diff --git a/docs/analog/board-regression-2026-10-19.md b/docs/analog/board-regression-2026-10-19.md
index 7d466253b2..ddbd2a2b35 100644
--- a/docs/analog/board-regression-2026-10-19.md
+++ b/docs/analog/board-regression-2026-10-19.md
@@ -11,7 +11,7 @@ What this document does not say: nothing about speed, power or value. The Fmax f
 - Source: `origin/master` at `fe14b691f3aa70119dda7b312ecf2e6a80c77937` (the head when the run started). The two specs were not edited; a negative control is the same spec with one literal changed in a working copy, restored with `git checkout` afterwards (`git status` was clean).
 - Date and place: 2026-10-19, the owner's Mac (Darwin 25.3.0). Builds 21:43 to 22:04, flash and capture 22:04 to 22:06 (UTC+7).
 - `t27b`: built for this run from the same tree, `CARGO_TARGET_DIR=<scratch>/tgt cargo build --release --locked -p t27b` (about 8 minutes on a loaded machine), 3116592 bytes, sha256 `406248007b5646335073f880c05470138a1614b2c780ff78b0abc836c6cf4afd`. An older `t27b` binary from 2026-10-18 22:41 exists in another worktree; it predates several commits to `cli/t27b` and `gen-verilog`, so it was not used.
-- Toolchain directory `O=/Users/playom/t27/build/fpga/openxc7`: yosys 0.63 (git 70a11c6bf0e8dd669f56c7da3587f78b405138e2, Homebrew), `$O/np-main/build/nextpnr-xilinx` (Version a0410d5), chipdb `$O/xc7a200tfbg484-2.bin` (md5 `59f828c441e6e6081bfee63ff994660e`), `$O/prjxray/utils/fasm2frames.py` run with `$O/venv/bin/python3` and `PYTHONPATH=$O/prjxray`, `$O/px-main/build/tools/xc7frames2bit`, `openFPGALoader v1.1.1` (Homebrew).
+- Toolchain directory `O="$(git rev-parse --git-common-dir)/../build/fpga/openxc7"`: yosys 0.63 (git 70a11c6bf0e8dd669f56c7da3587f78b405138e2, Homebrew), `$O/np-main/build/nextpnr-xilinx` (Version a0410d5), chipdb `$O/xc7a200tfbg484-2.bin` (md5 `59f828c441e6e6081bfee63ff994660e`), `$O/prjxray/utils/fasm2frames.py` run with `$O/venv/bin/python3` and `PYTHONPATH=$O/prjxray`, `$O/px-main/build/tools/xc7frames2bit`, `openFPGALoader v1.1.1` (Homebrew).
 - Board and cable: ALINX AX7203, `xc7a200tfbg484-2`. The Digilent HS2 cable (0x0403:0x6014, FT232H) is now on USB bus 001, device 004: `openFPGALoader -c digilent_hs2 --scan-usb` listed `001 004`, and `--detect` read idcode `0x3636093` (xc7a200, artix a7 200t). The earlier runs used `--busdev-num 000:004`; that now answers `unable to open ftdi device: -3 (device not found)`. Flashing therefore used `--busdev-num 001:004`. A second Digilent FTDI device (0x0403:0x6010) is on the bus; it was not used.
 - Flashing: SRAM only (`openFPGALoader` without `-f` or `-m`; its output shows `Load SRAM`). No flash memory and no eFUSE was written. The HDMI capture path was not touched.
 - Reader: from the terminal tab of the desktop app only; one reader per capture: the port is opened on fd 3, `stty 115200 raw cs8 -cstopb -parenb clocal <&3`, `cat <&3 > <capture> &`, `sleep <s>`, `kill` of that pid, `wait`, `exec 3<&-`; `lsof` showed the port free before every capture (`PORT_BUSY` check) and after every capture (`port released`).