Skip to content

About

Put a Stream Deck on the network. ESP32-P4 firmware for Bitfocus Companion and the Elgato App.

Topics

Resources

Contributing

Security policy

Stars

1 star

Watchers

0 watching

Forks

Repository files navigation

DeckConnector logo

DeckConnector

Your Stream Deck on the network.
A small ESP32-P4 board drives it over USB.
Bitfocus Companion and the Elgato App use it like an Elgato Network Dock.

Website · Live demo · Flash in the browser · Docs

The web UI with the live deck on top. Below it, Home Assistant shows the same deck picture, the brightness and the volume, and each key press and dial turn as an event

  • Companion connects over Satellite or as a Network Dock. The Elgato App sees a Network Dock.
  • Several programs connect at once. You pick the one that draws.
  • Several decks on one connector.
  • Ethernet with PoE, and Wi-Fi with a backup network.
  • Home Assistant gets every key press and the deck picture. It sets the brightness and the volume, and picks the program that draws. Open DeckConnector in HACS
  • Matter, tested with Home Assistant and Apple Home.
  • The web UI shows the live deck, and you can press its keys.
  • Log in with a passkey, or confirm the login on the deck.

Get started

  1. Get a Waveshare ESP32-P4-WIFI6-POE-ETH board.
  2. Flash it in the browser. There is nothing to install.
  3. Plug in the deck and open the address it shows. The setup wizard does the rest.

Everything else is in the docs. To build it yourself or to help, see CONTRIBUTING.

License

AGPL-3.0. Warranty, trademarks and an added permission are in NOTICE.md.

Support DeckConnector on GitHub Sponsors or Ko-fi.

About

Put a Stream Deck on the network. ESP32-P4 firmware for Bitfocus Companion and the Elgato App.

Topics

Resources

Contributing

Security policy

Stars

1 star

Watchers

0 watching

Forks

Releases

Packages

Used by

Contributors

Languages