[dependabot]

Updates the requirements on asyncpg, fastapi, pyjwt, python-dotenv, uvicorn and pytest to permit the latest version.
Updates asyncpg to 0.32.0

Release notes

Sourced from asyncpg's releases.

v0.32.0

Improvements

• Support Python 3.15 (#1367, #1378) (by @​elprans in 1b118464 and 58c0c595)

• Support PostgreSQL 19 (#1379) (by @​elprans in 8d2a5aed)

• Make pool min_size a maintained connection floor and add init_size to control the number of connections opened at startup (#1323). Idle connections at or below min_size are retained, and closed connections are replaced in the background. init_size defaults to min_size. To preserve the previous behavior, where the pool could drain to zero, replace min_size=N with init_size=N, min_size=0. (by @​shatilov-diman in 67a1cbc5)

• Use hashlib.pbkdf2_hmac() for faster SCRAM password derivation (#1359) (by @​twelfthlabor in 00319a9b)

• Use the statement cache for copy_records_to_table() introspection (#1360) (by @​matemax in dd058652)

Fixes

• Clean up connections rejected by target_session_attrs immediately so an unresponsive rejected host cannot delay the selected connection, and cleanup tasks cannot outlive the event loop. Rejected connections are aborted without waiting for a graceful disconnect; servers may log "unexpected EOF on client connection" if the Terminate message is not delivered before the transport closes.

• Fix a connection pool deadlock when releasing a connection after a protocol abort (#1324) (by @​pchaseh in 4a83cc2f)

• Honor Connection.close(timeout=...) while waiting for a pending cancellation (#1361) (by @​gyanu2507 in c06bcb4d)

• Prevent stuck cancellation from blocking connection teardown or pool release by bounding cancellation with the command or release timeout (#1370) (by @​elprans in 4cf02203)

• Preserve the server error when the connection closes mid-operation (#1369) (by @​RitiGrover in 6c8f1a7a)

• Fix COPY cleanup when a records generator raises, preserving the original exception and avoiding protocol desynchronization and stalled rollback (#1358) (by @​CodingCossack in fdc6bc8f)

... (truncated)

Commits

• d701e11 asyncpg v0.32.0
• b04f8f2 Bump to macOS 26 in runners, set deployment target to 11 (#1384)
• 3934d77 tests: Capture expected pool retry warnings during role changes (#1383)
• 2c37501 tests: Avoid DeprecationWarning when settings up uvloop (#1382)
• b7eea79 Test pool min_size backoff on target attribute mismatch (#1381)
• 46dda91 Terminate rejected target_session_attrs candidates before returning (#1380)
• 8d2a5ae Support PostgreSQL 19 (#1379)
• 58c0c59 Bump uvloop (#1378)
• 67a1cbc Make pool min_size a maintained connection floor (#1323)
• 25aaaf5 fix: allow cursors in external transactions (#1350)
• Additional commits viewable in compare view

Updates fastapi to 0.162.0

Release notes

Sourced from fastapi's releases.

0.162.0

Omitted bool and bool | None form fields now use their declared defaults or produce missing-field errors, consistent with other fields and Pydantic behavior. FastAPI no longer infers False for omitted booleans. This applies to individual form parameters, form models, and unions of form models.

Omitted boolean model fields are excluded from model_dump(exclude_unset=True), and their defaults no longer count as submitted fields during union selection. Default factories and validate_default follow the usual rules.

For HTML checkboxes, declare a boolean with a default of False. See Boolean Form Fields.

Breaking Changes

• 🐛 Restore default handling for omitted boolean form fields. PR #16605 by @​tiangolo.

Commits

• 7a0a3f0 🔖 Release version 0.162.0 (#16606)
• b56f7c6 📝 Update release notes
• f02ef49 🐛 Restore default handling for omitted boolean form fields (#16605)
• 69ddc2b 🔖 Release version 0.161.1 (#16599)
• 0cafa07 📝 Update release notes
• f90d036 🐛 Fix OpenAPI schemas for standalone nullable form unions (#16598)
• 80c8742 🔖 Release version 0.161.0 (#16597)
• b105209 📝 Update release notes
• e42ac0a ✨ Add support for combining unions of form models (#16596)
• addd077 🔖 Release version 0.160.0 (#16595)
• Additional commits viewable in compare view

Updates pyjwt to 2.15.1

Release notes

Sourced from pyjwt's releases.

2.15.1

See the 2.15.1 changelog for complete release details.

Changelog

Sourced from pyjwt's changelog.

v2.15.1 <https://github.com/jpadilla/pyjwt/compare/2.15.0...2.15.1>__

Fixed

- Accept trailing Base64URL ``=`` padding when decoding JWS segments, so
  tokens issued by AWS ALB and similar systems verify instead of raising
  ``DecodeError: Invalid crypto padding``. Non-alphabet junk such as
  ``!!!!`` remains rejected (`[#1209](https://github.com/jpadilla/pyjwt/issues/1209) <https://github.com/jpadilla/pyjwt/issues/1209>`__).
v2.15.0 &lt;https://github.com/jpadilla/pyjwt/compare/2.14.0...2.15.0&gt;__
Security

• Wrap recursion errors from deeply nested JWT payloads in DecodeError instead of exposing a raw RecursionError.

Added

- Support Python 3.15 by @kytta in `[#1202](https://github.com/jpadilla/pyjwt/issues/1202) <https://github.com/jpadilla/pyjwt/pull/1202>`__
Changed

• JWKSetCache now stores the parsed PyJWKSet rather than the raw JWKS payload, so a cache hit no longer re-parses every key. JWKSetCache.put() accepts either form and raises PyJWKSetError for anything else. As a result, PyJWKClient.get_jwk_set() returns the same PyJWKSet instance for as long as it stays cached, rather than a freshly built one per call in [#1208](https://github.com/jpadilla/pyjwt/issues/1208) <https://github.com/jpadilla/pyjwt/pull/1208>__
• PyJWKClient.fetch_data() now raises PyJWKClientError("The JWKS endpoint did not return a JSON object") when the endpoint response is not a JSON object, instead of returning it for get_jwk_set() to reject. Callers reaching the JWKS through get_jwk_set() see the same error as before in [#1208](https://github.com/jpadilla/pyjwt/issues/1208) <https://github.com/jpadilla/pyjwt/pull/1208>__

Fixed

- Return cached ``PyJWKSet`` values from ``PyJWKClient.get_jwk_set()`` instead
  of raising ``PyJWKClientError("The JWKS endpoint did not return a JSON
  object")``. ``JWKSetCache.put()`` documents ``PyJWKSet`` as the cached value,
  so callers pre-populating the cache to avoid a network round-trip could not
  read it back in `[#914](https://github.com/jpadilla/pyjwt/issues/914) <https://github.com/jpadilla/pyjwt/issues/914>`__ and
  `[#1208](https://github.com/jpadilla/pyjwt/issues/1208) <https://github.com/jpadilla/pyjwt/pull/1208>`__
</tr></table> 

... (truncated)

Commits

• 7d5ef55 chore: prepare 2.15.1 release
• 7bf3252 Accept canonical Base64URL padding in JWT segments (#1216)
• 1d41a64 chore: prepare 2.15.0 release
• 9bc0665 fix: make recursive payload tests deterministic
• 5fde08a fix: normalize recursive JWT payload errors
• 171062d utils: mention bytes in force_bytes type error (#1173)
• c9d4d53 docs/conf: drop duplicate 'and' from read() docstring (#1174)
• 2763752 Add support for Python 3.15 (#1202)
• 4adcd02 Catch http.client.HTTPException in PyJWKClient.fetch_data (#1201)
• 9e501d9 fix: correct docstring typo in _validate_jti (#1179)
• Additional commits viewable in compare view

Updates python-dotenv to 1.2.4

Release notes

Sourced from python-dotenv's releases.

v1.2.4

Fixed

• dotenv get no longer exits with code 1 for empty string values (KEY=) by [@​ShamikOfficial] in #700
• An unquoted empty value followed by an inline comment (e.g. KEY= # comment) is now parsed as an empty string instead of the comment text by [@​Noethix55555] in #663
• dotenv run --no-override now expands variable references with the same precedence as load_dotenv(override=False), so a value like ${BASE}/suffix uses the existing BASE from the environment instead of the one from the .env file by [@​ROTl24] in #698

Changelog

Sourced from python-dotenv's changelog.

[1.2.4] - 2026-10-01

Fixed

• dotenv get no longer exits with code 1 for empty string values (KEY=) by [@​ShamikOfficial] in #700
• An unquoted empty value followed by an inline comment (e.g. KEY= # comment) is now parsed as an empty string instead of the comment text by [@​Noethix55555] in #663
• dotenv run --no-override now expands variable references with the same precedence as load_dotenv(override=False), so a value like ${BASE}/suffix uses the existing BASE from the environment instead of the one from the .env file by [@​ROTl24] in #698

[1.2.3] - 2026-08-16

Fixed

• Strip a leading UTF-8 BOM from .env file contents so the first variable is no longer silently lost when the file is saved with BOM (e.g. by some JetBrains IDEs on Windows) by [@​h1whelan] in #640
• set_key now escapes backslashes, so values containing them (Windows paths, regular expressions) survive a write/read round-trip. Quoted values ending in an escaped backslash are no longer mis-parsed as an escaped quote, which used to swallow the following lines by [@​dchaudhari7177] in #680
• dotenv run now prints a friendly error instead of a traceback when no command is given by [@​bbc2] in #606
• Cache the parsed result for empty .env files so repeated dotenv_values/load_dotenv calls no longer re-read the file by [@​ReinerBRO] in #638

[1.2.2] - 2026-03-01

Added

• Support for Python 3.14, including the free-threaded (3.14t) build. (#588)

Changed

• The dotenv run command now forwards flags directly to the specified command by [@​bbc2] in #607
• Improved documentation clarity regarding override behavior and the reference page.
• Updated PyPy support to version 3.11.
• Documentation for FIFO file support.
• Dropped Support for Python 3.9.

Fixed

• Improved set_key and unset_key behavior when interacting with symlinks by [@​bbc2] in [790c5c0]
• Corrected the license specifier and added missing Python 3.14 classifiers in package metadata by [@​JYOuyang] in #590

Breaking Changes

• dotenv.set_key and dotenv.unset_key used to follow symlinks in some situations. This is no longer the case. For that behavior to be restored in all cases, follow_symlinks=True should be used.

• In the CLI, set and unset used to follow symlinks in some situations. This is no longer the case.

• dotenv.set_key, dotenv.unset_key and the CLI commands set and unset used to reset the file mode of the modified .env file to 0o600 in some situations. This is no longer the case: The original mode of the file is now preserved. Is the file needed to be created or wasn't a regular file, mode 0o600 is used.

... (truncated)

Commits

• a565c2c Bump version: 1.2.3 → 1.2.4
• 4a7abd0 docs: add 1.2.4 release notes (#663, #698, #700)
• f215c02 fix: dotenv get exits 0 for empty string values (#700)
• 58f2d7c test: make test_run_with_command_flags portable and meaningful (#709)
• e0310e5 fix: honor --no-override when expanding variables in dotenv run (#698)
• a00cb2e docs: add CHANGELOG entry for #663 (fix #600)
• f5485a6 fix: parse empty unquoted value with inline comment as empty string
• See full diff in compare view

Updates uvicorn to 0.54.0

Release notes

Sourced from uvicorn's releases.

Version 0.54.0

📨 Send metadata after the response body

uvicorn 0.54.0 adds response trailers and 103 Early Hints to its experimental HTTP/2 implementation through zttp.

uv add uvicorn==0.54.0 "zttp>=0.0.34"

• Send HTTP/2 response trailers (#3146). The ASGI http.response.trailers extension lets applications send metadata, such as checksums, after the response body. Clients must send TE: trailers to receive them. Multiple trailer messages are combined before completing the response.
• HTTP/2 remains experimental and opt-in. Enable it with --http zttp --http2. Upgrade-based h2c and WebSockets over HTTP/2 remain unsupported.

💡 Hint at resources before the final response

• Send 103 Early Hints over HTTP/2 (#3137). Applications can use the ASGI http.response.early_hint extension to send resource hints before the final response. Each supplied link becomes a separate Link header.

Full changelog: 0.53.0...0.54.0

Changelog

Sourced from uvicorn's changelog.

0.54.0 (September 24, 2026)

HTTP/2 support remains experimental. Install zttp>=0.0.34 and enable it with --http zttp --http2.

Added

• Add HTTP/2 response trailers through the ASGI http.response.trailers extension. Clients must send TE: trailers to receive them (#3146)
• Add HTTP/2 103 Early Hints through the ASGI http.response.early_hint extension (#3137)

0.53.0 (September 14, 2026)

This release adds experimental HTTP/2 support through zttp. Enable it with --http zttp --http2. Upgrade-based h2c and WebSockets over HTTP/2 are not supported.

Added

• Add experimental HTTP/2 support through zttp (#2982, #3101)
• Add support for zuvloop (#3104)

Fixed

• Handle comma-separated, case-insensitive Connection: close tokens across HTTP implementations (#3103)
• Trust IPv6 loopback in the default FORWARDED_ALLOW_IPS value (#3119)
• Cancel the HTTP keep-alive timer when upgrading to WebSocket (#3107)

0.52.4 (August 18, 2026)

Fixed

• Remove duplicate Date headers from accepted WebSocket handshakes with websockets-sansio (#3078)

0.52.3 (August 13, 2026)

Changed

• Update zttp to 0.0.24 and use its combined receive path, improving HTTP/1.1 request parsing performance (#3067)

0.52.2 (August 13, 2026)

Fixed

• Update zttp to 0.0.22, fixing bodyless request receives and improving HTTP/1 request parsing performance (#3063)

0.52.1 (August 1, 2026)

Fixed

• Complete the closing handshake on server-initiated WebSocket closes in the websockets-sansio and wsproto implementations, waiting for the client's close reply with a 10 second timeout instead of resetting the connection (#3053)
• Add missing write flow control to the websockets-sansio implementation, preventing data truncation on server-initiated closes with large in-flight payloads (#3048)
• Handle connection loss while a WebSocket write is waiting on backpressure (#3050)

... (truncated)

Commits

• 3eb9a9a Version 0.54.0 (#3161)
• cd7ef6d Remove races from supervisor tests (#3134)
• a56c7cc Support HTTP/2 response trailers (#3146)
• 9bd4404 chore(deps): bump anyio from 4.13.0 to 4.14.2 (#3145)
• 21f39ef Add HTTP/2 Early Hints support (#3137)
• See full diff in compare view

Updates pytest to 9.2.0

Release notes

Sourced from pytest's releases.

9.2.0

pytest 9.2.0 (2026-10-27)

Removals and backward incompatible breaking changes

• #14716: -c now raises a usage error for a path that does not exist, is a directory, or is in a format pytest has no loader for. Such paths were previously either ignored or reported as an unhandled FileNotFoundError.

• #8593: The indirect, ids and scope arguments of Metafunc.parametrize() <pytest.Metafunc.parametrize> -- and therefore of @pytest.mark.parametrize <pytest.mark.parametrize ref> -- are now keyword-only.

  Passing them positionally was a common source of confusing errors, e.g. parametrize("arg1", "arg2", [(1, 2)]) made the argvalues land in indirect and failed with indirect fixture '(1, 2)' doesn't exist; such mistakes now fail with an understandable TypeError. The type annotations have always declared these arguments as keyword-only.

• #993: Plugin import failures at startup are now reported and classified instead of escaping as a raw traceback with the accidental exit code 1:

  • a plugin that cannot be found -- via -p, pytest_plugins or PYTEST_PLUGINS -- exits with pytest.ExitCode USAGE_ERROR (4), like a conftest.py that fails to import;
  • a plugin that is found but raises while importing -- including a broken pytest11 entry point or a missing plugin dependency -- exits with pytest.ExitCode INTERNAL_ERROR (3), with the traceback preserved.

  pytest.main now returns these codes instead of raising ImportError. Also fixed an IndexError from pytest's own internals when the plugin raised an exception with no arguments.

Deprecations (removal in next major release)

• #14742: The private _pytest.python.CallSpec2 name has been renamed to CallSpec. The old CallSpec2 alias remains available for now and will be removed in pytest 10 or 11.

• #14755: Schedule yield_fixture decorator for removal in pytest 10 or 11.

• #14774: Similarly to the deprecation of class-scoped fixtures defined as instance methods in pytest 9.1, all higher-scoped fixtures (module, package, and session) defined as instance methods are now deprecated.

  They suffer from the same issue the original deprecation only fixed for class-scoped fixtures, see 10819 and 14011.

• #14808: Passing a non-string value to a string-typed ini option now emits a pytest.PytestRemovedIn10Warning. This affects [tool.pytest.ini_options] in pyproject.toml. In pytest 10 this will raise a TypeError, matching the behavior of the corresponding TOML config path.

• #7323: Passing bytes to TerminalReporter.write_line() is now deprecated, pass a str instead.

New features

• #14743: Full diff: now contains a legend explaining the + & - symbols in diff output.
• #2781: When strict_markers is enabled, marker names used in -m expressions are now validated against registered markers.
• #6881: Added the parametrize_long_str_id_strategy configuration option to control how long str/bytes parameter values are handled in auto-generated test IDs. Explicit IDs set via ids=[...] or pytest.param(..., id=...) are not affected. Available strategies: short (default, values over 100 chars fall back to argname+index), sha256 (SHA-256 hex digest), legacy (keep full value), and disallow (error requesting explicit IDs).

Improvements in existing functionality

• #10745: A RecursionError whose recursion origin cannot be located now shows only the first and last 10 stack frames, matching what pytest already did when locating the origin failed outright. Previously the full traceback -- often around a thousand near-identical frames -- was rendered, which was both slow and unreadable. Pass --full-trace to see every frame.

... (truncated)

Commits

• ae1d0ff Prepare release version 9.2.0
• 143ce31 pre-commit: exclude codespell on generated release announcements
• 532dc5f tox: add attrs dependency to regen, needed in reportingdemo.rst
• a7b2446 Merge pull request #15245 from pytest-dev/claude/project-thread-9jcf91
• 679d09c [pre-commit.ci] pre-commit autoupdate (#15266)
• 41d12cd docs: clarify typing for yield fixtures
• b9022ba Merge pull request #15182 from 1871698/docs/improve-getting-started-description
• 16f87a7 docs: improve getting-started.rst test execution description
• 082ed70 Merge pull request #15255 from pytest-dev/claude/project-thread-eoi3d6
• ae37a01 Merge pull request #15227 from pytest-dev/claude/project-thread-4etye4
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore <dependency name> major version will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself)
• @dependabot ignore <dependency name> minor version will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself)
• @dependabot ignore <dependency name> will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself)
• @dependabot unignore <dependency name> will remove all of the ignore conditions of the specified dependency
• @dependabot unignore <dependency name> <ignore condition> will remove the ignore condition of the specified dependency and ignore conditions

[vercel]

The latest updates on your projects. Learn more about Vercel for GitHub.

Project	Deployment	Actions	Updated
tandemcode	Ready	Preview	Nov 1, 2026 9:12am UTC

[coderabbitai]

Important

Review skipped

Bot user detected.

To trigger a single review, invoke the @coderabbitai review command.

Run configuration

• Source mode: Auto
• Repository: Unavailable
• Branch: Unavailable
• File: No configuration file from this repository applied
• Commit: Unavailable
• Layers: defaults
• Review profile: CHILL
• Plan: Advanced
• Run ID: 2952a0f3-d979-4ca5-be1e-ed0e519fe05f

You can disable this status message by setting the reviews.review_status to false in the CodeRabbit configuration file.

Use the checkbox below for a quick retry:

• Trigger review

• Autofix · Keep fixing CodeRabbit findings and required CI, and resolving merge conflicts

Thanks for using CodeRabbit! It's free for OSS, and your support helps us grow. If you like it, consider giving us a shout-out.

Share

• X
• Mastodon
• Reddit
• LinkedIn