Point the FEI PDU configs at the right Eatons

config/hspower/hspower_fei1.yaml

@@ -10,10 +10,8 @@ group_id: hspower
 
 hardware:
   # feieaton1, per the /etc/hosts table in
-  # docs/build_notes/host_machine_build_notes.rst. That table also lists a
-  # third FEI unit, feieaton3 (192.168.29.106), so confirm which two of the
-  # three the FEI actually runs before deploying.
-  ip_address: 192.168.29.102
+  # docs/build_notes/host_machine_build_notes.rst
+  ip_address: 192.168.29.105
   tcp_port: 23
   # TODO: confirm against the hardware. EMAT-08 has eight outlets, EMAT-10 has
   # ten, and this is what decides how many outlet keyword blocks exist; the

config/hspower/hspower_fei2.yaml

@@ -10,10 +10,8 @@ group_id: hspower
 
 hardware:
   # feieaton2, per the /etc/hosts table in
-  # docs/build_notes/host_machine_build_notes.rst. That table also lists a
-  # third FEI unit, feieaton3 (192.168.29.106), so confirm which two of the
-  # three the FEI actually runs before deploying.
-  ip_address: 192.168.29.105
+  # docs/build_notes/host_machine_build_notes.rst
+  ip_address: 192.168.29.106
   tcp_port: 23
   # TODO: confirm against the hardware. EMAT-08 has eight outlets, EMAT-10 has
   # ten, and this is what decides how many outlet keyword blocks exist; the

config/hspower/hspower_rspec1.yaml

@@ -9,12 +9,11 @@ peer_id: rspec1
 group_id: hspower
 
 hardware:
-  # TODO: address unknown — the /etc/hosts table in
-  # docs/build_notes/host_machine_build_notes.rst documents no red-side
-  # Eaton, though the pdu driver's README uses 'redeaton1' as its example
-  # host. Left unset on purpose: the daemon then starts, serves its keywords
-  # and reports 'missing PDU connection parameters' rather than reaching for
-  # a guessed address.
+  # TODO: which unit is unknown. The /etc/hosts table in
+  # docs/build_notes/host_machine_build_notes.rst lists redeaton1, redeaton2
+  # and redeaton3, and there is one RSPEC config. Left unset on purpose: the
+  # daemon then starts, serves its keywords and reports 'missing PDU
+  # connection parameters' rather than reaching for a guessed address.
   ip_address:
   tcp_port: 23
   # TODO: confirm against the hardware. EMAT-08 has eight outlets, EMAT-10 has

docs/build_notes/host_machine_build_notes.rst

@@ -231,19 +231,42 @@ Edit ``/etc/hosts`` to include the private network entries for HISPEC, ordered n
 
 .. code-block:: text
 
-   192.168.29.100 feilantronix
-   192.168.29.101 switch
-   192.168.29.102 feieaton1
-   192.168.29.104 feilakeshore
-   192.168.29.105 feieaton2
-   192.168.29.106 feieaton3
-   192.168.29.120 feiinficon
-   192.168.29.125 blueinficon
-   192.168.29.150 blueettemp
-   192.168.29.151 blueeaton1
-   192.168.29.152 blueeaton2
-   192.168.29.153 bluelantronix
-   192.168.29.154 hs1wireblue
+   192.168.29.2    hispecserver
+   192.168.29.3    hispecserverlom
+   192.168.29.4    specswitchspare
+   192.168.29.100  feilantronix
+   192.168.29.101  feiswitch
+   192.168.29.102  feidcpdu2
+   192.168.29.104  feilakeshore
+   192.168.29.105  feieaton1
+   192.168.29.106  feieaton2
+   192.168.29.107  feifsm
+   192.168.29.109  feitrackcomp
+   192.168.29.110  feidcpdu1
+   192.168.29.120  feiinficon
+   192.168.29.122  tmpstanda
+   192.168.29.123  redatten rediriscontroller
+   192.168.29.125  blueinficon
+   192.168.29.129  redswitch
+   192.168.29.130  redlantronix
+   192.168.29.131  specblueinficon
+   192.168.29.132  specredinficon
+   192.168.29.135  redinficon
+   192.168.29.136  specredlakeshore
+   192.168.29.140  hs1wirered
+   192.168.29.145  host
+   192.168.29.150  blueettemp
+   192.168.29.151  blueeaton1
+   192.168.29.152  blueeaton2
+   192.168.29.153  bluelantronix
+   192.168.29.154  hs1wireblue
+   192.168.29.161  redlakeshore1
+   192.168.29.162  redlakeshore2
+   192.168.29.163  redeaton1
+   192.168.29.164  redeaton2
+   192.168.29.165  redettemp
+   192.168.29.166  redeaton3
+   192.168.29.175  cred2
 
 MQTT Broker Setup
 -----------------