Update WS1001 bird spikes installation images

docs/wxm-devices/d1/assemble.mdx

@@ -166,13 +166,10 @@ Each weather station comes with the following bird spike components:
   <div class="control">
   <img src={useBaseUrl("img/wxm-devices/ws1001/bird-spikes-2.png")} />
 </div>
-	4.	Secure the Metal Zip Tie: Carefully secure the metal zip tie on top of the rain cup to ensure the spike holders are firmly in place and will not fall off.
-<div class="control">
-  <img src={useBaseUrl("img/wxm-devices/ws1001/bird-spikes-3.png")} />
-</div>
-  5. Place the spikes, short side down, in the designated spots on the ring. The final setup should match the image below.
-<div class="control">
-  <img src={useBaseUrl("img/wxm-devices/ws1001/bird-spikes-4.png")} />
+	4.	Secure the Metal Zip Tie: Carefully secure the metal zip tie on top of the rain cup to ensure the spike holders are firmly in place and will not fall off. 
+5. Place the spikes, short side down, in the designated spots on the ring. The final setup should match the image below. 
+<div class="control"> 
+  <img src={useBaseUrl("img/wxm-devices/ws1001/bird-spikes-installed.jpg")} /> 
 </div>
 
 <hr/>
@@ -189,4 +186,4 @@ The U-bolts and the metal plate are used to support the mounting of the outdoor
 The straight edge of the metal plate is inserted in the groove at the bottom of the unit (at the opposite side of the solar panel).
 The curved part of the 90-degree angle bent edge of the metal plate should be oriented to the wind sensor in order to “hug” the mounting pole.
 After inserting the metal plate, the U-bolts should be inserted through the respective holes of the metal plate.
-Loosely screw the nuts on the ends of the U-bolts. They will be tightened later when mounting on the pole (see [Mounting the outdoor sensor](/wxm-devices/m5/install-weather-station#mounting-the-outdoor-sensor)).
+Loosely screw the nuts on the ends of the U-bolts. They will be tightened later when mounting on the pole (see [Mounting the outdoor sensor](/wxm-devices/m5/install-weather-station#mounting-the-outdoor-sensor)).