Skip to content

About

Open 3D-printable parts for thermodynamic computing, neuromorphic engineering, brain-signal recording and CubeSat education. CadQuery source, CERN-OHL-S v2.

Resources

Contributing

Stars

1 star

Watchers

0 watching

Forks

Repository files navigation

the-consciousness-hardware

Open, 3D-printable parts for thermodynamic computing, neuromorphic engineering, brain-signal recording and small-satellite education. Every part is generated from code (CadQuery), so you can read it, change a parameter and build it again.

License: CERN-OHL-S v2. Attribution is required. If you share a changed design or sell a product made from it, you must publish your changed source under the same license.

Tang Nano 9K case, exploded CAD render

Designs

Design For State
tang-nano-9k-case Sipeed Tang Nano 9K FPGA board, used by the thermospike FPGA reference design v0.1. Fit checked in CAD only. Not printed yet.

Two variants of each part

If you sell prints of these designs, use the store variant. No name or mark of this project may appear on a part that is sold. See NOTICE.

Variant Marks on the part Use
store Part number and license name only Print services
branded Project mark and the source URL Personal prints only. Never sold, never listed on a print service

The shape is the same. Renders use the project's colours: near black background, orange #ff6f40, cream, thin near white edge lines, and the main logo at the bottom right (python render.py <design>). Copies without the logo go to renders/listing/ for print service listings. All parts share one shape language (common/style.py): the same edge radius and chamfer, and a row of vent slots whose lengths follow a Boltzmann distribution, exp(-E / T).

Build

python -m venv .venv
.venv/Scripts/python -m pip install -r requirements.txt   # Windows
# .venv/bin/python -m pip install -r requirements.txt     # Linux, macOS
python build.py           # STL and STEP into designs/<name>/files/, plus fit checks
python build.py --check   # fit checks only
python render.py tang-nano-9k-case

The fit checks fail when a part is not one valid solid, when two parts of a case overlap, or when a case overlaps the simplified board model.

Ready STL and STEP files are attached to each release.

Honest test state

Each design README has a test table. A design is "printed" only after a real print, and "fit tested" only after a real board was mounted in it. Until then, measurements that are not in the manufacturer's drawing are marked as estimates.

Source location

The source of every design is this repository: https://github.com/tlcdv/the-consciousness-hardware. See NOTICE.

Contributing

See CONTRIBUTING.md. Outside contributions need a signed contributor license agreement.

About

Open 3D-printable parts for thermodynamic computing, neuromorphic engineering, brain-signal recording and CubeSat education. CadQuery source, CERN-OHL-S v2.

Resources

Contributing

Stars

1 star

Watchers

0 watching

Forks

Releases

Packages

Contributors

Languages