llama.cpp b11080 → b11211, CUDA 13.4, ROCm 10 (TheRock), sccache on every Windows Ninja job

.github/build.bat

@@ -49,11 +49,40 @@ REM nvcc command line (it dies with `sccache: error: Could not parse shell line`
 REM fails every .cu compile). So CUDA device code is built by nvcc directly (uncached)
 REM here; the cl.exe C/C++ TUs still cache via the C/CXX launcher set above.
 
+REM The probe above only proves sccache can wrap cl.exe. Several jobs compile with a
+REM different compiler (clang-cl on arm64, ROCm's clang, Intel icx), which sccache may
+REM refuse or mishandle -- so a configure or build that fails WITH the launcher is
+REM retried ONCE from a clean build dir WITHOUT it (the build.sh retry, but unconditional:
+REM cmd cannot tee the output to match an sccache error signature). A genuine compile
+REM error therefore still fails, just after one uncached attempt; a cache/compiler
+REM incompatibility ends green and uncached, never red.
+REM -DGGML_CCACHE=OFF on every configure: ggml otherwise self-enables any ccache/sccache it
+REM finds on PATH when no launcher is set -- i.e. exactly in the probe-failed and retry
+REM cases -- via the global RULE_LAUNCH_COMPILE, silently re-caching the uncached build.
+REM No goto/labels on purpose: this file is checked out with LF line endings
+REM (.gitattributes eol=lf), and cmd's label search is unreliable in LF-only scripts.
+set "RETRY="
 mkdir build
-cmake -Bbuild %LAUNCH% %*
-if errorlevel 1 exit /b 1
-cmake --build build --config Release
-set "BUILD_RC=!ERRORLEVEL!"
+cmake -Bbuild %LAUNCH% -DGGML_CCACHE=OFF %*
+if errorlevel 1 (
+    if not defined LAUNCH exit /b 1
+    set "RETRY=1"
+) else (
+    cmake --build build --config Release
+    set "BUILD_RC=!ERRORLEVEL!"
+    if not "!BUILD_RC!"=="0" if defined LAUNCH set "RETRY=1"
+)
+if defined RETRY (
+    echo build.bat: build WITH sccache failed -- retrying ONCE from scratch WITHOUT the cache.
+    sccache --show-stats
+    set "LAUNCH="
+    rmdir /s /q build
+    mkdir build
+    cmake -Bbuild -DGGML_CCACHE=OFF %*
+    if errorlevel 1 exit /b 1
+    cmake --build build --config Release
+    set "BUILD_RC=!ERRORLEVEL!"
+)
 
 REM Print cache stats (best-effort) regardless of build outcome -- only when sccache
 REM was wired in as the launcher.

.github/build_cuda_linux.sh

@@ -5,15 +5,15 @@
 #
 # SPDX-License-Identifier: MIT
 
-# A Cuda 13.3 install script for RHEL8/Rocky8/Manylinux_2.28
+# A Cuda 13.4 install script for RHEL8/Rocky8/Manylinux_2.28
 # Available versions can be found at:
 # https://developer.download.nvidia.com/compute/cuda/repos/rhel8/x86_64/
 
 sudo dnf install -y kernel-devel kernel-headers
 sudo dnf install -y https://dl.fedoraproject.org/pub/epel/epel-release-latest-8.noarch.rpm
 sudo dnf config-manager --add-repo https://developer.download.nvidia.com/compute/cuda/repos/rhel8/x86_64/cuda-rhel8.repo
 
-sudo dnf install -y cuda-toolkit-13-3
+sudo dnf install -y cuda-toolkit-13-4
 
 # CUDA target architectures — LOCAL-dev build-speed knob.
 #
@@ -38,4 +38,4 @@ case "${CUDA_FAST_BUILD:-}" in
     ;;
 esac
 
-exec .github/build.sh $@ -DGGML_CUDA=1 -DCMAKE_CUDA_COMPILER=/usr/local/cuda-13.3/bin/nvcc $CUDA_ARCH_ARGS
+exec .github/build.sh $@ -DGGML_CUDA=1 -DCMAKE_CUDA_COMPILER=/usr/local/cuda-13.4/bin/nvcc $CUDA_ARCH_ARGS

.github/dockcross/dockcross-android-arm

@@ -268,10 +268,10 @@ exit $run_exit_code
 # This image is not intended to be run manually.
 #
 # To create a dockcross helper script for the
-# dockcross/android-arm:20240418-88c04a4 image, run:
+# dockcross/android-arm:20260712-79e54f9 image, run:
 #
-# docker run --rm dockcross/android-arm:20240418-88c04a4 > dockcross-android-arm-20240418-88c04a4
-# chmod +x dockcross-android-arm-20240418-88c04a4
+# docker run --rm dockcross/android-arm:20260712-79e54f9 > dockcross-android-arm-20260712-79e54f9
+# chmod +x dockcross-android-arm-20260712-79e54f9
 #
 # You may then wish to move the dockcross script to your PATH.
 #

.github/dockcross/dockcross-android-arm64

@@ -268,10 +268,10 @@ exit $run_exit_code
 # This image is not intended to be run manually.
 #
 # To create a dockcross helper script for the
-# dockcross/android-arm64:20240418-88c04a4 image, run:
+# dockcross/android-arm64:20260712-79e54f9 image, run:
 #
-# docker run --rm dockcross/android-arm64:20240418-88c04a4 > dockcross-android-arm64-20240418-88c04a4
-# chmod +x dockcross-android-arm64-20240418-88c04a4
+# docker run --rm dockcross/android-arm64:20260712-79e54f9 > dockcross-android-arm64-20260712-79e54f9
+# chmod +x dockcross-android-arm64-20260712-79e54f9
 #
 # You may then wish to move the dockcross script to your PATH.
 #

.github/dockcross/dockcross-android-x86_64

@@ -268,10 +268,10 @@ exit $run_exit_code
 # This image is not intended to be run manually.
 #
 # To create a dockcross helper script for the
-# dockcross/android-x86_64:20240418-88c04a4 image, run:
+# dockcross/android-x86_64:20260712-79e54f9 image, run:
 #
-# docker run --rm dockcross/android-x86_64:20240418-88c04a4 > dockcross-android-x86_64-20240418-88c04a4
-# chmod +x dockcross-android-x86_64-20240418-88c04a4
+# docker run --rm dockcross/android-x86_64:20260712-79e54f9 > dockcross-android-x86_64-20260712-79e54f9
+# chmod +x dockcross-android-x86_64-20260712-79e54f9
 #
 # You may then wish to move the dockcross script to your PATH.
 #

.github/dockcross/dockcross-linux-arm64-lts

@@ -268,10 +268,10 @@ exit $run_exit_code
 # This image is not intended to be run manually.
 #
 # To create a dockcross helper script for the
-# dockcross/linux-arm64-lts:20230601-c2f5366 image, run:
+# dockcross/linux-arm64-lts:20260712-79e54f9 image, run:
 #
-# docker run --rm dockcross/linux-arm64-lts:20230601-c2f5366 > dockcross-linux-arm64-lts-20230601-c2f5366
-# chmod +x dockcross-linux-arm64-lts-20230601-c2f5366
+# docker run --rm dockcross/linux-arm64-lts:20260712-79e54f9 > dockcross-linux-arm64-lts-20260712-79e54f9
+# chmod +x dockcross-linux-arm64-lts-20260712-79e54f9
 #
 # You may then wish to move the dockcross script to your PATH.
 #

.github/dockcross/dockcross-manylinux2014-x64

@@ -268,10 +268,10 @@ exit $run_exit_code
 # This image is not intended to be run manually.
 #
 # To create a dockcross helper script for the
-# dockcross/manylinux2014-x64:20230601-c2f5366 image, run:
+# dockcross/manylinux2014-x64:20260712-79e54f9 image, run:
 #
-# docker run --rm dockcross/manylinux2014-x64:20230601-c2f5366 > dockcross-manylinux2014-x64-20230601-c2f5366
-# chmod +x dockcross-manylinux2014-x64-20230601-c2f5366
+# docker run --rm dockcross/manylinux2014-x64:20260712-79e54f9 > dockcross-manylinux2014-x64-20260712-79e54f9
+# chmod +x dockcross-manylinux2014-x64-20260712-79e54f9
 #
 # You may then wish to move the dockcross script to your PATH.
 #

.github/dockcross/dockcross-manylinux_2_28-x64

@@ -268,10 +268,10 @@ exit $run_exit_code
 # This image is not intended to be run manually.
 #
 # To create a dockcross helper script for the
-# dockcross/manylinux_2_28-x64:20240812-60fa1b0 image, run:
+# dockcross/manylinux_2_28-x64:20260712-79e54f9 image, run:
 #
-# docker run --rm dockcross/manylinux_2_28-x64:20240812-60fa1b0 > dockcross-manylinux_2_28-x64-20240812-60fa1b0
-# chmod +x dockcross-manylinux_2_28-x64-20240812-60fa1b0
+# docker run --rm dockcross/manylinux_2_28-x64:20260712-79e54f9 > dockcross-manylinux_2_28-x64-20260712-79e54f9
+# chmod +x dockcross-manylinux_2_28-x64-20260712-79e54f9
 #
 # You may then wish to move the dockcross script to your PATH.
 #