # BR2_TARGET_XILINX_PREBUILT_VERSAL_XSA +XILINX_PREBUILT_PSMFW = $(XILINX_PREBUILT_BOARD_DIR)/psmfw.elf +endif # BR2_TARGET_XILINX_PREBUILT_VERSAL_XSA ifneq ($(BR2_TARGET_XILINX_EMBEDDEDSW_VERSAL_PSMFW),y) define XILINX_PREBUILT_INSTALL_VERSAL_PSMFW @@ -101,15 +116,16 @@ define XILINX_PREBUILT_INSTALL_VERSAL_PSMFW $(BINARIES_DIR)/psmfw.elf endef endif # !BR2_TARGET_XILINX_EMBEDDEDSW_VERSAL_PSMFW +endif # BR2_TARGET_XILINX_PREBUILT_VERSAL -else # BR2_TARGET_XILINX_PREBUILT_VERSAL +ifeq ($(BR2_TARGET_XILINX_PREBUILT_KRIA)$(BR2_TARGET_XILINX_PREBUILT_ZYNQMP),y) ifneq ($(BR2_TARGET_XILINX_EMBEDDEDSW_ZYNQMP_PMUFW),y) define XILINX_PREBUILT_INSTALL_ZYNQMP_PMUFW $(INSTALL) -D -m 0755 $(XILINX_PREBUILT_BOARD_DIR)/pmufw.elf \ $(BINARIES_DIR)/pmufw.elf endef endif # !BR2_TARGET_XILINX_EMBEDDEDSW_ZYNQMP_PMUFW -endif # BR2_TARGET_XILINX_PREBUILT_VERSAL +endif # BR2_TARGET_XILINX_PREBUILT_KRIA | BR2_TARGET_XILINX_PREBUILT_ZYNQMP define XILINX_PREBUILT_INSTALL_IMAGES_CMDS $(XILINX_PREBUILT_INSTALL_VERSAL_PLM) diff --git a/boot/xilinx-prebuilt/xilinx_v2026.1/xilinx-prebuilt.hash b/boot/xilinx-prebuilt/xilinx_v2026.1/xilinx-prebuilt.hash new file mode 100644 index 00000000000..4e82561cb13 --- /dev/null +++ b/boot/xilinx-prebuilt/xilinx_v2026.1/xilinx-prebuilt.hash @@ -0,0 +1,5 @@ +# Locally calculated +sha256 6e02391f0dae67a46efc260729901da9c110b956880d0ff2617701f8b6cf0e1c xilinx-prebuilt-xilinx_v2026.1.tar.gz + +# Locally calculated +sha256 e4a8315687fbd55fc6bf0965c968bd95c8b73b8a957bb10b2ba618d5390b0e3a LICENSE diff --git a/configs/aarch64_efi_defconfig b/configs/aarch64_efi_defconfig index 3aa649cf9c3..78292c0cc43 100644 --- a/configs/aarch64_efi_defconfig +++ b/configs/aarch64_efi_defconfig @@ -1,5 +1,7 @@ BR2_aarch64=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_11=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_GLIBC_STABLE=y BR2_GLOBAL_PATCH_DIR="board/aarch64-efi/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y @@ -7,8 +9,9 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/aarch64-efi/post-image.sh support/scripts/ge BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/aarch64-efi/genimage-efi.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.11.11" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.14" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/aarch64-efi/linux-pmem-netboot.fragment" BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y BR2_LINUX_KERNEL_NEEDS_HOST_PYTHON3=y BR2_TARGET_ROOTFS_EXT2=y diff --git a/configs/acmesystems_acqua_a5_256mb_defconfig b/configs/acmesystems_acqua_a5_256mb_defconfig index 9e6d35a859c..3eb805b5306 100644 --- a/configs/acmesystems_acqua_a5_256mb_defconfig +++ b/configs/acmesystems_acqua_a5_256mb_defconfig @@ -2,7 +2,8 @@ BR2_arm=y BR2_cortex_a5=y BR2_ARM_ENABLE_VFP=y BR2_ARM_INSTRUCTIONS_THUMB2=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV7_EABIHF_GLIBC_STABLE=y BR2_GLOBAL_PATCH_DIR="board/acmesystems/acqua-a5/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_SYSTEM_DHCP="eth0" @@ -10,7 +11,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/acmesystems/acqua-a5/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.41" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.40" BR2_LINUX_KERNEL_DEFCONFIG="sama5" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_CUSTOM_DTS_DIR="board/acmesystems/acqua-a5/dts" @@ -22,6 +23,7 @@ BR2_TARGET_AT91BOOTSTRAP3=y BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git" BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.10.3" +BR2_TARGET_AT91BOOTSTRAP3_LICENSE_FILES="" BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="acqua-256m" BR2_PACKAGE_HOST_DOSFSTOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y diff --git a/configs/acmesystems_acqua_a5_512mb_defconfig b/configs/acmesystems_acqua_a5_512mb_defconfig index 8e6d9774da1..0664a268b02 100644 --- a/configs/acmesystems_acqua_a5_512mb_defconfig +++ b/configs/acmesystems_acqua_a5_512mb_defconfig @@ -2,7 +2,8 @@ BR2_arm=y BR2_cortex_a5=y BR2_ARM_ENABLE_VFP=y BR2_ARM_INSTRUCTIONS_THUMB2=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV7_EABIHF_GLIBC_STABLE=y BR2_GLOBAL_PATCH_DIR="board/acmesystems/acqua-a5/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_SYSTEM_DHCP="eth0" @@ -10,7 +11,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/acmesystems/acqua-a5/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.41" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.40" BR2_LINUX_KERNEL_DEFCONFIG="sama5" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_CUSTOM_DTS_DIR="board/acmesystems/acqua-a5/dts" @@ -22,6 +23,7 @@ BR2_TARGET_AT91BOOTSTRAP3=y BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git" BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.10.3" +BR2_TARGET_AT91BOOTSTRAP3_LICENSE_FILES="" BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="acqua-512m" BR2_PACKAGE_HOST_DOSFSTOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y diff --git a/configs/acmesystems_aria_g25_128mb_defconfig b/configs/acmesystems_aria_g25_128mb_defconfig deleted file mode 100644 index 0aff8f92e0d..00000000000 --- a/configs/acmesystems_aria_g25_128mb_defconfig +++ /dev/null @@ -1,26 +0,0 @@ -BR2_arm=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y -BR2_GLOBAL_PATCH_DIR="board/acmesystems/aria-g25/patches" -BR2_DOWNLOAD_FORCE_CHECK_HASHES=y -BR2_TARGET_GENERIC_ISSUE="Welcome to Aria-G25 Buildroot" -BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" -BR2_TARGET_GENERIC_GETTY_BAUDRATE_115200=y -BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" -BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/acmesystems/aria-g25/genimage.cfg" -BR2_LINUX_KERNEL=y -BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.315" -BR2_LINUX_KERNEL_DEFCONFIG="at91_dt" -BR2_LINUX_KERNEL_DTS_SUPPORT=y -BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-ariag25" -BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y -BR2_TARGET_ROOTFS_EXT2=y -BR2_TARGET_ROOTFS_EXT2_4=y -BR2_TARGET_AT91BOOTSTRAP3=y -BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y -BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git" -BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.10.3" -BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="aria-128m" -BR2_PACKAGE_HOST_DOSFSTOOLS=y -BR2_PACKAGE_HOST_GENIMAGE=y -BR2_PACKAGE_HOST_MTOOLS=y diff --git a/configs/acmesystems_aria_g25_256mb_defconfig b/configs/acmesystems_aria_g25_256mb_defconfig deleted file mode 100644 index e75ca9cf346..00000000000 --- a/configs/acmesystems_aria_g25_256mb_defconfig +++ /dev/null @@ -1,26 +0,0 @@ -BR2_arm=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y -BR2_GLOBAL_PATCH_DIR="board/acmesystems/aria-g25/patches" -BR2_DOWNLOAD_FORCE_CHECK_HASHES=y -BR2_TARGET_GENERIC_ISSUE="Welcome to Aria-G25 Buildroot" -BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" -BR2_TARGET_GENERIC_GETTY_BAUDRATE_115200=y -BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" -BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/acmesystems/aria-g25/genimage.cfg" -BR2_LINUX_KERNEL=y -BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.315" -BR2_LINUX_KERNEL_DEFCONFIG="at91_dt" -BR2_LINUX_KERNEL_DTS_SUPPORT=y -BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-ariag25" -BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y -BR2_TARGET_ROOTFS_EXT2=y -BR2_TARGET_ROOTFS_EXT2_4=y -BR2_TARGET_AT91BOOTSTRAP3=y -BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y -BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git" -BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.10.3" -BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="aria-256m" -BR2_PACKAGE_HOST_DOSFSTOOLS=y -BR2_PACKAGE_HOST_GENIMAGE=y -BR2_PACKAGE_HOST_MTOOLS=y diff --git a/configs/acmesystems_arietta_g25_128mb_defconfig b/configs/acmesystems_arietta_g25_128mb_defconfig deleted file mode 100644 index 788818c118a..00000000000 --- a/configs/acmesystems_arietta_g25_128mb_defconfig +++ /dev/null @@ -1,26 +0,0 @@ -BR2_arm=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y -BR2_GLOBAL_PATCH_DIR="board/acmesystems/arietta-g25/patches" -BR2_DOWNLOAD_FORCE_CHECK_HASHES=y -BR2_TARGET_GENERIC_ISSUE="Welcome to Arietta-G25 Buildroot" -BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" -BR2_TARGET_GENERIC_GETTY_BAUDRATE_115200=y -BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" -BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/acmesystems/arietta-g25/genimage.cfg" -BR2_LINUX_KERNEL=y -BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.315" -BR2_LINUX_KERNEL_DEFCONFIG="at91_dt" -BR2_LINUX_KERNEL_DTS_SUPPORT=y -BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-ariettag25" -BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y -BR2_TARGET_ROOTFS_EXT2=y -BR2_TARGET_ROOTFS_EXT2_4=y -BR2_TARGET_AT91BOOTSTRAP3=y -BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y -BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git" -BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.10.3" -BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="arietta-128m" -BR2_PACKAGE_HOST_DOSFSTOOLS=y -BR2_PACKAGE_HOST_GENIMAGE=y -BR2_PACKAGE_HOST_MTOOLS=y diff --git a/configs/acmesystems_arietta_g25_256mb_defconfig b/configs/acmesystems_arietta_g25_256mb_defconfig deleted file mode 100644 index c483ae4c573..00000000000 --- a/configs/acmesystems_arietta_g25_256mb_defconfig +++ /dev/null @@ -1,26 +0,0 @@ -BR2_arm=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y -BR2_GLOBAL_PATCH_DIR="board/acmesystems/arietta-g25/patches" -BR2_DOWNLOAD_FORCE_CHECK_HASHES=y -BR2_TARGET_GENERIC_ISSUE="Welcome to Arietta-G25 Buildroot" -BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" -BR2_TARGET_GENERIC_GETTY_BAUDRATE_115200=y -BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" -BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/acmesystems/arietta-g25/genimage.cfg" -BR2_LINUX_KERNEL=y -BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19.315" -BR2_LINUX_KERNEL_DEFCONFIG="at91_dt" -BR2_LINUX_KERNEL_DTS_SUPPORT=y -BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-ariettag25" -BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y -BR2_TARGET_ROOTFS_EXT2=y -BR2_TARGET_ROOTFS_EXT2_4=y -BR2_TARGET_AT91BOOTSTRAP3=y -BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y -BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git" -BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.10.3" -BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="arietta-256m" -BR2_PACKAGE_HOST_DOSFSTOOLS=y -BR2_PACKAGE_HOST_GENIMAGE=y -BR2_PACKAGE_HOST_MTOOLS=y diff --git a/configs/am574x_idk_defconfig b/configs/am574x_idk_defconfig index 5d3ec12ad63..3ec8829ff75 100644 --- a/configs/am574x_idk_defconfig +++ b/configs/am574x_idk_defconfig @@ -1,26 +1,33 @@ BR2_arm=y BR2_cortex_a15=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV7_EABIHF_GLIBC_STABLE=y +BR2_GLOBAL_PATCH_DIR="board/ti/am574x-idk/patches" +BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_SYSTEM_DHCP="eth0" BR2_ROOTFS_POST_BUILD_SCRIPT="board/ti/am574x-idk/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/ti/am574x-idk/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.14" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.18" BR2_LINUX_KERNEL_DEFCONFIG="multi_v7" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="ti/omap/am574x-idk" +BR2_LINUX_KERNEL_DTB_KEEP_DIRNAME=y BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="256M" BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.01" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.04" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="am57xx_evm" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_NEEDS_GNUTLS=y # BR2_TARGET_UBOOT_FORMAT_BIN is not set BR2_TARGET_UBOOT_FORMAT_IMG=y BR2_TARGET_UBOOT_SPL=y diff --git a/configs/amarula_vyasa_rk3288_defconfig b/configs/amarula_vyasa_rk3288_defconfig index f59d78a5b91..cf99702d0c9 100644 --- a/configs/amarula_vyasa_rk3288_defconfig +++ b/configs/amarula_vyasa_rk3288_defconfig @@ -1,7 +1,7 @@ BR2_arm=y BR2_cortex_a17=y BR2_ARM_FPU_NEON_VFPV4=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y BR2_GLOBAL_PATCH_DIR="board/amarula/vyasa/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_HOSTNAME="vyasa-rk3288" @@ -11,13 +11,13 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/amarula/vyasa/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.1.91" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.8" BR2_LINUX_KERNEL_DEFCONFIG="multi_v7" BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/amarula/vyasa/linux_gmac.fragment" BR2_LINUX_KERNEL_UIMAGE=y BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x02000000" BR2_LINUX_KERNEL_DTS_SUPPORT=y -BR2_LINUX_KERNEL_INTREE_DTS_NAME="rk3288-vyasa" +BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3288-vyasa" BR2_LINUX_KERNEL_INSTALL_TARGET=y BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_EXT2_4=y @@ -25,11 +25,12 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="512M" BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.10" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.01" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="vyasa-rk3288" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_NEEDS_GNUTLS=y BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y BR2_TARGET_UBOOT_SPL=y BR2_TARGET_UBOOT_SPL_NAME="spl/u-boot-spl-dtb.bin tpl/u-boot-tpl.bin" diff --git a/configs/andes_ae350_45_defconfig b/configs/andes_ae350_45_defconfig index 7b5a6f73c6c..80b780b6e09 100644 --- a/configs/andes_ae350_45_defconfig +++ b/configs/andes_ae350_45_defconfig @@ -1,7 +1,9 @@ BR2_riscv=y BR2_RISCV_ISA_RVC=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_0=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_RISCV64_LP64D_GLIBC_STABLE=y BR2_GLOBAL_PATCH_DIR="board/andes/ae350/patches" +BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" BR2_ROOTFS_OVERLAY="board/andes/ae350/rootfs_overlay" BR2_ROOTFS_POST_BUILD_SCRIPT="board/andes/ae350/post-build.sh" @@ -9,7 +11,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/andes/ae350/genimage_sdcard.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,andestech,linux,v6.0.y_ae350-ax45mp)/linux-v6.0.y_ae350-ax45mp.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,andestech,linux,v6.0.y-andes)/linux-v6.0.y-andes.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="ae350_ax45mp" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="andes/ae350_ax45mp" @@ -17,18 +19,19 @@ BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_EXT2_4=y # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_OPENSBI=y -BR2_TARGET_OPENSBI_CUSTOM_TARBALL=y -BR2_TARGET_OPENSBI_CUSTOM_TARBALL_LOCATION="$(call github,riscv,opensbi,22f38ee6c658a660083aa45c4ec6c72f66a17260)/opensbi-22f38ee6c658a660083aa45c4ec6c72f66a17260.tar.gz" -BR2_TARGET_OPENSBI_PLAT="andes/ae350" +BR2_TARGET_OPENSBI_CUSTOM_VERSION=y +BR2_TARGET_OPENSBI_CUSTOM_VERSION_VALUE="1.6" +BR2_TARGET_OPENSBI_PLAT="generic" # BR2_TARGET_OPENSBI_INSTALL_JUMP_IMG is not set BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y -BR2_TARGET_UBOOT_CUSTOM_TARBALL=y -BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,u-boot,u-boot,a5dfa3b8a0f7ad555495bad1386613d2de4ba619)/u-boot-a5dfa3b8a0f7ad555495bad1386613d2de4ba619.tar.gz" +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2025.07" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="ae350_rv64_spl_xip" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/andes/ae350/uboot.config.fragment" BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_NEEDS_GNUTLS=y BR2_TARGET_UBOOT_NEEDS_OPENSBI=y # BR2_TARGET_UBOOT_FORMAT_BIN is not set BR2_TARGET_UBOOT_FORMAT_CUSTOM=y diff --git a/configs/arcturus_ucp1020_defconfig b/configs/arcturus_ucp1020_defconfig index 8e489f7f192..c0423032bc5 100644 --- a/configs/arcturus_ucp1020_defconfig +++ b/configs/arcturus_ucp1020_defconfig @@ -1,6 +1,8 @@ BR2_powerpc=y BR2_powerpc_8548=y BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_4=y +BR2_GLOBAL_PATCH_DIR="board/arcturus/ppc-ucp1020/patches" +BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_HOSTNAME="UCP1020" BR2_TARGET_GENERIC_ISSUE="Welcome to Arcturus uCP1020 System on Module" BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" @@ -8,6 +10,7 @@ BR2_SYSTEM_DHCP="eth0" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,ArcturusNetworks,uCP1020-kernel,v20190618)/linux-v20190618.tar.gz" +BR2_LINUX_KERNEL_LICENSE_FILES="COPYING" BR2_LINUX_KERNEL_DEFCONFIG="ucp1020" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="ucp1020" diff --git a/configs/arm_foundationv8_defconfig b/configs/arm_foundationv8_defconfig index 921fbf62c58..61e2f359ce3 100644 --- a/configs/arm_foundationv8_defconfig +++ b/configs/arm_foundationv8_defconfig @@ -3,6 +3,7 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_15=y BR2_GLOBAL_PATCH_DIR="board/arm/foundation-v8/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0" +BR2_SYSTEM_DHCP="eth0" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.15.7" diff --git a/configs/arm_fvp_ebbr_defconfig b/configs/arm_fvp_ebbr_defconfig index 5aa17278895..665f59c130c 100644 --- a/configs/arm_fvp_ebbr_defconfig +++ b/configs/arm_fvp_ebbr_defconfig @@ -1,12 +1,16 @@ BR2_aarch64=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_10=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_GLIBC_STABLE=y BR2_GLOBAL_PATCH_DIR="board/arm/fvp-ebbr/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y +BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y +BR2_SYSTEM_DHCP="eth0" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/arm/fvp-ebbr/post-image.sh support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/arm/fvp-ebbr/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.10.12" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y BR2_LINUX_KERNEL_NEEDS_HOST_PYTHON3=y @@ -17,7 +21,7 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="200M" # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ARM_TRUSTED_FIRMWARE=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.11" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.14.0" BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="fvp" BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_DTS_PATH="board/arm/fvp-ebbr/fvp-ebbr.dts" BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y @@ -26,17 +30,21 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="ARM_TSP_RAM_LOCATION=tdram FVP_DT_PREFIX=fvp-ebbr" BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_DTC=y BR2_TARGET_GRUB2=y +BR2_TARGET_GRUB2_BUILTIN_MODULES_EFI="boot efi_gop efifwsetup efinet efitextmode ext2 fat halt help linux lsefi lsefimmap lsefisystab minicmd normal part_gpt part_msdos reboot squash4" BR2_TARGET_OPTEE_OS=y -BR2_TARGET_OPTEE_OS_NEEDS_DTC=y +BR2_TARGET_OPTEE_OS_CUSTOM_VERSION=y +BR2_TARGET_OPTEE_OS_CUSTOM_VERSION_VALUE="4.8.0" +BR2_TARGET_OPTEE_OS_NEEDS_PYTHON_CRYPTOGRAPHY=y BR2_TARGET_OPTEE_OS_PLATFORM="vexpress-fvp" -BR2_TARGET_OPTEE_OS_ADDITIONAL_VARIABLES="CFG_ARM_GICV3=y" +BR2_TARGET_OPTEE_OS_ADDITIONAL_VARIABLES="CFG_ARM_GICV3=y CFG_TEE_CORE_LOG_LEVEL=2 CFG_TEE_TA_LOG_LEVEL=2" BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.07" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2025.10" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="vexpress_fvp" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/arm/fvp-ebbr/u-boot.fragment" BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_NEEDS_GNUTLS=y BR2_PACKAGE_HOST_DOSFSTOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_MTOOLS=y diff --git a/configs/aspeed_ast2500evb_defconfig b/configs/aspeed_ast2500evb_defconfig index 2312242e640..2ea5ed774e8 100644 --- a/configs/aspeed_ast2500evb_defconfig +++ b/configs/aspeed_ast2500evb_defconfig @@ -1,24 +1,29 @@ BR2_arm=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_17=y -BR2_TARGET_GENERIC_HOSTNAME="aspeed-evb" -BR2_TARGET_GENERIC_ISSUE="Aspeed EVB" +BR2_arm1176jzf_s=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV6_EABIHF_GLIBC_STABLE=y +BR2_GLOBAL_PATCH_DIR="board/aspeed/ast2500-evb/patches" +BR2_DOWNLOAD_FORCE_CHECK_HASHES=y +BR2_TARGET_GENERIC_HOSTNAME="ast2500-evb" +BR2_TARGET_GENERIC_ISSUE="Aspeed AST2500 EVB" BR2_SYSTEM_DHCP="eth0" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/aspeed/common/post-image.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.17.7" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.16.7" BR2_LINUX_KERNEL_DEFCONFIG="aspeed_g5" BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/aspeed/ast2500-evb/linux.fragment" BR2_LINUX_KERNEL_XZ=y BR2_LINUX_KERNEL_DTS_SUPPORT=y -BR2_LINUX_KERNEL_INTREE_DTS_NAME="aspeed-ast2500-evb" +BR2_LINUX_KERNEL_INTREE_DTS_NAME="aspeed/aspeed-ast2500-evb" BR2_PACKAGE_MTD=y BR2_TARGET_ROOTFS_CPIO=y BR2_TARGET_ROOTFS_CPIO_XZ=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.01" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2025.07" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="evb-ast2500" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/aspeed/ast2500-evb/uboot.fragment" BR2_TARGET_UBOOT_NEEDS_DTC=y diff --git a/configs/aspeed_ast2600evb_defconfig b/configs/aspeed_ast2600evb_defconfig index 104f685200e..056c6aedc1a 100644 --- a/configs/aspeed_ast2600evb_defconfig +++ b/configs/aspeed_ast2600evb_defconfig @@ -1,16 +1,20 @@ BR2_arm=y BR2_cortex_a7=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_17=y -BR2_TARGET_GENERIC_HOSTNAME="aspeed-evb" -BR2_TARGET_GENERIC_ISSUE="Aspeed EVB" +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV7_EABIHF_GLIBC_STABLE=y +BR2_GLOBAL_PATCH_DIR="board/aspeed/ast2600-evb/patches" +BR2_DOWNLOAD_FORCE_CHECK_HASHES=y +BR2_TARGET_GENERIC_HOSTNAME="ast2600-evb" +BR2_TARGET_GENERIC_ISSUE="Aspeed AST2600 EVB" BR2_SYSTEM_DHCP="eth0" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/aspeed/common/post-image.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.17.7" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.16.7" BR2_LINUX_KERNEL_DEFCONFIG="aspeed_g5" BR2_LINUX_KERNEL_DTS_SUPPORT=y -BR2_LINUX_KERNEL_INTREE_DTS_NAME="aspeed-ast2600-evb" +BR2_LINUX_KERNEL_INTREE_DTS_NAME="aspeed/aspeed-ast2600-evb" BR2_PACKAGE_MTD=y BR2_TARGET_ROOTFS_CPIO=y BR2_TARGET_ROOTFS_CPIO_XZ=y @@ -18,7 +22,7 @@ BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_GIT=y BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/openbmc/u-boot.git" -BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="f2b82fa4ba17ed8091fe76c284220006645a293b" +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="66672e5af36fe294df56f8e7942069e3909f3790" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="evb-ast2600" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="DEVICE_TREE=ast2600a1-evb" diff --git a/configs/asus_tinker_rk3288_defconfig b/configs/asus_tinker_rk3288_defconfig index f3a2c4d71d0..8326405536b 100644 --- a/configs/asus_tinker_rk3288_defconfig +++ b/configs/asus_tinker_rk3288_defconfig @@ -1,7 +1,9 @@ BR2_arm=y BR2_cortex_a17=y BR2_ARM_FPU_NEON_VFPV4=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y +BR2_GLOBAL_PATCH_DIR="board/asus/tinker/patches" +BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_HOSTNAME="tinker-rk3288" BR2_TARGET_GENERIC_ISSUE="Welcome to TINKER RK3288!" BR2_ROOTFS_POST_BUILD_SCRIPT="board/asus/tinker/post-build.sh" @@ -9,10 +11,10 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/asus/tinker/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.1.44" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.8" BR2_LINUX_KERNEL_DEFCONFIG="multi_v7" BR2_LINUX_KERNEL_DTS_SUPPORT=y -BR2_LINUX_KERNEL_INTREE_DTS_NAME="rk3288-tinker" +BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3288-tinker" BR2_LINUX_KERNEL_INSTALL_TARGET=y BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_EXT2_4=y @@ -20,11 +22,12 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="512M" BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2023.07" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.01" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="tinker-rk3288" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_NEEDS_GNUTLS=y BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y BR2_TARGET_UBOOT_SPL=y BR2_TARGET_UBOOT_SPL_NAME="spl/u-boot-spl-dtb.bin tpl/u-boot-tpl.bin" diff --git a/configs/at91sam9260eknf_defconfig b/configs/at91sam9260eknf_defconfig deleted file mode 100644 index d505d5b2127..00000000000 --- a/configs/at91sam9260eknf_defconfig +++ /dev/null @@ -1,20 +0,0 @@ -BR2_arm=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y -BR2_LINUX_KERNEL=y -BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.6" -BR2_LINUX_KERNEL_DEFCONFIG="at91_dt" -BR2_LINUX_KERNEL_DTS_SUPPORT=y -BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91sam9260ek" -BR2_TARGET_ROOTFS_UBI=y -BR2_TARGET_AT91BOOTSTRAP3=y -BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y -BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git" -BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.10.3" -BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="at91sam9260eknf_uboot" -BR2_TARGET_UBOOT=y -BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y -BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2016.09.01" -BR2_TARGET_UBOOT_BOARD_DEFCONFIG="at91sam9260ek_nandflash" -BR2_PACKAGE_HOST_SAM_BA=y diff --git a/configs/at91sam9x5ek_defconfig b/configs/at91sam9x5ek_defconfig index 775fcceae37..246d34edef4 100644 --- a/configs/at91sam9x5ek_defconfig +++ b/configs/at91sam9x5ek_defconfig @@ -16,6 +16,7 @@ BR2_TARGET_AT91BOOTSTRAP3=y BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git" BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.10.3" +BR2_TARGET_AT91BOOTSTRAP3_LICENSE_FILES="" BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="at91sam9x5eknf_uboot" BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y diff --git a/configs/at91sam9x5ek_dev_defconfig b/configs/at91sam9x5ek_dev_defconfig index 0f292167361..36441f38e73 100644 --- a/configs/at91sam9x5ek_dev_defconfig +++ b/configs/at91sam9x5ek_dev_defconfig @@ -67,6 +67,7 @@ BR2_TARGET_AT91BOOTSTRAP3=y BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git" BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.10.3" +BR2_TARGET_AT91BOOTSTRAP3_LICENSE_FILES="" BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="at91sam9x5eknf_uboot" BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y diff --git a/configs/at91sam9x5ek_mmc_defconfig b/configs/at91sam9x5ek_mmc_defconfig index a6fd7e05fcb..4c2a6255bca 100644 --- a/configs/at91sam9x5ek_mmc_defconfig +++ b/configs/at91sam9x5ek_mmc_defconfig @@ -17,6 +17,7 @@ BR2_TARGET_AT91BOOTSTRAP3=y BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git" BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.10.3" +BR2_TARGET_AT91BOOTSTRAP3_LICENSE_FILES="" BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="at91sam9x5eksd_uboot" BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y diff --git a/configs/at91sam9x5ek_mmc_dev_defconfig b/configs/at91sam9x5ek_mmc_dev_defconfig index 344c6c2eae4..908907acda5 100644 --- a/configs/at91sam9x5ek_mmc_dev_defconfig +++ b/configs/at91sam9x5ek_mmc_dev_defconfig @@ -69,6 +69,7 @@ BR2_TARGET_AT91BOOTSTRAP3=y BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git" BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.10.3" +BR2_TARGET_AT91BOOTSTRAP3_LICENSE_FILES="" BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="at91sam9x5eksd_uboot" BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y diff --git a/configs/atmel_sama5d3xek_defconfig b/configs/atmel_sama5d3xek_defconfig deleted file mode 100644 index 2fcd7e002bf..00000000000 --- a/configs/atmel_sama5d3xek_defconfig +++ /dev/null @@ -1,26 +0,0 @@ -BR2_arm=y -BR2_cortex_a5=y -BR2_ARM_ENABLE_VFP=y -BR2_ARM_INSTRUCTIONS_THUMB2=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y -BR2_LINUX_KERNEL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,linux4sam,linux-at91,linux4sam_5.8)/linux-linux4sam_5.8.tar.gz" -BR2_LINUX_KERNEL_DEFCONFIG="sama5" -BR2_LINUX_KERNEL_DTS_SUPPORT=y -BR2_LINUX_KERNEL_INTREE_DTS_NAME="sama5d31ek sama5d33ek sama5d34ek sama5d35ek sama5d36ek" -BR2_TARGET_ROOTFS_UBI=y -BR2_TARGET_ROOTFS_UBI_SUBSIZE=2048 -BR2_TARGET_ROOTFS_UBIFS_LEBSIZE=0x1f000 -BR2_TARGET_AT91BOOTSTRAP3=y -BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL=y -BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL_LOCATION="$(call github,linux4sam,at91bootstrap,v3.10.3)/at91bootstrap3-v3.10.3.tar.gz" -BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="sama5d3xeknf_uboot" -BR2_TARGET_UBOOT=y -BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y -BR2_TARGET_UBOOT_CUSTOM_TARBALL=y -BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,linux4sam,u-boot-at91,linux4sam_5.8)/u-boot-at91-linux4sam_5.8.tar.gz" -BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sama5d3xek_nandflash" -BR2_TARGET_UBOOT_NEEDS_DTC=y -BR2_TARGET_UBOOT_SPL=y -BR2_PACKAGE_HOST_SAM_BA=y diff --git a/configs/bananapi_m2_berry_defconfig b/configs/bananapi_m2_berry_defconfig index 200257ac0d5..35909fbb99d 100644 --- a/configs/bananapi_m2_berry_defconfig +++ b/configs/bananapi_m2_berry_defconfig @@ -1,16 +1,18 @@ BR2_arm=y BR2_cortex_a7=y -BR2_TOOLCHAIN_EXTERNAL=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y +BR2_GLOBAL_PATCH_DIR="board/bananapi/bananapi-m2-berry/patches" +BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_ISSUE="Welcome to Bananapi M2 Berry" BR2_ROOTFS_POST_BUILD_SCRIPT="board/bananapi/bananapi-m2-berry/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/bananapi/bananapi-m2-berry/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.1.57" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.8" BR2_LINUX_KERNEL_DEFCONFIG="sunxi" BR2_LINUX_KERNEL_DTS_SUPPORT=y -BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun8i-v40-bananapi-m2-berry" +BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun8i-v40-bananapi-m2-berry" BR2_LINUX_KERNEL_INSTALL_TARGET=y BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_EXT2_4=y @@ -18,11 +20,12 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2023.10" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.01" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="bananapi_m2_berry" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_NEEDS_GNUTLS=y BR2_TARGET_UBOOT_FORMAT_CUSTOM=y BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-sunxi-with-spl.bin" BR2_PACKAGE_HOST_DOSFSTOOLS=y diff --git a/configs/bananapi_m2_ultra_defconfig b/configs/bananapi_m2_ultra_defconfig index b67a9d3f5da..190481837e1 100644 --- a/configs/bananapi_m2_ultra_defconfig +++ b/configs/bananapi_m2_ultra_defconfig @@ -1,16 +1,18 @@ BR2_arm=y BR2_cortex_a7=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y +BR2_GLOBAL_PATCH_DIR="board/bananapi/bananapi-m2-ultra/patches" +BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_ISSUE="Welcome to Bananapi M2 Ultra" BR2_ROOTFS_POST_BUILD_SCRIPT="board/bananapi/bananapi-m2-ultra/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/bananapi/bananapi-m2-ultra/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.1.57" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.8" BR2_LINUX_KERNEL_DEFCONFIG="sunxi" BR2_LINUX_KERNEL_DTS_SUPPORT=y -BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun8i-r40-bananapi-m2-ultra" +BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun8i-r40-bananapi-m2-ultra" BR2_LINUX_KERNEL_INSTALL_TARGET=y BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_EXT2_4=y @@ -18,11 +20,12 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2023.10" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.01" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="bananapi_m2_berry" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_NEEDS_GNUTLS=y BR2_TARGET_UBOOT_FORMAT_CUSTOM=y BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-sunxi-with-spl.bin" BR2_PACKAGE_HOST_DOSFSTOOLS=y diff --git a/configs/beaglebone_defconfig b/configs/beaglebone_defconfig index bb63fda3759..134ec3fe0c8 100644 --- a/configs/beaglebone_defconfig +++ b/configs/beaglebone_defconfig @@ -1,7 +1,9 @@ BR2_arm=y BR2_cortex_a8=y BR2_ARM_FPU_VFPV3=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV7_EABIHF_GLIBC_STABLE=y BR2_GLOBAL_PATCH_DIR="board/beagleboard/beaglebone/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y @@ -9,14 +11,15 @@ BR2_ROOTFS_POST_BUILD_SCRIPT="board/beagleboard/beaglebone/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/beagleboard/beaglebone/genimage.cfg" BR2_LINUX_KERNEL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,beagleboard,linux,6.12.23-ti-arm32-r11)/linux-6.12.23-ti-arm32-r11.tar.gz" -BR2_LINUX_KERNEL_DEFCONFIG="bb.org" +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.56" +BR2_LINUX_KERNEL_DEFCONFIG="omap2plus" BR2_LINUX_KERNEL_DTS_SUPPORT=y -BR2_LINUX_KERNEL_INTREE_DTS_NAME="ti/omap/am335x-evm ti/omap/am335x-bone ti/omap/am335x-boneblack ti/omap/am335x-bonegreen ti/omap/am335x-evmsk ti/omap/am335x-boneblue ti/omap/am335x-boneblack-wireless ti/omap/am335x-bonegreen-wireless" +BR2_LINUX_KERNEL_INTREE_DTS_NAME="ti/omap/am335x-evm ti/omap/am335x-bone ti/omap/am335x-boneblack ti/omap/am335x-bonegreen ti/omap/am335x-evmsk ti/omap/am335x-boneblue ti/omap/am335x-boneblack-wireless ti/omap/am335x-bonegreen-wireless ti/omap/am335x-bonegreen-eco" BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y BR2_PACKAGE_XZ=y +BR2_PACKAGE_AM33X_CM3=y BR2_PACKAGE_KMOD=y BR2_PACKAGE_KMOD_TOOLS=y BR2_TARGET_ROOTFS_EXT2=y @@ -24,7 +27,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2025.07" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.10" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="am335x_evm" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y diff --git a/configs/beagleboneai64_defconfig b/configs/beagleboneai64_defconfig index 0429dd63e17..b41ea09f3e4 100644 --- a/configs/beagleboneai64_defconfig +++ b/configs/beagleboneai64_defconfig @@ -1,6 +1,8 @@ BR2_aarch64=y BR2_cortex_a72=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_GLIBC_STABLE=y BR2_GLOBAL_PATCH_DIR="board/beagleboard/beagleboneai64/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_SYSTEM_DHCP="eth0" @@ -9,7 +11,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/beagleboard/beagleboneai64/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.30" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.16" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="ti/k3-j721e-beagleboneai64" @@ -18,8 +20,7 @@ BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_ROOTFS_EXT2_SIZE="256M" BR2_TARGET_ARM_TRUSTED_FIRMWARE=y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.10" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_LATEST_LTS_2_12_VERSION=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="k3" BR2_TARGET_ARM_TRUSTED_FIRMWARE_TARGET_BOARD="generic" BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL32_OPTEE=y @@ -27,22 +28,23 @@ BR2_TARGET_OPTEE_OS=y BR2_TARGET_OPTEE_OS_PLATFORM="k3-j721e" BR2_TARGET_TI_K3_R5_LOADER=y BR2_TARGET_TI_K3_R5_LOADER_CUSTOM_VERSION=y -BR2_TARGET_TI_K3_R5_LOADER_CUSTOM_VERSION_VALUE="2024.04" +BR2_TARGET_TI_K3_R5_LOADER_CUSTOM_VERSION_VALUE="2026.01" BR2_TARGET_TI_K3_R5_LOADER_BOARD_DEFCONFIG="j721e_beagleboneai64_r5" BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.04" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.01" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="j721e_beagleboneai64_a72" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y +BR2_TARGET_UBOOT_NEEDS_OPTEE_TEE=y +BR2_TARGET_UBOOT_NEEDS_OPTEE_TEE_RAW_BIN=y BR2_TARGET_UBOOT_USE_BINMAN=y # BR2_TARGET_UBOOT_FORMAT_BIN is not set BR2_TARGET_UBOOT_FORMAT_IMG=y BR2_TARGET_UBOOT_SPL=y BR2_TARGET_UBOOT_SPL_NAME="tispl.bin_unsigned" -BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="TEE=$(BINARIES_DIR)/tee-pager_v2.bin" BR2_PACKAGE_HOST_DOSFSTOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_MTOOLS=y diff --git a/configs/beagleboneai_defconfig b/configs/beagleboneai_defconfig index 38db1848176..ccabb8c6ba4 100644 --- a/configs/beagleboneai_defconfig +++ b/configs/beagleboneai_defconfig @@ -1,6 +1,8 @@ BR2_arm=y BR2_cortex_a15=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV7_EABIHF_GLIBC_STABLE=y BR2_GLOBAL_PATCH_DIR="board/beagleboard/beagleboneai/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_SYSTEM_DHCP="eth0" @@ -9,19 +11,21 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/beagleboard/beagleboneai/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.217" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.50" BR2_LINUX_KERNEL_DEFCONFIG="omap2plus" BR2_LINUX_KERNEL_DTS_SUPPORT=y -BR2_LINUX_KERNEL_INTREE_DTS_NAME="am5729-beagleboneai" +BR2_LINUX_KERNEL_INTREE_DTS_NAME="ti/omap/am5729-beagleboneai" BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2021.04" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2025.04" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="am57xx_evm" BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_NEEDS_GNUTLS=y # BR2_TARGET_UBOOT_FORMAT_BIN is not set BR2_TARGET_UBOOT_FORMAT_IMG=y BR2_TARGET_UBOOT_SPL=y diff --git a/configs/beagleplay_defconfig b/configs/beagleplay_defconfig index 42aa2fbd6ed..9e45680c31c 100644 --- a/configs/beagleplay_defconfig +++ b/configs/beagleplay_defconfig @@ -1,5 +1,7 @@ BR2_aarch64=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_10=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_GLIBC_STABLE=y BR2_GLOBAL_PATCH_DIR="board/beagleboard/beagleplay/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_ROOTFS_POST_BUILD_SCRIPT="board/beagleboard/beagleplay/post-build.sh" @@ -7,7 +9,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT_ARGS="-c board/beagleboard/beagleplay/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.10" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="7.2.10" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="ti/k3-am625-beagleplay" @@ -23,7 +25,7 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="256M" # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ARM_TRUSTED_FIRMWARE=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.11" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.15.0" BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="k3" BR2_TARGET_ARM_TRUSTED_FIRMWARE_TARGET_BOARD="lite" BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL32_OPTEE=y @@ -31,17 +33,19 @@ BR2_TARGET_OPTEE_OS=y BR2_TARGET_OPTEE_OS_PLATFORM="k3-am62x" BR2_TARGET_TI_K3_R5_LOADER=y BR2_TARGET_TI_K3_R5_LOADER_CUSTOM_VERSION=y -BR2_TARGET_TI_K3_R5_LOADER_CUSTOM_VERSION_VALUE="2024.07" +BR2_TARGET_TI_K3_R5_LOADER_CUSTOM_VERSION_VALUE="2026.07" BR2_TARGET_TI_K3_R5_LOADER_BOARD_DEFCONFIG="am62x_beagleplay_r5" BR2_TARGET_TI_K3_R5_LOADER_TIBOOT3_BIN="tiboot3-am62x-gp-evm.bin" BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.07" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.07" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="am62x_beagleplay_a53" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y +BR2_TARGET_UBOOT_NEEDS_OPTEE_TEE=y +BR2_TARGET_UBOOT_NEEDS_OPTEE_TEE_RAW_BIN=y BR2_TARGET_UBOOT_USE_BINMAN=y # BR2_TARGET_UBOOT_FORMAT_BIN is not set BR2_TARGET_UBOOT_FORMAT_IMG=y @@ -49,7 +53,6 @@ BR2_TARGET_UBOOT_FORMAT_CUSTOM=y BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.img_unsigned" BR2_TARGET_UBOOT_SPL=y BR2_TARGET_UBOOT_SPL_NAME="tispl.bin_unsigned" -BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="TEE=$(BINARIES_DIR)/tee-pager_v2.bin" BR2_PACKAGE_HOST_DOSFSTOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_MTOOLS=y diff --git a/configs/beaglev_fire_defconfig b/configs/beaglev_fire_defconfig index bfaa8208e9a..a5cda23242f 100644 --- a/configs/beaglev_fire_defconfig +++ b/configs/beaglev_fire_defconfig @@ -1,6 +1,6 @@ BR2_riscv=y BR2_RISCV_ISA_RVC=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y BR2_GLOBAL_PATCH_DIR="board/beagleboard/beaglev_fire/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_SYSTEM_DHCP="eth0" @@ -8,7 +8,7 @@ BR2_ROOTFS_OVERLAY="board/beagleboard/beaglev_fire/rootfs-overlay/" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/beagleboard/beaglev_fire/post-image.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,linux4microchip,linux,linux4microchip+fpga-2024.09.1)/linux-linux4microchip+fpga-2024.09.1.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,linux4microchip,linux,linux4microchip+fpga-2025.10)/linux-linux4microchip+fpga-2025.10.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="mpfs" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="microchip/mpfs-beaglev-fire" @@ -19,7 +19,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_TARBALL=y -BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,linux4microchip,u-boot-mchp,linux4microchip+fpga-2024.09)/uboot-linux4microchip+fpga-2024.09.tar.gz" +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,linux4microchip,u-boot-mchp,linux4microchip+fpga-2025.10)/uboot-linux4microchip+fpga-2025.10.tar.gz" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="beaglev_fire" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/beagleboard/beaglev_fire/uboot-fragment.config" BR2_TARGET_UBOOT_NEEDS_DTC=y diff --git a/configs/beagley_ai_defconfig b/configs/beagley_ai_defconfig index 67516d86814..d0a3bf58c45 100644 --- a/configs/beagley_ai_defconfig +++ b/configs/beagley_ai_defconfig @@ -11,7 +11,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/beagleboard/beagley-ai/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.15.6" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.16" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="ti/k3-am67a-beagley-ai" @@ -28,22 +28,23 @@ BR2_TARGET_OPTEE_OS=y BR2_TARGET_OPTEE_OS_PLATFORM="k3-am62x" BR2_TARGET_TI_K3_R5_LOADER=y BR2_TARGET_TI_K3_R5_LOADER_CUSTOM_VERSION=y -BR2_TARGET_TI_K3_R5_LOADER_CUSTOM_VERSION_VALUE="2025.07" +BR2_TARGET_TI_K3_R5_LOADER_CUSTOM_VERSION_VALUE="2026.01" BR2_TARGET_TI_K3_R5_LOADER_BOARD_DEFCONFIG="am67a_beagley_ai_r5" BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2025.07" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.01" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="am67a_beagley_ai_a53" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y +BR2_TARGET_UBOOT_NEEDS_OPTEE_TEE=y +BR2_TARGET_UBOOT_NEEDS_OPTEE_TEE_RAW_BIN=y BR2_TARGET_UBOOT_USE_BINMAN=y # BR2_TARGET_UBOOT_FORMAT_BIN is not set BR2_TARGET_UBOOT_FORMAT_IMG=y BR2_TARGET_UBOOT_SPL=y BR2_TARGET_UBOOT_SPL_NAME="tispl.bin" -BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="TEE=$(BINARIES_DIR)/tee-pager_v2.bin" BR2_PACKAGE_HOST_DOSFSTOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_MTOOLS=y diff --git a/configs/ci20_defconfig b/configs/ci20_defconfig index bb4863cb1dd..4fd7d48c388 100644 --- a/configs/ci20_defconfig +++ b/configs/ci20_defconfig @@ -1,14 +1,14 @@ BR2_mipsel=y BR2_mips_xburst=y # BR2_MIPS_SOFT_FLOAT is not set -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y BR2_TARGET_GENERIC_GETTY_PORT="ttyS4" BR2_SYSTEM_DHCP="eth0" BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/ci20/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.1.81" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.38" BR2_LINUX_KERNEL_DEFCONFIG="ci20" BR2_LINUX_KERNEL_INSTALL_TARGET=y BR2_TARGET_ROOTFS_EXT2=y @@ -16,7 +16,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.01" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.07" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="ci20_mmc" BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_TARGET_UBOOT_FORMAT_IMG=y diff --git a/configs/cubieboard1_defconfig b/configs/cubieboard1_defconfig index 9f3ad653865..217303dc475 100644 --- a/configs/cubieboard1_defconfig +++ b/configs/cubieboard1_defconfig @@ -1,6 +1,8 @@ BR2_arm=y BR2_cortex_a8=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV7_EABIHF_GLIBC_STABLE=y BR2_GLOBAL_PATCH_DIR="board/cubietech/cubieboard1/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_ROOTFS_OVERLAY="board/cubietech/cubieboard1/rootfs_overlay" @@ -8,7 +10,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/cubietech/cubieboard1/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.24" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="7.1.3" BR2_LINUX_KERNEL_DEFCONFIG="sunxi" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun4i-a10-cubieboard" @@ -18,7 +20,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2025.04" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.07" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="Cubieboard" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y diff --git a/configs/cubieboard2_defconfig b/configs/cubieboard2_defconfig index 180677923ad..a0d6d968c4c 100644 --- a/configs/cubieboard2_defconfig +++ b/configs/cubieboard2_defconfig @@ -1,7 +1,9 @@ BR2_arm=y BR2_cortex_a7=y BR2_ARM_FPU_NEON_VFPV4=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV7_EABIHF_GLIBC_STABLE=y BR2_GLOBAL_PATCH_DIR="board/cubietech/cubieboard2/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_ROOTFS_OVERLAY="board/cubietech/cubieboard2/rootfs_overlay" @@ -9,7 +11,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/cubietech/cubieboard2/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.24" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="7.1.3" BR2_LINUX_KERNEL_DEFCONFIG="multi_v7" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun7i-a20-cubieboard2" @@ -19,7 +21,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2025.04" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.07" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="Cubieboard2" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y diff --git a/configs/engicam_imx6qdl_icore_defconfig b/configs/engicam_imx6qdl_icore_defconfig deleted file mode 100644 index 2ac415e3358..00000000000 --- a/configs/engicam_imx6qdl_icore_defconfig +++ /dev/null @@ -1,33 +0,0 @@ -BR2_arm=y -BR2_cortex_a9=y -BR2_ARM_ENABLE_NEON=y -BR2_ARM_ENABLE_VFP=y -BR2_ARM_FPU_VFPV3=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_0=y -BR2_TARGET_GENERIC_ISSUE="Welcome to Engicam i.CoreM6 Quad/Dual/DualLite/Solo" -BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3" -BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" -BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/engicam/icorem6/genimage.cfg" -BR2_LINUX_KERNEL=y -BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.0" -BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7" -BR2_LINUX_KERNEL_UIMAGE=y -BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x10008000" -BR2_LINUX_KERNEL_DTS_SUPPORT=y -BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6dl-icore imx6q-icore imx6q-icore-ofcap10 imx6q-icore-ofcap12" -BR2_TARGET_ROOTFS_EXT2=y -BR2_TARGET_ROOTFS_EXT2_4=y -BR2_TARGET_UBOOT=y -BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y -BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.01" -BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx6qdl_icore_mmc" -BR2_TARGET_UBOOT_NEEDS_DTC=y -BR2_TARGET_UBOOT_NEEDS_OPENSSL=y -BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y -BR2_TARGET_UBOOT_SPL=y -BR2_TARGET_UBOOT_SPL_NAME="SPL" -BR2_PACKAGE_HOST_DOSFSTOOLS=y -BR2_PACKAGE_HOST_GENIMAGE=y -BR2_PACKAGE_HOST_MTOOLS=y diff --git a/configs/engicam_imx6qdl_icore_qt5_defconfig b/configs/engicam_imx6qdl_icore_qt5_defconfig deleted file mode 100644 index 8b0c8bbe287..00000000000 --- a/configs/engicam_imx6qdl_icore_qt5_defconfig +++ /dev/null @@ -1,60 +0,0 @@ -BR2_arm=y -BR2_cortex_a9=y -BR2_ARM_ENABLE_NEON=y -BR2_ARM_ENABLE_VFP=y -BR2_ARM_FPU_VFPV3=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_13=y -BR2_TOOLCHAIN_BUILDROOT_CXX=y -BR2_TARGET_GENERIC_ISSUE="Welcome to Engicam i.CoreM6 Quad/Dual/DualLite/Solo" -BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y -BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3" -BR2_ROOTFS_OVERLAY="board/engicam/icorem6/rootfs_overlay" -BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" -BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/engicam/icorem6/genimage.cfg" -BR2_LINUX_KERNEL=y -BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.13" -BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7" -BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/engicam/icorem6/linux_qt5.fragment" -BR2_LINUX_KERNEL_UIMAGE=y -BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x10008000" -BR2_LINUX_KERNEL_DTS_SUPPORT=y -BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6dl-icore imx6q-icore imx6q-icore-ofcap10 imx6q-icore-ofcap12" -BR2_PACKAGE_BITSTREAM_VERA=y -BR2_PACKAGE_CANTARELL=y -BR2_PACKAGE_DEJAVU=y -BR2_PACKAGE_FONT_AWESOME=y -BR2_PACKAGE_GHOSTSCRIPT_FONTS=y -BR2_PACKAGE_INCONSOLATA=y -BR2_PACKAGE_LIBERATION=y -BR2_PACKAGE_GLMARK2=y -BR2_PACKAGE_KMSCUBE=y -BR2_PACKAGE_MESA3D_DEMOS=y -BR2_PACKAGE_QT5CINEX=y -BR2_PACKAGE_QT5CINEX_HD=y -BR2_PACKAGE_MESA3D=y -BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_ETNAVIV=y -BR2_PACKAGE_MESA3D_OPENGL_EGL=y -BR2_PACKAGE_MESA3D_OPENGL_ES=y -BR2_PACKAGE_QT5=y -BR2_PACKAGE_QT5BASE_OPENGL_LIB=y -BR2_PACKAGE_QT5BASE_LINUXFB=y -BR2_PACKAGE_QT5BASE_FONTCONFIG=y -BR2_PACKAGE_QT5BASE_GIF=y -BR2_PACKAGE_QT5BASE_JPEG=y -BR2_TARGET_ROOTFS_EXT2=y -BR2_TARGET_ROOTFS_EXT2_4=y -BR2_TARGET_ROOTFS_EXT2_SIZE="120M" -BR2_TARGET_UBOOT=y -BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y -BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.07" -BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx6qdl_icore_mmc" -BR2_TARGET_UBOOT_NEEDS_DTC=y -BR2_TARGET_UBOOT_NEEDS_OPENSSL=y -BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y -BR2_TARGET_UBOOT_SPL=y -BR2_TARGET_UBOOT_SPL_NAME="SPL" -BR2_PACKAGE_HOST_DOSFSTOOLS=y -BR2_PACKAGE_HOST_GENIMAGE=y -BR2_PACKAGE_HOST_MTOOLS=y diff --git a/configs/engicam_imx6qdl_icore_rqs_defconfig b/configs/engicam_imx6qdl_icore_rqs_defconfig deleted file mode 100644 index 7d4d4e3df45..00000000000 --- a/configs/engicam_imx6qdl_icore_rqs_defconfig +++ /dev/null @@ -1,33 +0,0 @@ -BR2_arm=y -BR2_cortex_a9=y -BR2_ARM_ENABLE_NEON=y -BR2_ARM_ENABLE_VFP=y -BR2_ARM_FPU_VFPV3=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_0=y -BR2_TARGET_GENERIC_ISSUE="Welcome to Engicam i.CoreM6 Quad/Dual/DualLite/Solo RQS Starter Kit" -BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3" -BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" -BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/engicam/icorem6_rqs/genimage.cfg" -BR2_LINUX_KERNEL=y -BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.0" -BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7" -BR2_LINUX_KERNEL_UIMAGE=y -BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x10008000" -BR2_LINUX_KERNEL_DTS_SUPPORT=y -BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6dl-icore-rqs imx6q-icore-rqs" -BR2_TARGET_ROOTFS_EXT2=y -BR2_TARGET_ROOTFS_EXT2_4=y -BR2_TARGET_UBOOT=y -BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y -BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.01" -BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx6qdl_icore_rqs" -BR2_TARGET_UBOOT_NEEDS_DTC=y -BR2_TARGET_UBOOT_NEEDS_OPENSSL=y -BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y -BR2_TARGET_UBOOT_SPL=y -BR2_TARGET_UBOOT_SPL_NAME="SPL" -BR2_PACKAGE_HOST_DOSFSTOOLS=y -BR2_PACKAGE_HOST_GENIMAGE=y -BR2_PACKAGE_HOST_MTOOLS=y diff --git a/configs/engicam_imx6ul_geam_defconfig b/configs/engicam_imx6ul_geam_defconfig deleted file mode 100644 index ed4b491ebe1..00000000000 --- a/configs/engicam_imx6ul_geam_defconfig +++ /dev/null @@ -1,33 +0,0 @@ -BR2_arm=y -BR2_cortex_a9=y -BR2_ARM_ENABLE_NEON=y -BR2_ARM_ENABLE_VFP=y -BR2_ARM_FPU_VFPV3=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y -BR2_TARGET_GENERIC_ISSUE="Welcome to Engicam GEAM6UL Starter Kit" -BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0" -BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" -BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/engicam/geam6ul/genimage.cfg" -BR2_LINUX_KERNEL=y -BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.5" -BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7" -BR2_LINUX_KERNEL_UIMAGE=y -BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x80008000" -BR2_LINUX_KERNEL_DTS_SUPPORT=y -BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6ul-geam-kit" -BR2_TARGET_ROOTFS_EXT2=y -BR2_TARGET_ROOTFS_EXT2_4=y -BR2_TARGET_UBOOT=y -BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y -BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.07-rc1" -BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx6ul_geam_mmc" -BR2_TARGET_UBOOT_NEEDS_DTC=y -BR2_TARGET_UBOOT_NEEDS_OPENSSL=y -BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y -BR2_TARGET_UBOOT_SPL=y -BR2_TARGET_UBOOT_SPL_NAME="SPL" -BR2_PACKAGE_HOST_DOSFSTOOLS=y -BR2_PACKAGE_HOST_GENIMAGE=y -BR2_PACKAGE_HOST_MTOOLS=y diff --git a/configs/engicam_imx6ul_isiot_defconfig b/configs/engicam_imx6ul_isiot_defconfig deleted file mode 100644 index 1377022c30e..00000000000 --- a/configs/engicam_imx6ul_isiot_defconfig +++ /dev/null @@ -1,33 +0,0 @@ -BR2_arm=y -BR2_cortex_a9=y -BR2_ARM_ENABLE_NEON=y -BR2_ARM_ENABLE_VFP=y -BR2_ARM_FPU_VFPV3=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_0=y -BR2_TARGET_GENERIC_ISSUE="Welcome to Engicam Is.IoT eMMC Starter Kit" -BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0" -BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" -BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/engicam/isiot/genimage.cfg" -BR2_LINUX_KERNEL=y -BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.0" -BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7" -BR2_LINUX_KERNEL_UIMAGE=y -BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x80008000" -BR2_LINUX_KERNEL_DTS_SUPPORT=y -BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6ul-isiot-emmc" -BR2_TARGET_ROOTFS_EXT2=y -BR2_TARGET_ROOTFS_EXT2_4=y -BR2_TARGET_UBOOT=y -BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y -BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.01" -BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx6ul_isiot_emmc" -BR2_TARGET_UBOOT_NEEDS_DTC=y -BR2_TARGET_UBOOT_NEEDS_OPENSSL=y -BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y -BR2_TARGET_UBOOT_SPL=y -BR2_TARGET_UBOOT_SPL_NAME="SPL" -BR2_PACKAGE_HOST_DOSFSTOOLS=y -BR2_PACKAGE_HOST_GENIMAGE=y -BR2_PACKAGE_HOST_MTOOLS=y diff --git a/configs/freescale_imx6ullevk_defconfig b/configs/freescale_imx6ullevk_defconfig index 3d9e0869ac8..99bbff605b6 100644 --- a/configs/freescale_imx6ullevk_defconfig +++ b/configs/freescale_imx6ullevk_defconfig @@ -8,7 +8,7 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,nxp-imx,linux-imx,lf-6.12.3-1.0.0)/linux-imx-lf-6.12.3-1.0.0.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,nxp-imx,linux-imx,lf-6.12.49-2.2.0)/linux-imx-lf-6.12.49-2.2.0.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="imx_v7" BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/freescale/imx6ullevk/linux_sdma.fragment" BR2_LINUX_KERNEL_DTS_SUPPORT=y @@ -22,9 +22,10 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BOARDNAME="mx6ull_14x14_evk" BR2_TARGET_UBOOT_CUSTOM_TARBALL=y -BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,nxp-imx,uboot-imx,lf-6.12.3-1.0.0)/uboot-imx-lf-6.12.3-1.0.0.tar.gz" +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,nxp-imx,uboot-imx,lf-6.12.49-2.2.0)/uboot-imx-lf-6.12.49-2.2.0.tar.gz" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_NEEDS_GNUTLS=y BR2_TARGET_UBOOT_FORMAT_IMX=y BR2_PACKAGE_HOST_DOSFSTOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y diff --git a/configs/freescale_imx91frdm_defconfig b/configs/freescale_imx91frdm_defconfig index 8a233afb50d..7fc2fd59597 100644 --- a/configs/freescale_imx91frdm_defconfig +++ b/configs/freescale_imx91frdm_defconfig @@ -10,7 +10,7 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyLP0" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/imx9-bootloader-prepare.sh board/freescale/common/imx/post-image.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,jolivain,linux-imx,lf-6.6.36-2.1.0-imx91frdm)/linux-imx-lf-6.6.36-2.1.0-imx91frdm.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,nxp-imx,linux-imx,lf-6.18.20-2.0.0)/linux-imx-lf-6.18.20-2.0.0.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="imx_v8" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/imx91-11x11-frdm" @@ -24,14 +24,15 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_ROOTFS_EXT2_SIZE="120M" BR2_TARGET_ARM_TRUSTED_FIRMWARE=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL=y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,nxp-imx,imx-atf,lf-6.6.36-2.1.0)/imx-atf-lf-6.6.36-2.1.0.tar.gz" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,nxp-imx,imx-atf,lf-6.18.20-2.0.0)/imx-atf-lf-6.18.20-2.0.0.tar.gz" BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx91" BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_TARBALL=y -BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,jolivain,uboot-imx,lf-6.6.36-2.1.0-imx91frdm)/uboot-imx-lf-6.6.36-2.1.0-imx91frdm.tar.gz" +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,nxp-imx,uboot-imx,lf-6.18.20-2.0.0)/uboot-imx-lf-6.18.20-2.0.0.tar.gz" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx91_11x11_frdm" +BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/freescale/imx91frdm/uboot.fragment" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_TARGET_UBOOT_NEEDS_GNUTLS=y diff --git a/configs/freescale_imx93evk_defconfig b/configs/freescale_imx93evk_defconfig index 11407478251..0a398593423 100644 --- a/configs/freescale_imx93evk_defconfig +++ b/configs/freescale_imx93evk_defconfig @@ -25,6 +25,13 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,nxp-imx,imx-atf,lf-6.12.3-1.0.0)/imx-atf-lf-6.12.3-1.0.0.tar.gz" BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx93" BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL32_OPTEE=y +BR2_TARGET_OPTEE_OS=y +BR2_TARGET_OPTEE_OS_CUSTOM_TARBALL=y +BR2_TARGET_OPTEE_OS_CUSTOM_TARBALL_LOCATION="$(call github,nxp-imx,imx-optee-os,lf-6.12.3-1.0.0)/imx-optee-os-lf-6.12.3-1.0.0.tar.gz" +BR2_TARGET_OPTEE_OS_NEEDS_PYTHON_CRYPTOGRAPHY=y +BR2_TARGET_OPTEE_OS_PLATFORM="imx" +BR2_TARGET_OPTEE_OS_PLATFORM_FLAVOR="mx93evk" BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_TARBALL=y diff --git a/configs/freescale_imx93frdm_defconfig b/configs/freescale_imx93frdm_defconfig index 8e16762d8fa..788af67e376 100644 --- a/configs/freescale_imx93frdm_defconfig +++ b/configs/freescale_imx93frdm_defconfig @@ -1,14 +1,16 @@ BR2_aarch64=y BR2_cortex_a55=y BR2_ARM_FPU_VFPV4D16=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_GLIBC_STABLE=y BR2_GLOBAL_PATCH_DIR="board/freescale/imx93frdm/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_GETTY_PORT="ttyLP0" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/imx9-bootloader-prepare.sh board/freescale/common/imx/post-image.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,jolivain,linux-imx,lf-6.6.36-2.1.0-imx93frdm)/linux-imx-lf-6.6.36-2.1.0-imx93frdm.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,nxp-imx,linux-imx,lf-6.18.37-2.1.0)/linux-imx-lf-6.18.37-2.1.0.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="imx_v8" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/imx93-11x11-frdm" @@ -22,14 +24,15 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_ROOTFS_EXT2_SIZE="120M" BR2_TARGET_ARM_TRUSTED_FIRMWARE=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL=y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,nxp-imx,imx-atf,lf-6.6.36-2.1.0)/imx-atf-lf-6.6.36-2.1.0.tar.gz" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,nxp-imx,imx-atf,lf-6.18.37-2.1.0)/imx-atf-lf-6.18.37-2.1.0.tar.gz" BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx93" BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_TARBALL=y -BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,jolivain,uboot-imx,lf-6.6.36-2.1.0-imx93frdm)/uboot-imx-lf-6.6.36-2.1.0-imx93frdm.tar.gz" +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,nxp-imx,uboot-imx,lf-6.18.37-2.1.0)/uboot-imx-lf-6.18.37-2.1.0.tar.gz" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx93_11x11_frdm" +BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/freescale/imx93frdm/uboot.fragment" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_TARGET_UBOOT_NEEDS_GNUTLS=y diff --git a/configs/friendlyarm_nanopi_neo_defconfig b/configs/friendlyarm_nanopi_neo_defconfig index 9aed25b30cc..07be41cbf13 100644 --- a/configs/friendlyarm_nanopi_neo_defconfig +++ b/configs/friendlyarm_nanopi_neo_defconfig @@ -1,7 +1,9 @@ BR2_arm=y BR2_cortex_a7=y BR2_ARM_FPU_VFPV4=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV7_EABIHF_GLIBC_STABLE=y BR2_GLOBAL_PATCH_DIR="board/friendlyarm/nanopi-neo/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_HOSTNAME="nanopi-neo" @@ -11,7 +13,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-neo/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.44" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.18" BR2_LINUX_KERNEL_DEFCONFIG="sunxi" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun8i-h3-nanopi-neo" @@ -21,11 +23,12 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.07" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.01" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi_neo" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_NEEDS_GNUTLS=y BR2_TARGET_UBOOT_FORMAT_CUSTOM=y BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-sunxi-with-spl.bin" BR2_PACKAGE_HOST_GENIMAGE=y diff --git a/configs/friendlyarm_nanopi_r2s_defconfig b/configs/friendlyarm_nanopi_r2s_defconfig index 547d9d5f59f..62502377078 100644 --- a/configs/friendlyarm_nanopi_r2s_defconfig +++ b/configs/friendlyarm_nanopi_r2s_defconfig @@ -1,6 +1,10 @@ BR2_aarch64=y BR2_ARM_FPU_VFPV4=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_GLIBC_STABLE=y +BR2_GLOBAL_PATCH_DIR="board/friendlyarm/nanopi-r2s/patches" +BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_HOSTNAME="rk3328-nanopi-r2s" BR2_TARGET_GENERIC_ISSUE="Welcome to Nanopi R2S RK3328" BR2_ROOTFS_POST_BUILD_SCRIPT="board/friendlyarm/nanopi-r2s/post-build.sh" @@ -8,7 +12,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-r2s/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.13" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.18" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3328-nanopi-r2s" @@ -16,7 +20,7 @@ BR2_LINUX_KERNEL_INSTALL_TARGET=y BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_EXT2_4=y -BR2_TARGET_ROOTFS_EXT2_SIZE="120M" +BR2_TARGET_ROOTFS_EXT2_SIZE="256M" BR2_TARGET_ARM_TRUSTED_FIRMWARE=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.12" @@ -26,7 +30,7 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.10" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.01" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi-r2s-rk3328" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y diff --git a/configs/friendlyarm_nanopi_r3s_defconfig b/configs/friendlyarm_nanopi_r3s_defconfig index beeab11c5eb..971a0ae851e 100644 --- a/configs/friendlyarm_nanopi_r3s_defconfig +++ b/configs/friendlyarm_nanopi_r3s_defconfig @@ -13,7 +13,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c $(BINARIES_DIR)/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.14.6" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.8" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/friendlyarm/nanopi-r3s/kernel.config" BR2_LINUX_KERNEL_DTS_SUPPORT=y @@ -35,7 +35,7 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES="bl31/bl31.elf" BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2025.04" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.01" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi-r3s-rk3566" BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y BR2_TARGET_UBOOT_NEEDS_PYELFTOOLS=y diff --git a/configs/hp_9000_defconfig b/configs/hp_9000_defconfig new file mode 100644 index 00000000000..29ad684d74f --- /dev/null +++ b/configs/hp_9000_defconfig @@ -0,0 +1,20 @@ +BR2_hppa=y +BR2_parisc11=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_16=y +BR2_GLOBAL_PATCH_DIR="board/hp/9000/patches" +BR2_DOWNLOAD_FORCE_CHECK_HASHES=y +BR2_SYSTEM_DHCP="eth0" +BR2_ROOTFS_POST_IMAGE_SCRIPT=" board/hp/9000/post-image.sh support/scripts/genimage.sh $(BINARIES_DIR)/palo.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c $(BINARIES_DIR)/genimage.cfg" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.16.5" +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y +BR2_TARGET_ROOTFS_CPIO=y +BR2_TARGET_ROOTFS_CPIO_GZIP=y +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +# BR2_TARGET_ROOTFS_TAR is not set +BR2_TARGET_PALO=y +BR2_PACKAGE_HOST_GENIMAGE=y diff --git a/configs/imx6ullevk_defconfig b/configs/imx6ullevk_defconfig index 38ea8f69408..5d802e6614e 100644 --- a/configs/imx6ullevk_defconfig +++ b/configs/imx6ullevk_defconfig @@ -1,13 +1,15 @@ BR2_arm=y BR2_cortex_a7=y BR2_ARM_FPU_NEON_VFPV4=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y +BR2_GLOBAL_PATCH_DIR="board/freescale/imx6ull-evk/patches" +BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.4" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.8" BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="nxp/imx/imx6ull-14x14-evk" @@ -20,9 +22,10 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BOARDNAME="mx6ull_14x14_evk" BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2023.10" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.01" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_NEEDS_GNUTLS=y BR2_TARGET_UBOOT_FORMAT_DTB_IMX=y BR2_PACKAGE_HOST_DOSFSTOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y diff --git a/configs/imx6ulz_bsh_smm_m2_defconfig b/configs/imx6ulz_bsh_smm_m2_defconfig index 5aa41b6438c..9b817e9d026 100644 --- a/configs/imx6ulz_bsh_smm_m2_defconfig +++ b/configs/imx6ulz_bsh_smm_m2_defconfig @@ -9,7 +9,7 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3" BR2_ROOTFS_POST_BUILD_SCRIPT="board/bsh/imx6ulz-bsh-smm-m2/post-build.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.36" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.112" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/bsh/imx6ulz-bsh-smm-m2/linux.config" BR2_LINUX_KERNEL_DTS_SUPPORT=y @@ -28,7 +28,7 @@ BR2_TARGET_ROOTFS_UBIFS_LEBSIZE=0x1f000 BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2025.07" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.10" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx6ulz_smm_m2" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y diff --git a/configs/imx8mn_bsh_smm_s2_defconfig b/configs/imx8mn_bsh_smm_s2_defconfig index 662aea69deb..3364ad15cfa 100644 --- a/configs/imx8mn_bsh_smm_s2_defconfig +++ b/configs/imx8mn_bsh_smm_s2_defconfig @@ -6,7 +6,7 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3" BR2_ROOTFS_POST_BUILD_SCRIPT="board/bsh/imx8mn-bsh-smm-s2/post-build.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.39" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.112" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/bsh/common/imx8mn-bsh-smm-s2/linux.fragment" BR2_LINUX_KERNEL_DTS_SUPPORT=y @@ -28,7 +28,7 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_DEBUG=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2025.07" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.10" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx8mn_bsh_smm_s2" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y diff --git a/configs/imx8mn_bsh_smm_s2_pro_defconfig b/configs/imx8mn_bsh_smm_s2_pro_defconfig index f1e9d0c0a15..17f834130de 100644 --- a/configs/imx8mn_bsh_smm_s2_pro_defconfig +++ b/configs/imx8mn_bsh_smm_s2_pro_defconfig @@ -7,7 +7,7 @@ BR2_ROOTFS_POST_BUILD_SCRIPT="board/bsh/imx8mn-bsh-smm-s2-pro/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/bsh/imx8mn-bsh-smm-s2-pro/post-image.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.39" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.112" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/bsh/common/imx8mn-bsh-smm-s2/linux.fragment" BR2_LINUX_KERNEL_DTS_SUPPORT=y @@ -29,7 +29,7 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="IMX_BOOT_UART_BASE=0x30a60 BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2025.07" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.10" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx8mn_bsh_smm_s2pro" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y diff --git a/configs/imx93-evk_defconfig b/configs/imx93-evk_defconfig index f3af2b51830..cf03bbe3c76 100644 --- a/configs/imx93-evk_defconfig +++ b/configs/imx93-evk_defconfig @@ -1,7 +1,9 @@ BR2_aarch64=y BR2_cortex_a55=y BR2_ARM_FPU_VFPV4D16=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_GLIBC_STABLE=y BR2_GLOBAL_PATCH_DIR="board/freescale/imx93-evk/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y @@ -22,7 +24,6 @@ BR2_PACKAGE_FREESCALE_IMX=y BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX93=y BR2_PACKAGE_FIRMWARE_ELE_IMX=y BR2_PACKAGE_FIRMWARE_IMX=y -BR2_PACKAGE_FIRMWARE_IMX_LPDDR4=y BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_ROOTFS_EXT2_SIZE="256M" @@ -42,6 +43,7 @@ BR2_TARGET_UBOOT_NEEDS_GNUTLS=y BR2_TARGET_UBOOT_NEEDS_UTIL_LINUX=y BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y BR2_TARGET_UBOOT_NEEDS_IMX_FIRMWARE=y +BR2_TARGET_UBOOT_NEEDS_IMX_ELE_FIRMWARE=y BR2_TARGET_UBOOT_FORMAT_CUSTOM=y BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="flash.bin" BR2_TARGET_UBOOT_SPL=y diff --git a/configs/imx93frdm_defconfig b/configs/imx93frdm_defconfig new file mode 100644 index 00000000000..f5a5f973a03 --- /dev/null +++ b/configs/imx93frdm_defconfig @@ -0,0 +1,46 @@ +BR2_aarch64=y +BR2_cortex_a55=y +BR2_ARM_FPU_VFPV4D16=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_GLIBC_STABLE=y +BR2_GLOBAL_PATCH_DIR="board/freescale/imx93frdm/patches" +BR2_DOWNLOAD_FORCE_CHECK_HASHES=y +BR2_TARGET_GENERIC_GETTY_PORT="ttyLP0" +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="7.3" +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/imx93-11x11-frdm" +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y +BR2_PACKAGE_FREESCALE_IMX=y +BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX93=y +BR2_PACKAGE_FIRMWARE_ELE_IMX=y +BR2_PACKAGE_FIRMWARE_IMX=y +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="120M" +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.15.0" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx93" +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.10" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx93_frdm" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y +BR2_TARGET_UBOOT_NEEDS_IMX_FIRMWARE=y +BR2_TARGET_UBOOT_NEEDS_IMX_ELE_FIRMWARE=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="flash.bin" +BR2_TARGET_UBOOT_SPL=y +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y +BR2_PACKAGE_HOST_UBOOT_TOOLS=y diff --git a/configs/imxrt1050-evk_defconfig b/configs/imxrt1050-evk_defconfig index fce2b831f38..813be65e524 100644 --- a/configs/imxrt1050-evk_defconfig +++ b/configs/imxrt1050-evk_defconfig @@ -1,12 +1,16 @@ BR2_arm=y BR2_cortex_m7=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_7=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV7M_UCLIBC_STABLE=y +BR2_DOWNLOAD_FORCE_CHECK_HASHES=y +BR2_GLOBAL_PATCH_DIR="board/freescale/imxrt1050evk/patches" BR2_ROOTFS_OVERLAY="board/freescale/imxrt1050evk/rootfs_overlay" BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/freescale/imxrt1050evk/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.7" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.18" BR2_LINUX_KERNEL_DEFCONFIG="imxrt" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="nxp/imx/imxrt1050-evk" @@ -17,7 +21,7 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="16M" BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2025.07" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.01" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imxrt1050-evk" BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y diff --git a/configs/iot-gate-imx8_ebbr_defconfig b/configs/iot-gate-imx8_ebbr_defconfig new file mode 100644 index 00000000000..460494302a7 --- /dev/null +++ b/configs/iot-gate-imx8_ebbr_defconfig @@ -0,0 +1,62 @@ +BR2_aarch64=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_GLIBC_STABLE=y +BR2_GLOBAL_PATCH_DIR="board/compulab/iot-gate-imx8-ebbr/patches" +BR2_DOWNLOAD_FORCE_CHECK_HASHES=y +BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/compulab/iot-gate-imx8-ebbr/post-image.sh support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/compulab/iot-gate-imx8-ebbr/genimage.cfg" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.16.8" +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y +BR2_LINUX_KERNEL_NEEDS_HOST_PYTHON3=y +BR2_PACKAGE_FREESCALE_IMX=y +BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MM=y +BR2_PACKAGE_FIRMWARE_IMX=y +BR2_PACKAGE_OPTEE_CLIENT=y +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="128M" +# BR2_TARGET_ROOTFS_TAR is not set +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.13" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8mm" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL32_OPTEE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_TARGETS="bl2" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="BL32_BASE=0x7e000000 IMX_BOOT_UART_BASE=0x30880000 NEED_BL2=yes BL2_CFLAGS=-DIMX_FIP_MMAP" +BR2_TARGET_GRUB2=y +BR2_TARGET_GRUB2_BUILTIN_MODULES_EFI="boot efi_gop efifwsetup efinet efitextmode ext2 fat help linux lsefi lsefimmap lsefisystab normal part_gpt part_msdos reboot squash4" +BR2_TARGET_OPTEE_OS=y +BR2_TARGET_OPTEE_OS_CUSTOM_VERSION=y +BR2_TARGET_OPTEE_OS_CUSTOM_VERSION_VALUE="4.7.0" +BR2_TARGET_OPTEE_OS_NEEDS_DTC=y +BR2_TARGET_OPTEE_OS_NEEDS_PYTHON_CRYPTOGRAPHY=y +BR2_TARGET_OPTEE_OS_PLATFORM="imx" +BR2_TARGET_OPTEE_OS_PLATFORM_FLAVOR="mx8mm_cl_iot_gate" +BR2_TARGET_OPTEE_OS_ADDITIONAL_VARIABLES="CFG_TEE_CORE_LOG_LEVEL=2 CFG_TEE_TA_LOG_LEVEL=2 CFG_EXTERNAL_DTB_OVERLAY=y CFG_DT=y CFG_DT_ADDR=0x52000000" +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.01" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx8mm-cl-iot-gate-optee" +BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/compulab/iot-gate-imx8-ebbr/u-boot.fragment" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_NEEDS_GNUTLS=y +BR2_TARGET_UBOOT_NEEDS_UTIL_LINUX=y +BR2_TARGET_UBOOT_NEEDS_IMX_FIRMWARE=y +BR2_TARGET_UBOOT_USE_BINMAN=y +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="cmd_binman=:" +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y +BR2_PACKAGE_HOST_UBOOT_TOOLS=y +BR2_PACKAGE_HOST_UBOOT_TOOLS_FIT_SUPPORT=y diff --git a/configs/khadas_vim3_defconfig b/configs/khadas_vim3_defconfig index 21a16cc1b0b..32e39fc64b5 100644 --- a/configs/khadas_vim3_defconfig +++ b/configs/khadas_vim3_defconfig @@ -1,12 +1,16 @@ BR2_aarch64=y BR2_cortex_a73_a53=y BR2_ARM_FPU_VFPV4=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_3=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_GLIBC_STABLE=y +BR2_GLOBAL_PATCH_DIR="board/khadas/vim3/patches" +BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_ROOTFS_POST_BUILD_SCRIPT="board/khadas/vim3/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/khadas/vim3/post-image.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.3" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.15" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="amlogic/meson-g12b-a311d-khadas-vim3" @@ -14,13 +18,14 @@ BR2_LINUX_KERNEL_INSTALL_TARGET=y BR2_PACKAGE_DOSFSTOOLS=y BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_EXT2_4=y -BR2_TARGET_ROOTFS_EXT2_SIZE="128M" +BR2_TARGET_ROOTFS_EXT2_SIZE="256M" BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2023.04" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.01" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="khadas-vim3" BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_NEEDS_GNUTLS=y BR2_PACKAGE_HOST_AMLOGIC_BOOT_FIP=y BR2_PACKAGE_HOST_DOSFSTOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y diff --git a/configs/kontron_smarc_sal28_defconfig b/configs/kontron_smarc_sal28_defconfig index efd4bd41e6c..b1e175b7b2d 100644 --- a/configs/kontron_smarc_sal28_defconfig +++ b/configs/kontron_smarc_sal28_defconfig @@ -1,6 +1,10 @@ BR2_aarch64=y BR2_cortex_a72=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_16=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_GLIBC_STABLE=y +BR2_GLOBAL_PATCH_DIR="board/kontron/smarc-sal28/patches" +BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y BR2_ROOTFS_OVERLAY="board/kontron/smarc-sal28/rootfs_overlay" BR2_ROOTFS_POST_BUILD_SCRIPT="board/kontron/smarc-sal28/post-build.sh" @@ -8,7 +12,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c $(BINARIES_DIR)/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.16" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/fsl-ls1028a-kontron-sl28 freescale/fsl-ls1028a-kontron-sl28-var2 freescale/fsl-ls1028a-kontron-sl28-var3-ads2 freescale/fsl-ls1028a-kontron-sl28-var4 freescale/fsl-ls1028a-kontron-kbox-a-230-ls" @@ -18,11 +22,11 @@ BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y BR2_PACKAGE_RCW_SMARC_SAL28=y BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_EXT2_4=y -BR2_TARGET_ROOTFS_EXT2_SIZE="128M" +BR2_TARGET_ROOTFS_EXT2_SIZE="160M" BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.10" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.04" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="kontron_sl28" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y diff --git a/configs/lafrite_defconfig b/configs/lafrite_defconfig index 5f70706fa03..f23fd0ca99b 100644 --- a/configs/lafrite_defconfig +++ b/configs/lafrite_defconfig @@ -1,5 +1,7 @@ BR2_aarch64=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_GLIBC_STABLE=y BR2_GLOBAL_PATCH_DIR="board/librecomputer/lafrite/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y @@ -9,7 +11,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/librecomputer/lafrite/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.22" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.56" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="amlogic/meson-gxl-s805x-libretech-ac" @@ -17,6 +19,6 @@ BR2_LINUX_KERNEL_INSTALL_TARGET=y BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_EXT2_4=y -BR2_TARGET_ROOTFS_EXT2_SIZE="120M" +BR2_TARGET_ROOTFS_EXT2_SIZE="150M" # BR2_TARGET_ROOTFS_TAR is not set BR2_PACKAGE_HOST_GENIMAGE=y diff --git a/configs/ls1028ardb_defconfig b/configs/ls1028ardb_defconfig index aaba73faa88..ec3828e74af 100644 --- a/configs/ls1028ardb_defconfig +++ b/configs/ls1028ardb_defconfig @@ -1,6 +1,6 @@ BR2_aarch64=y BR2_cortex_a72=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y BR2_GLOBAL_PATCH_DIR="board/freescale/ls1028ardb/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_HOSTNAME="ls1028a" @@ -12,7 +12,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/freescale/ls1028ardb/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,linux,lf-6.12.3-1.0.0)/linux-lf-6.12.3-1.0.0.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,linux,lf-6.18.20-2.0.0)/linux-lf-6.18.20-2.0.0.tar.gz" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(LINUX_DIR)/arch/arm64/configs/lsdk.config" BR2_LINUX_KERNEL_DTS_SUPPORT=y @@ -22,11 +22,11 @@ BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y BR2_PACKAGE_QORIQ_CADENCE_DP_FIRMWARE=y BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_EXT2_4=y -BR2_TARGET_ROOTFS_EXT2_SIZE="128M" +BR2_TARGET_ROOTFS_EXT2_SIZE="200M" # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ARM_TRUSTED_FIRMWARE=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL=y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,atf,lf-6.12.3-1.0.0)/atf-lf-6.12.3-1.0.0.tar.gz" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,atf,lf-6.18.20-2.0.0)/atf-lf-6.18.20-2.0.0.tar.gz" BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="ls1028ardb" BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33=y @@ -36,9 +36,10 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES="fip.bin bl2_sd.pbl" BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_TARBALL=y -BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,u-boot,lf-6.12.3-1.0.0)/u-boot-lf-6.12.3-1.0.0.tar.gz" +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,u-boot,lf-6.18.20-2.0.0)/u-boot-lf-6.18.20-2.0.0.tar.gz" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="ls1028ardb_tfa" BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_GNUTLS=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_QORIQ_RCW=y BR2_PACKAGE_HOST_QORIQ_RCW_INTREE="ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.bin" diff --git a/configs/ls1043a-rdb_defconfig b/configs/ls1043a-rdb_defconfig index e5a8a00c871..e40fade23b6 100644 --- a/configs/ls1043a-rdb_defconfig +++ b/configs/ls1043a-rdb_defconfig @@ -1,5 +1,5 @@ BR2_aarch64=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y BR2_TOOLCHAIN_BUILDROOT_CXX=y BR2_GLOBAL_PATCH_DIR="board/freescale/ls1043a-rdb/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y @@ -12,7 +12,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/freescale/ls1043a-rdb/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,linux,lf-6.12.3-1.0.0)/linux-lf-6.12.3-1.0.0.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,linux,lf-6.18.20-2.0.0)/linux-lf-6.18.20-2.0.0.tar.gz" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(LINUX_DIR)/arch/arm64/configs/lsdk.config" BR2_LINUX_KERNEL_DTS_SUPPORT=y @@ -28,7 +28,7 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="200M" # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ARM_TRUSTED_FIRMWARE=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL=y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,atf,lf-6.12.3-1.0.0)/atf-lf-6.12.3-1.0.0.tar.gz" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,atf,lf-6.18.20-2.0.0)/atf-lf-6.18.20-2.0.0.tar.gz" BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="ls1043ardb" BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33=y @@ -38,9 +38,10 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES="fip.bin bl2_sd.pbl" BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_TARBALL=y -BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,u-boot,lf-6.12.3-1.0.0)/u-boot-lf-6.12.3-1.0.0.tar.gz" +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,u-boot,lf-6.18.20-2.0.0)/u-boot-lf-6.18.20-2.0.0.tar.gz" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="ls1043ardb_tfa" BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_GNUTLS=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_QORIQ_RCW=y BR2_PACKAGE_HOST_QORIQ_RCW_INTREE="ls1043ardb/RR_FQPP_1455/rcw_1600_sdboot.bin" diff --git a/configs/ls1046a-frwy_defconfig b/configs/ls1046a-frwy_defconfig index 0e6f1cd941b..346931bc2d5 100644 --- a/configs/ls1046a-frwy_defconfig +++ b/configs/ls1046a-frwy_defconfig @@ -1,6 +1,6 @@ BR2_aarch64=y BR2_cortex_a72=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y BR2_TOOLCHAIN_BUILDROOT_CXX=y BR2_GLOBAL_PATCH_DIR="board/freescale/ls1046a-frwy/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y @@ -13,7 +13,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/freescale/ls1046a-frwy/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,linux,lf-6.12.3-1.0.0)/linux-lf-6.12.3-1.0.0.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,linux,lf-6.18.20-2.0.0)/linux-lf-6.18.20-2.0.0.tar.gz" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(LINUX_DIR)/arch/arm64/configs/lsdk.config" BR2_LINUX_KERNEL_DTS_SUPPORT=y @@ -28,7 +28,7 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="200M" # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ARM_TRUSTED_FIRMWARE=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL=y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,atf,lf-6.12.3-1.0.0)/atf-lf-6.12.3-1.0.0.tar.gz" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,atf,lf-6.18.20-2.0.0)/atf-lf-6.18.20-2.0.0.tar.gz" BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="ls1046afrwy" BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33=y @@ -38,9 +38,10 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES="fip.bin bl2_sd.pbl" BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_TARBALL=y -BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,u-boot,lf-6.12.3-1.0.0)/u-boot-lf-6.12.3-1.0.0.tar.gz" +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,u-boot,lf-6.18.20-2.0.0)/u-boot-lf-6.18.20-2.0.0.tar.gz" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="ls1046afrwy_tfa" BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_GNUTLS=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_QORIQ_RCW=y BR2_PACKAGE_HOST_QORIQ_RCW_INTREE="ls1046afrwy/NN_NNQNNPNP_3040_0506/rcw_1600_sdboot.bin" diff --git a/configs/ls1046a-rdb_defconfig b/configs/ls1046a-rdb_defconfig index dfa7536617a..b604f1f33a7 100644 --- a/configs/ls1046a-rdb_defconfig +++ b/configs/ls1046a-rdb_defconfig @@ -1,6 +1,6 @@ BR2_aarch64=y BR2_cortex_a72=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y BR2_TOOLCHAIN_BUILDROOT_CXX=y BR2_GLOBAL_PATCH_DIR="board/freescale/ls1046a-rdb/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y @@ -13,7 +13,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/freescale/ls1046a-rdb/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,linux,lf-6.12.3-1.0.0)/linux-lf-6.12.3-1.0.0.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,linux,lf-6.18.20-2.0.0)/linux-lf-6.18.20-2.0.0.tar.gz" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(LINUX_DIR)/arch/arm64/configs/lsdk.config" BR2_LINUX_KERNEL_DTS_SUPPORT=y @@ -28,7 +28,7 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="200M" # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ARM_TRUSTED_FIRMWARE=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL=y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,atf,lf-6.12.3-1.0.0)/atf-lf-6.12.3-1.0.0.tar.gz" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,atf,lf-6.18.20-2.0.0)/atf-lf-6.18.20-2.0.0.tar.gz" BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="ls1046ardb" BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33=y @@ -38,9 +38,10 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES="fip.bin bl2_sd.pbl" BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_TARBALL=y -BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,u-boot,lf-6.12.3-1.0.0)/u-boot-lf-6.12.3-1.0.0.tar.gz" +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,nxp-qoriq,u-boot,lf-6.18.20-2.0.0)/u-boot-lf-6.18.20-2.0.0.tar.gz" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="ls1046ardb_tfa" BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_GNUTLS=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_QORIQ_RCW=y BR2_PACKAGE_HOST_QORIQ_RCW_INTREE="ls1046ardb/RR_FFSSPPPH_1133_5559/rcw_1800_sdboot.rcw" diff --git a/configs/mangopi_mq1rdw2_defconfig b/configs/mangopi_mq1rdw2_defconfig index 2249fa4be5e..469a45b967e 100644 --- a/configs/mangopi_mq1rdw2_defconfig +++ b/configs/mangopi_mq1rdw2_defconfig @@ -1,7 +1,9 @@ BR2_arm=y BR2_cortex_a7=y BR2_ARM_FPU_VFPV4=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y +BR2_GLOBAL_PATCH_DIR="board/mangopi/mq1rdw2/patches" +BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_HOSTNAME="mangopi-mq1rdw2" BR2_TARGET_GENERIC_ISSUE="Welcome to MangoPI MQ1RDW2" BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y @@ -12,7 +14,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/mangopi/mq1rdw2/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.5" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.8" BR2_LINUX_KERNEL_DEFCONFIG="sunxi" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun8i-t113s-mangopi-mq-r-t113" @@ -31,11 +33,12 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.01-rc4" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.01" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="mangopi_mq_r" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_NEEDS_GNUTLS=y BR2_TARGET_UBOOT_SPL=y BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin" BR2_PACKAGE_HOST_GENIMAGE=y diff --git a/configs/microchip_mpfs_icicle_defconfig b/configs/microchip_mpfs_icicle_defconfig index 4337ac34b47..1d8937c3d11 100644 --- a/configs/microchip_mpfs_icicle_defconfig +++ b/configs/microchip_mpfs_icicle_defconfig @@ -1,23 +1,23 @@ BR2_riscv=y BR2_RISCV_ISA_RVC=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y BR2_GLOBAL_PATCH_DIR="board/microchip/mpfs_icicle/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_HOSTNAME="mpfs_icicle" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/microchip/mpfs_icicle/post-image.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,linux4microchip,linux,linux4microchip+fpga-2024.06)/linux-linux4microchip+fpga-2024.06.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,linux4microchip,linux,linux4microchip+fpga-2025.10)/linux-linux4microchip+fpga-2025.10.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="mpfs" BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/microchip/mpfs_icicle/linux.fragment" BR2_LINUX_KERNEL_DTS_SUPPORT=y -BR2_LINUX_KERNEL_INTREE_DTS_NAME="microchip/mpfs-icicle-kit" +BR2_LINUX_KERNEL_INTREE_DTS_NAME="microchip/mpfs-icicle-kit microchip/mpfs-icicle-kit-prod" BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_TARBALL=y -BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,linux4microchip,u-boot-mchp,linux4microchip+fpga-2024.06)/uboot-linux4microchip+fpga-2024.06.tar.gz" +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,linux4microchip,u-boot-mchp,linux4microchip+fpga-2025.10)/uboot-linux4microchip+fpga-2025.10.tar.gz" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="microchip_mpfs_icicle" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/microchip/mpfs_icicle/uboot-fragment-rootfs.config" BR2_TARGET_UBOOT_NEEDS_DTC=y diff --git a/configs/nitrogen6sx_defconfig b/configs/nitrogen6sx_defconfig index 03103567e9e..368cd027f41 100644 --- a/configs/nitrogen6sx_defconfig +++ b/configs/nitrogen6sx_defconfig @@ -3,7 +3,9 @@ BR2_cortex_a9=y BR2_ARM_ENABLE_NEON=y BR2_ARM_ENABLE_VFP=y BR2_ARM_FPU_VFPV3=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV7_EABIHF_GLIBC_STABLE=y BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0" BR2_ROOTFS_POST_BUILD_SCRIPT="board/boundarydevices/common/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/boundarydevices/common/post-image.sh" @@ -20,7 +22,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_TARBALL=y -BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot/archive/7e7eff74.tar.gz" +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot/archive/ea37a18c.tar.gz" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nitrogen6sx" BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_TARGET_UBOOT_FORMAT_IMX=y diff --git a/configs/nitrogen6x_defconfig b/configs/nitrogen6x_defconfig index 4d5408a474a..f99392a82b5 100644 --- a/configs/nitrogen6x_defconfig +++ b/configs/nitrogen6x_defconfig @@ -3,7 +3,9 @@ BR2_cortex_a9=y BR2_ARM_ENABLE_NEON=y BR2_ARM_ENABLE_VFP=y BR2_ARM_FPU_VFPV3=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV7_EABIHF_GLIBC_STABLE=y BR2_TARGET_GENERIC_GETTY_PORT="ttymxc1" BR2_ROOTFS_POST_BUILD_SCRIPT="board/boundarydevices/common/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/boundarydevices/common/post-image.sh" @@ -20,7 +22,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_TARBALL=y -BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot/archive/7e7eff74.tar.gz" +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot/archive/ea37a18c.tar.gz" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nitrogen6q" BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_TARGET_UBOOT_FORMAT_IMX=y diff --git a/configs/nitrogen7_defconfig b/configs/nitrogen7_defconfig index 65aff368606..2c558f73115 100644 --- a/configs/nitrogen7_defconfig +++ b/configs/nitrogen7_defconfig @@ -1,7 +1,9 @@ BR2_arm=y BR2_cortex_a7=y BR2_ARM_FPU_NEON_VFPV4=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV7_EABIHF_GLIBC_STABLE=y BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0" BR2_ROOTFS_POST_BUILD_SCRIPT="board/boundarydevices/common/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/boundarydevices/common/post-image.sh" @@ -19,7 +21,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_TARBALL=y -BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot/archive/7e7eff74.tar.gz" +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot/archive/ea37a18c.tar.gz" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nitrogen7" BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_TARGET_UBOOT_FORMAT_IMX=y diff --git a/configs/nitrogen8m_defconfig b/configs/nitrogen8m_defconfig index 9a90cdae54d..92d50051baa 100644 --- a/configs/nitrogen8m_defconfig +++ b/configs/nitrogen8m_defconfig @@ -1,5 +1,7 @@ BR2_aarch64=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_GLIBC_STABLE=y BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0" BR2_ROOTFS_POST_BUILD_SCRIPT="board/freescale/common/imx/imx8-bootloader-prepare.sh board/boundarydevices/common/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/boundarydevices/common/post-image.sh" @@ -26,7 +28,7 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_TARBALL=y -BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot/archive/7e7eff74.tar.gz" +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot/archive/ea37a18c.tar.gz" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nitrogen8m" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y diff --git a/configs/nitrogen8mm_defconfig b/configs/nitrogen8mm_defconfig index db4af070a82..91cdcd7a961 100644 --- a/configs/nitrogen8mm_defconfig +++ b/configs/nitrogen8mm_defconfig @@ -1,5 +1,7 @@ BR2_aarch64=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_GLIBC_STABLE=y BR2_TARGET_GENERIC_GETTY_PORT="ttymxc1" BR2_ROOTFS_POST_BUILD_SCRIPT="board/freescale/common/imx/imx8-bootloader-prepare.sh board/boundarydevices/common/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/boundarydevices/common/post-image.sh" @@ -26,7 +28,7 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_TARBALL=y -BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot/archive/7e7eff74.tar.gz" +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot/archive/ea37a18c.tar.gz" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nitrogen8mm_2g" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y diff --git a/configs/nitrogen8mn_defconfig b/configs/nitrogen8mn_defconfig index dc54d240089..746c9faf29b 100644 --- a/configs/nitrogen8mn_defconfig +++ b/configs/nitrogen8mn_defconfig @@ -1,5 +1,7 @@ BR2_aarch64=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_GLIBC_STABLE=y BR2_TARGET_GENERIC_GETTY_PORT="ttymxc1" BR2_ROOTFS_POST_BUILD_SCRIPT="board/freescale/common/imx/imx8-bootloader-prepare.sh board/boundarydevices/common/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/boundarydevices/common/post-image.sh" @@ -26,7 +28,7 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_TARBALL=y -BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot/archive/7e7eff74.tar.gz" +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot/archive/ea37a18c.tar.gz" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nitrogen8_nano_8mn1gr0" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y diff --git a/configs/nitrogen8mp_defconfig b/configs/nitrogen8mp_defconfig index 72884d97fd3..867ce7c4eb5 100644 --- a/configs/nitrogen8mp_defconfig +++ b/configs/nitrogen8mp_defconfig @@ -1,5 +1,7 @@ BR2_aarch64=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_GLIBC_STABLE=y BR2_TARGET_GENERIC_GETTY_PORT="ttymxc1" BR2_ROOTFS_POST_BUILD_SCRIPT="board/freescale/common/imx/imx8-bootloader-prepare.sh board/boundarydevices/common/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/boundarydevices/common/post-image.sh" @@ -26,7 +28,7 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_TARBALL=y -BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot/archive/7e7eff74.tar.gz" +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="https://github.com/boundarydevices/u-boot/archive/ea37a18c.tar.gz" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nitrogen8mp_2gr0" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y diff --git a/configs/olimex_a10_olinuxino_lime_defconfig b/configs/olimex_a10_olinuxino_lime_defconfig index 101796cc121..625491d69bd 100644 --- a/configs/olimex_a10_olinuxino_lime_defconfig +++ b/configs/olimex_a10_olinuxino_lime_defconfig @@ -1,18 +1,20 @@ BR2_arm=y BR2_cortex_a8=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y +BR2_GLOBAL_PATCH_DIR="board/olimex/a10_olinuxino/patches" +BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_HOSTNAME="a10-olinuxino" BR2_TARGET_GENERIC_ISSUE="Welcome to OLinuXino!" BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" -BR2_ROOTFS_POST_BUILD_SCRIPT="board/olimex/a10_olinuxino/post-build.sh" +BR2_ROOTFS_OVERLAY="board/olimex/a10_olinuxino/rootfs_overlay" BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/olimex/a10_olinuxino/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.1.9" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.8" BR2_LINUX_KERNEL_DEFCONFIG="sunxi" BR2_LINUX_KERNEL_DTS_SUPPORT=y -BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun4i-a10-olinuxino-lime" +BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun4i-a10-olinuxino-lime" BR2_LINUX_KERNEL_INSTALL_TARGET=y BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_EXT2_4=y @@ -20,14 +22,12 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2023.01" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.01" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="A10-OLinuXino-Lime" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_NEEDS_GNUTLS=y BR2_TARGET_UBOOT_SPL=y BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin" BR2_PACKAGE_HOST_GENIMAGE=y -BR2_PACKAGE_HOST_UBOOT_TOOLS=y -BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y -BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/olimex/a10_olinuxino/boot.cmd" diff --git a/configs/olimex_a13_olinuxino_defconfig b/configs/olimex_a13_olinuxino_defconfig index 219fe19ba06..9ec20779ceb 100644 --- a/configs/olimex_a13_olinuxino_defconfig +++ b/configs/olimex_a13_olinuxino_defconfig @@ -1,32 +1,34 @@ BR2_arm=y BR2_cortex_a8=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y +BR2_GLOBAL_PATCH_DIR="board/olimex/a13_olinuxino/patches" +BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_HOSTNAME="a13-olinuxino" BR2_TARGET_GENERIC_ISSUE="Welcome to OLinuXino!" BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" -BR2_ROOTFS_POST_BUILD_SCRIPT="board/olimex/a13_olinuxino/post-build.sh" +BR2_ROOTFS_OVERLAY="board/olimex/a13_olinuxino/rootfs_overlay" BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/olimex/a13_olinuxino/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.1.9" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.8" BR2_LINUX_KERNEL_DEFCONFIG="sunxi" BR2_LINUX_KERNEL_DTS_SUPPORT=y -BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun5i-a13-olinuxino" +BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun5i-a13-olinuxino" BR2_LINUX_KERNEL_INSTALL_TARGET=y BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2023.01" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.01" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="A13-OLinuXino" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_NEEDS_GNUTLS=y BR2_TARGET_UBOOT_SPL=y BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin" BR2_PACKAGE_HOST_DOSFSTOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_MTOOLS=y -BR2_PACKAGE_HOST_UBOOT_TOOLS=y diff --git a/configs/olimex_a20_olinuxino_lime2_defconfig b/configs/olimex_a20_olinuxino_lime2_defconfig index 3e86696b4be..4e8686615bc 100644 --- a/configs/olimex_a20_olinuxino_lime2_defconfig +++ b/configs/olimex_a20_olinuxino_lime2_defconfig @@ -9,12 +9,12 @@ BR2_TARGET_GENERIC_HOSTNAME="a20-olinuxino" BR2_TARGET_GENERIC_ISSUE="Welcome to OLinuXino!" BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" BR2_SYSTEM_DHCP="eth0" -BR2_ROOTFS_OVERLAY="board/olimex/a20_olinuxino/rootfs_overlay" +BR2_ROOTFS_OVERLAY="board/olimex/a20_olinuxino/rootfs_overlay_mali" BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/olimex/a20_olinuxino/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.36" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.8" BR2_LINUX_KERNEL_DEFCONFIG="sunxi" BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/olimex/a20_olinuxino/linux-disable-lima.fragment" BR2_LINUX_KERNEL_DTS_SUPPORT=y @@ -28,7 +28,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2025.07" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.01" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="A20-OLinuXino-Lime2" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y diff --git a/configs/olimex_a20_olinuxino_lime_defconfig b/configs/olimex_a20_olinuxino_lime_defconfig index 524dc08008c..7edbdcf3694 100644 --- a/configs/olimex_a20_olinuxino_lime_defconfig +++ b/configs/olimex_a20_olinuxino_lime_defconfig @@ -9,12 +9,12 @@ BR2_TARGET_GENERIC_HOSTNAME="a20-olinuxino" BR2_TARGET_GENERIC_ISSUE="Welcome to OLinuXino!" BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" BR2_SYSTEM_DHCP="eth0" -BR2_ROOTFS_OVERLAY="board/olimex/a20_olinuxino/rootfs_overlay" +BR2_ROOTFS_OVERLAY="board/olimex/a20_olinuxino/rootfs_overlay_mali" BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/olimex/a20_olinuxino/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.36" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.8" BR2_LINUX_KERNEL_DEFCONFIG="sunxi" BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/olimex/a20_olinuxino/linux-disable-lima.fragment" BR2_LINUX_KERNEL_DTS_SUPPORT=y @@ -28,7 +28,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2025.07" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.01" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="A20-OLinuXino-Lime" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y diff --git a/configs/olimex_a20_olinuxino_micro_defconfig b/configs/olimex_a20_olinuxino_micro_defconfig index a1d23952d7b..cf1c23ef35d 100644 --- a/configs/olimex_a20_olinuxino_micro_defconfig +++ b/configs/olimex_a20_olinuxino_micro_defconfig @@ -1,20 +1,22 @@ BR2_arm=y BR2_cortex_a7=y BR2_ARM_FPU_NEON_VFPV4=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y +BR2_GLOBAL_PATCH_DIR="board/olimex/a20_olinuxino/patches" +BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_HOSTNAME="a20-olinuxino" BR2_TARGET_GENERIC_ISSUE="Welcome to OLinuXino!" BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" BR2_SYSTEM_DHCP="eth0" -BR2_ROOTFS_POST_BUILD_SCRIPT="board/olimex/a20_olinuxino/post-build.sh" +BR2_ROOTFS_OVERLAY="board/olimex/a20_olinuxino/rootfs_overlay" BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/olimex/a20_olinuxino/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.1.9" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.8" BR2_LINUX_KERNEL_DEFCONFIG="sunxi" BR2_LINUX_KERNEL_DTS_SUPPORT=y -BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun7i-a20-olinuxino-micro" +BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun7i-a20-olinuxino-micro" BR2_LINUX_KERNEL_INSTALL_TARGET=y BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_EXT2_4=y @@ -22,14 +24,12 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2023.01" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.01" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="A20-OLinuXino_MICRO" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_NEEDS_GNUTLS=y BR2_TARGET_UBOOT_SPL=y BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin" BR2_PACKAGE_HOST_GENIMAGE=y -BR2_PACKAGE_HOST_UBOOT_TOOLS=y -BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y -BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/olimex/a20_olinuxino/boot.cmd" diff --git a/configs/olimex_a33_olinuxino_defconfig b/configs/olimex_a33_olinuxino_defconfig index 8c053ef3d6f..3606d49a41e 100644 --- a/configs/olimex_a33_olinuxino_defconfig +++ b/configs/olimex_a33_olinuxino_defconfig @@ -1,34 +1,34 @@ BR2_arm=y BR2_cortex_a7=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y +BR2_GLOBAL_PATCH_DIR="board/olimex/a33_olinuxino/patches" +BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_HOSTNAME="A33-olinuxino" BR2_TARGET_GENERIC_ISSUE="Welcome to A33 OLinuXino!" BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" -BR2_ROOTFS_POST_BUILD_SCRIPT="board/olimex/a33_olinuxino/post-build.sh" +BR2_ROOTFS_OVERLAY="board/olimex/a33_olinuxino/rootfs_overlay" BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/olimex/a33_olinuxino/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.1.9" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.8" BR2_LINUX_KERNEL_DEFCONFIG="sunxi" BR2_LINUX_KERNEL_DTS_SUPPORT=y -BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun8i-a33-olinuxino" +BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun8i-a33-olinuxino" BR2_LINUX_KERNEL_INSTALL_TARGET=y BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2023.01" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.01" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="A33-OLinuXino" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_NEEDS_GNUTLS=y BR2_TARGET_UBOOT_SPL=y BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin" BR2_PACKAGE_HOST_DOSFSTOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_MTOOLS=y -BR2_PACKAGE_HOST_UBOOT_TOOLS=y -BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y -BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/olimex/a33_olinuxino/boot.cmd" diff --git a/configs/olimex_a64_olinuxino_defconfig b/configs/olimex_a64_olinuxino_defconfig index ad446ea18c8..6173fc8c202 100644 --- a/configs/olimex_a64_olinuxino_defconfig +++ b/configs/olimex_a64_olinuxino_defconfig @@ -1,12 +1,15 @@ BR2_aarch64=y BR2_ARM_FPU_VFPV4=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y +BR2_GLOBAL_PATCH_DIR="board/olimex/a64-olinuxino/patches" +BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_ISSUE="Welcome to Olimex A64-OLinuXino" +BR2_ROOTFS_OVERLAY="board/olimex/a64-olinuxino/rootfs_overlay" BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/olimex/a64-olinuxino/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.1.9" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.8" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-a64-olinuxino" @@ -16,16 +19,17 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_ROOTFS_EXT2_SIZE="120M" BR2_TARGET_ARM_TRUSTED_FIRMWARE=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.8" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.14.0" BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50i_a64" BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2023.01" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.01" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="a64-olinuxino" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_NEEDS_GNUTLS=y BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y BR2_TARGET_UBOOT_FORMAT_CUSTOM=y BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-sunxi-with-spl.bin" @@ -33,6 +37,3 @@ BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="SCP=/dev/null" BR2_PACKAGE_HOST_DOSFSTOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y BR2_PACKAGE_HOST_MTOOLS=y -BR2_PACKAGE_HOST_UBOOT_TOOLS=y -BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y -BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/olimex/a64-olinuxino/boot.cmd" diff --git a/configs/openblocks_a6_defconfig b/configs/openblocks_a6_defconfig index 754ec539378..e0ce4aa3fba 100644 --- a/configs/openblocks_a6_defconfig +++ b/configs/openblocks_a6_defconfig @@ -8,6 +8,7 @@ BR2_SYSTEM_DHCP="eth0" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.14.336" +BR2_LINUX_KERNEL_LICENSE_FILES="COPYING" BR2_LINUX_KERNEL_DEFCONFIG="mvebu_v5" BR2_LINUX_KERNEL_APPENDED_UIMAGE=y BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x8000" diff --git a/configs/orangepi_pc2_defconfig b/configs/orangepi_pc2_defconfig index 46d04b34c84..180c744baed 100644 --- a/configs/orangepi_pc2_defconfig +++ b/configs/orangepi_pc2_defconfig @@ -25,11 +25,12 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50i_a64" BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2023.04" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.04" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="orangepi_pc2" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_NEEDS_GNUTLS=y BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y BR2_TARGET_UBOOT_SPL=y BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin" diff --git a/configs/orangepi_zero2w_defconfig b/configs/orangepi_zero2w_defconfig index c2030b05c20..b5702e48f01 100644 --- a/configs/orangepi_zero2w_defconfig +++ b/configs/orangepi_zero2w_defconfig @@ -4,6 +4,7 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y BR2_GLOBAL_PATCH_DIR="board/orangepi/orangepi-zero2w/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_ISSUE="Welcome to Orangepi Zero2W" +BR2_TARGET_GENERIC_HOSTNAME="orangepi-zero2w" BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y BR2_ROOTFS_POST_BUILD_SCRIPT="board/orangepi/common/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" diff --git a/configs/orangepi_zero3_defconfig b/configs/orangepi_zero3_defconfig index c6aa9c991a6..53c542ab1ea 100644 --- a/configs/orangepi_zero3_defconfig +++ b/configs/orangepi_zero3_defconfig @@ -4,6 +4,7 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y BR2_GLOBAL_PATCH_DIR="board/orangepi/orangepi-zero3/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_ISSUE="Welcome to Orangepi Zero3" +BR2_TARGET_GENERIC_HOSTNAME="orangepi-zero3" BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y BR2_SYSTEM_DHCP="eth0" BR2_ROOTFS_POST_BUILD_SCRIPT="board/orangepi/common/post-build.sh" diff --git a/configs/pc_x86_64_bios_defconfig b/configs/pc_x86_64_bios_defconfig index 3617d3a85f4..3b3e4cc5610 100644 --- a/configs/pc_x86_64_bios_defconfig +++ b/configs/pc_x86_64_bios_defconfig @@ -1,5 +1,7 @@ BR2_x86_64=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_GLOBAL_PATCH_DIR="board/pc/patches" +BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y BR2_TARGET_GENERIC_GETTY_PORT="tty1" BR2_ROOTFS_POST_BUILD_SCRIPT="board/pc/post-build.sh" @@ -7,7 +9,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/pc/genimage-bios.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.1.24" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.47" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/pc/linux.config" BR2_LINUX_KERNEL_INSTALL_TARGET=y diff --git a/configs/pc_x86_64_efi_defconfig b/configs/pc_x86_64_efi_defconfig index 45d895889ba..a126eb8338b 100644 --- a/configs/pc_x86_64_efi_defconfig +++ b/configs/pc_x86_64_efi_defconfig @@ -1,12 +1,14 @@ BR2_x86_64=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_GLOBAL_PATCH_DIR="board/pc/patches" +BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y BR2_TARGET_GENERIC_GETTY_PORT="tty1" BR2_ROOTFS_POST_BUILD_SCRIPT="board/pc/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/pc/post-image-efi.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.1.24" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.47" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/pc/linux.config" BR2_LINUX_KERNEL_INSTALL_TARGET=y diff --git a/configs/pine64_defconfig b/configs/pine64_defconfig index 8975f3b1a21..9a77452a517 100644 --- a/configs/pine64_defconfig +++ b/configs/pine64_defconfig @@ -1,12 +1,16 @@ BR2_aarch64=y BR2_ARM_FPU_VFPV4=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_GLIBC_STABLE=y +BR2_GLOBAL_PATCH_DIR="board/pine64/pine64/patches" +BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_ISSUE="Welcome to PINE64" BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/pine64/pine64/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.48" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.32" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-a64-pine64" @@ -16,16 +20,17 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_ROOTFS_EXT2_SIZE="120M" BR2_TARGET_ARM_TRUSTED_FIRMWARE=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="lts-v2.10.5" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="lts-v2.12.1" BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50i_a64" BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.07" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.04" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="pine64_plus" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_NEEDS_GNUTLS=y BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y BR2_TARGET_UBOOT_SPL=y BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin" diff --git a/configs/pine64_pinecube_defconfig b/configs/pine64_pinecube_defconfig index 3f88ca08222..2a0c567d762 100644 --- a/configs/pine64_pinecube_defconfig +++ b/configs/pine64_pinecube_defconfig @@ -1,7 +1,11 @@ BR2_arm=y BR2_cortex_a7=y BR2_ARM_FPU_VFPV4=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV7_EABIHF_GLIBC_STABLE=y +BR2_GLOBAL_PATCH_DIR="board/pine64/pinecube/patches" +BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_HOSTNAME="pinecube" BR2_TARGET_GENERIC_ISSUE="Welcome to Pine64 Pinecube" BR2_SYSTEM_DHCP="eth0" @@ -10,21 +14,22 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/pine64/pinecube/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.1.60" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.33" BR2_LINUX_KERNEL_DEFCONFIG="sunxi" BR2_LINUX_KERNEL_DTS_SUPPORT=y -BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun8i-s3-pinecube" +BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun8i-s3-pinecube" BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2023.10" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.04" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="pinecube" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_NEEDS_GNUTLS=y BR2_TARGET_UBOOT_SPL=y BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin" BR2_PACKAGE_HOST_DOSFSTOOLS=y diff --git a/configs/pine64_star64_defconfig b/configs/pine64_star64_defconfig index 33c5826a4a3..a0356447d51 100644 --- a/configs/pine64_star64_defconfig +++ b/configs/pine64_star64_defconfig @@ -1,13 +1,14 @@ BR2_riscv=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_15=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_GLOBAL_PATCH_DIR="board/pine64/star64/patches" +BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_ROOTFS_OVERLAY="board/pine64/star64/overlay/" -BR2_ROOTFS_POST_BUILD_SCRIPT="board/pine64/star64/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/pine64/star64/genimage.cfg" BR2_LINUX_KERNEL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Fishwaldo,Star64_linux,1456c984f15e21e28fb8a9ce96d0ca10e61a71c4)/linux-1456c984f15e21e28fb8a9ce96d0ca10e61a71c4.tar.gz" -BR2_LINUX_KERNEL_DEFCONFIG="pine64_star64" +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.57" +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="starfive/jh7110-pine64-star64" BR2_LINUX_KERNEL_INSTALL_TARGET=y @@ -17,15 +18,18 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_ROOTFS_EXT2_SIZE="100M" BR2_TARGET_OPENSBI=y BR2_TARGET_OPENSBI_PLAT="generic" -BR2_TARGET_OPENSBI_UBOOT_PAYLOAD=y +# BR2_TARGET_OPENSBI_INSTALL_JUMP_IMG is not set BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y -BR2_TARGET_UBOOT_CUSTOM_TARBALL=y -BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Fishwaldo,u-boot,172b47f62039605d6806fa96bd403c21cda28996)/u-boot-172b47f62039605d6806fa96bd403c21cda28996.tar.gz" -BR2_TARGET_UBOOT_BOARD_DEFCONFIG="pine64_star64" +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2025.10" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="starfive_visionfive2" BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_NEEDS_GNUTLS=y +BR2_TARGET_UBOOT_NEEDS_OPENSBI=y +BR2_TARGET_UBOOT_USE_BINMAN=y +# BR2_TARGET_UBOOT_FORMAT_BIN is not set +BR2_TARGET_UBOOT_FORMAT_ITB=y BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="spl/u-boot-spl.bin.normal.out" BR2_PACKAGE_HOST_GENIMAGE=y -BR2_PACKAGE_HOST_STARFIVE_SPLTOOL=y -BR2_PACKAGE_HOST_UBOOT_TOOLS=y -BR2_PACKAGE_HOST_UBOOT_TOOLS_FIT_SUPPORT=y diff --git a/configs/qemu_aarch64_ebbr_defconfig b/configs/qemu_aarch64_ebbr_defconfig index 80e7c101ee5..8d20813044c 100644 --- a/configs/qemu_aarch64_ebbr_defconfig +++ b/configs/qemu_aarch64_ebbr_defconfig @@ -1,14 +1,17 @@ BR2_aarch64=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_GLIBC_STABLE=y BR2_GLOBAL_PATCH_DIR="board/qemu/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh board/qemu/aarch64-ebbr/post-image.sh support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG) -c board/qemu/aarch64-ebbr/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.27" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y +BR2_LINUX_KERNEL_NEEDS_HOST_PYTHON3=y BR2_PACKAGE_OPTEE_CLIENT=y BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_EXT2_4=y diff --git a/configs/qemu_aarch64_sbsa_defconfig b/configs/qemu_aarch64_sbsa_defconfig index 49511f87af9..56c160c85af 100644 --- a/configs/qemu_aarch64_sbsa_defconfig +++ b/configs/qemu_aarch64_sbsa_defconfig @@ -1,6 +1,8 @@ BR2_aarch64=y -BR2_neoverse_n1=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_neoverse_n2=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_GLIBC_STABLE=y BR2_GLOBAL_PATCH_DIR="board/qemu/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0" @@ -9,9 +11,10 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh board/qemu/aarch64-sbsa/a BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG) -c board/qemu/aarch64-sbsa/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.27" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y +BR2_LINUX_KERNEL_NEEDS_HOST_PYTHON3=y BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_ROOTFS_EXT2_SIZE="128M" diff --git a/configs/qemu_aarch64_virt_defconfig b/configs/qemu_aarch64_virt_defconfig index 78b2a620479..19c8b86ae61 100644 --- a/configs/qemu_aarch64_virt_defconfig +++ b/configs/qemu_aarch64_virt_defconfig @@ -1,5 +1,5 @@ BR2_aarch64=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y BR2_GLOBAL_PATCH_DIR="board/qemu/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_SYSTEM_DHCP="eth0" @@ -7,7 +7,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.27" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/aarch64-virt/linux.config" BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y diff --git a/configs/qemu_arm_ebbr_defconfig b/configs/qemu_arm_ebbr_defconfig index dc1b917ef1a..eae560590e6 100644 --- a/configs/qemu_arm_ebbr_defconfig +++ b/configs/qemu_arm_ebbr_defconfig @@ -1,16 +1,19 @@ BR2_arm=y BR2_cortex_a15=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV7_EABIHF_GLIBC_STABLE=y BR2_GLOBAL_PATCH_DIR="board/qemu/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh board/qemu/arm-ebbr/post-image.sh support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG) -c board/qemu/arm-ebbr/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.27" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/qemu/arm-ebbr/linux.fragment" BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y +BR2_LINUX_KERNEL_NEEDS_HOST_PYTHON3=y BR2_PACKAGE_OPTEE_CLIENT=y BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_EXT2_4=y diff --git a/configs/qemu_arm_versatile_defconfig b/configs/qemu_arm_versatile_defconfig index 998c337ca95..7677e5fd055 100644 --- a/configs/qemu_arm_versatile_defconfig +++ b/configs/qemu_arm_versatile_defconfig @@ -1,5 +1,5 @@ BR2_arm=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y BR2_GLOBAL_PATCH_DIR="board/qemu/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0" @@ -8,7 +8,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.27" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" BR2_LINUX_KERNEL_DEFCONFIG="versatile" BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/qemu/arm-versatile/linux.fragment" BR2_LINUX_KERNEL_DTS_SUPPORT=y diff --git a/configs/qemu_arm_vexpress_defconfig b/configs/qemu_arm_vexpress_defconfig index 63bfdc41def..6dc116c1e74 100644 --- a/configs/qemu_arm_vexpress_defconfig +++ b/configs/qemu_arm_vexpress_defconfig @@ -2,7 +2,7 @@ BR2_arm=y BR2_cortex_a9=y BR2_ARM_ENABLE_NEON=y BR2_ARM_ENABLE_VFP=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y BR2_GLOBAL_PATCH_DIR="board/qemu/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0" @@ -11,7 +11,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.27" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" BR2_LINUX_KERNEL_DEFCONFIG="vexpress" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="arm/vexpress-v2p-ca9" diff --git a/configs/qemu_arm_vexpress_tz_defconfig b/configs/qemu_arm_vexpress_tz_defconfig index e5de1a45b0c..84dca264da4 100644 --- a/configs/qemu_arm_vexpress_tz_defconfig +++ b/configs/qemu_arm_vexpress_tz_defconfig @@ -1,8 +1,9 @@ BR2_arm=y BR2_cortex_a15=y BR2_ARM_FPU_VFPV3D16=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y -BR2_TOOLCHAIN_BUILDROOT_CXX=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV7_EABIHF_GLIBC_STABLE=y BR2_GLOBAL_PATCH_DIR="board/qemu/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0" @@ -11,7 +12,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.27" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" BR2_LINUX_KERNEL_DEFCONFIG="vexpress" BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/qemu/arm-vexpress-tz/linux.fragment" BR2_PACKAGE_OPENSSL=y @@ -22,8 +23,7 @@ BR2_TARGET_ROOTFS_CPIO_GZIP=y BR2_TARGET_ROOTFS_CPIO_UIMAGE=y # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ARM_TRUSTED_FIRMWARE=y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.7" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_LATEST_LTS_2_12_VERSION=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="qemu" BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL32_OPTEE=y @@ -35,8 +35,9 @@ BR2_TARGET_OPTEE_OS_PLATFORM="vexpress-qemu_virt" BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.04" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.04" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="qemu_arm" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/qemu/arm-vexpress-tz/u-boot.config" +BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_PACKAGE_HOST_QEMU=y BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE=y diff --git a/configs/qemu_hppa_b160l_defconfig b/configs/qemu_hppa_b160l_defconfig new file mode 100644 index 00000000000..7e3e561e3f0 --- /dev/null +++ b/configs/qemu_hppa_b160l_defconfig @@ -0,0 +1,18 @@ +BR2_hppa=y +BR2_parisc11=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y +BR2_GLOBAL_PATCH_DIR="board/qemu/patches" +BR2_DOWNLOAD_FORCE_CHECK_HASHES=y +BR2_SYSTEM_DHCP="eth0" +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +# BR2_TARGET_ROOTFS_TAR is not set +BR2_PACKAGE_HOST_QEMU=y +BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE=y diff --git a/configs/qemu_loongarch64_virt_efi_defconfig b/configs/qemu_loongarch64_virt_efi_defconfig index 945cb9232da..0c1d0468924 100644 --- a/configs/qemu_loongarch64_virt_efi_defconfig +++ b/configs/qemu_loongarch64_virt_efi_defconfig @@ -1,5 +1,5 @@ BR2_loongarch64=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y BR2_GLOBAL_PATCH_DIR="board/qemu/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y @@ -8,10 +8,11 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/loongarch64-virt-efi/post-image.sh boar BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG) -c board/qemu/loongarch64-virt-efi/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.27" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y BR2_LINUX_KERNEL_NEEDS_HOST_LIBELF=y +BR2_PACKAGE_ZSTD=y BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_EXT2_SIZE="200M" # BR2_TARGET_ROOTFS_TAR is not set @@ -20,6 +21,7 @@ BR2_TARGET_GRUB2=y BR2_TARGET_GRUB2_LOONGARCH64_EFI=y BR2_PACKAGE_HOST_DOSFSTOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_KMOD_ZSTD=y BR2_PACKAGE_HOST_MTOOLS=y BR2_PACKAGE_HOST_QEMU=y BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE=y diff --git a/configs/qemu_m68k_mcf5208_defconfig b/configs/qemu_m68k_mcf5208_defconfig index f50809809c0..ac3df225792 100644 --- a/configs/qemu_m68k_mcf5208_defconfig +++ b/configs/qemu_m68k_mcf5208_defconfig @@ -1,6 +1,6 @@ BR2_m68k=y BR2_m68k_cf5208=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y BR2_GLOBAL_PATCH_DIR="board/qemu/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" @@ -9,7 +9,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.27" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-mcf5208/linux.config" BR2_TARGET_ROOTFS_INITRAMFS=y diff --git a/configs/qemu_m68k_q800_defconfig b/configs/qemu_m68k_q800_defconfig index 9cb7b61f13a..87b96299212 100644 --- a/configs/qemu_m68k_q800_defconfig +++ b/configs/qemu_m68k_q800_defconfig @@ -1,5 +1,5 @@ BR2_m68k=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y BR2_GLOBAL_PATCH_DIR="board/qemu/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" @@ -8,7 +8,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.27" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-q800/linux.config" BR2_TARGET_ROOTFS_EXT2=y diff --git a/configs/qemu_microblazebe_mmu_defconfig b/configs/qemu_microblazebe_mmu_defconfig index 9d67d719200..cc6871e212e 100644 --- a/configs/qemu_microblazebe_mmu_defconfig +++ b/configs/qemu_microblazebe_mmu_defconfig @@ -1,5 +1,5 @@ BR2_microblazebe=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y BR2_GLOBAL_PATCH_DIR="board/qemu/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0" @@ -8,7 +8,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.27" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux.config" BR2_LINUX_KERNEL_LINUX_BIN=y diff --git a/configs/qemu_microblazeel_mmu_defconfig b/configs/qemu_microblazeel_mmu_defconfig index 46befedd57a..8945a775d04 100644 --- a/configs/qemu_microblazeel_mmu_defconfig +++ b/configs/qemu_microblazeel_mmu_defconfig @@ -1,5 +1,5 @@ BR2_microblazeel=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y BR2_GLOBAL_PATCH_DIR="board/qemu/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0" @@ -8,7 +8,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.27" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux.config" BR2_LINUX_KERNEL_LINUX_BIN=y diff --git a/configs/qemu_mips32r2_malta_defconfig b/configs/qemu_mips32r2_malta_defconfig index 4ec4322dbba..832d9f2242b 100644 --- a/configs/qemu_mips32r2_malta_defconfig +++ b/configs/qemu_mips32r2_malta_defconfig @@ -1,6 +1,6 @@ BR2_mips=y BR2_mips_32r2=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y BR2_GLOBAL_PATCH_DIR="board/qemu/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" @@ -9,7 +9,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.27" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r2-malta/linux.config" BR2_LINUX_KERNEL_VMLINUX=y diff --git a/configs/qemu_mips32r2el_malta_defconfig b/configs/qemu_mips32r2el_malta_defconfig index 2901a5ff031..b714a7fc6c8 100644 --- a/configs/qemu_mips32r2el_malta_defconfig +++ b/configs/qemu_mips32r2el_malta_defconfig @@ -1,6 +1,6 @@ BR2_mipsel=y BR2_mips_32r2=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y BR2_GLOBAL_PATCH_DIR="board/qemu/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" @@ -9,7 +9,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.27" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r2el-malta/linux.config" BR2_LINUX_KERNEL_VMLINUX=y diff --git a/configs/qemu_mips32r6_malta_defconfig b/configs/qemu_mips32r6_malta_defconfig index bdbaa4030d4..9cebeeaf45a 100644 --- a/configs/qemu_mips32r6_malta_defconfig +++ b/configs/qemu_mips32r6_malta_defconfig @@ -1,6 +1,6 @@ BR2_mips=y BR2_mips_32r6=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y BR2_GLOBAL_PATCH_DIR="board/qemu/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" @@ -9,7 +9,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.27" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r6-malta/linux.config" BR2_LINUX_KERNEL_VMLINUX=y diff --git a/configs/qemu_mips32r6el_malta_defconfig b/configs/qemu_mips32r6el_malta_defconfig index 5ec51d34a5b..d54ab1f15e5 100644 --- a/configs/qemu_mips32r6el_malta_defconfig +++ b/configs/qemu_mips32r6el_malta_defconfig @@ -1,6 +1,6 @@ BR2_mipsel=y BR2_mips_32r6=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y BR2_GLOBAL_PATCH_DIR="board/qemu/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" @@ -9,7 +9,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.27" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r6el-malta/linux.config" BR2_LINUX_KERNEL_VMLINUX=y diff --git a/configs/qemu_mips64_malta_defconfig b/configs/qemu_mips64_malta_defconfig index a9c48afcd36..62dba0e369a 100644 --- a/configs/qemu_mips64_malta_defconfig +++ b/configs/qemu_mips64_malta_defconfig @@ -1,6 +1,6 @@ BR2_mips64=y BR2_MIPS_NABI64=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y BR2_GLOBAL_PATCH_DIR="board/qemu/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" @@ -9,7 +9,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.27" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux.config" BR2_LINUX_KERNEL_VMLINUX=y diff --git a/configs/qemu_mips64el_malta_defconfig b/configs/qemu_mips64el_malta_defconfig index 61edea24fae..0714a8e70c3 100644 --- a/configs/qemu_mips64el_malta_defconfig +++ b/configs/qemu_mips64el_malta_defconfig @@ -1,6 +1,6 @@ BR2_mips64el=y BR2_MIPS_NABI64=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y BR2_GLOBAL_PATCH_DIR="board/qemu/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" @@ -9,7 +9,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.27" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64el-malta/linux.config" BR2_LINUX_KERNEL_VMLINUX=y diff --git a/configs/qemu_mips64r6_malta_defconfig b/configs/qemu_mips64r6_malta_defconfig index 342140c9578..c7eac226ea3 100644 --- a/configs/qemu_mips64r6_malta_defconfig +++ b/configs/qemu_mips64r6_malta_defconfig @@ -1,7 +1,7 @@ BR2_mips64=y BR2_mips_64r6=y BR2_MIPS_NABI64=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y BR2_GLOBAL_PATCH_DIR="board/qemu/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" @@ -10,7 +10,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.27" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64r6-malta/linux.config" BR2_LINUX_KERNEL_VMLINUX=y diff --git a/configs/qemu_mips64r6el_malta_defconfig b/configs/qemu_mips64r6el_malta_defconfig index e0dd72b981a..606bb61a399 100644 --- a/configs/qemu_mips64r6el_malta_defconfig +++ b/configs/qemu_mips64r6el_malta_defconfig @@ -1,7 +1,7 @@ BR2_mips64el=y BR2_mips_64r6=y BR2_MIPS_NABI64=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y BR2_GLOBAL_PATCH_DIR="board/qemu/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" @@ -10,7 +10,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.27" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64r6el-malta/linux.config" BR2_LINUX_KERNEL_VMLINUX=y diff --git a/configs/qemu_or1k_defconfig b/configs/qemu_or1k_defconfig index 42dc6ce9692..19abf1efb7c 100644 --- a/configs/qemu_or1k_defconfig +++ b/configs/qemu_or1k_defconfig @@ -1,5 +1,5 @@ BR2_or1k=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y BR2_GLOBAL_PATCH_DIR="board/qemu/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_SYSTEM_DHCP="eth0" @@ -7,7 +7,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.27" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/or1k/linux.config" BR2_TARGET_ROOTFS_INITRAMFS=y diff --git a/configs/qemu_ppc64_e5500_defconfig b/configs/qemu_ppc64_e5500_defconfig index 9237cdc2e57..3d37656bf53 100644 --- a/configs/qemu_ppc64_e5500_defconfig +++ b/configs/qemu_ppc64_e5500_defconfig @@ -1,6 +1,6 @@ BR2_powerpc64=y BR2_powerpc_e5500=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y BR2_GLOBAL_PATCH_DIR="board/qemu/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" @@ -9,7 +9,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.27" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" BR2_LINUX_KERNEL_DEFCONFIG="corenet64_smp" BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/qemu/ppc64-e5500/linux.fragment" BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y diff --git a/configs/qemu_ppc64_pseries_defconfig b/configs/qemu_ppc64_pseries_defconfig index eb6f2fe14ee..a46cedbb1f7 100644 --- a/configs/qemu_ppc64_pseries_defconfig +++ b/configs/qemu_ppc64_pseries_defconfig @@ -1,6 +1,6 @@ BR2_powerpc64=y BR2_powerpc_power7=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y BR2_GLOBAL_PATCH_DIR="board/qemu/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_GETTY_PORT="hvc0" @@ -9,7 +9,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.27" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" BR2_LINUX_KERNEL_DEFCONFIG="pseries" BR2_LINUX_KERNEL_VMLINUX=y BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y diff --git a/configs/qemu_ppc64le_powernv10_defconfig b/configs/qemu_ppc64le_powernv10_defconfig new file mode 100644 index 00000000000..41765c2f170 --- /dev/null +++ b/configs/qemu_ppc64le_powernv10_defconfig @@ -0,0 +1,19 @@ +BR2_powerpc64le=y +BR2_powerpc_power10=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y +BR2_GLOBAL_PATCH_DIR="board/qemu/patches" +BR2_DOWNLOAD_FORCE_CHECK_HASHES=y +BR2_TARGET_GENERIC_GETTY_PORT="hvc0" +BR2_SYSTEM_DHCP="eth0" +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" +BR2_LINUX_KERNEL_DEFCONFIG="powernv" +BR2_LINUX_KERNEL_VMLINUX=y +BR2_LINUX_KERNEL_NEEDS_HOST_LIBELF=y +BR2_TARGET_ROOTFS_EXT2=y +# BR2_TARGET_ROOTFS_TAR is not set +BR2_PACKAGE_HOST_QEMU=y +BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE=y diff --git a/configs/qemu_ppc64le_powernv11_defconfig b/configs/qemu_ppc64le_powernv11_defconfig new file mode 100644 index 00000000000..94266a22d58 --- /dev/null +++ b/configs/qemu_ppc64le_powernv11_defconfig @@ -0,0 +1,19 @@ +BR2_powerpc64le=y +BR2_powerpc_power11=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y +BR2_GLOBAL_PATCH_DIR="board/qemu/patches" +BR2_DOWNLOAD_FORCE_CHECK_HASHES=y +BR2_TARGET_GENERIC_GETTY_PORT="hvc0" +BR2_SYSTEM_DHCP="eth0" +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" +BR2_LINUX_KERNEL_DEFCONFIG="powernv" +BR2_LINUX_KERNEL_VMLINUX=y +BR2_LINUX_KERNEL_NEEDS_HOST_LIBELF=y +BR2_TARGET_ROOTFS_EXT2=y +# BR2_TARGET_ROOTFS_TAR is not set +BR2_PACKAGE_HOST_QEMU=y +BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE=y diff --git a/configs/qemu_ppc64le_powernv8_defconfig b/configs/qemu_ppc64le_powernv8_defconfig index d9586884e39..5f1d7b78d9f 100644 --- a/configs/qemu_ppc64le_powernv8_defconfig +++ b/configs/qemu_ppc64le_powernv8_defconfig @@ -1,5 +1,5 @@ BR2_powerpc64le=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y BR2_GLOBAL_PATCH_DIR="board/qemu/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_GETTY_PORT="hvc0" @@ -8,7 +8,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.27" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" BR2_LINUX_KERNEL_DEFCONFIG="powernv" BR2_LINUX_KERNEL_VMLINUX=y BR2_LINUX_KERNEL_NEEDS_HOST_LIBELF=y diff --git a/configs/qemu_ppc64le_pseries_defconfig b/configs/qemu_ppc64le_pseries_defconfig index b7bc8e5d945..4596d436826 100644 --- a/configs/qemu_ppc64le_pseries_defconfig +++ b/configs/qemu_ppc64le_pseries_defconfig @@ -1,5 +1,5 @@ BR2_powerpc64le=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y BR2_GLOBAL_PATCH_DIR="board/qemu/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_GETTY_PORT="hvc0" @@ -8,7 +8,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.27" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" BR2_LINUX_KERNEL_DEFCONFIG="pseries_le" BR2_LINUX_KERNEL_VMLINUX=y BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y diff --git a/configs/qemu_ppc_bamboo_defconfig b/configs/qemu_ppc_bamboo_defconfig index d851e4e4f9f..6e12047f852 100644 --- a/configs/qemu_ppc_bamboo_defconfig +++ b/configs/qemu_ppc_bamboo_defconfig @@ -1,6 +1,6 @@ BR2_powerpc=y BR2_powerpc_440fp=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y BR2_GLOBAL_PATCH_DIR="board/qemu/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" @@ -9,10 +9,11 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.27" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" BR2_LINUX_KERNEL_DEFCONFIG="44x/bamboo" BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/qemu/ppc-bamboo/linux.fragment" BR2_LINUX_KERNEL_VMLINUX=y +BR2_LINUX_KERNEL_NEEDS_HOST_LIBELF=y BR2_TARGET_ROOTFS_INITRAMFS=y # BR2_TARGET_ROOTFS_TAR is not set BR2_PACKAGE_HOST_QEMU=y diff --git a/configs/qemu_ppc_e500mc_defconfig b/configs/qemu_ppc_e500mc_defconfig index 4728501ac9c..6ac6e1c135d 100644 --- a/configs/qemu_ppc_e500mc_defconfig +++ b/configs/qemu_ppc_e500mc_defconfig @@ -1,6 +1,6 @@ BR2_powerpc=y BR2_powerpc_e500mc=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y BR2_GLOBAL_PATCH_DIR="board/qemu/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" @@ -9,10 +9,11 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.27" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" BR2_LINUX_KERNEL_DEFCONFIG="corenet32_smp" BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/qemu/ppc-e500mc/linux.fragment" BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y +BR2_LINUX_KERNEL_NEEDS_HOST_LIBELF=y BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set BR2_PACKAGE_HOST_QEMU=y diff --git a/configs/qemu_ppc_g3beige_defconfig b/configs/qemu_ppc_g3beige_defconfig index 5d3fefc3749..a8e9c379bad 100644 --- a/configs/qemu_ppc_g3beige_defconfig +++ b/configs/qemu_ppc_g3beige_defconfig @@ -1,6 +1,6 @@ BR2_powerpc=y BR2_powerpc_750=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y BR2_GLOBAL_PATCH_DIR="board/qemu/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" @@ -9,10 +9,11 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.27" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-g3beige/linux.config" BR2_LINUX_KERNEL_VMLINUX=y +BR2_LINUX_KERNEL_NEEDS_HOST_LIBELF=y BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set BR2_PACKAGE_HOST_QEMU=y diff --git a/configs/qemu_ppc_mac99_defconfig b/configs/qemu_ppc_mac99_defconfig index a28a58d2686..55d201bdb9b 100644 --- a/configs/qemu_ppc_mac99_defconfig +++ b/configs/qemu_ppc_mac99_defconfig @@ -1,6 +1,6 @@ BR2_powerpc=y BR2_powerpc_7400=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y BR2_GLOBAL_PATCH_DIR="board/qemu/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" @@ -9,11 +9,12 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.27" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" BR2_LINUX_KERNEL_DEFCONFIG="pmac32" BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/qemu/ppc-mac99/linux.fragment" BR2_LINUX_KERNEL_VMLINUX=y BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y +BR2_LINUX_KERNEL_NEEDS_HOST_LIBELF=y BR2_TARGET_ROOTFS_CPIO=y BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set diff --git a/configs/qemu_ppc_mpc8544ds_defconfig b/configs/qemu_ppc_mpc8544ds_defconfig index ad453efb693..3e5a9a84fe5 100644 --- a/configs/qemu_ppc_mpc8544ds_defconfig +++ b/configs/qemu_ppc_mpc8544ds_defconfig @@ -1,6 +1,6 @@ BR2_powerpc=y BR2_powerpc_8548=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y BR2_GLOBAL_PATCH_DIR="board/qemu/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" @@ -9,10 +9,11 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.27" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-mpc8544ds/linux.config" BR2_LINUX_KERNEL_VMLINUX=y +BR2_LINUX_KERNEL_NEEDS_HOST_LIBELF=y BR2_TARGET_ROOTFS_INITRAMFS=y # BR2_TARGET_ROOTFS_TAR is not set BR2_PACKAGE_HOST_QEMU=y diff --git a/configs/qemu_riscv32_nommu_virt_defconfig b/configs/qemu_riscv32_nommu_virt_defconfig index dcf37c7b2d2..0f9ac77e41c 100644 --- a/configs/qemu_riscv32_nommu_virt_defconfig +++ b/configs/qemu_riscv32_nommu_virt_defconfig @@ -1,7 +1,7 @@ BR2_riscv=y BR2_RISCV_32=y # BR2_RISCV_USE_MMU is not set -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y BR2_GLOBAL_PATCH_DIR="board/qemu/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_SYSTEM_DHCP="eth0" @@ -9,7 +9,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.27" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/riscv32-virt/linux-nommu.config" BR2_TARGET_ROOTFS_EXT2=y diff --git a/configs/qemu_riscv32_virt_defconfig b/configs/qemu_riscv32_virt_defconfig index ac431413a42..a57c94910c0 100644 --- a/configs/qemu_riscv32_virt_defconfig +++ b/configs/qemu_riscv32_virt_defconfig @@ -1,6 +1,6 @@ BR2_riscv=y BR2_RISCV_32=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y BR2_GLOBAL_PATCH_DIR="board/qemu/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_SYSTEM_DHCP="eth0" @@ -8,7 +8,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.27" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" BR2_LINUX_KERNEL_DEFCONFIG="rv32" BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_OPENSBI=y diff --git a/configs/qemu_riscv64_nommu_virt_defconfig b/configs/qemu_riscv64_nommu_virt_defconfig index 9367010c27d..58d89eae5f6 100644 --- a/configs/qemu_riscv64_nommu_virt_defconfig +++ b/configs/qemu_riscv64_nommu_virt_defconfig @@ -1,6 +1,6 @@ BR2_riscv=y # BR2_RISCV_USE_MMU is not set -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y BR2_GLOBAL_PATCH_DIR="board/qemu/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_SYSTEM_DHCP="eth0" @@ -8,7 +8,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.27" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/riscv64-virt/linux-nommu.config" BR2_TARGET_ROOTFS_EXT2=y diff --git a/configs/qemu_riscv64_virt_defconfig b/configs/qemu_riscv64_virt_defconfig index fd093a61629..0d91971d1c5 100644 --- a/configs/qemu_riscv64_virt_defconfig +++ b/configs/qemu_riscv64_virt_defconfig @@ -1,5 +1,5 @@ BR2_riscv=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y BR2_GLOBAL_PATCH_DIR="board/qemu/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_SYSTEM_DHCP="eth0" @@ -7,7 +7,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.27" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_OPENSBI=y diff --git a/configs/qemu_riscv64_virt_efi_defconfig b/configs/qemu_riscv64_virt_efi_defconfig index 8b9b232853f..c279e159af8 100644 --- a/configs/qemu_riscv64_virt_efi_defconfig +++ b/configs/qemu_riscv64_virt_efi_defconfig @@ -1,5 +1,7 @@ BR2_riscv=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_RISCV64_LP64D_GLIBC_STABLE=y BR2_GLOBAL_PATCH_DIR="board/qemu/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_SYSTEM_DHCP="eth0" @@ -7,7 +9,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh board/qemu/riscv64-virt-e BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG) -c board/qemu/riscv64-virt-efi/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.27" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set diff --git a/configs/qemu_s390x_defconfig b/configs/qemu_s390x_defconfig index f9609075d60..5efc048c893 100644 --- a/configs/qemu_s390x_defconfig +++ b/configs/qemu_s390x_defconfig @@ -1,5 +1,5 @@ BR2_s390x=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y BR2_GLOBAL_PATCH_DIR="board/qemu/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y @@ -8,7 +8,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.27" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y BR2_TARGET_ROOTFS_EXT2=y diff --git a/configs/qemu_sh4_r2d_defconfig b/configs/qemu_sh4_r2d_defconfig index 628ca05543f..2311f7e06cf 100644 --- a/configs/qemu_sh4_r2d_defconfig +++ b/configs/qemu_sh4_r2d_defconfig @@ -1,5 +1,5 @@ BR2_sh=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y BR2_GLOBAL_PATCH_DIR="board/qemu/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_GETTY_PORT="ttySC1" @@ -8,7 +8,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.27" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4-r2d/linux.config" BR2_LINUX_KERNEL_ZIMAGE=y diff --git a/configs/qemu_sh4eb_r2d_defconfig b/configs/qemu_sh4eb_r2d_defconfig index 4fd07775ed1..083c25ddb8d 100644 --- a/configs/qemu_sh4eb_r2d_defconfig +++ b/configs/qemu_sh4eb_r2d_defconfig @@ -1,6 +1,6 @@ BR2_sh=y BR2_sh4eb=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y BR2_GLOBAL_PATCH_DIR="board/qemu/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_GETTY_PORT="ttySC1" @@ -8,7 +8,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.27" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4eb-r2d/linux.config" BR2_LINUX_KERNEL_ZIMAGE=y diff --git a/configs/qemu_sparc64_sun4u_defconfig b/configs/qemu_sparc64_sun4u_defconfig index 469575ff615..2a6d28aa42f 100644 --- a/configs/qemu_sparc64_sun4u_defconfig +++ b/configs/qemu_sparc64_sun4u_defconfig @@ -1,5 +1,5 @@ BR2_sparc64=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y BR2_GLOBAL_PATCH_DIR="board/qemu/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_SYSTEM_DHCP="eth0" @@ -7,7 +7,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.27" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc64-sun4u/linux.config" BR2_TARGET_ROOTFS_EXT2=y diff --git a/configs/qemu_sparc_ss10_defconfig b/configs/qemu_sparc_ss10_defconfig index e8650652d5c..fb039e55236 100644 --- a/configs/qemu_sparc_ss10_defconfig +++ b/configs/qemu_sparc_ss10_defconfig @@ -1,5 +1,5 @@ BR2_sparc=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y BR2_GLOBAL_PATCH_DIR="board/qemu/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_SYSTEM_DHCP="eth0" @@ -7,7 +7,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.27" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc-ss10/linux.config" BR2_TARGET_ROOTFS_EXT2=y diff --git a/configs/qemu_x86_64_defconfig b/configs/qemu_x86_64_defconfig index 18bd7f27346..ccaac0d0b92 100644 --- a/configs/qemu_x86_64_defconfig +++ b/configs/qemu_x86_64_defconfig @@ -1,5 +1,5 @@ BR2_x86_64=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y BR2_GLOBAL_PATCH_DIR="board/qemu/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_SYSTEM_DHCP="eth0" @@ -8,7 +8,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.27" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux.config" BR2_LINUX_KERNEL_NEEDS_HOST_LIBELF=y diff --git a/configs/qemu_x86_64_efi_defconfig b/configs/qemu_x86_64_efi_defconfig new file mode 100644 index 00000000000..60790857b5e --- /dev/null +++ b/configs/qemu_x86_64_efi_defconfig @@ -0,0 +1,27 @@ +BR2_x86_64=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_X86_64_GLIBC_STABLE=y +BR2_GLOBAL_PATCH_DIR="board/qemu/patches" +BR2_DOWNLOAD_FORCE_CHECK_HASHES=y +BR2_SYSTEM_DHCP="eth0" +BR2_ROOTFS_POST_BUILD_SCRIPT="board/qemu/x86_64-efi/post-build.sh" +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh board/qemu/x86_64-efi/post-image.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" +BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64-efi/linux.config" +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y +BR2_LINUX_KERNEL_NEEDS_HOST_LIBELF=y +BR2_TARGET_ROOTFS_EXT2=y +# BR2_TARGET_ROOTFS_TAR is not set +BR2_TARGET_EDK2=y +BR2_TARGET_GRUB2=y +BR2_TARGET_GRUB2_X86_64_EFI=y +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y +BR2_PACKAGE_HOST_QEMU=y +BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE=y diff --git a/configs/qemu_x86_defconfig b/configs/qemu_x86_defconfig index 70bc1730377..21e3d7657e9 100644 --- a/configs/qemu_x86_defconfig +++ b/configs/qemu_x86_defconfig @@ -1,5 +1,5 @@ BR2_x86_pentiumpro=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y BR2_GLOBAL_PATCH_DIR="board/qemu/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_SYSTEM_DHCP="eth0" @@ -8,7 +8,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.27" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux.config" BR2_TARGET_ROOTFS_EXT2=y diff --git a/configs/qemu_xtensa_lx60_defconfig b/configs/qemu_xtensa_lx60_defconfig index d731499e5e5..a84395a3442 100644 --- a/configs/qemu_xtensa_lx60_defconfig +++ b/configs/qemu_xtensa_lx60_defconfig @@ -1,8 +1,8 @@ BR2_xtensa=y BR2_XTENSA_CUSTOM=y BR2_XTENSA_OVERLAY_FILE="https://github.com/jcmvbkbc/xtensa-toolchain-build/raw/95291b7c39e6f790d0b2f062c945a630290f2c81/overlays/xtensa_dc233c.tar.gz" -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y -BR2_GLOBAL_PATCH_DIR="board/qemu/patches" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y +BR2_GLOBAL_PATCH_DIR="board/qemu/patches board/qemu/xtensa-lx60/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" BR2_SYSTEM_DHCP="eth0" @@ -10,7 +10,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.27" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux.config" BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y diff --git a/configs/qemu_xtensa_lx60_nommu_defconfig b/configs/qemu_xtensa_lx60_nommu_defconfig index e2979d21c70..a937112a9e5 100644 --- a/configs/qemu_xtensa_lx60_nommu_defconfig +++ b/configs/qemu_xtensa_lx60_nommu_defconfig @@ -2,8 +2,8 @@ BR2_xtensa=y BR2_XTENSA_CUSTOM=y BR2_XTENSA_OVERLAY_FILE="https://github.com/jcmvbkbc/xtensa-toolchain-build/raw/95291b7c39e6f790d0b2f062c945a630290f2c81/overlays/xtensa_dc233c.tar.gz" # BR2_XTENSA_USE_MMU is not set -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y -BR2_GLOBAL_PATCH_DIR="board/qemu/patches" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y +BR2_GLOBAL_PATCH_DIR="board/qemu/patches board/qemu/xtensa-lx60/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" BR2_SYSTEM_DHCP="eth0" @@ -11,7 +11,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/qemu/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.27" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.7" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-nommu.config" BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y diff --git a/configs/raspberrypi0_defconfig b/configs/raspberrypi0_defconfig index 1be48c32dce..9c000dc39d3 100644 --- a/configs/raspberrypi0_defconfig +++ b/configs/raspberrypi0_defconfig @@ -8,7 +8,7 @@ BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi0/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi0/post-image.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,ac69f097e1fba94502cbd36278db204120a37943)/linux-ac69f097e1fba94502cbd36278db204120a37943.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,21b410140c47ffab5668399f6f143c7d7b935c8b)/linux-21b410140c47ffab5668399f6f143c7d7b935c8b.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="broadcom/bcm2708-rpi-zero" diff --git a/configs/raspberrypi0w_defconfig b/configs/raspberrypi0w_defconfig index c7803c5af6f..a2392faf0be 100644 --- a/configs/raspberrypi0w_defconfig +++ b/configs/raspberrypi0w_defconfig @@ -8,7 +8,7 @@ BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi0w/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi0w/post-image.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,ac69f097e1fba94502cbd36278db204120a37943)/linux-ac69f097e1fba94502cbd36278db204120a37943.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,21b410140c47ffab5668399f6f143c7d7b935c8b)/linux-21b410140c47ffab5668399f6f143c7d7b935c8b.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="broadcom/bcm2708-rpi-zero-w" diff --git a/configs/raspberrypi2_64_defconfig b/configs/raspberrypi2_64_defconfig index 57f98c7396d..f8cadcb7311 100644 --- a/configs/raspberrypi2_64_defconfig +++ b/configs/raspberrypi2_64_defconfig @@ -10,7 +10,7 @@ BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi2-64/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi2-64/post-image.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,ac69f097e1fba94502cbd36278db204120a37943)/linux-ac69f097e1fba94502cbd36278db204120a37943.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,21b410140c47ffab5668399f6f143c7d7b935c8b)/linux-21b410140c47ffab5668399f6f143c7d7b935c8b.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="bcm2711" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="broadcom/bcm2710-rpi-2-b" diff --git a/configs/raspberrypi2_defconfig b/configs/raspberrypi2_defconfig index 60eb62b473f..5e3af7864b9 100644 --- a/configs/raspberrypi2_defconfig +++ b/configs/raspberrypi2_defconfig @@ -11,7 +11,7 @@ BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi2/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi2/post-image.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,ac69f097e1fba94502cbd36278db204120a37943)/linux-ac69f097e1fba94502cbd36278db204120a37943.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,21b410140c47ffab5668399f6f143c7d7b935c8b)/linux-21b410140c47ffab5668399f6f143c7d7b935c8b.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="bcm2709" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="broadcom/bcm2709-rpi-2-b broadcom/bcm2710-rpi-2-b" diff --git a/configs/raspberrypi3_64_defconfig b/configs/raspberrypi3_64_defconfig index 59b8b3fc6f5..31568129ac7 100644 --- a/configs/raspberrypi3_64_defconfig +++ b/configs/raspberrypi3_64_defconfig @@ -10,7 +10,7 @@ BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi3-64/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi3-64/post-image.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,ac69f097e1fba94502cbd36278db204120a37943)/linux-ac69f097e1fba94502cbd36278db204120a37943.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,21b410140c47ffab5668399f6f143c7d7b935c8b)/linux-21b410140c47ffab5668399f6f143c7d7b935c8b.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="bcm2711" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="broadcom/bcm2710-rpi-3-b broadcom/bcm2710-rpi-3-b-plus broadcom/bcm2710-rpi-cm3" diff --git a/configs/raspberrypi3_defconfig b/configs/raspberrypi3_defconfig index 3f7fdeb3abf..4cc73708e8e 100644 --- a/configs/raspberrypi3_defconfig +++ b/configs/raspberrypi3_defconfig @@ -11,7 +11,7 @@ BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi3/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi3/post-image.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,ac69f097e1fba94502cbd36278db204120a37943)/linux-ac69f097e1fba94502cbd36278db204120a37943.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,21b410140c47ffab5668399f6f143c7d7b935c8b)/linux-21b410140c47ffab5668399f6f143c7d7b935c8b.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="bcm2709" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="broadcom/bcm2710-rpi-3-b broadcom/bcm2710-rpi-3-b-plus broadcom/bcm2710-rpi-cm3" diff --git a/configs/raspberrypi3_qt5we_defconfig b/configs/raspberrypi3_qt5we_defconfig deleted file mode 100644 index 8cbb8b0d413..00000000000 --- a/configs/raspberrypi3_qt5we_defconfig +++ /dev/null @@ -1,43 +0,0 @@ -BR2_arm=y -BR2_cortex_a53=y -BR2_ARM_FPU_NEON_VFPV4=y -BR2_TOOLCHAIN_EXTERNAL=y -BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y -BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV7_EABIHF_GLIBC_STABLE=y -BR2_GLOBAL_PATCH_DIR="board/raspberrypi/patches" -BR2_DOWNLOAD_FORCE_CHECK_HASHES=y -BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y -BR2_SYSTEM_DHCP="eth0" -BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi3/post-build.sh" -BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi3/post-image.sh" -BR2_LINUX_KERNEL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,ac69f097e1fba94502cbd36278db204120a37943)/linux-ac69f097e1fba94502cbd36278db204120a37943.tar.gz" -BR2_LINUX_KERNEL_DEFCONFIG="bcm2709" -BR2_LINUX_KERNEL_DTS_SUPPORT=y -BR2_LINUX_KERNEL_INTREE_DTS_NAME="broadcom/bcm2710-rpi-3-b broadcom/bcm2710-rpi-3-b-plus broadcom/bcm2710-rpi-cm3" -BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y -BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y -BR2_PACKAGE_XZ=y -BR2_PACKAGE_LIBERATION=y -BR2_PACKAGE_QT5=y -BR2_PACKAGE_QT5BASE_EXAMPLES=y -BR2_PACKAGE_QT5BASE_GIF=y -BR2_PACKAGE_QT5WEBENGINE=y -BR2_PACKAGE_QT5WEBENGINE_PROPRIETARY_CODECS=y -BR2_PACKAGE_RPI_FIRMWARE=y -BR2_PACKAGE_RPI_FIRMWARE_BOOTCODE_BIN=y -BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI=y -BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE="board/raspberrypi3/config_3_qt5we.txt" -BR2_PACKAGE_RPI_USERLAND=y -BR2_PACKAGE_CA_CERTIFICATES=y -BR2_PACKAGE_NTP=y -BR2_PACKAGE_KMOD_TOOLS=y -BR2_TARGET_ROOTFS_EXT2=y -BR2_TARGET_ROOTFS_EXT2_4=y -BR2_TARGET_ROOTFS_EXT2_SIZE="400M" -# BR2_TARGET_ROOTFS_TAR is not set -BR2_PACKAGE_HOST_DOSFSTOOLS=y -BR2_PACKAGE_HOST_GENIMAGE=y -BR2_PACKAGE_HOST_KMOD_XZ=y -BR2_PACKAGE_HOST_MTOOLS=y diff --git a/configs/raspberrypi4_64_defconfig b/configs/raspberrypi4_64_defconfig index c0a33c3eb5c..ce79952ff75 100644 --- a/configs/raspberrypi4_64_defconfig +++ b/configs/raspberrypi4_64_defconfig @@ -11,7 +11,7 @@ BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi4-64/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi4-64/post-image.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,ac69f097e1fba94502cbd36278db204120a37943)/linux-ac69f097e1fba94502cbd36278db204120a37943.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,21b410140c47ffab5668399f6f143c7d7b935c8b)/linux-21b410140c47ffab5668399f6f143c7d7b935c8b.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="bcm2711" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="broadcom/bcm2711-rpi-4-b broadcom/bcm2711-rpi-400 broadcom/bcm2711-rpi-cm4 broadcom/bcm2711-rpi-cm4s" diff --git a/configs/raspberrypi4_defconfig b/configs/raspberrypi4_defconfig index 75078a3c2c8..a6df6fd9235 100644 --- a/configs/raspberrypi4_defconfig +++ b/configs/raspberrypi4_defconfig @@ -11,7 +11,7 @@ BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi4/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi4/post-image.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,ac69f097e1fba94502cbd36278db204120a37943)/linux-ac69f097e1fba94502cbd36278db204120a37943.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,21b410140c47ffab5668399f6f143c7d7b935c8b)/linux-21b410140c47ffab5668399f6f143c7d7b935c8b.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="bcm2711" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="broadcom/bcm2711-rpi-4-b broadcom/bcm2711-rpi-400 broadcom/bcm2711-rpi-cm4 broadcom/bcm2711-rpi-cm4s" diff --git a/configs/raspberrypi5_defconfig b/configs/raspberrypi5_defconfig index 6928e2ba0f9..63432f45d57 100644 --- a/configs/raspberrypi5_defconfig +++ b/configs/raspberrypi5_defconfig @@ -10,7 +10,7 @@ BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi5/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi5/post-image.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,ac69f097e1fba94502cbd36278db204120a37943)/linux-ac69f097e1fba94502cbd36278db204120a37943.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,21b410140c47ffab5668399f6f143c7d7b935c8b)/linux-21b410140c47ffab5668399f6f143c7d7b935c8b.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="bcm2712" BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/raspberrypi/linux-4k-page-size.fragment" BR2_LINUX_KERNEL_DTS_SUPPORT=y diff --git a/configs/raspberrypi_defconfig b/configs/raspberrypi_defconfig index 00525e050ec..fd8508661c5 100644 --- a/configs/raspberrypi_defconfig +++ b/configs/raspberrypi_defconfig @@ -9,7 +9,7 @@ BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi/post-image.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,ac69f097e1fba94502cbd36278db204120a37943)/linux-ac69f097e1fba94502cbd36278db204120a37943.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,21b410140c47ffab5668399f6f143c7d7b935c8b)/linux-21b410140c47ffab5668399f6f143c7d7b935c8b.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="broadcom/bcm2708-rpi-b-rev1 broadcom/bcm2708-rpi-b broadcom/bcm2708-rpi-b-plus broadcom/bcm2708-rpi-cm" diff --git a/configs/raspberrypicm4io_64_defconfig b/configs/raspberrypicm4io_64_defconfig index 648740c2730..53f5193db4c 100644 --- a/configs/raspberrypicm4io_64_defconfig +++ b/configs/raspberrypicm4io_64_defconfig @@ -11,7 +11,7 @@ BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypicm4io-64/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypicm4io-64/post-image.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,ac69f097e1fba94502cbd36278db204120a37943)/linux-ac69f097e1fba94502cbd36278db204120a37943.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,21b410140c47ffab5668399f6f143c7d7b935c8b)/linux-21b410140c47ffab5668399f6f143c7d7b935c8b.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="bcm2711" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="broadcom/bcm2711-rpi-cm4" diff --git a/configs/raspberrypicm4io_64_uboot_defconfig b/configs/raspberrypicm4io_64_uboot_defconfig new file mode 100644 index 00000000000..84ce16b9937 --- /dev/null +++ b/configs/raspberrypicm4io_64_uboot_defconfig @@ -0,0 +1,40 @@ +BR2_aarch64=y +BR2_cortex_a72=y +BR2_ARM_FPU_VFPV4=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_GLIBC_STABLE=y +BR2_GLOBAL_PATCH_DIR="board/raspberrypi/patches" +BR2_DOWNLOAD_FORCE_CHECK_HASHES=y +BR2_SYSTEM_DHCP="eth0" +BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypicm4io-64/post-build.sh" +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypicm4io-64/post-image.sh" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,21b410140c47ffab5668399f6f143c7d7b935c8b)/linux-21b410140c47ffab5668399f6f143c7d7b935c8b.tar.gz" +BR2_LINUX_KERNEL_DEFCONFIG="bcm2711" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="broadcom/bcm2711-rpi-cm4" +BR2_LINUX_KERNEL_INSTALL_TARGET=y +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y +BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y +BR2_PACKAGE_XZ=y +BR2_PACKAGE_RPI_FIRMWARE=y +BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI4=y +BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE="board/raspberrypicm4io-64/config_cm4io_64bit_uboot.txt" +BR2_PACKAGE_KMOD=y +BR2_PACKAGE_KMOD_TOOLS=y +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="120M" +# BR2_TARGET_ROOTFS_TAR is not set +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="rpi_arm64" +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_KMOD_XZ=y +BR2_PACKAGE_HOST_MTOOLS=y +BR2_PACKAGE_HOST_RASPBERRYPI_USBBOOT=y +BR2_PACKAGE_HOST_UBOOT_TOOLS=y +BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y +BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/raspberrypicm4io-64/boot.scr.in" diff --git a/configs/raspberrypicm4io_defconfig b/configs/raspberrypicm4io_defconfig index e5bbff76c13..01e02fd300d 100644 --- a/configs/raspberrypicm4io_defconfig +++ b/configs/raspberrypicm4io_defconfig @@ -11,7 +11,7 @@ BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypicm4io/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypicm4io/post-image.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,ac69f097e1fba94502cbd36278db204120a37943)/linux-ac69f097e1fba94502cbd36278db204120a37943.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,21b410140c47ffab5668399f6f143c7d7b935c8b)/linux-21b410140c47ffab5668399f6f143c7d7b935c8b.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="bcm2711" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="broadcom/bcm2711-rpi-cm4" diff --git a/configs/raspberrypicm5io_defconfig b/configs/raspberrypicm5io_defconfig index 122a25ed92e..706f759832b 100644 --- a/configs/raspberrypicm5io_defconfig +++ b/configs/raspberrypicm5io_defconfig @@ -10,7 +10,7 @@ BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypicm5io/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypicm5io/post-image.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,ac69f097e1fba94502cbd36278db204120a37943)/linux-ac69f097e1fba94502cbd36278db204120a37943.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,21b410140c47ffab5668399f6f143c7d7b935c8b)/linux-21b410140c47ffab5668399f6f143c7d7b935c8b.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="bcm2712" BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/raspberrypi/linux-4k-page-size.fragment" BR2_LINUX_KERNEL_DTS_SUPPORT=y diff --git a/configs/raspberrypizero2w_64_defconfig b/configs/raspberrypizero2w_64_defconfig index 7a00fa14ac5..e926f6f23df 100644 --- a/configs/raspberrypizero2w_64_defconfig +++ b/configs/raspberrypizero2w_64_defconfig @@ -9,7 +9,7 @@ BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypizero2w-64/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypizero2w-64/post-image.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,ac69f097e1fba94502cbd36278db204120a37943)/linux-ac69f097e1fba94502cbd36278db204120a37943.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,21b410140c47ffab5668399f6f143c7d7b935c8b)/linux-21b410140c47ffab5668399f6f143c7d7b935c8b.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="bcm2711" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="broadcom/bcm2710-rpi-zero-2-w" diff --git a/configs/raspberrypizero2w_defconfig b/configs/raspberrypizero2w_defconfig index 36e66676fa8..eb23324e114 100644 --- a/configs/raspberrypizero2w_defconfig +++ b/configs/raspberrypizero2w_defconfig @@ -10,7 +10,7 @@ BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypizero2w/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypizero2w/post-image.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,ac69f097e1fba94502cbd36278db204120a37943)/linux-ac69f097e1fba94502cbd36278db204120a37943.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,21b410140c47ffab5668399f6f143c7d7b935c8b)/linux-21b410140c47ffab5668399f6f143c7d7b935c8b.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="bcm2709" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="broadcom/bcm2710-rpi-zero-2-w" diff --git a/configs/roc_pc_rk3399_defconfig b/configs/roc_pc_rk3399_defconfig index 145e155fac7..c5c6771bdfc 100644 --- a/configs/roc_pc_rk3399_defconfig +++ b/configs/roc_pc_rk3399_defconfig @@ -1,6 +1,6 @@ BR2_aarch64=y BR2_cortex_a72_a53=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y BR2_GLOBAL_PATCH_DIR="board/firefly/roc-rk3399-pc/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_HOSTNAME="roc-rk3399-pc" @@ -10,7 +10,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/firefly/roc-rk3399-pc/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.56" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.18" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3399-roc-pc" @@ -23,19 +23,20 @@ BR2_TARGET_ROOTFS_EXT2_MKFS_OPTIONS="-O 64bit" BR2_TARGET_ARM_TRUSTED_FIRMWARE=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git" -BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="v2.11" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="v2.14" BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3399" BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES="" BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.07" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.01" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="roc-pc-rk3399" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y BR2_TARGET_UBOOT_NEEDS_PYELFTOOLS=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_NEEDS_GNUTLS=y BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y BR2_TARGET_UBOOT_FORMAT_CUSTOM=y diff --git a/configs/rock4se_defconfig b/configs/rock4se_defconfig index 29437b9be35..c4e13f6a397 100644 --- a/configs/rock4se_defconfig +++ b/configs/rock4se_defconfig @@ -12,7 +12,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/radxa/rock4se/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.28" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.8" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3399-rock-4se" @@ -29,7 +29,7 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2025.04" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.01" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="rock-4se-rk3399" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y diff --git a/configs/rockpro64_defconfig b/configs/rockpro64_defconfig index d6c217e9462..c31365ca6ba 100644 --- a/configs/rockpro64_defconfig +++ b/configs/rockpro64_defconfig @@ -1,6 +1,8 @@ BR2_aarch64=y BR2_cortex_a72_a53=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_10=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_GLIBC_STABLE=y BR2_GLOBAL_PATCH_DIR="board/pine64/rockpro64/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_HOSTNAME="rockpro64" @@ -10,7 +12,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/pine64/rockpro64/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.10.14" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.4" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/pine64/rockpro64/linux.fragment" BR2_LINUX_KERNEL_DTS_SUPPORT=y @@ -19,17 +21,18 @@ BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y BR2_LINUX_KERNEL_NEEDS_HOST_PYTHON3=y BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_EXT2_4=y -BR2_TARGET_ROOTFS_EXT2_SIZE="120M" +BR2_TARGET_ROOTFS_EXT2_SIZE="128M" +# BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ARM_TRUSTED_FIRMWARE=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.11" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.14" BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3399" BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES="" BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.10" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.01" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="rockpro64-rk3399" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y diff --git a/configs/rockpro64_ebbr_defconfig b/configs/rockpro64_ebbr_defconfig index 4d94d61d1f7..0a8fc46e58d 100644 --- a/configs/rockpro64_ebbr_defconfig +++ b/configs/rockpro64_ebbr_defconfig @@ -1,6 +1,8 @@ BR2_aarch64=y BR2_cortex_a72_a53=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_GLIBC_STABLE=y BR2_GLOBAL_PATCH_DIR="board/pine64/rockpro64-ebbr/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y @@ -9,7 +11,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/pine64/rockpro64-ebbr/post-image.sh support/ BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/pine64/rockpro64-ebbr/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.18" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.4" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/pine64/rockpro64-ebbr/linux.fragment" BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y @@ -22,7 +24,7 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="128M" # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ARM_TRUSTED_FIRMWARE=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.12" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.14" BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3399" BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL32_OPTEE=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES="" @@ -31,7 +33,7 @@ BR2_TARGET_GRUB2=y BR2_TARGET_GRUB2_BUILTIN_MODULES_EFI="boot linux ext2 fat squash4 part_msdos part_gpt normal efi_gop lsefisystab lsefimmap lsefi efifwsetup efitextmode efinet" BR2_TARGET_OPTEE_OS=y BR2_TARGET_OPTEE_OS_CUSTOM_VERSION=y -BR2_TARGET_OPTEE_OS_CUSTOM_VERSION_VALUE="4.5.0" +BR2_TARGET_OPTEE_OS_CUSTOM_VERSION_VALUE="4.8.0" BR2_TARGET_OPTEE_OS_NEEDS_DTC=y BR2_TARGET_OPTEE_OS_NEEDS_PYTHON_CRYPTOGRAPHY=y BR2_TARGET_OPTEE_OS_PLATFORM="rockchip-rk3399" @@ -39,7 +41,7 @@ BR2_TARGET_OPTEE_OS_ADDITIONAL_VARIABLES="CFG_TEE_CORE_LOG_LEVEL=2 CFG_DT=y CFG_ BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2025.01" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.01" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="rockpro64-rk3399" BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/pine64/rockpro64-ebbr/u-boot.fragment" BR2_TARGET_UBOOT_NEEDS_DTC=y diff --git a/configs/roseapplepi_defconfig b/configs/roseapplepi_defconfig deleted file mode 100644 index 045bdfede2b..00000000000 --- a/configs/roseapplepi_defconfig +++ /dev/null @@ -1,35 +0,0 @@ -BR2_arm=y -BR2_cortex_a9=y -BR2_ARM_ENABLE_NEON=y -BR2_ARM_ENABLE_VFP=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_15=y -BR2_GLOBAL_PATCH_DIR="board/roseapplepi/patches" -BR2_SYSTEM_DHCP="eth0" -BR2_ROOTFS_POST_BUILD_SCRIPT="board/roseapplepi/post-build.sh" -BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" -BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/roseapplepi/genimage.cfg" -BR2_LINUX_KERNEL=y -BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.14" -BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/roseapplepi/linux.config" -BR2_LINUX_KERNEL_UIMAGE=y -BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x8000" -BR2_LINUX_KERNEL_DTS_SUPPORT=y -BR2_LINUX_KERNEL_INTREE_DTS_NAME="owl-s500-roseapplepi" -BR2_TARGET_ROOTFS_EXT2=y -BR2_TARGET_ROOTFS_EXT2_4=y -# BR2_TARGET_ROOTFS_TAR is not set -BR2_TARGET_S500_BOOTLOADER=y -BR2_TARGET_S500_BOOTLOADER_BOARD="linux/bubble_gum_sd" -BR2_TARGET_UBOOT=y -BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y -BR2_TARGET_UBOOT_CUSTOM_GIT=y -BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/xapp-le/u-boot.git" -BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="a035d2673a90143a1a74557503b2e137b1447ae6" -BR2_TARGET_UBOOT_BOARD_DEFCONFIG="actduino_bubble_gum_v10" -BR2_TARGET_UBOOT_NEEDS_DTC=y -BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y -BR2_PACKAGE_HOST_DOSFSTOOLS=y -BR2_PACKAGE_HOST_GENIMAGE=y -BR2_PACKAGE_HOST_MTOOLS=y diff --git a/configs/s6lx9_microboard_defconfig b/configs/s6lx9_microboard_defconfig deleted file mode 100644 index b2d1d49d79f..00000000000 --- a/configs/s6lx9_microboard_defconfig +++ /dev/null @@ -1,11 +0,0 @@ -BR2_microblazeel=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_4=y -BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0" -BR2_LINUX_KERNEL=y -BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.4.7" -BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/avnet/s6lx9_microboard/lx9_mmu_defconfig" -BR2_LINUX_KERNEL_CUSTOM_DTS_PATH="board/avnet/s6lx9_microboard/lx9_mmu.dts" -BR2_TARGET_ROOTFS_INITRAMFS=y -# BR2_TARGET_ROOTFS_TAR is not set diff --git a/configs/sheevaplug_defconfig b/configs/sheevaplug_defconfig index 855efedafa5..a6a324213c5 100644 --- a/configs/sheevaplug_defconfig +++ b/configs/sheevaplug_defconfig @@ -7,6 +7,7 @@ BR2_SYSTEM_DHCP="eth0" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.14.336" +BR2_LINUX_KERNEL_LICENSE_FILES="COPYING" BR2_LINUX_KERNEL_DEFCONFIG="mvebu_v5" BR2_LINUX_KERNEL_APPENDED_UIMAGE=y BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x8000" diff --git a/configs/sipeed_licheepi_4a_defconfig b/configs/sipeed_licheepi_4a_defconfig index c7867ed05d7..602cd50e0b2 100644 --- a/configs/sipeed_licheepi_4a_defconfig +++ b/configs/sipeed_licheepi_4a_defconfig @@ -2,6 +2,7 @@ BR2_riscv=y BR2_RISCV_ISA_RVC=y BR2_RISCV_ISA_RVV=y BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_GCC_VERSION_15_X=y BR2_GLOBAL_PATCH_DIR="board/sipeed/licheepi_4a/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_HOSTNAME="licheepi4a" diff --git a/configs/sipeed_licheepi_zero_defconfig b/configs/sipeed_licheepi_zero_defconfig index e92c1d854e9..0c60a5c7635 100644 --- a/configs/sipeed_licheepi_zero_defconfig +++ b/configs/sipeed_licheepi_zero_defconfig @@ -1,7 +1,11 @@ BR2_arm=y BR2_cortex_a7=y BR2_ARM_FPU_VFPV4=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_3=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV7_EABIHF_GLIBC_STABLE=y +BR2_GLOBAL_PATCH_DIR="board/sipeed/licheepi_zero/patches" +BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_TARGET_GENERIC_HOSTNAME="licheepi-zero" BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot for the LicheePi Zero" BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" @@ -10,10 +14,10 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/sipeed/licheepi_zero/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.3.5" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.43" BR2_LINUX_KERNEL_DEFCONFIG="sunxi" BR2_LINUX_KERNEL_DTS_SUPPORT=y -BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun8i-v3s-licheepi-zero sun8i-v3s-licheepi-zero-dock" +BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun8i-v3s-licheepi-zero allwinner/sun8i-v3s-licheepi-zero-dock" BR2_PACKAGE_LINUX_FIRMWARE=y BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX=y BR2_PACKAGE_WPA_SUPPLICANT=y @@ -23,11 +27,12 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.01" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2025.07" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="LicheePi_Zero" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_NEEDS_GNUTLS=y BR2_TARGET_UBOOT_FORMAT_CUSTOM=y BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-sunxi-with-spl.bin" BR2_PACKAGE_HOST_DOSFSTOOLS=y diff --git a/configs/stm32f429_disco_xip_defconfig b/configs/stm32f429_disco_xip_defconfig index 69266f567ea..d82088c7183 100644 --- a/configs/stm32f429_disco_xip_defconfig +++ b/configs/stm32f429_disco_xip_defconfig @@ -8,7 +8,7 @@ BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_ROOTFS_POST_BUILD_SCRIPT="board/stmicroelectronics/common/stm32f4xx/stm32-post-build.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.1.133" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.1.189" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/stmicroelectronics/stm32f429-disco/linux.config" BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y diff --git a/configs/stm32f469_disco_sd_defconfig b/configs/stm32f469_disco_sd_defconfig index 6193855bd25..af3782dd401 100644 --- a/configs/stm32f469_disco_sd_defconfig +++ b/configs/stm32f469_disco_sd_defconfig @@ -8,7 +8,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/stmicroelectronics/stm32f469-disco/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.179" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.222" BR2_LINUX_KERNEL_DEFCONFIG="stm32" BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(LINUX_DIR)/arch/arm/configs/dram_0x00000000.config board/stmicroelectronics/stm32f469-disco/linux-sd.fragment" BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y @@ -24,7 +24,7 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="32M" BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2025.04" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.10" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="stm32f469-discovery" BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_PACKAGE_HOST_GENIMAGE=y diff --git a/configs/stm32f469_disco_xip_defconfig b/configs/stm32f469_disco_xip_defconfig index f014f77d765..605f7afdef0 100644 --- a/configs/stm32f469_disco_xip_defconfig +++ b/configs/stm32f469_disco_xip_defconfig @@ -8,7 +8,7 @@ BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_ROOTFS_POST_BUILD_SCRIPT="board/stmicroelectronics/common/stm32f4xx/stm32-post-build.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.179" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.222" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/stmicroelectronics/stm32f469-disco/linux-xip.config" BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y diff --git a/configs/stm32f746_disco_sd_defconfig b/configs/stm32f746_disco_sd_defconfig index 71004ef8231..75c309a34c6 100644 --- a/configs/stm32f746_disco_sd_defconfig +++ b/configs/stm32f746_disco_sd_defconfig @@ -10,7 +10,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/stmicroelectronics/stm32f746-disco/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.179" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.222" BR2_LINUX_KERNEL_DEFCONFIG="stm32" BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/stmicroelectronics/stm32f746-disco/linux.fragment" BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y @@ -24,7 +24,7 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="32M" BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2025.04" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.10" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="stm32f746-disco" BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_PACKAGE_HOST_GENIMAGE=y diff --git a/configs/stm32f769_disco_sd_defconfig b/configs/stm32f769_disco_sd_defconfig index e0c592ad82c..6732314c285 100644 --- a/configs/stm32f769_disco_sd_defconfig +++ b/configs/stm32f769_disco_sd_defconfig @@ -8,7 +8,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/stmicroelectronics/stm32f769-disco/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.179" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.222" BR2_LINUX_KERNEL_DEFCONFIG="stm32" BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(LINUX_DIR)/arch/arm/configs/dram_0xc0000000.config board/stmicroelectronics/stm32f769-disco/linux-sd.fragment" BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y @@ -23,7 +23,7 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="32M" BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2025.04" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.10" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="stm32f769-disco" BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_PACKAGE_HOST_GENIMAGE=y diff --git a/configs/stm32h747_disco_sd_defconfig b/configs/stm32h747_disco_sd_defconfig new file mode 100644 index 00000000000..a3b46f94e17 --- /dev/null +++ b/configs/stm32h747_disco_sd_defconfig @@ -0,0 +1,32 @@ +BR2_arm=y +BR2_cortex_m7=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV7M_UCLIBC_STABLE=y +BR2_GLOBAL_PATCH_DIR="board/stmicroelectronics/stm32h747-disco/patches" +BR2_DOWNLOAD_FORCE_CHECK_HASHES=y +BR2_ROOTFS_POST_BUILD_SCRIPT="board/stmicroelectronics/stm32h747-disco/post-build.sh" +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/stmicroelectronics/stm32h747-disco/genimage.cfg" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.56" +BR2_LINUX_KERNEL_DEFCONFIG="stm32" +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(LINUX_DIR)/arch/arm/configs/dram_0xd0000000.config board/stmicroelectronics/stm32h747-disco/linux-sd.fragment" +BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y +BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="zImage" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="st/stm32h747i-disco" +BR2_LINUX_KERNEL_INSTALL_TARGET=y +BR2_PACKAGE_EVTEST=y +# BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_SIZE="32M" +# BR2_TARGET_ROOTFS_TAR is not set +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.10" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="stm32h747-disco" +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_OPENOCD=y diff --git a/configs/stm32mp135f_dk_defconfig b/configs/stm32mp135f_dk_defconfig index 3ba1acac811..cc72d397f3b 100644 --- a/configs/stm32mp135f_dk_defconfig +++ b/configs/stm32mp135f_dk_defconfig @@ -1,6 +1,8 @@ BR2_arm=y BR2_cortex_a7=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV7_EABIHF_GLIBC_STABLE=y BR2_GLOBAL_PATCH_DIR="board/stmicroelectronics/common/stm32mp1xx/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y @@ -8,7 +10,7 @@ BR2_ROOTFS_OVERLAY="board/stmicroelectronics/stm32mp135f-dk/overlay" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/stmicroelectronics/common/stm32mp1xx/post-image.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.22" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.112" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/stmicroelectronics/stm32mp135f-dk/linux.config" BR2_LINUX_KERNEL_DTS_SUPPORT=y @@ -21,7 +23,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_ROOTFS_EXT2_SIZE="120M" # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ARM_TRUSTED_FIRMWARE=y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_LATEST_LTS_2_10_VERSION=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_LATEST_LTS_2_12_VERSION=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="stm32mp1" BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y @@ -33,20 +35,21 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES="fip.bin *.stm32" BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_DTC=y BR2_TARGET_OPTEE_OS=y BR2_TARGET_OPTEE_OS_CUSTOM_VERSION=y -BR2_TARGET_OPTEE_OS_CUSTOM_VERSION_VALUE="4.3.0" +BR2_TARGET_OPTEE_OS_CUSTOM_VERSION_VALUE="4.9.0" BR2_TARGET_OPTEE_OS_NEEDS_PYTHON_CRYPTOGRAPHY=y BR2_TARGET_OPTEE_OS_PLATFORM="stm32mp1" BR2_TARGET_OPTEE_OS_PLATFORM_FLAVOR="135F_DK" BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2025.04" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.10" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="stm32mp13" +BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_TARGET_UBOOT_NEEDS_GNUTLS=y # BR2_TARGET_UBOOT_FORMAT_BIN is not set BR2_TARGET_UBOOT_FORMAT_CUSTOM=y BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-nodtb.bin u-boot.dtb" -BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="DEVICE_TREE=stm32mp135f-dk" +BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="DEVICE_TREE=st/stm32mp135f-dk" BR2_PACKAGE_HOST_GENIMAGE=y diff --git a/configs/stm32mp157a_dk1_defconfig b/configs/stm32mp157a_dk1_defconfig index d96ff54dc9f..464b34e0b0d 100644 --- a/configs/stm32mp157a_dk1_defconfig +++ b/configs/stm32mp157a_dk1_defconfig @@ -1,13 +1,15 @@ BR2_arm=y BR2_cortex_a7=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV7_EABIHF_GLIBC_STABLE=y BR2_GLOBAL_PATCH_DIR="board/stmicroelectronics/common/stm32mp1xx/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_ROOTFS_OVERLAY="board/stmicroelectronics/stm32mp157a-dk1/overlay/" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/stmicroelectronics/common/stm32mp1xx/post-image.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.22" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.112" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/stmicroelectronics/stm32mp157a-dk1/linux.config" BR2_LINUX_KERNEL_DTS_SUPPORT=y @@ -18,7 +20,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_ROOTFS_EXT2_SIZE="120M" # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ARM_TRUSTED_FIRMWARE=y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_LATEST_LTS_2_10_VERSION=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_LATEST_LTS_2_12_VERSION=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="stm32mp1" BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y @@ -30,8 +32,9 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_DTC=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2025.04" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.10" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="stm32mp15_trusted" +BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_TARGET_UBOOT_NEEDS_GNUTLS=y @@ -39,5 +42,5 @@ BR2_TARGET_UBOOT_NEEDS_GNUTLS=y BR2_TARGET_UBOOT_FORMAT_DTB=y BR2_TARGET_UBOOT_FORMAT_CUSTOM=y BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-nodtb.bin" -BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="DEVICE_TREE=stm32mp157a-dk1" +BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="DEVICE_TREE=st/stm32mp157a-dk1" BR2_PACKAGE_HOST_GENIMAGE=y diff --git a/configs/stm32mp157c_dk2_defconfig b/configs/stm32mp157c_dk2_defconfig index 183e3ab8621..2cac66a944a 100644 --- a/configs/stm32mp157c_dk2_defconfig +++ b/configs/stm32mp157c_dk2_defconfig @@ -1,13 +1,15 @@ BR2_arm=y BR2_cortex_a7=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV7_EABIHF_GLIBC_STABLE=y BR2_GLOBAL_PATCH_DIR="board/stmicroelectronics/common/stm32mp1xx/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_ROOTFS_OVERLAY="board/stmicroelectronics/stm32mp157c-dk2/overlay/" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/stmicroelectronics/common/stm32mp1xx/post-image.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.22" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.112" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/stmicroelectronics/stm32mp157c-dk2/linux.config" BR2_LINUX_KERNEL_DTS_SUPPORT=y @@ -18,7 +20,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_ROOTFS_EXT2_SIZE="120M" # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ARM_TRUSTED_FIRMWARE=y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_LATEST_LTS_2_10_VERSION=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_LATEST_LTS_2_12_VERSION=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="stm32mp1" BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y @@ -30,8 +32,9 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_DTC=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2025.04" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.10" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="stm32mp15_trusted" +BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y BR2_TARGET_UBOOT_NEEDS_GNUTLS=y @@ -39,5 +42,5 @@ BR2_TARGET_UBOOT_NEEDS_GNUTLS=y BR2_TARGET_UBOOT_FORMAT_DTB=y BR2_TARGET_UBOOT_FORMAT_CUSTOM=y BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-nodtb.bin" -BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="DEVICE_TREE=stm32mp157c-dk2" +BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="DEVICE_TREE=st/stm32mp157c-dk2" BR2_PACKAGE_HOST_GENIMAGE=y diff --git a/configs/ti_am62ax_sk_defconfig b/configs/ti_am62ax_sk_defconfig index 0b3ebe6242a..a4c35a106e6 100644 --- a/configs/ti_am62ax_sk_defconfig +++ b/configs/ti_am62ax_sk_defconfig @@ -1,5 +1,7 @@ BR2_aarch64=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_10=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_GLIBC_STABLE=y BR2_GLOBAL_PATCH_DIR="board/ti/am62ax-sk/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_ROOTFS_POST_BUILD_SCRIPT="board/ti/common/am6xx/post-build.sh" @@ -8,7 +10,7 @@ BR2_ROOTFS_POST_BUILD_SCRIPT_ARGS="-c ttyS2,115200n8 -d k3-am62a7-sk.dtb -l am62 BR2_ROOTFS_POST_IMAGE_SCRIPT_ARGS="-c board/ti/am62ax-sk/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.10" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="7.2.10" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/ti/am62ax-sk/linux.config" BR2_LINUX_KERNEL_DTS_SUPPORT=y @@ -18,7 +20,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_ROOTFS_EXT2_SIZE="256M" BR2_TARGET_ARM_TRUSTED_FIRMWARE=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.11" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.15.0" BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="k3" BR2_TARGET_ARM_TRUSTED_FIRMWARE_TARGET_BOARD="lite" BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL32_OPTEE=y @@ -26,12 +28,12 @@ BR2_TARGET_OPTEE_OS=y BR2_TARGET_OPTEE_OS_PLATFORM="k3-am62x" BR2_TARGET_TI_K3_R5_LOADER=y BR2_TARGET_TI_K3_R5_LOADER_CUSTOM_VERSION=y -BR2_TARGET_TI_K3_R5_LOADER_CUSTOM_VERSION_VALUE="2024.07" +BR2_TARGET_TI_K3_R5_LOADER_CUSTOM_VERSION_VALUE="2026.07" BR2_TARGET_TI_K3_R5_LOADER_BOARD_DEFCONFIG="am62ax_evm_r5" BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.07" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.07" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="am62ax_evm_a53" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y diff --git a/configs/ti_am62px_sk_defconfig b/configs/ti_am62px_sk_defconfig index e53b41ed5eb..c91f3094a20 100644 --- a/configs/ti_am62px_sk_defconfig +++ b/configs/ti_am62px_sk_defconfig @@ -1,5 +1,7 @@ BR2_aarch64=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_10=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_GLIBC_STABLE=y BR2_GLOBAL_PATCH_DIR="board/ti/am62px-sk/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_ROOTFS_POST_BUILD_SCRIPT="board/ti/common/am6xx/post-build.sh" @@ -8,7 +10,7 @@ BR2_ROOTFS_POST_BUILD_SCRIPT_ARGS="-c ttyS2,115200n8 -d k3-am62p5-sk.dtb -l am62 BR2_ROOTFS_POST_IMAGE_SCRIPT_ARGS="-c board/ti/am62px-sk/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.10" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="7.2.10" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="ti/k3-am62p5-sk" @@ -17,7 +19,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_ROOTFS_EXT2_SIZE="256M" BR2_TARGET_ARM_TRUSTED_FIRMWARE=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.11" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.15.0" BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="k3" BR2_TARGET_ARM_TRUSTED_FIRMWARE_TARGET_BOARD="lite" BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL32_OPTEE=y @@ -25,12 +27,12 @@ BR2_TARGET_OPTEE_OS=y BR2_TARGET_OPTEE_OS_PLATFORM="k3-am62x" BR2_TARGET_TI_K3_R5_LOADER=y BR2_TARGET_TI_K3_R5_LOADER_CUSTOM_VERSION=y -BR2_TARGET_TI_K3_R5_LOADER_CUSTOM_VERSION_VALUE="2024.07" +BR2_TARGET_TI_K3_R5_LOADER_CUSTOM_VERSION_VALUE="2026.07" BR2_TARGET_TI_K3_R5_LOADER_BOARD_DEFCONFIG="am62px_evm_r5" BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.07" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.07" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="am62px_evm_a53" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y diff --git a/configs/ti_am62x_sk_defconfig b/configs/ti_am62x_sk_defconfig index 28e6fc03ba1..72df7551174 100644 --- a/configs/ti_am62x_sk_defconfig +++ b/configs/ti_am62x_sk_defconfig @@ -1,5 +1,7 @@ BR2_aarch64=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_GLIBC_STABLE=y BR2_GLOBAL_PATCH_DIR="board/ti/am62x-sk/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_ROOTFS_POST_BUILD_SCRIPT="board/ti/common/am6xx/post-build.sh" @@ -8,7 +10,7 @@ BR2_ROOTFS_POST_BUILD_SCRIPT_ARGS="-c ttyS2,115200n8 -d k3-am625-sk.dtb -l am62x BR2_ROOTFS_POST_IMAGE_SCRIPT_ARGS="-c board/ti/am62x-sk/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.36" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.112" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="ti/k3-am625-sk" @@ -26,12 +28,12 @@ BR2_TARGET_OPTEE_OS=y BR2_TARGET_OPTEE_OS_PLATFORM="k3-am62x" BR2_TARGET_TI_K3_R5_LOADER=y BR2_TARGET_TI_K3_R5_LOADER_CUSTOM_VERSION=y -BR2_TARGET_TI_K3_R5_LOADER_CUSTOM_VERSION_VALUE="2025.07" +BR2_TARGET_TI_K3_R5_LOADER_CUSTOM_VERSION_VALUE="2026.10" BR2_TARGET_TI_K3_R5_LOADER_BOARD_DEFCONFIG="am62x_evm_r5" BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2025.07" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.10" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="am62x_evm_a53" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y diff --git a/configs/ti_am64x_sk_defconfig b/configs/ti_am64x_sk_defconfig index a9ec5e3d536..f914436d2d7 100644 --- a/configs/ti_am64x_sk_defconfig +++ b/configs/ti_am64x_sk_defconfig @@ -1,5 +1,7 @@ BR2_aarch64=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_10=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_GLIBC_STABLE=y BR2_GLOBAL_PATCH_DIR="board/ti/am64x-sk/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_ROOTFS_POST_BUILD_SCRIPT="board/ti/common/am6xx/post-build.sh" @@ -8,7 +10,7 @@ BR2_ROOTFS_POST_BUILD_SCRIPT_ARGS="-c ttyS2,115200n8 -d k3-am642-sk.dtb -l am64x BR2_ROOTFS_POST_IMAGE_SCRIPT_ARGS="-c board/ti/am64x-sk/genimage.cfg" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.10" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="7.2.10" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="ti/k3-am642-sk" @@ -16,10 +18,10 @@ BR2_PACKAGE_LINUX_FIRMWARE=y BR2_PACKAGE_LINUX_FIRMWARE_TI_WL18XX=y BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_EXT2_4=y -BR2_TARGET_ROOTFS_EXT2_SIZE="120M" +BR2_TARGET_ROOTFS_EXT2_SIZE="180M" BR2_TARGET_ARM_TRUSTED_FIRMWARE=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.11" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.15.0" BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="k3" BR2_TARGET_ARM_TRUSTED_FIRMWARE_TARGET_BOARD="lite" BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL32_OPTEE=y @@ -27,12 +29,12 @@ BR2_TARGET_OPTEE_OS=y BR2_TARGET_OPTEE_OS_PLATFORM="k3-am64x" BR2_TARGET_TI_K3_R5_LOADER=y BR2_TARGET_TI_K3_R5_LOADER_CUSTOM_VERSION=y -BR2_TARGET_TI_K3_R5_LOADER_CUSTOM_VERSION_VALUE="2024.07" +BR2_TARGET_TI_K3_R5_LOADER_CUSTOM_VERSION_VALUE="2026.07" BR2_TARGET_TI_K3_R5_LOADER_BOARD_DEFCONFIG="am64x_evm_r5" BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.07" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.07" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="am64x_evm_a53" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y diff --git a/configs/ti_tda4vm_sk_defconfig b/configs/ti_tda4vm_sk_defconfig new file mode 100644 index 00000000000..be2529fb37f --- /dev/null +++ b/configs/ti_tda4vm_sk_defconfig @@ -0,0 +1,50 @@ +BR2_aarch64=y +BR2_cortex_a72=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_GLIBC_STABLE=y +BR2_GLOBAL_PATCH_DIR="board/ti/tda4vm-sk/patches" +BR2_DOWNLOAD_FORCE_CHECK_HASHES=y +BR2_SYSTEM_DHCP="eth0" +BR2_ROOTFS_POST_BUILD_SCRIPT="board/ti/tda4vm-sk/post-build.sh" +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/ti/tda4vm-sk/genimage.cfg" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.16" +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="ti/k3-j721e-sk" +BR2_LINUX_KERNEL_DTB_KEEP_DIRNAME=y +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="256M" +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_LATEST_LTS_2_12_VERSION=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="k3" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_TARGET_BOARD="generic" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL32_OPTEE=y +BR2_TARGET_OPTEE_OS=y +BR2_TARGET_OPTEE_OS_PLATFORM="k3-j721e" +BR2_TARGET_TI_K3_R5_LOADER=y +BR2_TARGET_TI_K3_R5_LOADER_CUSTOM_VERSION=y +BR2_TARGET_TI_K3_R5_LOADER_CUSTOM_VERSION_VALUE="2026.01" +BR2_TARGET_TI_K3_R5_LOADER_BOARD_DEFCONFIG="j721e_sk_r5" +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.01" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="j721e_sk_a72" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y +BR2_TARGET_UBOOT_NEEDS_OPTEE_TEE=y +BR2_TARGET_UBOOT_NEEDS_OPTEE_TEE_RAW_BIN=y +BR2_TARGET_UBOOT_USE_BINMAN=y +# BR2_TARGET_UBOOT_FORMAT_BIN is not set +BR2_TARGET_UBOOT_FORMAT_IMG=y +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="tispl.bin" +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y diff --git a/configs/ts4900_defconfig b/configs/ts4900_defconfig deleted file mode 100644 index e7950cea4b1..00000000000 --- a/configs/ts4900_defconfig +++ /dev/null @@ -1,16 +0,0 @@ -BR2_arm=y -BR2_cortex_a9=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_12=y -BR2_ROOTFS_POST_IMAGE_SCRIPT="board/technologic/ts4900/post-image.sh" -BR2_LINUX_KERNEL=y -BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.12" -BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7" -BR2_LINUX_KERNEL_UIMAGE=y -BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x10008000" -BR2_LINUX_KERNEL_DTS_SUPPORT=y -BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6q-ts4900" -BR2_LINUX_KERNEL_INSTALL_TARGET=y -BR2_PACKAGE_TS4900_FPGA=y -BR2_TARGET_ROOTFS_EXT2=y -BR2_PACKAGE_HOST_GENIMAGE=y diff --git a/configs/ts5500_defconfig b/configs/ts5500_defconfig deleted file mode 100644 index 62d80839b70..00000000000 --- a/configs/ts5500_defconfig +++ /dev/null @@ -1,13 +0,0 @@ -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14=y -BR2_TARGET_GENERIC_GETTY_PORT="ttyS1" -BR2_ROOTFS_OVERLAY="board/technologic/ts5500/fs-overlay" -BR2_LINUX_KERNEL=y -BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.14" -BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/technologic/ts5500/linux-4.14.config" -BR2_LINUX_KERNEL_INSTALL_TARGET=y -BR2_TARGET_ROOTFS_EXT2=y -BR2_TARGET_ROOTFS_EXT2_4=y -BR2_TARGET_SYSLINUX=y -BR2_TARGET_SYSLINUX_MBR=y diff --git a/configs/versal2_vek385_defconfig b/configs/versal2_vek385_defconfig new file mode 100644 index 00000000000..89d2385d1d5 --- /dev/null +++ b/configs/versal2_vek385_defconfig @@ -0,0 +1,55 @@ +BR2_aarch64=y +BR2_cortex_a78=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_GLIBC_STABLE=y +BR2_TOOLCHAIN_BARE_METAL_BUILDROOT=y +BR2_TOOLCHAIN_BARE_METAL_BUILDROOT_ARCH="microblazeel-buildroot-elf riscv32-buildroot-elf" +BR2_TOOLCHAIN_BARE_METAL_BUILDROOT_MULTILIB=y +BR2_GLOBAL_PATCH_DIR="board/xilinx/xilinx_v2026.1/patches board/xilinx/linux_6.18.40/patches" +BR2_DOWNLOAD_FORCE_CHECK_HASHES=y +BR2_ROOTFS_POST_BUILD_SCRIPT="board/versal2/post-build.sh" +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/versal2/post-image.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="ttyAMA1,115200 sdd2" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.18_LTS_2026.1_update_merge_v6.18.40)/xlnx_rebase_v6.18_LTS_2026.1_update_merge_v6.18.40.tar.gz" +BR2_LINUX_KERNEL_DEFCONFIG="xilinx" +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y +BR2_PACKAGE_XILINX_FPGAUTIL=y +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +# BR2_TARGET_ROOTFS_TAR is not set +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,arm-trusted-firmware,xlnx-rebase-v2.14_2026.1)/xlnx-rebase-v2.14_2026.1.tar.gz" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="versal2" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31_UBOOT=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL32_OPTEE=y +BR2_TARGET_OPTEE_OS=y +BR2_TARGET_OPTEE_OS_CUSTOM_TARBALL=y +BR2_TARGET_OPTEE_OS_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,optee_os,xlnx-rebase-v4.9.0_2026.1)/xlnx-rebase-v4.9.0_2026.1.tar.gz" +BR2_TARGET_OPTEE_OS_NEEDS_DTC=y +BR2_TARGET_OPTEE_OS_NEEDS_PYTHON_CRYPTOGRAPHY=y +BR2_TARGET_OPTEE_OS_PLATFORM="versal2" +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_TARBALL=y +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx-rebase-v2026.01_2026.1)/xlnx-rebase-v2026.01_2026.1.tar.gz" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="amd_versal2_virt" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_NEEDS_GNUTLS=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y +BR2_TARGET_UBOOT_FORMAT_DTB=y +BR2_TARGET_UBOOT_FORMAT_REMAKE_ELF=y +BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="DEVICE_TREE=versal2-vek385-revB" +BR2_TARGET_XILINX_EMBEDDEDSW=y +BR2_TARGET_XILINX_EMBEDDEDSW_VERSAL2_ASUFW=y +BR2_TARGET_XILINX_EMBEDDEDSW_VERSAL2_PLM=y +BR2_TARGET_XILINX_PREBUILT=y +BR2_PACKAGE_HOST_BOOTGEN=y +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y diff --git a/configs/versal_vck190_defconfig b/configs/versal_vck190_defconfig index c9d99876d55..5499f1a2294 100644 --- a/configs/versal_vck190_defconfig +++ b/configs/versal_vck190_defconfig @@ -5,14 +5,14 @@ BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_GLIBC_STABLE=y BR2_TOOLCHAIN_BARE_METAL_BUILDROOT=y BR2_TOOLCHAIN_BARE_METAL_BUILDROOT_ARCH="microblazeel-buildroot-elf" -BR2_GLOBAL_PATCH_DIR="board/xilinx/patches board/xilinx/linux_6.12.10/patches" +BR2_GLOBAL_PATCH_DIR="board/xilinx/xilinx_v2026.1/patches board/xilinx/linux_6.18.40/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_ROOTFS_POST_BUILD_SCRIPT="board/versal/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/versal/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="ttyAMA0,115200 mmcblk0p2" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.12_LTS_2025.1)/xlnx_rebase_v6.12_LTS_2025.1.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.18_LTS_2026.1_update_merge_v6.18.40)/xlnx_rebase_v6.18_LTS_2026.1_update_merge_v6.18.40.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="xilinx" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="xilinx/versal-vck190-rev1.1" @@ -23,13 +23,13 @@ BR2_TARGET_ROOTFS_EXT2_4=y # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ARM_TRUSTED_FIRMWARE=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL=y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,arm-trusted-firmware,xlnx_rebase_v2.12_2025.1)/xlnx_rebase_v2.12_2025.1.tar.gz" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,arm-trusted-firmware,xlnx-rebase-v2.14_2026.1)/xlnx-rebase-v2.14_2026.1.tar.gz" BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="versal" BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31_UBOOT=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_TARBALL=y -BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx_rebase_v2025.01_2025.1)/xlnx_rebase_v2025.01_2025.1.tar.gz" +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx-rebase-v2026.01_2026.1)/xlnx-rebase-v2026.01_2026.1.tar.gz" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="xilinx_versal_virt" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y @@ -43,7 +43,6 @@ BR2_TARGET_XILINX_EMBEDDEDSW=y BR2_TARGET_XILINX_EMBEDDEDSW_VERSAL_PLM=y BR2_TARGET_XILINX_EMBEDDEDSW_VERSAL_PSMFW=y BR2_TARGET_XILINX_PREBUILT=y -BR2_TARGET_XILINX_PREBUILT_VERSAL=y BR2_PACKAGE_HOST_BOOTGEN=y BR2_PACKAGE_HOST_DOSFSTOOLS=y BR2_PACKAGE_HOST_GENIMAGE=y diff --git a/configs/versal_vek280_defconfig b/configs/versal_vek280_defconfig index 4aa25f8d673..4072e7cb226 100644 --- a/configs/versal_vek280_defconfig +++ b/configs/versal_vek280_defconfig @@ -5,14 +5,14 @@ BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_GLIBC_STABLE=y BR2_TOOLCHAIN_BARE_METAL_BUILDROOT=y BR2_TOOLCHAIN_BARE_METAL_BUILDROOT_ARCH="microblazeel-buildroot-elf" -BR2_GLOBAL_PATCH_DIR="board/versal/vek280/patches board/xilinx/patches board/xilinx/linux_6.12.10/patches" +BR2_GLOBAL_PATCH_DIR="board/xilinx/xilinx_v2026.1/patches board/xilinx/linux_6.18.40/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_ROOTFS_POST_BUILD_SCRIPT="board/versal/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/versal/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="ttyAMA0,115200 mmcblk0p2" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.12_LTS_2025.1)/xlnx_rebase_v6.12_LTS_2025.1.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.18_LTS_2026.1_update_merge_v6.18.40)/xlnx_rebase_v6.18_LTS_2026.1_update_merge_v6.18.40.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="xilinx" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="xilinx/versal-vek280-revB" @@ -23,13 +23,13 @@ BR2_TARGET_ROOTFS_EXT2_4=y # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ARM_TRUSTED_FIRMWARE=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL=y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,arm-trusted-firmware,xlnx_rebase_v2.12_2025.1)/xlnx_rebase_v2.12_2025.1.tar.gz" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,arm-trusted-firmware,xlnx-rebase-v2.14_2026.1)/xlnx-rebase-v2.14_2026.1.tar.gz" BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="versal" BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31_UBOOT=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_TARBALL=y -BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx_rebase_v2025.01_2025.1)/xlnx_rebase_v2025.01_2025.1.tar.gz" +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx-rebase-v2026.01_2026.1)/xlnx-rebase-v2026.01_2026.1.tar.gz" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="xilinx_versal_virt" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y @@ -43,7 +43,6 @@ BR2_TARGET_XILINX_EMBEDDEDSW=y BR2_TARGET_XILINX_EMBEDDEDSW_VERSAL_PLM=y BR2_TARGET_XILINX_EMBEDDEDSW_VERSAL_PSMFW=y BR2_TARGET_XILINX_PREBUILT=y -BR2_TARGET_XILINX_PREBUILT_VERSAL=y BR2_TARGET_XILINX_PREBUILT_BOARD="vek280" BR2_PACKAGE_HOST_BOOTGEN=y BR2_PACKAGE_HOST_DOSFSTOOLS=y diff --git a/configs/versal_vpk120_defconfig b/configs/versal_vpk120_defconfig new file mode 100644 index 00000000000..37f353fb218 --- /dev/null +++ b/configs/versal_vpk120_defconfig @@ -0,0 +1,50 @@ +BR2_aarch64=y +BR2_cortex_a72=y +BR2_TOOLCHAIN_EXTERNAL=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y +BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_GLIBC_STABLE=y +BR2_TOOLCHAIN_BARE_METAL_BUILDROOT=y +BR2_TOOLCHAIN_BARE_METAL_BUILDROOT_ARCH="microblazeel-buildroot-elf" +BR2_GLOBAL_PATCH_DIR="board/xilinx/xilinx_v2026.1/patches board/xilinx/linux_6.18.40/patches" +BR2_DOWNLOAD_FORCE_CHECK_HASHES=y +BR2_ROOTFS_POST_BUILD_SCRIPT="board/versal/post-build.sh" +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/versal/post-image.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="ttyAMA0,115200 mmcblk0p2" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.18_LTS_2026.1_update_merge_v6.18.40)/xlnx_rebase_v6.18_LTS_2026.1_update_merge_v6.18.40.tar.gz" +BR2_LINUX_KERNEL_DEFCONFIG="xilinx" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="xilinx/versal-vpk120-revB" +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y +BR2_PACKAGE_XILINX_FPGAUTIL=y +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +# BR2_TARGET_ROOTFS_TAR is not set +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,arm-trusted-firmware,xlnx-rebase-v2.14_2026.1)/xlnx-rebase-v2.14_2026.1.tar.gz" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="versal" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31_UBOOT=y +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_TARBALL=y +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx-rebase-v2026.01_2026.1)/xlnx-rebase-v2026.01_2026.1.tar.gz" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="xilinx_versal_virt" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_NEEDS_GNUTLS=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y +BR2_TARGET_UBOOT_FORMAT_DTB=y +BR2_TARGET_UBOOT_FORMAT_REMAKE_ELF=y +BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="DEVICE_TREE=versal-vpk120-revB" +BR2_TARGET_XILINX_EMBEDDEDSW=y +BR2_TARGET_XILINX_EMBEDDEDSW_VERSAL_PLM=y +BR2_TARGET_XILINX_EMBEDDEDSW_VERSAL_PSMFW=y +BR2_TARGET_XILINX_PREBUILT=y +BR2_TARGET_XILINX_PREBUILT_BOARD="vpk120" +BR2_PACKAGE_HOST_BOOTGEN=y +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y diff --git a/configs/versal_vpk180_defconfig b/configs/versal_vpk180_defconfig index 500298c2f47..1a67d54bbc9 100644 --- a/configs/versal_vpk180_defconfig +++ b/configs/versal_vpk180_defconfig @@ -5,14 +5,14 @@ BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_GLIBC_STABLE=y BR2_TOOLCHAIN_BARE_METAL_BUILDROOT=y BR2_TOOLCHAIN_BARE_METAL_BUILDROOT_ARCH="microblazeel-buildroot-elf" -BR2_GLOBAL_PATCH_DIR="board/xilinx/patches board/xilinx/linux_6.12.10/patches" +BR2_GLOBAL_PATCH_DIR="board/xilinx/xilinx_v2026.1/patches board/xilinx/linux_6.18.40/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_ROOTFS_POST_BUILD_SCRIPT="board/versal/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/versal/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="ttyAMA0,115200 mmcblk0p2" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.12_LTS_2025.1)/xlnx_rebase_v6.12_LTS_2025.1.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.18_LTS_2026.1_update_merge_v6.18.40)/xlnx_rebase_v6.18_LTS_2026.1_update_merge_v6.18.40.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="xilinx" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="xilinx/versal-vpk180-revA" @@ -23,13 +23,13 @@ BR2_TARGET_ROOTFS_EXT2_4=y # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ARM_TRUSTED_FIRMWARE=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL=y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,arm-trusted-firmware,xlnx_rebase_v2.12_2025.1)/xlnx_rebase_v2.12_2025.1.tar.gz" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,arm-trusted-firmware,xlnx-rebase-v2.14_2026.1)/xlnx-rebase-v2.14_2026.1.tar.gz" BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="versal" BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31_UBOOT=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_TARBALL=y -BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx_rebase_v2025.01_2025.1)/xlnx_rebase_v2025.01_2025.1.tar.gz" +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx-rebase-v2026.01_2026.1)/xlnx-rebase-v2026.01_2026.1.tar.gz" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="xilinx_versal_virt" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y @@ -43,7 +43,6 @@ BR2_TARGET_XILINX_EMBEDDEDSW=y BR2_TARGET_XILINX_EMBEDDEDSW_VERSAL_PLM=y BR2_TARGET_XILINX_EMBEDDEDSW_VERSAL_PSMFW=y BR2_TARGET_XILINX_PREBUILT=y -BR2_TARGET_XILINX_PREBUILT_VERSAL=y BR2_TARGET_XILINX_PREBUILT_BOARD="vpk180" BR2_PACKAGE_HOST_BOOTGEN=y BR2_PACKAGE_HOST_DOSFSTOOLS=y diff --git a/configs/visionfive2_defconfig b/configs/visionfive2_defconfig index 8223e6faa17..6ae6f25a8a6 100644 --- a/configs/visionfive2_defconfig +++ b/configs/visionfive2_defconfig @@ -1,5 +1,5 @@ BR2_riscv=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_12=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_18=y BR2_GLOBAL_PATCH_DIR="board/visionfive2/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_SYSTEM_DHCP="eth0" @@ -7,11 +7,12 @@ BR2_ROOTFS_OVERLAY="board/visionfive2/overlay" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/visionfive2/post-image.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.24" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.55" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/visionfive2/linux_defconfig" BR2_LINUX_KERNEL_DTS_SUPPORT=y -BR2_LINUX_KERNEL_INTREE_DTS_NAME="starfive/jh7110-starfive-visionfive-2-v1.3b" +BR2_LINUX_KERNEL_INTREE_DTS_NAME="starfive/jh7110-starfive-visionfive-2-v1.2a starfive/jh7110-starfive-visionfive-2-v1.3b" +BR2_LINUX_KERNEL_DTB_KEEP_DIRNAME=y BR2_LINUX_KERNEL_INSTALL_TARGET=y BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y BR2_TARGET_ROOTFS_EXT2=y @@ -19,14 +20,14 @@ BR2_TARGET_ROOTFS_EXT2_4=y # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_OPENSBI=y BR2_TARGET_OPENSBI_CUSTOM_VERSION=y -BR2_TARGET_OPENSBI_CUSTOM_VERSION_VALUE="1.6" +BR2_TARGET_OPENSBI_CUSTOM_VERSION_VALUE="1.8.1" BR2_TARGET_OPENSBI_PLAT="generic" # BR2_TARGET_OPENSBI_INSTALL_JUMP_IMG is not set BR2_TARGET_OPENSBI_ADDITIONAL_VARIABLES="FW_TEXT_START=0x40000000 FW_OPTIONS=0" BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2025.04" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2026.07" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="starfive_visionfive2" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y diff --git a/configs/zynq_microzed_defconfig b/configs/zynq_microzed_defconfig index 87a06fa255f..fae1abc60f8 100644 --- a/configs/zynq_microzed_defconfig +++ b/configs/zynq_microzed_defconfig @@ -5,13 +5,13 @@ BR2_ARM_ENABLE_VFP=y BR2_TOOLCHAIN_EXTERNAL=y BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV7_EABIHF_GLIBC_STABLE=y -BR2_GLOBAL_PATCH_DIR="board/xilinx/patches board/xilinx/linux_6.12.10/patches" +BR2_GLOBAL_PATCH_DIR="board/xilinx/xilinx_v2026.1/patches board/xilinx/linux_6.18.40/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_ROOTFS_POST_BUILD_SCRIPT="board/zynq/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/zynq/post-image.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.12_LTS_2025.1)/xlnx_rebase_v6.12_LTS_2025.1.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.18_LTS_2026.1_update_merge_v6.18.40)/xlnx_rebase_v6.18_LTS_2026.1_update_merge_v6.18.40.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="xilinx_zynq" BR2_LINUX_KERNEL_UIMAGE=y BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x8000" @@ -24,7 +24,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_TARBALL=y -BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx_rebase_v2025.01_2025.1)/xlnx_rebase_v2025.01_2025.1.tar.gz" +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx-rebase-v2026.01_2026.1)/xlnx-rebase-v2026.01_2026.1.tar.gz" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="xilinx_zynq_virt" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y diff --git a/configs/zynq_zc702_defconfig b/configs/zynq_zc702_defconfig index afc13db1d46..e3fe95dabf8 100644 --- a/configs/zynq_zc702_defconfig +++ b/configs/zynq_zc702_defconfig @@ -5,13 +5,13 @@ BR2_ARM_ENABLE_VFP=y BR2_TOOLCHAIN_EXTERNAL=y BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV7_EABIHF_GLIBC_STABLE=y -BR2_GLOBAL_PATCH_DIR="board/xilinx/patches board/xilinx/linux_6.12.10/patches" +BR2_GLOBAL_PATCH_DIR="board/xilinx/xilinx_v2026.1/patches board/xilinx/linux_6.18.40/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_ROOTFS_POST_BUILD_SCRIPT="board/zynq/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/zynq/post-image.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.12_LTS_2025.1)/xlnx_rebase_v6.12_LTS_2025.1.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.18_LTS_2026.1_update_merge_v6.18.40)/xlnx_rebase_v6.18_LTS_2026.1_update_merge_v6.18.40.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="xilinx_zynq" BR2_LINUX_KERNEL_UIMAGE=y BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x8000" @@ -24,7 +24,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_TARBALL=y -BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx_rebase_v2025.01_2025.1)/xlnx_rebase_v2025.01_2025.1.tar.gz" +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx-rebase-v2026.01_2026.1)/xlnx-rebase-v2026.01_2026.1.tar.gz" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="xilinx_zynq_virt" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y diff --git a/configs/zynq_zc706_defconfig b/configs/zynq_zc706_defconfig index e0ebedf0de9..2bb670d8d99 100644 --- a/configs/zynq_zc706_defconfig +++ b/configs/zynq_zc706_defconfig @@ -5,13 +5,13 @@ BR2_ARM_ENABLE_VFP=y BR2_TOOLCHAIN_EXTERNAL=y BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV7_EABIHF_GLIBC_STABLE=y -BR2_GLOBAL_PATCH_DIR="board/xilinx/patches board/xilinx/linux_6.12.10/patches" +BR2_GLOBAL_PATCH_DIR="board/xilinx/xilinx_v2026.1/patches board/xilinx/linux_6.18.40/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_ROOTFS_POST_BUILD_SCRIPT="board/zynq/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/zynq/post-image.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.12_LTS_2025.1)/xlnx_rebase_v6.12_LTS_2025.1.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.18_LTS_2026.1_update_merge_v6.18.40)/xlnx_rebase_v6.18_LTS_2026.1_update_merge_v6.18.40.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="xilinx_zynq" BR2_LINUX_KERNEL_UIMAGE=y BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x8000" @@ -24,7 +24,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_TARBALL=y -BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx_rebase_v2025.01_2025.1)/xlnx_rebase_v2025.01_2025.1.tar.gz" +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx-rebase-v2026.01_2026.1)/xlnx-rebase-v2026.01_2026.1.tar.gz" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="xilinx_zynq_virt" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y diff --git a/configs/zynq_zed_defconfig b/configs/zynq_zed_defconfig index a9fe0d352c6..2c4db8bdad5 100644 --- a/configs/zynq_zed_defconfig +++ b/configs/zynq_zed_defconfig @@ -5,13 +5,13 @@ BR2_ARM_ENABLE_VFP=y BR2_TOOLCHAIN_EXTERNAL=y BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARMV7_EABIHF_GLIBC_STABLE=y -BR2_GLOBAL_PATCH_DIR="board/xilinx/patches board/xilinx/linux_6.12.10/patches" +BR2_GLOBAL_PATCH_DIR="board/xilinx/xilinx_v2026.1/patches board/xilinx/linux_6.18.40/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_ROOTFS_POST_BUILD_SCRIPT="board/zynq/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/zynq/post-image.sh" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.12_LTS_2025.1)/xlnx_rebase_v6.12_LTS_2025.1.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.18_LTS_2026.1_update_merge_v6.18.40)/xlnx_rebase_v6.18_LTS_2026.1_update_merge_v6.18.40.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="xilinx_zynq" BR2_LINUX_KERNEL_UIMAGE=y BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x8000" @@ -24,7 +24,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_TARBALL=y -BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx_rebase_v2025.01_2025.1)/xlnx_rebase_v2025.01_2025.1.tar.gz" +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx-rebase-v2026.01_2026.1)/xlnx-rebase-v2026.01_2026.1.tar.gz" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="xilinx_zynq_virt" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y diff --git a/configs/zynqmp_kria_kd240_defconfig b/configs/zynqmp_kria_kd240_defconfig index 2925e9324e2..52359fcd07f 100644 --- a/configs/zynqmp_kria_kd240_defconfig +++ b/configs/zynqmp_kria_kd240_defconfig @@ -4,14 +4,14 @@ BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_GLIBC_STABLE=y BR2_TOOLCHAIN_BARE_METAL_BUILDROOT=y BR2_TOOLCHAIN_BARE_METAL_BUILDROOT_ARCH="microblazeel-buildroot-elf" -BR2_GLOBAL_PATCH_DIR="board/xilinx/patches board/xilinx/linux_6.12.10/patches" +BR2_GLOBAL_PATCH_DIR="board/xilinx/xilinx_v2026.1/patches board/xilinx/linux_6.18.40/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_ROOTFS_POST_BUILD_SCRIPT="board/zynqmp/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/zynqmp/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="ttyPS1,115200 sda2" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.12_LTS_2025.1)/xlnx_rebase_v6.12_LTS_2025.1.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.18_LTS_2026.1_update_merge_v6.18.40)/xlnx_rebase_v6.18_LTS_2026.1_update_merge_v6.18.40.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="xilinx" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="xilinx/zynqmp-smk-k24-revA-sck-kd-g-revA" @@ -22,14 +22,14 @@ BR2_TARGET_ROOTFS_EXT2_4=y # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ARM_TRUSTED_FIRMWARE=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL=y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,arm-trusted-firmware,xlnx_rebase_v2.12_2025.1)/xlnx_rebase_v2.12_2025.1.tar.gz" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,arm-trusted-firmware,xlnx-rebase-v2.14_2026.1)/xlnx-rebase-v2.14_2026.1.tar.gz" BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="zynqmp" BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31_UBOOT=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="ZYNQMP_CONSOLE=cadence1" BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_TARBALL=y -BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx_rebase_v2025.01_2025.1)/xlnx_rebase_v2025.01_2025.1.tar.gz" +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx-rebase-v2026.01_2026.1)/xlnx-rebase-v2026.01_2026.1.tar.gz" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="xilinx_zynqmp_kria" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y diff --git a/configs/zynqmp_kria_kr260_defconfig b/configs/zynqmp_kria_kr260_defconfig index 8858c7cb20e..bf5fdfe5447 100644 --- a/configs/zynqmp_kria_kr260_defconfig +++ b/configs/zynqmp_kria_kr260_defconfig @@ -4,14 +4,14 @@ BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_GLIBC_STABLE=y BR2_TOOLCHAIN_BARE_METAL_BUILDROOT=y BR2_TOOLCHAIN_BARE_METAL_BUILDROOT_ARCH="microblazeel-buildroot-elf" -BR2_GLOBAL_PATCH_DIR="board/xilinx/patches board/xilinx/linux_6.12.10/patches" +BR2_GLOBAL_PATCH_DIR="board/xilinx/xilinx_v2026.1/patches board/xilinx/linux_6.18.40/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_ROOTFS_POST_BUILD_SCRIPT="board/zynqmp/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/zynqmp/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="ttyPS1,115200 sda2" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.12_LTS_2025.1)/xlnx_rebase_v6.12_LTS_2025.1.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.18_LTS_2026.1_update_merge_v6.18.40)/xlnx_rebase_v6.18_LTS_2026.1_update_merge_v6.18.40.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="xilinx" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="xilinx/zynqmp-smk-k26-revA-sck-kr-g-revB" @@ -22,14 +22,14 @@ BR2_TARGET_ROOTFS_EXT2_4=y # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ARM_TRUSTED_FIRMWARE=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL=y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,arm-trusted-firmware,xlnx_rebase_v2.12_2025.1)/xlnx_rebase_v2.12_2025.1.tar.gz" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,arm-trusted-firmware,xlnx-rebase-v2.14_2026.1)/xlnx-rebase-v2.14_2026.1.tar.gz" BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="zynqmp" BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31_UBOOT=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="ZYNQMP_CONSOLE=cadence1" BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_TARBALL=y -BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx_rebase_v2025.01_2025.1)/xlnx_rebase_v2025.01_2025.1.tar.gz" +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx-rebase-v2026.01_2026.1)/xlnx-rebase-v2026.01_2026.1.tar.gz" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="xilinx_zynqmp_kria" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y diff --git a/configs/zynqmp_kria_kv260_defconfig b/configs/zynqmp_kria_kv260_defconfig index c1d5fa186e7..a0a1d3557b1 100644 --- a/configs/zynqmp_kria_kv260_defconfig +++ b/configs/zynqmp_kria_kv260_defconfig @@ -4,14 +4,14 @@ BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_GLIBC_STABLE=y BR2_TOOLCHAIN_BARE_METAL_BUILDROOT=y BR2_TOOLCHAIN_BARE_METAL_BUILDROOT_ARCH="microblazeel-buildroot-elf" -BR2_GLOBAL_PATCH_DIR="board/xilinx/patches board/xilinx/linux_6.12.10/patches" +BR2_GLOBAL_PATCH_DIR="board/xilinx/xilinx_v2026.1/patches board/xilinx/linux_6.18.40/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_ROOTFS_POST_BUILD_SCRIPT="board/zynqmp/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/zynqmp/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="ttyPS1,115200 mmcblk1p2" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.12_LTS_2025.1)/xlnx_rebase_v6.12_LTS_2025.1.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.18_LTS_2026.1_update_merge_v6.18.40)/xlnx_rebase_v6.18_LTS_2026.1_update_merge_v6.18.40.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="xilinx" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="xilinx/zynqmp-smk-k26-revA-sck-kv-g-revB" @@ -22,14 +22,14 @@ BR2_TARGET_ROOTFS_EXT2_4=y # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ARM_TRUSTED_FIRMWARE=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL=y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,arm-trusted-firmware,xlnx_rebase_v2.12_2025.1)/xlnx_rebase_v2.12_2025.1.tar.gz" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,arm-trusted-firmware,xlnx-rebase-v2.14_2026.1)/xlnx-rebase-v2.14_2026.1.tar.gz" BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="zynqmp" BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31_UBOOT=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="ZYNQMP_CONSOLE=cadence1" BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_TARBALL=y -BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx_rebase_v2025.01_2025.1)/xlnx_rebase_v2025.01_2025.1.tar.gz" +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx-rebase-v2026.01_2026.1)/xlnx-rebase-v2026.01_2026.1.tar.gz" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="xilinx_zynqmp_kria" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y diff --git a/configs/zynqmp_zcu102_defconfig b/configs/zynqmp_zcu102_defconfig index 84d6f353eb0..623d37140dc 100644 --- a/configs/zynqmp_zcu102_defconfig +++ b/configs/zynqmp_zcu102_defconfig @@ -4,14 +4,14 @@ BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_GLIBC_STABLE=y BR2_TOOLCHAIN_BARE_METAL_BUILDROOT=y BR2_TOOLCHAIN_BARE_METAL_BUILDROOT_ARCH="microblazeel-buildroot-elf" -BR2_GLOBAL_PATCH_DIR="board/xilinx/patches board/xilinx/linux_6.12.10/patches" +BR2_GLOBAL_PATCH_DIR="board/xilinx/xilinx_v2026.1/patches board/xilinx/linux_6.18.40/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_ROOTFS_POST_BUILD_SCRIPT="board/zynqmp/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/zynqmp/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="ttyPS0,115200 mmcblk0p2" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.12_LTS_2025.1)/xlnx_rebase_v6.12_LTS_2025.1.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.18_LTS_2026.1_update_merge_v6.18.40)/xlnx_rebase_v6.18_LTS_2026.1_update_merge_v6.18.40.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="xilinx" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="xilinx/zynqmp-zcu102-rev1.0" @@ -22,13 +22,13 @@ BR2_TARGET_ROOTFS_EXT2_4=y # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ARM_TRUSTED_FIRMWARE=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL=y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,arm-trusted-firmware,xlnx_rebase_v2.12_2025.1)/xlnx_rebase_v2.12_2025.1.tar.gz" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,arm-trusted-firmware,xlnx-rebase-v2.14_2026.1)/xlnx-rebase-v2.14_2026.1.tar.gz" BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="zynqmp" BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31_UBOOT=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_TARBALL=y -BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx_rebase_v2025.01_2025.1)/xlnx_rebase_v2025.01_2025.1.tar.gz" +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx-rebase-v2026.01_2026.1)/xlnx-rebase-v2026.01_2026.1.tar.gz" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="xilinx_zynqmp_virt" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y diff --git a/configs/zynqmp_zcu104_defconfig b/configs/zynqmp_zcu104_defconfig index 182bd68589b..68213bbabf0 100644 --- a/configs/zynqmp_zcu104_defconfig +++ b/configs/zynqmp_zcu104_defconfig @@ -4,14 +4,14 @@ BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_GLIBC_STABLE=y BR2_TOOLCHAIN_BARE_METAL_BUILDROOT=y BR2_TOOLCHAIN_BARE_METAL_BUILDROOT_ARCH="microblazeel-buildroot-elf" -BR2_GLOBAL_PATCH_DIR="board/xilinx/patches board/xilinx/linux_6.12.10/patches" +BR2_GLOBAL_PATCH_DIR="board/xilinx/xilinx_v2026.1/patches board/xilinx/linux_6.18.40/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_ROOTFS_POST_BUILD_SCRIPT="board/zynqmp/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/zynqmp/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="ttyPS0,115200 mmcblk0p2" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.12_LTS_2025.1)/xlnx_rebase_v6.12_LTS_2025.1.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.18_LTS_2026.1_update_merge_v6.18.40)/xlnx_rebase_v6.18_LTS_2026.1_update_merge_v6.18.40.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="xilinx" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="xilinx/zynqmp-zcu104-revC" @@ -22,13 +22,13 @@ BR2_TARGET_ROOTFS_EXT2_4=y # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ARM_TRUSTED_FIRMWARE=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL=y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,arm-trusted-firmware,xlnx_rebase_v2.12_2025.1)/xlnx_rebase_v2.12_2025.1.tar.gz" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,arm-trusted-firmware,xlnx-rebase-v2.14_2026.1)/xlnx-rebase-v2.14_2026.1.tar.gz" BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="zynqmp" BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31_UBOOT=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_TARBALL=y -BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx_rebase_v2025.01_2025.1)/xlnx_rebase_v2025.01_2025.1.tar.gz" +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx-rebase-v2026.01_2026.1)/xlnx-rebase-v2026.01_2026.1.tar.gz" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="xilinx_zynqmp_virt" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y diff --git a/configs/zynqmp_zcu106_defconfig b/configs/zynqmp_zcu106_defconfig index ea1abd1e354..da3af3c6bbc 100644 --- a/configs/zynqmp_zcu106_defconfig +++ b/configs/zynqmp_zcu106_defconfig @@ -4,14 +4,14 @@ BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_AARCH64_GLIBC_STABLE=y BR2_TOOLCHAIN_BARE_METAL_BUILDROOT=y BR2_TOOLCHAIN_BARE_METAL_BUILDROOT_ARCH="microblazeel-buildroot-elf" -BR2_GLOBAL_PATCH_DIR="board/xilinx/patches board/xilinx/linux_6.12.10/patches" +BR2_GLOBAL_PATCH_DIR="board/xilinx/xilinx_v2026.1/patches board/xilinx/linux_6.18.40/patches" BR2_DOWNLOAD_FORCE_CHECK_HASHES=y BR2_ROOTFS_POST_BUILD_SCRIPT="board/zynqmp/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/zynqmp/post-image.sh" BR2_ROOTFS_POST_SCRIPT_ARGS="ttyPS0,115200 mmcblk0p2" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_TARBALL=y -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.12_LTS_2025.1)/xlnx_rebase_v6.12_LTS_2025.1.tar.gz" +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.18_LTS_2026.1_update_merge_v6.18.40)/xlnx_rebase_v6.18_LTS_2026.1_update_merge_v6.18.40.tar.gz" BR2_LINUX_KERNEL_DEFCONFIG="xilinx" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="xilinx/zynqmp-zcu106-revA" @@ -22,13 +22,13 @@ BR2_TARGET_ROOTFS_EXT2_4=y # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ARM_TRUSTED_FIRMWARE=y BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL=y -BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,arm-trusted-firmware,xlnx_rebase_v2.12_2025.1)/xlnx_rebase_v2.12_2025.1.tar.gz" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,arm-trusted-firmware,xlnx-rebase-v2.14_2026.1)/xlnx-rebase-v2.14_2026.1.tar.gz" BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="zynqmp" BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31_UBOOT=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_TARBALL=y -BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx_rebase_v2025.01_2025.1)/xlnx_rebase_v2025.01_2025.1.tar.gz" +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx-rebase-v2026.01_2026.1)/xlnx-rebase-v2026.01_2026.1.tar.gz" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="xilinx_zynqmp_virt" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_OPENSSL=y diff --git a/docs/manual/adding-packages-generic.adoc b/docs/manual/adding-packages-generic.adoc index 6827b9975e5..e7547460fd5 100644 --- a/docs/manual/adding-packages-generic.adoc +++ b/docs/manual/adding-packages-generic.adoc @@ -509,9 +509,9 @@ not and can not work as people would expect it should: * +LIBFOO_IGNORE_CVES+ is a space-separated list of CVEs that tells Buildroot CVE tracking tools which CVEs should be ignored for this package. This is typically used when the CVE is fixed by a patch in - the package, or when the CVE for some reason does not affect the - Buildroot package. A Makefile comment must always precede the - addition of a CVE to this variable. Example: + the package (see xref:additional-patch-documentation[]), or when the CVE for + some reason does not affect the Buildroot package. A Makefile comment must + always precede the addition of a CVE to this variable. Example: + ---- # 0001-fix-cve-2020-12345.patch diff --git a/docs/manual/adding-packages-golang.adoc b/docs/manual/adding-packages-golang.adoc index 6de0916a83e..21b6a122a97 100644 --- a/docs/manual/adding-packages-golang.adoc +++ b/docs/manual/adding-packages-golang.adoc @@ -94,20 +94,20 @@ therefore only use a few of them, or none. defaults to +.+. We then have two cases: ** +FOO_BUILD_TARGETS+ is +.+. In this case, we assume only one binary - will be produced, and that by default we name it after the package - name. If that is not appropriate, the name of the produced binary - can be overridden using +FOO_BIN_NAME+. - -** +FOO_BUILD_TARGETS+ is not +.+. In this case, we iterate over the - values to build each target, and for each produced a binary that is - the non-directory component of the target. For example if - +FOO_BUILD_TARGETS = cmd/docker cmd/dockerd+ the binaries produced - are +docker+ and +dockerd+. - -* +FOO_INSTALL_BINS+ can be used to pass the list of binaries that - should be installed in +/usr/bin+ on the target. If - +FOO_INSTALL_BINS+ is not specified, it defaults to the lower-case - name of package. + will be built and installed, and by default we name it after the + package name; if that is not appropriate, the name of the binary can + be overridden using +FOO_BIN_NAME+. + +** +FOO_BUILD_TARGETS+ is not +.+. In this case, it is interpreted as a + space-separated list, and we iterate over the targets to build and + install a binary named after the non-directory component of the + target. For example if +FOO_BUILD_TARGETS = cmd/docker cmd/dockerd+, + the binaries built and installed are +docker+ and +dockerd+. If + +FOO_BUILD_TARGETS+ contains only one target, then it is possible to + override the built and installed binary by setting +FOO_BIN_NAME+, + as above; if +FOO_BUILD_TARGETS+ contains two or more targets, then + it is not possible to override the names of the installed binaries + (use a post-install hook for that). With the Go infrastructure, all the steps required to build and install the packages are already defined, and they generally work well diff --git a/docs/manual/adding-packages-hare.adoc b/docs/manual/adding-packages-hare.adoc new file mode 100644 index 00000000000..e61d524acb3 --- /dev/null +++ b/docs/manual/adding-packages-hare.adoc @@ -0,0 +1,87 @@ +// -*- mode:doc; -*- +// vim: set syntax=asciidoc: + +=== Infrastructure for Hare packages + +[[hare-package-tutorial]] + +==== +hare-package+ tutorial + +The +Config.in+ file of Hare-based package 'hare-foo' should contain: + +---- +01: config BR2_PACKAGE_HARE_FOO +02: bool "hare-foo" +03: depends on BR2_PACKAGE_HOST_HARE_TARGET_ARCH_SUPPORTS +04: select BR2_PACKAGE_HOST_HARE +05: help +06: This is a comment that explains what foo is. +07: +08: https://foosoftware.org/foo/ +---- + +And the +.mk+ file for this package should contain: + +---- +01: ################################################################################ +02: # +03: # hare-foo +04: # +05: ################################################################################ +06: +07: HARE_FOO_VERSION = 0.42.0 +08: HARE_FOO_SITE = https://git.sr.ht/~sircmpwn/hare-foo +09: HARE_FOO_SITE_METHOD = git +10: HARE_FOO_LICENSE = MPL-2.0 +11: HARE_FOO_LICENSE_FILES = COPYING +12: HARE_FOO_INSTALL_STAGING = YES +13: +14: $(eval $(hare-package)) +---- + +The Makefile starts with the definition of the standard variables for +package declaration (lines 7 to 12). + +Finally, on line 14, we invoke the +hare-package+ +macro that generates all the Makefile rules that actually allows the +package to be built. + +[[hare-package-reference]] + +==== +hare-package+ reference + +As a policy, packages that provide Hare modules should all be +named +hare-+ in Buildroot. + +In their +Config.in+ file, packages using the +hare-package+ +infrastructure should depend on +BR2_PACKAGE_HOST_HARE_TARGET_ARCH_SUPPORTS+ +because Buildroot will automatically add a dependency on +host-hare+ +to such packages. + +The main macro of the Hare package infrastructure is +hare-package+: +like +generic-package+ it works by defining a number of variables providing +metadata information about the package, and then calling the +hare-package+ +macro. + +Just like the generic infrastructure, the Hare infrastructure works +by defining a number of variables before calling the +hare-package+ +macro. + +All the package metadata information variables that exist in the +xref:generic-package-reference[generic package infrastructure] also +exist in the Hare infrastructure. + +This infrastructure expects that the upstream package follows the +https://harelang.org/documentation/usage/project-structure.html#makefiles[project structure conventions], +because the upstream +Makefile+ is called. + +When the package contains Hare modules (ie. libraries), +there are not compiled by this BR package, +there are just installed in +$(STAGING_DIR)/usr/src/hare/third-party+, +for a future use. + +When the package produces one or more executables, +all Hare sources (from this package, from dependent modules, +from the Hare stdlib) are compiled and statically linked. +If a binding to a native library is used, +the link requires the static library, not the shared one. diff --git a/docs/manual/adding-packages-linux-kernel-spec-infra.adoc b/docs/manual/adding-packages-linux-kernel-spec-infra.adoc index 9fd3b566a59..22ffc5496fd 100644 --- a/docs/manual/adding-packages-linux-kernel-spec-infra.adoc +++ b/docs/manual/adding-packages-linux-kernel-spec-infra.adoc @@ -99,8 +99,7 @@ tree. The Buildroot's Linux kernel extensions infrastructure provides a simple solution to automatically do this, just after the kernel sources are extracted and before the kernel patches are applied. Examples of extensions packaged using this mechanism are the -real-time extensions Xenomai and RTAI, as well as the set of -out-of-tree LCD screens drivers +fbtft+. +real-time extensions Xenomai and RTAI. Let's look at an example on how to add a new Linux extension +foo+. diff --git a/docs/manual/adding-packages-qmake.adoc b/docs/manual/adding-packages-qmake.adoc index e09da166b90..1d97556abe7 100644 --- a/docs/manual/adding-packages-qmake.adoc +++ b/docs/manual/adding-packages-qmake.adoc @@ -55,6 +55,10 @@ All the package metadata information variables that exist in the xref:generic-package-reference[generic package infrastructure] also exist in the QMake infrastructure. +The Qt base package the package is built against, +qt5base+ or ++qt6base+, is automatically added to its dependencies, depending on +whether +BR2_PACKAGE_QT5+ or +BR2_PACKAGE_QT6+ is enabled. + A few additional variables, specific to the QMake infrastructure, can also be defined. diff --git a/docs/manual/adding-packages-tips.adoc b/docs/manual/adding-packages-tips.adoc index c243e7b75ba..57ca11ab5de 100644 --- a/docs/manual/adding-packages-tips.adoc +++ b/docs/manual/adding-packages-tips.adoc @@ -85,7 +85,7 @@ under various conditions: does it build for all architectures? Does it build with the different C libraries? Does it need threads, NPTL? And so on... -Buildroot runs http://autobuild.buildroot.org/[autobuilders] which +Buildroot runs https://autobuild.buildroot.org/[autobuilders] which continuously test random configurations. However, these only build the `master` branch of the git tree, and your new fancy package is not yet there. diff --git a/docs/manual/adding-packages.adoc b/docs/manual/adding-packages.adoc index 10acae0b1af..2c66d88f37e 100644 --- a/docs/manual/adding-packages.adoc +++ b/docs/manual/adding-packages.adoc @@ -43,6 +43,8 @@ include::adding-packages-golang.adoc[] include::adding-packages-qmake.adoc[] +include::adding-packages-hare.adoc[] + include::adding-packages-kernel-module.adoc[] include::adding-packages-asciidoc.adoc[] diff --git a/docs/manual/common-usage.adoc b/docs/manual/common-usage.adoc index 43caa3a9bc8..67c3e06567c 100644 --- a/docs/manual/common-usage.adoc +++ b/docs/manual/common-usage.adoc @@ -170,6 +170,18 @@ by using the +show-info+ make target: make show-info ---- +Buildroot can also produce information in the +show-info+ format about all +packages regardless of the configuration or architecture by using ++show-info-all+. +This is used for maintenance tasks that require information about every +package in the tree, such as generating a full-tree SBOM for +https://security.buildroot.org[]. +It does not require a +.config+ file: + +---- +make show-info-all +---- + Buildroot can also produce details about packages as HTML and JSON output using the +pkg-stats+ make target. Amongst other things, these details include whether known CVEs (security vulnerabilities) affect @@ -180,6 +192,34 @@ a newer upstream version for those packages. make pkg-stats ---- +=== Generating CycloneDX SBOM + +Based on the output of +show-info+ Buildroot can generate a SBOM in +the CycloneDX format. While it doesn't offer any additional +information, CycloneDX is a format specification that can be consumed +by other projects. + +---- +make show-info | utils/generate-cyclonedx +---- + +For more information check the help of the +generate-cyclonedx+ script, the +script call can be tailored to your project. + +---- +utils/generate-cyclonedx --help +---- + +Similarly to +pkg-stats+, CycloneDX SBOM's can be enriched with vulnerability +analysis from the NVD database. + +---- +make show-info | utils/generate-cyclonedx > sbom.cdx.json +cat sbom.cdx.json | support/scripts/cve-check --nvd-path dl/buildroot-nvd/ +---- + +For more information about CycloneDX see https://cyclonedx.org/[]. + === Graphing the dependencies between packages [[graph-depends]] diff --git a/docs/manual/contribute.adoc b/docs/manual/contribute.adoc index ffaff6f857b..6ac75fb66aa 100644 --- a/docs/manual/contribute.adoc +++ b/docs/manual/contribute.adoc @@ -40,8 +40,8 @@ with a random selection of packages. With the large commit activity on Buildroot, these autobuilders are a great help in detecting problems very early after commit. -All build results are available at http://autobuild.buildroot.org[], -statistics are at http://autobuild.buildroot.org/stats.php[]. Every day, +All build results are available at https://autobuild.buildroot.org[], +statistics are at https://autobuild.buildroot.org/stats.php[]. Every day, an overview of all failed packages is sent to the mailing list. Detecting problems is great, but obviously these problems have to be @@ -58,7 +58,7 @@ basically two things that can be done: these steps: . Check if you can reproduce the problem by building with the same configuration. You can do this manually, or use the - http://git.buildroot.org/buildroot-test/tree/utils/br-reproduce-build[br-reproduce-build] + https://gitlab.com/buildroot.org/buildroot-test/-/blob/master/utils/br-reproduce-build[br-reproduce-build] script that will automatically clone a Buildroot git repository, checkout the correct revision, download and set the right configuration, and start the build. @@ -73,7 +73,7 @@ basically two things that can be done: In the commit message of a patch fixing an autobuild failure, add a reference to the build result directory, as follows: ---- -Fixes: http://autobuild.buildroot.org/results/51000a9d4656afe9e0ea6f07b9f8ed374c2e4069 +Fixes: https://autobuild.buildroot.org/results/51000a9d4656afe9e0ea6f07b9f8ed374c2e4069 ---- === Reviewing and testing patches @@ -283,16 +283,18 @@ the commit message body. When you bump a package to a new version, you should also submit a separate patch for each package. Don't forget to update the +.hash+ file, or add it if it doesn't exist yet. Also don't forget to check if -the +_LICENSE+ and +_LICENSE_FILES+ are still valid. The summary line -should be something like +: bump to version +. If the new version only contains security updates compared -to the existing one, the summary should be +: security -bump to version + and the commit message body should show -the CVE numbers that are fixed. If some package patches can be removed -in the new version, it should be explained explicitly why they can be -removed, preferably with the upstream commit ID. Also any other -required changes should be explained explicitly, like configure -options that no longer exist or are no longer needed. +the +_LICENSE+ and +_LICENSE_FILES+ are still valid. If the hash of a +license file changed, please include a note in the commit message +about what changed, ideally with a link to the upstream commit. The +summary line should be something like +: bump to version ++. If the new version only contains security updates +compared to the existing one, the summary should be +: +security bump to version + and the commit message body +should show the CVE numbers that are fixed. If some package patches +can be removed in the new version, it should be explained explicitly +why they can be removed, preferably with the upstream commit ID. Also +any other required changes should be explained explicitly, like +configure options that no longer exist or are no longer needed. If you are interested in getting notified of build failures and of further changes in the packages you added or modified, please add @@ -321,9 +323,12 @@ Now check the coding style for the changes you committed: $ utils/docker-run make check-package ---- -Now, you are ready to generate then submit your patch set. +This command (unlike calling +utils/check-package+ directly) will also warn +about any stale entries in the +.checkpackageignore+ file that your patches +might have resolved. If this is the case, make sure to remove those lines +from +.checkpackageignore+ as well. -To generate it, run: +Now, you are ready to generate then submit your patch set. To generate it, run: ---- $ git format-patch -M -n -s -o outgoing origin/master @@ -375,6 +380,9 @@ $ git send-email origin/master Note that +git+ should be configured to use your mail account. To configure +git+, see +man git-send-email+ or https://git-send-email.io/. +The mail account used has to be subscribed to the mailing list, +otherwise your message will be automatically rejected. + If you do not use +git send-email+, make sure posted *patches are not line-wrapped*, otherwise they cannot easily be applied. In such a case, fix your e-mail client, or better yet, learn to use +git send-email+. @@ -455,7 +463,7 @@ editing the commit message. Below the +Signed-off-by+ section, add Although the changelog will be visible for the reviewers in the mail thread, as well as in -https://patchwork.ozlabs.org/project/buildroot/list/[patchwork], +git+ +https://patchwork.buildroot.org/project/buildroot/list/[patchwork], +git+ will automatically ignores lines below +---+ when the patch will be merged. This is the intended behavior: the changelog is not meant to be preserved forever in the +git+ history of the project. @@ -508,19 +516,19 @@ $ git format-patch -v4 -M -s -o outgoing origin/master When you provide a new version of a patch, please mark the old one as superseded in -https://patchwork.ozlabs.org/project/buildroot/list/[patchwork]. You +https://patchwork.buildroot.org/project/buildroot/list/[patchwork]. You need to create an account on -https://patchwork.ozlabs.org/project/buildroot/list/[patchwork] to be +https://patchwork.buildroot.org/project/buildroot/list/[patchwork] to be able to modify the status of your patches. Note that you can only change the status of patches you submitted yourself, which means the email address you register in -https://patchwork.ozlabs.org/project/buildroot/list/[patchwork] should +https://patchwork.buildroot.org/project/buildroot/list/[patchwork] should match the one you use for sending patches to the mailing list. You can also add the +--in-reply-to=+ option when submitting a patch to the mailing list. The id of the mail to reply to can be found under the "Message Id" tag on -https://patchwork.ozlabs.org/project/buildroot/list/[patchwork]. The +https://patchwork.buildroot.org/project/buildroot/list/[patchwork]. The advantage of *in-reply-to* is that patchwork will automatically mark the previous version of the patch as superseded. @@ -556,8 +564,9 @@ If some of these details are too large, do not hesitate to use a pastebin service. Note that not all available pastebin services will preserve Unix-style line terminators when downloading raw pastes. Following pastebin services are known to work correctly: + - https://gist.github.com/ -- http://code.bulix.org/ +- https://paste.sr.ht/ === Using the runtime tests framework @@ -658,7 +667,7 @@ Creating a basic test case involves: advantage of using +infra.basetest.BASIC_TOOLCHAIN_CONFIG+ is that a matching Linux kernel image is provided, which allows to boot the resulting image in Qemu without having to build a Linux kernel image - as part of the test case, therefore significant decreasing the build + as part of the test case, therefore significantly decreasing the build time required for the test case. * Implementing a +def test_run(self):+ function to implement the diff --git a/docs/manual/customize-directory-structure.adoc b/docs/manual/customize-directory-structure.adoc index b4b5d50e1a3..aab225811b0 100644 --- a/docs/manual/customize-directory-structure.adoc +++ b/docs/manual/customize-directory-structure.adoc @@ -23,8 +23,8 @@ to you. | +-- linux.config | +-- busybox.config | +-- -| +-- post_build.sh -| +-- post_image.sh +| +-- post-build.sh +| +-- post-image.sh | +-- rootfs_overlay/ | | +-- etc/ | | +-- @@ -84,7 +84,7 @@ layers 'common' and 'fooboard' is: +-- board/ +-- / +-- common/ - | +-- post_build.sh + | +-- post-build.sh | +-- rootfs_overlay/ | | +-- ... | +-- patches/ @@ -94,7 +94,7 @@ layers 'common' and 'fooboard' is: +-- linux.config +-- busybox.config +-- - +-- post_build.sh + +-- post-build.sh +-- rootfs_overlay/ | +-- ... +-- patches/ diff --git a/docs/manual/customize-outside-br.adoc b/docs/manual/customize-outside-br.adoc index 78065489d46..8a76f3a9987 100644 --- a/docs/manual/customize-outside-br.adoc +++ b/docs/manual/customize-outside-br.adoc @@ -58,10 +58,11 @@ We can switch to another br2-external tree at any time: buildroot/ $ make BR2_EXTERNAL=/where/we/have/bar xconfig ---- -We can also use multiple br2-external trees: +We can also use multiple br2-external trees, by specifying a space-separated +list of paths to use: ---- -buildroot/ $ make BR2_EXTERNAL=/path/to/foo:/where/we/have/bar menuconfig +buildroot/ $ make BR2_EXTERNAL="/path/to/foo /where/we/have/bar" menuconfig ---- Or disable the usage of any br2-external tree: diff --git a/docs/manual/customize-quick-guide.adoc b/docs/manual/customize-quick-guide.adoc index 315027c5901..360cbe9622f 100644 --- a/docs/manual/customize-quick-guide.adoc +++ b/docs/manual/customize-quick-guide.adoc @@ -35,9 +35,9 @@ your project can be skipped. Set +BR2_ROOTFS_OVERLAY+ to +board///rootfs-overlay+. . Create a post-build script - +board///post_build.sh+. Set + +board///post-build.sh+. Set +BR2_ROOTFS_POST_BUILD_SCRIPT+ to - +board///post_build.sh+ + +board///post-build.sh+ . If additional setuid permissions have to be set or device nodes have to be created, create +board///device_table.txt+ and add that path to +BR2_ROOTFS_DEVICE_TABLE+. diff --git a/docs/manual/customize-rootfs.adoc b/docs/manual/customize-rootfs.adoc index d334093748a..b7fe5813f74 100644 --- a/docs/manual/customize-rootfs.adoc +++ b/docs/manual/customize-rootfs.adoc @@ -28,6 +28,11 @@ When +BR2_ROOTFS_MERGED_USR+ is enabled, then the overlay must not such a situation, should the overlay have any programs or libraries, they should be placed in '/usr/bin', '/usr/sbin' and '/usr/lib'. + +Additionally, when +BR2_ROOTFS_MERGED_BIN+ is enabled, then the overlay + must not contain the '/usr/sbin' directory, as Buildroot will create + it as a symbolic link to '/usr/bin'. In such a situation, should the + overlay have any programs, they should be placed in '/usr/bin'. ++ As shown in xref:customize-dir-structure[], the recommended path for this overlay is +board///rootfs-overlay+. @@ -47,7 +52,7 @@ Using post-build scripts, you can remove or modify any file in your post-build cleanup scripts. + As shown in xref:customize-dir-structure[], the recommended path for - this script is +board///post_build.sh+. + this script is +board///post-build.sh+. + The post-build scripts are run with the main Buildroot tree as current working directory. The path to the target filesystem is passed as the diff --git a/docs/manual/getting.adoc b/docs/manual/getting.adoc index 51c97d57931..4b5eae0150d 100644 --- a/docs/manual/getting.adoc +++ b/docs/manual/getting.adoc @@ -8,21 +8,21 @@ Buildroot releases are made every 3 months, in February, May, August and November. Release numbers are in the format YYYY.MM, so for example 2013.02, 2014.08. -Release tarballs are available at http://buildroot.org/downloads/[]. +Release tarballs are available at https://buildroot.org/downloads/[]. For your convenience, a https://www.vagrantup.com/[Vagrantfile] is available in `support/misc/Vagrantfile` in the Buildroot source tree to quickly set up a virtual machine with the needed dependencies to get started. -If you want to setup an isolated buildroot environment on Linux or Mac -Os X, paste this line onto your terminal: +If you want to set up an isolated Buildroot environment on Linux or Mac +OS X, paste this line into your terminal: ---- curl -O https://buildroot.org/downloads/Vagrantfile; vagrant up ---- -If you are on Windows, paste this into your powershell: +If you are on Windows, paste this into your PowerShell: ---- (new-object System.Net.WebClient).DownloadFile( @@ -32,5 +32,5 @@ vagrant up If you want to follow development, you can use the daily snapshots or make a clone of the Git repository. Refer to the -http://buildroot.org/download[Download page] of the Buildroot website +https://buildroot.org/download.html[Download page] of the Buildroot website for more details. diff --git a/docs/manual/introduction.adoc b/docs/manual/introduction.adoc index 476aa81edc4..1a8cc6d13ed 100644 --- a/docs/manual/introduction.adoc +++ b/docs/manual/introduction.adoc @@ -16,11 +16,11 @@ filesystem with Buildroot). Buildroot is useful mainly for people working with embedded systems. Embedded systems often use processors that are not the regular x86 -processors everyone is used to having in his PC. They can be PowerPC -processors, MIPS processors, ARM processors, etc. +processors developers are used to having in their PCs, including +ARM (both 32- and 64-bit), MIPS, PowerPC, RISC-V and more. Buildroot supports numerous processors and their variants; it also -comes with default configurations for several boards available +comes with default configurations for hundreds of boards available off-the-shelf. Besides this, a number of third-party projects are based on, or develop their BSP footnote:[BSP: Board Support Package] or SDK footnote:[SDK: Software Development Kit] on top of Buildroot. diff --git a/docs/manual/manual.adoc b/docs/manual/manual.adoc index cfcc3e52a9e..06827361366 100644 --- a/docs/manual/manual.adoc +++ b/docs/manual/manual.adoc @@ -9,7 +9,7 @@ Buildroot {sys:echo $BR2_VERSION} manual generated on {localdate} The Buildroot manual is written by the Buildroot developers. It is licensed under the GNU General Public License, version 2. Refer to the -http://git.buildroot.org/buildroot/tree/COPYING?id={sys:git rev-parse HEAD}[COPYING] +https://gitlab.com/buildroot.org/buildroot/-/blob/master/COPYING[COPYING] file in the Buildroot sources for the full text of this license. Copyright (C) The Buildroot developers diff --git a/docs/manual/migrating.adoc b/docs/manual/migrating.adoc index 4e6225a987e..86b040a19ca 100644 --- a/docs/manual/migrating.adoc +++ b/docs/manual/migrating.adoc @@ -222,3 +222,51 @@ from +-cargo2+ to +-cargo4+. In 2025.08, starting with systemd version 257, systemd-networkd requires kernel 5.4 or later. If you are still using a kernel older than 5.4, please update your kernel or use an alternative network manager. + +[[migrating-golang-packages]] +=== Migrating to 2025.11 +In 2025.11, the +FOO_INSTALL_BINS+ variable for golang packages is no longer +supported; the list of binaries to install is automatically derived from +the +FOO_BUILD_TARGETS+ variable. + +[[migrating-js-libs]] +=== Migration to 2026.02 + +Starting 2025.08, JavaScript libraries that were just copied to `/var/www` on +the target filesystem are not part of the Buildroot packages. +If you want to provide such libraries either: + +- Use a CDN to target the library version of your choice. +- Serve it by adding the package to your external and installing the content to + the destination of your choice +- Serve it by adding the library to your overlay. +- Install the libraries from your project with NPM and bundle with a JavaScript + bundler. + +In 2026.02, the network-manager package stopped selecting the gnutls package as +a cryptography backend automatically. Manually enable the gnutls or libnss +package if you require features that depend on a cryptography backend, such as +certificate-based authentication. + +[[migrating-to-2026-08]] +=== Migration to 2026.08 + +In 2026.08, the iwd package stopped installing a custom ++/etc/iwd/main.conf+, and started using the upstream example +instead. With that the +EnableNetworkConfiguration+ setting changed +from +true+ to +false+, in line with upstream defaults. If you need ++EnableNetworkConfiguration=true+ to let +iwd+ handle network +configuration for active wifi connections, adjust +/etc/iwd/main.conf+ +in your build (see xref:rootfs-custom[] for options). + +Due to the update of Rust to a version greater than 1.96.1 $comment was +added to .cargo-checksum.json to clarify that this file is not a +security mechanism. Tarballs generated by Cargo-fetched packages have +changed, therefore the suffix of such tarballs has been changed from ++-cargo5+ to +-cargo6+. + +[[migrating-to-2026-11]] +=== Migration to 2026.11 + +Due to the update of Dovecot to version 2.4.x the runtime configuration +files need to be updated. diff --git a/docs/manual/patch-policy.adoc b/docs/manual/patch-policy.adoc index a4bc5f391ab..02051f2f0ee 100644 --- a/docs/manual/patch-policy.adoc +++ b/docs/manual/patch-policy.adoc @@ -144,6 +144,7 @@ AC_PROG_MAKE_SET +AM_CONDITIONAL([CXX_WORKS], [test "x$rw_cv_prog_cxx_works" = "xyes"]) ---- +[[additional-patch-documentation]] === Additional patch documentation Ideally, all patches should document an upstream patch or patch submission, when @@ -177,4 +178,14 @@ Upstream: N/A ---- Adding this documentation helps streamline the patch review process during -package version updates. \ No newline at end of file +package version updates. + +If the patch addresses one or multiple vulnerabilities, list each identifier on +a separate line with a +CVE+ trailer. + +---- +CVE: +---- + +If multiple patches address the same vulnerability, reference the vulnerability +in every patch. diff --git a/docs/manual/release-engineering.adoc b/docs/manual/release-engineering.adoc index 0cf38183f90..cbd310d6823 100644 --- a/docs/manual/release-engineering.adoc +++ b/docs/manual/release-engineering.adoc @@ -5,19 +5,21 @@ == Release Engineering === Releases -The Buildroot project makes quarterly releases with monthly bugfix -releases. The first release of each year is a long term support -release, LTS. +The Buildroot project makes quarterly stable releases with monthly bugfix +releases. Starting with 2025.02, the first release of every odd-numbered year +is a long-term support (LTS) release supported for three years. - - Quarterly releases: 2020.02, 2020.05, 2020.08, and 2020.11 - - Bugfix releases: 2020.02.1, 2020.02.2, ... - - LTS releases: 2020.02, 2021.02, ... + - LTS releases: 2025.02, 2027.02, 2029.02 ... + - Non-LTS releases: 2025.05, 2025.08, 2025.11, 2026.02, ... + - Bugfix releases: 2025.02.1, 2025.02.2, ... -Releases are supported until the first bugfix release of the next -release, e.g., 2020.05.x is EOL when 2020.08.1 is released. +LTS releases are supported for three years, with a one-year overlap with the +next LTS release, e.g., 2025.02.x is EOL when 2028.02 is released. -LTS releases are supported until the first bugfix release of the next -LTS, e.g., 2020.02.x is supported until 2021.02.1 is released. +Non-LTS releases are supported until the next release, e.g., 2025.05.x is EOL +when 2025.08 is released. + +See the table at https://lts.buildroot.org/#releases[lts.buildroot.org]. === Development diff --git a/docs/manual/resources.adoc b/docs/manual/resources.adoc index 4ef709c317b..331929e0c67 100644 --- a/docs/manual/resources.adoc +++ b/docs/manual/resources.adoc @@ -17,12 +17,12 @@ main method of interaction for Buildroot users and developers. + Only subscribers to the Buildroot mailing list are allowed to post to this list. You can subscribe via the -http://lists.buildroot.org/mailman/listinfo/buildroot[mailing list info +https://lists.buildroot.org/mailman/listinfo/buildroot[mailing list info page]. + Mails that are sent to the mailing list are also available in the mailing list archives, available through -http://lists.buildroot.org/pipermail/buildroot[Mailman] or at +https://lists.buildroot.org/pipermail/buildroot[Mailman] or at https://lore.kernel.org/buildroot/[lore.kernel.org]. IRC:: @@ -68,4 +68,4 @@ review comments in a clean and concise web interface, it can be useful for all Buildroot developers. + The Buildroot patch management interface is available at -https://patchwork.ozlabs.org/project/buildroot/list/[]. +https://patchwork.buildroot.org/project/buildroot/list/[]. diff --git a/docs/manual/writing-rules.adoc b/docs/manual/writing-rules.adoc index 03e4f2c61cf..1e3e9e1c9f7 100644 --- a/docs/manual/writing-rules.adoc +++ b/docs/manual/writing-rules.adoc @@ -141,9 +141,9 @@ endif === The +genimage.cfg+ file +genimage.cfg+ files contain the output image layout that genimage utility -uses to create final .img file. - -An example follows: +uses to create final .img file. See the +https://github.com/pengutronix/genimage/blob/master/README.rst[upstream +documentation] for details. In Buildroot it is formatted as follows. ---- image efi-part.vfat { @@ -198,22 +198,30 @@ image sdimage.img { chance, the byte count. In comments instead use +GB+, +MB+, +KB+ (not +kb+) in place of +G+, +M+, +K+. -* For GPT partitions, the +partition-type-uuid+ value must be +U+ for - the EFI System Partition (expanded to - +c12a7328-f81f-11d2-ba4b-00a0c93ec93b+ by _genimage_), +F+ for a FAT - partition (expanded to +ebd0a0a2-b9e5-4433-87c0-68b6b72699c7+ by - _genimage_) or +L+ for the root filesystem or other filesystems - (expanded to +0fc63daf-8483-4772-8e79-3d69d8477de4+ by - _genimage_). Even though +L+ is the default value of _genimage_, we - prefer to have it explicitly specified in our +genimage.cfg+ - files. Finally, these shortcuts should be used without double - quotes, e.g +partition-type-uuid = U+. If an explicit GUID is - specified, lower-case letters should be used. - -The +genimage.cfg+ files are the input for the genimage tool used in -Buildroot to generate the final image file(i.e. sdcard.img). For further -details about the _genimage_ language, refer to -https://github.com/pengutronix/genimage/blob/master/README.rst[]. +* Every +partition+ of a GPT image (e.g. +partition-table-type = gpt+) must + explicitly set +partition-type-uuid+. It must not be double-quoted. Buildroot + follows the + https://uapi-group.org/specifications/specs/discoverable_partitions_specification/[UAPI + Discoverable Partitions Specification] whenever possible. This means that the + partitions define a specific +partition-type-uuid+ depending on the intended + mountpoint. + + + _genimage_ provides + https://github.com/pengutronix/genimage/?tab=readme-ov-file#the-image-section[shortcuts + for many of the partition types in the Discoverable Partitions Specification], + and these shortcuts must be used whenever possible. If a GUID shortcut is not + supported by _genimage_, the full GUID must be written in lower-case letters. + Some common shortcuts are as follows: + +** +U+ for the EFI System Partition (expanded to + +c12a7328-f81f-11d2-ba4b-00a0c93ec93b+ by _genimage_). + +** +root-\{arch\}+ for the root filesystem partition, where +\{arch\}+ is the + system architecture (for example +root-x86+, +root-x86-64+, +root-arm+, or + +root-arm64+). + +** +L+ for other Linux filesystem partitions (expanded to + +0fc63daf-8483-4772-8e79-3d69d8477de4+ by _genimage_). === The documentation diff --git a/docs/website/contribute.html b/docs/website/contribute.html index 52c30d60d32..8da371cf01a 100644 --- a/docs/website/contribute.html +++ b/docs/website/contribute.html @@ -14,22 +14,22 @@

For more details on these topics, check out the - + Contributing to buildroot chapter in the Buildroot manual. Thanks for your help!

If you need any support yourself, have a look at @@ -51,7 +51,7 @@ to organise those.

  • Practical help: providing a meeting room for developer meetings, providing autobuilder instances, etc.
    • -
  • Buildroot LTS Sponsoring, +
  • Buildroot LTS Sponsoring, a specific effort to finance the maintenance of the Long Term Support branch of Buildroot.
    • diff --git a/docs/website/css/lts.css b/docs/website/css/lts.css new file mode 100644 index 00000000000..c1e9b198a8c --- /dev/null +++ b/docs/website/css/lts.css @@ -0,0 +1,410 @@ +@font-face { + font-family: "Compagnon Light"; + src: url("/fonts/compagnon-light.woff") format("woff"); + font-weight: 300; + font-style: normal; + font-display: swap; +} + +@font-face { + font-family: "Terminal Grotesque"; + src: url("/fonts/terminal-grotesque.woff") format("woff"); + font-weight: normal; + font-style: normal; + font-display: swap; +} + +:root { + --br-blue: #2b7de0; + --br-grid: #dceeff; + --br-yellow: #dcb045; + --font-pixel: "Terminal Grotesque", sans-serif; + --font-serif: "Compagnon Light", serif; + --br-grid-size: 40px; +} + +@keyframes slideDownFade { + 0% { + opacity: 0; + transform: translateY(-30px); + } + 100% { + opacity: 1; + transform: translateY(0); + } +} + +@keyframes growBar { + from { transform: scaleX(0); opacity: 0.5; } + to { transform: scaleX(1); opacity: 1; } +} + +/** + * Header with the grid pattern background used by the Buildroot LTS + * graphical chart + */ +.br-lts-header { + margin-top: 50px; + position: relative; + width: 100%; + min-height: 400px; + background-color: #ffffff; + overflow: hidden; + border-bottom: 4px solid var(--br-blue); + display: flex; + justify-content: center; + padding: 40px 20px; +} + +.br-lts-header-bg { + position: absolute; + top: 0; + left: 0; + width: 100%; + height: 100%; + background-image: + linear-gradient(var(--br-grid) 2px, transparent 2px), + linear-gradient(90deg, var(--br-grid) 2px, transparent 2px); + background-size: 120px 120px; + z-index: 1; + pointer-events: none; +} + +.br-lts-header-content { + position: relative; + z-index: 10; + max-width: 1200px; + display: flex; + flex-direction: column; +} + +.br-lts-header-title { + color: var(--br-blue); + font-family: var(--font-pixel); + font-size: 8rem; + display: inline-block; + background: white; + padding: 10px; + margin: 10px; + border: 2px solid var(--br-blue); + box-shadow: 6px 6px 0 var(--br-blue); + + transition: all 0.3s cubic-bezier(0.25, 0.8, 0.25, 1); + opacity: 0; + animation: slideDownFade 0.8s cubic-bezier(0.34, 1.56, 0.64, 1) forwards; +} + +.br-lts-header-title:nth-of-type(2) { + font-size: 6rem; + line-height: 6rem; + animation-delay: 0.2s; +} + +.br-lts-header-title:hover { + background-color: var(--br-blue); + color: #ffffff; + box-shadow: 8px 8px 0 var(--br-grid); + transform: translateY(-2px) translateX(-2px); +} + +/** + *
    wrapper. + */ +.br-lts-main { + max-width: 1200px; + margin: 40px auto; + padding: 0 20px; +} + +/** + * Custom dotted separator using the BR-LTS theme. + */ +.br-lts-separator { + width: 100%; + max-width: 900px; + height: 10px; + border-bottom: 2px dotted var(--br-blue); + margin: 10px 0; +} + +/** + * Intersection subtitle
    with grid background + */ +.br-lts-section-header { + position: relative; + width: 40%; + height: calc(var(--br-grid-size) * 3); + background-color: #fff; + display: flex; + align-items: center; + padding-left: var(--br-grid-size); + margin: var(--br-grid-size) 0; + border: 2px solid var(--br-grid); + + text-decoration: none; + scroll-margin-top: 20px; /* Offset for jump to anchor */ +} + +@media screen and (max-width: 768px) { + .br-lts-section-header { + width: 100%; + } +} + +.br-lts-section-header:hover { + border: 2px solid var(--br-blue); + box-shadow: 6px 6px 0 var(--br-blue); + transition: border-color 0.3s ease, box-shadow 0.3s ease; +} + +.br-lts-section-header .br-lts-bg-grid { + position: absolute; + top: 0; + left: 0; + width: 100%; + height: 100%; + background-image: + linear-gradient(var(--br-grid) 2px, transparent 2px), + linear-gradient(90deg, var(--br-grid) 2px, transparent 2px); + background-size: var(--br-grid-size) var(--br-grid-size); + background-position: -1px -1px; + z-index: 1; + pointer-events: none; +} + +.br-lts-section-header .br-lts-title-box { + position: relative; + z-index: 10; + background-color: #fff; + border: 2px solid var(--br-blue); + color: var(--br-blue); + font-family: var(--font-pixel); + font-weight: 400; + font-style: normal; + font-size: 24px; + line-height: 1; + padding: 10px 15px; +} + +.br-lts-section-header .br-lts-decoration-dot { + position: absolute; + z-index: 10; + width: 10px; + height: 10px; + background-color: var(--br-yellow); + border-radius: 50%; + bottom: 0; + left: 0; + transform: translate(-50%, 50%); +} + +/** + * Numbered titled list. + * The number is spanning on the left. + * The content is on this right. + */ +.br-lts-item-row { + display: flex; + gap: 25px; + max-width: 900px; + position: relative; +} + +.br-lts-item-number { + font-family: var(--font-pixel); + color: var(--br-yellow); + font-size: 160px; + line-height: 0.8; + flex-shrink: 0; + user-select: none; + margin-top: 20px; + text-align: center; + width: 60px; +} + +.br-lts-item-content { + display: flex; + flex-direction: column; + gap: 15px; + padding-top: 5px; +} + +.br-lts-item-title { + font-family: var(--font-serif); + font-style: italic; + font-weight: 300; + font-size: 42px; + line-height: 1.1; + color: var(--br-blue); + letter-spacing: 1px; +} + +.br-lts-item-text { + font-family: var(--font-mono); + font-size: 16px; + line-height: 1.4; + color: #333; + max-width: 750px; +} + +/** + * 'timeline' grid to represent how tasks are expanding across time. + */ +.br-lts-chart { + display: grid; + grid-template-columns: 120px repeat(12, 1fr); + gap: 0; + width: 100%; + max-width: 1000px; + background-color: #fff; + border: 2px solid var(--br-blue); + box-shadow: 6px 6px 0 var(--br-blue); + position: relative; + overflow-x: auto; +} + +.br-lts-chart::before { + content: ""; + position: absolute; + top: 45px; + left: 120px; + right: 0; + bottom: 0; + background-size: calc(100% / 12) 100%; + z-index: 0; + pointer-events: none; +} + +.br-lts-chart-head { + grid-column: 1 / -1; + display: grid; + grid-template-columns: 120px repeat(12, 1fr); + border-bottom: 2px solid var(--br-blue); + background-color: color-mix(in srgb, var(--br-blue) 6%, white); + font-weight: bold; + position: relative; + z-index: 2; +} + +.br-lts-chart-head-label { + text-align: center; + padding: 10px; + border-left: 2px solid var(--br-grid); + font-family: var(--font-pixel); + font-size: 20px; + color: var(--br-blue); +} + +.br-lts-span-year { grid-column: span 4; } +.br-lts-span-day { grid-column: span 2; } +.br-lts-head-spacer { grid-column: span 1; border-right: 2px solid var(--br-blue); } + +.br-lts-chart-row { + grid-column: 1 / -1; + display: grid; + grid-template-columns: 120px repeat(12, 1fr); + align-items: center; + height: 50px; + border-bottom: 1px dashed #ddd; + position: relative; + z-index: 1; + transition: background-color 0.2s ease; +} + +.br-lts-chart-row:last-child { border-bottom: none; } + +.br-lts-chart-row--tall { + height: 100px; +} + +.br-lts-chart-row--faded { + color: #999; + font-style: italic; +} + +.br-lts-chart-row:hover { + background-color: color-mix(in srgb, var(--br-blue) 8%, transparent); + z-index: 2; +} + +.br-lts-chart-label { + padding: 0 15px; + font-weight: bold; + color: #555; + border-right: 2px solid var(--br-blue); + height: 100%; + display: flex; + align-items: center; + background-color: #fff; + font-size: 14px; + transition: color 0.2s ease, background-color 0.2s ease; +} + +.br-lts-chart-row:hover .br-lts-chart-label { + background-color: transparent; + color: var(--br-blue); +} + +.br-lts-bar { + height: 24px; + border-radius: 4px; + display: flex; + align-items: center; + padding-left: 10px; + font-size: 12px; + color: white; + font-weight: bold; + box-shadow: 2px 2px 0 rgba(0,0,0,0.1); + white-space: nowrap; + overflow: hidden; + position: relative; + background-color: var(--br-blue); + grid-column-end: span 1; + cursor: default; + + transform-origin: left center; + animation: growBar 0.8s cubic-bezier(0.16, 1, 0.3, 1) forwards; + opacity: 0; + + transition: transform 0.2s cubic-bezier(0.175, 0.885, 0.32, 1.275), + box-shadow 0.2s ease, + filter 0.2s ease; +} + +.br-lts-chart-row:nth-child(2) .br-lts-bar { animation-delay: 100ms; } +.br-lts-chart-row:nth-child(3) .br-lts-bar { animation-delay: 200ms; } +.br-lts-chart-row:nth-child(4) .br-lts-bar { animation-delay: 300ms; } +.br-lts-chart-row:nth-child(5) .br-lts-bar { animation-delay: 400ms; } +.br-lts-chart-row:nth-child(6) .br-lts-bar { animation-delay: 500ms; } +.br-lts-chart-row:nth-child(7) .br-lts-bar { animation-delay: 600ms; } +.br-lts-chart-row:nth-child(8) .br-lts-bar { animation-delay: 700ms; } +.br-lts-chart-row:nth-child(9) .br-lts-bar { animation-delay: 800ms; } +.br-lts-chart-row:nth-child(10) .br-lts-bar { animation-delay: 900ms; } +.br-lts-chart-row:nth-child(11) .br-lts-bar { animation-delay: 1000ms; } + +.br-lts-bar:hover { + transform: scale(1.05) translateY(-2px); + box-shadow: 4px 6px 12px rgba(0,0,0,0.2); + z-index: 10; + filter: brightness(1.1); +} + +.br-lts-bar--long { + background-color: var(--br-yellow); + color: color-mix(in srgb, var(--br-yellow), black 45%); + grid-column-end: span 12; + border: 2px solid color-mix(in srgb, var(--br-yellow), white 20%); +} + +.br-lts-bar--span-2 { grid-column-end: span 2; } +.br-lts-bar--span-6 { grid-column-end: span 6; } + +.br-lts-col-start-2 { grid-column-start: 2; } +.br-lts-col-start-3 { grid-column-start: 3; } +.br-lts-col-start-4 { grid-column-start: 4; } +.br-lts-col-start-5 { grid-column-start: 5; } +.br-lts-col-start-6 { grid-column-start: 6; } +.br-lts-col-start-7 { grid-column-start: 7; } +.br-lts-col-start-8 { grid-column-start: 8; } +.br-lts-col-start-9 { grid-column-start: 9; } +.br-lts-col-start-10 { grid-column-start: 10; } diff --git a/docs/website/css/sponsors.css b/docs/website/css/sponsors.css new file mode 100644 index 00000000000..889737eabda --- /dev/null +++ b/docs/website/css/sponsors.css @@ -0,0 +1,40 @@ +.sponsors-container { + display: flex; + flex-wrap: wrap; + gap: 15px; + align-items: stretch; +} + +.sponsor-entry { + flex: 0 0 calc(33.333% - 10px); + display: flex; + flex-direction: column; + min-width: 250px; +} + +.sponsor-entry .panel { + flex: 1; + display: flex; + flex-direction: column; +} + +.sponsor-entry .panel-body { + flex: 1; + display: flex; + flex-direction: column; +} + +.sponsor-title { + display: flex; + align-items: center; + justify-content: center; + min-height: 150px; +} + +.sponsor-title img { + max-height: 120px; +} + +.sponsor-body { + flex: 1; +} diff --git a/docs/website/download.html b/docs/website/download.html index ee466e3d858..3089b1ad035 100644 --- a/docs/website/download.html +++ b/docs/website/download.html @@ -7,111 +7,125 @@
    Download
    - -

    Latest long term support release: 2025.02.5

    - -
    -
    -
    -
    -
    - -
    -
    - -
    -
    -
    -

    buildroot-2025.02.5.tar.gz

    -

    PGP signature

    -
    -
    -
    -
    -
    - -
    -
    - -
    -
    -
    - -

    buildroot-2025.02.5.tar.xz

    -

    PGP signature

    -
    -
    - -

    Latest stable release: 2025.05.1

    - -
    -
    -
    -
    -
    - -
    -
    - -
    -
    -
    -

    buildroot-2025.05.1.tar.gz

    -

    PGP signature

    -
    -
    -
    -
    -
    - -
    -
    - -
    -
    -
    - -

    buildroot-2025.05.1.tar.xz

    -

    PGP signature

    -
    -
    - -

    Latest release candidate: 2025.08-rc3

    -
    -
    -
    -
    -
    - -
    -
    - -
    -
    -
    - -

    buildroot-2025.08-rc3.tar.gz

    -

    PGP signature

    -
    -
    -
    -
    -
    - -
    -
    - -
    -
    -
    - -

    buildroot-2025.08-rc3.tar.xz

    -

    PGP signature

    -
    -
    + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
    SeriesEnd of LifeLatest releaseLatest release dateDownloads +
    Stable2026.08.1.xDecember 2026 + 2026.08.1
    + + Changelog + +     		2026-10-22 + + + .tar.gz +
    + [PGP sig] +     		+ + + .tar.xz +
    + [PGP sig] +
    Old stable2026.05.xSeptember 2026 + 2026.05.3
    + + Changelog + +     		2026-09-10 + + + .tar.gz +
    + [PGP sig] +     		+ + + .tar.xz +
    + [PGP sig] +
    Long-term support2025.02.xMarch 2028 + 2025.02.19
    + + Changelog + +     		2026-10-22 + + + .tar.gz +
    + [PGP sig] +     		+ + + .tar.xz +
    + [PGP sig] +
    This and earlier releases (and their PGP signatures) can always be downloaded from - http://buildroot.net/downloads/. + https://buildroot.org/downloads/.
    @@ -136,7 +150,7 @@

    buildroot-2025.08-rc3.tar.


    If you are not already familiar with using Git, we recommend - you visit the Git + you visit the Git website.

    Once you've checked out a copy of the source tree, you can diff --git a/docs/website/fonts/compagnon-light.woff b/docs/website/fonts/compagnon-light.woff new file mode 100644 index 00000000000..b0c6e876497 Binary files /dev/null and b/docs/website/fonts/compagnon-light.woff differ diff --git a/docs/website/fonts/terminal-grotesque.woff b/docs/website/fonts/terminal-grotesque.woff new file mode 100644 index 00000000000..d721311c12d Binary files /dev/null and b/docs/website/fonts/terminal-grotesque.woff differ diff --git a/docs/website/footer.html b/docs/website/footer.html index 82901b7ee60..b93fa46ebbd 100644 --- a/docs/website/footer.html +++ b/docs/website/footer.html @@ -3,5 +3,11 @@ + +

    + + + +
    diff --git a/docs/website/header.html b/docs/website/header.html index 548ed7ad532..0219ea18b49 100644 --- a/docs/website/header.html +++ b/docs/website/header.html @@ -8,6 +8,13 @@ + + + + + + + Buildroot - Making Embedded Linux Easy @@ -41,6 +48,8 @@ Support
  • Contribute
    • +
  • + LTS
  • Sponsors
  • diff --git a/docs/website/images/calian-logo.png b/docs/website/images/calian-logo.png new file mode 100644 index 00000000000..762e0b13dc0 Binary files /dev/null and b/docs/website/images/calian-logo.png differ diff --git a/docs/website/images/ipcomm-logo.png b/docs/website/images/ipcomm-logo.png new file mode 100644 index 00000000000..376f4160ef6 Binary files /dev/null and b/docs/website/images/ipcomm-logo.png differ diff --git a/docs/website/images/logo-og.png b/docs/website/images/logo-og.png new file mode 100644 index 00000000000..c8f893b7d48 Binary files /dev/null and b/docs/website/images/logo-og.png differ diff --git a/docs/website/images/othermo-logo.png b/docs/website/images/othermo-logo.png new file mode 100644 index 00000000000..98f8a93f387 Binary files /dev/null and b/docs/website/images/othermo-logo.png differ diff --git a/docs/website/images/sense-logo.png b/docs/website/images/sense-logo.png index d4cab95b820..d324111638f 100644 Binary files a/docs/website/images/sense-logo.png and b/docs/website/images/sense-logo.png differ diff --git a/docs/website/images/smc-gateway-logo.png b/docs/website/images/smc-gateway-logo.png new file mode 100644 index 00000000000..b530f5ec0bd Binary files /dev/null and b/docs/website/images/smc-gateway-logo.png differ diff --git a/docs/website/images/ti-logo.png b/docs/website/images/ti-logo.png new file mode 100644 index 00000000000..94c8963a0f0 Binary files /dev/null and b/docs/website/images/ti-logo.png differ diff --git a/docs/website/index.html b/docs/website/index.html index d68436c7216..027fd485e02 100644 --- a/docs/website/index.html +++ b/docs/website/index.html @@ -148,4 +148,15 @@

    Buildroot is an open source project: many developers contribute to it daily. +
    +
    +
    +

    Security

    +

    To report a security vulnerability, please send an email to + security@buildroot.org.

    +
    +
    +
    +
    + diff --git a/docs/website/lts.html b/docs/website/lts.html new file mode 100644 index 00000000000..caa9344f4a0 --- /dev/null +++ b/docs/website/lts.html @@ -0,0 +1,366 @@ + + + + +
    +
    + +
    +
    + Buildroot LTS +
    +
    + 3-year long-term support with security fixes +
    +
    +
    + +
    +
    +
    +
    LTS Objectives
    +
    +
    + +
    +
    1
    +
    +

    + 3-year LTS support +

    +

    + Starting with version 2025.02, the LTS support has been extended to + 3 years, replacing the previous 1-year cycle. +

    +
    +
    + +
    + +
    +
    2
    +
    +

    + Vulnerability tracking & reporting +

    +

    + Tracking of the vulnerabilities affecting Buildroot + is available at + security.buildroot.org. +
    + LTS stewards ensure this data remains up-to-date by actively + maintaining Buildroot packages metadata. +

    +
    +
    + +
    + +
    +
    3
    +
    +

    + Sponsored LTS stewards +

    +

    + To ensure a consistent release cadence and maintenance + workflow, paid LTS stewards are assigned to the weekly LTS + maintenance tasks. +

    +
    +
    + +
    + +
    +
    4
    +
    +

    + Dedicated backports +

    +

    + Vulnerability fixes applied to the master branch will be + prioritized for backporting to stable branches. +

    +
    +
    + + +
    +
    +
    Releases
    +
    +
    + +

    + The Buildroot LTS sponsorship initiative has evolved from a more + comprehensive understanding of the needs of our user base. +
    + To address these requirements, the release model evolves into the following. +
    + Starting with 2025.02, the first release of every odd-numbered year is a long-term + support (LTS) release supported for three years. + In between, non-LTS releases are made every 3 months. +

    + +
    + +
    +
    +
    +
    2025
    +
    2026
    +
    2027
    +
    + +
    +
    2025.02
    +
    3 Years Support (LTS)
    +
    + +
    +
    2025.05
    +
    3 mo
    +
    + +
    +
    2025.08
    +
    3 mo
    +
    + +
    +
    2025.11
    +
    3 mo
    +
    + +
    +
    2026.02
    +
    3 mo
    +
    + +
    +
    2026.05
    +
    3 mo
    +
    + +
    +
    2026.08
    +
    3 mo
    +
    + +
    +
    2026.11
    +
    3 mo
    +
    + +
    +
    2027.02
    +
    3 Years Support (LTS)
    +
    + +
    +
    ...
    +
    +
    + +
    +
    + +
    +
    +
    How we work
    +
    +
    + +

    + Each week, the LTS stewards define the set of commits to + analyze based on the previous week's commits to the master branch. The + commits are then annotated to define a list of candidates for the LTS + branches. +

    + +

    + Mid-week, the candidates are cherry-picked to a staging branch hosted on + gitlab.com/essensium-mind/buildroot. + Every maintained branch has a staging branch, with the .x + suffix replaced by .pre. The staging branch allows other + maintainers to review the changes before they are pushed upstream. +

    + +

    + By the end of the week, the staging branches are pushed upstream and + contributors are notified. Feedback from users, sponsors and + autobuilders + are then collected and + vulnerability analyses + updated. +

    + +

    + For more information about the development workflow, see the + documentation. +

    +
    + +
    +
    +
    +
    Monday
    +
    Tuesday
    +
    Wednesday
    +
    Thursday
    +
    Friday
    +
    ...
    +
    + +
    +
    Freeze weekly commit set from master
    +
    +
    + +
    +
    Apply branch specific patches
    +
    +
    + +
    +
    Analysis & commit annotation
    +
    +
    + +
    +
    Cherry picking to staging branch
    +
    +
    + +
    +
    Push to upstream branch
    +
    +
    + +
    +
    Update vulns
    +
    +
    +
    + +
    +
    +
    Sponsorship benefits
    +
    +
    + +
    +
    1
    +
    +

    + Long-term sustainability +

    +

    + Sponsors ensure the long-term sustainability of the Buildroot + LTS effort with dedicated stewards assigned to tasks such as + backporting, security monitoring and LTS releases. +

    +
    +
    + +
    + +
    +
    2
    +
    +

    + Recognition of your sponsorship +

    +

    + Sponsors can be publicly acknowledged on the Buildroot website. + Sponsors may provide a logo linking to a webpage of their + choice. +

    +
    +
    + +
    + +
    +
    3
    +
    +

    + Direct interaction with LTS stewards +

    +

    + Sponsors may submit queries and requests regarding + Buildroot LTS and security updates. +

    +
    +
    + +
    + +
    +
    4
    +
    +

    + Assignment of priorities for package tracking +

    +

    + Buildroot integrates more than 2000 open source packages, + many of which do not offer long-term stable releases or + security updates. +
    +
    + Sponsors may submit a priority list indicating:
    + - Packages of interest
    + - Architectures of interest
    +

    +
    +
    + +
    + +
    +
    5
    +
    +

    + Testing of your packages +

    +

    + To make sure the packages of interest to the sponsors don't + include regressions between releases. + Sponsors may submit a list of packages to be tested + before a bugfix release. +

    +
    +
    + +
    + +
    +
    6
    +
    +

    + Personalized security reports +

    +

    + Sponsors receive personalized security reports for their + Buildroot packages in the form of + security.buildroot.org + with comparison with the upstream branches. +

    +
    +
    + + +

    + Interested ? Contact us at + buildroot-lts@buildroot.org + to learn more about the different sponsorship tiers and get all the + details about the sponsorship. +

    +
    + + diff --git a/docs/website/news.html b/docs/website/news.html index f36ac5894a1..9ce4ff5427e 100644 --- a/docs/website/news.html +++ b/docs/website/news.html @@ -9,6 +9,921 @@

    News

      +
    • +
      +
      +
      +

      2025.02.19 released

      +

      22 October 2026

      +
      +
      +

      The 2025.02.19 bugfix release is out, fixing a number of important / + security related issues discovered since the 2025.02.18 release. See the + CHANGES + file for more details, read the + announcement + and go to the downloads page to pick up the + 2025.02.19 release.

      +
      +
      +
      • + +
    • +
      +
      +
      +

      2026.08.1 released

      +

      22 October 2026

      +
      +
      +

      The 2026.08.1 bugfix release is out, fixing a number of important / + security related issues discovered since the 2026.08 release. See the + CHANGES + file for more details, read the + announcement + and go to the downloads page to pick up the + 2026.08.1 release.

      +
      +
      +
      • + +
    • +
      +
      +
      +

      2026.05.3 released

      +

      10 September 2026

      +
      +
      +

      The 2026.05.3 bugfix release is out, fixing a number of important / + security related issues discovered since the 2026.05.2 release. See the + CHANGES + file for more details, read the + announcement + and go to the downloads page to pick up the + 2026.05.3 release.

      +
      +
      +
      • + +
    • +
      +
      +
      +

      2025.02.18 released

      +

      10 September 2026

      +
      +
      +

      The 2025.02.18 bugfix release is out, fixing a number of important / + security related issues discovered since the 2025.02.17 release. See the + CHANGES + file for more details, read the + announcement + and go to the downloads page to pick up the + 2025.02.18 release.

      +
      +
      +
      • + +
    • +
      +
      +
      +

      2026.08 released

      +

      4 September 2026

      +
      +
      +

      The stable 2026.08 release is out - Thanks to everyone + contributing and testing the release candidates. See the + CHANGES + file for more details, read the + announcement + and go to the downloads page to pick up the + 2026.08 release.

      +
      +
      +
      • + +
    • +
      +
      +
      +

      2026.08-rc3 released

      +

      29 August 2026

      +
      +
      +

      Another week, another release candidate with more cleanups and build fixes. See the + CHANGES + file for more details.

      + +

      Go to the downloads page to pick up the + 2026.08-rc3 + release, and report any problems found to the + mailing list or + bug tracker.

      +
      +
      +
      • + +
    • +
      +
      +
      +

      2026.08-rc2 released

      +

      23 August 2026

      +
      +
      +

      Another week, another release candidate with more cleanups and build fixes. See the + CHANGES + file for more details.

      + +

      Go to the downloads page to pick up the + 2026.08-rc2 + release, and report any problems found to the + mailing list or + bug tracker.

      +
      +
      +
      • + +
    • +
      +
      +
      +

      2026.05.2 released

      +

      23 August 2026

      +
      +
      +

      The 2026.05.2 bugfix release is out, fixing a number of important / + security related issues discovered since the 2026.05.1 release. See the + CHANGES + file for more details, read the + announcement + and go to the downloads page to pick up the + 2026.05.2 release.

      +
      +
      +
      • + +
    • +
      +
      +
      +

      2025.02.17 released

      +

      23 August 2026

      +
      +
      +

      The 2025.02.17 bugfix release is out, fixing a number of important / + security related issues discovered since the 2025.02.16 release. See the + CHANGES + file for more details, read the + announcement + and go to the downloads page to pick up the + 2025.02.17 release.

      +
      +
      +
      • + +
    • +
      +
      +
      +

      2026.08-rc1 released

      +

      18 August 2026

      +
      +
      +

      We have a new release candidate! Lots of changes all over the tree, see the + CHANGES + file for more details.

      + +

      Go to the downloads page to pick up the + 2026.08-rc1 + release, and report any problems found to the + mailing list or + bug tracker.

      +
      +
      +
      • + +
    • +
      +
      +
      +

      2026.05.1 released

      +

      15 July 2026

      +
      +
      +

      The 2026.05.1 bugfix release is out, fixing a number of important / + security related issues discovered since the 2026.05 release. See the + CHANGES + file for more details, read the + announcement + and go to the downloads page to pick up the + 2026.05.1 release.

      +
      +
      +
      • + +
    • +
      +
      +
      +

      2025.02.16 released

      +

      15 July 2026

      +
      +
      +

      The 2025.02.16 bugfix release is out, fixing a number of important / + security related issues discovered since the 2025.02.15 release. See the + CHANGES + file for more details, read the + announcement + and go to the downloads page to pick up the + 2025.02.16 release.

      +
      +
      +
      • + +
    • +
      +
      +
      +

      2025.02.15 released

      +

      16 June 2026

      +
      +
      +

      The 2025.02.15 bugfix release is out, fixing a number of important / + security related issues discovered since the 2025.02.14 release. See the + CHANGES + file for more details, read the + announcement + and go to the downloads page to pick up the + 2025.02.15 release.

      +
      +
      +
      • + +
    • +
      +
      +
      +

      2026.02.3 released

      +

      16 June 2026

      +
      +
      +

      The 2026.02.3 bugfix release is out, fixing a number of important / + security related issues discovered since the 2026.02.2 release. See the + CHANGES + file for more details, read the + announcement + and go to the downloads page to pick up the + 2026.02.3 release.

      +
      +
      +
      • + +
    • +
      +
      +
      +

      2026.05 released

      +

      8 June 2026

      +
      +
      +

      The stable 2026.05 release is out - Thanks to everyone + contributing and testing the release candidates. See the + CHANGES + file for more details, read the + announcement + and go to the downloads page to pick up the + 2026.05 release.

      +
      +
      +
      • + +
    • +
      +
      +
      +

      2026.05-rc4 released

      +

      4 June 2026

      +
      +
      +

      The Nice hackathon brought a large amount of (security) bugfixes, so here comes another + release candidate. See the + CHANGES + file for more details.

      + +

      Go to the downloads page to pick up the + 2026.05-rc4 + release, and report any problems found to the + mailing list or + bug tracker.

      +
      +
      +
      • + +
    • +
      +
      +
      +

      2026.05-rc3 released

      +

      29 May 2026

      +
      +
      +

      Another week, another release candidate with more cleanups and build fixes. See the + CHANGES + file for more details.

      + +

      Go to the downloads page to pick up the + 2026.05-rc3 + release, and report any problems found to the + mailing list or + bug tracker.

      +
      +
      +
      • + +
    • +
      +
      +
      +

      2026.05-rc2 released

      +

      21 May 2026

      +
      +
      +

      Another week, another release candidate with more cleanups and build fixes. See the + CHANGES + file for more details.

      + +

      Go to the downloads page to pick up the + 2026.05-rc2 + release, and report any problems found to the + mailing list or + bug tracker.

      +
      +
      +
      • + +
    • +
      +
      +
      +

      2026.02.2 released

      +

      20 May 2026

      +
      +
      +

      The 2026.02.2 bugfix release is out, fixing a number of important / + security related issues discovered since the 2026.02.1 release. See the + CHANGES + file for more details, read the + announcement + and go to the downloads page to pick up the + 2026.02.2 release.

      +
      +
      +
      • + +
    • +
      +
      +
      +

      2025.02.14 released

      +

      20 May 2026

      +
      +
      +

      The 2025.02.14 bugfix release is out, fixing a number of important / + security related issues discovered since the 2025.02.13 release. See the + CHANGES + file for more details, read the + announcement + and go to the downloads page to pick up the + 2025.02.14 release.

      +
      +
      +
      • + +
    • +
      +
      +
      +

      2026.05-rc1 released

      +

      12 May 2026

      +
      +
      +

      We have a new release candidate! Lots of changes all over the tree, see the + CHANGES + file for more details.

      + +

      Go to the downloads page to pick up the + 2026.05-rc1 + release, and report any problems found to the + mailing list or + bug tracker.

      +
      +
      +
      • + +
    • +
      +
      +
      +

      2026.02.1 released

      +

      21 April 2026

      +
      +
      +

      The 2026.02.1 bugfix release is out, fixing a number of important / + security related issues discovered since the 2026.02 release. See the + CHANGES + file for more details, read the + announcement + and go to the downloads page to pick up the + 2026.02.1 release.

      +
      +
      +
      • + +
    • +
      +
      +
      +

      2025.02.13 released

      +

      21 April 2026

      +
      +
      +

      The 2025.02.13 bugfix release is out, fixing a number of important / + security related issues discovered since the 2025.02.12 release. See the + CHANGES + file for more details, read the + announcement + and go to the downloads page to pick up the + 2025.02.13 release.

      +
      +
      +
      • + +
    • +
      +
      +
      +

      2025.11.3 released

      +

      17 March 2026

      +
      +
      +

      The 2025.11.3 bugfix release is out, fixing a number of important / + security related issues discovered since the 2025.11.2 release. See the + CHANGES + file for more details, read the + announcement + and go to the downloads page to pick up the + 2025.11.3 release.

      +
      +
      +
      • + +
    • +
      +
      +
      +

      2025.02.12 released

      +

      17 March 2026

      +
      +
      +

      The 2025.02.12 bugfix release is out, fixing a number of important / + security related issues discovered since the 2025.02.11 release. See the + CHANGES + file for more details, read the + announcement + and go to the downloads page to pick up the + 2025.02.12 release.

      +
      +
      +
      • + +
    • +
      +
      +
      +

      2026.02 released

      +

      4 March 2026

      +
      +
      +

      The stable 2026.02 release is out - Thanks to everyone + contributing and testing the release candidates. See the + CHANGES + file for more details, read the + announcement + and go to the downloads page to pick up the + 2026.02 release.

      +
      +
      +
      • + +
    • +
      +
      +
      +

      2026.02-rc3 released

      +

      2 March 2026

      +
      +
      +

      Another week, another release candidate with more cleanups and build fixes. See the + CHANGES + file for more details.

      + +

      Go to the downloads page to pick up the + 2026.02-rc3 + release, and report any problems found to the + mailing list or + bug tracker.

      +
      +
      +
      • + +
    • +
      +
      +
      +

      2026.02-rc2 released

      +

      24 February 2026

      +
      +
      +

      Another week, another release candidate with more cleanups and build fixes. See the + CHANGES + file for more details.

      + +

      Go to the downloads page to pick up the + 2026.02-rc2 + release, and report any problems found to the + mailing list or + bug tracker.

      +
      +
      +
      • + +
    • +
      +
      +
      +

      2025.11.2 released

      +

      20 February 2026

      +
      +
      +

      The 2025.11.2 bugfix release is out, fixing a number of important / + security related issues discovered since the 2025.11 release. See the + CHANGES + file for more details, read the + announcement + and go to the downloads page to pick up the + 2025.11.2 release.

      +
      +
      +
      • + +
    • +
      +
      +
      +

      2025.02.11 released

      +

      20 February 2026

      +
      +
      +

      The 2025.02.11 bugfix release is out, fixing a number of important / + security related issues discovered since the 2025.02.9 release. See the + CHANGES + file for more details, read the + announcement + and go to the downloads page to pick up the + 2025.02.11 release.

      +
      +
      +
      • + +
    • +
      +
      +
      +

      2026.02-rc1 released

      +

      17 February 2026

      +
      +
      +

      We have a new release candidate! Lots of changes all over the tree, see the + CHANGES + file for more details.

      + +

      Go to the downloads page to pick up the + 2026.02-rc1 + release, and report any problems found to the + mailing list or + bug tracker.

      +
      +
      +
      • + +
    • +
      +
      +
      +

      Marcus Hoffmann joins the maintainer team

      +

      5 February 2026

      +
      +
      +

      We are happy to announce that Marcus Hoffmann has joined + the team of Buildroot maintainers. For details, see the + announcement.

      +
      +
      +
      • + +
    • +
      +
      +
      +

      2025.11.1 released

      +

      20 January 2026

      +
      +
      +

      The 2025.11.1 bugfix release is out, fixing a number of important / + security related issues discovered since the 2025.11 release. See the + CHANGES + file for more details, read the + announcement + and go to the downloads page to pick up the + 2025.11.1 release.

      +
      +
      +
      • + +
    • +
      +
      +
      +

      2025.02.10 released

      +

      20 January 2026

      +
      +
      +

      The 2025.02.10 bugfix release is out, fixing a number of important / + security related issues discovered since the 2025.02.9 release. See the + CHANGES + file for more details, read the + announcement + and go to the downloads page to pick up the + 2025.02.10 release.

      +
      +
      +
      • + +
    • +
      +
      +
      +

      2025.11 released

      +

      11 December 2025

      +
      +
      +

      The stable 2025.11 release is out - Thanks to everyone + contributing and testing the release candidates. See the + CHANGES + file for more details, read the + announcement + and go to the downloads page to pick up the + 2025.11 release.

      +
      +
      +
      • + +
    • +
      +
      +
      +

      2025.02.9 released

      +

      11 December 2025

      +
      +
      +

      The 2025.02.9 bugfix release is out, fixing a number of important / + security related issues discovered since the 2025.02.8 release. See the + CHANGES + file for more details, read the + announcement + and go to the downloads page to pick up the + 2025.02.9 release.

      +
      +
      +
      • + +
    • +
      +
      +
      +

      2025.08.3 released

      +

      11 December 2025

      +
      +
      +

      The 2025.08.3 bugfix release is out, fixing a number of important / + security related issues discovered since the 2025.08.2 release. See the + CHANGES + file for more details, read the + announcement + and go to the downloads page to pick up the + 2025.08.3 release.

      +
      +
      +
      • + +
    • +
      +
      +
      +

      2025.11-rc2 released

      +

      30 November 2025

      +
      +
      +

      Another week, another release candidate with more cleanups and build fixes. See the + CHANGES + file for more details.

      + +

      Go to the downloads page to pick up the + 2025.11-rc2 + release, and report any problems found to the + mailing list or + bug tracker.

      +
      +
      +
      • + +
    • +
      +
      +
      +

      2025.08.2 released

      +

      20 November 2025

      +
      +
      +

      The 2025.08.2 bugfix release is out, fixing a number of important / + security related issues discovered since the 2025.08.1 release. See the + CHANGES + file for more details, read the + announcement + and go to the downloads page to pick up the + 2025.08.2 release.

      +
      +
      +
      • + +
    • +
      +
      +
      +

      2025.02.8 released

      +

      20 November 2025

      +
      +
      +

      The 2025.02.8 bugfix release is out, fixing a number of important / + security related issues discovered since the 2025.02.7 release. See the + CHANGES + file for more details, read the + announcement + and go to the downloads page to pick up the + 2025.02.8 release.

      +
      +
      +
      • + +
    • +
      +
      +
      +

      2025.11-rc1 released

      +

      20 November 2025

      +
      +
      +

      We have a new release candidate! Lots of changes all over the tree, see the + CHANGES + file for more details.

      + +

      Go to the downloads page to pick up the + 2025.11-rc1 + release, and report any problems found to the + mailing list or + bug tracker.

      +
      +
      +
      • + +
    • +
      +
      +
      +

      2025.02.7 released

      +

      11 October 2025

      +
      +
      +

      The 2025.02.7 bugfix release is out, fixing a number of important / + security related issues discovered since the 2025.02.6 release. See the + CHANGES + file for more details, read the + announcement + and go to the downloads page to pick up the + 2025.02.7 release.

      +
      +
      +
      • + +
    • +
      +
      +
      +

      2025.05.3 released

      +

      11 October 2025

      +
      +
      +

      The 2025.05.3 bugfix release is out, fixing a number of important / + security related issues discovered since the 2025.05.2 release. See the + CHANGES + file for more details, read the + announcement + and go to the downloads page to pick up the + 2025.05.3 release. + This is the last release of the 2025.05 stable series.

      +
      +
      +
      • + +
    • +
      +
      +
      +

      2025.08.1 released

      +

      11 October 2025

      +
      +
      +

      The 2025.08.1 bugfix release is out, fixing a number of important / + security related issues discovered since the 2025.08 release. See the + CHANGES + file for more details, read the + announcement + and go to the downloads page to pick up the + 2025.08.1 release.

      +
      +
      +
      • + +
    • +
      +
      +
      +

      2025.05.2 released

      +

      9 September 2025

      +
      +
      +

      The 2025.05.2 bugfix release is out, fixing a number of important / + security related issues discovered since the 2025.05.1 release. See the + CHANGES + file for more details, read the + announcement + and go to the downloads page to pick up the + 2025.05.2 release.

      +
      +
      +
      • + +
    • +
      +
      +
      +

      2025.02.6 released

      +

      9 September 2025

      +
      +
      +

      The 2025.02.6 bugfix release is out, fixing a number of important / + security related issues discovered since the 2025.02.5 release. See the + CHANGES + file for more details, read the + announcement + and go to the downloads page to pick up the + 2025.02.6 release.

      +
      +
      +
      • + +
    • +
      +
      +
      +

      2025.08 released

      +

      9 September 2025

      +
      +
      +

      The stable 2025.08 release is out - Thanks to everyone + contributing and testing the release candidates. See the + CHANGES + file for more details, read the + announcement + and go to the downloads page to pick up the + 2025.08 release.

      +
      +
      +
      • +
    • @@ -891,7 +1806,7 @@

      LTS Sponsoring announced

      and join this initiative that's shaping the future of Buildroot.

      Find more information on the - Buildroot LTS Sponsoring + Buildroot LTS Sponsoring page.

      diff --git a/docs/website/sponsors.html b/docs/website/sponsors.html index ba11b4b081d..5e27166b770 100644 --- a/docs/website/sponsors.html +++ b/docs/website/sponsors.html @@ -1,5 +1,7 @@ + +
      @@ -9,61 +11,126 @@

      The maintenance of the Long Term Support branch of Buildroot is possible thanks to the sponsors of the - Buildroot LTS Sponsorship + Buildroot LTS Sponsorship Program.

      Gold Sponsors

      -
      +
      +